Summary Datasheet

1Q 2015

Previously the NanoNID® & antMODULETM

Network Performance Modules

Accedian Network Performance Modules provide an innovative way to add key Performance Assurance features such as Remote Troubleshooting, Performance Monitoring (PM), and Connectivity Fault Management (CFM) to deployed Carrier Ethernet & IP Services.

The ant and Nano Modules employ a full featured FPGA which can do active Ethernet

testing and traffic generation, in a compact, power-efficient footprint - without compromising

performance or precision. This makes Accedian Modules an ideal fit for cost and space-

sensitive applications where performance is a key service differentiator.

Sharing the same firmware and programmable, FPGA-based hardware architecture, the

ant and Nano can be mixed and matched to adapt to site-specific media requirements.

Key Applications

The densification of service endpoints demands cost-effective QoS visibility with the

accuracy and low-latency performance unmatched by merchant silicon. Wire-speed

processing ensures peak performance in demanding small cell / LTE backhaul, and

business services vCPE applications.

The Modules enhance existing legacy network elements, and enrich green field

deployments with added performance assurance functionality, saving truck rolls and driving

down operational expenses to fit cost-competitive business models. Modules can be

installed in-line or out, allowing service providers to upgrade legacy networks without

downtime.

ant & Nano Performance Modules interoperate with the full line of Accedian Performance

Elements, Actuators, and programmable Platforms to deliver a scalable core-to-edge

performance-assured networking solution tailored to your applications.

Virtualized, programmable instrumentation for QoS monitoring, OAM & turn up testing in compact, cost-effective Modules:

• Low-latency, wire-speed

packet processing for

uncompromised performance

• Zero-touch Plug & Go™ auto

provisioning for customer

self-install

• Full line-rate loopback

support for popular third-party

test sets, 802.3ah & Y.1731

OAM standards works with

existing infrastructure

• RFC-2544 & Y.1731 Service

Activation Testing - including

multi-flow traffic generation -

eliminates the need for on-

site testing

• Standards-based+ Layer 2 &

3 TWAMP Light (Y.1564)

performance monitoring for

core-to-edge QoS visibility

• DOCSIS-friendly

management integration for

easy BSoD deployments.

• NFV-extensible feature set

• 50+ year MTBF

Benefits

Nano & ant

Summary Datasheet • Nano & ant • 1Q 2015

Model Description Part

Number

ANT-1000-TX

10/100/1000 Mbps 6VDC Ethernet Performance-Monitoring Demarcation Device

• One ant 1000 TX unit • DC 6V (power supply sold separately, see below)

772-000

ANT-1000-TX

10/100/1000 Mbps 6VDC Ethernet Performance-Monitoring Demarcation Device with DHCP enabled

• One ant 1000 TX unit

• DC 6V (power supply sold separately, see below)

772-002

Single AC Power Options

APS-6V-NA AC/DC 6V Power Supply Wall Adapter (North America) 720-600

APS-6V-EUR AC/DC 6V Power Supply Wall Adapter (Europe/Russia) 720-601*

APS-6V-UK AC/DC 6V Power Supply Wall Adapter (United Kingdom) 720-602*

APS-6V-AUS AC/DC 6V Power Supply Wall Adapter (Australia/New Zealand) 720-603*

AES-2-WALL Wall mount kit with cable support; fits one ant unit 709-006

*Available soon

Speed Wavelength Media Type Rated

Distance Temperature

Hardened DHCP

Enabled Part

Number

1 Gbps 850nm MMF 550 m • 771-101

1 Gbps 850nm MMF 550 m • • 771-102

1 Gbps 1310nm SMF 10 km • 770-101

1 Gbps 1310nm SMF 10 km • • 770-102

1 Gbps 1310nm SMF 10 km • • 770-110*

1 Gbps 1310nm SMF 10 km • 770-111*

1 Gbps 850nm MMF 550 m • • 771-110*

1 Gbps 850nm MMF 550 m • 771-111*

Note

*These SKUs are Ericsson-coded, which means they only work in the MBS radio and the 3000 series radio. They have been configured with a special security code recognized by Ericsson, which identifies them as genuine Ericsson hardware. Currently, only these two Ericsson radios that have been identified as compatible with these SKUs; there may be more, however.

Power & Connectivity

Connector Type Duplex LC interface

Interface Type ANN-1000-CX: IEEE 802.3z 1000 Base-LX

ANN-1000-CT: IEEE 802.3z 1000 Base-SX

Physical Specifications

Dimensions (nano only) 2.8” L x 8” W x 0.55” H in. (28 L x 80 W x 55 H mm)

Time to Initialize (nano only) 300ms

Environmental

Operating Temperature 0°C to +40°C

Clock Rate 400kHz

Storage Temperature -30°C to +85°C

Operating/Storage Humidity 5-85% RH, non-condensing

Regulatory and Certification

CFR Title 21, Parts 1040.10 and 1040.11 Compliant

FCC Part 15 Class A Compliant

INF-8074i Rev 1.0 Compliant

SFF-8472 Rev 11.0 Compliant

IEC 60980-1 2nd Edition Compliant

IEC 60825-1 2nd Edition Laser Class 1 Compliant

Contact Us

For detailed specifications, ask for a copy of our

Capabilities Matrix. Our engineers can help you

select the right unit for your application:

Accedian.com/Contact

Power6 VDC for

AC Adapter

Port 1 Status Power20-57 VDC

Auto-Ranging Input

Power & Connectivity

DC Power Input 6Vdc, 0.85A max, 2.5W max

Physical Specifications

Dimensions (ant only) 1.15” H x 2.3” W x 5.3” D in. (30 H x 58 W x 135 D mm)

Weight (ant only) 115 g or 4 oz.

Environmental

Operating Temperature 0°C to +40°C

Maximum Altitude 2000 meters above sea level

Storage Temperature -40°C to +70°C

Operating/Storage Humidity 20-80% RH, non-condensing

Regulatory and Certification

FCC Part 15 Class B, ICES-003 Class B

Specifications ant

Nano

© 2015 Accedian Networks Inc. All rights reserved. See Accedian/legal for trademarks. Specifications may change without notice. Some certifications may be pending, contact Accedian for details.

1 GbEOptical

LC

SM (Single-Mode) orMM (Multi-Mode)

Dual MACAddress

Nano Models (SFP Variants)

ant Models & Accessories