Strudyna Basic V2.0 Catalogue
-
Upload
arcus-wire-group -
Category
Documents
-
view
322 -
download
32
description
Transcript of Strudyna Basic V2.0 Catalogue
STRUDYNA.commmm
R
BASICSERIES
V2.0
D-SHACKLE™
SWIVEL™
Language of Stainless Steel Environmental, Aesthetic, Confidence.
Aesthetic
Confidence
Basic
ADJUSTABLE FORK™
“Connecting structures”
Stainless steel is an essence in the language of contemporary design. Through its structural resistance and aesthetic beauty, stainless steel speaks with unsurpassed confidence to its surrounding.
At Strudyna, we speak the language of stainless steel. Combining casting and machining of different grades of stainless steel, we have provided a secure platform for many sectors of industry for over three decades. Striving in working ever more closely with our market, we spirit ourselves in challenging new production and design limits.
Environmental
Stainless Steel
Stainless steels are usually classified into five groups: Austenitic, Ferritic, Martensitic, Duplex (combination of Ferritic and Austenitic), and finally Precipitation-hardening.
Austenitic stainless steels contain 16-21% Chromium, 8-14% Nickel and other elements. This stainless group has a face-centered cubic structure and can be hardened by cold working, but not by heat treatment. In the annealed state, all are essentially non magnetic, but slight magnetism does form through cold forming. Austenitic stainless are excellent corrosion resistant, usually good formability and increases in strength as a result of cold forming. Type 316is the mostly widely accepted grade with a balance performance while type 304 is the cheaper cousin with lower corrosion resistance.
Ferritic stainless steels contain 10,5-30% Chromium, not over 0,1% of Carbon and other elements. This stainless group has a body-centered cubic crystal structure and is magnetic with good ductility and fair resistance to corrosion or oxidation. Ferritic stainless performs poorly in both high and low temperatures compared to Austenitic grades. Typical ferric grades include type 405, 408, 409.
Martensitic stainless steels contain 12-14% Chromium, 0,2-1% Molybdenum and higher carbon content between 0,1-1,2% Carbon. The high Carbon content gives these Martensitic stainless a higher tensile but also makes themmore brittle. This stainless group has a distorted body-centered cubic crystal structure and is usually quenched and magnetic. Typical Martensitic grades include type 410, 416, 420, 430 and 440.
Duplex stainless steels contain high Chromium levels between 19-28%, up to 5% Molybdenum but lower Nickel than Austenitic grades. This stainless group has a mixture of Austenitic face-centered and Ferritic body-centered cubic structures. Most duplex alloys are typically designed with equal parts of austenite and ferrite, but some commercial alloy may be 60% austenite to 40% ferrite. Duplex grade stainless typically posses higher strength over Austenitic grade, and has an improved characteristic in localized pitting/cracking or crevice corrosion.
Precipitated hardening stainless steel contains 17% Chromium and 4% Nickel. This grade of stainless steel uses elements such as aluminum, copper or titanium to precipitate harden their structure. These may result in either Austenitic or Martensitic annealed conditions. Austenitic conditions can be solution-treated to become Martensitic with sub zero temperature. Also commonly referred to as PH17-4 and type 630, this grade of stainless has a comparable corrosion resistance to Austenitic grades, but can posses even higher strength than Martensitic grade when solution treated.
� �68 % Chromium 60-63 % Molybdenum 99.8 % Nickel
Note : All casting sections of this catalog have been examined with spectra analysis for their chemical compositions and tested under internal lab settings of temperature 25 C ±3 C, humidity 45% ±10% . Non-casting sections are certified by their respective suppliers.
Note : This comparison chart matches the closest relative standards of major international standards. Each international standard may still differ slightly.
18.00-21.0018.00-20.0018.00-21.0016.00-18.00
8.00-11.00 8.00-11.00 9.00-12.0010.00-14.00
Description
İ0.08İ0.08İ0.08İ0.08
Standard material 304 of Casting (CF-8)Standard material 304 of Non-Casting (304)Standard material 316 of Casting (CF-8M)Standard material 316 of Non-Casting (316)
Comparison chart of major international standards
Material composition (AISI standards)
Stainless steel
C% Cr%-
-
2.00-3.00
2.00-3.00
Mo% Ni%Chemical Composition
60-63 % Molybdenum
en eexamined with spectra analysis foff r their chemical coomp0% . Non-casting sections are certified by their respecctive
İ0.08(3166)
rnational standardsnte
CF-8304
CF-8M316
USA AISISCS 13SUS 304SCS 14SUS 316
Japan JISGX5 CrNi 19-10X5 CrNi 18-10GX5 CrNiMo 19-11-2X5 CrNiMo 17-12-2
Germany DIN EN / DIN W.-Nr1.43081.43011.44081.4401
Great Britain B.S.304 C 15304 S 15316 C 16316 S 31
4
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Load testing
Load Characteristics depend greatly on each production method, minimum designed cross section area, material grade, and testing setup. In this section we will cover the fundamentals of load testing setup.
Safety working load is different in each geographical area. However, it is strongly recommended to designing your working load not over one quarter (1/4) of the breaking load listed in this catalog as a common and proper safety ratio.
Proof loading is a tensile loading procedure prior to the actual use of the product. Since stainless modulus of elasticity is relatively high to that of galvanized steel, (hence giving its unique elongation and warning sign) it is recommended to proof load at 1.8 times of recommended safety working load.
Load Class types indicate how each breaking load testing profile is setup and carried within this catalog. The class type are indicated with a (1) sign next to the B.L (1) sign on the Item menu bar (see page XVII). Principal testing profile setup stipulates the following conditions: 1) All items are checked prior to testing against distorted, worn or damaged parts including threads. 2) All items must be fully locked and tighten before testing. 3) Testing is done in room temperature settings. 4) Testing profile is setup in a vertical and undistorted alignment against applied loads. 5) 90% of loading area is covered by the loading tool. 6) Loads are applied in a consistent rate of 2MPa/sec. 7) No shock loading is applied.
class 16 class 17 class 18 class 19 class 20
class 11 class 12 class 13 class 14 class 15
class 1
Circular load end vs. horizontal flat load end.
class 2
Double circular load ends.
class 3
Double horizontal flat load ends.
class 4
Circular load end vs. rolled swaged cable load end.
class 5
Horizontal flat load end vs. rolled swaged cable load end.
class 6
Double rolled swaged cable load ends.
class 7
Double threaded internal threaded load ends
class 8
Circular load end vs. external threaded load end.
class 9
Horizontal flat load endvs. external threaded load end.
class 10
Hand swaged load end vs. external threaded load end.
Double Nylon strap load ends.
Circular load end vs. nylon strap load end.
Nylon strap load end vs. external threaded load end.
Circular load end vs. flat screwed load end.
Circular load end vs. internal threaded load end.
Double internal threaded load ends.
Circular load end vs. nylon rope load end.
Flat screwed load endvs. nylon rope load end.
Double Nylon rope load ends.
Nylon strap load end vs. internal threaded load end.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
5
>Casting utilizes the free shape forming of wax injection followed by five layers of ceramic shell made of silicon mallet sand. Each different grade of ceramic layer is thoroughly covered and dried before the next layer is carefully added. When all layers are formed securely, the wax insidethe ceramic is removed using steam, heat and pressure. The ceramic shells are then heated up to 900 degree Celsius before molten stainless steel is poured for product to take shape. Advantage of lost wax casting over their forged or press formed counterparts is that the items can be formed to any desired shape. However, due to the nature of the lost wax casting process, lost wax products provide less strength compared to their forged or machined counterparts.
>Forging utilizes the principal of heating stainless steel to a soft state of 1020 Celsius before compression force is applied for a forming process. Advantages of forging components are its strength. The molecules are highly compacted to form very high-strength components. The disadvantages of forging components are the limited forms and shapes as well as high molding costs.
>Press forming is the process by which SS sheets are compressed (cut) or formed (bent) by means of a press machine. This form of manufacturing can be very economical as form sheets can be bent into any desired shape. However, the disadvantages are the limited thickness as well as high molding cost. A variety of after-forming processes, including welding and assembly can be added to complete an end product.
>Welding in stainless steel is more critical than normal steel. In order to protect contaminatingthe exposed surface of heated stainless steel, a protective layer of pure Argon gas is applied. Further fillers may be added to extend the strength of the desired products. The two most common welding processes are TIG and MIG welding. MIG uses a higher temperature and thus results in a stronger and more expensive weld.
>Surface finish is one of the most critical areas of production; it will determine how end users perceive the value of the product as well as its corrosion resistance property. The following is a selection of major surface finishes used in this catalog : Mirror finish involves several layers of fine grinding and waxing to arrive at a mirror exterior. Due to the fine finish, it is the least susceptible to tea stain forming. However, due to the detailing required, it is also the most expensive surface finishing of all.
Machine finish is turned (cut) on a Lathe. This results in a very uniform, lined finish and thus hasa very mechanical look to it. Most architectural projects choose it for aesthetic effects.
Matte finish is the cheap cousin of machined finish. It uses a satin grade of 800 rollers to polish; it provides a non-reflective surface similar to Machine finish, but is much cheaper to do.
Electro polished finish uses electricity in a tank of chemicals. Similar to a wet battery setup, the outer layer of molecules of the stainless steel product is pealed away exposing the Chromium molecules resulting in a shining and corrosion-resistance finish.
>Passivation is the process of making a material "passive" in relation to other contaminants. In stainless steel, this is achieved by rinsing with diluted solution of nitric acid and peroxide alternating with deionized water. The nitric acid and peroxide oxidizes dissolve any impurities on the exposed surface of the stainless steel, and deionized water rinses away acid and oxidized impurities. This process adds an extra layer of protection to stainless steels surfaces.
Stainless steel fabricationSinox basic’s stainless steel production strength focuses on five principal processes of stainless steel: Casting, Forging, Press forming, Welding and Surface treatments.
6
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Mechanical and physical properties of AISI316 and AISI304
Force and tensile strength conversions
Imperial to Metric conversion of common units
Impactvalue (ISO-V)
Remark :
CF-8
304, 304H
CF-8M
316
AISI
CF-8
304, 304H
CF-8M
316
80-88
215
80-88
215
175
205
185
205
-
225
-
235
485
515
485
515
35
40
30
40
60
100/60
60
100/60
1)
1)
AISI [HRB] MPa MPa MPa
Elongationafter
fracture
TensileStrength,
min
min% J
HardnessHB 30
0,2%Yield Stress
1% Yield Stress
100 °C
16.8
16.0
15.8
16.0
200 °C
-
16.5
-
16.5
300 °C
17.9
17.0
17.0
17.0
400 °C
-
17.5
-
17.5
500 °C
18.6
18.0
17.7
18.0
600 °C
-
18.5
-
19.0
700 °C
-
18.5
-
19.5
Mechanical properties above ambient temperature
Mechanical properties ambient temperature (Longitudinal samples)
Mean thermal expansion coefficient between 20°C and ( 10 K )
Mean thermal expansion coefficient between 20°C and ( 10 K )-6 -1
Physical properties
CF-8
304, 304H
CF-8M
316
7.88
7.90
7.90
8.00
0.53
0.50
0.53
0.50
15
15
15
15
-
0.73
-
0.75
-
200
-
200
MagnetizableMagnetizable
Modulus of
elasticity
( 20 °C )
Modulus of
elasticity
( 20 °C )
Electric
resistance
( 20 °C )
Electric
resistance
( 20 °C )
Heat
conduction
( 20 °C )
Heat
conduction
( 20 °C )
Specific
heat
( 20 °C )
Specific
heat
( 20 °C )
Density
( 20 °C )
Density
( 20 °C )
Yes
No
Yes
No
1)
1)
kN/mm2
2Mm
m
W
K.m
kg
g.Kkg
dm
1 Lb
1 foot
1 ft2
1 psi
1 Kip
1 inch
1 in.2
1 ksi
1 kg
1MPa
9.81N
1 N/mm2
4.45N
0.305m
0.0929m2
6890 Pa
4.45kN
25.4m
645mm2
6.89MPa
0.1019kg
1N/m2
=
= =
=
=
===
=
=
=
=
1= Shielded arc welding; MIG-welding; WIG-welding (Argon-arc).
1)Austenitic steel can be slightly magnetism when quenched. Their magnetism may increase with increased cold forming.
AISI
1 N
1 Pa
Note : Refer to page IV for more detail of Load testing.
Note : Maximum safety working temperature of all stainless steel product is 300 °C.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
7
Stainless steel is essentially a low carbon steel which contains Chromium at 1% or more by weight. It is this addition of Chromium that gives the steel its unique stainless, corrosion-resisting property, the most important stainless steel feature. The corrosion resistance and other useful properties of the steel such as formability and strength, to name just two, are enhanced by increased Chromium content and the addition of other elements, like Molybdenum, Nickel and/or Nitrogen.
However, the aesthetic and hygienic surface appearance of stainless steel products can not be regarded as completely maintenance-free. In addition, to achieve maximum corrosion resistance, the surface of the stainless steel must be kept clean. Keeping its good looks and its long life depends on how regularly and how well it is cleaned. Surface contamination and the formation of deposits are critical factors in reducing its shiny life. These contaminants may be minute particles of iron or rust from other non-stainless steels used in nearby construction or welding sparks that were never removed.
Industrial, commercial and even indoor naturally occurring atmospheric conditions can all result in corrosive deposits over extended periods of time. These deposits include cleaning chemicals such as chlorine, fuel as oil vapor, dust, or even salt from the sea. Other more aggressive conditions including high humidity indoor swimming pools or salt maintained snow roads can increase the speed of corrosion and therefore require more frequent maintenance. Routine, simple and gentle cleaning will reward the owner with a product which retains its properties and appearance for years to come. The frequency and cost of cleaning materials for stainless steel are lower than for many other materials so this will often out-weigh higher acquisition costs.
Maintenance Program The common rule for keeping stainless steel in its original, pristine condition is : "clean it when it is dirty". For regular cleaning, just use ordinary soap, or a mild, diluted detergent, or diluted ammonia in warm water ; apply with a soft cloth or synthetic sponge. Rinse well, dry with a soft cloth or drip dry. Occasionally the use of a mild household cleaner, a fine synthetic scourer or a brush with nylon bristles may be used. Regular cleaning will often remove heavy soiling and accumulated staining.
Suggestions: • Routine, simple and gentle cleaning • Use only the above mentioned cleaning products • Employ repeated routine cleaning rather than an aggressive single one completely
Suggest not to do: • Use coarse abrasive powders • Use metallic scourers • Use "Silver Cleaners" • Subject stainless steel to "abnormal" use
Caution and warningAll products require regular inspection from trained professionals of each respective country in use.This process may not be skipped as products are effected by wear, tear, overloading or improper installation.
Proper installation check list. Check proper selection of material, product and size to match your use and environment Check all your base structure and fittings are not damaged prior to installation Check all pins and screws are in full in position after installation Check installation 2 weeks after initial installation and regularly afterwards for any loosening or damage
Maintenance of stainless steel
8
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Recipient :
Dead Load (Tension)
1 1,500
2 2,000
3 2,500
NOTE:
Ni%8.00 -11.008.00 -10.509.00 -12.0010.00-14.00
NOTE:
���
45/1 Moo2 Nongpho Photharam Ratchaburi 70120 Thailand Tel: +66 (32) 351046 Fax: +66 (32) 389250, 340447 Email: [email protected] Service Dept. (English) Tel: +66 (9) 8366581, 8365943 Fax: +66 (32) 389250, 351048 www.kinzi.com
������������������ �Signature
���������������� �Quality Manager
Recipients of this certificate is obliged to notify any change of contacting details for as long as this certificate remains valid. This certificate will cease validity should the recipient fails to update new contacting details within two
weeks of change. To update new contact details pleases contact us at [email protected] All information contained in this document and any attachment thereof are intended for the named recipient only and may contain confidential
and/or privileged material. All contents of this document, including any attachment thereof are subject to copyright and may not be distributed or duplicated partially or in whole without prior written consent.
CF-8M SCS 14 316 C 16 GX5 CrNiMo 19-11-2 1.4408316 SUS 316 316 S 13 X5 CrNiMo 17-12-2 1.4401
CF-8 SCS 13 304 C 15 GX5 CrNi19-10 1.4308
304 SUS 304 304 S 31 X5CrNi 18-10 1.4301
Casting sections have been examined with spectra-analysis for their chemical composition andtested under internal lab settings of temperature 25 3 , humidity 45% ±10% by a competent person.Non-casting sections are certified by their respective suppliers.
COMPARISON CHART OF MAJOR INTERNATIONAL STANDARDSUSA AISI Japan JIS Great Britain B.S. Germany DIN Germany W.-Nr
Standard material 316 of Casting (CF-8M) İ0.08 18.00-21.00 2.00-3.00Standard material 316 of Non-Casting (316) İ0.08 16.00-18.00 2.00-3.00
Standard material 304 of Casting (CF-8) İ0.08 18.00-21.00 -Standard material 304 of Non-Casting (304) İ0.08 18.00-20.00 -
Procedure and setup of this Spyder Testing are performed under KZ SDI-QCSP standards.Proper safety coefficient must be applied by the intended users.
MATERIAL COMPOSITION
Part of ProductsChemical Composition
C% Cr% Mo%
SPD01/4L/A-200MM*200MM*48MM SPD01/4L/A SPYDER 4 LEGS 3,000
SPD01/4L/A-250MM*250MM*50MM SPD01/4L/A SPYDER 4 LEGS 4,000
No. Item DescriptionDeformation Load (N.)
Negative Windload (Compression)
SPD01/4L/A-160MM*160MM*40MM SPD01/4L/A SPYDER 4 LEGS 2,000
DEFORMATION LOAD AND MATERIAL CERTIFICATE
����������This certificate certifies the deformation load of stainless steel products ����������as per stated in the table below and material of casting and non-casting ����������sections conform to the following chemical composition table.
DEFORMATION LOAD
Date of validity: Till Dec 31, 2009 or further notice
6WDLQOHVV�VXSSO\�,QF
Email : MRQK#VV,�FRP�
Tel : ����������������
Certificate no : SAMPLE����������� �Certificate type : Class A
Issued date: -DQ��QG�����
Kinzi (Thailand) Co.,Ltd.
