Support Site Brochure

ProductCatalogue

DAMP/WATER/GAS PROOFING & SEALANTS DPC’S COMBIFORM CONCRETE/FORMWORK ACCESSORIES & JOINT FILLERS

GROUND FORM LINTELS TIES & SUPPORT SYSTEMS / CONSTRUCTION CHEMICALS WATER PROOFING & GROUTS DPM GENERAL

CONSTRUCTION PRODUCTS PROTECTION & GEOGRIDS DAMP/WATER/GAS PROOFING & SEALANTS DPC’S COMBIFORM

CONCRETE/FORMWORK ACCESSORIES & JOINT FILLERS GROUND FORM LINTELS TIES & SUPPORT SYSTEMS

Pro

du

ctC

atal

og

ue

IntroductionAbout usSupport Site are the UK’s leading specialist distributor ofBuilding and Civil Engineering Products with a Nationalnetwork of strategically located branches.We are committed to excellence and have had many yearsexperience in supplying the construction industry fromlarge major projects to the smaller customer.

We have an extensive stock profile with many brandleading manufacturers within our portfolio of productoffering and can offer full technical support in all ourbranches with value engineering systems. Support Site areQuality Assured to ISO 18001 with an ongoing controlsystem in place to ensure that the products and systemsare compliant to the high standards that we set ourselves.

ProductsOur products include the following specialisedcategories;• Concrete Accessories• Construction Chemicals• Brickwork products• Waterproofing Materials• Geotextiles and Groundwork Engineering

We have a full range of these products in all ourbranches nationwide but welcome any enquiries forother products.

The Personal TouchOur courteous and experienced staff are available tooffer advice and technical help and to take your ordersand process them quickly. Our nationwide network ofbranches are open 5 days per week and we strive todeliver within 24 hours (UK Mainland). Our missionstatement is “Right first time”.

Just a phone call awayWherever you are in Great Britain, Support Site is just aphone call away with a branch near you who can supplyyour construction needs quickly and efficiently, pleaserefer to the back cover for branch details or visitwww.supportsite.co.uk.

Buying PowerPart of SIG PLC we have the backing of a multinationalbuilding materials group ensuring long-term financialstability.

Support Site On-Site ServiceOur area sales managers can offer immediate on siteassistance anywhere in the UK to ensure that you receivethe best advice and service when and where you need it.

They can specifically offer advice on problems toengineering designs with various product system options.

For any information please contact you localbranch or visit www.supportsite.co.uk

This Catalogue is the official publication for Support Site,produced by the Senior Management. For editorial enquiriesplease contact the Editor ([email protected]) or fax01234 268057. Any views and opinions expressed are solely thoseof the author and do not necessarily reflect Support Site or SIGTrading Ltd’s policy. All rights reserved. No copying by any meansis permitted, except when permission is given in writing bySupport Site or SIG Trading Ltd.This publication contains manufacturers’ product information thatis reproduced by Support Site in good faith, based on the latestknowledge available. Whilst every effort has been made to ensurethat the information is current and correct, as distributors SupportSite cannot accept responsibility for the application andperformance levels of the products featured. Neither can weaccept responsibility where the manufacturers’ instructions havenot been followed. © Support Site 2006

Designed & produced by PickeringHutchins Ltd01799 543925/www.pickeringhutchins.com

W W W . S U P P O R T S I T E . C O . U K

Con

tent

s WaterproofingWaterproofing Membranes . . . . . . . . . . . . . . . . . . . 1Liquid Tanking Membranes . . . . . . . . . . . . . . . . . 14Waterstops and Waterplugs . . . . . . . . . . . . . . . . . 20Cementitious Waterproofing . . . . . . . . . . . . . . . . . 32Waterproofing Admixtures . . . . . . . . . . . . . . . . . . 36

Brickwork ProductsDamp Proof Courses . . . . . . . . . . . . . . . . . . . . . . . 40Cavity Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Wall Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Concrete and Formwork AccessoriesConcrete Accessories . . . . . . . . . . . . . . . . . . . . . . 70Grouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Formwork Accessories . . . . . . . . . . . . . . . . . . . . . 82Column Formers . . . . . . . . . . . . . . . . . . . . . . . . . . . 87MBT Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Slab Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 97Curing Compounds . . . . . . . . . . . . . . . . . . . . . . . . 99

Concrete RepairAdomast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Ardex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Flexcrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Fosroc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Sika . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Weber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Groundwork EngineeringGas Barrier Systems . . . . . . . . . . . . . . . . . . . . . . . 118Geotextiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Damp Proof Membranes . . . . . . . . . . . . . . . . . . . 126Groundwork Protection . . . . . . . . . . . . . . . . . . . . 127Gabions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Accessories, Tools and Safety EquipmentApplicator Guns . . . . . . . . . . . . . . . . . . . . . . . . . . 130Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Sprayers and Mixers . . . . . . . . . . . . . . . . . . . . . . 131Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 136

IndexiiIn

dex

F O C U S , S P E C I A L I S A T I O N A N D S E R V I C E

Adcor 500S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Adcor 500S Adhesive / Mastic . . . . . . . . . . . . . . . 24Adjustable Kickers . . . . . . . . . . . . . . . . . . . . . . . . . 72Adoclean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Adocure Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Adocure WW / WWT / Standard / Super /

Super AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Adofill / Adofoam / Adolease / Adoseal /

Adotard (MF) & (TF) / Adostrike . . . . . . . . . . . . 82Adopatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Adotuf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Aluminium ‘T’ Bar . . . . . . . . . . . . . . . . . . . . . . . . . . 97Ancon Balcony Connectors . . . . . . . . . . . . . . . . . . 94Ancon Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Ancon Channel Ties . . . . . . . . . . . . . . . . . . . . . . . . 54Ancon Continuity System . . . . . . . . . . . . . . . . . . . . 84Ancon Frame Cramps . . . . . . . . . . . . . . . . . . . . . . 54Ancon Head Restraints . . . . . . . . . . . . . . . . . . . . . 55 Ancon Masonry Reinforcement . . . . . . . . . . . . . . 58Ancon MBT Couplers . . . . . . . . . . . . . . . . . . . . . . . 92 Ancon Punching Shear Reinforcement . . . . . . . . 95Ancon Remedial Wall Ties . . . . . . . . . . . . . . . . . . . 56Ancon Shear Load Connectors . . . . . . . . . . . . . . . 93Ancon Sliding Anchors . . . . . . . . . . . . . . . . . . . . . 56Ancon Wall Starters . . . . . . . . . . . . . . . . . . . . . . . . 54Ancon Windposts . . . . . . . . . . . . . . . . . . . . . . . . . . 57Angle Formers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Antinox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Applicator Guns . . . . . . . . . . . . . . . . . . . . . . . . . . 130Aquagard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Aquamac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Ardex A45 / A46 . . . . . . . . . . . . . . . . . . . . . . . . . . 107Armourtape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Autoway / Autogrid . . . . . . . . . . . . . . . . . . . . . . . 123

Bar Bond Breaking Compound . . . . . . . . . . . . . . . 74Barrel Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Barrier Fence & Pins . . . . . . . . . . . . . . . . . . . . . . . 136Bentorub + / Bentorub Salt . . . . . . . . . . . . . . . . . . 28Bithuthene MRX / 2000 / 3000 / 4000 / 8000 /

4000DW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bitugard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Bitugard No.35 / No.39 Adhesive /

Cavity Tray Fixing Pin . . . . . . . . . . . . . . . . . . . . . 43Bitumen Impregnated Boards / Sheets / Strips 101Bituminous Primer . . . . . . . . . . . . . . . . . . . . . . . . 118Bitusheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Bitusheet Gas Barrier . . . . . . . . . . . . . . . . . . . . . . 119Bitusheet Mastic / Primer . . . . . . . . . . . . . . . . . . 119Bitusheet Reinforcing Strip / Tape . . . . . . . . . . . 119Bitusheet XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Bituthene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bituthene LM . . . . . . . . . . . . . . . . . . . . . . . . . . . .6/15Bituthene Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bituthene Protection Boards / Tapes /

Bitustik 4000 / Bitutape 4000 . . . . . . . . . . . . . . . 5Black Annealed Tying Wire . . . . . . . . . . . . . . . . . . 72Bottom ‘Y’ Crack Inducer . . . . . . . . . . . . . . . . . . . . 97Brickclean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Brickforce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Bricktor CCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Bubble Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Buckets STD and Flexitubs . . . . . . . . . . . . . . . . . 136Bull Float . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Cardboard Bolt Boxes . . . . . . . . . . . . . . . . . . . . . . 77Cavi60 WCA / Cavi90 / Cavi240 PWIB . . . . . . . . 48Cavibrick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Cavity Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/9CellWeb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Cementitious Coating 851 . . . . . . . . . . . . . . . 33/108Chemical Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . 132Circular Mesh Spacers . . . . . . . . . . . . . . . . . . . . . . 71Cloaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Closed Cell Polyethylene Sheets /

Strips / Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Closed Cell Polyethelene foam . . . . . . . . . . . . . . 67Colpor 200PF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Combiform Floor Levelling Screed

Rail System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Compriband . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Conbextra GP / HF . . . . . . . . . . . . . . . . . . . . . . . . 78Concrete Curing Tank . . . . . . . . . . . . . . . . . . . . . 131Concrete Scoop . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Concrete Spacers: Arched Based

(Double or Triple Cover) Flat Based (Single or Double Cover) / Mesh Castle / Square Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Contact Adhesive . . . . . . . . . . . . . . . . . . . . . . . . 100Continuous Hy-Chairs / Flat Top Hy-Chairs . . . . 71Continuous Plastic Spacer . . . . . . . . . . . . . . . . . . . 74

D2000 / Dacablock Fire Rated DPC / Frame Formers / Supafix / TF1000 / TF2000 . . 50

Damcor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Degreasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Dekguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Double Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Double Loop Ties & Tying Tool . . . . . . . . . . . . . . . 72Dowel & Tie Bars . . . . . . . . . . . . . . . . . . . . . . . . . . 73Dowel Bar Cradles / Caps /

Sleeves & Foam Plugs . . . . . . . . . . . . . . . . . . . . . 73Drill Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Dual Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Dual Seal Granules / Mastic . . . . . . . . . . . . . . . . . 13Dual Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Dualtite Hydrophilic Expansion Joint . . . . . . . . . . 27Dust Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Eurocourse DPC HP / XL / Colourmatch . . . . . . 45EuroWeep-vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Exmet Reinforcement . . . . . . . . . . . . . . . . . . . . . . . 62Expanded Metal Bolt Boxes . . . . . . . . . . . . . . . . . 77Expocrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Extra Long Connector . . . . . . . . . . . . . . . . . . . . . . . 81

Fabric Reinforcement . . . . . . . . . . . . . . . . . . . . . . . 80Fastfill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21/108Fibertex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Filtram B1 / 1B1 / 1C1 / 1BZ

and Frost & Salt Barrier . . . . . . . . . . . . . . . . . . 122Fisher Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Fivestar / SP / weber.cem grout

(construction grout) . . . . . . . . . . . . . . . . . . . . . . 79Fixing Insert with pin . . . . . . . . . . . . . . . . . . . . . . . 96Flexiseal / Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Foambond / Foambond Guns . . . . . . . . . . . . . . . . 82Fosroc Primer 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Fosroc Primer 7 . . . . . . . . . . . . . . . . . . . . . . . . . . .102Frame Formers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Index iii


Frost Blankets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Funnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

G930 Combination Airbrick . . . . . . . . . . . . . . . . . . 66G935 Combination Cavity Sleeve . . . . . . . . . . . . . 66G950 Weep Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 G951 Peep Weep . . . . . . . . . . . . . . . . . . . . . . . . . . 66G960 Telescopic Under Floor Void Ventilator . . . 66G961 Vertical Extension Sleeve . . . . . . . . . . . . . . . 66G962 Remote Void Ventilator . . . . . . . . . . . . . . . . 66Gabions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Gasgard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Gasgard Jointing Strip . . . . . . . . . . . . . . . . . . . . . 118GasSeal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Gastite DPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Gastite DPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Gastite LL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Geotextiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Grace Protection Board . . . . . . . . . . . . . . . . . . . . . 16Grade Plate Spacers . . . . . . . . . . . . . . . . . . . . . . . . 90Gripfill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Hard Hats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Hazard Barrier Tape . . . . . . . . . . . . . . . . . . . . . . . 136 H.D. Protection Board . . . . . . . . . . . . . . . . . . . . . . . 12Helibar Crack Stitching . . . . . . . . . . . . . . . . . . . . . 58Hessian Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Heviseal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hex Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81High Performance Steel Anchors . . . . . . . . . . . . 134Holding Down Bolts . . . . . . . . . . . . . . . . . . . . . . . . 76Homegard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Hydrocell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Hydrocoat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hydroduct 200 / 220 / Coil 150 . . . . . . . . . . . . . . . . 7Hydromat Powder . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Hydrotite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Hyload DPC Fixing Strip / Fixing Pins/ Joint Support

System / Jointing Tape / Lap Adhesive / Mastic /Contact adhesive / Mastic Tape . . . . . . . . . 41/47

Hyload Housebuilder . . . . . . . . . . . . . . . . . . . . . . . 40Hyload MortarMatch . . . . . . . . . . . . . . . . . . . . . . . 40Hyload Original . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Hyload Preformed Cloaks . . . . . . . . . . . . . . . . . . . 42Hy-Rib Permanent Formwork . . . . . . . . . . . . . . . . 89

IKOpro Fast Dry / SA Bitumen Primers . . . . . . . . 11Insulation Fixings . . . . . . . . . . . . . . . . . . . . . . . . . 134

Korkpak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

LAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Leaded Cavity Trays . . . . . . . . . . . . . . . . . . . . . . . . 65Lifting Sockets and Loops / Hoops / Inserts . . . 96Line & Spot Markers . . . . . . . . . . . . . . . . . . . . . . 136Lintels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Lokfix S25 / P25 . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Long Shaft Fixings . . . . . . . . . . . . . . . . . . . . . . . . 133

Measuring Jugs . . . . . . . . . . . . . . . . . . . . . . . . . . 136Megafilm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Monolevel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Monolite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Monomix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Mulseal DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Multiprufe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Nitobond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110/37Nitofil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Nitokit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Nitomortar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Nitoprime Zincrich . . . . . . . . . . . . . . . . . . . . . . . . 110Notched Leveller . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Patchroc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Paveroc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Permabit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Permanent Formwork System . . . . . . . . . . . . . . . . 89Pile Cage Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . 75PlasDrain.12 / PlasFlow.25 Structural Drainage . 12Plasprufe MP / 2000SA / 3100 / 3100HD . . . . . . 11Plasprufe Protection Board . . . . . . . . . . . . . . . . . . 11Plaster Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Plastic Hand Float . . . . . . . . . . . . . . . . . . . . . . . . . 131Plastic Stoppers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Plastic Wheel Spacers . . . . . . . . . . . . . . . . . . . . . . 75Polystyrene (Expanded) Sheets . . . . . . . . . . . . . . . 95Polystyrene Adhesive . . . . . . . . . . . . . . . . . . . . . . . 95 Polystyrene Bolt Boxes . . . . . . . . . . . . . . . . . . . . . . 77 Polystyrene Dissolver . . . . . . . . . . . . . . . . . . . . . . . 77Polystyrene Void Formers . . . . . . . . . . . . . . . . . . . . 95 Polythene DPC / Jointing System . . . . . . . . . . 45/47Polythene DPM . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Power Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Preprufe 300R, 160R . . . . . . . . . . . . . . . . . . . . . . . . . 6Preprufe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Procor 10, 20 / Concrete Sealer . . . . . . . . . . . . . . 16Proofex 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Proofex Engage / Engage Detail Strip . . . . . . . . . . 4Proofex Hydromat . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Proofex LM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/15Proofex LM Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Proofex Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Proofex Total Tape / Top Hats . . . . . . . . . . . . . . . 118 Promaseal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Protection Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76PVC Edgetie 210 / 260 . . . . . . . . . . . . . . . . . . . . . . 25PVC Groutcheck Tape . . . . . . . . . . . . . . . . . . . . . . 83

Re-bar Protection Caps . . . . . . . . . . . . . . . . . . . . 136Renderoc GP / HB / S / LA / DS . . . . . . . . . . . . 109Renderoc Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Resin Bonded Cork Sheets . . . . . . . . . . . . . . . . . 101Resinex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Resomast Bedding / Mortar / Putty /

Thixobond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Rhyno GW8118 / GW8123 / GW8129 / GW8143 /

GW8161 / GW8180 . . . . . . . . . . . . . . . . . . . . . . 124RIW Aggregate, Grade 1 & Grade 2 / Cleaning

Solvent / Flexiseal Primer . . . . . . . . . . . . . . . . . . 18RIW Sealing Compound / Granules /

Waterstop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10RIW Adhesive Tape / Brick Plugs / Overtape /

Plaster Plugs / Sealing Rope / Sealing Tape / TopEdging Strip / X Cramps . . . . . . . . . . . . . . . . . . . . 9

RIW Waterstop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Ronafix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Ruberclose Insulated DPC . . . . . . . . . . . . . . . . . . . 41

IndexivIn

dex


Safety & Personal Protection Equipment . . . . . . 136SBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37SCP Waterstops . . . . . . . . . . . . . . . . . . . . . . . . .27/28 Screed Chairs (Metal / Plastic) . . . . . . . . . . . . . . . 74Servijoint One DW . . . . . . . . . . . . . . . . . . . . . . . . . 16Servipak 3 Protection Board . . . . . . . . . . . . . . . . . 16Serviseal 195 / 240 / K320 / Pilecap . . . . . . . . . . 26Servistrip AH205 . . . . . . . . . . . . . . . . . . . . . . . . . . 26Servitite 150 / 230 / 305 . . . . . . . . . . . . . . . . . . . . 26Servitite AT 200 / AT 240 . . . . . . . . . . . . . . . . . . . . 25Sheetdrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Sheetseal 226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Sheetseal Adhesive Tape / Primers /

Protection Boards . . . . . . . . . . . . . . . . . . . . . . . . . 8Shims (Precast) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Shims (Plastic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Side Slab Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Sika 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Sika 1 Finishing Mortar / Render Mortar /

Screed Mortar / Spritz & Bonding Coat Mortar 37Sika 2 / 3 / 4 & 4A . . . . . . . . . . . . . . . . . . . . . . . . . 29Sika Damp Proofing Slurry . . . . . . . . . . . . . . . . . . 34Sika Grout 212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Sika Injectoflex . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Sikacem 810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37SikaColor 671 W . . . . . . . . . . . . . . . . . . . . . . . . . . 113 SikaDur 31 / 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . 112SikaDur 41 / 43HB / 52 / 53 / 53LV . . . . . . . . . . 113Sikagard 550 W Elastic / ElastoColor 675 W /

680 S / 680 S Clear Glaze . . . . . . . . . . . . . . . . 113SikaSwell 2003, 2010H, 2507H . . . . . . . . . . . . . . . 30SikaTop 121 / 122 / 122 HB / Armatec 110 34/112SikaTop Seal 107 . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Silicone Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Slabdrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Slip Membrane . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Slump Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Soffit Vent Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Sonotube / Plus / Polygonal / Premium . . . . . . . . 87Spiked Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Spiked Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Sprayers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Squeegy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Stainless Steel Tying Wire . . . . . . . . . . . . . . . . . . . 72StoneCor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Straight Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Structureseal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Supastik E10 Adhesive . . . . . . . . . . . . . . . . . . . . . . 24Supercast Butyl-Nek / Butyl-Nek Primer . . . . . . 22Supercast Hydrofoil / Hydrofoil TS . . . . . . . . . . . . 22Supercast Joco 10 . . . . . . . . . . . . . . . . . . . . . . . . . 23Supercast Rearguard S / Rearguard TS . . . . . . . 22Supercast SW10, SW20 / SW Adhesive / SWX . 23Supercast Synkoflex / Synkoflex FR / Primer . . . 24Supercast Twinstop . . . . . . . . . . . . . . . . . . . . . . . . . 21 Superstop Self Swelling Waterstop . . . . . . . . . . . 29Support Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Swelltite Hydrophilic . . . . . . . . . . . . . . . . . . . . . . . . 28 Synthaprufe Original / LAC . . . . . . . . . . . . . . . . . . 19

Tape: Double Sided / Duct / Gaffa / Masking / Guns . . . . . . . . . . . . . . . . . . . . . . 12/130

Tek Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Telegrid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Telescopic Adjustable Ventilator . . . . . . . . . . . 64/66

Tell Tales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Temax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Terram 1000 / Advantage / 2000 / 3000 / 4000 121Terram 26C /, 35C / 42A . . . . . . . . . . . . . . . . . . . 121 TerramGrid W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Thermabate Accessories . . . . . . . . . . . . . . . . . . . . 49Thermabate Insulated Cavity Closer . . . . . . . . . . . 49 Thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Thioflex 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Thioflex One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102Thoroseal / Thoroseal Super . . . . . . . . . . . . . . . . . 33Thoro Waterplug . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Threaded studding Nuts & Screws . . . . . . . . . . . 76Thruty Cones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Thruty Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Tie Bar System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Tiefill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Toughseal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Trinter Mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Trowels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Two Part Crack Inducer / Joint Former . . . . . . . . 97Type TAV to Round Connector . . . . . . . . . . . . . . . 64TypeW Cavitray Weep Vent . . . . . . . . . . . . . . . . . . 65

Uraswell Hydrophilic Sealant . . . . . . . . . . . . . . . . 29

Vandex BB 75 / 75 E / White . . . . . . . . . . . . . . . . . 35 Vandex Elasticizer PK 75 . . . . . . . . . . . . . . . . . . . . 35Vandex Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Vandex Super . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Visqueen CO2 Gas Membrane . . . . . . . . . . . . . . 120Visqueen Gas Resistant GR . . . . . . . . . . . . . . . . . . 45Visqueen Methane Membrane . . . . . . . . . . . . . . 120Visqueen Radon System . . . . . . . . . . . . . . . . . . . 120Vista Brickwork Ties . . . . . . . . . . . . . . . . . . . . . . . . 59 Vista Cast-In / Face Fix Channel System . . . . . . . 60 Vista Head Restraint . . . . . . . . . . . . . . . . . . . . . . . . 60 Void Formers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Waler Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Wall Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Walldrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Walldrain Anchor Plug / Membrane Washers /

Soft Washer Fixing / Washered Nails . . . . . . . . 13Water Barrier Connector . . . . . . . . . . . . . . . . . . . . 81Watering Cans . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Waterstop Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . 31Weber.cem Fairing Coat . . . . . . . . . . . . . . . . . . . . 114Weber.cem HB30 / HB40 . . . . . . . . . . . . . . . . . . . 114Weber.cem Keycoat . . . . . . . . . . . . . . . . . . . . . . . 114 Weber.certite Mortar . . . . . . . . . . . . . . . . . . . . . . 115 Weber.cote Coatings . . . . . . . . . . . . . . . . . . . . . . . 116Weber.tec EP IK / EP Injection Resin / EP Injection

Resin T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Weber.cem Pyrapatch . . . . . . . . . . . . . . . . . . . . . . 114Weber.cem Pyratop . . . . . . . . . . . . . . . . . . . . . . . . 114 Welding Knife – Large Electric Knife

(110V or 220V) . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Wing Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Wire Snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

XHD Hydrofoil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Zedex CPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Zedex CPT Jointing System . . . . . . . . . . . . . . . . . . 44Zedex Housing Grade DPC . . . . . . . . . . . . . . . . . . 44

Wat

erpr

oofin

g

1Waterproofing Membranes 1Liquid Tanking Membranes 14Waterstops and Waterplugs 20Cementitious Waterproofing 32Waterproofing Admixtures 36

Wat

erpr

oofin

g

Waterproofing Membranes


Wat

erpr

oofin

gPreparation and applicationguidelines

At air temperatures below +4°Cmeasures should be taken to ensure thatall surfaces are free from ice or frost.

Some waterproofing membranes also actas gas membranes, please also checkthe Groundwork Engineering section.

Horizontal application - the membranemust be applied to smooth preparedsubstrate. Concrete blinding is preferredbut a well rolled granular fill with acompacted sand blinding is acceptable.The substrate shall be free from looseaggregate or other sharp protrusions.

Standing water must be removed toprevent contamination of overlaps andsubsequent compromise of waterproofproperties.

Vertical application - the membrane isapplied to formwork or adjoiningstructures.

Membrane installation

Cut the membrane to a convenientlength for installation. Carefully align themembrane and roll it out with the ribbedsurface uppermost. Lay adjacent sheetsaccurately so they overlap the previoussheet 75mm along the self adhesiveedge. When laying adjacent full rollsthere should be a stagger of half a rolllength to avoid a build up of end jointsin one area.

End joints and cut edges - butt join thesheets onto a detail strip. The topsurface of the join can be further sealedwith a liquid membrane and reinforcedwith mesh. This overseal should extend75mm either side of the formed joint.

All overlaps and joints should be firmlyrolled to ensure complete adhesionbetween layers.

Products Page

Proofex 3Proofex Engage 4Proofex Hydromat 4

Bituthene 5Preprufe 6Hydroduct 7

Sheetseal 8Double Drain 9Plaster Drain 9Cavity Drain 9Structureseal 10

Plasprufe 11

Bitusheet 12Dual Seal 13Walldrain 13Slabdrain 13

B U I L D I N G P R O D U C T S




If cold or damp conditions prevail theself edge adhesive may be madetackier by wiping with a solvent. DetailStrip may be gently warmed with aslack flamed gas torch or heat gun toremove moisture and promote initialadhesion in cold conditions. Thisprocedure may also be used to assistbending the membrane through 90degrees at the floor to wall junction.

Membrane Protection Boards

Protection Boards are a tough, flexiblebitumen impregnated cellulose boardused for the protection of waterproofmembranes against mechanicaldamage, pedestrian or vehicular trafficand abrasion caused by backfilling. Theboard is resistant to water, ground saltsand most corrosive chemicals. Theyshould be butt jointed and supportedduring backfilling. Membrane mastic,mastic tape or contact adhesive can beused to spot bond the board to themembranes. The joints should bestaggered and also staggered over themembrane laps.

Primer

All surfaces except those below groundbearing slabs and membranes shouldbe primed with one coat of Primerapplied at a rate of approx. 10m2 perlitre. A one part bituminous solution forbrush or spray application. Apply byclean brush or spray to the clean dryconcrete surface. Apply evenly andavoid pooling and over application.Allow to dry before laying themembrane.

Reinforcing Tape

Self Adhesive Reinforcing Tapecomprises of a cross-laminated high-density polyethylene sheet coated with

a Bitumen Polymer Adhesive and isfaced with a release sheet.

Adhesive Tape

Tape is a double-sided and selfadhesive and designed to be used inconjunction with the Protection Boardsto adhere it to dry surfaces ofmembranes. It may be used in ‘pads’150mm square, or in strips of suitablelength. It can also be used to adhere toother materials, such as polyethylenesheets or similar and to most ‘dried’membranes.

Detailing

The sheet membrane on its own doesnot offer the complete waterproofingsystem. To ensure watertight results,details like pipe penetration, up standsand coves have to be dealt with. Eachmanufacturer deals with these in adifferent manner and which mayinvolve liquids or granules.

Bentonite Granules

A high swelling sodium bentonite ingranular form which reacts when incontact with water and forms animpervious gel, used in conjunctionwith Waterproofing Membranes to forma fillet at wall to floor transitions andpenetrations through horizontalsurfaces.


Wat

erpr

oofin

g

3Waterproofing Membranes


Proofex 3000

Proofex 3000Proofex 3000 is a high performance self-adhesivemembrane for a range of waterproofingapplications including basements andsubstructures. Proofex 3000 provides a vapourand waterproof membrane to water excludingstructures and protects concrete from attack byaggressive ground salts.

Ancillaries

Proofex LMTwo component bituminous liquid membrane for waterproofing of underground structures andintricate details in conjunction with Proofex waterproofing systems.

CavitydrainA high-density polyethylene drained cavity former for waterproofing of substructures.

SheetdrainA geocomposite HDPE drainage sheet with thermobonded polypropylene filter.

ProofexType Width Length Roll Area Edge Laps End Laps3000 1m 20m 20m2 50mm min 150mm min

Proofex LMSize28kg pack

CavitydrainType Size FixingsCavitydrain 0.97 x 50m rolls Approx 60 per roll

SheetdrainThickness Roll Width Roll Length8mm 1.1m 25m16mm 1.1m 25m

4

Wat

erpr

oofin

gWaterproofing Membranes


Proofex Engage Engage | LM | LM Mesh

Proofex EngageProofex Engage is a pre-applied waterproofing membrane which mechanically bonds topoured concrete, remaining in place if settlement of substrate occurs.

Ancillaries

Proofex LMA two component applied trowelable membrane for sealingaround intricate details such as pipe entries, penetrations, pilecaps, etc.

Proofex Engage Detail StripA reinforced, double sided waterproof adhesive tape forsealing and jointing roll ends, cut edges corner pieces. Itconsists of a strong synthetic fibre fabric impregnated and coated both sides with a bitumenrubber adhesive. Each side of the tape is protected by a removable siliconised paper.

Proofex LM MeshA reinforced mesh used in conjunction with Proofex LM for areas of extreme loading (covings,edges and pipe penetrations).

Proofex EngageThickness Width Length Edge Laps End Lengths Weight

Engage 4-5mm 1.27m 30m 68mm Butt jointed 58kgDetail Strip 1.5mm 200mm 10mLM 3.3mm 28kgLM Mesh Nominal 100m 50m

Ancillaries

Hydromat PowderTo ensure watertight continuity during detailing work and for sealing around awkwardgeometrical shapes, it may be necessary to cover an area with loose natural sodium bentonitepowder.

Proofex Hydromat Hydromat | Powder

Proofex HydromatProofex Hydromat is a bentonite waterproofing membrane with unique surface bentoniteimpregnation for impermeable lap joints.

Proofex HydromatRoll Size Roll Weight Thickness1.2m x 2.42m 18kg 7mm dry2.42m x 15m 210kg 7mm dry

Hydromat PowderSize30kg bag



Bituthene® MRX | 2000 | 3000 | 4000 | 8000 | 4000DW

Bituthene® Membranes – Basement/substructure waterproofing and vapour proofing.Bituthene® is a range of flexible preformed post-applied basement waterproofing and vapourproofing membranes. Bituthene membranes are available in all grades to suit all climates,damp surface or green concrete application. Chemically resistant to provide effective externalprotection against aggressive soils, contaminated water, dilute acids and alkalis.

Bituthene® MRX – Methane, CO2 and Radon resistant grade of Bituthene. Suitable for drysurface applications only.Bituthene® 2000 – For use below screeds. Suitable for dry surface applications only.Bituthene® 3000 – For basements and substructures. Methane, CO2 and radon gasprotection. Suitable for dry surface applications only.Bituthene® 4000 – For basements and substructures. Methane, CO2 and radon gasprotection. Suitable for application to damp surfaces and green concrete.Bituthene® 8000 – A Superior performance waterproofing membrane for basements andsubstructures. 70m hydrostatic pressure resistance with ultra low moisture transmission rate.Methane CO2 and radon gas protection. Suitable for application to damp surfaces and greenconcrete.Bituthene® 4000 DW – Designed specifically for waterproofing roofs of drinking waterstructures. Suitable for application to damp surfaces and green concrete.

Ancillaries

Bituthene® PrimersSpecially formulated one part primers for sealing concrete and masonry surfaces to promoteadhesion of Bituthene membranes.

Bituthene® Protection Boards and tapesRobust, non degradable bitumen boards to provide protection to Bituthene membranes againstbackfill.

Bituthene®

Type Roll size Primer Application temp rangeBituthene MRX 1 x 20m (20m2) B1 +4 to +35°CBituthene 2000 1 x 25m (25m2) B1 +4 to +35°CBituthene 3000 1 x 20m (20m2) B1 +4 to +35°CBituthene 4000 1 x 20m (20m2) B2 -10 to + 35°CBituthene 8000 1 x 20m (20m2) B2 -10 to + 35°CBituthene 4000 DW 1 x 20m (20m2) B2 -10 to + 35°C

Bituthene PrimersType SizePrimer B1- dry surface application only 5 & 25 litres ( Approx 10m2/litre)Primer B2 - dry/damp surface and green concrete application 5 & 25 litres ( Approx 10m2/litre)

Bituthene Protection BoardsType SizeBituthene Protection Board 3, 6, 12mm x 1m x 2mBitustik™ 4000 (Adhere board to Bituthene) 150mm x 12m rollsBitutape™ 4000 (tape for over laps) 70mm x 20m rollsPack Adhesive 5 litres

6

Wat

erpr

oofin



Preprufe® 300R | 160R

Ancillaries

Preprufe® TapeFor sealing overlaps at Preprufe roll ends and cut ends.

Bituthene® LMTwo component elastomeric cold applied liquid detailing compound. Foruse where liquid applied waterproofing is necessary to ensure watertightcontinuity, such as pile terminations, pipe penetrations, internal cornersand membrane continuity through masonry walls. Bituthene LM cures toform a tough seamless rubber-like waterproof layer.

PreprufeType Thickness Roll Size Roll Area Roll Weigh300R 1.2mm 1.2 x 30m 36m2 50kg160R 0.8mm 1.2 x 35m 42m2 42kg

Preprufe TapeType Thickness Roll Size Roll WeightLT 0.7mm 100mm x 15m 2kg

Bituthene LMType Size Bithuthene LM 5.7 litres

Preprufe®

Pre-applied waterproof membranes for basements and substructures that develop acontinuous mechanical bond to poured concrete preventing water migration between thestructure and the membrane, substantially reducing the risk of leaks. Preprufe 300R & 160Ralso provide protection against methane, CO2 and radon gas. For use below slabs and onreinforced concrete basement walls. Preprufe membranes are composite sheets comprising arobust HPDE backing, a pressure sensitive adhesive and a trafficable weather resistantcoating.

Preprufe 300R – under slabs greater than 350mm thick.Preprufe 160 R – under slabs less than 350mm thick and vertical applications.



Hydroduct® 200 | 220 | Coil 150

Hydroduct® Vertical Drainage SheetsCreep resistant drainage sheets are prefabricated geocomposites comprising studdedpolystyrene drainage cores covered with polypropylene filter fabric. They provide cost effectivealternatives to traditional aggregate drainage.

Hydroduct® 200 – Polypropylene spun bonded filter fabric on one face of a 11mm studdeddrainage core. Applied to walls of basements that have been waterproofed with Bituthenemembranes and protected with Bituthene Protection Boards.

Hydroduct® 220 – Polypropylene spun bonded filter fabric on one face of a 11mm studdeddrainage core with a bonded plastic film on the other. Applied to walls of basements that havebeen waterproofed with Bituthene membranes. Also applied to existing basement walls andpermanent shuttering prior to the application of Preprufe membranes.

Hydroduct® Coil 150 – Polypropylene non-woven filter fabric encapsulating a 25mm studdeddrainage core. Installed at the bottom of basement walls and linked to the Hydroduct drainagesheet.

