Substation Automation Systems

Moving together

This document may be subject to changes. Contact ARTECHE to confirm the characteristics and availability of the products described here.

Substation Automation Systems | Arteche 3

INDEX

1. The value of experience | 4

2. Substation Automation Systems | 6 › SAS Consulting & Training › SAS engineering and project management › P&C panels and cabinets

3. Scope of supply | 10 › Service and support › Basic phases of a SAS turnkey project

4 Substation Automation Systems | Arteche

THE VALUE OF EXPERIENCE

› Substation automation systems for HVAC and HVDC substations of Rómulo Project, the first subsea interconnection between the Spanish Peninsula and the Balearic Islands


The value of experienceArteche has a wide experience in protection, control and automation of power grids, with more than 1000 substation automation systems operating worldwide. The experience obtained in more than 35 years engineering substation control systems has provided us a complete and specialized application knowledge.

A highly qualified team with senior application engineers and project managers in USA, Spain, Mexico and Brazil, technological independence to integrate third-party equipment in multi-vendor systems (Siemens, GE, ABB, SEL, Alstom, Schneider, ZIV, Ingeteam, Vamp, Arteq, among others) and a extensive experience in project management. Arteche is a solid technology partner to address both new projects and upgrading existing systems.

From basic engineering to turnkey substation control systems commissioning. Arteche provides complete engineering services including protection and control panel building, IEDs integration, system testing, commissioning and training services for operators and power system engineers.

Mapamundi - PaísesMapamundi - Países

References at a glance


SUBSTATION AUTOMATION SYSTEMS

› Arteche has a comprehensive range of specialized engineering services focused on substation and power system automation.


SAS Consulting & TrainingArteche commissioned its first substation automation system in 1974. Since then, it has successfully commissioned over 1000 substation automation projects worldwide integrating devices from different manufacturers, providing deep specialized knowledge in domains such as the protection of electrical systems, automation, communication protocols and control strategies.

Today Arteche has proven experience and skilled application experts giving responses to the particular needs of each project. With its own specialized teams in USA, Mexico, Brazil and Spain, Arteche is a reference in substation automation systems that provides technological independence, a strong commitment to interoperability and a proven experience implementing multi-vendor substation automation systems.

KEMA CERTIFIED

Arteche develops and manufactures his own

KEMA certified IEC-61850 substation automation

platform, named saTECH.

Activities

› Basic engineering › Detailed engineering › Technical feasibility studies › Audit of control, protection and communication systems

› Training in substation control and automation › Software and hardware development

Substation Automation Systems | Arteche8

SAS engineering and project management

Arteche has a deep experience engineering, building and commissioning protection, control and substation automation systems as turnkey projects, whether for new substations or to upgrade existing substations.

Knowledge, flexibility, ability to manage comprehensive projects, from basic engineering to system commissioning, with a deep application knowledge. These are the keys that differentiate Arteche’s offer which allow to offer tailored answers to each project ensuring reliability, performance and scalability.

Engineering services for substation automation system commisioning and start up

Activities

› Turnkey project management › Build of protection and control panels › IEDs integration in multi-vendor systems › Local and remote SCADA/HMI › Remote terminal Units configuration and integration in telecontrol systems

› Telecommunication networks › Basic and detailed engineering › Project documentation › Factory and on-site testing › Commissioning › User training › Life-cycle management services

Projetcs:

› Protection, control and automation systems for new substations or to upgrade existing systems.

› Substation automation systems under IEC 61850.

› Substation integration in higher level telecontrol systems.

› Local and remote SCADA/HMI for substation systems.

› Configuration and setting of communications, data acquisition, protection and control intelligent devices.

› Historical events and alarms, trend graphs and demands.

› Events and alarms management, reports and notifications.