Certification Scope : Item :
Inch thread (mm)
Inch thread (mm)
Inch thread (mm)
Inch thread (mm)Inch thread (mm)
Inch thread (mm)
General Castingproduct tolerance (mm)
General Machiningproduct tolerance (mm)
1000-4000400-1000120-40030-1206-300.5-6ISO 2768Standard
Imperial thread to Metric (mm) conversion by group
Imperial thread to Metric (mm) conversion by size
5.5567.1448.731
10.31938.10031.75028.57534.925
4.7637.938
11.11314.28817.46320.81323.813
3.969
25.40012.700
6.35019.050
3.1759.525
15.87522.225
3.1753.9694.7635.5566.3507.1447.9388.731
9.52510.31911.11312.70014.28815.87517.46319.050
7/32"9/32"11/32"
13/32"
11/2"
11/4"
11/8"
13/8"
3/16"5/16"7/16"9/16"
11/16"13/16"15/16" 5/32"
1"1/2"1/4"3/4"1/8"3/8"5/8"7/8"
1/8"5/32"3/16"7/32"1/4"
9/32"5/16"
11/32"
13/16"7/8"
15/16"1"
11/8"
11/4"
13/8"
11/2"
20.81322.22523.81325.40028.57531.75034.92538.100
3/8"13/32"7/16"1/2"
9/16"5/8"
11/16"3/4"
a) Invoice no.b) Invoice datec) Product order no.
Class B) actual product breaking load report ‘’ C) actual chemical composition report ‘’ D) actual product batch traceability ‘’ E) actual product x - ray report ‘’ F) actual metallic crystallization ‘’ G) third party certification
Class A certificate certifies design load as well as material grade and is provided free of charge. Send your request with the following information:
Certificate for the following criteria can be supplied with a fee.
g
m
g
m
±0.5
±0.2
±0.3
±0.1
±0.8
±0.3
±1.2
±0.5
±2.0
±0.8
±3.0
±1.2
Class A and other Certificates
Production tolerance guidelines for this catalog
Note : Production follows the above guidelines. However, product goes through constant upgrade, Check with manufacture for the latest product specs and tolerances.
STRUCTURALDYNAMICS
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
9
S360B, SF360BS360CP, SF360CP S360LK, SF360LK S360C, SF360C
S360CI S3611 S3611BB S2711 S2711BB
S361 S361R SF361R S361RF SF361RF
S370 S370CP, SF370CP S371LK S370B, SF370B S370C, SF370C
S362
S365DLK S364LK
S0181
S0182 S0182-0840N
S365LK
SF3606
S018 S0181SFP3606
S0182
SFP3606
S3607
S362LKS362CP S362B S362C
S380CPS380 S380LK
S360BWN S360WO
4-93-32, 4-16 4-12, 5-12 4-25, 8-16 4-25, 8-166-12 3/16"-1" 3/16"-1"3/16"-1"3/16"-1"4-8 5-8 4-8 5-8 4-84-8 3-32, 4-16 5-12 4-25, 8-16 4-25, 8-164-12 4-8 4-12 4-12 4-129-12 5-12 5-8 5-8 6-124-84-12 6-8 32*1004.5*56, 7*8732*100 (Blue)32*100 (White)4-25 6-19 6-196-196-1988, 5/16"UNF8, 5/16"UNF
S360 S360CP, SF360CP S360LK, SF360LKFS360B, SF360BS360C, SF360CS360CIS3611S3611BBS2711S2711BBS361S361RSF361RS361RFSF361RFS370S370CP, SF370CPS371LKS370B, SF370BS370C, SF370CS362S362CPS362LKS362BS362CS360BWNS360WOS365LKS365DLKS364LKS380S380CPS380LKSF3606S3607SFP3606SFP3606S018S0181S0181IS0182S0182IS0182-0840NS3062/E1S3062/E2
S3062/E1 S3062/E2
Picture index
S360
S0182
20
21
22
23
24
25
26
27
27
28
29
30
31
32
33
Size(mm/inch)
PageItem no.Shackles & SwivelsGroup A
10
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
S260 S261 SF511 SF512 S7350, SF7350
S323H S330 S325 S325X
S331X
S161,162,163 S231, 232, 245
S4322 S2511 S225 S225SQ
S7360 SF234U SF414 S2343 S2344
S10 S661
S2311S2432 S461
S2470 S2471 SF2431 SF2431X SF24302
SF24302B SF24301 SF24301B SF2430 SF2430B
SWR 7x19
S260 S261 SF511SF512S7350, SF7350S7360SF234USF414S2343S2344S10S661SWR 1x19SWR 7x7SWR 7x19
1.5-25.0 2-32 2-8 2-8 3.5-12, 4-8 6,10 2-25 3-16"-1"6-252-255-25 3/16"- 3/4" 2.5-12.0 2.0-12.0, 1/8"- 5/16" 2.0-12.0, 1/8"- 5/16"
S331
Size(mm/inch)
PageItem no.
S323H S330 S325S325XS331S331XS4322S2511S225S225SQS161, 162, 163S231, 232, 245S2432S2311S461S2470S2471SF2431SF2431XSF24302SF24302BSF24301SF24301BSF2430SF2430BS247A S247H SF878S2450, SF2450S2450X, SF2450XS2490S2490XS369S369XS249
Hooks & Snaps1/4"-5/8" 1/4"-1/2" 1/4"-1/2" 1/4"-1/2" 1/4"-1/2"1/4"-1/2" 1/4"-1/2" 1", 1.1/4" 3/8"-1.1/4" 1"*3.1/8"3.1/2, 4", 4.3/4"3.1/2, 4.1/4, 5"1919, 289032-10050-90 6-126-126-126-126-12 6-126-126-12666, 85-104-13, 5-109911110-3
S2490 S2490X S369 S369X S249
S247A S247H SF878 S2450, SF2450 S2450X, SF2450X
40
41
42
43
44
45
46
47
48
34
35
36
37
38
39
SWR 1x19 SWR 7x7
Group C
Size(mm/inch)
PageItem no.Wire ropes & ThimblesGroup B
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
11
S251S830S840S5014S5013S3142, S333S3143, S334SF268SF875SF880SFUSFJSFH
S251 S830 S840 S5014 S5013
S3142, S333 S3143, S334 SF268 SF875 SF880
SFU SFJ SFH
Hooks & Snaps Size(mm/inch) PageItem no.
0-3 3/8"-3/4" 1/2"1"1/2"-5/8"7/8"x4",1"x5"1.1/8"*4",1.1/8"x5"Ø2-Ø10Ø4-Ø12Ø6Ø6Ø6Ø6, Ø9, Ø13
48
49
50
51
Group C
Terminals & TurnbucklesS311EE S311HE S311HHS311NEES311NHES311NHHS311JES311JJS312SF312PEESF312PHESF312PHHSF312PJESF312PSF312/7SF3127PS3125/7S312/5S3125SF3121/7S3121P, SF3121PS3121/5S312P/4S3125P/4S3400SF312P/MINSF3121P/MINSF3122P/MINSF3122PSF3122PKS311KSF7801L,SF7801
SF7805/CHS3121/5CH
S311EE S311HE S311HH S311NEE S311NHE
S311NHH S311JE S311JJ S312 SF312PEE
SF312PHE SF312PHH SF312PJE SF312P SF312/7
SF3127P S3125/7 S312/5 S3125 SF3121/7
S3121P, SF3121P S3121/5 S312P/4 S3125P/4
SF312P/MIN SF3121P/MIN SF3122P/MIN SF3122P
S3400
5-20, 3/16"-3/4"4-20, 3/16"-3/4"5-20, 3/16"-3/4"4-20, 3/16"-3/4"4-20, 3/16"-3/4"4-20, 3/16"-3/4"5-20, 3/8"5-203/16" - 3/4"5-205-205-205-205-205-205-205-245-20, 3/16"-5/8"5-205-20 10-1/2", 5-20, 2*M5-5/16"*M122.5-12, 3/32"- 5/16"4-104-105-204-105-105-105-20, 1/8"-1/2"6-205-20cable 2.5-3/8”,2*M5-5/16”
14-3614*M24-36*M56
Size(mm/inch) PageItem no.
52
53
54
55
56
57
58
59
60
61
6264
Group D
SF3122PK
S311K SF7801L, SF7801 SF7805/CH S3121/5CH
12
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
SF312PBDSF312PBD/MINSF312PLBD/MINSF7802SF78021/L, RSF78021N/L, N/RBF311EL, ERBF311NEL, NER
BF311HL, HR
BF311NH/L, NH/R
SF7803BF312P/JL, /JRS7805, SF7805B3125L, RS811, S812S811M, S812MS813S814, S814LS814N, S814N/LLTS, RTS
SF312PLBD/MIN SF7802 SF78021/L,SF78021/R
SF312PBD SF312PBD/MIN
Size(mm/inch) PageItem no.
M5-M24, 1/4"-3/4"UNC4-104-102-12, 3/32"-1/2"M5-M20M5-M20M4-M20, 3/16"-1/2"UNCM4-M20, 3/16"-1/2"UNCM4-M20, 3/16"-1/2"UNCM4-M20, 3/16"-1/2"UNC2-16, 3/32"-3/8"UNCM5-M242-10, 3/32"-3/8", 3-16M5-M203-103-103-103-103-105-20
Terminals & TurnbucklesGroup D65
66
6768697071
72
73
74
75
SF4900SF317 SF3171 SF3250 SF32501
SF3252 SF3251 SF319 S329
SF317 SF3171 SF3250SF4900SF32501 SF3251SF319S329SF318
SF3252
SF3214 SF3214H SF3204SF3212SF3212HSF3202SF3211S3213SF3201SF3216
SF318
SF126 SF126
SF308SF3215SF3205
S319LT, S3192SF3192 S319LT, S3192
SF3192
SF308 SF3215 SF3205
SF3214 SF3214H SF3204 SF3212 SF3212H
SF3202 SF3211 S3213 SF3201 SF3216
3*10 - 13*160 6*30 - 12*80 3*15 - 10*100 5*20 - 8*65 5*45 - 8*50
5-85-85-85-105-105-9 5-8 1.1/2" - 2.3/8"5-8 5-8
3*35 - 8*50 5*45 - 8*603 - 12*2006*40 - 12*1603-8
3-7, 6-12, 4-1010*85 - 10*100
Rings & Eye plates Size(mm/inch) Page Item no.
7677
85
86
84
83
82
7879
80
81
6*405*85*8
Group E
SF78021N/L,SF78021N/R
BF311EL,BF311ER
S813 S814, S814L S814N, S814N/L LTS, RTS
SF7803 BF312P/JL, BF312P/JR
BF311N/HL,BF311N/HR
BF311NEL,BF311NER
BF311HL,BF311HR
S7805, SF7805 B3125L, B3125R S811, S812
S811M, S812M
SF78021N//////RRRRRRR 311NER BF311HR
S814N/
/JRF7
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
13
SF3206SF321SF320SF3221
SF3206 SF321 SF320 SF3221 5-8 5-8 5-8 15*42-30*50
86
87
S582 S3061 S80704S580S306 StandardS306 SpecialS307SF3191SF3182S3291
DIN 315DIN 316S80701S31501S4600SF413
S582 S3061 S80704 S580 S306 Standard
S306 Special S307 SF3191 SF3182 S3291
DIN444SFDIN 444
SFDIN 444FT
DIN 444, SFDIN 444SFDIN 444FT DIN 315 DIN 316 S80701
S31501 S4600 SF413 SF541, SF543, SF544, SF547, SF548, SF549
SF541, SF543, SF544, SF547, SF548, SF549
M16-M24
M8-M248-244-1210
6-36 , 1/4-1"
6-30 , 1/4-1"
8-126-30, 1/4-1"
6-24, 1/4-1"
6-24, 1/4-1"6-24, 1/4"-1/2"5-16, 1/4"-1/2"4-125-1210, 3/8", 5-24, 5/16"-3/4"
5-12
4-24, 3/16"-1"
5-24, 1/2-3/4
U-bolts & Eye bolts Size(mm/inch) Page Item no.
SAB/APL
SAB/T/APL
SAH/APL SAB/APL
SAB/T/APL
SAH/APL
SF7806TR
SF7801/IR, /IL
Snap shackles & Pelican hooksS2476 S2478 S2482S24821S2483S2464, 2466, 2468S2831
SF7806TR SF7801/IRSF7801/IL
S2476 S2478 S2482 S24821 S2483
S2464, 2466, 2468 S2831 S2831-I3, I4, I6, S2831I3, S2831I4
S2831-I3, I4, I6, S2831I3, S2831I4
S890HP SF8282
SF510 S510
S890HPSF8282SF510S510
1, 2, 3 1, 2, 31, 2, 31, 2, 30, 1, 2, 352, 66, 963"- 6"
Balustrades
4", 6"3-107*18, 9.5*26, 15*34.517*36, 19*36
M5-M8M5-M85.0-8.2M5-M8Cable 3-6
104
105
106
107
107
102
103
88
89
90
919293949597989899
100101
Size(mm) Page Item no.
Size(mm) Page Item no.
Cable 3-6, 3-6, 4-8, 6-121/8"-5/32", 3/16"
Group F
Group G
Group H
14
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Blocks & PulleysSF8190 SF8240 SF8241SF8248SF8248PSF8258SF8258PSF8250SF8250PSF8252SF8252PSF8253SF8253PSF8256SF8256PSF8257SF8257PSF8671ESF8671HSF8672ESF8672HS314S314AS314NLS314ANLS315 S315A S315NLS315ANLS3141S3151S3141NLS3151NLS3141/AS3151/AS3141NL/AS3151NL/AS3141/BS3151/BS3141NL/BS3151NL/BS314/H1S212-E1-50S212-H1-50S212-E1-75S212-H1-75S212-E1-100S212-H1-100S212L-E1S212L-H1S313-E1S313NL-E1S210-E1S210-E2S210-E3
SF8190 SF8240 SF8241 SF8248 SF8248P
SF8258 SF8258P SF8250 SF8250P SF8252
SF8252P SF8253 SF8253P SF8256 SF8256P
SF8257 SF8257P SF8671E SF8671H SF8672E
SF8672H S314 S314NLS314A S314ANL
19191925252525252525252525252525256565656525, 32, 5025-5025-5025-5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5025, 32, 5050505075751001007510050, 75, 1005075, 100, 12575, 100, 125100
Size (mm)
Page Item no.
S315 S315NLS315A S315ANL S3141
S3151NL/B
S3141NL/BS3151/BS3141/BS3151NL/AS3141NL/A
S3141NLS3151 S3151NL S3151/AS3141/A
S314/H1 S212-E1-50 S212-H1-50 S212-E1-75
S212-H1-100S212-E1-100S212-H1-75 S212L-E1 S212L-H1
S210-E3S210-E2S210-E1S313-E1 S313NL-E1
108
109
110
111
112
113
114
115
116
Group J
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
15
S211-H2
S211-H1S211-E2S211-E1S210-H2S210-H1 S210-H1S210-H2S211-E1S211-E2S211-H1S211-H2S213-E1
S213-E1
SFG216016
SFG216018 SFG216017 SFG216019
75, 100, 12575, 100, 12575, 100, 12575, 100, 12575, 100, 12575, 100, 12575, 100, 125, 150
Blocks & Pulleys
Size(mm/inch)
Page Item no.
S4100 S4100S3230S301S506L, RS4015S505S505HS507S508SFG216016SFG216018SFG216017SFG216019
S3230 S301 S506L, S506R S4015
S505 S505H S507 S508
1.5-10.0 200, 240 4.5", 6", 8"4.1/2", 6"2.1/2", 4.1/2", 6" 4"-12"6"-7"4"-10"4"-15"Ø51Ø51Ø51Ø51
Anchors, Cleats & Rod holders
Size(mm)
Page Item no.
S9222R-3" S9222R-3.5"S9222R-4"S9224S9224WSS9224WLS9223S9223WSSF8340SF8341S9225/HPS9226/HPS9227/HPS9228/HPS322CSF322SF323SF324S9210S9211S5373S5341S5359S391S392
S9222R-3" S9222R-3.5" S9222R-4" S9224 S9224WS
S9224WL S9223 S9223WS SF8340 SF8341
S9225/HP S9226/HP S9227/HP S9228/HP S322C
SF322 SF323 SF324 S9210 S9211
S5373 S5341 S5359 S391 S392
3" 3.5" 4" 38 383857 , 7157 , 713*31*12, 3*46*13, 3*61*153*41*25, 3*56*35, 4*80*504 5 4 45 4-1010-1610-163"- 4"3"19 9 5,101"1"
Hinges & Deck mounts
118
119
120
121121
122
123
124
125
126
116
117
117
Size(mm/inch) Page Item no.
Group K
Group J
Group L
16
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Hinges & Deck mountsS393 S393
S394S395S31601S31602S31614S31614AS31606S31606AS316061S316061AS31612S31612ASF8345SF3272
S394 S395 S31601 S31602
SF3272SF8345S31612AS31612S316061A
S316061S31606AS31606S31614AS31614
1"1"1"1"- 1.3/16"1"- 1.3/16"7/8"7/8"7/8"7/8"7/8"7/8"7/8"7/8"12*40*47*, 16*55*62.550
Parts & ReplacementsSFHA/01 SFHA/03 SFHA/07 SFHA/08 SFHA/11
SFHA/12
SFHA/01SFHA/03SFHA/07SFHA/08SFHA/11SFHA/12SF3900
SF3900
5*1284.75*1254*1105*15012.7*287.5*243/16"*1/2"- 5/16"*1 1/2"
Logo Symbol description
>>
>>
>>
>>
>>
>>
PBC
Plastic Back Card. Piece per carton.