Ancillaries

HydroductType Thickness Roll Size Roll Area Roll WeightHydroduct 200 11mm 1.25m x 32m long 40m2 40kgHydroduct 220 11mm 1.25m x 32m long 40m2 40kgHydroduct Coil 150 25mm 150, 240mm x 30.5m long

Hydroduct AncillariesType Roll SizeCut fastners (jointing) Strip 8 x 4 dimples, 5 supplied per rollBitutstik™ 4000 (jointing) 150mm x 12m longBitutape™ 4000 (jointing) 70mm x 20m long

8

Wat

erpr

oofin



Sheetseal 226

Ancillaries

Membrane PrimersSheetseal primer is a bitumen solution.

Membrane Protection BoardsBitumen Protection Board is a tough, flexible bitumen impregnated board used for theprotection of waterproof membranes against mechanical damage, pedestrian or vehiculartraffic and abrasion caused by backfilling.

Adhesive TapeAdhesive Tape is a double-sided tape, designed to be used in conjunction with theBitumen Protection Board to adhere it to dry surfaces of bituminous type membranes. It may be used in ‘pads’ 150mm square, or in strips of suitable length. It can also be used to adhere to other materials, such as polyethylene sheets or similar, to most ‘dried’RIW membranes.

SheetsealType Thickness Roll Size Weight226 1.6mm 1050mm x 19.05m 1.7kg/m2

226 1.6mm 300mm x 20m 1.7kg/m2

226 1.6mm 150mm x 20m 1.7kg/m2

Sheetseal PrimersType Size CoverageSheetseal Primer 5 litres 7m2/litreSheetseal Primer 25 litres 7m2/litre

Bitumen Protection Board/Adhesive TapeType Size Thickness WeightBitumen Protection Boards 0.9 x 1.28m 3mm 3kg/m2

Adhesive Tape 150mm x 15m 2mm 4kg/roll

SheetsealSheetseal is a cold applied, self adhesive bitumen sheet waterproofing membrane. It istypically used as an external basement tanking system or ground floor DPM, particularlywhere large unobstructed areas are to be waterproofed.



Double Drain

Double DrainDouble Drain is an impermeable high density polyethylene profiled sheetincorporating a permeable geotextile filter fabric designed to preventground water reaching a structure and to protect and enhance theperformance of the waterproof membranes.

Double DrainThickness Roll Size Weight8mm 2 x 15m 0.62kg/m2

Plaster DrainThickness Roll Size Weight Overall Thickness0.5mm 2m x 20m 0.48kg/m2 5mm

Plaster DrainPlaster Drain is an internal drainage system manufactured from clear high densitypolyethylene with 5mm undercut studs in a dovetail shape which forms the key for plaster andrender finishes in above and below ground situations.

Plaster Drain

Cavity Drain P5 l P20

Cavity DrainCavity Drain is an internal tanking drainage system used to collect waterentering the basements and sub-structures and channel it to a sump orcollection point for disposal. P20 is used mainly on floors but can alsobe used for walls. P5 is used only for walls.

Ancillaries

RIW Top Edging StripA high-density profiled polyethylene sheetwhich protects the top edge of the RIWDouble Drain and prevents clogging.

RIW X CrampsA fixing aid for locating and mechanicallysecuring the system to the substrate.

RIW OvertapeButyl rubber tape, with a nonwovenpolypropylene surface, for sealing over jointsin the membrane.

RIW Plaster PlugsA plastic plug for fixing membrane tostructure.

RIW Sealing TapeA self-adhesive tape to seal joints betweenthe RIW Wall / Floor Junction and membrane.

RIW Sealing RopeA self-adhesive rope for sealing betweenindividual sheets and around services, fixingsetc.

RIW Brick PlugsA fixing plug for vertical fixing of the CavityDrain.

RIW Wall / Floor Junction A pre-formed corner piece for assisting insealing around corners and services.

RIW Adhesive TapeA double-sided tape for adhering the RIWWall / Floor Junction.

Cavity DrainType Roll Size Weight Overall ThicknessP5 2.07m x 20m 0.48kg/m2 5mmP20 2m x 20m 0.95kg/m2 20mm

10

Wat

erpr

oofin



Ancillaries

WaterstopWaterstop is an active bentonite based waterstop that is designed to replace passivePVC/Rubber type waterbars thereby eliminating the requirement of special pieces and seamwelding.Waterstop is not designed for, or intended to function as an expansion joint sealant.

Sealing CompoundSealing Compound is a trowel-grade, sodium bentonite / butyl-rubber based sealant,designed for a variety of surface preparation and waterproofing detail work, for use withthe RIW Structureseal system. Being a bentonite based material, Sealing Compound swellsupon contact with water to seal against water intrusion. With the consistency of thickgrease, Sealing Compound is easy to apply and bonds to most materials.

StructuresealType Thickness Roll Size Roll WeightStructureseal 6.4mm 1.1m x 5m 35–40kg

WaterstopType Size Supplied asRIW Waterstop 25 x 19mm 5m long coils

Sealing CompoundType Size WeightSealing Compound 14.25 litres 18kg

GranulesGranules are chemically treated sodium bentonite granules, which are used as a detailingaccessory product, with the RIW Structureseal system. When hydrated and in containment,the Granules form into a dense, impermeable material, that combines with the sodiumbentonite in Structureseal to form a seamless waterproof membrane.

Washers40mm hardened nail with 30mm premounted washer for securing the RIW Structurseal toconcrete by hand nailing or shot firing.

Staple GunA manual stapler for fixing sheets of Structurseal together at laps etc.

GranulesType Size Granules 20kg tub

StructuresealStructureseal is waterproofing composite of high swellingSodium Bentonite encapsulated between a non-wovenand woven geotextile. When confined under pressurewithin a structure the swelling is controlled, forming adense, monolithic, impervious waterproofing membrane.

Structureseal




PlasprufePlasprufe is a range of SBS polymer modified bitumen waterproofing systems for use in castconcrete, brick and blockwork constructions, both internally and externally, to protect buildingsagainst water from the ground. All Plasprufe membranes have BBA certification.Plasprufe MP is a multi-purpose, self adhesive damp proof and tanking membrane. Plasprufe 2000SA is a tougher, more durable self adhesive damp proof and tankingmembrane.Plasprufe 3100 is a high performance torch applied tanking membrane, ideally suited fortanking in cold and damp conditions. Excellent lap adhesion and security is achieved by torchapplication. Plasprufe 3100HD is a high performance torch applied tanking membrane, ideally suited fortanking in cold and damp conditions. It has a tough, non-woven polyester fibre facing, whicheliminates the need for a separate protection board when externally tanking. Excellent lapadhesion and security is achieved by torch application.

Ancillaries

IKOpro SA Bitumen PrimerA rubber-modified bituminous priming solution designed to seal and prepare surfaces for theapplication of self-adhesive damp proofing or tanking membranes. It is fast-drying and is idealfor ensuring a long-term bond between the surface and subsequent membranes beingapplied. It may be applied to many substrates including concrete, wood, brickwork, blockworkand metal.

IKOpro Fast Dry PrimerA quick-drying and deep-penetrating priming solution designed to sealand prepare surfaces for the application of torch applied tankingmembranes. IKOpro Fast Dry Primer dries in approximately 30 minutes at20°C, depending on the substrate, and leaves no residual tack. Suitablefor use on dry or slightly damp surfaces. It may be applied to manysubstrates including concrete, wood, brickwork, blockwork and metal.

PlasprufeType Size ThicknessPlasprufe MP 20m x 1m 1.5mmPlasprufe 2000 SA 15m x 1m 2.0mmPlasprufe 3100 10m x 1m 3.0mmPlasprufe 3100 HD 10m x 1m 3.7mm

Plasprufe Protection PrimersType Size CoverageIKOpro SA Bitumen Primer 5, 25 litre cans Concrete 3-4 m2/litre, Metal 10-15 m2/litreIKOpro Fast Dry Primer 5, 25 litre cans Concrete 3-4 m2/litre, Metal 10-15 m2/litre

Plasprufe MP | 2000SA | 3100 | 3100HD

Plasprufe Protection Board A tough, flexible polymeric board for protecting tanking membranes against mechanicaldamage, pedestrian or vehicular traffic and abrasion caused by backfilling. PlasprufeProtection Board also protects against ground salts and most corrosive chemicals.

Membrane Protection BoardsType Thickness SizePlasprufe Protection Board 1.5mm 2m x 1m Plasprufe Protection Board 3.0mm 2m x 1m

12

Wat

erpr

oofin



PlasDrain.12 and PlasFlow.25 Structural Drainage SystemsPlasdrain is a high performance geocomposite drainage layer that offers distinct benefits overaggregate filter beds. Plasdrain.12 structural drainage systems have been specificallydeveloped to provide high flow capacity while offering protection to Plasprufe tankingmembranes. PlasDrain.12 should be used in conjunction with PlasFlow.25 flow drain.

Structural Drainage SystemsType Size PlasDrain.12 50m x 1.1mPlasFlow.25 50m x 100mm

BitusheetType Size XL 1.05 x 19.05m

Bitusheet XLBitusheet waterproofing membranes consists of a self bonding polymermodified bitumen which is covered on one side by a tough two ply crosslaminated polythene film and protected on the other side by a releasesheet which is removed prior to the bonding of the material on to asuitably prepared substrate. Once the release sheet has been removed themembrane can be easily applied by roller pressure.

Bitusheet XL Membrane

Ancillaries

HD Protection BoardsBitusheet HD Protection Board is a tough, flexible polymeric board specifically developed forprotecting the Bitusheet range of self adhesive waterproofing membranes, against mechanicaldamage, foot and normal site traffic and abrasive backfill materials. Due to its high strengthand excellent puncture resistance the Bitusheet HD Protection Board exceeds theperformance of thicker protection boards. It can be easily cut and shaped on site.

Bitusheet PrimerA one part bituminous solution for brush or spray application.

TapesReinforcing (XL) TapeBitusheet Self Adhesive Reinforcing Tape comprises of a cross-laminated high-densitypolyethylene sheet coated with a Bitumen Polymer Adhesive faced with a release sheet.

Double Sided TapeSelf Adhesive Double Sided Tape comprises of a Polymer Modified Bitumen 1.5mm thick facedon both sides with a release sheet.

Bitusheet HD Protection BoardsType Thickness Sheet Size WeightHD Protection Board 1.5mm 2m x 1m 2.5kg/m2

HD Protection Board 3.0mm 2m x 1m 5.0kg/m2

Bitusheet PrimerType Size CoverageBitusheet Primer 5, 25 litres 12m2/litre

TapesType Roll Width Roll LengthReinforcing Tape 100, 150, 300mm 20mDouble Sided Tape 100, 150, 200mm 15m



Walldrain Slabdrain

WalldrainWalldrain consists of a cuspated lightweight plastic core bonded to a geotextile fibre filter. Thefibre will permit free entry of water, but not soil, and so prevent soil particles from cloggingdrainage systems. Walldrain is designed to be placed with the geotextile filter layer facing thedirection of the water seepage or backfill.

SlabdrainSlabdrain is a cavity drain former manufactured from a dimpled H.D.P.E, designed to provide adrainage channel beneath the concrete in floor and wall construction. The former is providedwith selvedges to enable joints to be sealed to give a water and gas tight membrane.

Ancillaries

Soft Washer FixingFast, reliable fixing for membranes,mesh or insulation.

WalldrainRoll Size12mm x 1m x 50m25mm x 0.9m x 50m

SlabdrainRoll Size Thickness1m x 50m 10, 20mm

Soft Washer FixingSize Box QuantityNail 37mm Washer 36mm 150

Anchor PlugDrill 8mm hole and set with hammer. Use mastictape to form a washer seal under head.

Anchor PlugSize Box Quantity8 x 75 100

Membrane WashersFor use with washered nails.

Membraned WashersSize Box Quantity19, 32mm 100

Washered Nails

Washered NailsSize Box Quantity25, 30, 40mm 500

Ancillaries

Dual Seal MasticA trowlable mastic comprising of a special formulation of expandable minerals and elastomericcompound which expands and stiffens in the presence of water to form an impervious barrierto water penetration. Size: 19 litres.Dual Seal GranulesA high swelling sodium bentonite in granular form which reacts when in contact with waterand forms an impervious gel. Size: 22.7kg (23.6 litres) bags.Bitusheet XL TapeUsed as an overband tape for the sealing of membranes to membranes. Size: 100,150, 300mmroll widths, all rolls are 20m in length.

Dual Seal

Dual Seal is a high performance self swelling, self healing waterproofingmembrane comprising of a thick, tough, high density polyethylene sheetlaminated to 4kg/m2 of quality Bentonite granules. The Bentonite used in themanufacture of Dual Seal is capable of repeated cycles of wetting and dryingwithout deterioration of its sealing properties and has a life expectancymeasured in thousands of years. It has WRAS approval for use with potablewater and is BBA Certified.

Dual SealType HDPE Thickness Membrane Thickness Roll Width Roll Length Coverage Per RollHDPE 0.5mm 5.0mm 1.22m 7.32m 8.51m2

14

Wat

erpr

oofin



14

Wat

erpr

oofin

gLiquid Membranes

Products in this section range fromsimple bituminous paints for theprotection of steel and concrete fromwater, through to bitumen latexcompounds to two part epoxides givingprotection from abrasion andchemicals as well.

There are also others that can be usedas part of sheet membrane systems fordetail work.

Products Page

Mulseal DP 15Proofex LM 15

Bituthene LM 15Procor 16

Aquamac 16

Flexiseal/Heviseal 17Hydrocoat 17LAC 18Toughseal 18

Synthaprufe 19

Multiprufe 19


Liquid Membranes

15


Mulseal DP

Proofex LM

Ancillaries

Fosroc Primer 3Metal and timber surfaces must be primed with acoat of Primer 3 before applying Mulseal DP.

MulsealDPType Size CoverageMulseal DP 5, 25, 200 litres 1.1 - 1.4m2/litre**Depending on surface texture.

Fosroc Primer 3Type Size Fosroc Primer 3 5, 25 litres

Proofex LMType Size Proofex LM 28kg pack

Mulseal DPMulseal DP is a bitumen rubber/latex compound designed for usein waterproofing applications. Mulseal is suitable for uses such aswaterproof membrane to retaining walls, as a vapour barrier topanels and repairing fine cracks in asphalt surfaces.

Proofex LMTwo component bituminous liquid membrane for waterproofing ofunderground structures and intricate details in conjunction withProofex waterproofing systems. A rubber emulsion with specialhydraulically hardening fillers. It can be applied to damp surfaces and resists hydrostatic head of up to 70 metres. Proofex LM issolvent-free, resistant to aggressive ground water and is applied bytrowel.

Liquid Membranes

Bituthene® LM

Bituthene Liquid MembraneType Size Bithuthene LM 5.7 litre pack

Bituthene Liquid MembraneApproximate Coverage Rates Bithuthene LM 5.7 Litre Pack2.5mm thick x 300mm wide 7.6 lin metres2.5mm thick x 2 x 150mm wide with 20mm fillet 6.0 lin metres20mm fillet 28.4 lin metres

Bituthene® Liquid MembraneTwo component elastomeric cold applied liquid detailing compound. For use where liquid applied waterproofing is necessary to ensurewatertight continuity, such as pile terminations, pipe penetrations,internal corners and membrane continuity through masonry walls.Bituthene LM cures to form a tough seamless rubber-like waterprooflayer.

16

Wat

erpr

oofin

g


Liquid Membranes

Procor® 10 | 20

Procor®

Procor® is a two component, synthetic rubber, liquid waterproofing membrane. It cures to forma resilient, fully bonded elastomeric sheet. Procor® will protect structures against water andwater vapour ingress. At a single coat thickness of 1.5mm, Procor® will resist a hydrostatichead in excess of 20m when fully loaded. Damp surface tolerant, can be applied to greenconcrete and damp to touch surfaces.

Procor® 10: Trowelling grade for horizontal surfaces. Also recommended for verticalapplication at temperatures less than 12°C.

Procor® 20: Trowelling grade for vertical surfaces at application temperatures above 12°C.

Procor® Concrete SealerProcor® Concrete Sealer is a water-based surface conditioner designed to mitigate problemsassociated with the application of Procor® to cast concrete and masonry substrates in conditionswhere an air or vapour drive is likely to cause blistering or pin-holing of the Procor® surface.

Aquamac Bituminous Black PaintA solvent-borne bituminous black paint. For the protection of ferrous andnon-ferrous metals, concrete roofing felt, fibre cement, corrugated iron,asphalt and wood against water.

Ancillaries

Procor®

Type Size CoverageProcor® 20 7.5 litres 4.5m2/unitProcor® 10 (Summer Pack) 20 litres 12m2/unitProcor® 10 (Winter Pack) 7.5 litres 4.5m2/unit

Procor® Conrete SealerType SizeProcor Concrete Sealer 18.9 litre buckets

AquamacSizes Coverage5, 25 litre approx 6.5m2/litre

Procor®

Type Size Grace® Protection Board 1.0m x 2.0mServipak® 3 Protection Board 1.0m x 2.0mArmourtape™ 75mm x 10m rollHydroduct® 200 1.25m x 32mPreprufe® Tape 100mm x 15m rollServijoint® One DW 310mlAdcor® 500S 6 x 5m rollsBitutape™ 4000 70mm x 20m roll

Procor® Concrete Sealer

Aquamac Bituminous Black Paint

17


Liquid Membranes

Flexiseal

FlexisealFlexiseal is a two colour, seamless and fully bondedliquid applied waterproof coating based on polyurethanetechnology. RIW Flexiseal cures by drawing moisturefrom the air to form a highly flexible but durable barrierto water and water vapour and is typically used where ahigh performance tanking system is required. Availablein black or grey.

Ancillaries

FlexisealType Size CoveragRIW Flexiseal 6, 25kg 2m2/kg/coatRIW Flexiseal Primer 5, 20 litres 8m2/litre

Protection Board/SheetsealType SizeRIW Protection Board 3mm x 1.285m x 1.625mRIW Sheetseal 9000 DPC Available in standard sizes

HevisealHeviseal is typically used to provide a protective coating to concrete or steel superstructures orother structures such as retaining walls, plinths etc. RIW Heviseal is suitable as a waterproofmembrane, for periodic maintenance onto existing flat roof area. The membrane can also beused on parapet walls, gutters, planters, ponds and water storage tanks. Heviseal has excellentU.V. resistance.

HevisealType Size CoverageHeviseal 5, 20 litres 1.5m2 per litre/coat

Heviseal

Hydrocoat

HydrocoatType Size CoverageRIW Hydrocoat 5 litre Tins 3m2/litre in 2 coats

25 litre Drums 3m2/litre in 2 coats205 litre Barrels 3m2/litre in 2 coats

HydrocoatHydrocoat is an easily applied, high build black bitumen paint, which dries to a water andwater vapour proof finish. It may be easily applied to most building substrates.

18

Wat

erpr

oofin

g


LACLiquid Asphaltic Composition is typically used as a damp proof membrane to ground floors, asa vapour barrier behind cladding and for tanking of basements. It is also suitable forwaterproofing foundation walls, ducts, lintels, columns, beams and similar structures at, aboveand below ground level and as a radon barrier.

Sheetseal 226

Ancillaries

Ancillaries

LACType Sizes Coverage for two coatsRIW Liquid Asphaltic Composition 5 litres 1m2/litre (typical 2 coats )

25 litres 1.25m2/litre (steelwork 2 coats)205 litres

SheetsealSizes150, 300mm x 20mAlso see page 8

Aggregate/SolventType SizeAggregate, Grade 1 25kgAggregate, Grade 2 25kgCleaning Solvent 5 litresFlexiseal 6, 25kg

LAC

ToughsealToughseal is typically used to provide a water and water vapour proof barrier, or to giveprotection against abrasion, fresh and salt water, carbon dioxide, alkalis and dilute mineralacids. It is resistant to U.V. light and atmospheric attack. Suitable uses for Toughseal include,raised access floors, ground floor slabs, swimming pool wet areas and shower areas, plantrooms, sewage plants and marine applications. When dressed with a suitable aggregate it willprovide a slip retardant wearing surface or a waterproof key for tile bedding or renders.Available in black or grey.

ToughsealType Size CoverageToughseal 5, 20 litres 4m2/litre/coat

Toughseal

Liquid Membranes

19


MultiprufeA thixotropic cold applied rubberised bitumen emulsion which dries to provide a tough, blackflexible coating for brickwork, concrete and steel. Can be used for waterproofing columns etc.,and general purpose ‘black jack’. Complies with specification for Roads and Bridges DOEclause 2006 (s) Waterproofing for structures.

MultiprufeType SizeMultiprufe 5, 25, 205 litresCoverage: 4–6m2/Litre per coat depending on surface

Multiprufe

Liquid Membranes

Synthaprufe Original IKOpro Synthaprufe Original is a high performance, brush applied damp proofing emulsioncontaining synthetic rubber latex which provides a waterproof and vapour resistant, blackelastomeric membrane.

Synthaprufe Original exhibits low odour, with exceptional flexibility and crack resistance, evenat low temperatures and offers excellent resistance to sulphates and other soil salts. Whensuitably protected, Synthaprufe will be effective through the life of the building. Synthaprufebonds with great strength to a range of building materials.

For use as damp proofing of concrete,brick, blockwork and masonry, with vertical surfaces being finished with a gypsum based plaster system. Adhesive for unsealed wood block flooring (min 10mm thick). Suitable for tanking of basements.

Synthaprufe LAC High performanceliquid damp proof membraneIKOpro Synthaprufe LAC is a highperformance waterproofing liquid used asa damp proof membrane and water-repellent coating, prior to the erection of masonry. It forms a flexible membrane when curedand provides an effective barrier to water and water vapour.

Synthaprufe LAC is easy to apply and is suitable for use in the most demanding site locations.For use in waterproofing of foundations, retaining walls, abutments, steel columns, beams,lintels and structures where cladding is to form the outer leaf.

SynthaprufeType Size CoverageSynthaprufe Original 5, 25 litre cans Floors: 1st coat 1m2/litre; 2nd coat 1.5m2/litre

Walls: 3 coats each 2m2/litreSynthaprufe LAC 5, 25 litre cans Metal surfaces: 1st coat 2.5m2/litre; 2nd coat 2.5m2/litre

All other surfaces: 1st coat 1.5m2/litre; 2nd coat 2.5m2/litre

B U I L D I N G P R O D U C T SSynthaprufe Original | LAC

20

Wat

erpr

oofin



20

Waterstops and Waterplugs

Prevention of water ingress andoutgress into a structure is of vitalimportance. This section showsproducts that stop the flow in twodifferent ways.

Waterstops.

The prevention of ingress duringconstruction, they are cast intoconstruction joints and take fourdifferent forms;

• PVC strips cast centrally or on theface to provide a physical barrier tothe passage of water (see FosrocSupercast)

• Hydrophilic strips placed in jointswhich expand when in contact withwater to seal the joint (see GraceAH205). There are alsocombinations of PVC andhydrophilic (see SCP Dualtite)

• Injection hoses cast in throughwhich resins can be pumped ifleaks occur (see Sika Injectoflex)

• Hydrophilic sealants which alsoswell in contact with water (seeSCP Uraswell)

Waterplugs

Are used to seal leaks that occur afterconstruction, these come as in twoformats;

• Liquids that are added to cement indifferent concentrations to givedifferent speed of set

• Powder products that just need theaddition of water

Products Page

Thoro Waterplug 21

Fastfill WP 21

Renderoc Plug 21Supercast 21

Adcor 500S 24AT System 25PVC Edgetie 25Serviseal 26Servistrip AH205 26Servitite 26

Waterstop 27

Dual Stop 27Dualtite 27PVC Waterstop Profiles 28Swelltite 28Superstop 29Uraswell 29

Sika 2, 3, 4, 4A 29Sika Swell 30Sika Injectoflex 30

Hydrotite 30

Plug 30

PVC Profiles 31


21



Thoro Waterplug

Thoro WaterplugThoro Waterplug is a blend of hydraulic cements, well graded sands and chemical additivessupplied in a dry powder form. It requires only the addition of clean water to produce a readyto use, ultra rapid setting plugging mortar.

Thoro WaterplugType SizesThoro Waterplug 5, 25kgCoverage: 1kg powder will fill 585cm3

Fastfill WP

Fastfill WPFastfill WP is a safe and simple to use ultra-rapid setting mortar for arresting water seepageand infiltration under pressure through cracks, joints and voids in concrete and masonry priorto the application of cementitious coatings and mortars. It is a single component, polymermodified, fibre reinforced mortar based on shrinkage compensated Portland Cement, which isnon caustic in use.

Fastfill WPType Sizes YieldFastfill WP 8kg 4.25 litres per 8kgCoverage: 1kg powder will fill 530cm3

Renderoc Plug

Renderoc PlugRenderoc Plug is a rapid setting mortar which is easy to apply to horizontal, vertical or overheadsurfaces at a wide range of thicknesses. There are two grades available:Renderoc Plug 1 with an initial set time of approximately 1 minute, andRenderoc Plug 20 with an initial set time of approximately 20 minutes.(Set times are based on ambient/substrate temperatures of 20°C.)

Renderoc PlugType Size CoverageRenderoc Plug 1 6kg bags 3 litresRenderoc Plug 20 25kg bags 12.5 litres

Supercast TwinstopType SizesSupercast Rearguard TS 250mmSupercast Hydrofoil TS 250mm

Supercast Twinstop

Supercast TwinstopSupercast Twinstop has been specially designed to provide significantadvantages over co-extruded hydrophilic waterstops. This enables the PVCwaterstop to be fixed on site in the usual way and provides the additionalbenefit of two hydrophilic elements treated with a retarded swell coating,thus avoiding the common problem of hydrophilic pre-swell on site.

A range of prefabricated junctions and intersections is available, also see generic profilesand accessories on page 31.

22

Wat

erpr

oofin

g



Supercast Butyl-NekSupercast Butyl-Nek is a rubber/bitumen pre-formed flexible sealing strip specifically used toprovide a permanent watertight joint for pre-cast units which are jointed together on site.Applications include joints in manholes, inspection chambers, box culverts and concrete pipes.This easily compressible product is designed to completely seal and fill the annular spacebetween pre-cast units regardless of shape or size. Supercast Butyl-Nek associated productshave a 50-year proven track record in the most extreme situations and are specified and usedby pre-casters and contractors worldwide.

Supercast Butyl-NekType SizesSupercast Butyl-Nek 12mm x 60mm

12mm x 80mm12mm x 120mm18mm x 18mm22mm x 22mm25mm x 40mm

Supercast Butyl-Nek - PrimerType SizesSupercast Butyl-Nek Primer 5, 25 litres

Supercast Butyl-Nek

Ancillaries

Supercast Hydrofoil

Supercast HydrofoilThe Supercast range of PVC waterstops is designedto provide an integral sealing system for movementand construction joints in concrete cast in-situ.Centre bulb sections are used in expansion,contraction and construction joints. The centre bulballows for movements in a structure to beaccommodated whilst its hexagonal design providesa flat surface. This allows shuttering and joint fillersto fit snugly. All centrally placed Supercastwaterstops incorporate an eyeletted, reinforced edge flange. This enables them to be easilypositioned by wiring to surrounding reinforcement.

Supercast HydrofoilType SizesSupercast Hydrofoil Section width Roll weight Roll length

250mm 27.1kg 12m200mm 27.3kg 15m

Rearguard S 250mm 33.4kg 12m200mm 24.0kg 12m

XHD Hydrofoil 250mm 42.9kg 10mA range of prefabricated junctions and intersections is available, also see generic profiles and accessories

on page 31.

23



Supercast Joco 10Type SizesSupercast Joco 10 14mm x 20m coil

Supercast Joco 10

Supercast Joco 10Multiple injection hose for protection against potential and active leaks in concrete structures.

Supercast Joco 10 is a resin injection system developed toprovide increased water integrity for construction joints in waterretaining and excluding structures i.e. tanks and basements.

Supercast SW SW10 | SW20

Supercast SW10 and SW20 The Supercast SW range consists of swellable waterstops;Supercast SW formed sections, Supercast SWX gun-appliedpaste and Supercast SW adhesive. Supercast SW sections aremade from high performance synthetic elastomeric strips. Theswelling action of the Supercast SW range is the result ofcontact between water and hydrophilic groups which are anintimate part of the Supercast SW polymeric structure. Thesehydrophilic groups are not subject to extraction and loss ofswelling performance by prolonged or repeated wetting.Expansion of the waterstop creates a positive pressure againstthe faces of the concrete joint, thus preventing water passing through the joint.

Ancillaries

Supercast SW10 and SW20 Type Sizes CoverageSupercast SW10 5mm x 20mm x 15m rolls Usually single run of strip per jointSupercast SW20 10mm x 20mm x 5m rolls Usually single run of strip per joint

Supercast SWType Size CoverageSupercast SWX 310ml cartridge 1.5m @ 16mm bead per cartridgeSupercast SW Adhesive 380ml cartridge Approx 13m @ 5mm bead per cartridge

24

Wat

erpr

oofin

g


Supercast Synkoflex Supercast Synkoflex is a unique non-swelling, pre-formed plastic adhesive waterstop thatbonds fast to cured concrete surfaces and fuses with fresh concrete. Supercast Synkoflexoffers a host of practical advantages in application. It provides watertight integrity forconstruction joints in concrete structures in places where swellable waterstops are not bestsuited, such as bund walls and thin section walls and slabs. It has exceptional adhesion andmalleability, making it an excellent choice for steel sheet piling/floor slab joints. SupercastSynkoflex comes with an extensive track record of more than 30 years proven reliability onmajor projects in the USA - now extending to Scandinavia, the UK and other major Europeancountries.

Ancillaries

Supercast Synkoflex Type Sizes QuantitySupercast Synkoflex 25mm x 25mm Box of 25mm x 1m stripsSupercast Synkoflex FR 12mm x 30mm Box of 6mm x 5m rolls

Supercast Synkoflex Type SizeSupercast Synkoflex Primer 3.79 litres

18.9 litresSupastik E10 Adhesive 2 litres

Supercast Synkoflex


Adcor® 500S

Adcor® 500SA conformable, swellable polymer/butyl rubber waterstop strip for construction joints thatexpands in contact with water. When fully encapsulated by poured concrete, the expansiveforces form a seal against concrete faces. The seal resists hydrostatic pressure, stopping waterfrom entering sub-structures. Adcor® is a unique product that has been specifically developedto provide better performance than conventional swellable rubber waterstops.

Ancillaries

Adcor 500SType SizeAdcor 500S 5m rolls

6 rolls/carton30 cartons/pallet

Adcor Mastic 310ml cartridgeAdcor Adhesive MS 310ml cartridge

Adcor 500SType Size Adcor 500S Mesh Profile 1m strips, 30 strips/bundleLarge Secura Clips Each

25



AT SystemAT System waterstops have been specially developed for water excluding andretaining structures such as basements, reservoirs, sewage treatment works, etc. TheAT System is an important advance in concrete joint protection which combinesActive Technology with the conventional mechanical properties of PVC waterstops.Conventional PVC waterstops work by the normal action of the concrete shrinkingaway from the joint and against one face of the ribs or bulbs of the waterstop. Thiscreates positive pressure on the rib or bulb causing a “valve action” to resist wateringress. However, this shrinkage movement also forms an inevitable void on theopposite face of the rib or bulb which can allow water under high pressure to trackalong the waterstop searching for a path to bypass the waterstop. Subsequentcyclical movement of the joint can compound the problem resulting in furtherleakage. AT System waterstops mechanical properties prevent water ingress by thesame valve action but also actively seal the void around the rib or bulb to stop waterbypassing or migrating. The hollow core of the bulb deforms to control the expansiveforces to prevent damage to the concrete.

Servitite® AT 200 (10mm web thickness) – an internally placed waterstop, whichis cast centrally in the comcrete to resist internal and external water pressure.Serviseal® AT 240 – can be cast on the external face for water excluding structures such asbasements or sub structures or ground bearing slabs only of water retaining structures.

AT System

PVC EdgetieTM

PVC EdgetieTM

PVC Edgetie™ (5mm web thickness) is an internally cast passive waterstop systemmanufactured in a range of sizes for sealing construction and expansion joints in concretestructures subject to water pressure.

Ancillaries

Small 20mm Secua Clips – To tie Servitite AT 200 to reinforcementJointing Jig – jig AT systemWelding Knife – Large electric knife (110V or 220V)

PVC EdgetieType Size WeightPVC Edgetie 210 10m coil 18.3kgPVC Edgetie 260 7.5kg 19.6kg

AT SystemType Sizes Servitite® AT 200 7.5m long coil, weight 20.2kgServiseal® AT 240 7.5m long coil, weight 25.1kg

A range of prefabricated junctions and intersections is available, alsosee generic profiles and accessories on page 31.

A range of prefabricated junctions and intersections is available, alsosee generic profiles and accessories on page 31.

Ancillaries

Jointing Jig – jig AT systemWelding Knife – Large electric knife (110V or 220V)

26

Wat

erpr

oofin

g



Serviseal®

Serviseal® is a passive external PVC waterstop system manufactured in a range of sizes forprotecting joints in concrete basements and sub-structures. Serviseal external flexiblewaterstop systems have a proven design using four T shaped ribs for solid embedment ininsitu concrete which create a valve action to seal the water path, and are suitable forhorizontal and vertical applications. Being cast into the outside water face prevents the ingressof moisture and protects the outer layer of reinforcement from corrosion. Location on theoutside face of a concrete member also promotes better compaction of the concrete aroundthe ribs of the Serviseal since it is free from reinforcement congestion and the weight of wetconcrete makes consolidation easier.Seviseal can be used for non suspended slabs in water retaining structures such as reservoirs,swimming pools and sewage treatment works.

ServisealType Size WeightServiseal 195 10m coil 19.7kgServiseal 240 7.5m coil 21.5kgServiseal K320 7.5m coil 23.8kgServiseal Pilecap 7.5m coil 24.0kg

Serviseal®

Servitite®

Servitite® (10mm web thickness) is an internally cast specially formulated PVC waterstopsystem manufactured in a range of sizes for use in reinforced concrete structures. Being castinto the centre of the concrete member, Servitite® waterstops will provide resistance againsthigh hydrostatic pressure from both faces. It is essential to form a continuous waterstopnetwork at all joints to prevent the ingress or escape of moisture/water. For changes ofdirection or profile only factory produced fabrications should be used with site jointing limitedto simple butt welds.

ServitieType Size WeightServitite 150 7.5m rolls 20.5kgServitite 230 5.0m rolls 24.7kgServitite 305 5.0m rolls 27.2kgSee Tools and Accessories Section for Accessories.

Servitite®

Servistrip® AH205

Servistrip® AH205Servistrip® AH205 is a hydrophilic solid rubber strip that exceeds the performance of thinlycoated or hollow swellable strips. Servistrip AH 205 can be cast into insitu concrete or usedbetween new and existing concrete sections to provide a highly effective watertight seal. Therate of swelling is controlled to allow installation and exposure to rain. The swelling pressuredoes not cause spalling or damage to freshly poured concrete before it has time to reach itsdesign strength. The simple, solid form also allows it to be used in difficult locations such asdiaphragm and secant piled walls. Also concrete surfaces where other sealing methods wouldbe impractical.

Servistrip AH205Type Section LengthServistrip AH205 20mm x 5mm 10m

A range of prefabricated junctions and intersections is available, also see generic profiles and accessories on page 31.

