Submittal Data: Wb-Pa1/Wb-Pa2 Wind baffle Submittal Data...
Transcript of Submittal Data: Wb-Pa1/Wb-Pa2 Wind baffle Submittal Data...
Job Name:Schedule Reference: Date:
Notes:
Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.
GENERAL FEATURES
• Allows P-Series outdoor units to operate to 0º F DB cooling.
• Allows PUMY outdoor units to operate to 23º F DB cooling.
• Prevents wind from reversing outdoor fan rotation.
• Durable, low maintenance construction.
Wind baffle Wb-Pa1 / Wb-Pa2 / Wb-Pa3
PLEASE NOTE
• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind.
• Outdoor units should not be installed in an orientation or site where the wind blows directly at the back of the unit.
• Wind baffle should not be used where there is any obstacle at either side or above the outdoor unit as the discharged air will be blocked.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and Quantity
WB-PA1 WB-PA2 WB-PA3PUY/Z-A12NHA4 1
PUY/Z-A18NHA4 1
PUY/Z-A24NHA4 1
PUY/Z-A30NHA4 1
PUY/Z-A36NHA4 1
PUY/Z-A42NHA4 2
PUY/Z-A42NHA5 2
PUZ-HA30NHA4 2
PUZ-HA36NHA4 2
PUMY-P36NHMU 2
PUMY-P48NHMU 2
PUMY-P60NKMU 2
SPECIFICATIONSWB-PA1
Exterior
Color Ivory
Surface Treatment Polyester Powder Paint
Material Alloy hot-dip zinc coated carbon steel sheet
Weight 7 lb 7.9 oz
WB-PA2
Exterior
Color Ivory
Surface Treatment Acrylic resin coating
Material Alloy hot-dip zinc coated carbon steel sheet
Weight 8 lb 4.4 oz
WB-PA3
Exterior
Color Ivory
Surface Treatment Acrylic resin coating
Material Alloy hot-dip zinc coated carbon steel sheet
Weight 8 lb 8 oz
WB-PA2 / WB-PA3 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Manufactured for Mitsubishi electric us, inc. designed for P-series and PuMY outdoor units onlYJob Name: Location: Date:
Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
GENERAL FEATURES
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.
• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.
• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.
• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.
• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.
Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle
Notes:
PLEASE NOTE
• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.
• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.
• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.
• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.
MODEL REQUIRED PER OUTDOOR UNIT
UNIT MODELType and QuantityWB-PA1 WB-PA2
PUY/Z-A12NHA4 1 0
PUY/Z-A18NHA4 1 0
PUY/Z-A24NHA4 0 1
PUY/Z-A30NHA4 0 1
PUY/Z-A36NHA4 0 1
PUY/Z-A42NHA4 0 2
PUZ-HA30NHA2 0 2
PUZ-HA36NHA2 0 2
SPECIFICATIONSWB-PA1
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 7lb7.9oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2
Exterior
Color(Munsell) Ivory(3.0Y7.8/1.1)
SurfaceTreatment Acrylicresincoating
Material Alloyhot-dipzinccoatedcarbonsteelsheet
Weight 8lb3.7oz
AccessoryxQty.<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>
WB-PA2 WB-PA1
Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.
diMensions: Wb-Pa1
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
DimenSiOnS: Wb-Pa1
Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.
diMensions: Wb-Pa2
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201
DimenSiOnS: Wb-Pa2
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#4)www.mitsubishipro.com
Manufactured for Mitsubishi ElEctric us, iNc.
Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.
FORM# WIND BAFFLE - 201211
diMensions: Wb-Pa3
.254 PLCS
23
21
8
8 .5
1
.5
25.6
22.4
25
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
ADESCRIPTION
REVISIONS
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03
INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5
MATERIAL
FINISH
20 GA GALV G90
POWDER COAT PAINT
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: SCALE: 1:8
UNLESS OTHERWISE SPECIFIED:
-
CF OCT-23-12
SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING
MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL
WB-PA3REV. DESCRIPTION
BDESCRIPTION
CDESCRIPTION
DDESCRIPTION
EDESCRIPTION
FDESCRIPTION
GDESCRIPTION
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.
1
1
.254 PLCS
23
21
8
8 .5
1
.5
25.6
22.4
25
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
ADESCRIPTION
REVISIONS
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03
INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5
MATERIAL
FINISH
20 GA GALV G90
POWDER COAT PAINT
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: SCALE: 1:8
UNLESS OTHERWISE SPECIFIED:
-
CF OCT-23-12
SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING
MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL
WB-PA3REV. DESCRIPTION
BDESCRIPTION
CDESCRIPTION
DDESCRIPTION
EDESCRIPTION
FDESCRIPTION
GDESCRIPTION
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.
1
1
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201
DimenSiOnS: Wb-Pa2
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201
DimenSiOnS: Wb-Pa2
.254 PLCS
23
21
8
8 .5
1
.5
25.6
22.4
25
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
ADESCRIPTION
REVISIONS
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03
INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5
MATERIAL
FINISH
20 GA GALV G90
POWDER COAT PAINT
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: SCALE: 1:8
UNLESS OTHERWISE SPECIFIED:
-
CF OCT-23-12
SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING
MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL
WB-PA3REV. DESCRIPTION
BDESCRIPTION
CDESCRIPTION
DDESCRIPTION
EDESCRIPTION
FDESCRIPTION
GDESCRIPTION
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.
1
1