UpsetForgingF
Allen key Allen key
CollaredPin
Collared PinLockingPin
Locking Pin Removable Pin Pin
Eye Hook
Pipe
Swivel
Plastic NylonDouble Casting Sheave
Triple Casting Sheave
Quickassembly
Quickassembly Quick release
WrenchWrench
Screwdriver Hammer PliersScrewdriver
Light type
Casting Sheave
Light type
Product categories
Material
Usability
Measurement units
Tools
Packing
Removable Pin
Swivel
Metric Imperial
HammerPliers
Quick release
Plastic NylonCasting Sheave
Double Casting Sheave
Double Nylon
Sheave
Pin Pipe
Plastic Nylon
Triple
Casting
Sheave
Size(mm/inch) Page Item no.
Size(mm/inch) Page Item no.
L5L6
L7
L8
130
131131
HookEye
Group L
Group M
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
17
ALA
B B
L
SS304
SIZE(mm)
Field of applicationD-shackles (square head pin) are designed for application where strong wrench tightening pins are required for a prolong use in a fix location.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ : AISI316 - DIN 1.4401Production : S360B Shackle - Cast Pin - See chart SF360B - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
S360B,SF360BD-shackle(square head pin)
S360C, SF360CD-shackle (oval sink pin)
S360CID-shackle (hexagonal sink pin)
4360-10044360-10054360-10064360-10074360-10084360-10094360-10104360-10124360-10134360-10164360-10194360-10224360-1025
6360-10046360-10056360-10066360-10076360-10086360-10096360-10106360-10126360-10136360-10166360-10196360-10226360-1025
ØA(mm)
456789
10121316192225
B(mm)
8101214161820242632384450
L(mm)
162024283236404852647688
100
456789
10121316192225
S360BWrench
S360B, SF360B550
1,0001,7002,0002,8003,5004,5006,0006,500
10,00015,00019,00023,000
B.L.(1)
(kgs)Pin
CastCast
ForgedForgedForgedForgedForgedForgedForgedForgedForged
CastCast
SS316
item no.
Material
2360-10082360-10102360-10122360-1016
8101216
SIZE(mm)
16202432
B(mm)
32404864
L(mm)
8101216
ØA(mm)
SF360B
FF
FF
SS316
500200150
50
item no.
Material B.L.(1)
(kgs)
3,5005,5007,500
14,000
Field of applicationD-shackles (square head pin) are designed forapplication where strong wrench tightening pinsare required for a prolong use in a fix location.
SF360B - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
4360-1004360-1014360-1014360-1014360-1014360-1014360-1024360-102
2222
S
FF
FF
item no.
Material
D-shackle (hexagonal sink pin)
4,0002,0001,000
700500400200150125
50402015
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Reading information in this catalog
F
This catalog has been designed with an effort to display technical information in a clear and easy to use matter. For further clarification, follow the following description:
Menu Bar Organizes the technical information relevant to one single item. In this case S360 D-shackle.SF360 has the same appearance but are upset forged and thus considered a separate item. SF360 menu bar is thus created following the S360 list.
Item no. Shows the relevant items depicted in the item display. One item display may contain several Item codes if these items share same appearance but different manufacturing methods. Ex. S360 and SF360
Item display shows all relevant items presented in the same catalog page. Items are displayed side by side for easy identification of their differences. Product dimensions are labeled with blue arrows with their respective lettering. Check Menu bar for their respective dimensions. Dimension label “A” only appears on S360 but will represent all pin sizes for the all products in the same display. (ex. S360CP and S360LK)
Threading Logo appears in front of Item no. to easily identify the type of thread each item uses. is for metric thread and is for inch thread.
PPC Logo or Pieces per carton logo identifies the quantity in pieces packed in a standard carton.
B.L. stands for breaking load in kgs. The BL(1) shows the class of load type this items is setup and tested under. Please see page IV for further information. Please note recommended safe working load is ! of B.L.
Item no. are repeated in three areas of the page, 1) under each item’s display, 2) under each item’s menu bar and 3) above each technical data section.
Item size are always identified with an highlighted blue for easy identification.
Upset forged logo or is shown in front of order code should the item is produced with upset forging methods.
item no. of SF360 displays and identify this menu bar’s main product.
SS316 order no. is the order number to use when ordering stainless material grade 316. SS316 order numbers are always in bold characters.
SS304 order no. is the order number to use when ordering stainlessmaterial grade 304. Not all items (ex SF360) will come in both 304and 316 material. SS304 order numbers are never in Bold characters.
Production identifies both: major production part (ex. shackle base) and minor production part (ex. pin). Should the production be different between different sizes of the same item “see chart” will appear here. Please refer to the right hand chart under its respective menu bars.
Surface treatment identifies the surface finish of the item. Most common finishes are E.P. for electro polish, M.P. for Mirror polish, M.F. for matte /satin or hair line finish, S.B. for Sand blasting finish and M.A. for machined finish. Surface finish will be shown on the Menu bar should the item contain different finishes on different sizes within the same item.
Field of application gives a brief description of how items are used. For more information on each item’s application, go to www.strudyna.com.
Casting / Forging materials are always identified in technical data section. Materials are based in AISI grades with corresponding DIN grade shown. Some items may be available on both SS304 and SS316 material. Refer to menu bar for their respective order numbers.
Production Process is shown in the menu bar when they differ on different sizes within the same item no. In this case the same Pins are forged or casted. Any other manufacturing process that is identical throughout the item no. will be shown in the technical data section.
18
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
19
Basic Assembly
SF3121P : Page 82.Pipe turnbuckle, jaw and swage stud
S311JJ : Page 54.Frame turnbuckle, jaw and jaw (metric thread)
S311JJ : Page 54.Frame turnbuckle, jaw and jaw (metric thread)
SF3122P/MIN : Page 60.Mini pipe turnbuckle, swage terminal and swage terminal
S311NHE : Page 53.Frame turnbuckle with nut, hook and eye
S360 : Page 20.D-shackle
S811 : Page 73.Eye swageless terminal
S312P/4 : Page 59.Pipe turnbuckle, jaw and swageless terminal
SF7801 : Page 62.Right threaded stud terminal
SF7803 : Page 71.Swage fork
SF7803 : Page 71.Swage fork
SF322 : Page 125.Wire eye strap
S812 : Page 73.Fork swageless terminal
S812 : Page 73.Fork swageless terminal
S260 : Page 34.Wire rope clip
SF7802 : Page 66.Eye terminal
SF234U : Page 36.Light thimbles
item no.
Material
item no.
Material
AB
B
LA
S360D-shackle
S360CP, SF360CPD-shackle (collared pin)
S360LK, SF360LKF (forged)D-shackle (locking pin)
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S360LK - Shackle - Cast Pin - Forged SF360LKF - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationD-shackles (locking pin) are designed for application where accidental dropping of pin must be avoided during operation. ex. high sea enviroment or high tower/pole locations.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics.
LockingPin
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S360 - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationD-Shackles are designed for application where quick manual setup/release assembly pins are required.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S360CP Shackle - Cast Pin - See chart SF360CP Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)
Field of applicationD-Shackles (collared pin) are designed for application where a more secure tight pin is required.
S360LK, SF360LKF
S360
S360CP, SF360CPCollared
D-Shackles are designed for application where quickmanual setup/release assembly pins are required.
T h i l D
S360CP, SF360CPCollared
D-shackle
item no.
Material
6360-50046360-50056360-50066360-50086360-50106360-5012
S360LK
81012162024
B(mm)
162024324048
L(mm)
4.404.405.257.108.90
10.70
Ø A(mm)SS316
8001,0001,4002,8004,0006,200
B.L.(1) (kgs)
SIZE(mm)
4568
1012
3,0001,5001,000
500250125
1122
n/an/a
PBC
item no.
Material S360
81012141618
B(mm)
162024283236
L(mm)
456789
Ø A(mm)
4360-00044360-00054360-00064360-00074360-00084360-0009
SS304
6360-00046360-00056360-00066360-00076360-00086360-0009
SS316
5501,0001,7002,0002,8003,500
B.L.(1) (kgs)
SIZE(mm)
456789
3,0002,0001,000
600500250
item no.
Material
2360-50052360-50062360-50082360-50102360-5012
SF360LKF
1012162024
B(mm)
2024324048
L(mm)
5.266.358.00
10.0012.52
Ø A(mm)SS316
1,5002,2003,8004,8008,000
B.L.(1) (kgs)
SIZE(mm)
568
1012
3,0001,5001,000
500250F
FF
FF
item no.
Material S360CP
88
101214161820242628323844505664
B(mm)
1216202428323640485256647688
100112128
L(mm)
3456789
10121314161922252832
Ø A(mm)
6360-04236360-04246360-44056360-20066360-20076360-52086360-52096360-04106360-04126360-04136360-04146360-04166360-04196360-04226360-04256360-04286360-0432
SS316
--4360-04244360-44054360-20064360-20074360-52084360-52094360-04104360-04124360-04134360-04144360-04164360-04194360-04224360-04254360-04284360-0432
SS304
400550
1,0001,7002,0002,8003,5004,5006,0006,5007,000
10,00015,00019,00023,00026,00038,000
B.L.(1) (kgs)
SIZE(mm)
3456789
10121314161922252832
4,0003,0002,0001,000
600400300200100125100
5040201510
8
11122
n/an/an/an/an/an/an/an/an/an/an/an/a
PBC
ForgedForgedForgedForgedForgedForgedForgedForgedForgedForged
CastForgedForged
CastForged
CastCast
Pinprocess
item no.
Material SF360CP
SS316
B.L.(1) (kgs)
9001,6002,0003,5005,5007,500
14,000
2360-04042360-04052360-04062360-04082360-04102360-04122360-0416
B(mm)
8101216202432
L(mm)
16202432404864
Ø A(mm)
4568
101216
SIZE(mm)
4568
101216
3,0002,0001,000
500200100
50F
FFFF
FF
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF20
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
ALA
B B
L
Field of applicationD-shackles (square head pin) are designed for application where strong wrench tightening pins are required for a prolong use in a fix location.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ : AISI316 - DIN 1.4401Production : S360B - Shackle - Cast Pin - See chart SF360B - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Technical DataCasting material : AISI304 - DIN 1.4308/ : AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ : AISI316 - DIN 1.4401Production : S360C - Shackle - Cast Pin - See chart SF360C - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)
Technical DataForging material : AISI316 - DIN 1.4401Production : S360CI - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationShackles (oval sink pin) are designed for applicationwhere a continues smooth and round side is required.
Field of applicationShackles (hexagonal sink pin) are designed for application in puplic places where direct malicious manual tampering may occure.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
S360B, SF360BD-shackle(square head pin)
S360C, SF360CD-shackle (oval sink pin)
S360CID-shackle (hexagonal sink pin)
Wrench
Screwdriver
Allen key
S360B, SF360B
S360C, SF360C
S360CI
item no.
Material B.L.(1)
(kgs)
1,7002,8004,5006,000
6360-51066360-51086360-51106360-5112
12162024
B(mm)
24324048
L(mm)
68
1012
ØA(mm)
S360CI SIZE(mm)
68
1012
SS316
1,000500250150
item no.
Material SF360C
SS316
2360-40082360-40102360-40122360-4016
SIZE(mm)
8101216
ØA(mm)
8101216
B(mm)
16202432
L(mm)
32404864
B.L.(1)
(kgs)
3,5005,5007,500
14,000FF
FF
500250150
60
Field of applicationD-shackles (square head pin) are designed for application where strong wrench tightening pinsare required for a prolong use in a fix location.
Technical Data
ScrewdriverS360C, SF360C
D-shackle (hexagonal sink pin) item no.
Material ØA
(mm)
456789
10121316192225
B(mm)
8101214161820242632384450
L(mm)
162024283236404852647688
100
4360-40044360-40054360-40064360-40074360-40084360-40094360-40104360-40124360-40134360-40164360-40194360-40224360-4025
6360-40046360-40056360-40066360-40076360-40086360-40096360-40106360-40126360-40136360-40166360-40196360-40226360-4025
SIZE(mm)
456789
10121316192225
S360C
5501,0001,7002,0002,8003,5004,5006,0006,500
10,00015,00019,00023,000
B.L.(1)
(kgs)Pin
ForgedForgedForgedForgedForgedForgedForgedForged
CastForged
CastCastCast
SS304 SS316
4,0002,0001,000
700500400250150125
60452015
SS304
4360-10044360-10054360-10064360-10074360-10084360-10094360-10104360-10124360-10134360-10164360-10194360-10224360-1025
ØA(mm)
456789
10121316192225
B(mm)
8101214161820242632384450
L(mm)
162024283236404852647688
100
SIZE(mm)
456789
10121316192225
S360B
5501,0001,7002,0002,8003,5004,5006,0006,500
10,00015,00019,00023,000
B.L.(1)
(kgs)Pin
CastCast
ForgedForgedForgedForgedForgedForgedForgedForgedForged
CastCast
6360-10046360-10056360-10066360-10076360-10086360-10096360-10106360-10126360-10136360-10166360-10196360-10226360-1025
SS316
item no.
Material
2360-10082360-10102360-10122360-1016
8101216
SIZE(mm)
16202432
B(mm)
32404864
L(mm)
8101216
ØA(mm)
SF360B
FF
FF
SS316
500200150
50
B.L.(1)
(kgs)
3,5005,5007,500
14,000
4,0002,0001,000
700500400200150125
50402015
* For more information on symbols, refer to page 17.Piece per carton. UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
21
Shackles & Swivels
item no.
Material
item no.
Material
A
B
SS316
S3611 B(mm)
9.5211.9013.5015.9020.6020.6027.0030.2038.1041.30
L(mm)
22263037445060708597
1,000500300200125
9050251512
B.L.(1)
(kgs)
1,2502,4004,1004,9007,3009,900
13,00018,00020,00023,000
6361-13166361-11046361-15166361-13086361-17166361-11026361-15086361-13046361-17086361-1001
ØA(mm)
6.257.809.40
11.0012.5015.7019.0022.2025.4028.50
SIZE(inch)
3/16"1/4"
5/16"3/8"
7/16"1/2"5/8"3/4"7/8"
1"
item no.
Material SS316
S3611BB
1,000500300200125
8045251512
6361-19136361-12146361-12516361-12386361-12716361-12126361-12586361-12346361-12786361-1201
ØA(mm)
6.357.939.52
11.1112.7015.8719.0522.2225.4028.57
B(mm)
9.5211.9013.5015.9020.6020.6027.0030.2038.1041.30
L(mm)
22263037445060708597
1,2502,4004,1004,9007,3009,900
13,00018,00020,00023,000
B.L.(1)
(kgs)SIZE
(inch)
3/16"1/4"
5/16"3/8"
7/16"1/2"5/8"3/4"7/8"
1"
SS316
S2711
6271-36146271-14566271-56386271-38766271-76126271-12586271-58346271-34786271-78016271-0118
ØA(mm)
6.257.809.40
11.0012.5015.7019.0022.2025.4028.50
B(mm)
9.5211.9013.5015.9020.6020.6027.0030.2038.1041.30
L(mm)
25.4031.0036.5042.0049.2055.6068.3084.10
100.00112.70
1,000500300200100
8040252010
1,5002,2003,0004,8007,0008,700
12,00016,00019,00028,000
B.L.(1)
(kgs)SIZE
(inch)
3/16"1/4"
5/16"3/8"
7/16"1/2"5/8"3/4"7/8"
1"
item no.
Material SS316
S2711BB
6271-19736271-85166271-83086271-87166271-81026271-85086271-83046271-87086271-80016271-8118
ØA(mm)
6.357.939.52
11.1112.7015.8719.0522.2225.4028.57
B(mm)
9.5211.9013.5015.9020.6020.6027.0030.2038.1041.30
L(mm)
25.4031.0036.5042.0049.2055.6068.3084.10
100.00112.70
1,000500300150100
7045201510
1,5002,2003,0004,8007,0008,700
12,00016,00019,00028,000
B.L.(1)
(kgs)SIZE
(inch)
3/16"1/4"
5/16"3/8"
7/16"1/2"5/8"3/4"7/8"
1"
AL
B
LA
B
S3611Oversize D-shackle
S2711Oversize anchor shackle
S2711BBOversize anchor shackle(nut and cotter pin)
S3611BBOversize D-shackle (nut and cotter pin)
S3611, S3611BBTechnical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "E.P. " (Electro polished)Production : S3611 - Shackle /Pin- Cast S3611BB - Shackle /Pin- Cast
Field of applicationOversize D-shackles and Oversize D-shackles (nut and cotter pin) are designed for application where extra heavy loads are expected. The pins for oversize type are larger than standard D-shackles. Oversize cotter pin D-shackles are expected as well as secure cotter pin to avoid unexpected loosening by vibration or wind.
VibrationresistantOversize
Technical DataCasting material : AISI316 - DIN 1.4408Production : S2711 - Shackle /Pin- Cast S2711BB - Shackle /Pin- CastSurface treatment : "E.P. " (Electro polished)
VibrationresistantOversize
S2711, S2711BB
Field of applicationOversize anchor shackles are designed for applicationwhere multiple connecting links as well as strongload are expected. Pins for oversize type are largerthan normal.Oversize anchor shackles (nut and cotter pin) are designed for application where multiple connecting links are required as well as a strong heavy load antivibration pin which can withstand continues vibration from wind or movement.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
item no.
Material
heavy loads are expected. The pins for oversize type are larger than standard D-shackles. Oversize cotter pinD-shackles are expected as well as secure cotter pinto avoid unexpected loosening by vibration or wind.
D-shackle
* For more information on symbols, refer to page 17.Piece per carton.22
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
A
B
AL
B
Quickassembly
S361
B.L.(1)
(kgs)SS304
S361RF
4361-30054361-30064361-3088
B(mm)
121318
ØA(mm)
568
L(mm)
21.025.333.0
1,4001,000
450
9501,5002,600
SIZE(mm)
568
item no.
Material SS304
SF361RF
1361-01041361-01051361-01061361-0108
ØA(mm)
4568
B(mm)
10111418
L(mm)
16212533
1,5001,4001,000
450
B.L.(1)
(kgs)
6001,0001,6002,800
SIZE(mm)
4568
B
L
S361Light stamped shackle
SF361RSheet shackle
S361RLight D-shackle
S361RFLight D-shackle (flat screw pin)
Technical DataForging material : AISI304 - DIN 1.4301Production : S361 - Shackle /Pin- ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLight stamped shackles are designed for very light applications where a simple no load tightening shackle is needed.