27



Dual Stop Bentonite Waterstop

Dual Stop Bentonite Waterstop Dual Stop Waterstop is a Bentonite based waterstop which reacts in contact with water byswelling to form a watertight seal in concrete structures. It has been independently tested upto 30 metre head of water. It has full WRAS approval for use with potable water. Dual StopWaterstop has been specifically designed to seal construction joints against the ingress oroutgress of liquids in water retaining or excluding structures. It is fixed by nailing to the faceof the existing pour prior to placing the next pour. It is installed directly onto scabbledsurfaces and will swell into voids up to 12mm deep. Changes of direction and end joints aresimply achieved by butting together, no welding or adhesives are required.

Dual Stop Bentonite Waterstop Type Size Roll sizeDual Stop Waterstop 7mm x 25mm 8m

Dualtite Hydrophilic Expansion Joint Waterstop Dualtite Waterstop consists of a PVC profile manufactured from weldable waterstop gradematerial incorporating Dual Seal Hydrophilic Bentonite Waterstops, which swell in contact withwater, to form a totally watertight seal. The lug on either side of the central section, ensuresthat Dualtite is fully embedded into the adjacent concrete surface, and its unique central coredesign allows the joint to open up to 50%. When Dual Seal Bentonite Waterstop is installed inKicker or Construction Joints, it is simply butt joined to the integral Dual Seal Waterstop, in theDualtite, to create a totally watertight system.

Dualtite Hydrophilic Expansion Joint Waterstop Type Roll LengthDualtite Hydrophilic Expansion Joint Waterstop 8m

Dualtite Hydrophilic Expansion Joint Waterstop

Waterstop

WaterstopWaterstop is a sodium bentonite based material, designed to stop water infiltration throughinsitu concrete construction joints. Sodium bentonite swells when in contact with water,forming an impermeable barrier. This swelling property allows the Waterstop to form apermanent pressure seal within the concrete joint, thus eliminating water migration over oralong the waterstop. The key to the products effectiveness is its 75% sodium bentonitecontent, which provides superior expansion, to seal and fill voids and cracks within theconcrete. Waterstop is an active bentonite based waterstop, that is designed to replace passivePVC / Rubber type waterbars, thereby eliminating the requirement of special pieces and seamwelding. Waterstop is manufactured in light - weight, flexible coils that are easily installed inhot or cold weather conditions, by a single worker.

WaterstopType SizesRIW Waterstop 25m x 19mm, supplied in 5m long coils. RIW Mesh A box of 50 600mm lengths including fixing nails

30 linear metres per box

28

Wat

erpr

oofin

g



ExtasealType WidthConstruction Joint 200mm 250mm -Expansion Joint 200mm 250mm 320mmKicker Joint - 250mm 320mmRoll Size 15m 10m 10m

PilecapType - Pilecap Width Roll SizeConstruction Joint 125mm x 125mm 25mExpansion Joint 125mm x 125mm 25mA range of prefabricated junctions & intersections areavailable, also see generic profiles & accessories on page 31.

Swelltite Hydrophilic Self Swelling Waterstop SCP Swelltite Hydrophilic Waterstop is manufactured from a neoprene polymer basedhydrophilic compound and high water absorbent resins. Swelltite has been specificallydesigned for use in sealing construction joints between pre-cast concrete units, steel and in-situ concrete. Unlike traditional waterstops Swelltite is centrally placed and bonded flat in thejoint prior to making the second pour, activated by water Swelltite will swell up to 5 times it’svolume and seal the passage of water by exerting pressure across the joint. Swelltite rolls areself adhesive. Porour Surfaces should be sealed with Primer P.

Swelltite Hydrophilic Self Swelling Waterstop Type Size Roll SizeSwelltite Hydrophilic 20mm x 5mm 15mPrimer P 1 litre cans

Swelltite Hydrophilic Self Swelling Waterstop

PVC Waterstops ProfilesSCP PVC Waterstops are available in various profiles for different concrete joint situations. FlatDumbell and Centrebulb types are used for internal waterstop details and have beenindependently tested to prevent the ingress of water, up to 27m head in construction andexpansion joints in water retaining and excluding structures.Extaseal external PVC Waterstop is a high performance heavy duty profile specificallydeveloped to seal joints in concrete structures at the outside surface.Pilecap waterstop has been specifically developed to provide a watertight seal between thepilecap and floor slab in concrete structures.

Dumbell and CentrebulbType Width x 5mm web (Eyeletted) Width x 10mm web (Heavy Duty)Flat Dumbell Construction Joint 150, 200, 260mm 150, 250mmCentrebulb Expansion Joint 150, 200, 260mm 150, 250, 305mmRoll Size 15m 10m

PVC Waterstops Profiles

Bentorub + Bentorub is a green flexible hydrophilic strip made of natural bentonite clay and syntheticrubber. It is designed for the sealing of concrete joints, cold joints and working joints inconcrete, around pipe penetrations, in sewer joints, against slurry walls and sheet piling.

Bentorub Salt A Red flexible hydrophilic strip made of natural bentonite clay and synthetic rubber. It is has the same applications as Bentorub+ except Bentorub Salt may only be used in contact with salt and Brackish water.

Bentorub + | Salt

Hydophilic WaterstopType Size Roll SizeBentorub+ 20mm x 25mm 5mBentorub Salt 20mm x 25mm 5m

29



Superstop Self Swelling Waterstop

Superstop Self Swelling Waterstop SCP Superstop has been developed to provide a watertight seal in construction joints, and isparticularly effective when used in ‘box out’ applications. When water comes into contact withSuperstop the bentonite expands to form a pressure seal which has been successfully testedto withstand a 33 metre head of water without leakage.

Superstop Self Swelling Waterstop Type Sizes Roll LengthSuperstop 25mm x 12mm 6m

25mm x 19mm 3.9m

Uraswell Hydrophilic Sealant Waterstop SCP Uraswell is a polyurethane based sealant which swells in contact with water and forms apermanent waterproof seal. Uraswell is solvent free and non-toxic and is easily applied with abarrel gun, it provides excellent adhesion on many materials including uPVC.

Uraswell Hydrophilic Sealant Waterstop Type SizeUraswell Hydrophilic Sealant 600ml sausagesBarrel Gun 600ml

Uraswell Hydrophilic Sealant Waterstop

Sika 2 | 3 | 4 | 4A

Sika 2, 3, 4 & 4ASika 2, 3, 4 & 4A are all purpose waterproofing liquids with various setting times and/orwaterproofing properties. Setting time dependent on concentration.

SIKA 2Sika-Plug, is Sika’s fastest setting point leak plugging product when usedneat, for point leak plugging where high water ingress is present.

SIKA 3All purpose setting and hardening accelerator also repairing cracks andjoints (contains calcium chloride). A mortar accelerator for sealing joints inbrickwork, blockwork, masonry and rock fissures.

SIKA 4Accelerator, waterproofer, also for oil resistant renders and underwater concreting. For pointand surface waterproofing against seepage, particularly sea water and sewage.

SIKA 4aQuick setting waterproofer for renders and leak sealing, setting in about 45 seconds. For pointand surface waterproofing against general seepage (should be covered with Sika 1 render).

Sika Waterproofing LiquidsType Set time Consumption per kg cement Pack SizeSika 2 10 to 20 seconds 0.7 litres 5 litresSika 3 20+ seconds 0.23–0.7 litres 5 litresSika 4 25+ seconds 0.15-0.7 litres 5 litresSika 4A 45 seconds 0.18-0.35 litres 5, 25 litresNote - all consumption rates vary on set time and required use.

30

Wat

erpr

oofin

g



SikaSwellThree joint sealing profiles that swell in contact with water. They are permanently waterresistant, highly elastic and pretreated to prevent premature swelling on site.

SikaSwellType Width Thickness Box 2003 20mm 3mm 140m2010H 20mm 10mm 50m2507H 25mm 7mm 50m

SikaSwell 2003 | 2010H | 2507H

Sika InjectoflexSika Injectoflex System (type HP) is an expanding, reinjectable hose for producing waterproofconstruction joints.

Uses: Components:Providing watertight joints for: Inner tube of non expanding black neoprene.Grade 2, 3 and 4 basements. 3 red external hydrophilic swelling strips.Underground car parks. 3 yellow compressible sealing cords of foam rubber.Water retaining structures.

Sika InjectoflexType SizeInjectoflex 40m

Sika Injectoflex

Hydrotite

HydrotiteHydrotite is the original expanding rubber used in a variety of applications for sealing jointsagainst water penetration. Initially developed for sealing segmental concrete tunnel linings,Hydrotite is a compound of polychloroprene (Neoprene) and hydrophilic resin, which expandswhen in contact with water, providing a self-sealing and easy touse alternative to traditional methods. Ideal for water retainingstructures to achieve watertight insitu concrete joints.

HydrotiteType Size CJ-0725 10m coilContact Adhesive 1 litre

Plug

PlugA cementitious ready-mixed and rapid setting compound to plug leaksand stop water. DWI approved for use in contact with drinking water.

PlugType SizeVandex Plug 15kg plastic, resealable bucket



PVC Internal and External ProfilesPVC Waterstop profiles are designed for the use in basement, foundation and floor slabconstruction in both horizontal and vertical joints.

External ExpansionIncorporates a flat top centre box.

External ConstructionPlain web section for use in contraction and construction joints.

CentrebulbFor use in expansion or contraction joints.Reinforced eyeleted outer flanges.

DumbellPlain web sections for use in construction and contraction joints, also incorporating eyeleted outer flanges.

H.D. Centrebulb Range10mm thick plain web sections for use in construction and contraction joints, also incorporating eyeleted outer flanges.

Jointing PiecesA full range of junction pieces are available.

Tools

Jig and Knife

TypeJointing Jig110V Hot KnifeGas Heated Hot Knife

PVC Internal and External Profiles

32

Wat

erpr

oofin



32

Wat

erpr

oofin

gThis section covers products that areeither coatings or in surface sealerswhich act as barriers to water ingress.

Products Page

Thoroseal 33

Flexcrete 851 33

Fosroc Integra 34

SikaTop 34Sika Slurry 34

BB 75 35Super 35

Cementitous Waterproofing

33


Cementitious Waterproofing

Thoroseal

ThorosealTHOROSEAL®, when mixed with water or a THORO ACRYL 60/ water blend (1 part THOROACRYL 60 to 3 parts water) to a lump free consistency, provides a waterproof coating that iseasily applied by brush or spray to concrete and masonry above and below ground level.

ThorosealType Size CoverageThoroseal 25kg 1st coat: 1.5kg/m2

2nd coat: 1.0kg/m2

Thoroseal SuperWhen mixed with clean water Thoroseal Super forms an extremely durable waterproof coatingfor concrete and masonry. Applied with a brush or spray. Available in white and grey and inbags or pails. Resists both psitive and negative pressure.

Thoroseal SuperType Size CoverageThoroseal Super 25kg 2.5-3.5kg/m2 for two coats

Thoroseal Super

Ancillaries

Thoro Acryl 60 Thoro Acryl 60 is an acrylic polymer liquid additive for cement mixes, designed to enhancetheir physical characteristics, ease application and increase wear and weather resistance.

Thoro Acryl 60 Size5, 25 litres

Cementitious Coating 851Cementitious Coating 851 is a two component cementitiousmodified polymer coating which cures to form a hard, highlyalkaline film with a degree of elasticity. It totally waterproofsconcrete, stone, brickwork and blockwork even whensubjected to negative and positive hydrostatic pressure testedat 10 bar. The standard 2mm thickness gives equivalentwaterproofing to 1m of good quality concrete. This versatilecoating has a range of applications including use in clean(DWI Aproved) and dirty water, basement waterproofing,tunnels and underground structures. It is widely specified forchloride protection and has an excellent international trackrecord.

Cementitious Coating 851Type Size Yield CoverageCementitious Coating 851 35kg pack 19.5 litres 9.7m2/35kg at 2mm thickness

Cementitious Coating 851

34

Wat

erpr

oofin

g



Fosroc Integra Integra is an economic cementitious coating system for waterproofing concrete againstpositive and negative hydrostatic heads of water. Its uses include: sewage treatment and water treatment tanks, pipes, tunnels, manholes and below grade basements includingretaining walls.

Fosroc Integra Type Size CoverageIntegra 25kg By brush: 1-1.5 kg/m2, By trowel: 2-2.5 kg/m2

Fosroc Integra

SikaTop Seal 107

SikaTop Seal 107SikaTop Seal 107 is a two component polymer modified cementitious waterproof mortarcomprising of a liquid polymer and a special cement based mix incorporating admixtures.

SikaTop Seal 107Type Size Colour Average CoverageSikaTop Seal 107 10, 25kg Cement 2.0kg/m2/mm

SikaTop 121SikaTop 121 is a two-component thin layer waterproofing, leveling and bonding mortar.

SikaTop 121Type Size Average CoverageSikaTop 121 10, 25kg 2kg/m2/mm

SikaTop 121

Sika Damp Proofing SlurrySika Damp Proofing Slurry is a one component flexible polymer modified cementitious damp-proof product comprising of special cement based components and admixtures. When usedwith water a slurry or mortar material is produced for direct application to a variety ofconstruction substrates.

Sika Damp Proofing SlurryType Size Average CoverageSika Damp Proofing Slurry 25kg 6.5-7.5m2/bag @ 2mm thick

Sika Damp Proofing Slurry

35



BB 75

BB 75Vandex BB 75 is a cementitious, ready for use (just add water),efflorescence-free surface waterproofer with hydrophobic properties,resistant to water and moisture.

BBA approved (certificate no. 90/2516) and approved for use incontact with drinking water.

BB 75Type Size CoverageBB 75 25kg PE-lined paper bag 6kg/m2/3mm

BB 75 EVandex BB 75 E is a cementitious two-component polymer-modified and efflorescence-free surface waterproofer withhydrophobic properties, resistant to water and moisture. Made ofVandex BB 75 as a dry component and Vandex Elasticizer PK 75as a liquid component, which provides elasticity and crackbridging properties.

BB 75 EType Size CoverageBB 75 (dry component) 25kg PE-lined paper bag 6kg/m2/3mmVandex Elasticizer PK 75 10kg PE-container

BB 75 E

SuperVandex Super is a capillary-active cement based waterproofing slurryspecifically designed for concrete waterproofing applications. It is basedon grey Portland cement and is applied to concrete to provide in-depthwaterproofing protection.

BBA approved (certificate no. 04/4188) and approved for use in contactwith drinking water.

Super/Super WhiteType Size CoverageVandex Super 25kg PE-lined paper bag 1.5kg/m2

Super/Super White

Wat

erpr

oofin

g


Wat

erpr

oofin

gProducts in this section are added tomixes to improve their ability to resistwater. Some products also improveworkability and strength.

Products Page

Nitobond SBR 37

Support Site SBR 37

Sika 1 37Sikacem 810 37

Ronafix 38AdmixturesMix Designs 38

Waterproofing Admixtures

37



Wat

erpr

oofin

g

Nitobond SBR

Nitobond SBRAdditive for improving mortars for waterproofing repairs. Also used as abonding agent for slip bricks, ceramic tiles etc.

NitobondType Size CoverageNitobond SBR 5, 25 litre As Slurry Primer = 2 to 3m2/litre

For other uses SBR coverage is dependant on mix design.

Sika 1

SikaCem 810

Sika 1Sika 1 mortars are prebatched kiln dried blends of specially graded aggregates and cementspackaged in 4 grades at the appropriate mix ratios for optimum application performance anddurability.When mixed with the diluted Sika 1 liquid waterproofing admixture they provide the multicoatcomponents for the structural waterproofing and waterproof render systems.

Sika 1Type Size Cement/Aggregate RatioSika 1 Waterproofer 5.25 litres n/aSpritz & bonding coat mortar 25kg bag 1:1.0Render mortar 25kg bag 1:1.5Screed mortar 25kg bag 1:2.5Finishing mortar 25kg bag 1:3.5

SikaCem 810SikaCem 810 is a patented one component water based acrylate bonding agent and integral mortaradmixture. When diluted it produces a gauging solution for improving cementitious mixes. It shouldbe added to water then mixed with cement and sand/aggregate to produce:Bond coat/slurry, Pourable micro concrete, Renders, Screeds with enhanced mechanical properties.

SikaCem 810Type SizeSikaCem 25 litres

Support Site SBR

Support Site SBRSupport Site SBR is a high performance but economic water resistant bonding agent for externalrendering and screeds. It can be used as an admixture for concrete repair, brick slip and tilefixing mortars as well as an improving agent for resistance to abrasive chemicals and oils.

Support Site SBRType SizeSupport Site SBR 5, 25 litres

38

Wat

erpr

oofin

g



Ronafix Mix Design

Wat

erpr

oofin

g

Application Mix Thickness/notesFloor screeds and screed repairs A 6mm – 50mmFloor screeds and screed repairs A1 26mm+Floor toppings and topping repairs B 15mm – 25mmFloor toppings and topping repairs B1 26mm+Floating floor screeds F 35mm+Concrete repair D over reinforcing steelConcrete repair A no reinforcing steelRenders E watertight and tankingRenders A waterproofBedding brick slips, copings C 6mm – 12mm typicalFine concretes G 25mm+ typicalSlurry coats SC 1mm – 3mm typical

Mix Designs Cement Medium 6-3mm 10-5mm 10-5mm Ronafix Water Yield m3 Coverage sharp granite pea granite (approx) (approx) (approx)sand chips shingle chips

A By weight 50kg 125kg - - - 9 litres 9 litres 0.1 10m2 @10mmBy volume 1 2 - - - 1:1 with water - - -

A1 By weight 50kg 150kg - - - 4.5 litres 14 litres 0.1 10m2 @10mmBy volume 1 2.5 - - - 1:3 with water - - -

B By weight 50kg 75kg 75kg - - 9 litres 9 litres 0.1 10m2 @10mmBy volume 1 1.25 1.25 - - 1:1 with water - - -

B1 By weight 50kg 75kg - - 75kg 4.5 litres 14 litres 0.1 7m2 @15mmBy volume 1 1.25 - - 1.25 1:3 with water - - -

C, D By weight 50kg 125kg - - - 14 litres 4 litres 0.1 10m2 @10mm& E

By volume 1 2 - - - 3:1 with water - - -F By weight 50kg 150kg - - - 4.5 litres 13.5 litres 0.1 10m2 @10mm

By volume 1 2.5 - - - 1:3 with water - - -G By weight 50kg 100kg - 100kg - 4.5 litres 14 litres 0.14 5.6m2 @25mm

By volume 1 1.5 - 1.5 - 1:3 with water - - -Slurry By weight 50kg 50kg - - - 35 litres - 0.1 105-122m2

CoatBy volume 1 1 - - - - - - -

Ronafix

RonafixRonafix is a high performance site batched, Agrément Board certified, water based SBRpolymer for producing waterproof renders. The cured mortar bonds monolithically to concreteand other surfaces and will resist both positive and negative pressure. Ronafix is used inswimming pools, tanks and basements to contain or exclude water.

RonafixType Size Ronafix 5, 25, 230 litres

Bri

ckw

ork

Pro

duct

s

2Damp Proof Courses 40Cavity Closers 48Wall Ties 52Reinforcement 61Accessories 63

Bri

ckw

ork

Pro

duct

s


Bri

ckw

ork

Pro

duct

sFrom the leading manufacturers of wallties and fixings, to damp proof courses,masonry support and ventilation. Wesupply a full range of brickworkproducts together with complimentaryancillaries, fixings and accessories.

Products Page

Ruberoid DPC 40Pre Formed Cloaks 41Marley Waterproofing DPC 43Visqueen DPC 44Eurocourse DPC 45Insulated DPC 46DPC Accessories 46Cavity Closers 48Ancon Wall Ties 52Ancon Wall Starters 54Ancon Windposts 57Helibar Crack Stitching 58Vista Wall Ties 59Masonry reinforcement 61Joint Reinforcement 62Lintels 63Soffit Vent Mesh 63Ventilation 64Leaded cavity trays 65Compribrand 67Brickwork Joint Fillers 67Brick Clean & Sealer 68Insulation 68

Brickwork Products

Hyload Original Hyload Original is the UK’s leading high performance DPC and cavity tray system, havingestablished its trusted position over 40 years of continuous use. A high performance polymericDPC, Hyload Original is suitable for providing damp proofing and cavity trays in allapplications, including brick, block, stonework and concrete in both solid and cavitywall construction. Use where DPC colour is not critical. Hyload Original is resistantto compression even under the heaviest of wall loading and will not extrude whenunder load.• BBA Certification • Over 40 years proven reliability • Excellent performance under high compressive loads • Good flexibility at low temperatures • Market leading mortar adhesion• Tough and durable

Brickwork Products40

Bri

ckw

ork

Pro

duct

s


Hyload Original Widths Thickness Length100, 112.5, 125, 150, 225, 300, 337.5, 1.27mm 20m360, 450, 600, 900 & 1000mm

Hyload Housebuilder Hyload HouseBuilder is a domestic grade polymeric DPC specially formulated for the housingcontractor and is suitable for use up to and including 3 storeys. Ideal for damp proofing wallsin brick, block, stonework or concrete in both solid or cavity wall constructions (butnot unsupported across the cavity).Hyload HouseBuilder uses the same proven production technology as used onRuberoid's Hyload Original DPC. • Specifically designed for housing • No extrusion under heavy loads • Usable under concrete floor beams • Offers vastly superior performance to traditional British Standard DPCs • BBA Certification

Hyload Housebuilder Widths Thickness Length100, 112.5, 125, 150, 225, 300, 337.5, 0.9mm 20m360 & 450mm

B U I L D I N G P R O D U C T SHyload Original Housebuilder | MortarMatch | Permabit

Hyload MortarMatch Hyload MortarMatch reflects the most recent advances in polymeric materials. The result is aneven tougher, more durable material in a natural mortar colour. Hyload MortarMatch greatlyreduces the visual impact of the black line created where traditional DPCs protrude from themortar but still offers all the benefits you would expect from a Hyload High Performance DPC.• Mortar colour-matched: Standard Brown and White • Substantially greater tensile strength and elongation • Improved tear strength • Improved puncture resistance • Improved flexibility • BBA Certification• Specific colours available on orders over 600m2

Hyload MortarMatchWidths Thickness Length100, 112.5, 125, 150, 225, 300, 337.5, 1.17mm 20m360, 450, 600, 900 & 1000mm

Brickwork Products 41


PermabitPermabit has been the choice of many brickwork contractors offering excellent performance inthe areas of tensile, elongation and tear strength. Permabit provides horizontal, vertical orstepped DPCs including cavity trays in either solid or cavity walls of brick, block, stone orconcrete. It is a mixture of bitumen, synthetic polymers, synthetic fibres and other additives.• Excellent mortar adhesion properties • Over 20 years proven reliability • Excellent performance under high compressive loads • Tough and durable with excellent flexibility • BBA Certification

PermabitWidths Weight Thickness Length100, 112.5, 125, 150, 225, 300, 337.5, 1.6kg/m2 1.25mm 20m360, 450, 600, 900 & 1000mm

B U I L D I N G P R O D U C T SPermabit

Hyload Insulated DPCInsulated DPC is essential in providing damp proofing and meeting building regulations.Hyload Ruberclose has been developed to minimise cold bridging when closing masonry cavitywalls around openings. It is designed to be installed as work proceeds and is resilient enoughto accommodate irregularities in cavity closers and normal site handling. Standard sizessuitable for both 100mm and 140mm blockwork.

Hyload Ruberclose - bitumen polymer laminated to cross-linked polyethylene foam insulation;

• BBA Certification • Flexible DPC superior to polyethylene • Insulation material more robust than polystyrene • Insulation inherently flexible and will not crack

when bent • Exceptionally easy to handle • Special sizes available

Hyload Ruberclose Insulated DPCWidths Length165, 225mm 8m

B U IL D IN G P R O D U C T SHyload Insulated DPC Ruberclose

For Hyload DPC Accessories, go to page 46.

Hyload Gastite DPCHyload Gastite DPC is a methane and radon resistant membrane that allows you to meetgovernment guidelines for gas protection. With more and more brownfield sites beingdeveloped, a DPC that is effective against the disruptive effect of gases through masonry is anessential component of your system.Hyload Gastite DPC is a rubber modified bitumen membrane with a polyester reinforcementand an aluminium foil core. It is sand finished on both surfaces.

Hyload Gastite DPC should be used together with self adhesive Gastite DPM or loose laidGastite LL for total security.

Hyload Gastite DPCWidths Length100 to 900mm 8m

B U IL D IN G P R O D U C T SHyload Gastite DPC


Bri

ckw

ork

Pro

duct

s


Hyload Preformed CloaksA range of standard preformed DPC Cloak units to simplify the damp-proofing of awkwardjunctions and eliminate leakage paths.

Certain brick and block work details are impossible to damp-proof efficiently and HyloadPreformed Cloak Units are available to overcome complex shapes and changes in direction,saving potential problems and costly remedial works on site. Importantly Hyload PreformedCloaks speeds up DPC installation and help to reduce costs.

Hyload Preformed Cloaks enable the designer and installer to comply with BS 5628:Part3: 2001.

Type 1 Change of level unit (brick/block) reversible Type 2 Change of level unit (surfacefixed) Type 3 Stop End (Brick/block or surface fixed) Type 5 Internal Corner (surface fixed) Type 6 External Corner(surface fixed) Type 7 Internal / External Corner (brick/block) Type 8 Internal Corner (reversible) Type 8S Angled Stop EndType 9 External Corner Type 10 Column Stop End (brick/block or surface fixed) Pipes 5", 7" and 8" pipes.

B U I L D I N G P R O D U C T SHyload Preformed Cloaks

Type 1

Type 5Type 8

Type 8S

Type 9

Type 10

Type 6

Type 7

Type 7

Type 2

Type 3

Type 3



Damp Proof Courses Aquagard | Homegard | Bitugard

Aquagard Aquagard is a high performance pitch polymer damp-proof course system, suitable for inclusionin brick, block, stone-work or concrete walls of solid and cavity construction, it can be used inhorizontal, vertical stepped and cavity tray situations, as well as in beam and block flooring.

The system incorporates a 1.25mm pitch polymer dpc, 1.9mm pre-formed pitch polymercloaks, solvent weld and contact adhesives. When used alone or in conjunction with Dampsealself adhesive dpm, a continuous barrier against water and water vapour can be formed.

Damp Proof CoursesType SizesAquagard 100, 112.5, 150, 225, 337, 450 & 600mm x 20mHomegard 100, 112.5, 150, 225, 337.5, 450 & 600mm x 20mBitugard 100, 112.5, 150, 225, 337.5, 450 & 600mm x 20m

AccessoriesDPC Accessories SizesNo. 35 Adhesive 0.5 litreNo. 39 Adhesive 5 litresCavity Tray Fixing Pin x250 unitsCloaks Made to order

HomegardHomegard is a high performance housing grade pitch polymer damp-proof course systemspecifically formulated for use in housing and is suitable for all housing constructions madefrom brick, block, timber, stone or concrete.

The system includes a 0.9mm pitch polymer dpc, 1.9mm pre-formed pitch polymer cloaks andsolvent weld adhesive. When used alone or in conjunction with Marleyseal self adhesive dpm,a continuous barrier against water and water vapour can be formed.

Aquagard and Homegard have been independently tested by the British Board of Agrément,certificate no. 00/3704.

BitugardBitugard is a hessian reinforced damp-proof course suitable for inclusion in brick, block,stonework and concrete walls of both solid and cavity construction.

It can be used in horizontal and cavity tray situations. Bitugard iscomposed of a tough, high quality hessian, coated with oxidisedbitumen and surfaced on both sides with a sand finish.

AccessoriesNo 35 AdhesiveA solvent weld adhesive used to form a watertight seal. For use at laps and junctions withAquagard, Homegard and pre-formed cloaks where there is a downward passage of water.

No 39 AdhesiveA rubber adhesive solution to secure Aquagard, Homegard and pre-formed cloaks to surfacessuch as concrete, steel and brick work. It should be used in conjunction with mechanicalfixing.

Cavity Tray Fixing PinA two part nylon plug and screw to be used in conjunction with No 39 adhesive tomechanically bond Aguagard to block work, brick work or concrete.


Bri

ckw

ork

Pro

duct

s


Zedex Housing Grade DPC

Zedex CPT

Zedex CPTZedex CPT High Performance DPC is a new generation of damp proof course. Made from Co-Polymer Thermoplastic (CPT), it possesses the characteristics necessary for it to performeffectively under harsh conditions.Zedex CPT High Performance DPC provides superior strength, adhesion and waterimpermeability properties. Improved toughness helps to avoid damage during installation andis compatible with other Visqueen products.

Ancillary Product

Zedex CPT Jointing SystemZedex CPT High Performance DPC Jointing Tape is a double-sided butyl based jointing tape.The use of a single release paper assists ease of application on site. Zedex CPT HighPerformance DPC Jointing Tape is suitable for use in the lapping and sealing of Zedex CPTHigh Performance DPC as well as in the surface fixing applications. All joins in lengths of DPCmust be a minimum of 100mm lapped and bonded using Zedex DPC Jointing Tape.

Zedex CPTWidth Length Thickness Weight100mm–1,400mm 20m 0.8mm 0.75kg/m2

Zedex Housing Grade DPCZedex Housing Grade DPC is the based on the same polymer technology as Zedex CPT HighPerformance DPC, the new generation material designed to give higher levels of security andintegrity.

Zedex Housing Grade DPCWidth Length Thickness Weight100mm–1,400mm 20m 0.6mm 0.6kg/m2

Zedex CPT Jointing SystemWidth Length100mm 15m



Polythene DPC

Polythene DPCVisqueen Polyethylene DPC is designed to prevent the passage of moisture in brick and blockwork from external sources. Visqueen Polyethylene DPC is manufactured from high qualityreprocessed materials to provide a cost effective and durable domestic grade DPC.

The Visqueen Polyethylene DPC is suitable for use in vertical and horizontal applicationsthroughout domestic constructions. Visqueen Polyethylene DPC is produced to stringentperformance standards and includes a pronounced emboss to improve mortar adhesion.

Accessories

Visqueen Zedex DPC Jointing TapeVisqueen Polyethylene DPC Jointing Tape is a double-sided butyl based jointing tape. The useof a single release paper assists ease of application on site. Visqueen Polyethylene DPCJointing Tape is suitable for use in the lapping and sealing of Visqueen Polyethylene DPC aswell as in the surface fixing applications. All joins in lengths of DPC must be a minimum of100mm lapped and bonded using Visqueen Polyethylene DPC Jointing Tape.

Polythene DPCWidth Length100, 112.5, 125, 150, 225, 300, 450, 600, 900mm 30m

Gas Resistant GRVisqueen Gas Resistant (GR) Damp Proof Course is a flexible polyethylene DPC with analuminium foil designed to prevent the transmission of carbon dioxide, radon and methanegases. This is in addition to the products usage as a damp proof course. Resistance to carbondioxide, radon and methane is achieved by an integral aluminium film.

Gas Resistant (GR)Width Length Thickness WeightUp to 1,000mm 30m 0.5mm 0.5kg/m2

DPC Jointing TapeWidth Length100mm 15m

Gas Resistant GR

Eurocourse DPC HP | XL | Colourmatch

Eurocourse High Performance DPC SystemsEurocourse High Performance polymeric DPC System includes preformed cloaks, Eurocourseadhesive and mastic, jointing tape, fixing strip, fixing pins, joint supports and insulated DPC.With almost twice the strength of Pitch Polymer DPC’s and with the ability to be stretched byover 500%, Eurocourse high performance DPC’s are able to accommodate building settlementand cracking in walls yet maintain damp proofing integrity.

Eurocourse DPCType Widths Lengths Weight ThicknessEurocourse HP Polymeric DPC 100, 150, 225, 300, 450, 600, 900mm 20m 1.18kg/m2 1.2mmEurocourse XL Polymeric DPC 100, 150, 225, 300, 450, 600, 900mm 20m 0.87kg/m2 0.9mmEurocourse Colourmatch DPC 100, 150, 225, 300, 450, 600, 900mm 20m 1.18kg/m2 1.2mmFull range of accessories, including jointing tape, fixing strip, mastic, joint support and pre-formed cloaks available, contact us for details.


Bri

ckw

ork

Pro

duct

s


Insulated DPC Damcor | Stonecor

DamcorDamcor is designed to prevent the problem of cold bridging aroundwindow and door openings in traditional cavity constructions. At thesepoints in the structure, condensation, with possible consequentialstaining and mould growth, can occur at the reveals due to the lack ofinsulation where the cavity is closed.

DamcorWidth Roll Length Rolls/Pack165mm 6m 8225mm 6m 6

StonecorStonecor is a non-Combustible Insulation made from Super FlexibleLava Stone Wool Isulation bonded to DPC which achieves a minimum of30 minutes fire integrity.Stonecor meets todays thermal and acoustic insulation requirements forconstruction.

StonecorWidth Roll Length Rolls/Pack165mm 10m 8225mm 10m 6

Stonecor can be supplied in any width up to 800mm

B U I L D I N G P R O D U C T SDamp Proof Accessories Hyload

Hyload Damp Proof Accessories

Hyload DPC Joint Support SystemThe Hyload DPC Joint Support System offerscontractors all the components needed in jointingcavity trays, making effective and waterproof jointsbetween DPCs, cavity trays and preformed units.The Joint Support System works by providing rigidsupport across the cavity allowing pressure to beapplied to effect a waterproof joint.

• DPC joint fully supported • System enables designer and installer to comply

with current best practice • Provides a clean and watertight joint • Improves installation procedures helping to reduce overall costs

The Hyload DPC Joint Support System pack consists of a; • 350 x 200mm reinforced support of twin walled polypropylene • 100mm self adhesive strip protected by silicone release paper bonded centrally to its upper

surface • 100mm wide self adhesive tape which is protected on both sides by silicone release paper

continued overleaf



Hyload DPC Lap AdhesiveIdeal for bonding laps of DPC to DPC and DPC topreformed cloak units. Hyload DPC Lap adhesive is asynthetic rubber/resin contact adhesive and should beapplied to both lap faces.

Hyload Fixing Strip & pinsType Size Length/packFixing Strip 3mm x 25mm x 2m 40m Fixing pins 300 no.

Hyload DPC Lap AdhesiveSize Coverage500ml can 3m2/1.5m2 bonded area

Hyload DPC MasticHyload DPC Mastic is suitable for bonding Ruberoid high performanceDPCs and preformed cloak units to a wide range of building materialsincluding steel, concrete and blockwork. It is a thick synthetic rubbermastic adhesive with gap filling properties up to 6mm. It is commonlyused for adhering DPC cavity trays to the cavity face of the inner leafprior to the use of Hyload DPC Fixing Strip and Pins.

Hyload DPC MasticSize400ml cartridge2.5 litre tin

B U I L D I N G P R O D U C T S Damp Proof Accessories Hyload

Contact AdhesiveHigh quality adhesive for bonding filler boards, polystyrene,insulation and protection boards to a wide range of surfaces.

Hyload Mastic TapeNon hardening, double-sided, permanently flexible, high performance synthetic rubber sealant with adhesive properties.

Hyload Mastic TapeSize Length1mm x 15mm 45m1mm x 25mm 45m1.5mm x 30mm 30m2mm x 50mm 22.5m2mm x 75mm 22.5m

Hyload DPC Jointing TapeA double-sided, bitumen tape for fixing membrane protectionboards to the membrane, sealing overlaps between polythenesheets and for joining the end laps of membrane.

