Summary Datasheet ant - Accedian · The ant Module employs a fully-featured FPGA capable of active...
3
Summary Datasheet 3Q 2018 Previously the antMODULE TM Network Performance Modules Accedian Network Performance Modules provide an innovative way to add key performance assurance features addressing the full end-to-end service lifecycle such as service activation testing (SAT), continuous performance monitoring, remote troubleshooting, and connectivity fault management (CFM) to deployed Carrier Ethernet and IP services. The ant Module employs a fully-featured FPGA capable of active Ethernet testing and traffic generation, in a compact, power-efficient footprint—without compromising performance, scalability, and precision. This makes Accedian Modules an ideal fit for cost and space-sensitive applications, where performance is a key service differentiator. The ant with advanced features support leverages the same capabilities as the first generation device, and is built with the ability to support more advanced features such as traffic management (regulators, QoS, policing, VLAN tag manipulation), fine-grained flow metering (bandwidth monitoring), and FlowBROKER TM —the unique remote packet capture functionality available with the SkyLIGHT VCX solution. Key Applications The densification of service endpoints demands cost-effective QoS visibility with the accuracy and low-latency performance unmatched by merchant silicon. Wire-speed processing ensures peak performance in demanding small cell / LTE backhaul, and business services vCPE applications. The ant Modules enhance existing legacy network elements, and enrich green field deployments with added performance assurance functionality, saving truck rolls and driving down operational expenses to fit cost-competitive business models. The Modules can be installed in-line or out, allowing service providers to upgrade legacy networks without downtime or configuration changes. With the additional capabilities provided in the next-generation ant, operators can gain deeper insights about the performance of their network. For example, with FlowBroker, operators can now obtain further details about the QoE of the streaming media services (YouTube, Netflix, etc.) they provide to their end customers. Sharing the same firmware and field-upgradable FPGA-based hardware architecture, ant and Nano Modules interoperate with each other, as well as all Accedian performance elements, actuators, virtual controllers, and programmable platforms to deliver a scalable core-to-edge performance-assured networking solution tailored to your applications. Virtualized, programmable instrumentation for QoS monitoring, OAM, and turn up testing in compact, cost-effective Modules: • Low-latency, wire-speed packet processing for uncompromised performance • Zero-touch Plug & Go™ auto provisioning for customer self- install • Full line-rate loopback support for popular third-party test sets, 802.3ah & Y.1731 OAM standards works with existing infrastructure • Service activation testing: RFC-2544 (generation and reflection) & Y.1564 (reflection and generation*) including multi-flow traffic generation which eliminates the need for on-site testing • Fine-grained Layer 2 and Layer 3 flow metering • Standards-based+ Layer 2 & 3 (IPv4 and IPv6) TWAMP Lite (RFC-5357)–reflection and NFV-based initiation performance monitoring for core-to-edge QoS visibility • IPv4 & IPv6 management • DOCSIS-friendly management integration for easy BSoD deployments • NFV-extensible feature set Benefits ant ant (Advanced Features) * Future capability ant
Transcript of Summary Datasheet ant - Accedian · The ant Module employs a fully-featured FPGA capable of active...
Summary Datasheet
3Q 2018
Previously the antMODULETM
Network Performance Modules
Accedian Network Performance Modules provide an innovative way to add key performance assurance features addressing the full end-to-end service lifecycle such as service activation testing (SAT), continuous performance monitoring, remote troubleshooting, and connectivity fault management (CFM) to deployed Carrier Ethernet and IP services.
The ant Module employs a fully-featured FPGA capable of active Ethernet testing and traffic generation, in a compact, power-efficient footprint—without compromising performance, scalability, and precision. This makes Accedian Modules an ideal fit for cost and space-sensitive applications, where performance is a key service differentiator.
The ant with advanced features support leverages the same capabilities as the first generation device, and is built with the ability to support more advanced features such as traffic management (regulators, QoS, policing, VLAN tag manipulation), fine-grained flow metering (bandwidth monitoring), and FlowBROKERTM—the unique remote packet capture functionality available with the SkyLIGHT VCX solution.