Light type S361R, SF361RTechnical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301Sheet AISI316 - DIN 1.4401Production : S361R - Shackle - Cast Pin- Forged : SF361R - Shackle - Sheet Pin- ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLight D-shackles and Sheet shackles are designed for simple removable light jobs where load isn't a critical factor.
L LLA
pi
B
L
A A
B
B.L.(1)
(kgs)SS304
S361 B(mm)
10121523
L(mm)
19.623.527.548.0
4,0002,0001,400
350
4361-00044361-00054361-00064361-0008
ØA(mm)
4568
600950
1,6002,600
SIZE(mm)
4568
item no.
Material B.L.(1)
(kgs)SS316
S361R
6361-20056361-20066361-2008
ØA(mm)
568
B(mm)
121318
L(mm)
31.237.046.5
1,4001,000
450
9501,5002,600
SIZE(mm)
568
item no.
Material SS304
SF361R
1361-00041361-00051361-00061361-0008
ØA(mm)
4568
B(mm)
10111418
L(mm)
24.530.737.049.0
2,5001,4001,000
500
B.L.(1)
(kgs)
6001,0001,600 2,800
SIZE(mm)
4568
Light type S361RF, SF361RF
Field of applicationLight D-shackles and Sheet shackles (flat screw pin) are designed for permanent light jobs where load isn't a cirtical factor.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : S361RF - Shackle - Cast Pin- Forged : SF361RF - Shackle - Sheet Pin- ForgedSurface treatment : "E.P. " (Electro polished)
SF361RFSheet shackle (flat screw pin)
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
23
Shackles & Swivels
item no.
Material
B
L
BA
AL
S370Anchor shackle
S370CP, SF370CPAnchor shackle(collared pin)
S371LKAnchor shackle(locking pin)
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S370 - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationAnchor shackles are designed for application wherequick assembly of multiple connecting links are anticipated.
S370 S370SS316
B(mm)
8101216
L(mm)
20.0025.5030.0041.00
6370-00046370-00056370-00066370-0008
ØA(mm)
4568
Quickassembly
S370CP, SF370CPQuickassembly
2,0001,200
800400
SIZE(mm)
4568
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S370CP - Shackle - Cast Pin - See chart SF370CP - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationAnchor shackles (collared pin) are designed for application where a more securely tight pin is required.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S371LK - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationAnchor shackles (locking pin) are designed for application where multiple connecting links are required as well as prevention from accidental dropping of pin.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
S371LK
5501,0001,7002,800
B.L.(1)
(kgs)
item no.
Material S370CP
SS316
6370-30036370-30046370-30056370-30066370-30086370-30106370-30126370-30136370-30146370-30166370-30196370-30226370-30256370-30286370-3032
ØA(mm)
34568
10121314161922252832
B(mm)
88
10121620242628323844505664
PBC
11122
n/an/an/an/an/an/an/an/an/an/a
L(mm)
16.5020.0025.5030.0041.0051.0061.0066.5070.0082.0097.00
110.00125.00140.00160.00
3,0002,0001,200
800400200120100
805030201510
6
SIZE(mm)
34568
10121314161922252832
400550
1,2001,7002,5004,5006,0006,5007,000
10,00015,00019,00023,00026,00038,000
B.L.(1)
(kgs)Pin
ForgedForgedForgedForgedForgedForgedForgedForged
CastForgedForged
CastForged
CastCast
Field of applicationAnchor shackles (collared pin) are designed for application where a more securely tight pin is required.
Technical Data
S371LK
Field of applicationAnchor shackles are designed for application wherequick assembly of multiple connecting links are anticipated.
S370CP, SF370CPQuickassembly
Q
Technical Data
item no.
Material
Anchor Shackle
2370-04042370-04052370-04062370-04082370-04102370-04122370-04132370-0416
FFF
9001,6002,0003,5005,5007,5009,000
14,000
FFFFF
item no.
Material SF370CP
4568
10121316
SIZE(mm)
4568
10121316
ØA(mm)
810121620242632
B(mm)
17.0021.2525.5034.0042.5051.0055.7568.00
L(mm)
2,0001,200
800400200120100
50
SS316
B.L.(1)
(kgs)
item no.
Material SS316
S371LK B(mm)
1012162024
L(mm)
2024324048
6371-01056371-01066371-01086371-01106371-0112
ØA(mm)
4.405.267.128.93
10.75
1,200800500200120
SIZE(mm)
568
1012
1,0001,5002,9004,3006,000
B.L.(1)
(kgs)
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF24
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
A
B
AAL
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S370B - Shackle - Cast Pin - See chart SF370B - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationAnchor shackles (square head pin) are designed for application where multiple connecting links are required as well as a permanent wrench tighten pin.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S370C - Shackle - Cast Pin - See chart SF370C - Shackle/Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationAnchor shackles (over sink pin) are design for application where multiple connecting links are requires as well as a non-intrusive sunken pin.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Wrench
Screwdriver
S370C, SF370CAnchor shackle(oval sink pin)
S370B, SF370BAnchor shackle(square head pin)
S370B, SF370B
S370C, SF370C
SS316B
(mm)
810121620242632384450
L(mm)
20.0025.5030.0041.0051.0061.0066.5082.0097.00
110.00125.00
5501,0001,7002,8004,5006,0006,500
10,00015,00019,00023,000
6370-10046370-10056370-10066370-10086370-10106370-10126370-10136370-10166370-10196370-10226370-1025
ØA(mm)
4568
10121316192225
CastCast
ForgedForgedForgedForgedForgedForgedForged
CastCast
Pin
SS316
SF370B
2370-10082370-10102370-10122370-10132370-1016
ØA(mm)
810121316
B(mm)
1620242832
L(mm)
34.0042.5051.0055.7568.00
3,5005,5007,5009,000
14,000
S370B
FFFFF
2,0001,200
800400200120100
50302015
400200120100
50
SIZE(mm)
810121316
SIZE(mm)
4568
10121316192225
B.L.(1)
(kgs)
B.L.(1)
(kgs)
item no.
Material S370C
SS316
B(mm)
810121620242632384450
L(mm)
20.0025.5030.0041.0051.0061.0066.5082.0097.00
110.00125.00
5501,0001,7002,8004,5006,0006,500
10,00015,00019,00023,000
6370-20046370-20056370-20066370-20086370-20106370-20126370-20136370-20166370-20196370-20226370-2025
ØA(mm)
4568
10121316192225
Pin
ForgedForgedForgedForgedForgedForged
CastCastCastCastCast
2,0001,200
800400200120100
50302015
SIZE(mm)
4568
10121316192225
B.L.(1)
(kgs)
item no.
Material SS316
SF370C L(mm)
34.0042.5051.0055.7568.00
B(mm)
1620242632
ØA(mm)
810121316
2370-20082370-20102370-20122370-20132370-2016
FFFFF
400200120100
50
SIZE(mm)
810121316
3,5005,5007,5009,000
14,000
B.L.(1)
(kgs)
item no.
Material
Field of applicationAnchor shackles (square head pin) are designed forapplication where multiple connecting links are required as well as a permanent wrench tighten pin.
FFFFF
item no
Anchor Shackle
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
item no.
Material
FFFFF
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
25
Shackles & Swivels
item no.
Material
item no.
Material
A
B
A
L
B
L
B
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S362 - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLong D-shackles are designed for application where a quick setup with long reach opening are required.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S362CP - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLong D-shackles (collared pin) are designed for application where a more secure tighthening pin is required.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S362LK - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLong D-shackles (locking pin) are designed for application where a long reach shackle openingas well as anti-dropping pins is required.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
SS316
S362S362
6362-00046362-00056362-00066362-0008
L(mm)
32404864
ØA(mm)
4568
B(mm)
8101216
S362CP
B(mm)
81012162024
L(mm)
324048648096
SS316S362LK
6362-20046362-20056362-20066362-20086362-20106362-2012
ØA(mm)
4.404.405.257.108.90
10.70
2,0001,000
600250120100
SIZE(mm)
4568
SIZE(mm)
4568
1012
5001,0001,7002,500
B.L.(1)
(kgs)
5001,0001,7002,5003,5005,400
B.L.(1)
(kgs)
S362Long D-shackle
S362CPLong D-shackle(collared pin)
S362LKLong D-shackle(locking pin)
item no.
Material S362CP
SS316
B(mm)
81012162024
L(mm)
324048648096
PBC
122333
6362-30046362-30056362-30066362-30086362-30106362-3012
ØA(mm)
4568
1012
SIZE(mm)
4568
1012
5001,0001,7002,5003,5005,400
B.L.(1)
(kgs)
2,0001,000
600250100
80
2,0001,000
600250
Long
S362LKLockingPin
Long D-shackle
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC26
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
item no.
Material
item no.
Material
A
BB
A
L
B
L A
B
S362B, S362C
S360BWN, S360WO
SS316S362C
6362-10046362-10056362-10066362-10086362-10106362-1012
ØA(mm)
4568
1012
B(mm)
81012162024
L(mm)
324048648096
S362BSS316
6362-40046362-40056362-40066362-40086362-40106362-4012
B(mm)
81012162024
L(mm)
324048648096
5001,0001,7002,5003,5005,400
ØA(mm)
4568
1012
Pin
CastCast
ForgedForgedForgedForged
SS316
S360BWN
6360-30096360-3012
ØA(mm)
812
B(mm)
3655
L(mm)
50.060.0
S360WOSS316
6360-90056360-90066360-90086360-90106360-9012
ØA(mm)
568
1012
B(mm)
2524284048
PBC
122
n/an/a
L(mm)
22.536.035.060.072.0
2,8004,000
B.L.(1)
(kgs)
5001,0001,7002,5003,5005,400
B.L.(1)
(kgs)
B.L.(1)
(kgs)
7501,3502,5003,3504,000
B.L.(1)
(kgs)
SIZE(mm)
4568
1012
SIZE(mm)
4568
1012
SIZE(mm)
912
SIZE(mm)
568
1012
S360WOWide D-shackle
S360BWNWide D-shackle (nut and cotter pin)
S362BLong D-shackle(square head pin)
S362CLong D-shackle(oval sink pin)
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S360BWN - Shackle - Cast Pin - Forged : S360WO - Shackle - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationWide D-shackles (nut and cotter pin) and Wide D-shackles are designed for application where large opening shackles as well as a permanent wind/vibration resistant pins are required.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Surface treatment : "E.P. " (Electro polished)Production : S362B - Shackle - Cast Pin - See chart : S362C - Shackle - Cast Pin - Forged
Field of applicationLong D-shackles (square head pin) and Long D-shackles (oval sink pin) are designed for application where a strong wrench tightening pin, as well as a long reach shackle openings are required.
3,0001,600
800350150100
2,0001,000
600250100100
15075
1,000500300100
85
Vibrationresistant Wide
ScrewdriverWrench
item no.
Material
Long D-shackles (square head pin) and Long D-shackles(oval sink pin) are designed for application where a strong wrench tightening pin, as well as a longreach shackle openings are required.
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
27
Shackles & Swivels
item no.
Material
item no.
Material
item no.
Material
A
B
L
S365DLKHalyard shackle (cross bar with locking pin)
Field of applicationHalyard shackles (cross bar with locking pin) are designed specifically for marine application where a quick 180º release pin as well as independent eye end is required.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Production : S365DLK - Shackle/Pin - CastSurface treatment : "E.P." (Electro polished)
S365DLKQuick release
A
B
L
S365LKHalyard shackle (locking pin)
S365LK
Field of applicationHalyard shackles (locking pin) are designed specifically for marine applications where quick 180º releases pin as well as anti-dropping function is required.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S365LK - Shackle/Pin - CastSurface treatment : "E.P." (Electro polished)
Quick releaseSS316
S365LK
6365-00056365-01066365-0008
B(mm)
131622
L(mm)
40.546.064.0
ØA(mm)
568
PBC
223
600500250
1,0001,6002,250
B.L.(1)
(kgs)SIZE
(mm)
568
B(mm)
131622
PBC
223
L(mm)
40.546.064.0
B.L.(1)
(kgs)
1,0001,6002,250
SS316
S365DLK
6365-10056365-10066365-1008
ØA(mm)
568
600400175
SIZE(mm)
568
A
B
C
S364LKHeadboard shackle (cross bar and locking pin)
Field of applicationHeadboard shackles (cross bar and locking pin) are designed for marine application where a quick assembly shackle with independed eye end is required.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S364LK- Shackle - Cast Pin - ForgedSurface treatment : "E.P." (Electro polished)
S364LKQuickassembly
SS316
S364LK ØA(mm)
7.18.9
10.712.4
B(mm)
12162024
PBC
23
n/an/a
C(mm)
11.2515.0018.7522.50
B.L.(1)
(kgs)
1,9003,7005,2006,500
6364-00066364-00086364-00106364-0012
400180120
70
SIZE(mm)
68
1012
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC28
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
item no.
Material
A
B
L
S380Twist shackle
A
B
L
S380CPTwist shackle (collared pin)
Field of applicationTwist shackles and Twist shackles with locking pinare designed for application where a 90º angle twist setup is required.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S380 - Shackle - Cast Pin - Forged S380CP - Shackle - Cast Pin - Forged S380LK - Shackle - Cast Pin - ForgedSurface treatment : "E.P." (Electro polished)
Twist
S380, S380CP, S380LKTwist
item no.
Material
is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Twist Shackle
Competitive challenge
S380LKTwist shackle with locking pin
Kth locking pin
A
B
L
S380SS316
6380-00046380-00056380-00066380-0008
ØA(mm)
4568
B(mm)
8101216
L(mm)
24303644
PBC
1223
B.L.(1)
(kgs)
6651,1001,6002,800
2,0001,000
600505
SIZE(mm)
4568
ØA(mm)
68
B(mm)
1216
L(mm)
3644
B.L.(1)
(kgs)
1,6002,800
SS316
S380LK
6380-50066380-5008
700250
SIZE(mm)
68
ØA(mm)
4568
1012
B(mm)
81012162024
L(mm)
243036445166
B.L.(1)
(kgs)
6651,1001,6002,8004,6006,000
SS316
S380CP
6380-80046380-80056380-80066380-80086380-80106380-8012
2,0001,000
600505200125
SIZE(mm)
4568
1012
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
29
Shackles & Swivels
item no.
Material
item no.
Material
item no.
Material
L
C
T
L
SF3606Shackle key - stamped
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Surface treatment : SF3606 - "E.P. " (Electro polished) : S3607 - "E.P. " (Electro polished) "M.P." (Mirror polished)
Field of applicationShackle keys - stamped are designed for applicationwhere quick tool is needed for a more secure tightening of shackle pin.Shackle keys - cast are designed for application where more secure tightening of shackle pin is required.
SFP3606Shackle key withplastic cover (Blue)
SFP3606Shackle key withplastic cover (White)
S3607Shackle key - cast
Shackle keys are designed specifically to withstand rugged use and harsh environment found at sea.
To keep your shackle key in good condition wash regularly in soapy water. This will avoid undesired build-up of salt.
13mm spanner
10mm spanner
Functions:
Bottle opener
Protective cover
Hole for lanyard
Flat screwdriver
3~8mm spanner
8mm spanner
SFP3606Shackle key withplasti
C
C
C
L
SF3606, S3607, SFP3606C
(mm)
31
L(mm)
100
T(mm)
2.5
SS304
SF3606
4360-6321
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Bottle opener
Spanner
Functions:
Hole for lanyard
Flat screwdriver
1
2
3
4
2
4
3
1
SS316
S3607
6360-7455 (M.P.)6360-7787 (E.P.)
C(mm)
3045
L(mm)
5887
T(mm)
5.05.0
700
1,2001,000
SS316
SFP3606
2360-63202360-6322
C(mm)
3131
L(mm)
100100
T(mm)
2.52.5
33
PBC
250250
SIZE(mm)
4.5*567*87
SIZE(mm)
32*100
SIZE(mm)
32*100(Blue)32*100(White)
item no.
Material
g gShackle keys - cast are designed for application where more secure tightening of shackle pin is required.
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC30
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
item no.
Material
A
B
A
B B
L
Field of applicationSwivels eye and jaw are designed for application where quick assembly with only one end hook or quick link is expected.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S0181 - Pin - Forged Swivel - CastSurface treatment : "E.P. " (Electro polished)
Quickassembly S0181
Field of applicationSwivels with internal hexagonal pin are designed for application where prevention of malicious tampering is required.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S0181I - Pin - See Chart Swivel - CastSurface treatment : "E.P. " (Electro polished)
Allen key S0181I
S018Swivel (eye and eye)
S0181Swivel (eye and jaw)
S0181ISwivel (eye and jaw with internal hexagon pin)
S0181 B.L.(2)
(kgs)SS304 SS316
B(mm)
121620263238
L(mm)
6694
118152188223
4018-10064018-10084018-10104018-10134018-10164018-1019
6018-10066018-10086018-10106018-10136018-10166018-1019
ØA(mm)
68
10131619
1,2001,9003,5005,0008,500
10,000
500200100
502515
PBC
23
n/an/an/an/a
S0181ISS316
B(mm)
121620263238
L(mm)
6694
118152188223
B.L.(2)
(kgs)
1,2001,9003,5005,0008,500
10,000
Pin
ForgedForged
CastCastCastCast
6018-11066018-11086018-13106018-11136018-11166018-1119
ØA(mm)
68
10131619
500200100
502515
PBC
23
n/an/an/an/a
SS304 SS316
S018 ØA(mm)
45689
101316192225
L(mm)
50596694
102118152188223240294
B.L.(1)
(kgs)
450650
1,2001,9003,0003,5005,0008,500
10,00011,50013,000
4018-00044018-00054018-00064018-00084018-00094018-00104018-00134018-00164018-00194018-00224018-0025
6018-00046018-00056018-00066018-00086018-00096018-00106018-00136018-00166018-00196018-00226018-0025
B(mm)
11.013.014.720.522.024.031.038.042.047.063.0
1,200750500200150100
50302010
6
Swivel S018Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S018 - Swivel - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationSwivels eye and eye are designed for application where a quick swivel assembly with hook or quicklink is expected.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
SIZE(mm)
45689
101316192225
SIZE(mm)
68
10131619
SIZE(mm)
68
10131619
3238
188223
8,50010,000
CastCast
6018-11166018-1119
1619
2515
n/an/a
1619
Swivel (eye and jaw)
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
31
Shackles & Swivels
item no.