Hyload DPC Jointing TapeWidth Length100mm 10m

Contact AdhesiveSize5 litre can

Hyload DPC Fixing Strip and Fixing PinsThe fixing strip can be used for surface fixingDPC cavity trays to the cavity face of the innerleaf e.g. blockwork or concrete.Semi rigid plastic strips are pre-drilled and areused to easily attach the DPC to the inner leafof a cavity wall construction. The strip issecured using the fixing pins supplied.

Polythene DPC

Polythene DPCLow cost entry level DPC

Polythene DPCWidth Roll Length Area 100mm 30m 3.00m2/Roll112.5mm 30m 3.375m2/Roll150mm 30m 4.50m2/Roll225mm 30m 6.75m2/Roll300mm 30m 9.00m2/Roll450mm 30m 13.50m2/Roll600mm 30m 18.00m2/Roll900mm 30m 27.00m2/Roll


Bri

ckw

ork

Pro

duct

s


Cavi60 WCAThe Cavi60 prefix identifies this cavicloser as having 60 minutes fireintegrity rating. The Cavi60 Type WCA (Wide Cavity Applications) isa robust closer specifically designed to close wider cavities;

• 60 minutes fire integrity rated stops• Acts as a DPC• Accompanying stainless steel anchoring ties• For cavity widths 100mm up to 150mm• Micro Fins

Sizes70mm x cavity width required within range.Suitable for cavities of 100mm up to 150mm, (state requirement).Available in lengths of 2.1m and 3.0m.Lengths of 3.6 metres available to special order.

Cavi90The Cavi90 prefix identifies this Type H cavicloser as having 90minutes fire integrity rating;

• 90 minutes fire integrity rating• Closes and insulates reveals• Suitable in cavities of 50mm and 75mm wide• Acts as a DPC• Integral Fins

Sizes50mm x 75mm. Face closer 125mm overall.Suitable for cavities of 50mm or 75mm. Attach faceplate toalternative side to change cavity width option. Available in lengths of 2.1m and 3.0m.

Cavi240 Type PWIBThe Type PWIB Integrity Barrier is designed to damp-proof, insulate and provide a fire integritybarrier at party wall intersection;

• Fire-rated integrity barrier• Acts as a DPC• Reduces acoustic flanking transmission• Preformed ready to use, will not sag or distort

SizesStandard 2400mm lengths have an overall width ofapproximately 300mm and a variable insulation widthdependant on the cavity width being serviced and extent (if any) of masonry projection into cavity. (State cavity width remaining when ordering).This product can also be manufactured to other dimensions by special order.

Cavity Closers Cavi60 WCA | Cavi90 | Cavi240 PWIB



Cavity Closers

Thermabate Insulated Cavity Closer A simple and efficient method of closing cavities around openings in masonry walls. Theinsulating foam core prevents thermal bridging, while the PVC-U box section forms a positivedamp proof barrier and key for the direct application of plaster. It effectively preventscondensation, pattern staining and mould growth frequently associated with traditionalmethods of closing cavities.

Thermabate obviates the need for cut bricks or blocks to close cavities and avoids problemsencountered when supporting traditional dpc's and insulation boards during construction.Thermabate is a PVC-U extrusion with a CFC/HCFC-free insulating core, available in six sizes,colour coded for instant identification. Jointing clips extend the range further by allowing theThermabate sections to be joined. Thermabate ensures a more positive detail around openingsand offers a time saving profile when built in. It is suitable for use with timber, metal or plasticwindow frames and can also be supplied to order in curved sections.

SizesThermabate 50 (brown) for cavities 50 - 60mm wideThermabate 65 (black) for cavities 65 - 74mm wideThermabate 75 (white) for cavities 75 - 84mm wideThermabate 85 (yellow) for cavities 85 - 94mm wideThermabate 90 (orange) for cavities 90 - 99mm wideThermabate 100 (green) for cavities 100 - 110mm wide

Accessories

Standard Flange ClipFor use as a weathercheck, for fixing closer profiles to window frameand for retaining partial fill insulation batts in the cavity.

Reveal ClipThis aids construction of check reveals and gives added protection tothe frame.

Flange Extension ClipThis clips over Thermabate to extend the width of the fixing flange. Itenables positive fixing of frame over suspect masonry.

Jointing ClipThis connects two Thermabate sections for use in cavities greater than 110mm wide.

Profile BracketThese brackets have been developed to enable Thermabate rigid box sections to be formedinto a profile. This is built in as the work proceeds and creates a pre-formed opening intowhich window frames can be fitted later.The brackets are made of strong, re-usable polypropylene and supplied in packed sets of four.

Optional Wall Fixing TieThe tie is an optional/additional fixing and is particularly useful for widercavities and/or in using Thermabate to form openings. The tie isdesigned with different angled ends which slot securely between the teeflanges at the "back" of the Thermabate section and keys fully into themortar bed joint of either masonry skin. They are moulded PVC-Usupplied in packs of 150.

Thermabate Curved SectionsThermabate can be factory formed to any specified radius for bullseye windows, curved heads, etc.


Bri

ckw

ork

Pro

duct

s


Insulated Cavity Closers Supafix• An economic rigid PVCu insulated Cavity Closer for

second fix installations• Cavity widths 50-100mm• 2.1m and 3.0m stock lengths• Complies with Building Regulations Part L

TF1000 and TF2000• A versatile insulated cavity closer for first or second fix installations• Cavity widths 50mm to 160mm• 2.1m and 3.0m stock lengths• Complies with Building Regulations Part L

Check reveal optionalso available.

Frame Formers• Saves time on site• Part L compliant• Accepts all window and door materials• Insulation is zero rated for ozone

depletion potential (ODP)• Available in two profiles D2000 and

D3000 (for internal fixing)• BBA approved, certificate no 98/3474

Insulated Cavity Closers Supafix | TF1000 and TF2000 | Frame Formers

150mm

130mm

20mm 40mm

20mm 40mm

20mm

20mm

200mm

150mm

25mm

20mm

180mm

150mm

25mm

TF2150

CTF2150

Flush/Standard

Check Reveal

Step 1 Step 2 Step 3



Insulated Fire Rated Cavity ClosersSupafix Fire Rated Insulated Cavity Closer• A PVCu cavity closer with mineral wool insulation• 60 minute Fire Integrity Rating• Cavity widths 50-100mm• Complies with Building Regulations Part L • Warrington Fire Research – 60 Minutes fire integrity• BBA approved, certificate no 98/3474

D2000 Fire Rated Insulated Cavity Closer• A cavity closer with mineral wool insulation for first or

second fix installations.• 30 minutes Fire Integrity• Complies with Building Regulations Part L• Available as a Frame Former• Warrington Fire Research – 30 Minutes fire integrity• BBA approved, certificate no. 98/3474

Dacablock Fire Rated Insulated DPC• DPC with Mineral Wool Insulation• Fire rated with 60 minute Fire Integrity• For use with traditional block return construction• Warrington Fire Research – 60 Minutes fire integrity• BBA approved, certificate no. 98/3474

Insulated Cavity ClosersSupafix Fire Rated | D2000 Fire Rated | Dacablock Fire Rated

20mm 40mm

150mm

20mm

130mm

20mm

20mm 40mm

150mm

50mm75mm

25mm

50mm

Flush/Standard

Check Reveal


Bri

ckw

ork

Pro

duct

s


Ancon ST1 (Type 1)The Ancon ST1 is suitable for cavities from 50mm to 150mm and can be used for all types ofbuildings of any height, anywhere in the British Isles. The ST1 has a measured dynamicstiffness of <113MN/m3 that meets the performance requirement of building regulationsPart E for use in external masonry walls. Lengths: 200, 225, 250, 300mm

Ancon SD1 (Type 1)Type 1 Tie (see ST1 for application details)

Ancon SPSStandard Lengths: 150, 200, 225, 250, 275, 300mm Please specify 3 x 20mm section for collar-jointed construction

Ancon PPSStandard Lengths: 150, 200, 225, 250mm

Ancon Debonding SleevesDebonding sleeves are used on plain-ended wall ties at vertical movement joints. The tie willrestrain the masonry against lateral wind loads but the sleeve will allow the masonry to expandor contract. A 120mm long sleeve will provide an allowance for movement and tolerance,and will be suitable for most applications. Other lengths and sizes available to specialorder. Length: 120mm

Staifix Insulation Retaining ClipThe red Staifix Insulation Retaining Clip will fit all Ancon and Staifix standard wall ties.Size: 80mm Diameter. Pack Sizes: Bags of 20 or 250

Ancon Two-Part TieCavities exceeding 150mm are sometimes required. This necessitates longer ties which can bedifficult to balance and keep horizontal when built into the inner leaf. The Ancon Two-Part Tiehas one section built into the blockwork; the other section is then fixed as the outer leaf isbuilt. The inner tie is usually manufactured in lengths of 170mm. Variation in the cavitywidth is accommodated by the length of the outer tie. An embedment of 75mm isrequired at each end. Length: Manufactured to order

Staifix RT2 General Purpose Tie (Type 2)Designed to replace the double triangle tie, the Staifix RT2 is a general purpose tie. It issuitable for cavities from 50mm to 100mm and can be used for domestic houses and smallcommercial buildings up to 15 metres in height. The Staifix RT2 has BBA approval andmeets the technical requirements of the NHBC. The RT2 has a measured dynamicstiffness of <113MN/m3 that meets the performance requirement of buildingregulations Part E for use in external masonry walls.Lengths: 200, 225mm. Pack Sizes: Bags of 20, Boxes of 250

Staifix HRT4 Housing Tie (Type 4)Designed to replace the butterfly tie, the Staifix HRT4 is a housing tie suitable for cavities from50mm to 100mm in domestic houses up to 10 metres in height. The Staifix HRT4 has BBAapproval and meets the technical requirements of the NHBC. Independent tests have proventhe Staifix HRT4 has a measured dynamic stiffness of <4.8MN/m3 at a 50mm cavity andis therefore suitable for separating (party) walls. Lengths: 200, 225mm. Pack Sizes: Bags of 20, Boxes of 250

Ancon DT Double TriangleLengths: 150*, 200*, 225*, 250, 300mm*Type 2 Tie (see RT2 for application details)

Wall Ties



Frame Cramps Hammer-On Ties | Briclok | Column Ties

Ancon Hammer-On Fixing SystemsAncon non-drill fixings:• Eliminate the dangers associated with shot-firing and drilling• Quick, simple and economical to install• No power tools, special skills or equipment required• Either abut the column or attach to the flange

Hammer-On FixingAvailable in five sizes to accommodate a steel thickness from7mm to 25mm, this fixing is simply hammered onto the flange.It can be utilised either on a column with a tie or on a beamwith an internal head restraint.The Hammer-On Fixing resists load in one direction only andshould be installed on alternate sides of the flange. Ties should be installed at 225mm vertical centres and headrestraints at 450mm horizontal centres.

Internal Column TiesStandard Column ties are available in seven sizes, the tie fits between the flange of a columnand should be installed at 225mm vertical centres.

Ancon BriclokBriclok is a quick and simple way of tying masonry to a steelframe. The tie is positioned with the most suitable notcharound the column flange with no less than 10mmengagement. The tie must not be forced onto the flange. Lengths: 150, 180mm

Internal Column TiesLength Beam/Column Accommodated179mm 203 x 203 UC186mm 203 x 133 UB224mm 254 x 254 UC232mm 254 x 146 UB275mm 305 x 305 UC281mm 305 x 127 & 165 UB330mm 356 x 127 & 171 UB

Ancon BriclokProduct Code Length Open Cavity* Flange ThicknessBriclok150A 150mm 20-50mm 6.8-13.5mmBriclok180A 180mm 50-80mm 6.8-13.5mmBriclok150B 150mm 20-50mm 13.5-20.0mmBriclok180B 180mm 50-80mm 13.5-20.0mm* Open cavity at column face.

Hammer-On FixingHammer-On Flange ThicknessSection Ref. AccommodatedXS 7-10mmS 10-13mmM 14- 17mmL 18-21mmXL 22-25mm

Ancon Column TiesAncon Column Ties, which clamp to the flanges of structural steel columns, can be usedacross the cavity to the brickwork or back into the blockwork. These are available indifferent lengths and will accommodate flanges from 6mm to 25mm.Length: Manufactured to order.


Bri

ckw

ork

Pro

duct

s


Ancon SPBStandard Lengths: 75, 100, 125, 150, 175, 200mm

Ancon SDBStandard Lengths: 125, 150, 175, 200, 225mm

Ancon PPBStandard Lengths: 125, 150, 175, 200, 225mm

Ancon SPVStandard Lengths: 75, 100, 125, 150, 175, 200mm

Ancon SDVStandard Lengths: 125, 150, 175, 200, 225mm

Ancon PPVStandard Lengths: 125, 150, 175, 200, 225mm

Ancon SRBReplaces wire ended frame crampsStandard Lengths: 125, 150, 175, 200mm

Ancon ISO-TW Isolation WasherThe Ancon ISO-TW Isolation Washer allows frame cramps to be vertically adjusted to suit mortar joint levels.

The ISO-TW has been designed for use with Ancon stainless steel frame cramps referenced_ _ V (eg PPV) when fixing to mild steel frames. In addition to separating the dissimilar metals

to avoid bi-metallic corrosion, this innovative washer enables the frame cramp to be verticallyadjusted within the 30mm range of the slot in the upstand.

Channel Ties

Ancon SP21Standard Lengths: 75, 100, 125, 150, 175, 200mm

Ancon SD21Standard Lengths: 75, 100, 125, 150, 175, 200, 225mm

Ancon PP21Standard Lengths: 75, 100, 125, 150, 175, 200, 225mm

Frame Cramps

Wall Starters

Ancon 36/8 Wall Starter System The 36/8 Wall Extension System can be supplied with either SP36 tiesor, where some longitudinal movement must be accommodated at thejoint, PP36 ties complete with debonding sleeves. The channel can besupplied in lengths of up to 3.4 metres with each length having aseries of holes to allow fixing to the existing wall. The system isavailable as a kit comprising a length of 36/8 channel 2400mm long,six ties and five plugs and screws.

Staifix Universal Wall Starter SystemThis system includes all necessary fixings to join a single skin of masonry, 2400mm high, to anexisting wall. Each pack includes 2 fixing strips, 5 plugs, 5 washers, 5 screws and 10 wall ties.Suitable for wall widths from 60mm to 250mm and masonry up to 8 metres in height, thissystem will resist a wind load of up to 4.5kN over a height of 2400mm. Wall Ties slide withinthe fixing strip to course with the bed joints of any masonry unit. This Universal Wall StarterSystem meets the technical requirements of the NHBC.



Channel


Ancon 21/18 Omega Ancon 21/18 Omega is a high performance, self-anchoring,cast-in channel slot suitable for use with Ancon wall tiesreferenced _ _21 to provide the necessary restraint to theouter leaf of masonry. Lengths: 100, 3000mm

Ancon 25/14, 28/15, 30/20, 38/17 and 36/8Ancon wall ties can also be used with Ancon 25/14, 28/15,30/20, 38/17 and 36/8 channels.

Ancon FastrackAncon Fastrack Channel is built into the inner leaf ofblockwork ready to take an Ancon SD28 or similar tie for theouter leaf. This method of construction avoids the dangers ofprojecting ties. Ancon Fastrack Channels and Ties can besupplied in different lengths and can also be used for tying stonework to blockwork if DD28 orsimilar Ancon Ties are used.Lengths: 100, 150mm

Head Restraints

Head Restraints Ancon Head Restraints provide the necessary restraint to the top of masonry walls. They allowfor vertical movement to accommodate shrinkage or thermal movement of the wall orstructural frame, while restraining wind loads.

Ancon IHR – Internal Head RestraintIHR-B, IHR-V, IHR-C, IHR-HThe sliding tie can be provided with a hole or slot tosuit M8 bolts, with a notch end to fix directly into a38/17 or 30/20 channel. The sliding tie can beprovided with a hole or slot to suit M8 bolts, with anotch end to fix directly into a 38/17 or 30/20 channeland with a notch end to suit the HAMMER-ONsection that attaches to a steel flange without drilling.The standard Ancon IHR will suit a 215mm high blockand can resist a load of 1.5kN. Other sizes between150-250mm are available. Length: To suit 215mm high block

Ancon FHR - Head RestraintThe two angles clamp the top of the wall and have 9mm diameterholes to suit M8 bolts. They are supplied with two holes in thelonger angle to allow the restraint to fit 100mm and 140mmblockwork. Each restraint can resist a service load of 1kN. Sizes: To suit 100, 140mm blocks.


Bri

ckw

ork

Pro

duct

s


Sliding Anchors

Ancon SAH - Sliding AnchorsAncon SAH Sliding Anchors have stems which fit within the cavity and accept ties that slide toaccommodate vertical movement. Available with seven different head options as standard, theyare supplied with one-way or two-way ties with safety ends.The standard fixing hole is 12mm diameter to suit Ancon M10 Single Expansion Bolts or M10 THead Bolts to fit Ancon 28/15 Channel. Ancon SAH Sliding Anchors have 25 x 5mm stems anda maximum service capacity of 1kN per stem when the upper tieis within 75mm of the fixing. Ties should be spaced at a minimumof 150mm and at least two ties should be used per stem. Thesedrawings are examples only. All sliding anchors are manufacturedto suit individual requirements.

SAH-F, SAH-T, SAH-U, SAH-UF, SAH-UO, SAH-UT, SAH-UCLengths: Manufactured to order340mm minimum – 600mm maximum

SIS (Two-Way Tie)SPI (One-way Tie)Sizes: Manufactured to order

Remedial Wall Ties

Ancon 63 Mechanical/MechanicalUsed when tying together two leaves of solid materials, this tie hasmechanical expanders at each end. Requires 10.5mm holes.

Ancon 63 Resin/MechanicalFor use when the material in the inner leaf is perforated, of low-density or afriable material. A resin fixing may be used to eliminate any imposedstress. Requires 10.5mm or 11mm holes.

Staifix Resin/ResinUsed where mechanical expanders are unusable. Normally inserted into a 10mm hole,but if test facilities are required, a 12mm hole must be used. A plastic sieve canbe used to retain resin and is particularly useful in perforated brick orhollow blockwork. A 12mm hole is required to fit the sieve.

Stairib BarStainless steel ribbed bar, resin-grouted into the inner and outer leaves.

Ancon AC 31Used where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm hole. The triangular end sits in the bed joint.Ancon AC 31 can be supplied with a drip or a neoprene ring.

Ancon AC 31CSimilar to the AC 31 but cranked by 25mm to aid fixing to the inner leaf.

Cameron T 47Used for the repair of mass brickwork with an unbonded brick façade, sometimes built fromsnapped headers. The T end is built into the bed joint and perpend, and hidden whenthe brickwork is repointed.



Windposts WP1 | WP2 | WP3 | WP4

Windposts and Parapet PostsAncon Windposts span vertically between floors to provide additional lateral support for largepanels of brickwork or panels with openings. The range consists of WP2 Windposts that can beinstalled into the inner leaf of blockwork, WP1 and WP3 Windposts for installation within thecavity that leave the blockwork undisturbed and WP4 Windposts for internal, single skinblockwork walls. Parapet posts are used as vertical support for brickwork in either parapet orspandrel panels. Ancon Windposts and Parapet Posts are designed to suit specific applications.

They are complete with end connections and ties which fit into the vertical slots in the flangesof the channel section.

WP1 / WP3 WindpostsChannel section windposts which are designed to be installed within the cavity leaving theblockwork undisturbed.

WP2 WindpostsAngle section windposts designed for either small cavitiesor where wind loads are high. One leg of the anglewindpost is built into the blockwork, and the blockwork tiedthrough the leg of the windpost to minimise any possiblemovement or cracking of internal finishes. If a vertical movement joint is required in place of atied joint, ties with a plain end on one side can be supplied.

WP4 WindpostsGenerally used in internal blockwork walls thathave a 'fair faced' finish to both sides and wherethe windposts cannot protrude beyond either face. Sometimes referred to as 'spine' posts theyare flat plates designed to fit within the wall. Although the depth of a WP4 post is limited by thewidth of the masonry (ideally 20mm less than the wall width) the thickness of the post can varyto increase its load capacity. Blockwork is tied through the post. Debonded ties can be used ifthe post is positioned at a movement joint.Ancon Windposts are designed and manufactured to suit each individual project. Sufficienttime should be allowed for the design, approval and manufacturing process when placingorders for windposts.

WindpostsWP1 WP2 WP3 WP4a x b x t a x b x t a x b x t a x t60 x 60 x 4 125 x 70 x 4 85 x 60 x 4 90 x 880 x 60 x 4 140 x 70 x 4 85 x 60 x 5 100 x 855 x 60 x 4 130 x 70 x 6 95 x 60 x 5 110 x 855 x 60 x 5 155 x 70 x 4 105 x 60 x 5 120 x 865 x 60 x 4 170 x 70 x 4 115 x 60 x 565 x 60 x 5 150 x 70 x 6 115 x 60 x 675 x 60 x 4 160 x 70 x 6 115 x 65 x 875 x 60 x 5 185 x 70 x 4 85 x 60 x 4

150 x 80 x 8185 x 70 x 5160 x 80 x 8200 x 70 x 5

Note: a = depth, b = width, t = thickness


Bri

ckw

ork

Pro

duct

s


Masonry Reinforcement

Masonry Reinforcement Ancon Masonry Reinforcement offers a low cost solution to the corrosion problems associatedwith conventional reinforced masonry. The use of stainless steel minimises the need for closecontrol of mortar cover and ensures continuing structural performance throughout the life ofthe building or structure.

The lightweight Ancon ladder and lattice type reinforcements are highly ductile and readily cutand shaped on site. This material is totally compatible with Ancon’s other stainless steelmaterials and provides many design solutions where structural composite action is required.Ancon Masonry Reinforcement conforms to BS 5628: Part 2: 2000.

TMRLattice-type reinforcementStandard Widths: 50, 100, 150mm

TMR SMR

Wall TiesA range of ties is available to suit Ancon Windposts. SDN Ties are used to the outer leaf andSPN Ties to the inner leaf. SNS Ties are used across the posts in the inner blockwork and canbe supplied with a debonding sleeve for use where there is a vertical movement joint. All tiesare designed and supplied to suit the specific application.

SPN

SDN

SNS

SMRLadder-type reinforcementStandard Widths: 60, 100, 150, 225mm

Helibar Crack Stitching

Helibar Crack Stitching• Austenitic stainless steel reinforcing bars• Fully concealed, non-disruptive repair system• Cost-effective and more reliable than crack injection methods• HeliBond cementitious grout is injectable and rapidly produces high compressive strength• HeliBar rods and HeliBond grout produce excellent bond strength within the masonry• HeliBars combine great axial strength with flexibility.• No additional stresses introduced• Tensile loads redistributed along the masonry• Masonry remains flexible enough to accommodate normal building movement• Minimises chances of the crack developing

Helifix AncillariesRemedial Wall Tie SystemResiTie - 6mm Remedial Wall Tie with a Resin / Resin FixHeliBond Grout

Helibar Crack StitchingSize6mm x 1, 1.5m



Masonry to Masonry Ties

Heavy Duty TiesVT1 - Stainless steel formed tie.

EN1 - Stainless steel, vertically twisted tie, safety ended.

VE1 - Safety ended, vertical twisted tie.

General & Light Use TiesV26 - Double Triangle Tie, double or single drip format, stainless steel only, for useup to 15m or 3 storeys.

VE2 - General purpose tie, stainless steel. for use up to 15m or 3 storeys.

VE4 - Light duty housing tie (assessed by the NHBC for use in party walls), foruse up to 10m or 2 storeys.

VO1 - Traditional Butterfly Tie in stainless steel only, for use up to 10m or 2 storeys.

Heavy Duty TiesType Cavity Width Tie LengthVT1 50-75mm, 76-100mm, 101-125mm 200, 225 & 250mmEN1 50-75mm, 76-100mm, 101-125mm, 126-150mm, 151-300mm 200, 225, 250, 275, 300mmVE1 50-75mm, 76-100mm, 101-125mm, 126-150mm, 151-300mm 200, 225, 250, 275, 300mmT.P.T. 300 to 450mm See Two Part Ties

General & Light Duty TiesType Cavity Width Tie LengthVE2 50-75mm, 76-90mm, 91-100mm 200, 225 & 250mmV26 50-75mm, 76-90mm, 91-100mm 200, 225 & 250mmVE4 50-75mm, 76-90mm 200 & 225mmV01 50-75mm, 76-90mm, 76-100mm 150-300mm

Movement Ties

B20 - Blank Slip TieA tie for use across vertical movement joints, complete with de-bonding sleeve,available as a blank bar (B20) or with a safety embedment detail on one end(SPE). State overall size.

V8PE - Dovetail Tie Plain EndThis product allows lateral movement between masonry and a fixed channel orslot section. Supplied complete with debonding sleeve, State projection. Also seethe Channel System solutions.

SPE - Safety TieState overall length.

V7PE - Frame Cramp Plain EndTies for restraining masonry to steelwork, whilst allowing lateral movement, V7PEfor face fixing, V63PE for side fixing, supplied complete with sleeve. Stateprojection.

V63PE - Clasp Tie Plain EndState overall length.


Bri

ckw

ork

Pro

duct

s


Lateral Restraint Ties

VE7 - Frame Cramp Safety EndCramp, in stainless or galvanised steel, for restraining masonry to new or existingstructures, and for building in non-structural elements (frames etc.) holed for screwing,bolting or shotfiring, sizes 75mm projection to 150mm, non stock sizes to order.

V96 - Wire Frame Cramp Welded Wire Cramp, for all applications as the VE7, with added flexibility providedby a wire projection, minimum projection 125mm.

V63 - Clasp TieClasp Tie, for restraining masonry back to vertical elements of structure, completewith fixing holes, safety embedment detail.

V97 - Wire Clasp TieApplication as for clasp tie but with extra flexibility provided by a wire section.(Available in stainless steel only).

Cast-In / Face Fix Channel System

V60 28/15 Face Fix / Cast In ChannelA channel and tie system designed for face fixing, either by bolting, plugging andscrewing, or with the addition of welded tangs by building in. Available instandard sizes of 100mm, 150mm and 3m lengths.

V29 - Dovetail SlotCast in dovetail slot, available in stainless steel or pre-galvanised material, pre filled withpolystyrene (to prevent concrete ingress). Standard lengths of 75mm, 100mm, 150mmand 3m. Ties to suit with safety ends; welded (V98) or solid (VS8). (Welded ties instainless steel only).

VS8 - Dovetail Tie Safety EndAvailable in sizes 75mm to 200mm

Remedial Ties

Head Restraint

VIR - Head RestraintThe VIR head restraint is designed to resist lateral movement in wall heads, restrainingthem to structural soffits whilst allowing vertical movement (in order, for instance toaccommodate beam deflection).

VHR - Head RestraintThe VHR is a very simple, economical head restraint product, twice holed toaccommodate 100 or 140mm walls. Vertical movement can be accommodated onlyby allowing clearance between the top of the blockwork panel, and the underside ofthe restraint angle.

V30 - Remedial Wavy Tail TieStainless steel “Wavy” Tail Ties, for remedial applications, available in lengths of150 to 300mm, designed for use in conjunction with resin anchors.



Masonry Joint Reinforcement Bricktor® CCR

Bricktor® CCRBricktor® CCR is a crack control reinforcement product which can beused for both standard masonry joints and 2 - 3mm thin jointsystems. Late 2005 saw the redesign of original Bricktor to meet thedemands of 21st century construction techniques.Supplied in a roll, Bricktor is manufactured from high tensile wire. Itscross wires are designed in a square welded format which allowseasier application into the bed joint. It is available in both stainlesssteel and galvanised finishes. Galvanised Bricktor is for use in internalwalls only. For external walls (including inside leaf of cavity wall)stainless steel Bricktor must be used.Used in thin joint aircrete construction, the welded wire mesh isapprox. 1.5mm in thickness which lies easily within 2 - 3mm mortarjoints.

QualityStainless steel wire – Grade 304S15.Galvanised steel – zinc coated 60g/m2.Wire characteristics – longitudinal wires – 1.25mm diameter, cross wires – 0.65mm diameter.

Sizes• Supplied as 25m roll.• Minimum overlap 225mm.

Masonry Joint Reinforcement Brickforce®

Brickforce®

Brickforce is designed for structural reinforced masonry applications. It complies fully with therequirements of the Reinforced Masonry Design Code – BS 5628-2.Brickforce consists of two main parallel wires joined by in-line welded cross wires. The mainwires are manufactured to a flattened profile to enable the product to be easily located intothe mortar joint without steel build-up problems at lap positions corners/junctions, or whenused in conjunction with wall ties. It is available in both stainless steel and galvanised finishes.

QualityStainless steel wire to BS 5628-2.Galvanised steel wire zinc coated to BS EN 10244-2.Main wires – flattened profile, equivalent diameter to suit designrequirements with a minimum characteristic tensile strength of500n/mm2.Sizes• Brickforce is manufactured in 2.7m long strips and supplied inpacks:• Stainless steel Brickforce packs contain 20 strips (54m per pack).• Galvanised Brickforce packs contain 25 strips (67.5m per pack).• Minimum overlap 225mm.

Continued overleaf

Bricktor® CCRStainless Steel Galvanised No. of main wires To suit wall width SBT60CCR GBT60CCR 4 100–125mmSBT100CCR GBT100CCR 6 140–150mmSBT160CCR GBT160CCR 9 190–200mmSBT180CCR GBT180CCR 10 215mmNote: For wall widths greater than 225mm, a combination of narrower roll widths may be used.


Bri

ckw

ork

Pro

duct

s


BrickforceCode Reference Code Reference Wire Diameter Wall Thickness (mm)Stainless Steel GalvanisedSBF30W60 GBF30W60 3mm 102 brick or 100 blockSBF35W60 GBF35W60 3.5mm 102 brick or 100 blockSBF40W60 GBF40W60 4mm 102 brick or 100 blockSBF45W60 GBF45W60 4.5mm 102 brick or 100 blockSBF50W60 GBF50W60 5mm 102 brick or 100 blockSBF30W100 GBF30W100 3mm 140 blockSBF35W100 GBF35W100 3.5mm 140 blockSBF40W100 GBF40W100 4mm 140 blockSBF45W100 GBF45W100 4.5mm 140 blockSBF50W100 GBF50W100 5mm 140 blockSBF30W150 GBF30W150 3mm 190/200 blockSBF35W150 GBF35W150 3.5mm 190/200 blockSBF40W150 GBF40W150 4mm 190/200 blockSBF45W150 GBF45W150 4.5mm 190/200 blockSBF50W150 GBF50W150 5mm 190/200 blockSBF30W175 GBF30W175 3mm 215 blockSBF35W175 GBF35W175 3.5mm 215 blockSBF40W175 GBF40W175 4mm 215 blockSBF45W175 GBF45W175 4.5mm 215 blockSBF50W175 GBF50W175 5mm 215 block

Product code describes finish, wire diameter and product width.i.e. SBF35W60 = Stainless steel for external walls including internal leaf of cavity.

Brickforce 3.5mm dia wire 60mm wide.GBF40W100 = Galvanised for internal walls only (partitions of cross walls). Brickforce 4.0mm dia wire 100mm wide.

Notes: Other widths and customised components available.

Exmet Reinforcement

Exmet ReinforcementReinforced brickwork is preferable to unreinforced in all types ofbuilding because steel reinforcement adds tensile strength to theinherent compressive strength of this traditional construction method.Reasons why you should select stainless steel or galvanisedExmetfor reinforcing brickwork;• Exmet is a length of expanded stainless or galvanised mesh with

continuity of steel throughout.• Exmet has no joints, welds or interweaving to fail under stress.• Once mortared into brickwork the diamond-shaped meshes are

anchored immovably so that the reinforcement cannot slip undertension.

Exmet ReinforcementMaterial Thickness Coil Size Width Coil Size Length Suitable for Minimum Wall Thickness0.3mm 65mm 20m 75mm0.3mm 115mm 20m 140mm0.3mm 175mm 20m 190mm0.3mm 225mm 20m 250mm



Lintels

LintelsLintel Benefits‘Top hat’ profile achieved without welding offers significantdurability and structural advantages:• Maintains the integrity of the wall structure and its thermal

properties• Design and polystyrene infill gives excellent thermal

efficiency - ‘U’ value of less than 0.45W/m2K• No differential expansion of dissimilar materials associated

with box section lintels• Grooved polystyrene in cavity and semi-pierced slots on the inner flange provide excellent

‘key’ for the plaster finish

Expamet Cavity Wall LintelsCavity Width Product Type Lengths* Lengths* Lengths*

Standard Heavy Duty Extra Heavy Duty50, 60, 70mm EX50E 750 – 2700mm50, 60, 70mm EX50EWI 750 – 2700mm50, 60, 70mm EX50S 750 – 4800mm EX50H 750 – 4200mm EX50XH 750 – 2700mm50, 60, 70mm EX50SWI 750 – 4200mm EX50HWI 750 – 2700mm EX50XHWI 750 – 2400mm50, 60, 70mm EX50SWO 750 – 3600mm70, 80, 95mm EX75E 750 – 2700mm70, 80, 95mm EX75S 750 – 4800mm EX75H 750 – 4200mm EX75XH 750 – 2700mm70, 80, 95mm EX75SWI 750 – 4200mm EX75HWI 750 – 2700mm EX75XHWI 750 – 2400mm70, 80, 90mm EX75SWO 750 – 3600mm95, 100, 110mm EX95S 750 – 4800mm EX95H 750 – 4200mm EX95XH 750 – 2700mm95, 100, 110mm EX95SWI 750 – 4200mm EX95HWI 750 – 2700mm EX95XHWI 750 – 2400mm95, 100, 110mm EX95SWO 750 – 3600mm110, 125mm EX110S 750 – 3600mm130, 145mm EX130S 750 – 3000mm150, 165mm EX150S 750 – 3000mm

*In 150mm incrementsE = Eaves (Single Wall) Lintel, S= Standard, H = Heavy Duty, XH – Extra Heavy DutyWI = Wide Inner Leaf, WO = Wide Outer Leaf

Soffit Vent Mesh

Soffit Vent MeshA durable corrosion resistant steel mesh used at eaves vents to exclude birds and insects.

