SUSTAINABILITY SERVICES

cAPABILITY STATEMENT

ABOUT USRamboll Middle East is renowned for its engineering skills and its passion. We are at the forefront of design innovation, applying our experience and technical expertise to a wide range of award-winning projects across the globe.

Ramboll in the Middle East provides services and expertise in the areas of buildings and design, infrastructure, transport, environmental services, renewable energy and oil and gas.

Established in 1983 as Whitbybird, webecame part of the Ramboll group in2007. For 25 years the company hasbeen synonymous with award-winningengineering, design and technicalinnovation, and is recognised as an outstanding place of employment.Holistic philosophies underpin our work -holistic leadership and transparent reporting supported by a drive for long-term, sustainable development. We work with clients who share our vision and values and this extends to our projects - engineering and service solutions that benefit people and their communities throughout the region.

As part of Ramboll, we have a strongpresence in Northern Europe, the UK,

Russia and India, and access to aunique global talent pool of over 8,000dedicated experts. The combinationof Ramboll’s international skills andknowledge pool, coupled with thepassion, innovation and energy inherentin Whitbybird has created a uniqueorganisation – always with sustainabledevelopment at the forefront of ourthinking.

services

SUSTAINABILITY SERVICES

Sustainability has many defi nitions. At Ramboll, we use the UN’s holistic defi nition of sustainable development. We do not see buildings as isolated sustainable systems – we see them as part of neighbourhoods and cities.

A good business

Sustainable construction was once an additional investment reserved for the most idealistic of developers. Today’s soaring energy prices make sustainable construction good business for everyone. The additional investment in low energy buildings is repaid by savings in energy use over the lifetime of the buildings. Sustainable design shows responsible behaviour and is fast becoming “the licence to operate”.

Sustainability features

At Ramboll, we see it as our mission to promote sustainable design

(economically, environmentally and socially sustainable). For each project, we aim to incorporate the sustainable design features most appropriate to each specifi c site. Such features include:

Passive solar design • Energy effi cient design • Wind turbines integrated into the • building Active solar heating • Photovoltaics • Biomass heating • Ground source heat pumps • River or ocean based cooling • Combined heat and power systems • Extensive sedum green roof•

When required, we make sure buildings are certifi ed according to international standards and organisations such as:

The US LEED system • The British BREEAM system • The German Passiv Haus system • The Nordic Svanemærke system • Zero carbon emissions • The Australian Green Star system• The UAE Emirates Green Building • Council The Qatar Green Building Council • The Saudi Green Building Council• The Abu Dhabi UPC Estidama • System

LEED SERVICESThe Leadership in Energy and Environmental Design (LEED) Green Building Rating System, developed by United States Green Building Council (USGBC), provides a suite of standards for environmentally sustainable construction.

In LEED 2009 there are 100 possible base points plus an additional 6 points for Innovation in Design and 4 points for Regional Priority. Buildings can qualify for four levels of certification:

Certified - 40-49 points •Silver - 50-59 points •Gold - 60-79 points •Platinum - 80 points and above •

The projects are assessed under six main categories:

Sustainable Sites (26 Points)•Water Efficiency (10 Points)•Energy & Atmosphere (35 Points)•Materials & Resources (14 Points)•Indoor Environmental Quality (15 •Points)Innovation & Design Process (6 •Points)Regional Priority ( 4 points – NA •outside US)

LEED certified buildings are intended to use resources more efficiently when

compared to conventional buildings thatare simply built to code. LEED certified buildings often provide healthier work and living environments, which contributes to higher productivity and improved occupant health and comfort. The USGBC has compiled a long list of benefits of implementing a LEED strategy which ranges from improving air and water quality to reducing solid waste, benefiting owners, occupiers, and society as a whole.

Energy Modeling

LEED requires energy modeling to assess the energy use of a building and to quantify the savings attributable to the proposed design. Energy modeling optimizes the building design and assists the design team in prioritizing investment strategies that will have the greatestimpact on the building’s energy consumption.

LEED requires energy modeling if any of the 19 points possible under Energy

& Atmosphere Credit 1, for optimizing energy performance, are to be attained. Energy modeling is a continuous process that becomes more detailed and refined as the design progresses.