Material
item no.
Material
item no.
Material
AL
B
S0182Swivel (jaw and jaw)
S0182ISwivel (jaw and jaw with internal hexagon pin)
S0182-0840NSwivel (jaw and jaw with cotter nut pin)
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Production : S0182-0840N - Swivel - Cast Pin - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationSwivels (jaw and jaw with cotter nut pin) are designed for application where a lot of wind and vibration is expected.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
Wrench S0182-0840N
Quickassembly S0182
Field of applicationSwivels (jaw and jaw) are designed for applicationwhere quick assembly on to closed end chains are expected.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4401/ AISI316 - DIN 1.4301Production : S0182 - Swivel - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)
S0182SS304 SS316
B(mm)
121620263238
L(mm)
6694
118152188223
B.L.(1)
(kgs)
1,2001,9003,5005,0008,500
10,000
4018-20064018-20084018-20104018-20134018-20164018-2019
6018-20066018-20086018-20106018-20136018-20166018-2019
ØA(mm)
68
10131619
400125
80402515
PBC
23
n/an/an/an/a
SIZE(mm)
68
10131619
B(mm)
121620263238
L(mm)
66 94118152188223
B.L.(1)
(kgs)
1,2001,9003,5005,0008,500
10,000
Pin
ForgedForged
CastCastCastCast
ØA(mm)
68
10131619
400200
80402515
PBC
23
n/an/an/an/a
S0182ISS316
6018-21066018-21086018-21106018-21136018-21166018-2119
SIZE(mm)
68
10131619
SS304
S0182-0840N B(mm)
16
L(mm)
94
B.L.(1)
(kgs)
1,9004018-2808
ØA(mm)
7.12 125
SIZE(mm)
8
is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
Swivel (jaw and jaw)
Allen key S0182ITechnical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S0182I - Swivel - Cast Pin - See ChartSurface treatment : "E.P. " (Electro polished)
Field of applicationSwivels (jaw and jaw with internal hexagonal pin) are designed for application where malicious tampering are expected.
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC32
Shackles & SwivelsBASIC
S
ERIES
item no.
Material
item no.
Material
LM
C
D
L
D
M
C
Field of applicationSwivel screws are designed to be screw onto an external threaded rod for light lifting purpose. Swivel profile allows easy gripping.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S3062/E1 - Swivel - CastSurface treatment : "E.P. " (Electro polished)
S3062/E1Swivel screw
S3062/E2Swivel cross screw
Swivel cross screw
S3062/E1SS316
6306-21086306-2536
C(mm)
1515
ØD(mm)
6.56.5
M(thread)
M85/16"UNF
L(mm)
37.537.5
500500
S3062/E2SS316
C(mm)
1515
ØD(mm)
6.56.5
M(thread)
M85/16"UNF
L(mm)
37.537.5
6306-22086306-2526
Field of applicationSwivel cross screws are designed to be screw onto an external threaded rod for light lifting purpose. Cross swivel profile allows easy gripping of two loose ends.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S3062/E2 - Swivel - CastSurface treatment : "E.P. " (Electro polished)
S3062/E2
S3062/E1
1,0001,000
SIZE(mm/inch)
85/16"UNF
SIZE(mm/inch)
85/16"UNF
Field of applicationSwivel screws are designed to be screw onto an external threaded rod for light lifting purpose. Swivel profile allows easy gripping.
Swivel screw
Swivel screw
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
33
Shackles & Swivels
item no.
Material
item no.
Material
B
L
M
L
S260Wire rope clip (AISI standard)
S261Wire rope clip - light type
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S261 - Clip - Cast U-bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationWire rope clips - light type are designed for ropes who's tensioning application isn't as critical as of AISI standard. Two wire clip is expected per assembly.
Light Type S261
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S260 - Clip - Cast U-bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationWire rope clips (AISI standard) are designed for application where a secure grip is needed. Two wire clip are expected per assembly.
S260
Wire rope clips (AISI standard) are designed for application where a secure grip is needed. Two wire clip are expected per assembly.
SS316SS304
S260 L(mm)
16.017.521.023.029.032.040.050.062.067.078.083.096.0
105.0
M(mm/inch)
M2M3M3M4M5M6M8
M10M12M12M14M145/8"5/8"
4260-01504260-00024260-00034260-00044260-00054260-00064260-00084260-00104260-00124260-00144260-00164260-00194260-00224260-0025
6260-01506260-00026260-00036260-00046260-00056260-00066260-00086260-00106260-00126260-00146260-00166260-00196260-00226260-0025
B(mm)
5.07.08.0
10.012.014.017.521.026.028.032.034.040.044.0
6,0003,0002,5001,2001,000
600300200100100
755025
20
SIZE(mm)
1.52.03.04.05.06.08.0
10.012.014.016.019.022.025.0
SS316
S261 L(mm)
17.521.023.025.032.035.044.055.065.075.083.094.0
112.0
M(mm/inch)
M3M3M4M5M6M6M8
M10M10M12M12M145/8"
6261-00026261-00036261-00046261-00056261-00066261-00086261-00106261-00136261-00166261-00196261-00226261-00256261-0032
B(mm)
7.08.0
10.012.013.816.020.025.028.034.036.041.050.0
3,0002,5002,0001,000
600500250150100
75504030
SIZE(mm)
234568
10131619222532
BASIC
S
ERIES
* For more information on symbols, refer to page 17.Piece per carton.34
Wire ropes & ThimblesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
item no.
Material
item no.
Material
item no.
Material
E
M B
L
L
O
SF511Simplex clip
SF512Duplex clip
S7350, SF7350Quick link
S7360 Triangle quick link
Technical DataForging material : AISI316 - DIN 1.4401Production : S7350 - Link - Forged SF7350 - Link - Forged S7360 - Link - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationQuick links are designed for application where a quick connecting piece is needed between two chain eye or hook with eye end. Triangle quick links are designed for application wherea joint piece is needed between a sythetic rope anda hook or chain.
Quick link
B
D
O
S7350, SF7350, S7360
SS316
S7360
6736-00066736-0010
D(mm)
610
O(mm)
7.512.0
L(mm)
5687
500150
SS316
S7350
6785-00356735-00706735-00096735-00106735-0012
B(mm)
10.015.518.520.023.0
ØD(mm)
3.57.09.0
11.012.0
O(mm)
4.58.5
11.012.015.0
L(mm)
35.066.080.089.0
104.5
1,600500250200100
SS316
SF7350
22233
PBC
SS316
SF511
6511-00206511-00036511-00046511-00056511-00066511-0008
E(mm)
8.211.013.015.018.525.0
L(mm)
15.017.021.025.030.036.5
M(mm)
M4M4M5M5M6M8
B(mm)
4.07.09.2
11.013.017.5
6,0004,0001,0002,0001,000
600
FFFFFF
SIZE"for cable"
234568
SS316
SF512 M(mm)
M4M4M5M5M6M8
6512-00026512-00036512-00046512-00056512-00066512-0008
B(mm)
5.07.09.2
11.013.017.5
L(mm)
30.034.040.050.060.075.0
2,0001,500
700500400150
FFFFFF
E(mm)
9.011.413.516.019.025.5
SIZE"for cable"
234568
SIZE(mm)
3.57.09.0
10.012.0
2735-00042735-00052735-00062735-0008
B(mm)
11.012.514.017.0
D(mm)
4568
O(mm)
5.56.57.5
10.0
L(mm)
39.548.557.074.0
2,0001,200
800300
FFFF
SIZE(mm)
4568
SIZE(mm)
610
item no.
Material
FFFFFF
Duplex clip
Technical DataCasting material : AISI316 - DIN 1.4408Production : SF511 - Clip- Forged SF512 - Clip- ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationSimplex clips are designed for wire rope who needs a simple loop setup. It is not designed for heavy tensioning applications.Duplex clips are designed for wire rope who require a simple loop setup. Both screws must be securely tightened. Do not use in application where heavey load is expected.
SF511, SF512
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
35
Wire ropes & Thimbles
item no.
Material
item no.
Material
item no.
Material
item no.
Material
SS316
SF234U
6234-00026234-00036234-00046234-00056234-00066234-00086234-10106234-10126234-10146234-10166234-10186234-00206234-00226234-0025
B(mm)
10.012.513.015.517.022.526.031.034.037.540.045.050.554.0
T(mm)
0.81.01.21.21.51.52.02.02.52.53.03.04.04.0
L(mm)
25.028.533.036.540.051.058.568.074.083.092.0
104.0115.0125.0
234568
1012141618202225
Dia Ø Cable(mm)
SS316SF414
6404-03166414-04016414-06156414-08036414-02016414-08056414-04036414-07086414-0001
B(mm)
18.023.327.329.038.045.050.857.065.5
L(mm)
43.056.063.073.092.0
106.0125.0139.8157.5
T(mm)
1.01.52.02.54.04.05.06.06.0
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"7/8"
1"
Dia Ø Cable(inch)
SIZE(inch)
3/16"1/4"
5/16" 3/8"1/2"5/8"3/4"7/8"
1"
T
B
SF234ULight thimbles
B
L
S2343Opened end thimbles
B
L
S2344Closed end thimbles
T
L
SF414Heavy thimbles
Technical DataForging material : AISI316 - DIN 1.4401Production : SF234U - Thimble - Forged SF414 - Thimble - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLight thimbles are designed for application where secure loop for wire rope is needed.Heavy thimbles are designed for applicationswhere heavy loops and load are expected.
item no.
Material
thimbles
S2343, S2344
SF234U, SF414
SS304S2343
4234-30064234-30084234-30104234-30124234-30164234-30204234-30224234-3025
B(mm)
16.022.428.034.044.054.059.068.0
L(mm)
35.547.358.067.091.0
112.0120.0134.0
Dia Ø Cable(mm)
68
101216202225
SS304S2344
4234-40024234-40034234-40044234-40064234-40084234-40104234-40124234-40144234-40164234-40194234-40224234-4025
B(mm)
81012162428353945546070
L(mm)
21.026.032.043.058.572.086.0
100.8110.0124.0130.0148.0
Dia Ø Cable(mm)
23468
10121416202225
5,0003,5002,0001,5001,000
500300300130100
60504030
1,000500300160
8050252014
1,000650300200
75403020
5,0002,5001,500
600300150
756040352520
Technical DataCasting material : AISI304 - DIN 1.4308Production : S2343 - Thimble - Cast S2344 - Thimble - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationOpened end thimbles are designed for application where extra heavy loads are expected.Closed end thimbles are designed for application where extra heavy loads are expected. Close end thimbles helps to avoids any deformation of thimbles.
SIZE(mm)
234568
1012141618202225
SIZE(mm)
68
101216202225
SIZE(mm)
23468
10121416192225
Light type Oversize
item no.
Material
secure loop for wire rope is needed.Heavy thimbles are designed for applicationswhere heavy loops and load are expected.
Heavy thimbles
* For more information on symbols, refer to page 17.Piece per carton.36
Wire ropes & ThimblesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
B
T
C
Instruction of S661
1 2 3
C
B
T
S10(C - link)
S661Connecting link
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S10 - Link - Cast S661 - Link - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationC-Links are designed for application where a simpleelongation of chain are needed. C-Link are notdesigned for heavy loads.Connecting links are designed for application where a elongation fitting is needed to extend an existing chain. Connecting link are not to be used as a permanent fixture.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
For Assembly
S10, S661
SS316S661
6661-03166661-01046661-05166661-03086661-07166661-01026661-05086661-0304
B(mm)
8.510.512.015.016.518.524.028.5
C(mm)
17.0020.8024.0028.2532.5036.7548.00 56.50
T(mm)
5.06.08.09.5
11.012.516.019.0
B.L.(1)
(kgs)
550800
1,4501,9002,5503,2005,5008,000
3,0001,250
600400250200100
50
SIZE(inch)
3/16"1/4"
5/16"3/8"
7/16"1/2"5/8"3/4"
SS316SS304
S10
4100-00054100-00064100-00084100-00094100-00104100-00114100-00134100-00164100-00194100-00224100-0025
6100-00056100-00066100-00086100-00096100-00106100-00116100-00136100-00166100-00196100-00226100-0025
B(mm)
7.59.0
12.013.515.016.519.524.028.533.037.5
C(mm)
20243236404452647688
100
T(mm)
5.06.08.09.0
10.011.013.016.019.023.026.5
B.L.(1)
(kgs)
230300550750850950
1,4002,0502,5003,0004,750
3,0001,500
700500300250150100
503020
SIZE(mm)
5689
10111316192225
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
37
Wire ropes & Thimbles
Technical DataType of material : AISI316Construction : 1x19 Type of lay : RHRL (Right hand regular lay)
Field of application316 Stainless Steel 1x19 wire is used primarilyfor a yacht standing rigging.
Technical DataType of material : AISI316Construction : 7x7 Type of lay : RHRL (Right hand regular lay)
Field of applicationStainless Steel 7x7 wire rope configuration providesan excellent balance between flexibility and strength.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 6 load characteristics
Field of application316 Stainless Steel 1x19 wire is used primarilyfor a yacht standing rigging.
SWR 1x19 Wire rope 1x19
SWR 1x19
SWR 7x7 Wire rope 7x7
SWR 7x7
item no.
Material B.L.(1)
(kgs)
500720
1,2852,0002,8764,6407,560
10,890
6119-25356119-33056119-43056119-53056119-63056119-83056119-13056119-1235
SWR 1x19SS316
2.53.04.05.06.08.0
10.012.0
DIA(mm)
305305305305305305305305
Length/Reel(m)
3.104.467.93
12.4017.8031.7049.7071.30
App w.t(kg/100m)
9.4613.6024.1937.8254.2996.69
150.98217.47
App w.t(kg/reel)
item no.
Material B.L.(1)
(kgs)
235428612907
1,4182,0403,6325,1757,445
612907
1,4182,8454,185
6700-72036700-72536700-73036700-74036700-75036700-76036700-78036700-73056700-72356700-78016700-73256700-71636700-74016700-7165
SWR 7x7SS316
2.02.53.04.05.06.08.0
10.012.01/8"
5/32"3/16"
1/4"5/16"
DIA(mm)
305305305305305305305305305305305305305305
Length/Reel(m)
1.578.243.546.299.83
14.2025.2039.3056.70
2.804.306.20
10.6016.70
App w.t(kg/100m)
4.792.70
10.8019.1829.9843.3476.86
119.87172.94
8.5413.1218.9132.3350.94
App w.t(kg/reel)
* For more information on symbols, refer to page 17.Piece per carton.38
Wire ropes & ThimblesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material B.L.(1)
(kgs)
200378544959
1,5092,1813,8745,3757,750
544959
1,3093,4405,375
6701-92036701-92536701-93036701-94036701-95036701-96036701-98036701-91036701-91236701-98016701-93256701-91636701-94016701-9165
SWR 7x19SS316
2.02.53.04.05.06.08.0
10.012.01/8"
5/32"3/16"
1/4"5/16"
DIA(mm)
305305305305305305305305305305305305305305
Length/Reel(m)
1.702.703.426.099.52
13.8024.3038.1054.80
2.904.506.50
11.0017.30
App w.t(kg/100m)
5.198.24
10.4318.5829.0442.0974.12
116.21167.14
8.8513.7319.8333.5552.77
App w.t(kg/reel)
Field of applicationStainless steel 7x19 wire rope configuration providesthe most flexible solution for applications where many tight cornering of wire rope is expected.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 6 load characteristics
Technical DataType of material : AISI316Construction : 7x19 Type of lay : RHRL (Right hand regular lay)
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 6 load characteristics
SWR 7x19 Wire rope 7x19
SWR 7x19
* For more information on symbols, refer to page 17.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
39
Wire ropes & Thimbles
item no.
Material
item no.
Material
item no.
Material
item no.
Material
L
B
O
B
L
B
A
O
O
B
Technical DataCasting material : AISI316 - DIN 1.4408Production : S323H - Hook - Cast S330 - Hook - Cast Pin - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationGrap hooks (eye end) are designed for application where heavy loads are expected. The small opening of the clevis limits functionality but increases it's load strength.Grap hooks (clevis end) are designed for heavy application where an open end is required for assembly onto a chain.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S323H, S330
SS316S325X
6325-51046325-55166325-53086325-5121
O(mm)
22242837
Ø B(mm)
13161824
L(mm)
91.0108.0124.5161.0
B.L.(1)
(kgs)
1,5002,9003,2005,400
150100
5030
S323HGrab hook (eye end)
S330Grab hook (clevis end)
S325Slip hook (eye end)
S325XSlip hook (eye end with safety latch)
Technical DataCasting material : AISI316 - DIN 1.4408Production : S325 - Hook - Cast S325X - Hook - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationSlip hooks (eye end) are designed for light loads with versatility in mind. The open hook system allows easy loading and unloading of lifted hook/chain systems.Slip hooks (eye end with safety latch) with safety latch are designed for application where a lot of movement may occur. Safety latch prevents accidental fall out of inserted hook/chain systems.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
S325, S325XSS316
S325
6325-00146325-00516325-00386325-0012
O(mm)
22242837
Ø B(mm)
13161824
200100
6030
L(mm)
91.0108.0124.5161.0
B.L.(1)
(kgs)
1,5002,9003,2005,400
SS316
S323H
6323-21046323-25166323-23086323-21026323-2508
O(mm)
8.711.112.716.619.8
Ø B(mm)
13.014.517.022.527.0
250125
804020
L(mm)
77.690.0
103.6136.2169.1
B.L.(1)
(kgs)
2,9003,7005,8007,000
13,000
Ø A(mm)
9.511.512.717.0
150906030
O(mm)
8.711.112.716.6
L(mm)
79.696.0
108.6143.7
B(mm)
11.112.715.019.0
B.L.(2)
(kgs)
2,1003,1004,0007,350
SS316
6330-01046330-05166330-03086330-0102
S330
SIZE(inch)
1/4"5/16"3/8"1/2"5/8"
SIZE(inch)
1/4"5/16"3/8"1/2"
SIZE(inch)
1/4"5/16"3/8"1/2"
SIZE(inch)
1/4"5/16"3/8"1/2"
22242837
131618
91.0108.0124.5161.0
1,5002,9003,2005,400
150100
5030
6325 53086325-5121ng load
racteristics
3/81/2"
1824
* For more information on symbols, refer to page 17.Piece per carton.40
Hooks & SnapsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
item no.