Soffit Vent MeshSize75mm x 30m


Bri

ckw

ork

Pro

duct

s


Underfloor Ventilation Telescopic

Underfloor VentilationTAV (Telescopic Adjustable Ventilator) extends or contracts like a telescope to a maximum offive brick courses.It is designed to accommodate the high performance cavibrick, or may alternatively be usedwith a conventional air-brick. Airflow can be directed to a specific area of the structure, at adifferent level. The type TAV offers an unobstructed airflow route to promote best practice. • Unobstructed airflow route• Extends and retracts to suit course level• Accompanying cavitray to provide damp proofing integrity• Horizontal and vertical extension sleeves

Underfloor Ventilation Cavibrick

CavibrickManufactured to brick dimensions, the new Cavibrick is a multi-purpose module forincorporation within masonry walls. It may be used with a range of compatible straight andtelescopic sleeves, to ventilate specific areas, rooms or voids. The louvres are proportioned tomaximise performance and spaced to comply with the latest British Standards requirements.The staggered louvres also offer an insect resistant status, which is not enjoyed on somestandard airbricks.• High throughput• Insect screening• Self-draining base• Clip together to make up composite sizes• Range of colours include;

Terracotta, Slate, Beige, Brown and White

Accessories

Extension Sleeves• Vertical or horizontal• Unobstructed airflow• Available in special lengths• 300mm and 450mm lengths

Type TAV to Round Connector• Fits standard pipe• Unobstructed airflow• 100mm to 50 x 225mm

Through Wall VentilationTAVSize Extended height225mm x 70mm 225–370mm

(up to 5 brick courses)

Underfloor VentilationCavibrickSize220mm x 60mm



Weep Vents Type W | Euroweep

Accessories

Cavibrick Sleeves• Fold flat storage• Unobstructed airflow

Cavibrick Rectangular to Round Converter Sleeve• Fits standard pipe• Unobstructed airflow• 50mm to 100mm x 225mm

Cavibrick SleevesSize225mm x 75mm225mm x 150mm225mm x 225mm

TypeW Cavitray Weep Vent• Dual-function combined weep and ventilator• Insect-resistant grille• Integral water-check baffles• Superior air throughout and water discharge capability• Optional render protection cover, keeps grille clean during

installation• Range of colours include; Grey, Black, Beige, Brown, White,

Terracotta and Translucent.

EuroWeep-ventAlternative peep/weep ventilator• Dual-function weep and ventilator• Integral baffle• Vertical front• Reduced size without bottleneck exit route

Leaded Cavity Trays

Stepped Leaded TraysUsed in 75mm brick coursing. When ordering state cavity width; 50, 75 or 100mm, Roof pitch(minimum 17.5°) and whether long or short leads are required. Long leads are for profiled tiles,short leads for plain tiles.

Corner Starter Trays(LH) Short lead.

Stopend Starter Trays(LH) Short lead.(LH) Long lead.

Leaded Intermediate Trays(LH) Short lead.(LH) Long lead.

Leaded Ridge Trays

Horizontal Trays

Corner Units

Leaded Cavity TraysRoof Pitches

Corner Starter Trays 17.5–22°, 22.5–27°, 27.5–50°Stopend Starter Trays 17.5–22°, 22.5–27°, 27.5–50°Leaded Intermediate Trays 17.5–22°, 22.5–27°, 27.5–50°

Horizontal TraysSizes460, 880mm

Corner UnitsTypeExternalInternal


Bri

ckw

ork

Pro

duct

s


Through Wall Ventilation G930

G930 Combination AirbrickDesigned to provide high levels of ventilation into cavity walls andunder floor voids. The airbrick incorporates a front mounted grillwhich consists of evenly spaced openings specifically sized toprohibit large insects gaining access but wide enough not to beblocked by debris, paint or water droplets.A mortar key around the fabric of the airbrick ensures secure adhesion to the building fabricwhile a clip together facility provides a choice of ventilation sizes.

Weep Vents G950 | G951

G950 Weep Vent Generally used to drain lintels, cavity trays and to ventilate cavity walls. Thevent has a baffled grill to prevent the ingress of driving rain and wind whileincorporating a insect grill and drip lip.

G951 Peep Weep Provides an unobtrusive solution to cavity wall drainage requirements. The weep features amortar key to ensure adhesion to the building fabric and an external rib to aid positioning. Therib surrounds a 62mm high opening to prevent mortar blockage from withinthe cavity. The weep’s protective hood which when fitted “peeps” out fromthe brick fascia is designed to guard against blockage during installation and stops penetration of wind driven rain. The exit hole is ample for waterdrainage but small enough to prevent entry of large insects.

Underfloor Ventilation G960 | G961 | G962 | G935

G960 Telescopic Under Floor Void VentilatorDesigned to provide a clear airflow passage to the void underneath asuspended floor. The telescopic feature enables the G960 to adjustvertically between three and five brick courses.The rear of the vent features a rodent grille consisting of evenly spacedslots specifically sized to prohibit entry of rodents and building debriswhich could block the vent. The front aperture is able to take a G930Combination Airbrick or a clay airbrick albeit with a reduced airflow.

Accessories

G961 Vertical Extension SleeveDesigned for use with the G960 Telescopic Under Floor Void Ventilator. Eachextension sleeve enables a further two course brick adjustment vertically.Alternatively the sleeve can also be clipped to the base of the G960 to providehorizontal extension through larger cavities or wider internal blockwork.

G962 Remote Void VentilatorDesigned to connect the G930 Air Brick or G960 Under Floor Vent to a 4” RoundPipe. The adapter fits directly onto the bottom of the G960 Under floor Vent andcan be easily cut down between the pre moulded cut lines to fit the G930Airbrick.

G935 Combination Cavity SleeveDesigned to fit to the back of a G930 Combination Airbrick 9’’x 3’’. Alternatively it can bestacked to form 9’’ x 6’’ or 9’’ x 9’’ formations. A telescopic ability enables the G935 to adjust tofit cavity widths of 50mm to 100mm. Further horizontal extension is possible with the additionof extra units.

BRICKTOP BRICKTOP

BRICKTOP BRICKTOP



Brickwork Accessories Joint Fillers

Closed Cell Polyethelene foam Closed Cell Polyethelene foam supplied in sheet or strip form. High performance expansionjoint fillerboard, for concrete slab construction and brickwork joints, which is supplied with anundercut to the depth of sealant for controlled void formation and easy removal.

Closed Cell Polyethelene foam sheetsSupplied in sheet size 1.5m x 2.2m = 3.3m2 ThicknessesClosed Cell Polyethelene foam sheets 10, 12, 15, 20, 25mm

Closed Cell Polyethelene foam stripsSupplied in 2.2m stripsWidth Thicknesses100, 125, 150, 175, 200, 225, 250mm 20, 25mm

Closed Cell Polyethelene foam rollsSupplied in 10m rollsWidth Thicknesses100, 125, 150, 175, 200, 225, 250mm 10mm

Compriband VSA | Super

CompribandCompriband VSA and Super form part of a specialist range of joint sealants designed to copewith movement caused, for example by temperature changes, settlement, vibration or wind.

Compriband VSA - is a bituminised foamed polyurethane sealing strip of great elasticitywhich can accept extreme compression without sideways expansion.

Compriband Super - is expanded polyurethane foam impregnated withwaxes and neoprene to form a high quality, low cost and efficient strip sealant.

• Joints for thermal or differential movement • Seals for curtain walling and cladding panels • Perimeter seals for window and door frames • Abutment seals for conservatories and canopies • Tunneling and guttering seals• Seals for ductwork and air conditioning • Joints for portable or sectional buildings • Seals for rooflights, windows and timber framed buildings • Automotive and highway applicationsCompriband VSA l SuperSize ref. Gap Size Tape Width / Joint Depth Expanded Thickness Roll Length2 2mm 10mm 10mm 8m3 2-3mm 10mm 15mm 6m4 3-4mm 15mm 20mm 6m5 4-5mm 15mm 25mm 4m6 5-6mm 15mm 30mm 4m8 7-8mm 20mm 40mm 4m10 9-10mm 25mm 50mm 4m12 10-12mm 30mm 60mm 3m16 14-16mm 40mm 80mm 3m20 17-20mm 50mm 100mm 3m25 22-25mm 60mm 120/125mm 3m


Bri

ckw

ork

Pro

duct

s


Brickwork Accessories Brickclean

Brick & Concrete Cleaning Material

AdocleanA specially selected blend of inorganic acids for the removal of cementitious contaminationsand efflorescence from brickwork. Removal of rust staining from concrete.The cleaner can be further diluted depending upon application. In all cases of staining thecause should be identified.

Application Instructions;To remove stains or mortar. Thoroughly saturate the area with water. Apply by brush a 50/50solution of Adoclean and water, scrub lightly with a hard brush followed by rinse of water.Heavy mortar deposits may require repeated applications of Adoclean whilst lightly wirebrushing and rinsing with water. Available in 5 and 25 litre cans.

Wall InsulationWe can supply the widest range of solutions to meetcompliance with Part L/J of the building regulationsfor full fill and partial fill cavity wall insulation. Some ofthe most popular products available by application areoutlined in the table below;

Wall InsulationProduct Full Fill Cavity Wall Partial Fill Cavity WallCrown DriTherm Cavity Slab Yes YesCrown DriTherm Cavity Slab Yes YesDow Wallmate CW-X No YesJabfill Yes NoKingspan Thermawall TW50 zero ODP Yes NoKingspan KoolTherm K8 Cavity Board Yes NoRockwool Cavity Wall Batt Yes NoRockwool High Performance Partial Fill Cavity Slab No YesSpringvale Fulfill Yes NoSpringvale Platinum Wallshield No YesXtratherm Thin-R No Yes

Brickwork Accessories Wall Insulation

Expanded Polystyrene Sheets

Expanded Polystyrene SheetsSlab floor insulation for high floor loadings are likely to be encountered in non-domesticapplications, used with a solid ground floor to satisfy the Building Regulations' U-valuerequirements. The wearing surface may be a concrete slab or a sand/cement screed. Flameretardant additive material is available to order.

Versatile - Adaptable for many applicationsPermanent - 100% rot-proof, effective and durable, ensuring longevity with stable, thermal conductivityEasy to handle - Lightweight and simple to installRapid Construction - Requires no specialist skills or toolsLow thermal transmittance - Satisfies the Building Regulations' U-value requirements

Con

cret

e &

For

mw

ork

Acc

esso

ries

3Concrete Accessories 70Grouts 78Formwork Accessories 82Column Formers 87MBT Couplers 92Slab Accessories 97Curing Compounds 99

Con

cret

e &

For

mw

ork

Acc

esso

ries


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries

Concrete and Formwork accessoriesare a core product range for SupportSite and we have developed anddiversified the range over nearly twentyyears of trading.

We offer an extensive stockholdingof spacers including

• Single, double and triple concretespacers

• Steel High Chairs

• Circular spacers for mesh

• Continuous plastic track spacer forlightweight applications

• Concrete square bar

• All in a full range of sections

Within the range, we provide highquality finish SONOTUBE columnformers which are available ex stock instandard sizes from the larger SupportSite branches.

For permanent shuttering you will finddetails of HY-RIB metal sheeting andsacrificial BEAMFORM sheets, madefrom heavy duty polypropylene, forground beams and pile caps. Thesecan be pre cut to specific beamsections or supplied in full sheets.

Also available:

• Ancon Eazistrip reinforcementcontinuity system (to order)

• Tie bar and accessories

• Frost blankets

• Combiform floor levelling screed railsystem

• Crack inducers and void formers

Products PageConcrete Spacers 70Wire Spacers 71Tying Wire and Tools 72Adjustable Kickers 72Dowel Bar Cradles 73Dowel Bar Accessories 73Plastic Spacers 74Bolt Boxes 77S/B Grouts 78Fabric Reinforcement 80Tie Bar System 81Formwork Accessories 82Tiefill 83Ancon Continuity System 84Sonotube Column Formers 87Hy-rib Permanent Formwork 89Corrugated Beamform 90Combiform 91Ancon 92- MBT Couplers 92- Shear Load Connectors 93- Balcony Connectors 94- Punching Shear 95

ReinforcementPolystyrene Products 95 Lifting Sockets 96Slab Accessories 97Frost Blankets 98Concrete Curing Compounds 99Joint Fillers 100

Concrete And Formwork Accessories

Concrete and Formwork Accessories70

Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Concrete Spacers

Conrete Spacers• Non toxic fibre reinforced spacers.• Natural bond with concrete.• Porosity and surface permeability similar to concrete.• Compressive strength of material generally above 50n/mm2.

Flat Based (Single Cover)Flat Based Single Cover Concrete Spacers. Suitable for heavy duty horizontal applications.

Flat Based (single cover)Cover Pack Size15mm 100020mm 100025mm 50030mm 50035mm 50040mm 25045mm 25050mm 25060mm 25075mm 10080mm 100100mm 100

Flat Based (Double Cover)Flat Based Double Cover Concrete Spacers. Suitable for heavy duty horizontal applications.

Flat Based (double cover)Cover Pack Size25, 30mm 50035, 55mm 20040, 50mm 25060, 75mm 10065, 70mm 100

Arched Based (Double Cover)For minimum contact with formwork. Ideal for vertical reinforcement.

Arched Based (Double Cover)Cover Pack Size15, 20mm 100025, 30mm 50030, 35mm 50030, 40mm 50035, 40mm 25040, 50mm 25045, 55mm 20050, 60mm 20065, 70mm 10075*mm 100*Single cover arched based

Concrete and Formwork Accessories 71


Arched Based (Triple Cover)For minimum contact with formwork. Ideal for vertical reinforcement.

Arched Based (Triple Cover)Cover Pack Size20, 25, 30mm 100035, 40, 50mm 250

Mesh Castle SpacersConcrete castellated spacer, for mesh, with a large base area for use on plastic membranes,sand or hardcore.

Mesh Castle SpacersCover Pack Size20, 25, 30mm 100035, 40, 50mm 250

Square Bar• Large bearing area on square bars mean Support Site bars can be laid onto PVC sheeting,

base material, or blinding, as well as onto formwork.• Can be used to accurately separate shutters in walls and beams.• Bars are also used as kickers in ‘kickerless’ concrete construction.

Circular, triangular and rectangular bars are available to order.

Square BarSize 25, 30, 35, 40, 45, 50, 60, 70, 75, 100mm

Wire Spacers

Continuous Hy-Chairs• Manufactured from hard drawn wire, and available in standard lengths of 2 metres.• Suitable for supporting top reinforcement off polythene membrane

without puncturing.• Can also be used for spacing top and bottom layers of mesh and

dowel bar supports.

Wire SpacersType Height SizeContinuous Hy-Chairs 50, 60, 75, 90, 105, 120, 135, 150, 175, 200, 250, 300mm 50mFlat Top Hy-Chairs 50, 60, 75, 90, 105mm 50m

Circular Mesh Spacers• Specifically designed to support mesh in slabs.• Manufactured from 4mm diameter hard drawn wire.• Supplied to site in flat strips, 3 metres long.• Can be quickly formed into a circle to ensure correct positioning of mesh in slabs.

Allow four or five circular mesh spacers per sheet of mesh.

Circular Mesh SpacersHeight Pack Size50, 60, 75, 90, 100, 120, 135, 150, 175, 200mm 25

Flat Top Hy-chairs• Flat top version of A type continuous hy-chairs.

72

Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Concrete and Formwork Accessories

Tying Wire Black AnnealedThis tying wire is a quality wire, soft annealed to very high standards.

Tying Wire Stainless Steel Stainless steel tying wire is used where there is danger of wire cuts being left on the formworkand causing staining to the surface of the concrete, also for the fixing of stainless steelreinforcing bar.

Wire Snips

Wire Snips

Double Loop Ties & Tying Tool

Double Loop Ties & Tying ToolSize 100, 150, 200, 250mmTying Tool

Tying Wire and Tools

Adjustable Kickers

Adjustable KickersRemoves the need to pour a kicker. The fixing is placed in the fresh concrete and is adjustedto give the correct position for shutters.Other lengths of threaded bar available on request.

Adjustable KickersWall Width150 Single175 Single200 Double225 Double250 Double

Double Single



Dowel & Tie BarsFor use in expansion and contraction joints. Bars are supplied with clean sawn cut ends.Stainless steel dowel bars are available to order.

Dowel & Tie BarsDiameter Size 12mm 400, 600, 900mm16mm 400, 600, 900mm20mm 500, 600mm25mm 500, 600mm

Dowel Sleeves and Foam PlugsA range of dowel bar debonding sleeves, manufactured from rigid PVC tube. Foam Plugs aremanufactured from closed cell polyethylene

Dowel Sleeves and Foam PlugsDiameter x Length Sleeve/Plug Pack Size12 x 450mm 25016 x 200mm 25020 x 300mm 25025 x 300mm 25032 x 375mm 250

Dowel Bar CradlesDowel Bar Cradles are used to support dowel bars in contraction and expansion joints. When ordering please confirm type, height (which is from base of cage to bottom of dowelbar) and quantity required.

Manufactured to customer requirements.

Concrete Accessories

Dowel Bar CapsA range of dowel bar debonding caps, manufactured from rigid PVC tube with a compressiblefiller inserted in one end to allow for expansion.

Dowel Bar CapsDiameter x Length Pack Size12 x 125mm 25016 x 125mm 25020 x 125mm 25025 x 125mm 25032 x 125mm 250


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Bar Bond Breaking CompoundDipped or brush applied.

Bar Bond Breaking CompoundSize 5, 25 litres

Adjustable Screed Chairs MetalFor accurate floor or slab thickness it is essential to start with a rugged dependable supportthat is easily adjustable and will maintain the required height. The metal screed chair isadjusted in height by turning the stirrup in the base. Stirrups and bases can be supplied asseparate items.

Adjustable Screed Chairs MetalType Adjustment Slab depth min/max StandardSTA/1 30mm 120-150mmSTA/2 50mm 150-200mmSTA/3 100mm 200-300mmHeavy dutyHDA/4 30mm 300-380mmHDA/5 80mm 380-460mmHDA/6 80mm 460-540mm

Adjustable Screed Chairs PlasticThese are designed to take a 50mm screeding bar. The plastic chairs are supplied in 4separate parts, 3 of which can be removed from the wet concrete or screed for re-use.

Adjustable Screed Chairs PlasticSection Pack SizeA. Saddle 250B. Collar 250C. Shaft 100/mD. Base 250

Continuous Plastic Spacer - Tric TracContinuous plastic spacers are for supporting bottom reinforcement in suspended slabs. Theyprovide good stability and excellent concrete flow characteristics.

Continuous Plastic SpacerCover Size 15, 20, 25, 30, 35, 40, 50mm 100m

Plastic Spacers

Screed BarsUsed when screeding to provide greater accuracy in concreting levels.

Steel Screed BarsSize 25mm x 50mm x 7.5m



Grade Plate Spacers - Support FixGrade Plate Spacers are a double cover spacer that has been designed for use in ground floorslabs. Where its large base area prevents puncturing of polyethylene film and gives a stablesupport to the reducing steel. Often used with ground beam shuttering.

Grade Plate SpacersCover Pack Size 40/50mm 25055/65mm 20065/75mm 20090/100mm 100

Support ClipSupport Clip is a general purpose clip on spacer used in all types of applications found inprecast yards and on site. It can be fixed horizontally or vertically on bars from 4mm to 16mmdiameter.

Support ClipCover Rebar Diameter Pack Size15mm 4–16mm 200020mm 4–16mm 100025mm 4–16mm 100030mm 4–16mm 100035mm 4–16mm 50040mm 4–16mm 50050mm 4–16mm 500

Plastic Wheel SpacersLight but robust wheel spacer for vertical surfaces used for both site and precastapplication. Ideal for beams and columns.

Plastic Wheel SpacersCover Rebar Diameter Pack Size15mm 4–12mm 200020, 25mm 4–12mm 100025mm 8–20mm 50030mm 4–12mm 50030mm 8–20mm 50040mm 4–12mm 50040mm 8–20mm 25050mm 4–12mm 25050mm 8–20mm 25060mm 8–28mm 100

Plastic Pile Cage SpacersSpecially designed spacers for use in pile cages. Wheel spacers can be threaded onto helicalsbefore cage is inserted. Clip on spacers can be fitted onto helicals or main bars.

Plastic Pile Cage SpacersCover Bar Size Width Pack Size40mm 6–12mm 10mm 50050mm 6–12mm 10mm 25045, 50mm 6–12mm 30mm 25050mm 16–20mm 30mm 20070mm 16–20mm 30mm 10075mm 16–20mm 30mm 100

76

Con

cret

ean

dFo

rmw

ork

Acc

esso

ries



Protection CapsProtection Caps have been developed to protect workers from the seriousinjury that starter bars can cause. Large size suitable for scaffold bars.Available in two sizes 6-18mm and 16-32mm.

Protection CapsType Bar Size Starter Bar Cap 6–18mmStarter Bar Cap 16–32mmScaffold Pole Cap 25–50mm

Plastic ShimsPlastic shims ideal for packing during erection of precast concrete units. Horseshoe to fitaround projecting bars.

Plastic ShimsSize Thickness 50 x 60mm 1, 2, 3, 4, 5, 6, 10mm

Plastic Precast ShimsVery hard plastic shims for non-structural, temporary alignment of precastpanels and components. Horseshoe or plain types in a range of thicknessesfrom 2 to 9mm.

Plastic Precast ShimsSize Thickness 70 x 70mm 2, 3, 5, 7, 9mm

Stainless Steel Shims available to order.

Holding Down BoltsA full range of holding down bolts are available. Supplied in mild steel or hightensile. Special sizes made to order.

Holding Down BoltsLength x Diameter20 x 375, 450mm24 x 375, 450, 600mm

Threaded Studding and ScrewsThreaded Studding and Set Screws, available in Self Colour.Galvanised and Stainless Steel in both 304 and 316 grades.

StuddingSizeM12 x 1000M16 x 1000M20 x 1000M24 x 1000

Set ScrewsM6 M8 M10 M12 M16M6 x 20 M8 x 25 M10 x 20 M12 x 25 M16 x 50M6 x 25 M8 x 35 M10 x 25 M12 x 30 M16 x 60M6 x 30 M8 x 45 M10 x 30 M12 x 40 M16 x 70M6 x 40 M8 x 40 M10 x 40 M12 x 45

M10 x 45 M12 x 50M10 x 50



Cardboard Bolt Boxes A waxed cardboard cone which can be cut away when no longer required.

Cardboard Bolt Boxes Length 229mm305mm385mm457mm534mm610mm

Expanded Metal Bolt Boxes A cylinder manufactured in various lengths from expanded metal, to be left in the bolt pocketfor use as a key in the concrete.

Expanded Metal Bolt Boxes Diameter x Length75 x 150mm75 x 225mm75 x 300mm100 x 375mm100 x 450mm100 x 600mm

Polystyrene Bolt Boxes An economical and easy method of ensuring bolt location in structural steel stanchions.Polystyrene cones can easily be dispersed when their application is complete.

Polystyrene Bolt BoxesLength 225mm300mm375mm450mm525mm600mm

Polystyrene DissolverPolystyrene dissolver is a specially formulated solvent developed to safely dissolve away andemulsify unwanted polystyrene, bolt boxes or void formers.

Polystyrene Dissolver Size 5 litre

Bolt Boxes


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Grouts Conbextra GP | HF | Lokfix S25 | P25

Cementitious Grouts Conbextra GPGeneral purpose, non-shrink cementitious grouting of gap thicknesses 10 to75mm. Recommended applications at flowable consistency includestanchion base plates, bolt pockets and void filling. At trowellableconsistency it is recommended for bedding load bearing components.

Conbextra HFFree flow, non-shrink, cementitious grouting of gap thicknesses 10 to100mm. Recommended applications include:• Large stanchion baseplates• Joints between pre-cast concrete panels• Pumped grouting applications• Grouting applications where pouring access is restricted

Resin Anchoring GroutLokfix S25 / P25High-strength corrosion-resistant anchoring of bolts and bars into concrete,rock, masonry or brickwork where high speed of installation and early application of load isrequired Permanent installation of reinforcement starter bars, MOT bolts, foundation bolts,base plates, balustrading, barriers and safety fences, railway tracks and tie-back anchors.

Lokfix S25 (pourable grade, 25 minute gel at 20°C):For use where the hole is 8 to 40 mm greater in diameter than the bar.

Lokfix P25 (pumpable grade, 25 minute gel at 20°C):Used in overhead or horizontal holes where the hole is up to 25 mm greater in diameter thanthe bar. The thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.

GroutsType Size YieldConbextra GP 25kg bag Trowellable: 12 litresConbextra HF 25kg bag Flowable: 13.25 litresLokfix S25 2.5 litre pack resin & hardener 2.5 litresLokfix P25 2.5 litre pack resin & hardener 2.5 litres

Lokfix usage guideHole Dia 12mm 16mm 20mm 25mm 32mm 38mm 44.5mm 51mm20mm 0.020 litre - - - - - - -25mm 0.038 litre 0.029 litre - - - - - -32mm 0.069 litre 0.060 litre 0.049 litre 0.031 litre - - - -38mm - 0.093 litre 0.082 litre 0.064 litre - - - -45mm - - 0.128 litre 0.110 litre 0.079 litre 0.046 litre - -51mm - - - 0.155 litre 0.124 litre 0.091 litre - -57mm - - - 0.206 litre 0.175 litre 0.142 litre 0.100 litre -64mm - - - 0.273 litre 0.241 litre 0.208 litre 0.166 litre 0.117 litre76mm - - - - - 0.340 litre 0.298 litre 0.249 litre

Fosroc Lokfix usage guideTo determine the quantity of material per 100mm of hole depth



Five Star Grout SPFive Star Grout SP is a special performance, higher flow version of the standard grout. It canbe applied in thicknesses from 10 to 50mm. It has superior properties and complies with HASpec 2601.4 for use in bridge bearings.

weber.cem grout (construction grout)weber.cem grout is a premixed non-shrink cementitious grout developed for applicationswhere an effective grout with adequate flow and strength is required. It is designed primarilyas a pourable grout but can also be used at a plastic or dry pack consistency. This grout can be pumped or poured and can be applied in thicknesses ranging from 10mm to100mm. It can be used for many general purposes.

GroutsType Size Yield / CoverageFive Star 25kg 14 litres at pourable consistencyFive Star SP 25kg 14 litres at pourable consistencyweber.cem grout 25kg 14 litres at pourable consistency

Sika Grout 212High strength pre-packed non shrink cementitious grout. For groutingbolts, fittings, anchor bolts, machine beds, chain bolts, columns, bridgebearings, holes, cavities, etc.

GroutsType Size Yield / CoverageSika Grout 212 25kg 14 litres at pourable consistency

Cementitious Grouts Fivestar | SP | weber.cem grout | Sika Grout 212

Cementitious GroutsFive Star GroutA range of premixed cementitious grouts developed for applications where an economicalgrout with good flow and strength is required. Five Star Grouts are based on specially selectedPortland cements, graded aggregates and admixtures including a special form of carbon.This special formulation produces grouts which conform to ASTM C827 Early Volume Changeof Cementitious Mixtures. Does not contain iron, aluminium or other additives whicheliminates any subsequent problems of dimensional instability, corrosion or staining. Five Star Grout is designed primarily as a flowing grout but can also be used at a trowellableor dry pack consistency. It can be applied in thicknesses from 10 to 100mm.

Uses:• Under stanchion plates and machinery (static loads only).• Grouting bearings, precast units, floors etc.• Fixing anchor bolts, ballustrades, crash barriers, starter bars.• Underpinning.• Void filling.


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Fabric Reinforcement

Support Site Fabric ReinforcementWhen ordering non-standard sheets, the main wire length should be the first dimensionstated. Standard sheets are 4.8m x 2.4m.

Support Site Fabric ReinforcementType BS Ref Mesh Wire sizes Cross Nominal Sheets Mesh sizes Nominal sectional weight perFabric pitch of wires area per m2 tonne

metre width (approx) Main Cross Main Cross Main Crossmm mm mm mm mm2 mm2 Kg

Square *A142 200 200 6 6 142 142 2.22 40A98 200 200 5 5 98 98 1.54 57

Structural B1131 100 200 12 8 1131 252 10.90 8B785 100 200 10 8 785 252 8.14 11B503 100 200 8 8 503 252 5.93 15B385 100 200 7 7 385 193 4.53 20B283 100 200 6 7 283 193 3.73 24B196 100 200 5 7 196 193 3.05 29

Long C785 100 400 10 6 785 70.8 6.72 13C503 100 400 8 5 503 49.0 4.34 20C385 100 400 7 5 385 49.0 3.41 26C283 100 400 6 5 283 49.0 2.61 34C636 100 400 9 6 636 70.8 5.55 16

Wrapping D98 200 200 5 5 98.0 98.0 1.54 57Fabric

D49 100 100 2.5 2.5 49.1 49.1 .77 113*A142 also available 3.6m x 2.0m sheets, 50 sheets per bundle – merchant size sheets

Anchoring Grout Resinex Injection System

Anchoring GroutResinex Injection SystemThe resin injection system has been specifically developedto enable the bonding of awkward materials. The coaxialcartridge keeps the resin and aggregate separate from thecatalyst until they are dispensed through the static mixerdirectly into the hole.The resin/aggregate specifications have been chosen togive good pumpability on installation with high tensile strength when set.

Cure TimesTemp Gel Time Time before loading5°C 40 mins 240 mins10°C 20 mins 180 mins20°C 7 mins 120 mins30°C 5 mins 60 mins

Chemical Injection SystemType Volume QuantityCartridge Polyester 400 ml 1Nozzles Std. 1Dispensing Gun 1




Tie Bar System

Tie Bar SystemTie bar is produced from high tensile steelwith a screw thread (deformation conformingto ASTMA 618 for reinforcing steel bars).

Tie Bar SystemLength Diameters6m 15, 20, 26.5mm

Wing NutHigh quality malleable cast.

Wing NutQuantity1

Waler PlateHeavy duty washer plate 125 x 125 x 12mm.

Waler PlateSize125 x 125 x 12mm

Hex NutThreaded hexagonal nut.

Hex NutQuantity1

Extra Long ConnectorWith centre pin.

Extra Long ConnectorQuantity1

Water Barrier ConnectorCast waterstop tie connector.

Water Barrier ConnectorQuantity1

Thruty ConesThruty cones are used at the ends of the thruty sleeve and can be easily extracted afterremoval of the formwork, to form a chamfered recess for subsequent grouting.

Thruty ConesSize (outside diameter)20mm22mm26mm30mm

Plastic StoppersUsed with plastic sleeve/tube to form a watertight seal. For tube internal diameters 20-32mm.

Plastic StoppersSize (inside diameter)20mm22mm26mm32mm

Thruty SleeveThruty sleeve is a rigid PVC tube of 2mm wall thickness, supplied in 2 metre lengths whichcan easily be cut to the required size. It is used as an expendable sleeve over tie bolts,facilitating their removal and also acting as a spacer to ensure correct width of wall.

Thruty SleeveSize id/od 20/24mm22/26mm26/30mm32/38mm


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries



AdofillTwo part formwork filler paste

AdofillType Size Grey 2, 8kgExtra hardener tube

AdosealPolyurethane formwork sealer.

Adoseal Size 1, 5, 25 litres

Formwork Accessories

AdostrikeConcrete Mould Oil.

AdostrikeSize 5, 25, 210 litres

AdoleaseConcrete chemical release agent.

AdoleaseSize 5, 25, 210 litres

Adotard (Top Face)Concrete surface retarder.

Adotard TFSize 5, 25, 210 litres

AdofoamFormwork joint sealing strip.

AdofoamSize Roll Size 12 x 6mm 12m25 x 12mm 12m

Adotard (Mould Face) Water BasedConcrete surface retarder.

Adotard MF WBSize 5, 25 litres

Adotard (Mould Face)Concrete surface retarder.

Adotard MFSize 5, 25 litres

FoambondFoambond expanding foam system fulfilsthe requirements of both fixing andinsulation within a variety ofapplications.

FoambondSize750ml

Foambond GunsPlastic and Metal.

Foambond GunsTypePlasticMetal



PVC Groutcheck TapeA special developed matt finish waterproof pressure-adhesive PVC tape, for use on all types ofconcrete formwork in climate conditions ranging from cold to tropical. It has excellentadhesion even where residual release agent is present on form face, retains flexibility at lowtemperatures and thinner so as to not mark concrete.

Groutcheck TapeRoll Size Pack Size33m x 50mm 5433m x 75mm 3633m x 100mm 27

Tiefill Coverage Tables

She Bolt TypeNumber of holes

Tie Rod Cover She Bolt Size Tie Rod Sizes 8kg pack 25kg pack 6:1 Scoop4 litres 12.9 litres Mix 285cc

38mm 11⁄4” 3⁄4” 88 275 613⁄4” 5⁄8” 144 453 103⁄4” 1⁄2” 247 777 17

50mm 11⁄4” 3⁄4” 72 226 513⁄4” 5⁄8” 117 368 83⁄4” 1⁄2” 200 629 14

Through Tie TypeNumber of holes

Depth of fill Diameter of hole 8kg pack 25kg pack 6:1 Scoop4 litres 12.9 litres Mix 285cc

30mm 26mm 229 738 16*

Tiefill

TiefillFor the filling of tie-holes formed by formwork bolts in new construction, particularly where arapid setting, durable, waterproof mortar is required.Tiefill is a single component, polymer modified, fibre reinforced, Portland Cement based repaircompound, which exhibits unique hydraulic properties to produce a rapid curing mortar withenhanced polymer properties.It only requires the addition of clean water to give a rapid setting, yet durable high strengthmortar and is ideally suited for the filling of voids particularly in new construction which needto be rapidly put into service, such as tie-holes, grout holes and voids around fixings.For the treatment of tie-holes formed bythrough-ties, any remaining plastic tubeshould be cut back and removed toapproximately 40-50mm from the concreteface. To eliminate the possibility of watertracking around the plastic tube, it should beplugged with cork or a proprietary stopper.Tiefill is a WRAS approved product and istherefore suitable for use in contact withpotable water.

These figures assume holes are filled to concrete wall faces and allow for 10% wastage.


Con

cret

ean

dFo

rmw

ork

Acc

esso

ries


Continuity System

Eazistrip Continuity SystemEazistrip Reinforcement Continuity Systems are designed to maintain continuity ofreinforcement at construction joints in concrete. Formwork design is simplified and there is noneed to drill shuttering. Each unit consists of a galvanised steel casing which is dimpled toprovide an effective concrete bond. Pre-bent bars are housed within the box and are securedby a protective cover. When the cover is removed the bars can be straightened ready forlapping onto the main reinforcement. Bars must be straightened only once, using an Eazistripre-bending tool.When the potential for water ingress through the construction joint is a major concern,Eazistrip can be supplied with a Pentaflex hydrostatic seal which provides protection againstmoisture permeation along the joint face.Eazistrip Reinforcement Continuity systems are manufactured using CARES approved barwhich meets the requirements of BS4449. The grade of reinforcing bar used is Grade 500B,minimum yield 500N/mm2, minimum uniform elongation Agt 5%. The bars are bent inaccordance with BS8666.

Standard Range SpecificationsThe following tables give details of the Eazistrip standard ranges. Many customers requirepurpose-made units to suit their particular application. In order to meet this requirementAncon will manufacture according to your specific bar arrangement. The most commonshapes are shown below. For further details please contact Ancon Building Products.

Notes1. Dimensions shown in the above table are nominal.

Heights and lengths may typically vary by one bardiameter.

2. On 16mm diameter Type U boxes, the stirrup maybe achieved by using two shape code 21 bars.These are referenced DH.

3. Boxes containing 16mm bars are nominally 40 -50mm deep.

4. Maximum box length is 3m dependant uponweight.

h l h l

b

h l

b

h l

b

h l h l

b

h l

b

h l

b

h l

b

b c

h l

b

c

b

h l

b

b c

Type H Hook(60mm and 80mm box)

Type RU U Bar Type U U Bar

Type S Straight Bar

Type SH Angle with legin horizontal plane

Type RA Angle

Type RA1 Double Angle



Type S2 DoubleStraight Bar

Type 2H Double Hook(not available in 60mm and80mm box)



Reinforcement Continuity Systems Enquiry Form

Please photocopy this page and use it to detail your enquiry/order, please fax to yourlocal branch.