Our Services

We have provided sustainability and LEED consultancy services on various projects. From LEED concepts to full LEED assessment and supervision, our projects range from high rise buildings to communities and villas, from commercial buildings to hotels & resorts. Our LEED experience includes LEED for New Construction, LEED for Core & Shell, LEED Commercial Interiors, and LEED for Existing buildings, LEED for Neighbourhood Development and LEED for Homes.

ESTIDAMA SERVICESEstidama is an aspiration, a desire to achieve a sustainable way of life in the Arab world

Plan Abu Dhabi 2030 has a clear course for sustainable urban growth and development. Abu Dhabi Urban Planning Council (UPC) has developed a new sustainability Program called Estidama in accordance with this plan.

Pearl Design System

The Pearl Design System is a set of standards and rating methods, uniquely tailor made to the climate of the region. It broadly includes the following five categories:

Living Systems•Livable Buildings•Precious Water•Resourceful Energy•Steward Materials•

The Pearl rating system is used to confirm that proposed project design and strategies are consistent with Estidama goals. There are five levels of certification:

1 Pearl Mandatory•2 Pearl 45%•3 Pearl 60%•4 Pearl 75%•5 Pearl 90%•

Our Services

Our consultancy services include Estidama review and process, development review process, energy modeling, shading analysis and lifecycle analysis based on Estidama

requirements. Our Estidama projects range from hotel resorts, villas and commercial buildings. We have carried out Estidama assessments for community based developments using the community rating system.

Engagement

Ramboll sustainability team has established a strong relationship with the Abu Dhabi Urban Planning Council, who are implementing Estidama. We have been active in the review and progress of Estidama building regulations and as such are contributing to the new tool in the region.

INDOOR ENVIRONMENTAL DESIGNIndoor environmental quality refers to the quality of the internal conditions within the built environment

To design for good indoor environment quality, a multitude of factors need to be considered, some of which include:

Ventilation rates•Indoor temperatures•Relative humidity•Presence of contaminants•Amount of daylight and views•Glare control•

The quality of the indoor environment can significantly impact building occupants. Good indoor quality canlead to:

Increased occupant satisfaction•Enhanced performance/productivity•Reduced absenteeism•Marketing advantage•Reduced liability•Lower operational and maintenance•costs

Ramboll adopts a holistic and integrated approach to indoor environmental quality, and can provide advice /

assistance in the following areas:

Fresh air ventilation optimization•Predicted mean vote assessment •Indoor conditions simulation•Daylight modelling•Glare assessment and reduction •Acoustics design to ensure acoustic •privacy and comfort Indoor air quality measurement and •testingIndoor contaminant mitigation •during designProvision of a high-performance •luminous environment through the careful integration of natural and artificial light sources

With a workforce of over 8,000 employees around the globe, Ramboll has the technical expertise and necessary computing resources to utilize tools such as Computational Fluid Dynamics (CFD) to carry out indoor environment design.

Output from the CFD studies provide

clients with valuable insights and information into complex situations that may be difficult or costly to obtain otherwise.

DISTRICT HEATING AND DISTRICT COOLINGIn hot, urban climates, city-wide district cooling systems are key to the cost-effective use of chilled water. Likewise, district heating systems can deliver heating to commercial buildings from low-carbon sources.

As cities aim to be carbon neutral, District Heating and Cooling systems become more important than ever. Ramboll is among the world’s leading consultancies for the planning, implementation and operation of these city-wide systems. Our district heating and cooling departments work closely together with our departments for waste-to-energy, CHP and renewable energy to provide optimal use of heating and cooling sources.

District heating water

A city-wide, low-temperature district heating system is key to a low-carbon city. The system is cost-effective and can use carbon neutral heat sources, such as that from CHP plants with heat accumulators, waste-to-energy plants, geothermal plants, biomass boilers, large-scale heat pumps and large-scale solar heating plants. Even for small settlements, district heating with thermal storage can be a key component

towards cost effective carbon neutral development.