Material
item no.
Material
L
B B
O
O
A
Technical DataCasting material : AISI316 - DIN 1.4408Production : S331 - Hook - Cast Pin - See chart S331X - Hook - Cast Pin - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationSlip hooks (clevis end) are designed for easy loadingand unloading of hook/chain systems. Clevis endallows easy assembly to chain with out extra fittings.Slip hooks (clevis end with safety latch) are designed for quick assembly onto chain without extra fitting and provices security for accidental fall out of inserted chain/hook system.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Production : S4322 - Hook/Swivel - Cast S2511 - Hook/Swivel - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationSlip hooks (swivel end with safety latch) are designedfor application where turning is expected. Safety latch prevents accidental fall out of inserted hook/chain system.Heavy slip hooks (swivel end with safety latch) are designed for application where mid air turning of lifted load is expected. Safetly latch prevents from accidental fall out of insereted chain/hook system.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S331 B.L.(1)
(kgs)SS316
6331-01046331-05166331-03086331-0102
Ø A(mm)
9111216
O(mm)
22.524.530.036.0
L(mm)
100.0112.0131.5165.5
2,0003,1004,0005,600
120704025
S331XSS316
Ø A(mm)
9111216
125704025
O(mm)
22.524.530.036.0
L(mm)
100.0112.0131.5165.5
B.L.(1)
(kgs)
2,0003,1004,0005,600
6331-11046331-15166331-13086331-1102
SS316
S4322
6432-21046432-25166432-23086462-2102
O(mm)
22.524.028.536.0
B(mm)
22.027.528.035.7
100754020
L(mm)
119.0141.5160.5199.5
SS316
S2511
6251-10016251-1114
O(mm)
23.529.5
B(mm)
28.035.7
7525
L(mm)
150.0198.0
B.L.(2)
(kgs)
2,0004,000
B
L
O
B
S4322, S2511
S331, S331X B(mm)
11.112.715.019.0
B(mm)
11.112.715.019.0
SIZE(inch)
1" 1.1/4"
S331Slip hook (clevis end)
S4322Slip hook (swivel end with safety latch)
S2511Heavy slip hook (swivel end with safety latch)
S331XSlip hook (clevis end with safety latch)
Swivel Swivel
OversizeB.L.(2)
(kgs)
1,7002,6003,8505,600
SIZE(inch)
1/4"5/16"3/8"1/2"
SIZE(inch)
1/4"5/16"3/8"1/2"
SIZE(inch)
1/4"5/16"3/8"1/2"
( )
23.529.5
( )
28.0 7525
( )
150.0198.0
( g )
2,0004,000
yd
tch) turning
ents fromsystem.
ng load
cteristics
6251-1114 1.1/4" 35.7 1
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
41
Hooks & Snaps
item no.
Material
item no.
Material
B
O
O
O1
OL
Technical DataCasting material : AISI304- DIN 1.4308/ AISI316 - DIN 1.4408Production : S225 - Snap - Cast : S225SQ - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationBolt snaps (swivel end) are designed for a quick and easy attachment of an object such as key. The roundswivel end allows fitting onto a chain. Bolt snap (square swivel end) allow the snap to be knitted onto synthetic textiles.
Field of applicationDouble locking safety hooks are designed for application where close contact with hook is expected. Double safety avoids accidental opening of latch.
Note:(1) Standard safety factor for working load
is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Production : S2432 - Hook - CastSurface treatment : "E.P." (Electro polished)
B
L
O
L
Field of applicationBolt snaps (double snap end) are designed for application where a quick and easy fitting is needed to join two loose chains. Bolt snaps (hook end) are designed for applicationwhere a simple fitting is needed to join two loose chain or ropes.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S161, S162, S163 - Snap - Cast : S231, S232, S245 - Snap - CastSurface treatment : "E.P. " (Electro polished)
S225, S225SQ
S161, S162, S163S231, S232, S245
S225Bolt snap (swivel end)
S225SQBolt snap (square swivel end)
S161, S162, S163Bolt snap (double snap end)
S231, S232, S245Bolt snap (hook end)
S2432Double locking safety hook
S2432
SS304 SS316
S225 L(mm)
63758591
120
4225-03084225-01024225-05084225-03044225-1104
6225-03086225-01026225-05086225-03046225-1104
B.L.(1)
(kgs)
180250650650550
1,0001,000
500500170
B(mm)
11.013.517.020.533.0
O(mm)
6.37.08.08.0
13.7
B.L.(2)
(kgs)
180500
SS316
S225SQ
6225-1318
O(mm)
7.0
B(inch)
1"
L(mm)
80
SIZE(inch)
3/8"1/2"5/8"3/4"1!"
item no.
Material SS316
S161 B.L.(1)
(kgs)
1805006161-0312
O(mm)
6.5
L(mm)
90
SIZE(inch)
3.1/2"item no.
Material SS316
S162 B.L.(1)
(kgs)
3504006162-0004
O(mm)
10
L(mm)
100
SIZE(inch)
4"item no.
Material SS316
S163 B.L.(1)
(kgs)
3603006163-0434
O(mm)
11.5
L(mm)
120
SIZE(inch)
4.3/4"item no.
Material SS316
S231 B.L.(1)
(kgs)
1905006231-3102
O(mm)
10
O1(mm)
8
L(mm)
90
SIZE(inch)
3.1/2"item no.
Material SS316
S232 B.L.(1)
(kgs)
2402006232-4140
O(mm)
10
O1(mm)
9.5
L(mm)
105
SIZE(inch)
4.1/4"
item no.
Material
item no.
Material SS316
S245 B.L.(1)
(kgs)
3752006245-5000
O(mm)
14
O1(mm)
13
L(mm)
130
SIZE(inch)
5"
SIZE(inch)
1”3.1/8”
SS316
S2432 B.L.(1)
(kgs)
1,5506243-1019
O(mm)
20 125
ØB(mm)
20
L(mm)
109 3
PBC
SIZE(mm)
19
* For more information on symbols, refer to page 17.Piece per carton.42
Hooks & Snaps
Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
item no.
Material
item no.
Material
B
O
B
OO
L
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S2311 - Hook - Cast : S461 - Hook - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationSafety snap hooks (with safety latch) are designed for light loads with wide open hook for insert. Safetylatch prevents accidental fall out of inserted chain/hook system.Heavy safety snap hooks (with safety latch) are designed for heavier loads than standard design. Wide open hook makes insertion of hook/chain easy. Safety latch prevents accidental fall out of inserted systems.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S2470 - Snap - Cast : S2471 - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationSpring snaps (eye end) are designed as a quick and easy fitting for assembly with keys or other objects.Spring snaps (hook end) are designed to be hammered in for sailing cloth.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S2311Safety snap hook (with safety latch)
S2470Spring snaps (eye end)
S2471Spring snaps (hook end)
S461Heavy safety snap hook (with safety latch)
Hammer
OB
L
SS316
S461 B.L.(1)
(kgs)
1,1006461-0090
O(mm)
26
Ø B(mm)
19
L(mm)
90 250
SS304 SS316
S2311S2311, S461
4231-10194231-1028
6231-10196231-1028
O(mm)
20.423.8
Ø B(mm)
1928
L(mm)
100119
200150
B.L.(1)
(kgs)
7501,000
S2470, S2471
SS304
S2471 B.L.(1)
(kgs)
250350700
4247-10504247-10654247-1090
L(mm)
506590
O(mm)
12.816.622.8
1,000500150
B(mm)
8.58.7
11.5
SS304 SS316
S2470 B.L.(1)
(kgs)
80220500900
1,5001,200
500150
L(mm)
32507098
O(mm)
7101420
--4247-00504247-00704247-0100
6247-00326247-00506247-00706247-0100
B(mm)
4.06.69.0
13.8
n/a233
PBC
33
PBC
SIZE(mm)
90
SIZE(mm)
1928
SIZE(mm)
325070
100
SIZE(mm)
506590y g
is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Spring snaps (eye end)
70090 22.8 15011.5
Spring snaps (hook end)
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
43
Hooks & Snaps
Plastic Back Card. PBC
item no.
Material
item no.
Material
item no.
Material
item no.
Material
O
LD
O
L
O O
D
Field of applicationSpring snaps - type1 (circular hook with opened end)provides an easy fitting to joining of two ropes or eye ends fittings.Spring snaps (circular hook with angled latch) with angular pin provides a more comfort opening of the spring during operation.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV class 2 load characteristics
Technical DataForging material : AISI304- DIN 1.4301/ AISI316 - DIN 1.4401Production : SF24302 - Snap - Forged SF24302B - Snap - ForgedSurface treatment : "E.P." (Electro polished)
Technical DataForging material : AISI316 - DIN 1.4401Production : SF2431 - Snap - Forged SF2431X - Snap - ForgedSurface treatment : "E.P." (Electro polished)
Field of applicationSpring snaps - type2 (circular hook with opened end)provides a quick and easy solution to joining twowire or ropes.Spring snaps - type2 (circular hook with welded bar end) with welded end bar provides a quick and easy solution to joining of two wire or eye ends. Welded end bars provides the location for knitting of leather or synthetic rope.
SF2431Spring snaps - type2(circular hook with opened end)
SF2431XSpring snaps - type2 (circular hook with welded bar end)
SF24302Spring snaps - type1 (circular hook with opened end)
SF24302BSpring snaps (circular hook with angled latch)
SS316
SF2431 O(mm)
15222528
6243-10066243-10086243-10106243-1012
B.L.(1)
(kgs)
8001,4502.8503,600
1,000350150100
L(mm)
6080
100120
Ø D(mm)
68
1012
SS316
SF2431X O(mm)
15222528
6243-11066243-11086243-11106243-1112
Ø D(mm)
68
1012
L(mm)
6080
100120
500350150100
B.L.(1)
(kgs)
8001,6502,8503,600
SF24302 Ø D(mm)
68
1012
L(mm)
6080
100120
O(mm)
11.516.019.028.0
B.L.(1)
(kgs)
8301,6002,5003,300
700350150100
SF24302B Ø D(mm)
68
1012
L(mm)
6080
100120
B.L.(1)
(kgs)
8301,6002,5003,300
SF2431, SF2431X
SF24302, SF24302B
O(mm)
14202429
700350150100
SIZE(mm)
68
1012
SIZE(mm)
68
1012
SIZE(mm)
68
1012
SIZE(mm)
68
1012
SS304
4243-02064243-02084243-02104243-0212
SS316
6243-02066243-02086243-02106243-0212
SS304
4243-12064243-12084243-02114243-1212
SS316
6243-12066243-12086243-02116243-1212
bar end) with welded end bar provides a quick and easy solution to joining of two wire or eye ends. Welded end bars provides the location for knittingof leather or synthetic rope.
* For more information on symbols, refer to page 17.Piece per carton.44
Hooks & SnapsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
item no.
Material
item no.
Material
L
O
D
O
L
O
Field of applicationSpring snaps (angled hook with eye end) are designed for application where minimum movement of hook is required during loading process.Spring snaps (angled hook and latch with eye end) are designed for comfort during opening of latch while angled hook is designed to minimize movement during loading process.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF2430 - Snap - Forged SF2430B - Snap - ForgedSurface treatment : "E.P. " (Electro polished)
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF24301 - Snap - Forged SF24301B - Snap - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationSpring snaps (circular hook with eye end) provides a quick and easy fitting to be linked with chain or other hooks.Spring snaps (circular hook, angled latch with eye end)is designed for comfort to the opening of the latch while eye end for assembly onto rope or quick links.
D
O
SF24301Spring snaps (circular hook with eye end)
SF24301BSpring snaps (circular hook, angled latch with eye end)
SF2430Spring snaps (angled hook with eye end)
SF2430BSpring snaps (angled hook and latch with eye end)
Spring snaps (circular hook, angled latch with eye end)is designed for comfort to the opening of the latchwhile eye end for assembly onto rope or quick links.
Spring snaps
SF24301, SF24301B
SF2430, SF2430B
SS316
SF24301SS304
6243-01066243-01086243-01106243-0112
B(mm)
10121519
Ø D(mm)
68
1012
L(mm)
6080
100120
O(mm)
1318 21 27
B.L.(1)
(kgs)
8301,6002,5003,300
600300150100
4243-01064243-01084243-01104243-0112
SIZE(mm)
68
1012
SF24301B B(mm)
10121519
Ø D(mm)
68
1012
L(mm)
6080
100120
O(mm)
1318 21 27
600300150100
B.L.(1)
(kgs)
8301,6002,5003,300
SS304
4243-01264243-01284243-01214243-0122
SS316
6243-01266243-01286243-01216243-0122
SIZE(mm)
68
1012
BB B
B
SF2430 B.L.(1)
(kgs)
7501,7502,2503,650
500300150100
SS304
4243-00064243-00084243-00104243-0012
SS316
6243-00066243-00086243-00106243-0012
B(mm)
10121519
Ø D(mm)
68
1012
L(mm)
6181
102122
O(mm)
12.517.023.528.0
SS316
SF2430B B.L.(1)
(kgs)
7501,7502,2503,650
500300150100
B(mm)
10121519
Ø D(mm)
68
1012
L(mm)
6181
102122
SS304
4243-03064243-03084243-03104243-0312
6243-03066243-03086243-03106243-0312
SIZE(mm)
68
1012
SIZE(mm)
68
1012
O(mm)
12.517.023.528.0
* For more information on symbols, refer to page XVI.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
45
Hooks & Snaps
item no.
Material
item no.
Material
item no.
Material
item no.
Material
item no.
Material
item no.
Material
item no.
Material
B
OD
B
LO
1
oL
D
D
O
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Production : S247A - Snap - Cast S247H - Snap - Cast SF878 - Snap - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationChain snaps (closed end) are designed to be usedfor a quick and easy assembly to two separate loose chains.Chain snaps (opened end) are designed for quick and easy linking of two seperate loose chains.Chain snaps (double hook end) are designed for a quick and easy setup with two loose chains or fittings.
S247AChain snaps(closed end)
S2450, SF2450Snap hook
S2450X, SF2450XSnap hook (with eye)
S247HChain snaps(opened end)
SF878Chain snaps(double hook end)
Technical DataForging material : AISI316- DIN 1.4408Production : S2450, SF2450 - Snap - Forged S2450X, SF2450X - Snap - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationSnap hooks are the standard in use for the assembly of two loose end chain or ropes. Snap hooks (with eye) are the standard in use to linktwo loose chain or ropes. Eye end provides extra security for synthetic ropes or wires.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S2450, SF2450
S247A, S247H, SF878
S2450X, SF2450X
SS304
S247A
4247-7206
O(mm)
11 500
D(mm)
6
L(mm)
80
B.L.(1)
(kgs)
120
SS304
S247H
4247-7106
O(mm)
10.3
O1(mm)
8 600
L(mm)
75
B.L.(1)
(kgs)
180
SS304
SF878
4878-00064878-0008
O(mm)
1214
600350
D(mm)
6.89.4
L(mm)
75.298.0
B.L.(1)
(kgs)
300550
SIZE(mm)
68
SIZE(mm)
6
SIZE(mm)
6
SS316
S2450
6245-00046245-00076245-00096245-00116245-00126245-0013
O(mm)
11.520.526.535.040.046.0
Ø B(mm)
6.69.5
12.819.022.022.0
Ø D(mm)
4.58.09.0
11.011.013.0
L(mm)
33567298
116134
2,500600250120100
70
B.L.(1)
(kgs)
100400700900
1,0001,200
SS316
SF2450
2245-00052245-00602245-00802245-0100
O(mm)
16.018.023.530.0
Ø B(mm)
8101317
Ø D(mm)
568
10
L(mm)
40486480
1,5001,000
300200
B.L.(1)
(kgs)
160300600800
SS316
S2450X
6245-02046245-02076245-02096245-02116245-02126245-0213
O(mm)
11.520.526.535.040.046.0
Ø B(mm)
6.58.0
11.018.020.020.0
Ø D(mm)
4.58.09.0
11.011.013.0
L(mm)
33567298
116134
2,500550300120100
70
B.L.(1)
(kgs)
100400700900
1,0001,200
SS316
SF2450X
2245-02052245-02062245-02082245-0210
O(mm)
16.018.023.530.0
Ø B(mm)
79
1216
Ø D(mm)
568
10
L(mm)
40486480
1,000800400200
B.L.(1)
(kgs)
160300600800
2n/an/an/an/a
3
PBC
PBC
223
n/a
PBC
1n/an/an/an/a
3
PBC
223
n/a
SIZE(mm)
479
111213
SIZE(mm)
568
10
SIZE(mm)
479
111213
SIZE(mm)
568
10
item no.
Material
item no.
Material
Note: Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Snap hook
* For more information on symbols, refer to page XVI.Piece per carton.46
Hooks & Snaps
Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
B
L
Technical DataCasting material : AISI316 - DIN 1.4408Production : S369 - Snap - Cast S369X - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationLocking snaps (angled hook) are designed for application where minimum swivel movement is required duringloading process.Locking snaps (angled hook with eye end) are designed for application where minimum swivel movement is required during loading process.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Be careful the wire rope slide out from the snap
S2490Heavy spring snaps(angled hook)
S369Locking snaps(angled hook)
S2490XHeavy spring snaps(angled hook with eye end)
S369XLocking snaps(angled hook with eye end)
Technical DataForging material : AISI316 - DIN 1.4401Production : S2490 - Snap - Forged S2490X - Snap - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationHeavy spring snaps (angled hook) provides a larger opening for more assembly of hooks and eye ends in the same hook. Heavy spring snaps (angled hook with eye end) provide a larger opening as well as space for more fittings of hook and eye end to be assembled. Eye end allows secure straping of synthetic rope or wire ropes.