Item Quantity Box Bar dia Stirrup Stirrup Box Stirrup Stirrup Anchoring Stirrupwidth1 10, 12, spacing2 type length3 width4 height length width5

mm 16 mm mm (see mm b mm h mm l mm c mmillus.)

Re-bendingtool

Date: Order [tick box] ■ Enquiry [tick box]■Company:Address:Town:Post Code:Contact: Tel: Fax:

Delivery date:Delivery addressTown:Postcode:Contact: Tel: Fax:Project:

1 Standard box widths 60, 80, 110, 140, 160, 190 and 240mm.2 Variable stirrup spacing available. Standard spacing 150 and 200mm.3 Box lengths up to 3000mm available in certain sizes dependent upon weight. Standard

length 1250mm.4 Stirrup width b is 20mm less than box width as standard. Special spacing for all types

available on request.5 For types RA1, RA2 and RA3, please state dimension c.

Note: Bars must be straightened using an Eazistrip re-bending tool. Do not straighten bars more than once.


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Eazistrip Range Sizes:

Part No. Box Box Length Rebar Centres Stirrup Stirrup Width Leg Bars/BoxWidth mm mm Dia mm mm Height mm mm Length mm

EZ 60H 10/150 60 1200 10 150 170 60 410 8EZ 60H 10/200 60 1200 10 200 170 60 410 6EZ 80H 10/150 80 1200 10 150 170 60 410 8EZ 80H 10/200 80 1200 10 200 170 60 410 6EZ 80H 12/150 80 1200 12 150 170 80 500 8EZ 80H 12/200 80 1200 12 200 170 80 500 6EZ 110H 16/150 110 1200 16 150 155 96 575 8EZ 110H 16/200 110 1200 16 200 155 96 575 6EZ 110U 10/150 110 1200 10 150 170 90 410 8EZ 110U 10/200 110 1200 10 200 170 90 410 6EZ 110U 12/150 110 1200 12 150 155 90 340 8EZ 110U 12/200 110 1200 12 200 170 90 500 6EZ 140U 10/150 140 1200 10 150 170 120 410 8EZ 140U 10/200 140 1200 10 200 170 120 410 6EZ 140U 12/150 140 1200 12 150 170 120 500 8EZ 140U 12/200 140 1200 12 200 170 120 500 6EZ 160U 10/150 160 1200 10 150 170 140 410 8EZ 160U 10/200 160 1200 10 200 170 140 410 6EZ 160U 12/150 160 1200 12 150 170 140 500 8EZ 160U 12/200 160 1200 12 200 170 140 500 6EZ 160DH 16/150 160 1200 16 150 160 140 410 8EZ 160DH 16/200 160 1200 16 200 160 140 410 6EZ 190U 10/150 190 1200 10 150 170 170 410 8EZ 190U 10/200 190 1200 10 200 170 170 410 6EZ 190U 12/150 190 1200 12 150 170 170 500 8EZ 190U 12/200 190 1200 12 200 170 170 500 6EZ 190DH 16/150 190 1200 16 150 170 170 650 8EZ 190U 16/200 190 1200 16 200 170 170 650 6EZ 240U 10/150 240 1200 10 150 170 220 410 8EZ 240U 10/200 240 1200 10 200 170 220 410 6EZ 240U 12/150 240 1200 12 150 170 220 500 8EZ 240U 12/200 240 1200 12 200 170 220 500 6EZ 240U 16/150 240 1200 16 150 170 220 650 8EZ 240U 16/200 240 1200 16 200 170 220 650 6



Sonotube® Sonotube (spiral) | Sonotube Plus® (lined) | Sonotube PremiumTM

Sonotube Polygonal®

Sonotube® Round Concrete FormsSonotube column formers are more than just paper. These forms stand strong as the mostcost-effective way to create round columns. For more than 35 years, the Sonotube brand namehas been the concrete forming tube of choice for construction sites. Now featuring RainGuardtechnology, the forms are light-weight, easy to set and strip, even in the wet.

At Support Site we are the leading distributor of Sonotube column formers in the UK, standardsections are available ex stock at selected branches. Specials are made to order.In addition, Sonotube concrete forms require no cleaning, reassembling or return shipping.

Benefits

• Lightweight and easy to handle

• Easily cut to correct length on site

• Versatile and can be cut, drilled or scoredfor numerous construction applications

• Available in a variety of types and sizes tomeet different forming needs

• Convenient and cost-effective

• Placing, bracing, pouring, stripping andfinishing requires less time and labour

• Skilled labour is not required as withpermanent forms

• Recyclable

• Inexpensive way to form square columns

One-piece forms for a multitude of one-time uses:

• Outdoor sign posts • Light pole bases • Fence post bases • Footings • Stub piers for elevated ramps • Columns for residential, commercial and

other structural buildings • Flag stones and other round steps • Theatrical and movie props • Super-sized shipping/or storage tubes

And, you can set and pour multiple columnsat one time.

Sonotube round column formersSizesDiameter Sonotube weight Concrete volume150mm 0.87kg/m 0.018m2/m200mm 1.16kg/m 0.031m2/m250mm 1.44kg/m 0.049m2/m300mm 2.12kg/m 0.071m2/m350mm 2.47kg/m 0.096m2/m400mm 3.34kg/m 0.126m2/m450mm 3.76kg/m 0.159m2/m500mm 4.82kg/m 0.196m2/m550mm 5.30kg/m 0.238m2/m600mm 6.56kg/m 0.283m2/m650mm 7.10kg/m 0.332m2/m700mm 8.56kg/m 0.385m2/m750mm 9.17kg/m 0.442m2/m800mm 10.82kg/m 0.503m2/m900mm 15.68kg/m 0.636m2/m1000mm 20.02kg/m 0.785m2/m1200mm 25.55kg/m 1.131m2/m

Sonotube® Round Concrete FormsForms are available in lengths up to 12m with diameters ranging from 150 to 1200mm.


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Sonotube® PolygonalTM column formers (square or rectangular)It's okay to be square when you're looking for an inexpensive way to form square columns.Choose Sonotube square/rectangular concrete forms to minimise labour costs and the hasslesassociated with site-built, plastic and metal forms.

Sonotube® Premium™ Concrete FormStop hand-finishing concrete columns forever with Sonotube Finish Free concrete forms. You'llnot only be free from spiral marks, seams and imperfections, but you can save time andmoney through reduced labour.

• Can be supplied with (most cost-effective) or without chamfer

• Looks round, but has a square fiberboard insertlocked inside

• Stands strong against the weight and pressure ofpoured concrete

• Zipper eliminates the need for saws or utility knivesto remove form

• Easy to set up and brace

• Smooth Duraglas® coating delivers flawless column

• Stands strong against the weight and pressure of poured concrete

• RainGuard technology keeps the form strong even in wet weather

• With or without zipper

• Easy to handle, set, strip and discard

• Lengths up to 6m

SizesLengths up to 6m

Most common sizes (mm):

Square: 200x200, 250x250, 300x300, 350x350, 400x400,450x450, 500x500

Rectangle: 200x250, 200x300, 200x350, 200x400, 250x300, 250x350, 300x400Other shapes upon request.

SonaplonEasy bracing system that can be used in combination with push-pull props.



Hy-Rib® Permanent formwork

Hy-Rib® Permanent formwork Expamet Hy-Rib® is an expanded metal sheet product,specifically developed for use as permanent formwork toconcrete. The profile of the open mesh, in combination withthe Hy-Rib tangs, allow the development of dense concretenodules and indents on the face of the Hy-Rib, forming anenhanced mechanical key for the second phase pour. In thecase of visible elements, the resulting Hy-Rib surface issuitable to receive a rendered or tiled finish.

Hy-Rib is primarily used in construction joint applications but it is also used to form wall, beam& column surfaces and slabs soffits, where the formed surface will not be seen.For over 80 years Hy-Rib has been successfully used as permanent formwork on innumerablebuilding & infrastructure projects, throughout the world.

Hy-Rib has an enviable portfolio of technical data. Independent bodies have undertaken fullscale testing programmes to determine and verify Hy-Rib’s effectiveness in formingconstruction joints. The result is a product with well defined engineering properties,established formwork pressure characteristics and measured improvements to the jointperformance. Hy-Rib is certified for use as permanent formwork by the British Board ofAgrément (BBA). See table below;

Hy-Rib Permanent FormworkType Length Width Thickness Weight2811 3m 89, 178, 267, 356, 445mm 0.4mm 3.39kg/m2

2611 3m 89, 178, 267, 356, 445mm 0.5mm 4.23kg/m2

2411 3m 89, 178, 267, 356, 445mm 0.75mm 6.34kg/m2

Stainless Steel Hy-Rib is also available to order in the following lengths; 2, 4, 5m.

Reasons to use EXPAMET HY-RIB®

• Reduced risk of Hand & Arm vibration injury (white finger): product featured in HSEdocument - Vibration Solutions Ref HS (G) 170.

• When Hy-Rib is used as vertical formwork, the resulting formwork pressure is significantlyless than that developed with traditional forming materials, reducing the overall supportrequirement.

• Expamet Hy-Rib joint surfaces require minimal preparation prior to the next pour, with theexception of the rebar cover zones. It minimises the labour, mess and disposal requirementsassociated with scabbling, chemical retarders and jet washing.

• A correctly formed Hy-Rib joint outperforms traditionally prepared joints in shear and bond.• Hy-Rib reduces the risk of trapped air and voids within the concrete.• The range of narrower sheet widths improves site productivity and minimises wastage.• Hy-Rib is a proven construction product with comprehensive technical data, manufactured

by an established UK company.• In all joint applications, Hy-Rib permanent formwork can give considerable performance and

economic benefit when compared with traditional solutions.

Typical Applications

• Construction joint stopends in thin & thickbase and suspended slabs

• Vertical construction joint stopends in thinand thick walls

• Deep construction joints• Capping beams• Permanent wall and column formwork• Permanent Soffit Formwork

• Industrial floor slabs• Water retaining & excluding structures• Bolt boxes / Void formers• Curved formwork• Day work joints• Baffles to self compacting concrete• Inclined & top formwork• Sprayed concrete background


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Corrugated Beamform

Corrugated BeamformProvides the contractor with a rapid and cost effective method of constructing on-site concreteground beams and pile caps. Manufactured from a heavy duty polypropylene in 8mmthickness, the system has many advantages over traditional timber or steel pan construction.These include the following benefits:

Advantages• Can be bent to form any ground beam detail

• Requires less excavation than traditional shuttering

• Light yet rigid, so easily handled

• Can arrive on site tailor-made ready for installation

• Supplied and delivered flat pack so requires minimal storagespace

• Reduces over dig and spoil cartage

• Easily installed using a sharp knife and assembled by unskilled labour

• Can be cut to exact dimensions to ensure that perfect cover is maintained

• Minimises concrete wastage

• No shutter stripping, cleaning or release agents are needed

• Easily adapted to suit variations on site, such as pipes, cables and other services

Permanent Formwork System is supplied in 3 main forms:

• Standard 4.88m x 2.44m sheets which are cut and scored on site by contractor

• Supplied in cut strips, when using sides only

• Pre-fabricated into U-sections in the factory, to suit individual site requirements

Accessories

SpacersCareful consideration should be given to the type of spacing system used and therecommended spacings to maintain the effectiveness of the overall system.

Plastic grade plate spacerWith the ability to grip 6 to 16mm diameter bars without the need for tying. Two sizes areavailable; 40/50mm cover and 65/75mm cover. Recommended spacings of 8 per square metre.

Track spacersManufactured from heavy duty plasticsupplied 2 metre lengths. Sizes available;40 and 50mm. Recommended for precisionalignment of beams.

Concrete square barManufactured to a high standard andcomes in 1 metre lengths, 40 or 50mmhigh. Recommended for use in the bottomof heavy beam cages and pile caps with arecommended spacing of 1000mm centres.



CombiForm Screed Rail System

CombiForm Screed Rail System A stay-in-place screed rail system for use whenpouring concrete floors.

Works as: • Form System• Screed Rail• Dowel Bar Holder• Crack Inducer

Typical Applications:• Superflat floors• Ground bearing slabs• External slabs• Suspended ground slabs• Upper storey slabs• Metal deck and composite floors• High output applications or continuous pours

Benefits:• Continuous Pouring – no breaking of forms –

faster and more efficient pouring• “Built in” Construction Joint• Level dowel bar positions for better shear resistant• Light weight for ease of use

Slab Thicknesses:• Slabs up to 225mm require standard rails• Thicker slabs can be accommodated by using

screws and rail supports, contact us for details

Sizes:Combiform is available in sizes from 25mm to145mm which covers up to 225mm thick slabs.Thicker slabs can be accommodated byaccessories.All Rails are 2.2 metres long.The Combiform screws are available in 25, 60 and90mm lengths.

The Combiform Top Extender should be used forextra cover of concrete on all heavy duty floors forexample external yards. The Top Extender can beremoved after 28 days if caulking is required.

Combiform Screed Rail SystemWeight (Bundle)

Type Height H-1 H-2 H-3 Width 1m 3.5m 35mC25 25mm - - - 80mm 0.72kg 2.5kg 25kgC45 43mm 30mm - - 90mm 0.77kg 2.7kg 27kgC65 65mm 28mm 47mm - 105mm 1kg 3.5kg 35kgC85 85mm 31mm 49mm 67mm 115mm 1.13kg 4kg 40kgC105 105mm 32mm 53mm 88mm 130mm 1.4kg 4.9kg 49kgC125 125mm 32mm 64mm 109mm 135mm 1.7kg 6kg 60kgC145 145mm 32mm 75mm 127mm 160mm 2.2kg 7.7kg 77kg


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


MBT Couplers ET | Transition & Continuity Series | MBT Headed Anchors

MBT CouplersThe MBT range of couplers provides a cost-effective method of joining reinforcing bars,particularly when the fixed bar is already in place and there is insufficient space for ahydraulic swaging press. They are easy to install and achieve failure loads higher than 115% ofthe characteristic yield strength of grade 500 reinforcing bar. Neither bar end preparation toform threads, nor bar rotation are required. MBT couplers can also be used to join imperial,plain round or deformed reinforcing bars.

When the pre-determined tightening torque for the bolts is reached, the heads shear offleaving the top of the installed bolt slightly proud of the coupler. This provides an instant visualcheck of correct installation.

ET SeriesET series couplers are used to connect reinforcing bars of thesame diameter. They can be used when neither bar can berotated and are available in sizes 10mm to 40mm.

Transition SeriesMBT Transition couplers connect reinforcing bars of differentdiameters and are suitable for applications when neither bar canbe rotated. They are available to suit bar sizes 12mm to 40mm.

MBT CouplersET Series Bar Diameter ET10 10mmET12 12mmET14 14mmET16 16mmET20 20mmET25 25mmET28 28mmET32 32mmET34 34mmET40 40mmSizes: To join bars of a similar size from 10 – 40mmdiameter

MBT CouplersTransition Series Bar Diameter ET20/12 20/12mmET20/16 20/16mmET25/16 25/16mmET25/20 25/20mmET32/20 32/20mmET32/25 32/25mmET40/32 40/32mm

Continuity SeriesThe MBT Continuity coupler allows reinforcement to be extended at construction joints inconcrete without the need to drill or otherwise damage the formwork at the construction jointlocations. They are available to suit bar sizes 12mm to 40mm.

MBT CouplersContinuity Series Bar Diameter C12 12mmC16 16mmC20 20mmC25 25mmC32 32mmC40 40mm



MBT Headed Anchors MBT Headed Anchors are designed to provide dead end embedment for bars in concrete. Thishelps to reduce congestion and simplify the placement of rebars by removing the need forhooked ends. The anchor comprises half an MBT coupler with a plate welded to one endwhich carries the full tension load of the bar when it is bearing against the concrete. The MBTHeaded Anchor also has the added advantage of requiring no special bar end preparation.

MBT CouplersMBT Headed Anchors Bar Diameter ETHA10 10mmETHA12 12mmETHA14 14mmETHA16 16mmETHA20 20mmETHA25 25mmETHA28 28mmETHA32 32mmETHA34 34mmETHA40 40mm

Shear Load Connectors DSD | DSDQ | ESD | ESDQ

Shear Load ConnectorsAncon shear connectors offer significant advantages over conventional single dowels. The twopart construction means that the sleeve component can be simply nailed to the formwork,drilling or either formwork or concrete is not required. The dowel unit can then be insertedinto the sleeve. The engineered nature of the two components ensures alignment, vital wheremovement is required.

DSDThe DSD is the original two-part, double dowel, shear loadconnector. The dowel component can move longitudinally withinthe sleeve to accommodate movement.

DSDQThe DSDQ shear load connector uses the same dowelcomponent as the DSD, but the cylindrical sleeve is containedwithin a rectangular box section to allow lateral movement inaddition to the longitudinal movement.

ESDThis single dowel shear connector is available in three sizes witheach size available in two lengths. ESD shear connectors areused where the slab or wall is too thin for DSD, and where loadsare small.

ESDQThe ESDQ shear load connector uses the same dowel as theESD, but the cylindrical sleeve is contained within a rectangularbox section to allow lateral movement in addition to longitudinalmovement.


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Insulated and Reinforced Balcony Connectors MV System | V System

Ancon IsolanThe Ancon Isolan system joins external concrete balconies to internal floor slabs. It providescontinuity to both the concrete reinforcement and the thermal insulation of the wall protectingthe building against the effects of cold bridging.Standard systems, comprising rigid CFC-free polystyrene insulation and stainless steel shearreinforcement, are available in five heights to suit different slab depths. Conventionalreinforcing bars (supplied by others) provide the tension and compression reinforcement.

System BenefitsAncon Isolan connectors use conventional reinforcing bars (grade 500B to BS4449: 2005) toprovide the tension and compression reinforcement. When compared to systems where thisreinforcement is an integral component, the Ancon Isolan solution can provide substantial costsavings and simplify specification, scheduling, transportation, handling and installation.

MV SystemThe Ancon Isolan MV system is used forthe transfer of moment and shear forcesin cantilevered balconies.

V SystemThe Ancon Isolan V system is used forthe transfer of shear forces in simplysupported balconies.

Ancon IsolanProduct Insulation Unit Shear Bars Supplied Length of Other ReinforcementCode Dimensions Shear Bars Required2MV6 2 x 6mm diameter 530mm 4 x Tension Bars

4 x Compression Bars4MV6 Height: 4 x 6mm diameter

5 x Tension Bars4MV8 160, 180, 4 x 8mm diameter 670mm

5 x Compression Bars4MV10 200, 220 4 x 10mm diameter 810mm2V6 or 240mm 2 x 6mm diameter 530mm 4 x Compression Bars4V6 4 x 6mm diameter4V8 Length: 750mm 4 x 8mm diameter 670mm 5 x Compression Bars4V10 4 x 10mm diameter 810mm

Design InformationDesign graphs, provided in Ancon’s technical literature, are used to select the most appropriateIsolan element, and the diameters of the shear, tension and compression reinforcement.

Example Isolan Reference:

4MV8 - 200 - 5∅12T / 5∅16C

Number of shearbars. System

type. Diameter ofshear bars

Systemheight

Number and diameter of tensionbars to be supplied

by others

Number and diameterof compression bars

to be supplied by others



Polystyrene Sheets Expanded Polystyrene Sheets | Adhesive | Void Formers

Polystyrene Sheets

Expanded Polystyrene SheetsSize Thickness 2.44 x 1.22m 25, 50, 75, 100, 150mmOther sizes available on request

Polystyrene Adhesive High quality adhesive for bonding filler boards, polystyrene, insulation and protection boardsto a wide range of surfaces.

Polystyrene Void FormersPolystyrene Void Formers utilise the low weight/high strength characteristics of expandedpolystyrene to provide the designer and contractor with a cost effective method of reducingthe deadweight of a variety of structures:

• Motorway bridges• Basement slabs

The void formers are either cylindrical, generally moulded or profiled and cut from expandedpolystyrene block. The moulded cylinders are available in diameters ranging from 250 to1050mm and the standard length is 2.4m. By glueing and cutting the profiles can bemanufactured to suit engineers’ requirements.

Polystyrene Adhesive Size310ml tube

• Pre-cast beams• Water treatment works

Punching Shear Reinforcement

Ancon ShearfixAncon Shearfix is used within a slab to provide additional reinforcement around a columnhead or base. The system comprises double-headed studs welded to flat rails.

Studs are manufactured from high strength steel bar in six diameters and in lengths to suit thedepth of slab. Shearfix rails are manufactured from strips of steel, 16mm wide.

The quantity of studs and rails, their dimensions and spacings, and the layout pattern aroundthe column is determined by calculation.

ShearfixType Stud DiameterAS10 10mmAS12 12mmAS14 14mmAS16 16mmAS20 20mmAS24 24mm

Product ReferenceQuantity of Rails. Shearfix Code, Stud Diameter - Number of Studs - Stud Length - Rail Length e.g. 5 No. AS12 - 3 - 230 – 600


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Lifting InsertsLifting inserts provide a simple and cost effective fixing in concrete. Supplied with a flattenedend, cross drilled to accept a reinforcing bar or with an integral cross pin.Both types are available in stainless steel and zinc plated.

Lifting LoopsThe reusable lifting loops are formed from wire rope held in an externally threaded ferrule.Each loop is tested to twice its working load. This load is indicated on the collar together withthe test certificate number and the CE mark.

Lifting InsertsA B C D E F G F F

Size S.W.L. Length Outside Size of Thread To centre Rebar Rebar Tail Bending Dia. hole for length of hole Dia. Length Width Radius

rebarM12 5mm 60mm 17mm 10mm 25mm 47mm 8mm 300mm 23mm 60mmM16 10mm 79mm 22mm 13mm 27mm 59mm 10mm 350mm 30mm 70mmM20 12.5mm 99mm 26.9mm 12.2mm 20mm 78mm 12mm 400mm 38mm 80mmM24 18mm 120mm 33.7mm 14.2mm 24mm 92mm 12mm 450mm 43mm 80mmM30 27.5mm 150mm 42mm 15.2mm 30mm 177mm 16mm 600mm 59mm 130mm

Fixing Insert with pin

Fixing Insert with pinA B C D E F F F

Size S.W.L. Length Outside Size of Thread To centre Max Tail CrossDia. hole for Dia. of hole screw Width Pin

rebar lengthM12 5mm 60mm 17mm 7.2mm 12mm 45mm 25mm 12.5mm 50mmM16 7mm 70mm 21mm 9.2mm 16mm 53mm 25mm 12.5mm 60mmM20 13mm 100mm 27mm 12.2mm 20mm 78mm 40mm 16mm 100mmM24 18mm 120mm 34mm 14.2mm 24mm 92mm 50mm 20mm 100mm

Lifting Sockets and Loops

Lifting SocketsPlease call your local branch for loading calculations.

Lifting SocketsA B C D E F

Size S.W.L. Length Outside Size of Thread To centre RebarDia. hole for length of hole Dia.

rebar M12 5 40mm 15mm 8mm 17mm 26mm 6mmM16 10 50mm 21mm 13mm 22mm 34mm 10mmM20 20 64mm 27mm 15mm 27mm 40mm 12mmM24 25 75mm 30mm 18mm 34mm 47mm 12mmM30 40 97mm 39mm 22mm 48mm 65mm 16mmM36 63 111mm 46mm 27mm 55mm 73mm 20mm



Slab Accessories

Bottom ‘Y’ crack InducerSize 40mm75mmSupplied in 5 metre lengths

Bottom ‘Y’ crack Inducer

Angle FormersSize 25mm Flanged former25mm Column formerSupplied in 3 metre lengths

Angle Formers

Two Part crack Inducer/Joint FormerSize 50 x 10mm75 x 10mmSupplied in 5 metre lengths

Two Part crack Inducer/Joint FormerFull range of sealants available, see Sealant section next page

Aluminium ‘T’ BarSize 50mm75mmSupplied in 5 metre lengths

Aluminium ‘T’ BarTo form void for above inducer

Side Slab StripSize 40mm x 5mm x 25mmSelf Adhesive type also available

Side Slab StripNon porous chemically resistant strip for use in longitudinal joints in concrete.


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Frost Blankets

Frost BlanketsApplication: Laying concrete at temperatures below 5ºC generally requires special precautions(such as special concrete additives, heating devices, hot vapour equipment etc.). An easy andinexpensive solution is the use of Frost Blankets. The thermal insulation effect of the FrostBlanket significantly reduces the loss of natural concrete hydration heat and thereby keeps theconcrete warm long enough for a safe curing.

Benefits: Concrete laying in summer and winter season. The combination of their excellentthermal insulation performance, their negligible water absorption and their flexibility makeFrost Blankets from Support Site ideal for improved concrete curing.• negligible water absorption• excellent thermal insulation• excellent chemical resistance• fast laying from the roll

Frost Blankets from Support Site can be directly rolled onto the wet concrete. Wind conditions might necessitate the mats being held in place by suitable loading at the contractor’s discretion. Beware not to walk on the mats during installation and before hardening of the concrete.

Support Site Bubble WrapA versatile bubble film sheeting on a roll. Used for alow cost concrete curing blanket/frost blanket andprotection membrane.Bubble WrapSize 1, 1.5 x 100m

Frost BlanketsSize 1.5 x 100m

HessianHessian Rolls for frost protection andcuring of concrete and brickwork.

Hessian RollsSize 1.37 x 50m

Concrete Sealers Adocure Sealer | PF

Adocure SealerConcrete Curing and SealingA clear acrylic polymer resin solution primarily for application to surfaces of freshly laidconcrete where it has a double function, firstly to form a highly effective curing membrane thatconforms to ASTM. C309, and secondly to act as an in-depth sealer for the hardened concreterendering its surface dustproof and extremely hard wearing. Its secondary function andbenefits are also applicable when the material is applied to existing concrete surfaces.

Benefits:• Cures and seals in one operation saving time and labour.• Ideal for use in fast track construction.• Curing efficiency 75% in accordance with ASTM. C390.• Provides abrasive resistant hard wearing easy-clean surface.• Effective anti-carbonation coating.• Permits bond of most subsequent coatings intended for concrete.

• lightweight, easy to handle and cut• good mechanical resistance• flexible at very low temperatures

Concrete Curing and SealingType Size CoverageAdocure Sealer 25, 210 litres 6m2 per litreAdocure Sealer PF 25, 210 litres 6m2 per litre

Adocure Sealer PFAvailable in PF grade for Power Floated floors.



The moisture retaining properties of the Adocure WW will reduce over the first few weeks afterapplication so that the subsequent application of penetrating treatments will be unaffected.

Adocure WWTFugitive dye is added to Adocure WW to aid visual identification of areas of application.Guarantee: Adomast Building Chemicals Ltd. guarantee that the use of Adocure WW or WWT will not prevent the bond of anyrenders, screeds, plasters, paints, epoxies, adhesives, bituminous compounds or any other coating intended for use with concrete.

Adocure StandardResin based curing compound of 75% efficiency. Solution of inert resins in evaporative solventsfor use in general construction projects. WBS listed for drinking water projects.

Adocure SuperResin based curing compound of 90% efficiency. Complies with Clause 1027 of theDepartment of Transport’s specification for Highway Works similar to Adocure Standard butwith a higher curing efficiency. WBS listed for drinking water projects.

Adocure Super ALAvailable Aluminised for use in strong sunlight conditions and where DTp stipulate aluminisedfor highways, bridges, runways etc.

AdotufConcrete Surface Hardener and Dustproofer

The application of Adotuf to an existing cement-bound floor will significantly improve theproperties of the floor to render dustproof, oil and grease proof, case hardened, resistant todilute acids, more durable longer lasting and easier to clean.

Surface preparation: Cement bound floors must be sound, clean, dry and free from oils,greases, fats etc. New floors require at least 10 days to thoroughly dry out before treatment.

Covering capacity: Depends upon floor but average guide is 8m2 per litre of Adotuf per coatand generally two coats are required for best results.

AdotufSize 5, 25, 210 litres

Concrete Curing Compounds Adocure WW | WWT | Standard | Super

Adocure WWA white, aqueous silicate solution, designed to deposit a layer of firmly bonded, high cohesivestrength, minute crystals within the top surface of the concrete to form an integral membranewhich fills all surface pores and capillaries to reduce moisture evaporation. Coverage 5.5m2 per litre.

Water retention tests on Adocure WW treated cubes and controlcubes stored for 24 hours at 30°C showed the following results.

Adocure WWTreated Control

Water retention 80.4% 54.2%Water retention 78.3% 54.8%Water retention 78.9% 54.4%Avg. water retention 79.2% 54.5%

Concrete Curing CompoundType SizeAdocure WW, WWT, Standard, Super, Super AL 25, 210 litres


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Support Site Joint Fillers

Closed Cell PolyethyleneClosed Cell Expanded polyethylene foam is supplied in sheet or strip form. High performanceexpansion joint fillerboard, for concrete slab construction and brickwork joints, which issupplied with an undercut to the depth of sealant for controlled void formation and easyremoval.

Hydrocell XL

Hydrocell XLHydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used forforming or filling expansion joints between adjacent in-situ or precast components. HydrocellXL provides excellent support backing to elastomeric sealants and is especially recommendedfor use in expansion joints in brickwork and in the construction of water retaining and waterexcluding structures.Hydrocell XL supplied in the following sheet sizes and can be easily cut to the required sizewith a Stanley knife or saw.

Korkpak

KorkpakA vertical sliding settlement joint can be created using two layers of Korkpak, one layersecurely fastened to the adjacent building with a polyethylene interleaf to provide a slip planebetween different structures.

Ancillaries

Neoprene (Solid or Foamed)Full range available in thicknessesfrom 1mm to 100mm. In sheets,rolls, strips and pads.

Closed Cell Polyethylene SheetsSheet size: 1.5m x 2.2m = 3.3m2

1m x 2m = 2m2

Size (thickness)10, 12, 15, 20, 25mm

Closed Cell Polyethylene StripsSupplied in 2.2m stripsWidth Thickness100, 150, 175, 200, 225, 250mm 20, 25mm

Closed Cell Polyethylene RollsSupplied in 10m rollsWidth Thickness100, 150, 175, 200, 225, 250mm 10, 12mm

HydrocellType Size ThicknessHydrocell XL 1m x 2m 10, 15, 20, 25mm

KorkpakType Size ThicknessKorkpak 1m x 2m 10, 13, 19, 25mm

ServitapeType SizeServitape 30mm x 12m roll

Pak AdhesiveType Size CoveragePak Adhesive 5 litres 5m2 per litre, 2.5m2 bonded area

Closed Cell Polyethylene Sheets Closed Cell Polyethylene Strips

Closed Cell Polyethylene Rolls



Bitumen Impregnated BoardsBitumen Impregnated Boards are used as a general purpose expansion joint filler in noncritical joints and brick wall construction.

Bitumen Impregnated Strips

Bitumen Impregnated StripsStandard length 2440mmWidth Thickness100, 150, 175, 200, 250mm 10, 12, 20, 25mmOther widths available on request

Bitumen Impregnated Sheets

Bitumen Impregnated StripsBitumen Impregnated SheetsSheet size: 1.22m x 2.44m = 2.98m2

Size (thickness) 10, 12, 20, 25mm

Resin Bonded CorkCork granules bonded together with synthetic resin. This material contains no bitumen orsimilar compounds and will not contaminate the joint faces.Resin bonded cork filler is recommended as a joint filler for expansion joints in reinforcedconcrete water retaining structures, i.e. Sewage treatment works, swimming pools, sea wallsand similar structures.

Resin Bonded Cork SheetsSheet size: .61m x .915mm = 0.558m2

Size (thickness) 12, 20, 25mmTechnical details available on request

Support Site Contact AdhesiveHigh quality adhesive for bonding filler boards, polystyrene, insulation and protection boardsto a wide range of surfaces. 5 litre cans.

Contact AdhesiveSize5 litre

Slip MembraneHeavy Duty Slip Membrane comprises of a tough, dense sheet of specially formulatedpolyethylene having a very low friction surface.

Uses: Heavy Duty Slip Membrane is designed for use in sliding joints in reinforced concretestructures where load bearing characteristics are present, and low friction resistance isrequired. The strip is used in two layers to form a load bearing, low friction sliding joint.

Slip MembraneSize Roll Size 150mm 25mm300mm 25mm


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Thioflex 600Multi-component polysulphide sealant available in two grades; Gun Grade, produced in arange of colours for application in both vertical and horizontal situations. Pouring Grade, onlyin grey for joints in floors or other horizontal surfaces.

Joints which are expected to experience cyclic movements should be designed to an optimumwidth:depth ratio of 2:1, subject to the overriding recommended minimum sealant depths setout below: • 5mm for metals, glass and other non-porous surfaces;• 10mm for all porous surfaces;• 20mm for trafficked joints and those subject to hydrostatic pressures.The use of a primer is always required on porous surfaces.

Sealant Type SizeThioflex 600 gun grade 2.5 litre tinThioflex 600 pouring grade 5 litre tinPrimer 7* 500ml, 5 litre tins* 1 litre of Fosroc Primer 7 is sufficient for 30 litres of Thioflex 600

Sealant Sizes Coverage*

Joint size Litre/metre run Metre run per cartridge380ml Cartridges 5 x 5mm 0.025 litre/m 15.2m

10 x 10mm 0.1 litre/m 3.8m15 x 10mm 0.15 litre/m 2.5m15 x 15mm 0.23 litre/m 1.6m20 x 15mm 0.3 litre/m 1.2m20 x 20mm 0.38 litre/m 1m

*These are theoretical yields, no allowance has been made for variation in joint dimensions or wastage.

Thioflex 600 Gun grade | Pouring grade

Thioflex OneThioflex One is a one part polysulphide joint sealant available in a range of colours whichbonds to most building construction materials and on exposure to atmosphere moisture, curesto form a flexible rubber seal.

It is ideal for sealing joints in window and door frame surrounds and as a capping for beadedglazing systems. It can also be used for sealing joints in external walls and cladding.

Colours available: Black, Buff, Mahogany, grey, stone, cement white, white, brick red

AccessoriesFosroc Primer 7 – One part chemically active clear liquid for brush application to concrete,stone, brickwork. Use Primer 7 with Thioflex One for porous surfaces. Fosroc Primer 4 - For use with Thioflex One on non porous surfaces.

Thioflex One

For Tools andAccessories, pleasesee the Accessoriessection

Sealant Estimating GuideTo calculate the number of litres required use the following calculation.

Joint width (mm) x joint depth x joint length (m) = litres required1000



Colpor 200PFCold applied, high performance, pitch free pavement joint sealant, for the sealing andmaintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PFis particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraftfuelling areas, oil terminals, garage forecourts, parking and cargo areas.

AccessoriesFosroc Primer 20 – Concrete joint faces should be primed with Fosroc Primer 20.

High Performance Grout Check SiliconeA Whole range of polyurethanes are readily available.