Most common protocols

› IEC-61850 › DNP (Serial and ethernet) › IEC 60870-5-104 › IEC 60870-5-101 › IEC 60870-5-103 › Modbus › Procome › Other propietary protocols upon request


P&C panels and cabinets

Arteche designs, manufactures, integrates and validates communications, metering, protection and control panels and custom-made cabinets for substation automation systems and distribution automation systems.

With its own laboratories and manufacturing centers in Spain, Mexico and Brazil, Arteche manufactures and delivers custom-made protection and control (P&C) panels to meet each project specifications and requirements. A close collaboration with our partners, a process workflow with key inspection points, factory integration and validation tests ensure a reliable system performance, avoid mistakes during commisioning and reduce the risk for operators.

Activities

› Supply of devices, components and associated accesories. › Design and manufacture of protection and control panels. › Design and manufacture of RTU cubicles and panelboards. › Functional and integration tests. › Commissioning and start up. › Project documentation management. › Integration of third-party devices. › Own test laboratories for system components validation and certification.


SCOPE OF SUPPLY

› Substation automation retrofitting for La Pampilla refinery main substation. Lima, Peru.


Service and support

Arteche provides efficient and professional support throughout the life cycle to ensure the correct operation and optimal perform of our systems. Comprehensive services to keep substation control systems in optimal conditions.

We have specialized teams in Spain, USA, UAE, India, Mexico and Brazil. Additionally, we have an extensive network of certified partners to give a quick response to the needs of our customers in other locations.

Activities

› Technical support and training. › Predictive and preventive inspections. › Corrective and emergency actions. › Supply of spare parts. › Upgradings and retrofits for existing systems.

› Analysis of information provided by customer.

› Development of preliminary project documentation list.

› Preliminary protection requirements.

› Preliminary equipment schemes and dimensional drawings.

› System architecture. Communications.

› Frequent meetings and contacts or even onsite auditing for retrofitting projects.

› Detailed list of documents.

› Protection and control single line diagram.

› Functional diagrams.

› Documentation for panel manufacturing.

› Communications architecture scheme.

› Wiring diagram and lists.

› Database.

› Control logic diagrams.

› FAT and SAT testing protocols / testbooks.

› Operation manual.

› Maintenance manual.

› Dossier with technical documentation of devices.

› Quality dossier.

› Selectivity coordination studies.

› Wiring diagrams between P&C panels and substation equipment (Measurement, protection, control and telecommunications).

Panel assembly

Protection and control systems: › Configuration of control and protection logics following approved diagrams.

› Configuration of communication protocols with SCADA system.

› Configuration of communication protocols on system IEDs.

› Configuration of parameters, settings and protection functions according to selectivity coordination study.

SCADA / HMI › Configuration of data acquisition:

› From IEDs.

› Communications with other equipment and systems, like UPSs, ancillary services.

› Communication protocols with remote operation management systems (DNP3 / IEC101 / IEC104 / IEC61850 and others).

› Database configuration.

› Human machine interface configuration.

› Checking the wiring, interconnections and operation mode defined in the detailed engineering.

› Tests both for AC and DC power supplies.

› Voltages and current testing at test points defined in engineering.

› Individual validation for each protection and control IEDs with injection test sets.

› Communications and time sync networks tests.

› Checking each and every one of the signals included in the system database. They are checked in the local databases, on the HMI and on SCADA.

› Checking communications with remote Operation Management Systems and control rooms (on FAT is used a simulator).

Tests on site, commissioning and start up › Execution of tests defined in

the SAT protocol, almost a repetition of FAT.

› Commissioning and start up.

Training › Training of engineers in charge

of the system operation and maintenance.

› Practical courses focused on the use of hardware, software, system features and functionalities present in the commissioned systems.

Basic phases of a SAS turnkey project

Device pro-gramming

Integra-tion and factory

validation

Onsite testing,

commis-sioning & training

Basic engineering

Detailed engineering

1

2

34

5

Substation Automation Systems - Arteche

Documents

Transcript of Substation Automation Systems - Arteche