D
LB
O
B
O D
SS316
S2490
6249-0009
O(mm)
18
Ø D(mm)
9
L(mm)
90
B.L.(1)
(kgs)
1,000
SS316
S2490X
6249-0109
O(mm)
18
Ø D(mm)
9
Ø B(mm)
11
L(mm)
90
B.L.(1)
(kgs)
1,000
SIZE(mm)
9
SIZE(mm)
9
S2490, S2490X
S369, S369X
n/a
n/a
item no.
Material
item no.
Material
SS316
S369
6369-0110
O(mm)
30
Ø D(mm)
11
L(mm)
108
B.L.(1)
(kgs)
1,850
SS316
S369X
6369-1111
O(mm)
30
ØD(mm)
11
Ø B(mm)
16
L(mm)
108
B.L.(1)
(kgs)
1,850
SIZE(mm)
11
SIZE(mm)
11 125
125
eye end) provide a larger opening as well as space for more fittings of hook and eye end to be assembled. Eye end allows secure straping of synthetic rope or wire ropes.
Snap hook
* For more information on symbols, refer to page XVI.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
47
Hooks & Snaps
item no.
Material
O
L
B
O
O
B
L
B
OTechnical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Production : S249 - Snap - Cast S251 - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationEye snaps (fixed ring) are designed for application where a rigid eye end to be strap on to leather belt and a wide open hook for easy insertion is required.Eye snaps (swivel end) are designed specificly for flexibility in use in multiple settings.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Technical DataCasting material : AISI304 - DIN 1.4308Production : S830 - Snap - Cast S840 - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationLight eye snaps (swivel end) provides a quick and easy solution to a snap fitting. Swivel eye end provides maximum flexibility.Eye snaps (rectangular swivel end) provides the functionality of a thumb opening with square swivels for knitting of synthetic or leather straps.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
S249 O(mm)
10.015.017.023.5
Ø B(mm)
10161919
L(mm)
53.573.081.598.0
B.L.(1)
(kgs)
160200300450
1,000500400200
SIZE(mm)
0123
SS304
4249-00004249-00014249-00024249-0003
SS316
6249-00006249-00016249-00026249-0003
item no.
Material S251 O
(mm)
10.013.015.520.5
Ø B(mm)
16.519.520.519.5
L(mm)
69.085.099.0
117.5
B.L.(1)
(kgs)
200170250340
600500300200
SIZE(mm)
0123
SS304
4251-00004251-00014251-00024251-0003
SS316
6251-00006251-00016251-00026251-0003
item no.
Material S251 O
(mm)
9.011.514.014.0
Ø B(mm)
11.013.517.020.5
L(mm)
55708389
B.L.(1)
(kgs)
180240325325
1,000600500450
SIZE(inch)
3/8"1/2"5/8"3/4"
SS304
4830-03084830-01024830-05084830-0304
item no.
Material S840 O
(mm)
6.0
Ø B(mm)
13
L(mm)
60
B.L.(1)
(kgs)
50600
SIZE(inch)
1/2''SS304
4840-0102
S249, S251
S830, S840
S249Eye snaps (fixed ring)
S251Eye snaps (swivel end)
S830Light eye snaps (swivel end)
S840Eye snaps (rectangular swivel end)
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Light eye snap (swivel end)
6.013 60 506001/2''
* For more information on symbols, refer to page XVI.Piece per carton.48
Hooks & SnapsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
O
L
O
L B
O
BB
O
B
Technical DataCasting material : AISI304- DIN 1.4308/ AISI316- DIN 1.4408Production : S5014 - Snap - Cast S5013 - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationTiger snaps (rectangular swivel end) combines the maximum opening of hook with rectangular swivel for knitting of leather or synthetic straps.Tiger snaps (swivel end) provides the maximum opening of snaps during operation. Swivel end extends it's flexibility.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Production : S3142 - Snap - Cast S333 - Snap - Cast S3143 - Snap - Cast S334 - Snap - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationBull snaps (eye swivel end) are designed for heavy duty snap use. The latch is opened outwards with two finger operation. Large swivel allows extra assembly of chains and hooks to it's swivel. Bull snaps (rectangular swivel end) provides the extra heavy duty application of a snap, with two finger operation latch pulled outward for accidental pushing. Square swivels provides for knitting of leather or synthetic belts.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S5014, S5013
S3142, S333, S3143, S334
S3142, S333Bull snaps (eye swivel end)
S3143, S334Bull snaps (rectangular swivel end)
S5013Tiger snaps (swivel end)
item no.
Material S5014 O
(mm)
12
Ø B(mm)
25.4
L(mm)
70
B.L.(1)
(kgs)
200500
SIZE(inch)
1''SS304
4501-4001SS316
6501-4001
item no.
Material S5013 O
(mm)
1212
Ø B(mm)
13.016.8
L(mm)
66.569.5
B.L.(1)
(kgs)
200200
600500
SIZE(inch)
1/2''5/8"
SS304
4501-31024501-3508
SS316
6501-31026501-3508
item no.
Material S3142 O
(mm)
17
Ø B(mm)
25.5
L(mm)
100
B.L.(1)
(kgs)
650180
SIZE(inch)
7/8" X 4"SS316
6314-2874item no.
Material S333 O
(mm)
20
Ø B(mm)
30
L(mm)
130
B.L.(1)
(kgs)
1,080100
SIZE(inch)
1" X 5"SS316
6333-0105item no.
Material S3143 O
(mm)
20
Ø B(mm)
29
L(mm)
130
B.L.(1)
(kgs)
1,080100
SIZE(inch)
1.1/8" X 4"SS316
6314-3118item no.
Material S334 O
(mm)
20
Ø B(mm)
29
L(mm)
120
B.L.(1)
(kgs)
1,080100
SIZE(inch)
1.1/8" X 5"SS316
6334-1185
S5014Tiger snaps (rectangular swivel end)
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
49
Hooks & Snaps
item no.
Material Technical DataForging material : AISI304 - DIN 1.4301Production : SF268 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationS-Hooks (type 1) are designed for a quick and easy setup for poster or lables to be hanged from a fixed wire rope or pipe.
Technical DataForging material : AISI304 - DIN 1.4301Production : SF875 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationS-hooks (type 2) are designed for application where a quick and easy fitting is needed for hanging of a poster or label in a fixed wire.
Technical DataForging material : AISI304 - DIN 1.4301Production : SF880 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationS-hooks (type 3) are designed for quick and easy hanging of poster or pictures onto a horizontal pole or wire.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
SF268SS304
4268-00024268-00034268-00044268-00054268-00064268-00084268-1085
SIZE(mm)
02019030300403605043060500806710085
Ø D(mm)
234568
10
Ø R(mm)
3.754.506.007.007.50
10.0012.50
Ø R1(mm)
3.758.009.50
10.5012.5016.5020.50
L(mm)
19303643506785
B.L.(1)
(kgs)
152550
120140250435
SF268
SF268S-hook (type 1)
SF880S-hook (type 3)
SF875S-hook (type 2)
SF875
SF880
15,0002,5001,5001,300
800400200
item no.
Material SF875
SS304
4875-04004875-00054875-00064875-00084875-00094875-00104875-0012
SIZE(mm)
45689
1012
Ø D(mm)
45689
1012
Ø R(mm)
4.04.56.08.09.09.0
11.0
Ø R1(mm)
4.04.56.08.09.09.0
11.0
L(mm)
4050607585
100120
B.L.(1)
(kgs)
60150200400650800
1,150
1,200900600300200150100
item no.
Material SF880
SS304
4880-60804880-61204880-61604880-62004880-6240
SIZE(mm)
60806120616062006240
Ø D(mm)
66666
Ø R(mm)
12.517.522.522.522.5
Ø R1(mm)
12.517.522.522.522.5
L(mm)
80120160200240
B.L.(1)
(kgs)
150100
908080
600250150150130
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S-hook (type 3) Window Display
DL
R R R
D
LR1 R1
R1
L
* For more information on symbols, refer to page 17.Piece per carton.50
Hooks & SnapsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SFUSS304
4000-00324000-00334000-0034
SIZE(mm)
610061506200
Ø D(mm)
666
Ø R(mm)
10.510.510.5
L(mm)
100150200
500400300
item no.
Material SFJSS304
4000-61504000-62004000-62504000-6300
SIZE(mm)
615062006250 6300
Ø D(mm)
6666
Ø R(mm)
10.510.510.510.5
L(mm)
150200250300
500400300300
item no.
Material SFHSS304
4006-01504006-02004006-02504006-03004009-01504009-02004009-03004013-03004013-04504331-35004013-06004013-1000
SIZE(mm)
0615006200062500630009150092000930013300134501350013600
131000
Ø D(mm)
6666999
1313131313
Ø R(mm)
10.5010.5010.5010.5010.2510.2510.2512.5012.5012.5012.5012.50
L(mm)
150200250300150200300300450500600
1,000
600450300250250200150
5060504025
DD
Technical DataForging material : AISI304 - DIN 1.4301Production : SFJ - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationJ - Hooks are designed to be inserted into soil or wood to hold a string of a camping tent or an object in place.
RR
R
Hammer
Technical DataForging material : AISI304 - DIN 1.4301Production : SFU - Bar - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationU-bars are designed for insertion into soil or wood by hammering, this is used to secure a tent or other objects in place.
Hammer
SFU
SFJ
D
L
SFUU-bar
SFJJ-hook
SFHClosed eye bar
Technical DataForging material : AISI304 - DIN 1.4301Production : SFH - Bar - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationClosed eye bars are designed to be inserted with hammer into soil or wood to withhold the strings of a tent or other objects in place.
Hammer
SFH
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
51
Hooks & Snaps
item no.
Material
item no.
Material
item no.
Material
S311EESS316SS304
L(mm)
124154210257325390510124154210257325390510
L1(mm)
7090
120150200250300
7090
120150200250300
M(thread)
M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-22056311-22066311-22086311-22106311-22126311-22166311-00206311-00056311-00066311-00086311-00096311-00126311-00166311-0019
SIZE(mm)
5.06.08.0
10.012.016.020.0
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
6801,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,500
500250150n/an/an/an/an/a250n/an/a50
n/an/a
4311-22054311-22064311-22084311-22104311-22124311-22164311-00204311-00054311-00064311-00084311-00094311-00124311-00164311-0019
S311HESS316SS304
L(mm)
10398
124162210256330400495124162210256330400495
L1(mm)
60457090
120150200250300
7090
120150200250300
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-33046311-10456311-33056311-33066311-33086311-33106311-33126311-33166311-33206311-10056311-10066311-10086311-10096311-10126311-10166311-1019
SIZE(mm)
4.04.55.06.08.0
10.012.016.020.0
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
100130130350650800
1,4002,4003,500
130350650800
1,4002,4003,500
1,0001,000
500250150100
502015
500250150100
501215
4311-33044311-10454311-33054311-33064311-33084311-33104311-33124311-33164311-33204311-10054311-10064311-10084311-10094311-10124311-10164311-1019
S311HHSS316SS304
L(mm)
124170208266335415485124170208266335415485
L1(mm)
7090
120150200250300
7090
120150200250300
M(thread)
M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-44056311-44066311-44086311-44106311-44126311-44166311-44206311-11056311-11066311-11086311-11096311-11126311-11166311-1119
SIZE(mm)
5.06.08.0
10.012.016.020.0
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
130350650800
1,4002,4003,500
130350650800
1,4002,4003,500
500250150100
502015
500250150100
502015
4311-44054311-44064311-44084311-44104311-44124311-44164311-44204311-11054311-11064311-11084311-11094311-11124311-11164311-1119
M
L1L
S311EEFrame turnbuckle, eye and eye
S311HEFrame turnbuckle, hook and eye
S311HHFrame turnbuckle, hook and hook
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S311EE - Frame - Cast Eye - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle, eye and eye provides tensioningof two loose open ends.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4308Forging material : AISI304 - DIN 1.4401/ AISI316 - DIN 1.4301Production : S311HE - Frame - Cast Hook/Eye - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle, hook and eye provides tensioning of one fixed end with hook and one open end.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S311HH - Frame - Cast Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle, hook and hook provides simple tensioning of two closed ends.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S311EE
S311HE
S311HH
* For more information on symbols, refer to page 17.Piece per carton.52
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material
item no.
Material
item no.
Material
S311NEESS316
L(mm)
102124154210257325390510124154210257325390510
L1(mm)
607090
120150200250300
7090
120150200250300
M(thread)
M4M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-67046311-70056311-70066311-70086311-70106311-70126311-70166311-70206311-67056311-67066311-67086311-67096322-67126311-67166311-6719
SIZE(mm)
4568
10121620
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
475680
1,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,500
1,000500250150100
502515
500250150100
501515
S311NHESS316
L(mm)
103124162210256330400495124162210256330400495
L1(mm)
607090
120150200250300
7090
120150200250300
M(thread)
M4M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-68046311-71056311-71066311-71086311-71106311-71126311-71166311-71206311-68056311-68066311-68086311-68096311-68126311-68166311-6819
SIZE(mm)
4568
10121620
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
100130350650800
1,4002,4003,500
130350650800
1,4002,4003,500
1,000500250150100
502515
500250150100
502015
S311NHHSS316
L(mm)
103124170208266335415485124170208266335415485
L1(mm)
607090
120150200250300
7090
120150200250300
M(thread)
M4M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
6311-69046311-72056311-72066311-72086311-72106311-72126311-72166311-72206311-69056311-39066311-69086311-69096311-69126311-69166311-6919
SIZE(mm)
4568
10121620
3/16"1/4"
5/16"3/8"1/2"5/8"3/4"
B.L.(1)
(kgs)
100130350650800
1,4002,4003,500
130350650800
1,4002,4003,500
1,000500250150100
502015
500150150100
502015
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311NEE - Frame - Cast Eye - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle with nut, eye and eye provides a locking function after the fittings are securely tightened.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311NHE - Frame - Cast Hook/Eye - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle with nut, hook and eye providesextra locking function after turnbuckle has beentightened.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311NHH - Frame - Cast Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckle with nut, hook and hook providesextra locking function after the turnbuckle has been securely tightened.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
S311NHE
S311NHH
S311NEE
item no.
Material
Field of applicationFrame turnbuckle with nut, eye and eye providesa locking function after the fittings are securely tightened.
T h i l DS311NHE
Frame turnbuckle with nut, eye and eye
L1 L
S311NEEFrame turnbuckle with nut, eye and eye
S311NHEFrame turnbuckle with nut, hook and eye
S311NHHFrame turnbuckle with nut, hook and hook
M
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
53
Terminals & Turnbuckles
item no.
Material
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311JJ - Frame - Cast Jaw - Forged Accessory - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckles, jaw and jaw (metric thread) are designed to tighten two loose end while turning of the frame body itself.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S312 - Frame - Cast Jaw - Forged Accessory - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckles, jaw and jaw (inch thread) are specially designed for the U.S. market.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
S311JJFrame turnbuckle,jaw and jaw (metric thread)
S312Frame turnbuckle,jaw and jaw (inch thread)
S311JEFrame turnbuckle,jaw and eye
L
ML1
M L
L1L1
S311JJ
S312
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311JE - Frame - Cast Jaw - Forged Eye - Welded Accessory - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckles, jaw and eye are designed to tighten two loose end while turning of the frame body itself.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV- class 1 load characteristics
S311JE
L1
LLM
MMML1
LMM
S311JESS316
L(mm)
120145190235310235360473
L1(mm)
7090
120150200150250300
450250150
80408015
n/a
M(thread)
M5M6M8
M10M123/8"M16M20
Accessory
RingRingRingRingRingRing
Cotter pinCotter pin
6311-62056311-62066311-62086311-62106311-62126311-62386311-62166311-6220
SIZE(mm/inch)
568
1012
3/8"1620
B.L.(1)
(kgs)
6801,5002,3003,1004,4002,5008,000
11,000
item no.
Material S311JJ
SS316
L(mm)
114137179220296275328436
L1(mm)
7090
120150200170200300
M(thread)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6311-64056311-64066311-64086311-63106311-63126311-63146311-63166311-7719
SIZE(mm)
568
1012141620
B.L.(2)
(kgs)
7501,4002,2003,4505,0006,4008,000
10,500
500300150
8050251510
item no.
Material S312
SS316
L(mm)
114137179220296296328436
L1(mm)
7090
120150200200200300
M(thread)
3/16"1/4"
5/16"3/8"1/2"
1/2"UNC5/8"3/4"
Accessory
RingRingRingRingRingRing
Cotter pinCotter pin
6312-00056312-00066312-00086312-00106312-00126312-00136312-00166312-0119
SIZE(inch)
3/16"1/4"
5/16"3/8"1/2"
1/2"UNC5/8"3/4"
B.L.(2)
(kgs)
7501,4002,2003,4505,0005,0008,000
10,500
500300150
8050401510
y factor for working loadng load.
V - class 3 load characteristics
Pipe turnbuckle
* For more information on symbols, refer to page 17.Piece per carton.54
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF312PJE
SS316
L(mm)
119146176209260299383
L1(mm)
8090
105125150190210
M(thread)
M5M6M8
M10M12M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pin
6312-34056312-34066312-34086312-34106312-34126312-34166312-3420
SIZE(mm)
568
10121620
B.L.(1)
(kgs)
6801,4002,2003,1004,4008,000
10,000
n/a500300150
60n/an/a
SF312PEEPipe turnbuckle, eye and eye
SF312PHHPipe turnbuckle, hook and hook
SF312PJEPipe turnbuckle, jaw and eye
L L
M
L1
L1M
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PEE - Eye - WeldedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, eye and eye are designed forcircular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
SF312PHEPipe turnbuckle, hook and eye
SF312PEE
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PHH - Hook - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, hook and hook are designed for circular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
SF312PHH
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PJE - Jaw - Forged Eye - Welded Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, jaw and eye are designed for circular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
SF312PJE
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PHE - Hook - Forged Eye - WeldedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, hook and eye are designed forcircular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
SF312PHE
item no.
