SUNRAIN SOLAR HEATPIPE COLLECTOR

TZ58/1800- R SERIES

Welcome to the SUNRAIN Vaccum Tube Solar Collector!

Vacuum tube solar collectors are amongst the most efficient and most costly types ofsolar collectors. These collectors are best suited for moderate temperature applicationswhere the demand temperature is 50-95C. Vacuum tube solar collectors have aselective absorber for collecting sunlight that is in vacuum-sealed tube, so the thermallosses are very low even in cold climates.

Applications of vacuum tube collectors include heating of domestic and commercialhot water, buildings, and indoor swimming pools. Due to their ability to deliver hightemperatures efficiently another potential application is for the cooling of buildings byregenerating refrigeration cycles.

Our solar collector has been manufactured to the very highest standards, and willprovide you with many years of service, with the minimum of maintenance required.This brochure explains how it works, and provides information of a solar waterheating installation.

Before assembly and installation, please read this brochure carefully.

CONTENTS

1. STRUCTURE2. COMPONENTS3. TECHNICAL DATA4. PACKING DETAIL5. MOUNTING ROOF BRACKET SYSTEM6. COLLECTOR DIMENSION7. WARRANTY8. COLLECTOR IN SYSTEM9. PROJECT SUGGESTION10. CONTACT INFORMATION

1. STRUCTURETZ58/1800-10-15RTZ58/1800-10RWITH STANDTZ58/1800-20-30RTZ58/1800-30RWITH STAND

R1 series

R2 series

2. COMPONENTS

VACUUM TUBE 58/1800mm, selective absorber AL/N-AL

HEAT PIPE, SILICON COTTON STOPPLE AND ALUMINUM FINdia. 24mm, length 9mm, copper

MANIFOLDAluminum 1”

INSULATION CFC Polyurethane foam& Rock Wool

TAIL STOCKABS Plastic (UV stabilized)

FRAME

STAND (OPTIONAL)Aluminum or Stainless steel 304, 30 or 45°

3. TECHNICAL DATA

Efficiency Curve

The calculated parameters are based on following areas:

aperture area of 0.936 m absorber area of 0.808 m :η0a = 0.734 η0A = 0.850

a1a = 1.529 W/m2 K a1A = 1.771 W/m2 K

a2a = 0.0166 W/m2 K2 a2A = 0.0192 W/m2 K2

TZ58-1800-10R

TZ58-1800-15R

TZ58-1800-20R

TZ58-1800-25R

TZ58-1800-30R

Total area 1.1715 ㎡ 2.563 ㎡ 3.377 ㎡ 4.121 ㎡ 4.901 ㎡

Collectordepth

0.189 m 0.189 m 0.189 m 0.189 m 0.189 m

Aperturearea

0.936 ㎡ 1.395 ㎡ 1.860 ㎡ 2.326 ㎡ 2.791 ㎡

Absorberarea

0.808 ㎡ 1.206 ㎡ 1.607 ㎡ 2.009 ㎡ 2.411 ㎡

Weightempty

39.6 kg 54.8 kg 73 kg 91.5 kg 106 kg

Volume ofthe fluid

0,7 l (MS) 1,065 l (MS) 1,4 l (MS) 1.85 l (MS) 2,3 l (MS)

4. PACKING DETAIL

TZ58/1800-20, 25, 30R with flat roof stand (For example 25R)

TZ58/1800-20, 25, 30R without flat roof stand (For example 25R)

TZ58/1800-10, 15R with flat roof stand (For example 15R)

NAME DESCRIPTION

All-Glass Evacuated SolarCollector Tube (with heat pipe)

15 PCS/CTN

Solar Collector with heat pipe(with stand)

1 SET/CTN1 Manifold header, 25 tail stocks, 1 tail stock track, 3 back

support bars, 3 joints

Solar Collector Frame (withstand)

1 SET/CTN3 front tracks, 3 rear tracks, 3 up bars, 3 bottom assistant bars,

4 cross bars

NAME DESCRIPTION

All-Glass Evacuated SolarCollector Tube (with heat pipe)

15 PCS/CTN

Solar Collector with heat pipe1 SET/CTN

1 Manifold header, 25 tail stocks, 1 tail stock track, 3 backsupport bars, 3 joints

NAME DESCRIPTION

All-Glass Evacuated SolarCollector Tube (with heat pipe)

15 PCS/CTN

Solar Collector with heat pipe(with stand)

1 SET/CTN1 Manifold header, 15 tail stocks, 1 tail stock track, 3 back

support bars, 2 joints

Solar Collector Frame (withstand)

1 SET/CTN2 front tracks, 2 rear tracks, 2 up bars, 2 bottom assistant bars,

2 cross bars

TZ58/1800-10, 15R without flat roof stand (For example 15R)

NAME DESCRIPTION

All-Glass Evacuated SolarCollector Tube (with heat pipe)

15 PCS/CTN

Solar Collector with heat pipe1 SET/CTN

1 Manifold header, 15 tail stocks, 1 tail stock track, 3 backsupport bars, 2 joints

5. MOUNTING ROOF BRACKET INSTALLATION

6. COLLECTOR DIMENSIONS

10R 2010*854*189 mm15R 2010*1275*189 mm20R 2010*1680*189 mm25R 2010*2050*189 mm30R 2010*2420*189 mm

7. COLLECTOR IN SYSTEM

8. PROJECT SUGGESTION

Pressure Drop

Sample Project

Swimming pool

9. WARRANTY

No liability is accepted for incorrect use, unauthorized changes to the assembly components, or theresulting con-sequences.The warranty for the collector lasts for 3years and 1 years for the accessories.All information and instructions in this manual refer to the current state of development. Pleasealways use the respective assembly instructions supplied with the collectors. Figures andillustrations used. Due to the possibility of setting and printing errors, and to the need forcontinuous technical change, please understand that we cannot accept liability for the correctnessof the data. The current version of the General Terms of Business applies. All photographs used arefor illustrative purposes only. These assembly instructions contain proprietary informationprotected by copyright laws. All rights and changes to these assembly instructions are reserved.

10. CONTACT INFORMATION

JIANGSU SUNRAIN SOLAR ENERGY CO., LTD.Ninghai Industry Zone, Lianyungang, ChinaContact: Eddy ChengTel: +86 518 8505 1886, +86 518 8505 1806Fax: +86 518 8505 1808Web: http://en.sunrain.comE-mail:eddy@sunrain.com