SUNRAIN SOLAR HEAT PIPECOLLECTOR - Power Zone · Welcome to the SUNRAIN Vaccum Tube Solar...
Transcript of SUNRAIN SOLAR HEAT PIPECOLLECTOR - Power Zone · Welcome to the SUNRAIN Vaccum Tube Solar...
SUNRAIN SOLAR HEATPIPE COLLECTOR
TZ58/1800- R SERIES
Welcome to the SUNRAIN Vaccum Tube Solar Collector!
Vacuum tube solar collectors are amongst the most efficient and most costly types ofsolar collectors. These collectors are best suited for moderate temperature applicationswhere the demand temperature is 50-95C. Vacuum tube solar collectors have aselective absorber for collecting sunlight that is in vacuum-sealed tube, so the thermallosses are very low even in cold climates.
Applications of vacuum tube collectors include heating of domestic and commercialhot water, buildings, and indoor swimming pools. Due to their ability to deliver hightemperatures efficiently another potential application is for the cooling of buildings byregenerating refrigeration cycles.
Our solar collector has been manufactured to the very highest standards, and willprovide you with many years of service, with the minimum of maintenance required.This brochure explains how it works, and provides information of a solar waterheating installation.
Before assembly and installation, please read this brochure carefully.
CONTENTS
1. STRUCTURE2. COMPONENTS3. TECHNICAL DATA4. PACKING DETAIL5. MOUNTING ROOF BRACKET SYSTEM6. COLLECTOR DIMENSION7. WARRANTY8. COLLECTOR IN SYSTEM9. PROJECT SUGGESTION10. CONTACT INFORMATION
1. STRUCTURETZ58/1800-10-15RTZ58/1800-10RWITH STANDTZ58/1800-20-30RTZ58/1800-30RWITH STAND
R1 series
R2 series
2. COMPONENTS
VACUUM TUBE 58/1800mm, selective absorber AL/N-AL
HEAT PIPE, SILICON COTTON STOPPLE AND ALUMINUM FINdia. 24mm, length 9mm, copper
MANIFOLDAluminum 1”
INSULATION CFC Polyurethane foam& Rock Wool
TAIL STOCKABS Plastic (UV stabilized)
FRAME
STAND (OPTIONAL)Aluminum or Stainless steel 304, 30 or 45°
3. TECHNICAL DATA
Efficiency Curve
The calculated parameters are based on following areas:
aperture area of 0.936 m absorber area of 0.808 m :η0a = 0.734 η0A = 0.850
a1a = 1.529 W/m2 K a1A = 1.771 W/m2 K
a2a = 0.0166 W/m2 K2 a2A = 0.0192 W/m2 K2
TZ58-1800-10R
TZ58-1800-15R
TZ58-1800-20R
TZ58-1800-25R
TZ58-1800-30R
Total area 1.1715 ㎡ 2.563 ㎡ 3.377 ㎡ 4.121 ㎡ 4.901 ㎡
Collectordepth
0.189 m 0.189 m 0.189 m 0.189 m 0.189 m
Aperturearea
0.936 ㎡ 1.395 ㎡ 1.860 ㎡ 2.326 ㎡ 2.791 ㎡
Absorberarea
0.808 ㎡ 1.206 ㎡ 1.607 ㎡ 2.009 ㎡ 2.411 ㎡
Weightempty
39.6 kg 54.8 kg 73 kg 91.5 kg 106 kg
Volume ofthe fluid
0,7 l (MS) 1,065 l (MS) 1,4 l (MS) 1.85 l (MS) 2,3 l (MS)
4. PACKING DETAIL
TZ58/1800-20, 25, 30R with flat roof stand (For example 25R)
TZ58/1800-20, 25, 30R without flat roof stand (For example 25R)
TZ58/1800-10, 15R with flat roof stand (For example 15R)
NAME DESCRIPTION
All-Glass Evacuated SolarCollector Tube (with heat pipe)
15 PCS/CTN
Solar Collector with heat pipe(with stand)
1 SET/CTN1 Manifold header, 25 tail stocks, 1 tail stock track, 3 back
support bars, 3 joints
Solar Collector Frame (withstand)
1 SET/CTN3 front tracks, 3 rear tracks, 3 up bars, 3 bottom assistant bars,
4 cross bars
NAME DESCRIPTION
All-Glass Evacuated SolarCollector Tube (with heat pipe)
15 PCS/CTN
Solar Collector with heat pipe1 SET/CTN
1 Manifold header, 25 tail stocks, 1 tail stock track, 3 backsupport bars, 3 joints
NAME DESCRIPTION
All-Glass Evacuated SolarCollector Tube (with heat pipe)
15 PCS/CTN
Solar Collector with heat pipe(with stand)
1 SET/CTN1 Manifold header, 15 tail stocks, 1 tail stock track, 3 back
support bars, 2 joints
Solar Collector Frame (withstand)
1 SET/CTN2 front tracks, 2 rear tracks, 2 up bars, 2 bottom assistant bars,
2 cross bars
TZ58/1800-10, 15R without flat roof stand (For example 15R)
NAME DESCRIPTION
All-Glass Evacuated SolarCollector Tube (with heat pipe)
15 PCS/CTN
Solar Collector with heat pipe1 SET/CTN
1 Manifold header, 15 tail stocks, 1 tail stock track, 3 backsupport bars, 2 joints
5. MOUNTING ROOF BRACKET INSTALLATION
6. COLLECTOR DIMENSIONS
10R 2010*854*189 mm15R 2010*1275*189 mm20R 2010*1680*189 mm25R 2010*2050*189 mm30R 2010*2420*189 mm
7. COLLECTOR IN SYSTEM
8. PROJECT SUGGESTION
Pressure Drop
Sample Project
Swimming pool
9. WARRANTY
No liability is accepted for incorrect use, unauthorized changes to the assembly components, or theresulting con-sequences.The warranty for the collector lasts for 3years and 1 years for the accessories.All information and instructions in this manual refer to the current state of development. Pleasealways use the respective assembly instructions supplied with the collectors. Figures andillustrations used. Due to the possibility of setting and printing errors, and to the need forcontinuous technical change, please understand that we cannot accept liability for the correctnessof the data. The current version of the General Terms of Business applies. All photographs used arefor illustrative purposes only. These assembly instructions contain proprietary informationprotected by copyright laws. All rights and changes to these assembly instructions are reserved.
10. CONTACT INFORMATION
JIANGSU SUNRAIN SOLAR ENERGY CO., LTD.Ninghai Industry Zone, Lianyungang, ChinaContact: Eddy ChengTel: +86 518 8505 1886, +86 518 8505 1806Fax: +86 518 8505 1808Web: http://en.sunrain.comE-mail:[email protected]