Colpor 200PF

Silicone Sealant

Sealant Type SizeColpor Cartons of two 5 litre tinsColpor 20 litre units for machine applicationPrimer 20* 500ml tins* 1 litre of Fosroc Primer 20 is sufficient for 25 litres of Colpor 200PF

Gripfill™High Performance, Multi-Purpose, Gap Filling Adhesive

Gripfill™ is a solvent-borne, filled rubber resin adhesive, developed to bond virtually any rigidmaterials together, regardless of the evenness of the surface.

Gripfill

PromasealPromaseal® Intumescent Sealant is a white or grey water based acrylic intumescent sealant. Promaseal® Silicone Sealant is a silicone-based fire protection sealant, available in white,grey or black. Adhesion is excellent to most types of surface. The sealants cure in air to form anonhardening, tack-free seal, preventing the passage of smoke, toxic gases and fire.

AccessoriesPromaseal Fire Barrier, Compound, Pillows, Foam,Expansion Joint Strip, Unicollar and Pipe Wrap.

Promaseal

Gripfill Size350, 310ml cartridges

PromasealType SizesPromaseal Intumescent Sealant 310ml cartridgesPromaseal Silicone Sealant 310ml cartridges

Sealant Size Colours310ml Cartridges White/Clear


Con

cret

e an

d Fo

rmw

ork

Acc

esso

ries


Notes

Con

cret

e R

epai

r M

ater

ials

4Adomast 106Ardex 107Flexcrete 107Fosroc 109Sika 112Weber 114

Con

cret

e R

epai

rM

ater

ials


Con

cret

eR

epai

rM

ater

ialsProducts Page

Adopatch 106Resomast 106

Ardex A45/A46 107

Monolite 107Monomix 107Fastfill 108Monolvel 108851 108

Renderoc 109Paveroc 109 Patchroc 109Nitomortar 110Expocrete 110Nitobond 110Nitoprime 110Nitokit 111Nitofil 111Dekguard 111

Sikadur 31/32 112Sikatop Armatec 110 112Skatop 121/122/122HB 112Sikadur 41/43HB/52/53/53LV 113SikaColor 671W/550W 113Sikagard 680S/675W 113

weber.cem 114weber.tec 115weber.certite 115weber.cote 116

Concrete Repair Materials

Concrete Repair Materials106

Con

cret

eR

epai

rM

ater

ials


Concrete Repair Adopatch

Adopatch Rapid Set Repair CompoundCement based compounds in powder form requiring only the addition of water to produce arapid set compound with good adhesive properties which is ideal for patch repairs toconcrete. Produced in colours grey and white which can be blended to match most shades ofconcrete.

AdopatchColour SizeWhite or Grey 25kgWhite or Grey 16kgWhite or Grey 8kg

Compressive Strengths N/mm2 20°C TempAge 17% Water6 hours 224 hours 1828 days 50Setting time: 40 minutes at 20°C

Coverage: Each 20kg of powder fill 1m2 at a depth of 10mm

Maximum thickness in one layer 25mm

Resin Repair Systems Resomast

Resomast Polyester Resin Range• Set in 20 - 40minutes and are stronger than concrete in one hour• Develop bond strengths in excess of the surface tensile strength of concrete• Waterproof and resistant to a wide range of chemicals• Usable in temperatures below freezing

Resomast MortarA variable consistency mortar with rapid strength development and high ultimate strength.

Resomast MortarSize Coverage6kg 3.1 litres25kg 13 litres

Resomast PuttyA light thixotropic polyester paste, stoppingcompound for shallow cavities.

Resomast PuttySize Coverage3.5kg 2.09 litres18kg 10.7 litres

Resomast ThixobondHeavy bonding polyester resin paste. Bondingbrick slips and heavy tiles. Jointing concretepipe spigots.

Resomast ThixobondSize Coverage5kg 2.8 litres25kg 13.9 litres

Resomast Bedding A flowable polyester resin mortar. Groutingand bedding machine and stanchion baseplates, bearing pads, etc.

Resomast Bedding Size Coverage5kg 2.64 litres25kg 13.24 litres

Coverage: Any 10 litres of material will fill 1m at 10mm thickness.

Concrete Repair Materials 107


Concrete Repair & Protection Monolite | Monomix | Fastfill | Monolevel | 851

MonoliteMonolite is a lightweight, high yield, ultra-high build,shrinkage compensated, polymer modified mortar for therepair, rendering and profiling of concrete, brick or stonesubstrates. Single component cementitious mortar, whichwhen mixed with water results in a rapid hardening mortarwith enhanced polymeric properties.

Its easy high build application in single thicknesses up to100mm makes it an ideal repair mortar for use in allgeneral purpose concrete, stone and brick applicationsparticularly in vertical and overhead situations. Very easy tofinish to a high quality polymer rich surface.

MonomixMulti-purpose, easy to use, low density, high strength,shrinkage compensated, polymer modified mortar for thestructural repair, rendering and profiling of vertical,horizontal and overhead surfaces. Single componentcementitious mortar incorporating the most advancedcement chemistry, microsilica, fibre and styrene acryliccopolymer technology.

The thixotropic nature enables easy high build trowel application for the structural repair ofdefective and removed concrete in single thicknesses up to 80mm. Totally resistant to waterunder 10 bar hydrostatic pressure, it is also suitable for use as a waterproof render in tanksand basements and has DWI Approval for use in contact with drinking water. Compliant withHighways Agency Standard BD27/86.

Concrete Repair & Protection Ardex A45 | Ardex A46

Ardex A45 Internal Repair MortarArdex A 45 is a rapid setting and drying repair mortar. Ideal for internal repair of stair treads,risers and other screed repairs. Hard enough to walk on and receive floorcoverings after 1_hours. Other applications are: forming ramps and falls, making good around fittings/pipework,filling cracks and joints.

Ardex A46 External & Internal Repair MortarARDEX A46 is a rapid setting and hardening, slump free mortar which is ideal for external orinternal repairs. The mortar sets and hardens rapidly to give a repair of exceptional strengthand hardness. The mixed mortar sets after 20 minutes and can be trafficked after only 2-3hours at 20°C. ARDEX A46 is ready to receive floorcoverings that are not sensitive to moisture,such as ceramic tiles after 24 hours at 20°C.

Concrete Repair MortarType Size CoverageArdex A45 5kg tubs, 11kg bags 7 litres per bagArdex A46 11kg, 25kg bags 8 litres per bag


Con

cret

eR

epai

rM

ater

ials


Concrete RepairType Size Yield CoverageMonolite 25kg 23 litres 2.3m2 @10mm thicknessMonomix 25kg 16.5 litres 1.65m2 @ 10mm thicknessFastfill 25kg 13.3 litres 1.33m2 @ 10mm thicknessMonolevel FC 25kg 15 litres 5m2 @ 3mm thicknessMonolevel 844SP 25kg 15 litres 5m2 @ 3mm thicknessMonolevel RM 25kg 14 litres 1.4m2 @ 10mm thickness851 35kg 19.5 litres 9.7m2/35kg at 2mm thickness

All products (except 851) are supplied as a single component system, ready for on-site mixing and use, requiring only the addition of clean water. Packs can be split for economic use (not 851).

FastfillFastfill is a single component, polymer modified, fibre reinforced,Portland cement based repair compound, which exhibits uniquehydraulic properties to produce a rapid curing mortar withenhanced polymeric properties. Ideally suited to the repair andreprofiling of in-situ and precast concrete where a fast setting yetdurable high strength mortar is required and in locations whichrequire rapid reinstatement and are subsequently subjected toheavy wear.

Applications include the repair of slabs in industrial floors, runways, roadways and footpaths aswell areas subject to early immersion. For deeper thicknesses, the product can be bulked outwith a coarse or fine aggregate to produce a cost effective mortar for filling of large voids andfor bedding of street furniture, kerbs, drainage channels, pipes etc. Compliant with HighwaysAgency Standard BD27/86 and has DWI Approval for use in contact with drinking water.

MonolevelMonolevel is a range of single component, polymer modifiedmortars for rendering and reprofiling of in-situ and pre-castconcrete and brickwork to produce a high quality, decorativeengineering finish. Simply mixed with water on-site they produceworkable mortars which can be applied using spray, trowel orbag rubbing techniques.

Applications include fairing coats to fill minor voids and defectson new and existing structures (Monolevel FC), waterproofing ofbasements and water tanks including drinking water structures(Monolevel 844SP) and waterproof external rendering of brickand blockwork (Monolevel RM).

Cementitous Coating 851 Cementitous Coating 851 is a two component cementitious modified polymer coating whichcures to form a hard, highly alkaline film with a degree of elasticity. It protects concrete,brickwork and blockwork against the effects of freeze thaw cycles, deicing salts, carbondioxide and other acidic gases, dilute acid and alkalies as well as being a barrier to chlorideions and water even under 10 bar hydrostatic head.

This versatile coating has a range of applications including use in clean (DWI Aproved) anddirty water, basement waterproofing and chloride protection in marine and highway structures.It is particularly effective at reinstating concrete cover and a 2mm film is equivalent to 70mmof good quality concrete cover. Used in conjunction with Flexcrete Marine Mortar for repairand chloride protection in tidal zones.



Concrete RepairFosroc offers a comprehensive range of concrete repair products. The range includescementitious repair mortars, epoxy mortars, coatings and crack injection systems. From smallpatch repairs to complete concrete rehabilitation, Fosroc has the solution to suit any job.

Paveroc - Supplied as a ready to use blend of dry powders which only requires the additionof clean water to produce a highly consistent, high strength repair mortar. Paveroc exhibitsexcellent thermal compatibility with concrete and low water permeability.

Patchroc GP - Supplied as a ready to use blend of dry powders which requires only the siteaddition of clean water to produce a highly consistent, high strength, freeflowing repairconcrete which self-compacts at fluid consistency. Patchroc GP exhibits excellent thermalcompatibility with concrete and good water repellent properties. The low water requirementensures fast strength gain and long term durability.

RenderocType Size CoverageRenderoc GP 25kg bag 1.6m2 @ 10mm thicknessRenderoc HB 18kg bag 1.5m2 @ 10mm thicknessRenderoc S 25kg bag 1.2m2 @ 10mm thicknessRenderoc LA 25kg bag 1m2 @ 10mm thicknessRenderoc DS 25kg bag 2m2 @ 10mm thickness

Concrete Repair MaterialsType Size CoveragePatchroc GP 25kg bag 1.0m2 @ 12mm thicknessPaveroc 25kg bag 0.9m2 @ 12mm thickness

Concrete Repair

Cementitious repair mortarsFosroc’s cementitious repair systems include the world-renowned Renderoc mortars. These arepre-bagged, single component products available in various grades depending on theapplication.

Renderoc GP – General purpose concrete reinstatement mortar which can also be used as arender as well as all types of patch repairs. It can be applied up to 20mm thick in overhead and30mm in vertical sections. In horizontal applications 100mm thickness can be obtained.

Renderoc HB – Single component lightweight fibre and polymer modified concretereinstatement mortar for high build applications. Renderoc HB can be applied up to 80mmthick in vertical and 50mm in overhead work without the use of formwork. Thicker sections canbe achieved by use of use of formwork or built up in layers.

Renderoc S – Structural grade polymer modified concrete reinstatement mortar. Used forrepairs of large areas of concrete and for localised patch repairs. The application range is 5 - 10mm in vertical and 5 - 100mm in horizontal situations.

Renderoc LA – Single component free-flowing low alkali micro-concrete. The product is highlyfluid and obviates the need for compaction and vibration where access is restricted orreinforcement congested. Renderoc LA is ideal for the reinstatement of large structural sectionsof concrete.

Renderoc DS – Polymer modified dry spray repair mortar. DS is designed for large area repairssuch as bridges, tunnels, retaining walls, dams etc. Complies with DTp specification series 1700.

Cementitious Repair Mortars Renderoc | Patchroc | Paveroc

Dependant on water addition. Contact us for further details.


Con

cret

eR

epai

rM

ater

ials


Resin Repair MortarsFosroc has a range of epoxy and polyester reinstatement mortars for jobs where high strengthis required quickly. These include:

Nitomortar S – High strength, abrasion resistant epoxymortar, ideal for industrial floors, tanks and sea walls.Nitomortar HB – Lightweight epoxy mortar for vertical and overhead applications.Nitomortar PE – Multi-purpose polyester mortar forprecast units and universal repair particularly kerbs.Nitomortar FC – Epoxy fairing coat for filling blowholesand surface preparation.Expocrete UA – Epoxy repair mortar for underwaterapplications.

Epoxy Repair MortarsType Size CoverageNitomortar S 5, 16kg 2.5, 8 litresNitomortar HB 2.9, 9.3kg 2.5, 8 litresNitomortar PE 14kg 7.5 litresNitomortar FC 1kg 0.6 litresExpocrete UA 1.5 litre pack 1 litre/m2 per mm thickness

Coatings and bonding agentsNitobond AR – Curing membrane for Renderoc system.Nitobond HAR – Concrete bonding agent, used as primer with Renderocsystem.Nitobond SBR – Additive for improving mortars for waterproofing repairs.Also used as a bonding agent for slip bricks, ceramic tiles etc.Nitobond EP Standard/Slowset – bonding old to new concrete alsoprimer for Patchroc / PaverocNitoprime Zincrich – Epoxy zinc primer used as anti-corrosion coating forexposed steel reinforcement in concrete repairs.

Coatings and bonding agentsType Size CoverageNitobond AR 5, 25 litre drums 4-6m2/litre*Nitobond HAR 5, 25 litre drums 4-6m2/litre*Nitobond SBR 5, 25, 210 litre drums Refer to mix

designs tableNitobond EP Standard 2.5, 4.5kg packs 5m2, 10m2

Nitobond EP Slowset 4.5kg packs 10m2

Nitoprime Zincrich 1, 2.5 litre 7.4m2 per litre

Resin Repair Mortars Nitomortar | Expocrete

Bonding agents Nitobond | Nitoprime

* HAR/AR as primers, usage varies in other applications



Crack InjectionFosroc supplies crack injection systems for minor concrete repairs, ideal for in-situ or precastconcrete. These are available as pre-packaged kits for fast and easy application or as stand-alone injection grouts for bespoke repair.

Nitokit LV – Pre-packaged, low viscosity epoxy crack injectionresin, suitable for cracks down to 0.2mm atsurface or tapering down to 0.01mm.

Nitokit TH – Thixotropic epoxy crack injection resin, suitablefor open-ended cracks where depth and quantityneeds to be controlled.

Nitofil LV – Low viscosity epoxy resin injection grout.Nitofil TH – Thixotropic epoxy resin injection grout.

Crack InjectionType SizeNitokit LV/TH 12 cartridges - 0.25 litres mixed resin

per cartridge30 injection nipples6 hoses4 air release pins6 mixing racks

Nitofil TH 1 litre packNitofil LV 1.5 litre pack

Crack InjectionType Size CoverageDekguard W 10 litre drums 2.75m2 per litreDekguard S 10 litre drums 3m2 per litreDekguard Elastic 10 litre drums 1.25m2 per litreDekguard Clear 25 litre drums 7.0m2 per litreDekguard Primer 25 litre drums 2.5m2 per litre

Crack injection Nitokit | Nitofil

Coatings Dekguard W | S | Elastic | Clear | Primer

CoatingsFosroc's durable and attractive coatings are designed to perform in harsh environments andare chemical, abrasion and carbonation resistant.

Dekguard W – Water-based coloured coatingDekguard S - High performance coating for concrete and masonryDekguard Elastic – Water-based coloured elastomeric coatingDekguard Clear – Clear protective coating system. Dekguard Primer – Reactive silane-siloxane treatment for use with Dekguard products.

Nitokit accessory pack required for Nitokit LV/TH


Con

cret

eR

epai

rM

ater

ials


Adhesives Sikadur 31 | Sikadur 32

AdhesivesSikadur 31 - Two pack epoxy thixotropic adhesive for bonding building materials. Fast settingand non shrinking. For bedding tiles, wood etc. NWC/WRC certified for contact with potablewater. Normal grade (N): for 5-30°C application, Rapid grade (R): for 0-15°Capplication.

Sikadur 32 - Two pack solvent free liquid epoxy bonding agent in 1 and 5kilo packs. For bonding similar and dissimilar materials, e.g. concrete, metal,stone, glass, wood and asbestos.

AdhesivesType Size CoverageSikadur 31 1.2kg N, 6kg N 8kg/m2 (4mm thickness)

1.2kg R, 6kg R 8kg/m2 (4mm thickness)Sikadur 32 1.2kg, 5kg 0.7kg/m2 (0.5mm thickness)

Concrete Repair SikaTop Armatec 110 | SikaTop 121 | 122 | 122HB

Concrete Repair and ProtectionSikatop Armatec 110 - Anti-corrosive coating for steel reinforcement prior to concrete repair.For protection against corrosion.

Sikatop 121 - Pre-packed ready for use. Adhesive mortar, two part cement-polymer base usedfor cosmetic repairs i.e. blow holes etc. and also as a bonding bridge for Sikatop 122 or 122HB.

Sikatop 122 - High strength repair mortar, two part component cement-polymer base usedfor waterproof patching repairs to concrete, stone, mortars etc.

Sikatop 122 HB - Pre batched lightweight polymer modified cementitious mortar for repairsto concrete. Adhesive mortar, two part cement-polymer base used for non structural overheadand vertical repairs, very easy to use.

Concrete Repair and ProtectionType Size CoverageSikatop Armatec 110 2 x 5kg 0.75kg/m2/coatSikatop 121 10kg, 25kg 2kg/m2 per mm thicknessSikatop 122 10kg, 25kg 2.1kg/m2 per mm thicknessSikatop 122 HB 10kg, 34kg 2.4kg/m2 per mm thickness



Epoxy Mortars and Crack RepairSikadur 41 - Trowel applied epoxy patching mortar in concrete grey colour. For heavy dutyrepairs in damaged and defective areas in concrete, mortar, screeds, bridge bearings etc.

Sikadur 43HB - High build lightweight epoxy mortar in concrete grey colour, Cures down to50°C. Enables thicker layers to be applied especially on soffits/overhead working.

Sikadur 52 - Very low viscosity crack injection non shrink, solvent free epoxy, for repair bypouring or injection into cracks in concrete, also for stabilising lifted screeds. Colour: clear.

Sikadur 53 - Solvent free pourable epoxy resin, for repair to immersed or saturated concrete.

Sikadur 53LV - Lower viscosity of Sikadur 53, for underwater application.

Epoxy Mortars and Crack RepairType Size CoverageSikadur 41 10kg N, 10kg R 2kg/m2 per mm thicknessSikadur 43HB 5kg, 12kg 0.67kg/m2 per mm thicknessSikadur 52 1kg 1.1kg/m2 per mm thicknessSikadur 53 20kg 2kg/m2 per mm thicknessSikadur 53LV 20kg 1.9kg/m2 per mm thickness

Epoxy Mortars and Crack Repair SikaDur 41 | 43HB | 52 | 53 | 53LV

Coatings Sikacolor | Sikagard

CoatingsSikaColor 671 W - A one part coating based on water dispersed acrylicresin designed for protection, decoration and waterproofing of facades,with a smooth coloured finish.

Sikagard 550 W Elastic - A one part, plasto-elastic coating based onUV-curing acrylic dispersion with excellent crack-bridging properties evenat temperatures below 0°C.

Sikagard 680 S - A one part solvent containing coating, based onmethacrylic resins resistant to weathering, alkalis and ageing. It is available in clear andcoloured grades for use on mineral substrates including concrete and other cementitioussurfaces.

Sikagard 680 S Clear Glaze - Colourless material drying to a glossy coat, suitable asrefresher and protective coating for exposed aggregate concrete.

Sikagard ElastoColor 675 W - A one part, plasto-elastic water dispersed coating based on astyrene acrylate dispersion for the protection and enhancement of fair faced concrete.

CoatingsType Size CoverageSikaColor 671 W 25kg 0.2kg/m2 per coatSikagard 550 W 15kg 0.25-0.35kg/m2 per coatSikagard 680 S 12.5, 30kg 0.2kg/m2 per coatSikagard 680 S Clear Glaze 20kg 0.15kg/m2 per coatSikagard ElastoColor 675 W 15 litres 0.2-0.25kg/m2 per coat


Con

cret

eR

epai

rM

ater

ials


Concrete Repair Mortars weber.cem HB30 | HB40 | Fairing Coat

Weber Repair Mortars pyrapatch | pryatop

weber.cemThe weber.cem concrete repair system is a pre-batched, multi component system based onpolymer-modified Portland Cement mortars and coatings based on acrylic resins.

weber.cem keycoat - A single-component, polymer-modified, corrosion-inhibiting bonding primer for substrate concrete and steel reinforcement.

weber.cem HB30 and HB40 - Single-component, high-build polymer-modifiedrepair mortars for replacing defective concrete.

weber.cem fairing coat - A single-component, polymer-modified levelling mortarused to prevent ghosting of concrete repairs through decorative finishes.

weber.cem pyrapatch - Is a prepacked product based on hydraulic cements with speciallygraded non-reactive aggregates. The product is polymer modified which when mixed withclean water produces a fast setting repair concrete, suitable for patch or full depth repairs upto 2m2.

weber.cem pyratop - Is a prepacked hydraulic cement-based product with specially gradedaggregates. It exhibits high early strength, is dimensionally stable and has excellent abrasionresistance.

Concrete Repair MaterialsType Size Coverageweber.cem keycoat 25kg 1kg per m2

weber.cem HB30 and HB40 20kg 16 litres per 20kg bag or 0.5m2 at 30mm thicknessweber.cem fairing coat 25kg 13 litres per 25kg bag or 6.5m2 per bag at 2mm thickness

Concrete Repair MaterialsType Size Coverageweber.cem pyrapatch 25kg bag approximately 12 litresWeber.cem pyratop 25kg bag approximately 12 litres



Crack Injection Mortars weber.tec EP IK | EP injection resin (Standard/T)

Crack Injection Mortarsweber.tec EP IK - Contains all materials, application gun, and the ancillary items that willnormally be required to carry out an efficient on-site repair of cracked concrete at widthsdown to approximately 0.5 mm.

weber.tec EP injection resins – A two-component resin for crack injection systems. Theresin will structurally bond the fractured sections and seal fine cracks against ingress of waterand/or aggressive agents.

weber.tec EP injection resin T – A moisture-tolerant gel epoxy resin for structural repairs tocracked concrete and masonry. The resin will repel dampness in the cracks and bond thebroken sections.

Crack Injection MortarsType Size Coverageweber.tec EP IK 0.6 litre weber.tec EP IK filler

4 x 0.25 litre weber.tec injection resin10 x Injection nipples

4 x 320 cc plastic cartridges, plungers and nozzles1 x tube clampApplicator gun

300mm x 6.5mm dia. plastic tubeDisposable plastic gloves

Small jubilee clip to hold tubing on nipplesDetailed instruction sheet

weber.tec EP 5 litre packs 1 litre of mixed resin will fill 10 metres injection resins of crack at 1mm wide and 100mm depth

Resin Repair MortarsType Size CoverageWeber.certite mortar 26kg 12.5 litresWeber.certite bedding mortar 25kg 12 litres

Resin Repair Mortars weber.certite mortar | weber.certite bedding mortar

Resin Repair Mortarsweber.certite mortar - Is a three-component bulk pack or as a two-component handy pack,consisting of epoxy resin, hardener and selected graded aggregates (filler) which when mixedproduce a high strength, impermeable and chemically resistant mortar.

weber.certite bedding mortar - A two-component polyester based mortar suitable forbedding and fixing of manhole cover frames, landing lights and pre-cast concrete units.


Con

cret

eR

epai

rM

ater

ials


weber.cote CoatingsType Size CoverageClear 15 litres 4 to 6m2/litreSmooth 15 litres 8 to 10m2/litreEC 15 litres 2 to 2.5m2/litreFlexible 15 litres 2 to 2.5m2/litreweber.cote primer 15 litres 7 to 10m2/litre

Coatingsweber.cote coatings (was mulsicoat coatings)Single-component, acrylic anti-carbonation coatings for the long term protection of existingconcrete and new repairs. Available in clear, pigmented smooth, flexible and elastomericversions. weber.cote coatings are applied by brush, roller or airless spray in two coats. Ifstabilisation of the concrete is required prior to application, the surface should be treatedusing weber.cote primer (was sealercoat).

The coverage of weber.cote coatings will vary depending on the type of substrate and thesurface porosity. The following is a guide for brush or roller application 2 coats on to smoothsurfaces.

Coatings weber.cote

Notes

Gro

undw

ork

Engi

neer

ing

5Gas Barrier Systems 118Geotextiles 121Damp Proof Membranes 126Groundwork Protection 127Gabions 127

Gro

undw

ork

Engi

neer

ing


Gro

undw

ork

Engi

neer

ingOur range of civil engineering products

have been used in the industry formany years, providing products forSeparation, Reinforcement, Drainageand Erosion Control used in major civilengineering projects, including Road,Rail and Bridges.

Gas barrier systems are designed toprovide complete protection against theingress of harmful methane, radon andCO2 gases. Used in conjunction withGas Resistant DPC, Gas BarrierJointing System and Gas Resistant SelfAdhesive Membrane, these systemsoffer superior protection and are allsupplied from the major manufacturers.

Other ancillary products includePolythene, Temporary Protection,Gabions, accessories and tools.

Products Page

Gas Barrier SystemsFosroc - Proofex Total 118Marley Waterproofing -Gasgard DPC / GasSealDPM 118Ruberoid - Gastite DPM/LL 119SCP - Bitusheet Gas BarrierMembrane 119Visqueen - Radon SystemBRE083/01 120Methane System 120CO2 Gas Membrane 120

Geotextiles1000, Advantage, 2000,3000, 4000 121Erocell / Trinter Mat 121Filtram B1 / 1B1 / 1C1 /1BZ / Frost & Salt Barrier 122TerramGrid W 122Autogrid 123Autoway 123Support Site Geotextile 124Rhyno, Fibretex, TeleGrid,CellWeb 124

ProtectionPolythene DPM 126Megafilm 127Gabions 127Frost Blankets 128Bubble Wrap 128Hessian 128Antinox 128

Groundwork Engineering

Groundwork Engineering118

Gro

undw

ork

Engi

neer

ing


Proofex Total

Proofex TotalReinforced gas membrane designed to protect buildings and their occupants from the effectsof methane, radon, carbon dioxide and other harmful gases. Like conventional groundmembranes, Proofex Total also acts as a damp-proof membrane to help protect the buildingagainst the ingress of moisture from the ground.

Ancillaries

Proofex Total TapeDouble-sided butyl tape for sealing of side and end laps and for use in detailing work.

Proofex Top HatsMDPE sheathing, which encapsulates an aluminium foil layer.

Proofex TotalType SizeProofex Total 2 x 25mProofex Total Tape 50mm x 30m

Gasgard DPC/GasSeal DPM

Gas Barrier SystemMarley Waterproofing's Gas Resistant Barrier System consists of Gasgard DPC and GasSealDPM, providing an effective barrier within the cavity, floor or basement construction againstmethane, carbon dioxide and radon. Marley Waterproofing's Gas Resistant Barrier System hasbeen approved by the British Board of Agrement, certificate no. 97/3353.

GasgardIt is constructed from an aluminium cored Hessian reinforced bitumen DPC suitable for use inbrick, block, stone and concrete and when detailed correctly prevents gas rising within cavitywalls. The system is used where construction conditions necessitate the prevention ofmethane, carbon dioxide and radon gases from permeating into the structure of a building.

GasSealIt is constructed from an aluminium lined cross laminated polyethylene coated self adhesivebitumen membrane providing an effective gas barrier on concrete, precast floor planks andblock and beam floor construction.

Ancillaries

Gasgard Jointing StripA bituminous sealing tape, it is used to cover the joints of Gasgard DPCand Gasseal DPM to protect the exposed aluminium foil from alkalisfound in concrete.

Bituminous PrimerA thin bituminous solution to be used for priming porous bricks, block,stone and concrete surfaces prior to application of Gasgard and Gasseal.

Gas Barrier SystemType SizeGasgard DPC 400mm, 450mm, 500mm, 550mm, 600mm, x 8mGasgard Jointing Strip 50mm x 20mGasSeal 1050mm x 19.5mGasgard special sizes available on application

Groundwork Engineering 119


B U I L D I N G P R O D U C T SGastite Gas Barrier System

Gastite DPMA self adhesive damp proof and tanking membrane for protecting structures against theingress of moisture and common ground gases e.g. methane, CO2, radon, etc.

Gastite LLA loose laid damp proof membrane for the protection of building structuresagainst damp and common ground gases e.g. methane, CO2, radon, etc.

Gas Barrier MembranesType Size Gastite DPM 1m x 20mGastite LL DPM 1.6m x 30mGastite Double Sided Jointing Tape 50mm x 10mGastite Foil Backed Girth Jointing Tape 75mm x 50mPre-formed Pipe Collars (Top Hats) Various

See the accessories section for spray guns, lap rollers, brushes and cleaning equipment

Bitusheet Gas Barrier Membrane

Bitusheet Gas BarrierA high density polyethylene sheeting laminated to aluminium foil and coated with a selfadhesive bitumen/polymer compound. Bitusheet Gas Barrier Membrane is designed for use asa cold applied flexible membrane to provide a barrier to Methane and Radon gases.Incorporating a 50mm selvedge on one edge to form homogenous overlap joints. BitusheetGas Barrier Membrane may be laid onto concrete blinding or directly onto compacted sandblinding with the longitudinal and end overlaps sealed.

Ancillaries

Bitusheet PrimerA one part bituminous solution for brush or spray application. To provide the sealing of poroussurfaces to promote adhesion of Bitusheet and self bonding flashings.

Bitusheet Reinforcing TapeSelf Adhesive Reinforcing Tape comprises of a cross laminated high density polyethylene sheetcoated with a Bitumen Polymer Adhesive, faced with a release sheet.

Bitusheet Reinforcing StripUsed to reinforce corners and changes in direction.

Bitusheet MasticBitusheet Mastic Filler is a bituminous mastic of trowelling consistency.

Bitusheet HD Protection BoardA tough durable Polymeric protection board to prevent damage to the membrane during backfill.

Gas Barrier SystemType Size CoverageBitusheet Gas Barrier 1050mm x 28.57m 30m2

Bitusheet Primer 5ltr can, 25 ltr drum 10-12m2/litreBitusheet Reinforcing Tape 100, 150, 300mm x 20m n/aBitusheet Reinforcing Strip 300m n/aBitusheet Mastic 25kg n/aBitusheet HD Protection Board 3mm x 1m x 2m 2m2


Gro

undw

ork

Engi

neer

ing


Radon System

Radon Protection System BRE 083/01Independently Accredited by BRE Certification Ltd (Certificate Number 083/01) VisqueenRadon Membrane is an unreinforced polyethylene membrane, suitable for use in the protectionof buildings from the ingress of Radon gas. Visqueen Radon Membrane will act as an effectivepassive radon membrane in most typical applications when installed in accordance with ourinstructions and will also act as a Damp Proof Membrane.

Gas Barrier Methane System Visqueen Gas Barrier offers a safe solution for the protection of buildings against methane, radonand carbon dioxide, when installed in accordance with BRE Report: Construction of buildings onGas Contaminated land. Visqueen Gas Barrier is a multi layer reinforced polyethylene membranewith an integral aluminium foil. For ease of identification on site Visqueen Gas Barrier is colouredblue tint on one side and silver on the reverse. The Barrier is flexible and is easy to install.Visqueen Gas Barrier is also suitable for use as a damp proof membrane.

Radon Protection SystemType Colour Size WeightRadon Membrane Red 25 x 4m x 300mu 27.6kg

Visqueen Membrane AncillariesType SizeZedex CPT High Performance DPC 100–1500mm x 20mDouble Sided Jointing Tape 50mm x 10m Foil Backed & Standard Girth Jointing Tape 100mm x 30mPre-formed Top Hat Units To suit pipe diameterRadon Sump 220 x 430 x 430mm

CO2 Gas Membrane

Gas Barrier Methane System

CO2 Gas MembraneThe Building Regulations require that proper precautions be taken to prevent danger to healthand safety when building on contaminated land. Visqueen CO2 Gas membrane offers a safesolution for the protection of buildings against carbon dioxide, when installed in accordance withBRE Report: 414 "Construction of buildings on gas contaminated land". Visqueen CO2 is a robustpolyethylene-based membrane; for ease of identification on site the membrane is coloured yellow.The Barrier is flexible and is easy to install, will also act as a damp proof membrane.

Ancillaries

Visqueen Zedex CPT High Performance DPC. - A new generation of damp proof course,made from Co-Polymer Thermoplastic (CPT), it possesses the characteristics necessary for it toperform effectively under harsh conditions.Visqueen Double Sided Jointing Tape. - A butyl based double sided tape for joins and laps.Visqueen Foil Backed & standard Girth Jointing Tape. - A single sided jointing tape suitablefor securing laps and joints.Pre-formed Top Hat Units. - For effective sealing around service pipe penetrations.Visqueen Gas Resistant Self Adhesive Membrane. - A self adhesive membrane designed toprevent the transmission of radon and methane gases.Radon Sump. - Where sub-floor depressurisation is required a Radon Sump should be used.This is a prefabricated plastic sump, to which pipe work is connected.

CO2 Gas MembraneType Colour Length Width WeightCO2 Gas Membrane Yellow 25m 4m 27.6kg



Separation 1000 | Advantage | 2000 | 3000 | 4000

Ground StabilisationTerram Geotextiles, provide an effective solution to the age-old problem of constructing stableroads, driveways, car parks, and footpaths over soft foundation soils. Terram prevents theintermixing of the granular layer with the soft subgrade, whilst allowing controlled passage ofexcess pore water from the soft subgrade.Terram is also suitable for Land drains, French drains and soakaway applications.

Available grades from 65g/m2 to 335g/m2

TerramType Length Width Weight1000 100m 4.5m 65kgAdvantage 100m 4.5m 45kg2000 100m 4.5m 105kg3000 100m 4.5m 125kg4000 50m 4.5m 80kg

Erosion Control Erocell | Trinter Mat

ErocellErocell can be used in many slope protection applications, eliminating the need forcomplicated construction techniques.Its cellular structure confines and reinforces infill material, greatly improving resistance toerosive forces such as rainwater run-off on steep or unstable slopes. Erocell provides the means to fully vegetate slope surfaces where it would not otherwise bepossible. A variety of infills can be used depending on the application.

Trinter MatTrinter Mat is an erosion control net made of strong polyethylene and polypropylene. It offerspermanent protection against soil erosion from the moment it is installed and is now beingused extensively throughout Europe with great success. Easy to use, very strong and durablewith a high resistance to degradation, Trinter can be used on all kinds of slopes.

Eurocell and Trinter MatType Length Width Thickness26C 100m 5m 0.64mm35C 100m 5m 0.59mm42A 100m 3.8m 0.65mmTrinter Mat 25m 2m 20–25mm


Gro

undw

ork

Engi

neer

ing


Drainage Composites Filtram B1 | 1B1 | 1C1 | 1BZ and Frost & Salt Barrier

Drainage CompositesTerram composites provide and maintain high flow paths for water and gases, thereforemaintaining soil stability. It separates and protects structure from fill material and being lightand easy to handle they are quick to install and demonstrate a cost effective replacement toconventional materials.

