supershield 711
1
FLUX CORED WELDING WIRE AWS : A5.20 E 71T-1 ASME : SFA 5.20 E71T-1 SUPERSHIELD 711 JIS : Z3313 YFW-C50DR CHEMICAL COMPOSITION ( % ) ACCORDING TO AWS: C Si Mn P S V Cu ≤ 0.18 ≤ 0.90 ≤ 1.75 ≤ 0.03 ≤ 0.03 ≤ 0.08 ≤ 0.35 MECHANICAL PROPERTIES ACCORDING TO AWS: I. V (J) YP (N/mm 2 ) T.S (N/mm 2 ) EL (%) 0 o C - 18 o C ≥ 400 ≥ 480 ≥ 22 - ≥ 27 J APPLICATIONS & CHARACTERISTICS Butt, Fillet Welding of mild steel & 50 kgf/mm 2 high tensile strength of structures such as buildings, bridges, ships and industrial machinery. Supershield 711 is titania (rutile) type flux cored wire used with CO 2 or 75% Ar-25% CO 2 shielding gas and it contributes to the reduction of welding cost. It provides excellent usability with stable arc, less spattering, good bead appearance , better slag removal. For mechanized welding of H-Fillet this wire is an excellent choice, as it meets the requirement of superior wire feeding properties combined with high deposition efficiency and very good resistance to blow-hole. The quantity of spatter is almost free compared with a solid wire, therefore cost can be saved. DIAMETERS AVAILABLE & RECOMMENDED CURRENT (DCEP) Wire dia. (mm) 1.2 1.6 Flat, H-Fillet Amp. (A) Volt. (V) 150 ~ 320 22 ~ 34 180 ~ 450 25 ~ 38 V-up Volt. (V) Amp. (A) 140 ~ 250 22 ~ 30 180 ~ 280 24 ~ 32 V-down Amp. (A) Volt. (V) 200 ~ 300 22 ~ 34 240 ~ 320 25 ~ 36 Over Head (Optimum Condition) Volt. (A) Amp. (V) 210 ~ 230 22 ~ 26 230 ~ 250 24 ~ 30 APPROVAL ABS : 2SAH15, 2YSAH15 GL : 2YH15S NK : KSW2G ( C ) H, KSW52G ( C ) H BV : SA2M, SA2YMH KR : RSW2G(C) H, RSW52G (C) H CWB : E4901T-9-CH (W48.5 M 1990) DNV : II YMS (H15) LR : 2S, 2YSH15 TUV : T 46 0 P C/M 1 EN 758 STANDARD PACKAGING : 15 KG PLASTIC SPOOL
-
Upload
ajesh-kumar-muraleedharan -
Category
Documents
-
view
222 -
download
4
description
Supershiel data
Transcript of supershield 711
FLUX CORED WELDING WIRE AWS : A5.20 E 71T-1 ASME : SFA 5.20 E71T-1
SUPERSHIELD 711 JIS : Z3313 YFW-C50DR
CHEMICAL COMPOSITION ( % ) ACCORDING TO AWS:
C Si Mn P S V Cu
≤ 0.18
≤ 0.90
≤ 1.75
≤ 0.03
≤ 0.03
≤ 0.08
≤ 0.35
MECHANICAL PROPERTIES ACCORDING TO AWS:
I. V (J) YP (N/mm2)
T.S (N/mm2)
EL (%) 0 oC - 18 oC
≥ 400 ≥ 480 ≥ 22 - ≥ 27 J
APPLICATIONS & CHARACTERISTICS
Butt, Fillet Welding of mild steel & 50 kgf/mm2 high tensile strength of structures such as buildings, bridges, ships and industrial machinery.
Supershield 711 is titania (rutile) type flux cored wire used with CO2 or 75% Ar-25% CO2 shielding gas and it contributes to the reduction of welding cost. It provides excellent usability with stable arc, less spattering, good bead appearance , better slag removal.
For mechanized welding of H-Fillet this wire is an excellent choice, as it meets the requirement of superior wire feeding properties combined with high deposition efficiency and very good resistance to blow-hole.
The quantity of spatter is almost free compared with a solid wire, therefore cost can be saved.
DIAMETERS AVAILABLE & RECOMMENDED CURRENT (DCEP)
Wire dia. (mm) 1.2 1.6 Flat,
H-Fillet Amp. (A) Volt. (V)
150 ~ 320 22 ~ 34
180 ~ 450 25 ~ 38
V-up Volt. (V) Amp. (A)
140 ~ 250 22 ~ 30
180 ~ 280 24 ~ 32
V-down Amp. (A) Volt. (V)
200 ~ 300 22 ~ 34
240 ~ 320 25 ~ 36
Over Head (Optimum Condition) Volt. (A) Amp. (V)
210 ~ 230
22 ~ 26
230 ~ 250
24 ~ 30
APPROVAL ABS : 2SAH15, 2YSAH15 GL : 2YH15S NK : KSW2G ( C ) H, KSW52G ( C ) H BV : SA2M, SA2YMH KR : RSW2G(C) H, RSW52G (C) H CWB : E4901T-9-CH (W48.5 M 1990) DNV : II YMS (H15) LR : 2S, 2YSH15 TUV : T 46 0 P C/M 1 EN 758
STANDARD PACKAGING : 15 KG PLASTIC SPOOL