Key Applications The densification of service endpoints demands cost-effective QoS visibility with the accuracy and low-latency performance unmatched by merchant silicon. Wire-speed processing ensures peak performance in demanding small cell / LTE backhaul, and business services vCPE applications.
The ant Modules enhance existing legacy network elements, and enrich green field deployments with added performance assurance functionality, saving truck rolls and driving down operational expenses to fit cost-competitive business models. The Modules can be installed in-line or out, allowing service providers to upgrade legacy networks without downtime or configuration changes.
With the additional capabilities provided in the next-generation ant, operators can gain deeper insights about the performance of their network. For example, with FlowBroker, operators can now obtain further details about the QoE of the streaming media services (YouTube, Netflix, etc.) they provide to their end customers.
Sharing the same firmware and field-upgradable FPGA-based hardware architecture, ant and Nano Modules interoperate with each other, as well as all Accedian performance elements, actuators, virtual controllers, and programmable platforms to deliver a scalable core-to-edge performance-assured networking solution tailored to your applications.
Virtualized, programmable instrumentation for QoS monitoring, OAM, and turn up testing in compact, cost-effective Modules:
• Low-latency, wire-speed packet processing for uncompromised performance
• Zero-touch Plug & Go™ auto provisioning for customer self-install
• Full line-rate loopback support for popular third-party test sets, 802.3ah & Y.1731 OAM standards works with existing infrastructure
• Service activation testing: RFC-2544 (generation and reflection) & Y.1564 (reflection and generation*) including multi-flow traffic generation which eliminates the need for on-site testing
• Fine-grained Layer 2 and Layer 3 flow metering
• Standards-based+ Layer 2 & 3 (IPv4 and IPv6) TWAMP Lite (RFC-5357)–reflection and NFV-based initiation performance monitoring for core-to-edge QoS visibility
• IPv4 & IPv6 management
• DOCSIS-friendly management integration for easy BSoD deployments
• NFV-extensible feature set
•
Benefits
ant
ant (Advanced Features)
* Future capability
ant
Summary Datasheet • ant • 3Q 2018
Model Speed Power Supply Ports Advanced
Features DHCP
Enabled CLEI Label
Bypass for
Electrical Ports
Temp. Hardened
Part Number
100/1000 Mbps
6VDC 772-000 100/1000 Mbps
6VDC • 772-002
100/1000 Mbps
6VDC • 772-005 100/1000 Mbps
6VDC • • 772-006
100/1000 Mbps
6VDC • • • 772-007 100/1000 Mbps
6VDC • • 772-008
100/1000 Mbps
6VDC • 772-100 100/1000 Mbps
6VDC • • 772-102
100/1000 Mbps
6VDC • • • 772-103 100/1000 Mbps
Internal AC 2x combo • • 772-213
100/1000 Mbps
Internal AC 2x combo • • • 772-214 100/1000 Mbps
Internal AC 2x combo • • • • 772-217
100/1000 Mbps
Internal AC 2x combo • • • 772-218 100/1000 Mbps
Internal AC 2x combo • • • 772-313
100/1000 Mbps
Internal AC 2x combo • • • • 772-314 100/1000 Mbps
Internal AC 2x combo • • • • • 772-317
100/1000 Mbps
Internal AC 2x combo • • • • 772-318 100/1000 Mbps
Internal AC 2x RJ-45 • • 772-413
100/1000 Mbps
Internal AC 2x RJ-45 • • • 772-414 100/1000 Mbps
Internal AC 2x RJ-45 • • • • 772-417
100/1000 Mbps
Internal AC 2x RJ-45 • • • 772-418 100/1000 Mbps
DC 2x combo • • 772-203
100/1000 Mbps
DC 2x combo • • • 772-204 100/1000 Mbps
DC 2x combo • • • • 772-207
100/1000 Mbps