B1 Suitable for vertical structure applications where waterproofingprotection is not a requirement

1B1 Suitable for vertical or inclined structure and ground drains and plays animportant role in protecting structure water proofing.

1C1 Similar characteristics to 1B1 with greater flow capacity.1BZ Suitable for vertical or inclined structure and ground drains, it has an impermeable

surface making it ideal for cut-off drains and methane gas control in wastemanagement.

Frost & Salt Barriers Prevents frost heave and/or Salt damage by acting as a capillarybreak above the water table, thus eliminating the damaging sequenceof events that occurs withfrost heave.

Drainage CompositesType Length Width ThicknessB1 25, 50, 100m 2, 4m 4.5mm1B1 25, 50, 100m 2, 4m 5mm1C1 25, 100m 2, 4m 5.8mm1BZ 25, 50, 100m 2, 4m 5mmFrost & 25m 2m 5.5mmSalt Barriers

TerramGrid W

TerramGrid W Terram Grid-W Woven Geogrid is a medium term slope soil reinforcement, consisting of apolyester woven grid with PVC coating.

TerramGrid W Size Aperture width LD Aperture width TD Weight100m x 5m 20mm 20mm 135kg100m x 5m 35mm 25mm 140kg100m x 5m 15mm 15mm 150kg100m x 5m 20mm 20mm 150kg50m x 5m 20mm 20mm 100kg50m x 5m 20mm 20mm 100kg

LD – Longitudinal direction, TD – Transverse direction.



autoGRID

autoGRIDBiaxial extruded polyproplene geogrids - for ground reinforcement and stabilisation. autoGRIDis a biaxially orientated high strength geogrid with, typically, equal strength in both directions,high junction and rib strength and full resistance to microbiological and chemical ageing.autoGRID is designed for use as a basal reinforcing element in various civil engineeringgroundwork applications including road and railway construction, access roads, erosioncontrol and paved area stabilisation.autoGRID can reduce the quantity and therefore the cost of importing aggregates to site.Longer life of installations is guaranteed at minimal cost. Working conditions on soft sub-grade sites are improved.

Ancillaries

In addition to autoGRID a comprehensive range ofgeosynthetic products is available including: • Autoway woven geotextiles, see below• Erosion Control mats • Grass protection meshes • Geocell

Autoway

AutowayAutoway Woven Fabrics have been designed for use in a variety of civil engineeringapplications from road works and drainage systems to erosion control projects and have beenfound to be ideal in areas where poor ground conditions prevail and weak sub-soil is evident.Autoway Fabrics are woven from extruded polypropylene tapes with a very low specific gravity,producing a product of regular construction with a high strength to weight ratio. It will notabsorb any appreciable amount of moisture and are unaffected by soil alkalinity or soil aciditymaking them ideal in road and drainage applications and is unaffected by bacteria or fungi.Properly installed Autoway Fabrics will retain their high strength and other properties for manyyears.

Autoway 90 - The economic general purpose fabric combining superior tensile strength andpuncture resistance qualities in comparison to standard non-wovens along with a permeabilitylevel more than double the normal D.O.T. highway works specification. Autoway 120 - Well established as the grade ideally suited for a wide range of applicationsfrom land reclamation, equestrian areas, forestry access roads and major road projects wherehigher strength and puncture resistance qualities are required. Autoway 150 - A significant addition to the range which combines excellent mechanicalproperties with relative economy.Autoway 200 - The main heavyweight fabric becoming increasingly specified in highwayprojects where there is a requirement for a high load bearing capacity and where the subbase is of inferior quality.Autoway 240 - The strongest and heaviest grade and the most suitable in river and coastalerosion applications and where exceptionally weak subsoil and very harsh conditions may beencountered.

autoGRID Type A1 AT WLR WTR tJ tLR tTRGrade 20–20 42 42 4.2 4.8 3.5 1.2 0.9Grade 30–30 42 42 4.4 5.2 4.7 1.9 1.5Grade 40–40 38 38 3.9 4.6 5.4 2.4 1.9


Gro

undw

ork

Engi

neer

ing


Autoway Type Size ThicknessAutoway 90 4.5 x 100m 0.34mmAutoway 120 4.5 x 100m 0.45mmAutoway 150 4.5 x 100m 0.60mmAutoway 200 4.5 x 100m 0.75mmAutoway 240 4.5 x 100m 0.87mm

Woven GeotextileType SizeSupport Site Woven Geotextile 2, 4.5 x 100m

Mechanical properties are available from yourlocal branch, other widths can be made to order.

Support Site Woven Geotextile is strong, tough and durable for use in ground stabilisation.

Woven Geotextile

Woven Geotextiles Rhyno GW8118 | GW8123 | GW8129 | GW8143 | GW8161 | GW8180

RhynoRhyno woven geotextiles are strong, robust and durable, a combination of advanced weavingtechnology and industry leading design has produced an ideal separation textile. The Rhynorange is suitable for almost every application including separation, support, reinforcement,filtration and drainage.

RhynoType Length Width Tensile StrengthGW8118 100m 4.5m 18knGW8123 100m 4.5m 20knGW8129 100m 4.5m 21knGW8139 100m 4.5m 35knGW8143 100m 4.5m 44knGW8161 100m 4.5m 46knGW8180 100m 4.5m 65kn

FibertexType Length Width WeightF-20 100m 4.5m 100g/m2

F-22 100m 4.5m 120g/m2

F-300 100m 5m 180g/m2

F-330 100m 5m 250g/m2

F-4M 100m 5m 320g/m2

Non-woven Geotextiles Fibertex F-20 | F-22 | F-300 | F-330 | F-4M

FibertexFibertex is a non-woven needle punched polypropylene geotextile and is one of the mosttechnically proficient products of its kind available today. Supplied in either needle punched orneedle punched / thermally bonded formats, Fibertex geotextiles are extremely versatile andable to meet the demands of today’s construction environments. Designed to deliver highperformance solutions in a range of applications such as separation, support, protection,filtration and drainage Fibertex geotextiles have earned a world wide reputation as a toughperformer.



TenaxTenax LBO bi-oriented geogrid, with a high tensile strength in both directions and a uniformdistribution of rectangular apertures, Tenax LBO is ideal for paved and unpaved roads,industrial yards, embankments, foundations in very soft soil, etc. By confining the granular filland providing tensile reinforcement Tenax LBO helps distribute loads more effectivley, resultingin reduced rutting and shear failure.

CellWeb

Extruded Geogrid LBO220 | LBO330 | LBO440

CellWebCellWeb is a three dimensional, cellular-confinement system. It is an expandable honeycomb like,cellular structure that dramatically improves the performance of infill materials. Extremely versatileand adaptable CellWeb provides effective and economical solutions in a wide variety ofapplications including ground stabilisation, slope protection,retaining walls and channel and tree root protection. Use ofCellWeb can significantly reduce construction time and sitecosts. It improves the performance of the construction and is anenvironmentally friendly product. A proven product with millionsof square metres installed world wide CellWeb answers many oftoday’s challenging geotechnical design problems.

CellWebType Length Width Cell depth ThicknessCellWeb (large cell) 13.72m 2.56m 75, 100, 150, 200, 300mm 1.25mmCellWeb (standard cell) 8.1m 2.56m 75, 100, 150, 200, 300mm 1.25mm

TeleGridType Length Width Tensile StrengthTG20/20 40m 5.3m 20knTG30/30 40m 5.3m 30knTG40/40 40m 5.3m 40kn

TenaxType Length Width Tensile StrengthLBO220 50m 4m 20knLBO330 50m 4m 20knLBO440 50m 4m 20kn

Woven Geogrid TG20/20 | TG30/30 | TG40/40

TelegridTelegrid is a polyester geogrid offering high strength at low elongation and is available as a bi-axial geogrid (strength in both directions) and as a uni-axial geogrid (strength in onedirection). The main applications for Telegrid are sub base reinforcement, retaining wall andsteep slope construction. In sub base reinforcement this high strength reinforcing geogridincreases the bearing capacity of soft subsoils and reduces rutting. Being a grid, Telegridallows the stone infill to interlock with both the grid and the material below the grid. Thisaction increases the horizontal shear strength of the construction. When poor ground is aproblem Telegrid provides a solution to your stabilising requirements.


Gro

undw

ork

Engi

neer

ing


Polythene DPM

Tuffreel

Support Site certified Polythene DPMDamp-Proof membranes for use in solid concrete ground floors (not subject to hydrostaticpressure) to protect buildings against water from the ground.

Preparation/InstallationSupport Site BBA Polythene has a high resistance to puncture and will not be damaged byfoot traffic. The membrane should be jointed in accordance with the BBA recommendationsusing BBA DPM jointing tape.

TuffreelHigh tear resistance, great tensile strength and no pin-holes. Roll weight and full dimensionsshown on label, minimum roll weight guaranteed, colour coded for easy on-site identification.Manufactured to the PIFA Standard and BBA Certificate.

Polythene DPMType Size125 MU (500 Gauge Polythene) 4 x 50m250 MU (1000 Gauge Polythene) 4 x 25m300 MU (1200 Gauge Polythene) 4 x 25m500 MU (2000 Gauge Polythene) 2 x 25m

4 x 12.5mTemporary Protection (TPS) 4 x 25m

Polythene DPMType Size Weight250mu 4x25m 23kg minimum300mu 4x25m 27.6kg minimum500mu 4x12.5m 23kg minimum

Polythene DPM

Polythene DPMManufactured from high quality reprocessed low density polyethylene (LDPE) Visqueen DampProof Membranes have successfully prevented moisture penetration from floors for manyyears. • Conforms to PIFA standard 6/83A:1995. • High puncture resistance. • Withstands rough site handling. • Comprehensive range to satisfy most site conditions.

Polythene DPMType Size Weight250mu 25m x 4m 23kg300mu 25m x 4m 27.6kg500mu 12.5m x 4m 23kgDouble sided jointing tape 10m x 50mm n/aGirth jointing tape 33m x 100mm n/a



Megafilm

MegafilmA range of flame retardant protection sheets accredited to LPS 1207. Certified by LossPrevention Certification Board (LPCB) in compliance with Loss Prevention Standard (LPS1207). Comprehensive range of grades to suit most applications and surfaces. Megafilm HighPerformance has improved anti-slip and high impact characteristics over the standard grade.

MegafilmType Size Weight AreaLight duty 167m x 1.5m x 65mu 16.4kg 250m2

Medium duty 134m x 1.5m x 120mu 24.3kg 200m2

Heavy duty 67m x 1.5m x 175mu 17.7kg 100m2

High performance 55m x 1.82 x 120mu 12kg 100m2

Megaboard 2.44m x 1.22 x 2mm 0.8kg 2.98m2

Housing grade 160m x 0.625m x 120mu 11.16kg 100m2

T400 Jointing tape 50m x 100mm n/a n/aT600 Jointing tape 50m x 50mm n/a n/aMedium duty tape 66m x 77mm n/a n/a

Gabions

GabionsTriple twist woven mesh gabionsThey are designed on the principle of mass earth retaining wall. The strength and flexibility ofthe triple twisted mesh helps withstand and absorb the forces generated by retained earth orflowing water. Gabions are rectangular boxes which are formed from panels of ‘triple twisted’mesh which are framed by thicker selvedge wires. End panels and internal diaphragms at 1.0mcentres are then wired to the base of the gabion. The triple twist weaving of the wire preventsunravelling.

Constructed from wire manufactured to comply with BS1052:1996 and self edged with thickerwire. Wire is galvanised in accordance with BS 443:1990, with minimum thickness complyingwith the requirements of table 4 of BS 443. Life expectancy of PVC-U coated mesh in dry landretaining walls is considered to be 120 years.

Standard Mesh and Wires SizesStandard Mesh size Mesh Wire GI Dia. Selvedge Wire GI Dia.60 x 80 2.0 2.780 x 100 2.2 3.0100 x 120 2.7 3.4

Gabion Box SizesLength Width Height1m 0.5 or 1m 0.5 or 1m1.5m 1m 0.5 or 1m2m 0.5 or 1m 0.5 or 1m3m 1m 0.5 or 1m4m 1m 0.5 or 1m


Gro

undw

ork

Engi

neer

ing


Frost BlanketsApplication: Laying concrete at temperatures below 5ºC generally requires special precautions(such as special concrete additives, heating devices, hot vapour equipment etc.). An easy andinexpensive solution is the use of Frost Blankets. The thermal insulation effect of the FrostBlanket significantly reduces the loss of natural concrete hydration heat and thereby keeps theconcrete warm long enough for a safe curing.

Benefits: Concrete laying in summer and winter season. The combination of their excellentthermal insulation performance, their negligible water absorption and their flexibility makeFrost Blankets from Support Site ideal for improved concrete curing.• negligible water absorption• excellent thermal insulation• excellent chemical resistance• fast laying from the roll

Frost Blankets from Support Site can be directly rolled onto the wet concrete. Wind conditions might necessitate the mats being held in place by suitable loading at the contractor’s discretion. Beware not to walk on the mats during installation and before hardening of the concrete.

Support Site Bubble WrapA versatile bubble film sheeting on a roll. Used for alow cost concrete curing blanket/frost blanket andprotection membrane.

Bubble WrapSize 1.5 x 100m

Frost BlanketsSize 1.5 x 100m

HessianHessian Rolls for frost protection andcuring of concrete and brickwork.

Hessian RollsSize 1.37 x 100m

• lightweight, easy to handle and cut• good mechanical resistance• flexible at very low temperatures

Frost Blankets

Protection Bubble Wrap l Hessian

AntinoxDurable impact resistant fluted protection board, available instandard and Fire Retardent (FR) grades. Manufactured fromthermally extruded double skinned polypropylene sheets.

The flame retardant grade has been tested by an independant NAMAS accredited laboratory and meets therequirements of the five individual tests in the LossPrevention council's LPS 1207 specification. Antinox is available in either black or translucent.

Antinox FR

AntinoxType Size Antinox 1.2 x 2.5mAntinox FR 1.2 x 2.5m

Acc

esso

ries

& E

quip

men

t

6Applicator Guns 130Tools 131Sprayers and Mixers 131Fixings 132Safety Equipment 136

Acc

esso

ries

&Eq

uipm

ent


Acc

esso

ries

,Too

lsan

dS

afet

yEq

uipm

entA selection of the Civil Engineering and

Building Accessories can be found inthis section including applicator guns,sprayers and safety equipment.

All accessories, tools and safetyequipment are sourced from thepremium manufacturers to ensurereliable usage time after time.

Not all products are listed or stocked inevery branch, please contact your localbranch with specific enquiries.

Products Page

Guns 130Brushes 130Tapes 130Tools 131Sprayers 131Mixers/paddles 131Fixings 132Safety equipment 136Ancillaries 136

Accessories, Tools and Safety Equipment

Accessories, Tools and Safety Equipment130

Acc

esso

ries

,Too

lsan

dS

afet

yEq

uipm

ent

Guns

Guns

Skeleton Gun – High quality gun for use with all 310 to400cc cartridges

G Gun – Bulk gun used to apply gun grade.

Pointing – For repointing brick and masonary joints.

380ml Co-Axial

Plus Bond – Supplied to be used with a three-part mixEasiPoint EP which can be placed by hand or gun-appliedusing disposable cardboard cartridges.

Lokfix – Grout dispensing hand gun, to use with injectedgrouting systems

Resin Hand Pumps – Resin dispensing gun, to use withresin injection systems

Cartridge Gun Systems

Foambond Guns – Plastic and metal versions available.

Follower Plate - used to transfer sealant from can to bulk gun.

Brushes

Brushes – A range of specialist and general purpose brushesare available in sizes from 1 to 6”, ideal for painting, tar (long &short) and slurry.

Brooms – A range of specialist and general purpose brooms,available for concrete finishing through to cleaning

Rollers & Trays - Paint roller and tray set

Wire Brush – In various sizes with and without scraper back

Brushes

Tapes

Masking – Suitable for interior masking and very light packaging. 24mm, 36mm, 48mm,75mm and 100mm widths x 50m rolls.

GP Formwork and Shuttering – Polythene DPM joints should be sealed by overlap of100mm wide Jointing tape available in 50, 75 and 100mm x 33m long.

Gaffa – Laminated polythene/cloth tape coated with an aggressive pressure sensitiveadhesive.

Double-sided – 50mm x 50m rolls available in HighTack/ High Tack combination or High Tack/ Low Tack.

Tape Guns – Cuts down on the time needed to joinmaterials. Tape guns are available in 50mm wideStandard Duty, 50, 75 and 100mm wide Heavy Duty.

Tapes


Accessories, Tools and Safety Equipment 131


Tools

Trowels – Made from finest steel in plain, flat back round nose, double round ended andnotched styles.

Power Tools – A range of power tools are avilable.

Bull Float – Hard wearing magnesium alloy tool for smoothing, levelling andfinishing large areas of screed and wet concrete.

Drill Bits – A range of drill bits are available to fit with all on-site requirements.

Concrete Scoop – concrete handling hand scoop

Concrete Curing Tank – Complete with heater, temperature controller, wire rack and mainstail lead and plug.

Notched Leveller – Notched blade for levelling floor toppings.

Plastic Hand Float

Slump Cone – Slump cone used with tamping rod, sold separately.

Spiked Roller – The spiked roller for rolling out air bubbles from self levelling floor toppings.The spiked discs are solvent resistant for ease of cleaning.

Spiked Shoes – The spiked shoes are for walking over self levelling floor toppings.

Squeegy – Smooth edge squeegee 1000mm width

Straight Edges – With grips for tamping and leveling concrete.

Tell-tale – Crack monitoring system.

Thermometers – Range of traditional and digital thermometers.

Tools

Tek Screws

Case hardened carbon steel self-drilling screws for general fixing to steel 5.5mm diameter x38mm c/w washer. (Other sizes available to order).

Sprayers

Sprayers are the contractor's preferred tool for spraying release agents and water-basedsealing and concrete curing compounds on site. We stock a range of small, standard andknapsack sprayers, extension lances and spares.

Tek Screws

Sprayers

Mixers

Mixers and Paddles

Mechanical Mixer 110V – MM22 1150w, 2 speed mixer, heavy duty use for mixing grouts,floor levellers, epoxy and cementitious repair materials. Mix quantities from 1 to 165 litres. 250and 450rpm speeds.

Mixing Paddles – MR4 - for mixing cementitious mortars, MR3 - for mixing cementitiousgrouts, Paddle stirrer - for use in standard drill to mix product.

Stirrups - to hold can while mixing.

Fosroc Cleaner - to clean equipment.

Follower Plate - Used to transfer sealant from can to bulk gun.


Acc

esso

ries

,Too

lsan

dS

afet

yEq

uipm

ent


Fixings Chemical Fixings

Chemical FixingsFIS-EM390Best performance mortar in the shuttle cartridge based on epoxy resin. Optimum solution forconcrete (anchor rods and reinforcement bars). Resin and hardener are stored in two separatechambers and are not mixed and activated until pushed through the static mixer. Partially usedcartridges can easily be reused by changing the static mixer.

FIS-P380CStyrene-free, injection mortar which contains a strong, quick setting 2-componentmortar, which is stored in separated compartments. Only when using the settingmortar the 2 components are combined in the static mixer. The setting mortar isactivated, when the extruded mortar turns grey in colour.

FIS-V360SStyrene-free, quick-curing high-performance hybrid mortar (contains vinyl esterresin and cement). Resin and cement as well as water and hardener are stored intwo separate chambers and are not mixed and activated until pushed through thestatic mixer. Partially-used cartridges can easily be reused by changing the staticmixer.

FIP-300SFStyrene-free, low odour, injection mortar which contains a strong, quick setting 2-component mortar, which is stored in separated compartments. Only when usingthe setting mortar the 2 components are combined in the static mixer. The settingmortar is activated, when the extruded mortar turns grey in colour.

R EurobondThe fixing system consists of the Internal-threaded anchor RG MI and the Resin capsule R M.The Resin capsule R M contains quick-curing styrene-free vinyl ester resin. Suitable forcommercially-available metric screws and threaded rods. During setting, the edges of theinternal threaded anchor destroy the capsule in the drill hole, mix and activate the resin. Theresin adheres to the entire surface of the internal threaded anchor, bonding it to the wall ofthe drilled hole.

Resin Capsule R MSizes: 10/80, 12/90, 14/110, 14/90, 18/125, 25/170, 28/210, 35/280 drill diameter(mm) / min. anchor depth (mm)

Zinc plated threaded stud RG MSizes: 8/110, 8/150, 8/250, 8/350, 10/130, 10/165, 10/190, 10/250, 10/350, 10/500,12/160, 12/220, 12/250, 12/300, 12/380, 12/600, 16/165, 16/190, 16/250, 16/300,16/380, 16/500, 16/750, 20/260, 20/350, 20/500, 20/750, 24/300, 24/400, 24/600,30/380, 30/500, 30/750 Corresponding R M Capsule / threaded rod length (mm)

Stainless Steel threaded stud RG MSizes: 8/110, 8/150, 8/250, 8/350, 10/130, 10/165, 10/190, 10/250, 10/350, 12/160, 12/220,12/250, 12/300, 12/380, 12/600, 16/165, 16/190, 16/250, 16/300, 16/380, 16/500, 20/260, 20/350,20/500, 24/300, 24/400, 24/600 Corresponding R M Capsule / threaded rod length (mm)



Chemical FixingsType Size QuantityFIS-EM390 390ml 6 cartridges + 2 nozzles eachFIS-P380C 380ml 12 cartridges + static mixerFIS-V360S 360ml 1 cartridge + static mixerFIP-300SF 300ml 10 cartridges + static mixer

FIS-AK GUNApplicator gun for use with FIS V360 S, FIS HB,FIS EM 390 S, FIS VS 150 C and Single-component PU foam

FIP co-axial applicator GUNApplicator gun for use with FIS P380 C and FIPC SUPER 700

Long Shaft FixingsS-RS Suitable for fixing: Concrete, Solid brick, Solid sand-lime brick, Solidblock made from lightweight concrete, Hollow block made fromlightweight concrete, Lightweight concrete.

A4Size: 12/70 diameter (mm) / anchor length (mm)GalvanizedSizes: 10/60, 10/70, 12/70 diameter (mm) / anchor length (mm)

FUR frame fixingsUniversal frame fixing. Anchorage in solid materials bymeans of friction locking. The asymmetrical close set teethexpand and formlock in hollow materials. Fixing sets withA4 stainless steel safety screws can for applications indamp conditions.

A4Sizes: 8/80, 8/100, 8/120, 10/80, 10/100, 10/115, 10/135, 10/160, 10/185, 10/200, 10/230,14/140, 14/165, 14/180, 14/210 diameter (mm) / anchor length (mm)GalvanisedSizes: 8/80, 8/100, 8/120, 10/80, 10/100, 10/115, 10/135, 10/160, 10/185, 10/200, 10/230,14/140, 14/165, 14/180, 14/210, 14/240, 14/270, 14/300, 14/330, 14/360 diameter (mm) /anchor length (mm)

Nylon hammerfixThe fixing is expanded when the nail is driven in, and holds byfriction in the drill hole. Screw nail in A2 stainless steel forapplications in damp conditions. Suitable for fixing: Concrete,Natural stone with dense structure, Solid brick, Solid sand-lime brick, Solid block made fromlightweight concrete, Aircrete, Solid panel made from gypsum, Vertically perforated brick,Perforated sand-lime brick, Hollow block made from lightweight concrete

Sizes: 5/30, 5/40, 5/50, 6/40, 6/60, 6/80, 8/60, 8/80, 8/100, 8/120, 10/100, 10/135, 10/160,10/230 diameter (mm) / anchor length (mm)

Fixings Long Shaft Fixings


Acc

esso

ries

,Too

lsan

dS

afet

yEq

uipm

ent


Fixings General Fixings

Fixings Insulation Fixings

General FixingsSX plugsNylon expansion fixing, for use with wood, chipboard and self-tapping screws and ASL spacerscrews (see chapter spacer screws). SX long version for maximum load-bearing capacity inperforated building materials, aircrete and to bridge plaster.Sizes: 4/20, 5/25, 6/30, 6/50, 8/40, 8/65, 10/50, 10/80, 12/60, 14/70, 16/80 diameter (mm) /anchor depth (mm)

UX plugsNylon universal fixing, expansion in solid building materials, reliable knot formation in allcavities. Use UX 6 long version with fischer spacer screws for maximum load-bearing capacityin perforated materials, double-skinned plasterboard and for bridging non-load-bearing layers.Sizes: 5/30, 6/35, 6/50, 8/50, 10/60, 12/70, 14/75 diameter (mm) / anchor length (mm)

S plugsNylon expansion fixing, for use with wood, chipboard and self-tapping screws Sizes: 4, 5, 6, 8, 10, 12, 14, 16, 20 diameter (mm)

PD plasterboard fixingsNew standard cavity board fixing for interior installation work. Theprocedure for using it is convincing, fast and easy.Sizes: 8/29, 10/28, 12/27 drill diameter (mm) / fixing length (mm)

Insulation FixingsDHK insulation productsImpact-resistant plastic insulation fixing. When driven in, the fixing grips thehole walls by means of its rough profile.Size: 40, 60, 80, 100 120, 140 usable length (mm)

Fixings High Performance Steel Anchors

High Performance Steel AnchorsFBN through boltsAnchor bolt for push-through and pre-positioned installationWhen the hexagon nut is tightened, the taperedbolt is pulled into the expansion clip andexpands it against the hole wall. A4 stainlesssteel and hot-dip galvanised version for outdooruse and in damp conditions. For woodenstructures use the FBN GS with large washer asper DIN 440.

A4Sizes: 6/10, 6/30, 8/10 + 23, 8/30 + 43, 8/50 +63, 10/15 + 23, 10/50 + 58, 10/100 + 108, 12/15+ 35, 12/45 + 65, 12/100 + 120, 16/10, 16/25 +45, 16/50 + 70 diameter (mm) / usable length(mm)



GalvanisedSizes: 6/5, 6/10, 6/30, 8/5, 8/10 + 23, 8/30 + 43, 8/50 + 63, 8/100 + 113, 10/5, 10/15+ 23, 10/35 + 43, 10/50 + 58, 10/100 + 108, 10/140 + 148, 10/160 + 168, 12/5,12/15 + 35, 12/30 + 50, 12/45 + 65, 12/100 + 120, 16/10, 16/25 + 45, 16/50 + 7016/100 20/10, 20/20, 20/60, 20/120, 20/250, 12/80+100 GS, 12/100+120 GS,12/120+140 GS, 12/140+160 GS, 12/160+180 GS, 12/200+220 GS, 12/250+270 GS,16/100+120 GS, 16/140+160 GS, 16/160+180 GS, 16/200+220 GS, 16/250+270 GS,16/300+320 GS, 8 x 75 H, 8 x 95 H diameter (mm) / usable length (mm)

FWB WallboltsThe segmented steel expander shield is assembled ready for use with bolts orthreaded rods of appropriate diameter.

High Performance Steel AnchorsType Size QuantityFWB S Wallbolt – shield only 6, 8, 10, 12, 16 & 20 mm 10, 25, 50FWB L Wallbolt – loose bolt type 6, 8, 10, 12, 16 & 20 mm 10, 25, 50FWB P Wallbolt – projecting bolt type 6, 8, 10, 12, 16 & 20 mm 10, 25, 50FWB H Wallbolt – hook bolt type 12, 14, 16 & 20 mm 25, 50FWB E Wallbolt – eye bolt type 6, 8, 10, 12 &16 mm 10, 25, 50

FSA sleeve anchorsFSA-S / FSA-BLight sleeve anchor for push-through installation. Whenthe hexagon nut or bolt is tightened, the tapered bolt ispulled into the expansion sleeve and expands it againstthe hole wall.Sizes: 8/15, 8/40, 8/65, 10/10, 10/35, 10/60, 12/10, 12/25, 12/50 diameter (mm) / usable length(mm)

FH high performance anchorsFH-H / FH-B / FH-SHeavy-duty sleeve anchor for push-through installation. When the hexagon nut or screw istightened, the cone is pulled into the expansion sleeve and expands tensioning it against thehole wall. A4 stainless steel version for outdoor use and in damp conditions (not part of theapproval).

Sizes: (FH-H) 10/10, 10/25, 10/50, 12/25, 12/50, 15/25, 15/50, 18 x 80/25, 18 x 80/50, 18 x100/25, 18 x 100/50, 24/25, 24/50 diameter (mm) / usable length (mm)

Sizes: (FH-B) 10/10, 10/25, 10/50, 12/-, 12/10, 12/25, 12/50, 12/100, 15/-, 15/10, 15/25, 15/50,15/100, 18 x 80/-, 18 x 80/10, 18 x 80/25, 18 x 80/50, 18 x 80/100, 18 x 100/25, 18 x 100/50, 18x 100/100, 24/-, 24/10, 24/25, 24/50, 24/100, 28/30, 28/60, 32/30, 32/60 diameter (mm) / usablelength (mm)

A4Sizes: (FH-B / FH-S) 10/10, 12/10, 12/25, 15/10, 15/25, 15/50, 18 x 100/25, 18 x 100/50diameter (mm) / usable length (mm)

GalvanisedSizes: (FH-B / FH-S) 10/-, 10/10, 10/25, 10/50, 12/-, 12/10, 12/25,12/50, 15/-, 15/10, 15/25, 15/50, 18 x 80/-, 18 x 80/10, 18 x 80/25,18 x 80/50, 18 x 100/25, 18 x 100/50, 24/10, 24/25, 24/50 diameter(mm) / usable length (mm)Sizes: (FH-B / FH-S): 12/10, 12/50, 15/10, 15/50 diameter (mm) /usable length (mm)


Acc

esso

ries

,Too

lsan

dS

afet

yEq

uipm

ent


Safety & Personal Protection Equipment

Fall Arrest Blocks – Lightweight device provides protection from falls fromheights, whilst providing maximum freedom of movement across a largework area. Maximum working load 136Kg.

Gloves – A range of gloves offering chemical and mechanical protection.

Harnesses – Choose from single 'D' rear attachment, suitable for fall arrestand recovery, or front and rear 'D' attachments for additional flexibility.

Hazard Barrier Tape – Strong durable tape non-adhesive PVC. Used formarking out or cordoning off areas. Highly contrasting coloured stripesserve as a clear visual warning.

Hazard Tape – Complementing the Hazard Warning Barrier Tape, this self-adhesive PVC tape is also available in Black/Yellow and Red/White.

Lanyards – Available with a karabiner at each end, or with one karabinerand one Scaffold Hook attachment for greater anchorage flexibility.

Plastic Barrier Fence & Pins – The fencing pin is an essential fixing forbarrier tapes, hazard warning pennants, barrier fencing. Barrier fencing ismanufactured from tough polyethylene in heavy duty mesh, it is available inrolls 1m high by 50m long, coloured bright orange for high visibility.

Re-bar Protection Caps – Have been developed to protect workers fromthe serious injury that starter bars can cause.

High Visibility Wastecoats – A range of sizes are available in high visibilityyellow waistcoats, 100% knitted polyester, with one reflective band andbraces.

Hard Hats – Multi purpose, tough HDPE yellow helmet complete with rainchannel.

Semi-disposable Dust Mask - Designed to be used until the filters areexhausted, or within 28 days after breaking the seal on the bag, whicheveroccurs first.

Safety

Ancillaries

Buckets STD and Flexitubs - measuring/mixing bucket, ideal for most cementitiousproducts.

Watering Cans and Barrel Taps, Measuring Jugs and Funnels

Degreasers – Degreaser that lifts Dirt and Grime from Components

Site start up pack - Ask your local branch for specific pack contents

Protection Boards – Protection of waterproof membranes against mechanical damage,pedestrian or light vehicular traffic and abrasion caused by backfilling and concreteplacement.

Line & Spot Markers – High definition, fast drying, spot marking paint is ideal for mostapplications where spot markings are required to last at least three months, and colour codedfor utility and cable companies, 750ml cans.

N.B. Not all tools, fixings or accessories are held in stock, please contact your local branch foravailability. Pictures are for guidance only and may not reflect stocked items.

Ancillaries

Help us to help youAs part of our ongoing commitment to our customers we regularly update our database tomake sure we have the right contact information for you.

Please advise us immediately if you have any changes to your details or if the details we holdon you are incorrect in any way. Please photocopy the reader response card below to keep usup to date.

In addition, if you would like to receive updates from us via text or email, please let us knowyour mobile phone number and email address.

We always welcome your views and feedback, so do not hesitate to contact us in any of thefollowing ways:• Fax Reader response card below to 01234 360817• Email [email protected]• Telephone 01234 268452

If your contact details are incorrect or you would like to recommend a colleague to receive thecatalogue or our half yearly newsletter please tick the appropriate box and complete the formbelow.

Update my contact details as below: ■ Send another copy of the catalogue to: ■

Title Mr ■ Mrs ■ Ms ■ Other ■

First Name

Surname

Job title

Company

Address

Postcode

Tel Mobile Fax

Email

Signature Date

Feedback/Comments

■ If you would like to receive updates in the future on our products and services by email ormobile phone please tick the box and ensure that you add the information above.

Privacy statement: We may contact you from time to time to inform you about offers we think may be of interest to you. If

you do not wish to receive further information from us about Support Site services please tick the box or alternatively send an

email to us at [email protected] and we will remove your details from our mailing list. ■

Bedford4, Caxton Park, Caxton Road, Bedford. MK41 0TYTel: 01234 268427 Fax: 01234 360057Email: [email protected]

Barking4 Thames Road, Barking, Essex. IG11 0HZTel: 0208 591 9991Fax: 0208 591 9992Email: [email protected]

BirminghamPedmore Road, Dudley, Birmingham. DY2 0RNTel: 01384 472250 Fax: 01384 472251Email: [email protected]

Cardiff1 Quay Point, Ocean Way, Ocean Park,Cardiff. CF24 5HFTel: 029 20 465553Fax: 029 20 493089Email: [email protected]

GatesheadUnit A389, Western Avenue, Team Valley Trading Estate, Gateshead. NE11 0SZ Tel: 0191 487 4983Fax: 0191 491 5790Email: [email protected]

GlasgowUnit 1, Moor Park Ind. Estate, Govan,Glasgow. G51 2HFTel: 0141 445 3444Fax: 0141 445 1313Email: [email protected]

Leeds7 Ring Road, Lower Wortley, Leeds. LS12 6ABTel: 0113 279 8287Fax: 0113 279 8285Email: [email protected](relocating late 2006)

LoughboroughOld Station Close, Shepshed,Loughborough, Leicestershire, LE12 9JNTel: 01509 502895Fax: 01509 502871Email: [email protected]

ManchesterParkway Centre, End of Longbridge Road, Trafford Park, Manchester. M17 1SNTel: 0161 872 5464Fax: 0161 872 5399Email: [email protected]

PlymouthUnit 38, Central Avenue, Lee Mill,Plymouth. PL21 9PETel: 01752 894965Fax: 01752 895896Email: [email protected]

Swindon6/7 Bramble Road, Techno Trading Estate,Swindon. SN2 6HBTel: 01793 616666Fax: 01793 617777Email: [email protected]

Central Office4, Caxton Park, Caxton Road, Bedford. MK41 0TY Tel: 01234 268452 Fax: 01234 360817

An Company

Support Site Brochure

Documents

Transcript of Support Site Brochure