Ramboll is a leading engineering consultancy in district heating with more than 40 years of experience in Denmark and in more than 25 other countries. Our services include all stages of planning, design, operation, maintenance and management, and include technical, institutional, legal as well as economic aspects of the work. Our international market for these services has been growing, due to increasing concern over climate change. District heating steam and super-heated water

A special system for district heating, based on super-heated water or steam, is used mainly for industrial processes, but also in certain cities and hospitals. Ramboll has 40 years of experience with these systems, including the design of pipe systems with a proven lifetime

of more than 50 years. We also have experience transforming these systems into more efficient, low-temperature systems. District cooling

Decentralised electric chillers in district cooling systems can often be replaced by less expensive systems that use cold seawater, groundwater or carbon-free thermal energy. Our experience in district cooling includes chilled water storage, district cooling absorption chillers and centralised cooling plants. Heating installations in buildings

The efficiency of a city-wide heating system depends on its integration with low-temperature heating systems in buildings. We provide our customers with expertise in the design and operation of all facilities in the system, including building installations.

ENERGY MODELING/ENERGY EFFICIENT DESIGN

Energy modeling involves simulation of building operation based on real time data and weather conditions; the model will provide estimated energy consumption data and help in establishing energy use benchmarks/baselines

Energy modeling helps in making informed decisions on modifications related to energy reduction.

A 3D energy model is built using state of the art IES Virtual Environment software, which has the capability to include almost every potential energy load on the building and estimate the savings when compared with a defi ned base building.

From the results of the simulation, diversified totals of cooling loads can be estimated and hence representing critical plant size and capital costs.

Reduction of these loads can bring significant cost savings. Breakdown of energy requirements indicatedprincipal causual factors, thus identifying potential cost saving areas by reducing requirements.

Detailed energy report entailing:

annual energy demand simulated •hourlyheat gains from the envelope and •occupantbreakdown of energy loads for •lighting, cooling and equipment

Using the energy model, the team can also perform simple payback analysis and life cycle cost analysis which can assist the design team in justifyingsustainable design inclusions such as improved glazing or insulation, and the inclusion of renewable energy devices.

CLIMATE - CO2 REDUCTIONClimate change is one of our greatest challenges in the future. The world’s growing population greatly increase worldwide demand for energy

Reducing climate change

The situation calls for the reduction of gas emissions into the atmosphere. Climate adaptation programmes are underway around the world to prepare for the inevitable effects of climate change. Both climate adaptation and the mitigation of climate change call for a holistic approach. This includes sectors such as infrastructure, energy, urban development, natural resources and traffic.

Ramboll is among the world’s leading consultants, offering planning and implementation services for climate adaptation and projects to analyse and reduce greenhouse gas emissions. We serve both the private and public sector, at the national, regional and local levels. We help our customers quantify the financial consequences of, and find alternative solutions for, problems related to climate change.

Climate strategy

Professional and lasting efforts to reduce greenhouse gas emissions require clear climate strategies. At Ramboll, we collaborate with our customers to produce holistic climate strategies that explore the most realistic and achievable possibilities. For our corporate customers, we make an overall assessment of their emissions, of their Joint Implementation (JI) and Clean Development Mechanisms (CDM), and of their carbon trading.

Potential areas of reduction

For energy-consuming companies, private as well as public, we carry out an overall assessment of potential areas for reducing the emission of greenhouse gasses. We propose solutions such as the use of renewable energy, efficient distribution systems and energy-reducing measures. We consider issues such as the operation of building-mass, transport and land use planning.

Climate calculator

We use the Ramboll climate calculator to calculate climate emissions in general and CO2 reductions in particular. Adapting to each specific situation, the calculator is a useful tool to prepare climate strategies or assess specific reductive measures in different industries.

Climate and the energy sector

Considering the ways we produce, distribute and consume energy is the most important factor in the fight against climate change. We develop and streamline the production, distribution and use of energy in order to reduce emissions, improve our customers’ financial position and ensure a stable supply.

Our services include the planning, design and construction of plants for renewable energy sources like biomass, waste, geothermal, solar and wind. We

“Our approach to sustainable construction throughout all stages of a building project – from planning, design and construction to the operational phase – are part of our approach to protecting our climate with renewable energy, district heating and cooling, and other solutions.”

are involved in CO2 storage projects. For existing energy plants and industrial facilities, we identify potential solutions to reduce CO2 and save energy, and we assess the technical, financial, organisational and hazardous aspects of these solutions.