DC 2x combo • • • 772-208 100/1000 Mbps
DC 2x combo • • 772-303
100/1000 Mbps
DC 2x combo • • • 772-304 100/1000 Mbps
DC 2x combo • • • 772-306
100/1000 Mbps
DC 2x combo • • • • 772-307
Description Part Number
Power Accessories Single AC Power Options AC/DC 6V Power Supply Wall Adapter (North America) for 772-00x and 772-10x only 720-600 AC Power Cord for ant with advanced features (with internal power supply) AC/DC Power Cord (North America) – C5 termination 721-020 AC/DC Power Cord (Europe) – C5 termination 721-021 AC/DC Power Cord (U.K.) – C5 termination 721-022 AC/DC Power Cord (Japan) – C5 termination 721-023 AC/DC Power Cord (Singapore) – C5 termination 721-025 AC/DC Power Cord (Australia / New Zealand) – C5 termination 721-026 AC/DC Power Cord (Switzerland) – C5 termination 721-027 AC/DC Power Cord (Italy) – C5 termination 721-028 AC/DC Power Cord (China) – C5 termination 721-030 Mounting Accessories 19” Rackmount Bracket, fits 3 ANT (advanced features) units 706-020 23” Rackmount Bracket, fits 3 ANT (advanced features) units 706-021
Power & Connectivity
AC Power Input 100-240 VAC, 0.4 A max, 50-60 Hz
DC Power Input 20-57 VDC, 0.75 A max
Physical Specifications
Dimensions (ant Module only) 1.42 H x 4.67 W x 5.25 D in. (36.1 H x 118.6 W x 133.4 D mm)
Weight (ant Module only) AC 625 g or 22 oz.
DC 590 g or 21 oz.
Environmental
Operating Temperature 0°C to +50°C (Commercial)
-40°C to +65°C (Industrial)
Maximum Altitude 2000 meters above sea level
Cold Start -25°C
Storage Temperature -40°C to +70°C
Operating/Storage Humidity 5-95% RH, non-condensing
Regulatory and Certification
FCC Part 15 Class B, ICES-003 Class B
Specifications ant Models Power & Connectivity
DC Power Input 6 Vdc, 0.85 A max, 2.5 W max (with mechanical bypass option, 3.5 W)
Physical Specifications
Dimensions 1.15 H x 2.3 W x 5.3 D in. (30 H x 58 W x 135 D mm)
Weight 120 g or 4.23 oz.
115 g or 4 oz. (Temperature hardened)
Environmental
Operating Temperature 0°C to +40°C
-40°C to +65°C (Temperature hardened)
Maximum Altitude 2000 meters above sea level
Storage Temperature -40°C to +70°C
Operating/Storage Humidity 20-80% RH, non-condensing
5-95% RH, non-condensing (Temperature hardened)
Regulatory and Certification
FCC Part 15 Class B, ICES-003 Class B FCC Part 15 Class A, ICES-003 Class A (Temperature hardened)
Accessories
Module Accessories ant Wall Mount Kit The ant wall mount kit comes with mounting hardware and cable strain reliefs, ensuring tangle-free cable management with secure, positive-contact snap-in module installation.
Specifications
Order code: AES-2-WALL. Kit ships in ant Module packaging when ordered together.
antModule - SFP Power Limits
Max Power per SFP SFP Type Installation
Location Ambient
Operating Temperature
antModule–Commercial Operating Temp.
1.1 W Commercial (70°C) Any Area 50°C
2.5 W Industrial (85°C) Any Area 50°C
antModule–Industrial Operating Temp.
1.1 W Industrial (85°C) Restricted Access 65°C
2.5 W Industrial (85°C) Any Area 50°C
The maximum power per SFP slot depends on the SFP type, the installation location and the ambient operating temperature of the ant unit. Total Power Budget for SFP Slots = 3.4 W
Summary Datasheet • ant • 3Q 2018
Front
Port 1
Back
© 2018 Accedian Networks Inc. All rights reserved. See Accedian/legal for trademarks. Specifications may change without notice. Some certifications may be pending, contact Accedian for details.
2x Combo Ports
2x RJ-45
Port 2 Port 1
Port 1 SFP or RJ-45
Port 2 SFP or RJ-45
Power 6 VDC for AC Adapter
Port 2 Status