Climate in urban and traffic planning

Today, most of the world’s population lives in cities, where road traffic is increasing dramatically. Urban climate solutions are needed that combine sustainable urban planning with well-organised infrastructure. Ramboll takes a holistic approach to traffic planning, considering accessibility and local air pollution, including noise and CO2 emissions. Our plans include sustainable infrastructure, tax measures and the use of environmentally friendly and alternative fuel. We include public traffic

and enhanced conditions for cyclists in our strategies to reduce the amount of CO2 emitted by traffic. Building-mass densification in new urban areas and alternative strategies for land use in existing areas are often included in our measures to reduce the levels of CO2

emitted by transport. Climate in the building sector

Buildings interact with other buildings, infrastructure, energy systems and so on. Our approach to sustainable construction throughout all stages of a building project – from planning, design and construction to the operational phase – are part of our approach to protecting our climate with renewable energy, district heating and cooling, and other solutions. We specialise in designing climate shields and other installations to minimise energy loss in

public and commercial buildings as well as private housing.

CARBON MANAGEMENTThere is an increasing focus on energy reduction and carbon emission reduction to businesses. Ramboll’s Carbon Management services provide solutions for businesses to proactively cope with growing carbon risks.

Ramboll quantifies the carbon impact of a business through Carbon Management Services. Carbon Management integrates a strategic framework for managing and reducing carbon as part of the existing business.

Carbon audit

With thorough carbon assessment and audit, the greatest carbon impact areas are identified and targeted for carbon reduction. Carbon Management methodology and plans will be tailored to each business case to keep in line with the company’s goals and strategy.

Carbon reduction

Carbon reduction measures are analyzed with financial/technical feasibility studies such as Life Cycle Assessment (LCA) before carbon reduction solutions are implemented.

Assessment of the Carbon Management plan will be carried out by implementing carbon management into on going

business operations.

Ramboll’s Carbon Management Service will draw an accurate and comprehensive picture of the current carbon standing. We will identify and address carbon issues. In turn, carbon reductions could be achieved by fine-tuning operation process or incorporating new technologies.

BUILDING LIFE CYCLE ASSESSMENT/DESIGNThe environmental impacts andcarbon emissions associated withthe building and constructionsectors are at the centre of climatechange debate.

As a result demand is increasingfrom both the public and privatesectors for low carbon designbuildings. Terms such as ‘embodiedenergy’ and ‘embodied carbonfootprint’ are becoming well known.

Life Cycle Assessment (LCA) isan effective vehicle to analyze thecumulative environmental impactsof a building resulting fromall lifecycle stages. From the initialraw materials to the end of life, LCAevaluates holistic environmentalconsequences of a building such

as embodied energy, carbonemissions, air/water/soil pollutionimpacts, and human health impacts.The results of LCA are utilizedto announce the environmentalperformance of a building, or toidentify inefficiencies or potentialproblems with design and construction.

Benefits

Ascertain the level of carbon •emissions to identify carbon reduction potential

Provide holistic design for •environment (DfE) approach

Market the environmental •performance of a product against competitors

Satisfy requests from customers, •investors, and the public

In line with Corporate Social •Responsibility (CSR) principles

Deliver low carbon footprint and •sustainable building environment

In compliance with the Estidama 5th •rating

ENERGY PLANNING AND STRATEGY

Energy plans, strategies, assessments and long-term policies drive the local, regional, national and even global energy systems of the future. Both the public and private sectors have strong interests in monitoring and improving energy efficiency.

Ramboll offers Energy Planning and Strategy services worldwide, with equal focus on relevant technical, institutional, environmental and economic issues. Our planners have a multidisciplinary approach, focusing on overall environmental impact and least-cost solutions for society and for the individual private customers. We develop realistic and achievable plans, because we work closely with the designers who implement them. We have been a leading consultant in this field for 30 years, with national and local customers in more than 20 countries. Energy management

With a tailor-made energy management system, we give our customers a set of procedures, plans and energy efficiency activities to help them optimise their energy resource use. With this system, customers expect to save between 10 and 25 percent of their total energy consumption.

Our customers include industrial enterprises, housing associations and many other organisations that benefit from an energy management system. Since environmental, quality management and energy management systems are all based on the same principles, they are easily integrated. Energy strategies

We have worked in urban heat planning, developing parallel district heating, cooling and natural gas networks for 30 years. We design and deliver least-cost solutions, such as zoning districts for each energy form (district heating/cooling, block heating/cooling, individual natural gas or individual heat pumps). Our market-oriented approach can include strategies for rehabilitation and reconstruction of worn-out facilities as well as advice on tariff reform, as needed.

Our work with renewable energy strategies focuses on general mechanisms to promote renewable energy, demonstration projects and information campaigns.

We also create strategies to develop the heating and power sectors in a least-cost way for both national agencies and large utilities.

CHP and district heating strategies cover heating and cooling infrastructure as well as heat production options.

Mainly at national level, the energy efficiency strategies we can provide focus on mechanisms to promote energy efficiency, financial incentives, and other ways to overcome barriers to efficiency.

projects

King Abdullah Petroleum Studies & Research Center (KAPSARC) is a community development comprising research centre, community facilities and single family residential buildings in the Kingdom of Saudi Arabia. Ramboll has been appointed the LEED consultant on the community facilities and single family residential building development of the project, advising on green building design and construction practices to the client, architect, engineer, and contractor.

The community facilities with seven buildings are pursuing LEED Platinum under the LEED NC for Multiple Buildings, making it the first LEED

Platinum targeting development in KSA. In addition, the single family residential development of 200 residential buildings is targeting LEED Platinum under the LEED for Homes. This is the first LEED for Homes project outside of the North America.

The project adopts sustainable design and construction practices from the concept stage to achieve LEED Platinum certification and to reduce the carbon footprint of the project from a life cycle perspective. The project introduces multiple on-site renewable energy systems and water saving strategies. In addition, the project limits site

disturbance with considerate design and construction activities management plan while promoting biodiversity through ecology rehabilitation.

Features

LEED Platinum under LEED for •Homes

Community Development•

Sewerage Treatment Plant•

king abdullah petroleum studies and research centreFirst LEED Platinum rated community development in the Middle East

LocationRiyadh, KSA

cLientSaudi Aramco

aRcHitectHOK

engineeRing SeRviceSSustainability services

With views of the Gulf, the coastline, and Dubai, Landmark Tower is the first ever purpose-built maritime center in the world. As an international hub for maritime business, Landmark will provide a luxury hotel, office, and retail services.

Uniting design with sustainability

Ramboll was appointed as both sustainability consultant and facades engineer on this project. Working together, these teams found a solution that preserved the architectural features that are central to the building’s character while also achieving a demanding LEED Gold Rating.

Our teams designed a series of nine light tubes tunneled into the podium, significantly reducing the artificial lighting requirements of the building. These tubes reflect light down into the

nine floors of underground car parking during day time, while reflecting light up from the car parks to provide lighting on the podium levels at night. In an innova-tive twist, they also provide structural support for the large podium.

Our specialist facades team designed the building’s skin to allow the slanting lines of the interior structural columns to be visible from the exterior, essential to keeping the architectural vision of the building, while ensuring the internal environment was not compromised as a result. A special coating has been developed for the glass making up the majority of the façade, while the bays in front of the columns are transparent and uncoated. Our façade engineers have been deeplyinvolved in the process of finding the right type of glass and coating to mini-mize cooling loads.

Our façades team played a further role in the signature look of the building, designing the huge central glass wall that upon completion will give the appearance of a waterfall cascad-ing down its seaward aspect. This key feature will be emphasized by a water-effect lighting scheme to be built into the façade.

To ensure the building secured a LEED Gold Rating, our sustainability team also incorporated renewable energy into the building’s design, in this case through solar panels to heat water, installed at the podium level.

As a result of these design features, and a strict adherence to other LEED criteria, the building will use 20-25% less energy than other similar buildings upon completion.

LANDMARK TOWER

The tallest and defining building of Dubai Maritime City, Landmark Tower is a new mixed-use development designed in the shape of a billowing sail and standing at the apex of city’s headland location

LocationDubai Maritime City, Dubai, UAE

cLientDubai Maritime City

architectNikken Sekkei

engineering ServiceSFire & safetyFacade engineeringSustainability services

The Atrium is a landmark project located in a prime location in the Dubai waterfront development. The project consists of two 70 level towers that merge at the 49th level, with 3 levels of basement parking and common podium level.

Ramboll Middle East provided structural engineering, building services, fire & safety and sustainability consulting advice to achieve a LEED Gold rating, as well as detailed energy modelling for the project. Numerous sustainable design initiatives were included in the project to meet the stringent LEED gold rating requirements.

Photovoltaic panels were located on

the podium level and vertically on the balconies of the building to generate electricity for onsite usage. A special solar ‘crown’ was designed for the upper 50 metres of the building and included banks of solar panels behind the glazing to generate hot water while maintaining the aesthetics of the building. High performance glazing was utilized to reduce the heat gain significantly through the curtain wall façade.

Condensate recycling systems provided a portion of the water for irrigating landscape areas, which used only plants that require low water volumes.

Features

LEED Gold rating•

Facade Integrated PV•

Solar crown for DHW generation•

Condensate Recycling•

The aTriumIconic 70 storey “twin” residential towers

LocationDubai Waterfront, Dubai, UAE

cLientSunland Group

architectPickard Chilton International

engineering ServiceSBuilding services

Fire & safety

Structural engineering

Sustainability services

The Al Falah Neighbourhood Development is a self contained community comprising of two main components – the town centre, and five residential villages.

Within the town centre lies the commercial district where residents living within the community may work and relax. Within the town centre are office blocks, hotels and a large shopping mall, with multiple open green spaces for the use of the residents and the general public.

The five residential villages are identical in terms of space planning. There is a village centre, school and play areas within each village. The aim of the space

masterplan is to provide easy access to everyday amenities. In addition, the green outdoor spaces, numerous footpath and bicycle paths provide residents with the option of outdoor activities within the community.

Each building within the community has been designed with the focus on water and energy consumption. The project is striving to achieve LEED certification for the Shopping Centre in the Town Centre and the neighbourhood as a whole.

AL FALAH NEIGHBOURHOOD DEVELOPMENTSustainable self contained community

LocationAl Falah, Abu Dhabi, UAE

cLientAldar

aRcHitectGHM

engineeRing SeRviceSSustainability services

Features

LEED NC for Shopping Centre•

LEED Neighbourhood for •whole development

Bicycle Paths•

A few miles off the coast of Dubai is The World, continents of man-made islands resembling land masses around the globe. Ramboll sustainability team has been assigned the challenge of making the Greece Island ‘green‘.

Greece is a high density island about 4km away from the Dubai Jumeirah coastline. The project consists of a boutique hotel with 66 residences. Our sustainability team has been involved since the early stages of the development and are working closely with the design team and master developer. The project has been carefully designed to minimize its

environmental impacts by identifying environmental risks and implementing mitigation measures. As a result, good sustainable practices and strategies are being incorporated into the design of the project, which will reduce energy and water consumption of the project. The project targets to be LEED Silver certified on completion.

The development will have more than 5% of it energy generated from renewable sources on the island itself. It will supply for the domestic hot water from solar thermal systems. Recyclable waste will be collected and sent to a recycling facility on shore.

Features

LEED Silver rating•

More than 5% renewable energy•

Solar DHW•

Waste recycling•

V...Greece on the world islandsSustainable reclaimed island off the coast of Dubai

LocationThe World Islands, Dubai, UAE

cLientV... Resorts Ltd

aRcHitectArchitetti Associati

engineeRing SeRviceSSustainability services

Central Market is a large mixed use development comprising several different usage areas, including traditional style souks, new retail areas, and three towers of office, residential and 5 star hotel use. The development is under construction in downtown Abu Dhabi, and will incorporate a large ‘bridge’ section over the current Khalifa street.

Ramboll has been appointed the Sustainability consultant on this project with the aim of achieving various LEED ratings (silver, accredited, etc) for individual development areas.

The project incorporates many innovative sustainable solutions, such as roof-mounted PV panels and wall-mounted solar hot water system on the tower facades to reduce energy

consumption, and significant amounts of garden area on the podium rooftops to reduce the local heat island effect.

Features

LEED and ESTIDAMA ratings•

Multiple ratings•

Fast track program•

CENTRAL MARKETRevolutionary redevelopment in central Abu Dhabi

LocationAbu Dhabi, UAE

cLientAldar Properties

aRcHitectFosters + Partners

engineeRing SeRviceSSustainability services

Director, SuStainability & renewableS

Heath Andersen

T +971 4334 3616

F+971 4 334 3617

Ramboll

PO Box 116921

Emerald Building

Oud Metha Road

Dubai, UAE

contact DetailS