Material SF312PEE
SS316
L(mm)
137164191235280360407
L1(mm)
8090
105125150190210
M(thread)
M5M6M8
M10M12M16M20
6312-31056312-31066312-31086312-31106312-31126312-31166312-3120
SIZE(mm)
568
10121620
B.L.(1)
(kgs)
6801,5002,3003,1004,4008,000
10,000
600300200100
502515
item no.
Material SF312PHE
SS316
L(mm)
137164196235288362399
L1(mm)
8090
105125150190210
M(thread)
M5M6M8
M10M12M16M20
6312-32056312-32066312-32086312-32106312-32126312-14166312-0020
SIZE(mm)
568
10121619
B.L.(1)
(kgs)
130350650800
1,4002,4003,500
600300175100
502015
item no.
Material SF312PHH
SS316
L(mm)
134.5168.0190.0230.0288.0357.0395.0
L1(mm)
8090
105125150190210
M(thread)
M5M6M8
M10M12M16M20
6312-33056312-33066312-33086312-33106312-33126312-00216312-0022
SIZE(mm)
568
10121620
B.L.(1)
(kgs)
130350650800
1,4002,4003,500
600250200100
502015
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
55
Terminals & Turnbuckles
item no.
Material SF312P
SS316
L(mm)
115142160200245280304350445
L1(mm)
8090
105125150165190210250
M(thread)
M5M6M8
M10M12M14M16M20M24
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pinCotter pin
6312-05056312-05066312-05086312-05106312-05126312-05146312-06166312-92206312-0524
SIZE(mm)
568
101214162024
B.L.(1)
(kgs)
7501,4002,2003,4505,0006,4008,000
10,50014,500
500250150100
50352012
8
L
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312P - Jaw - Forged Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, jaw and jaw are designed forcircular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312/7 - Eye/Jaw - Forged Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, jaw and eye are designed for circular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
4444
n/an/an/an/an/a
PBC
SF312P
SF312/7
SF3127P
Jaw
Jaw
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3127P - Eye - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, eye and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.
Note:(3) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
item no.
Material SF312/7
SS316
L(mm)
130135165200240270295340
L1(mm)
8090
105125150165190210
M(thread)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6312-70056312-70066312-70086312-70106312-70126312-70146312-70166312-7020
SIZE(mm)
568
1012141620
B.L.(2)
(kgs)
7501,4002,2003,4505,0006,4008,000
10,500
500300150100
50352012
4444
n/an/an/an/a
PBC
FFFFFFFF
item no.
Material SF3127P
SS316
L(mm)
125135165185225255275338
L1(mm)
8090
105125150165190210
M(thread)
M5M6M8
M10M12M14M16M20
6312-77056312-77066312-77086312-77106312-77126312-77146312-77166312-7720
SIZE(mm)
568
1012141620
B.L.(3)
(kgs)
7501,0002,2003,0005,0006,1008,000
10,500
1,000400200100
80352515
FFFFFFFF
SF312PPipe turnbuckle,jaw and jaw
SF312/7Pipe turnbuckle,jaw and eye
SF3127PPipe turnbuckle,eye and eye
L1
LMM
L
L1
ote: Sta da d sa ety acto o o g oad is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Pipe turnbuckle jaw and jaw
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF56
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
57
Terminals & Turnbuckles
item no.
Material S3125/7
SS316
L(mm)
135140175210245280310367
L1(mm)
8090
105125150165190210
M(thread)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6312-58056312-58066312-58086312-58106312-58126312-57146312-57166312-5120
SIZE(mm)
568
1012141620
B.L.(2)
(kgs)
500900
1,6502,5003,7005,0006,9509,600
500250150100
50352515
4444
n/an/an/an/a
PBC
item no.
Material S3125
SS316
L(mm)
131148180220258295335385
L1(mm)
8090
105125150165190210
M(thread)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6312-10526312-50066312-50086312-50106312-50126312-10616312-50166312-5020
SIZE(mm)
568
1012141620
B.L.(2)
(kgs)
500900
1,6502,5003,7005,0006,9509,600
350200140
7535251510
FFFFFFFF
item no.
Material S312/5
SS316
L(mm)
124150170205265280335375124150170205265335
L1(mm)
8090
105125150165190210
8090
105125150190
M(thread)
M5M6M8
M10M12M14M16M203/16"1/4"
5/16"3/8"'1/2"5/8"
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
RingRingRingRingRing
Cotter pin
6312-40056312-40066312-40086312-40106312-40126312-40146312-10546312-40206312-46136312-44016312-46156312-48036312-42016312-4805
SIZE(mm/inch)
568
1012141620
3/16"1/4"
5/16"3/8"1/2"5/8"
B.L.(2)
(kgs)
500900
1,6502,5003,7005,0006,9509,600
500900
1,6502,5003,7006,950
350200150
7535251512
350200100
753515
4444
n/an/an/an/an/an/an/an/an/an/a
PBC
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S3125/7 - Eye - Forged Toggle - Cast Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, eye and toggle are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S3125 -Toggle - Cast Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, toggle and toggle are designedfor circular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
L
L1
S3125/7
S312/5
S3125
Toggle
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S312/5 -Swivel toggle - Cast Jaw - Forged Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, toggle and jaw are designed forcircular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Toggle
Toggle
M
S3125/7Pipe turnbuckle,eye and toggle
S312/5Pipe turnbuckle,toggle and jaw
S3125Pipe turnbuckle,toggle and toggle
L1
L
ML
L1L1M
item no.
Material
Pipe turnbuckles, toggle and jaw are designed forcircular appearance of turnbuckle while concealingthe threads within the pipe for aesthetic reasons.
Toggle
Pipe turnbuckle toggle and toggle
item no.
Material SF3121/7
SS316
L(mm)
156163200238284312360410
L1(mm)
8090
105125150165190210
M(thread)
M5M6M8
M10M12M14M16M20
OD(mm)
5.56.37.59.1
12.514.316.117.8
Dia Ø Cable(mm)
2.53.04.05.06.07.08.0
10.0
6312-10636312-10556312-10516312-10566312-10576312-10586312-10596312-1785
SIZE(mm)
568
1012141620
B.L.(1)
(kgs)
6001,0001,4002,2004,0005,4006,5008,500
600400200100
50503515
4444
n/an/an/an/a
PBC
item no.
Material S3121P
SS316
L(mm)
415462
L1(mm)
210210
M(thread)
M203/4"UNC
OD(mm)
17.821.4
6312-14156312-1068
SIZE(mm/inch)
10*M201/2"*3/4"UNC
B.L.(1)
(kgs)
6001,000
FFFFFFFF
M
OD
L1
L1
L
M
ODOD
L
SF3121/7Pipe turnbuckle, eye and swage stud
S3121P, SF3121P Pipe turnbuckle, jaw and swage stud
item no.
Material
Pipe turnbuckle, jaw and swage stud
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3121/7 - Eye - Forged Terminal - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, eye and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swagingmachine.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 4 load characteristics
SF3121/7
Technical DataForging material : AISI316 - DIN 1.4401Production : S3121P - Jaw - Forged Terminal - Forged Nut - Cast Accessory - See chart SF3121P - Jaw/Nut - Forged Terminal - Forged Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, jaw and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swaging machine.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
S3121P, SF3121PAccessory
Cotter pinRing
Dia Ø Cable(mm)
10 1/2"
item no.
Material SF3121P
SS316
L(mm)
150170205240295325370405
151.5142185210
297.25303328380414610155156170178205205240247295310
L1(mm)
8090
105125150165190210
808090
105150150165190210250
80809090
105105125125150150
M(thread)
M5M6M8
M10M12M14M16M20M5M5M6M8
M12M12M14M16M20M24 M5M5M6M6M8M8
M10M10M12M12
OD(mm)
5.56.37.59.1
12.514.316.117.8
5.56.37.59.1
14.316.116.117.821.428.2
5.56.36.37.57.59.19.1
12.512.516.1
6312-10176312-10166312-10186312-10096312-10106312-10116312-10706312-10712312-10686312-11226312-10506312-10642312-10726312-10982312-10732312-10746312-14552312-14616312-10656312-10076312-10086312-60286312-10236312-10156312-10276312-10066312-10406312-1041
SIZE(mm/inch)
568
1012141620
2*M53*M54*M65*M8
7*M128*M128*M14
10*M1612*M2016*M24
3/32"*M51/8"*M51/8"*M6
5/32"*M65/32"*M8 3/16"*M8
3/16"*M101/4"*M101/4"*M12
5/16"*M12
B.L.(1)
(kgs)
6001,0001,4002,2004,0005,4006,5008,500
600600
1,0001,4004,5004,5006,0008,200
12,50018,500
600600
1,0001,0001,4001,4002,2002,2004,0004,000
600350200100
50303015
600600350200n/a40
n/an/an/an/a600600350350500200125
755040
4444
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
PBCAccessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
RingRingRingRingRingRing
Cotter pinCotter pinCotter pinCotter pin
RingRingRingRingRingRingRingRingRingRing
Dia Ø Cable(mm)
2.53.04.05.06.07.08.0
10.02.53.04.05.07.08.08.0
10.012.016.0
3/32"1/8"1/8"
5/32"5/32"3/16"3/16"1/4"1/4"
5/16"
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF58
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
59
Terminals & Turnbuckles
item no.
Material S312P/4
SS316
L(mm)
220275330400425
L1(mm)
105125150190190
M(thread)
M8M10M12M16M16
6312-41086312-41106312-41126312-41686312-4116
SIZE(mm)
4568
10
B.L.(1)
(kgs)
500900
1,9002,2003,300
16080602015
M
L1
L1
LM
L
S3121/5Pipe turnbuckle,toggle and swage stud
S312P/4Pipe turnbuckle,jaw and swageless terminal
S3125P/4Pipe turnbuckle,toggle and swageless terminal
LM
L1
LM
LL1L1
S312
L1
OD
L
M
item no.
Turnbuckle
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S312P/4 - Jaw - Forged Swageless terminal - Cast Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, jaw and swageless terminal are designed for tightening of one loose end to a wirerope. The wire rope is assembled without a swaging machine.
S312P/4
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S3121/5 - Swivel toggle - Cast Terminal - Forged Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, toggle and swage stud are designedfor tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swaging machine.
S3121/5
Technical DataCasting material : AISI316 - DIN 1.4408Production : S3125P/4 - Toggle - Cast Swageless terminal - Cast Accessory - See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, toggle and swageless terminal are designed for tightening of one loose end to a wire rope. The wire rope is assembled without a swaging machine.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
S3125P/4
item no.
Material S3121/5
SS316
L(mm)
155172171210216246296328310386422416156180191211216244260308327
L1(mm)
809090
105105125150165150190210190
809090
105105125125150150
M(thread)
M5M6M6M8M8
M10M12M14M12M16M20M16M5M6M6M8M8
M10M10M12M12
OD(mm)
5.56.37.57.59.19.1
12.514.316.116.117.817.8
5.56.37.57.59.19.1
12.512.516.1
6312-50476312-10446312-10766312-10456312-10776312-10356312-10366312-10376312-10756312-10386312-10396312-10746312-10536312-10026312-10296312-10046312-10036312-10306312-10016312-10326312-1031
SIZE(mm/inch)
2.5 3 4 4 5 5 6 7 8 8
10 12
3/32" 1/8"
5/32" 5/32" 3/16" 3/16" 1/4" 1/4" 5/16"
B.L.(1)
(kgs)
6001,0001,0001,4001,4002,2004,0005,4004,0006,5008,5006,500
6001,0001,0001,4001,4002,2002,2004,0004,000
400250200150125100
504050251512
600250200150150100
755050
4444
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
PBCAccessory
RingRingRingRingRingRingRing
Cotter pinRing
Cotter pinCotter pinCotter pin
RingRingRingRingRingRingRingRingRing
Dia Ø Cable(mm)
2.53.04.04.05.05.06.07.08.08.0
10.010.0
3/32"1/8"
5/32"5/32"3/16"3/16"1/4"1/4"
5/16"
Accessory
RingRingRing
Cotter pinCotter pin
item no.
Material S3125P/4
SS316
L(mm)
230285335415440
L1(mm)
105125150190190
M(thread)
M8M10M12M16M16
6312-54086312-54106312-54126312-54176312-5416
SIZE(mm)
4568
10
B.L.(1)
(kgs)
500900
1,9002,2003,300
15080502020
Accessory
RingRingRing
Cotter pinCotter pin
item no.
Material S3400
SS316
ØA(mm)
5689
12141616
B(mm)
5.56.59.0
11.012.013.015.020.0
ØC(mm)
5.36.88.5
10.013.215.016.516.5
L(mm)
354149587892
116158
6340-00056340-00066340-00086340-00106340-00126340-00146340-00166340-0020
SIZE(mm)
568
1012141620
B.L.(1)
(kgs)
1,0001,2501,7003,1004,6505,7508,1509,400
1,8001,000
600350150100
8030
112
n/an/an/an/an/a
PBCPin
ForgedForgedForgedForgedForgedForgedForged
Cast
item no.
Material SF312P/MIN
SS316
L(mm)
8495
110122164
L1(mm)
4050606080
M(thread)
M4M5M6M8
M10
6312-08046312-08056312-08066312-08086312-0810
SIZE(mm)
4568
10
B.L.(1)
(kgs)
500750
1,4002,2003,450
1,500700300200125
333
n/an/a
PBC
item no.
Material SF3121P/MIN
SS316
L(mm)
107133147191
L1(mm)
50606080
M(thread)
M5M6M8
M10
6312-10206312-10216312-1022 6312-1019
SIZE(mm)
568
10
B.L.(1)
(kgs)
7501,2502,2003,450
800450300100
44
n/an/a
PBC
L1L1
M
L
M
L
SF312P/MINMini pipe turnbuckle,jaw and jaw
SF3121P/MINMini pipe turnbuckle,jaw and swage terminal
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312P/MIN - Jaw - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationMini pipe turnbuckles, jaw and jaw are specially designed to be used in interior where space is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 3 load characteristics
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3121P/MIN - Jaw - Forged Terminal - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationMini pipe turnbuckles, jaw and swage terminal are specially designed to be used in interior where space is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles. The swage end must use a swaging machine for proper swaging of wire.
Note:(3) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
SF312P/MIN
SF3121P/MIN
Mini Type
Mini Type
147191
606312 1022 6312-1019
810
stics
rged
are space kes ckles..or
ad
stics
Mini pipe turnbuckle
M8M10
2,2003,450
300100
n/an/a
6080
S3400
S3400Turnbuckle toggle
C
B
L A
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S3400 - Toggle - Cast Pin - See chartSurface treatment : "E.P. " (Electro polished)
Field of applicationTurnbuckle toggles are designed to be inserted into jaw of any corresponding size of turnbuckle for 180 degrees movement.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Removable Pin
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC60
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF3122P/MIN
SS316
L(mm)
121156168220
L1(mm)
50606080
M(thread)
M5M6M8
M10
Dia Ø Cable(mm)
3456
6312-21056312-21066312-2108 6312-2110
SIZE(mm)
568
10
B.L.(1)
(kgs)
1,0001,2501,2502,350
800350250125
item no.
Material SF3122P
SS316
L(mm)
180200240275335365435480200248308366431534
L1(mm)
8090
105125150165190210
90105125150190210
M(thread)
M5M6M8
M10M12M14M16M20"1/4"
5/16"3/8"1/2"5/8"3/4"
Dia Ø Cable(mm)
2.53.04.05.06.07.08.0
10.01/8"
3/16"1/4"
5/16"3/8"1/2"
6312-20056312-20066312-20086312-20106312-20126312-20146312-20166312-24806312-21816312-23156312-21436312-25116312-23856312-2213
SIZE(mm/inch)
568
1012141620
1/8" 3/16" 1/4"
5/16" 3/8"
1/2"
B.L.(1)
(kgs)
6001,0001,4002,2004,0005,4006,5008,5001,0001,4002,2004,5006,5008,500
700350250120
60402020
350200
75403015
item no.
Material SF3122PK
SS316
L(mm)
200225255280300340370
L1(mm)
90105125150 165190210
M(thread)
M6M8
M10M12M14M16M20
6312-22066312-22086312-22106312-22126312-22146312-22166312-2220
SIZE(mm)
68
1012141620
B.L.(1)
(kgs)
1,4002,2003,4505,0006,4008,000
10,500
250250100
60n/a3520
item no.
Material S311K
SS316
L(mm)
160200240280330310410500
L1(mm)
7090
120150200170250300
M(thread)
M5M6M8
M10M12M14M16M20
6311-66056311-66066311-66086311-64106311-64126311-64146311-65166311-6520
SIZE(mm)
568
1012141620
B.L.(2)
(kgs)
7501,4002,2003,4505,0006,4008,000
10,500
500250150100
50202015
M
L
L1
L1
L
M
SF3122P/MINMini pipe turnbuckle,swage terminal and swage terminal
SF3122PKPipe turnbuckle,stud and stud
SF3122PPipe turnbuckle,swage terminal
S311KFrame turnbuckle,stud and stud
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S311K - Frame - Cast Stud - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFrame turnbuckles, stud and stud are specially designed for an application where the two loose holes are encountered. Both ends must be properlywelded to the loose holes.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page 44 - class 21 load characteristics
S311K
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3122PK - Stud - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, stud and stud are specially designedfor application where two loose holes are encountered. Both ends must be properly welded to the loose holes.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 6 load characteristics
SF3122PK
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3122P - Terminal - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationPipe turnbuckles, swage terminal are specially designed for application where two loose end of wire are encountered. Both ends must be properly swaged using a swaging machine.
SF3122P
class 21
M
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3122P/MIN - Pipe - Forged Terminal - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationMini pipe turnbuckles, swage terminal and swage terminal are specially designed to be used in interior where space is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles. The swage end must use a swaging machine for proper swaging of wire.
SF3122P/MINMini Type
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
61
Terminals & Turnbuckles
item no.
Material SF7801L
SS316
L(mm)
8697
115128162178175214225284328387
85909097
106118108116124113121132137148175182215
L1(mm)
3538455263708080
100144168192
3838383745454848515353536565808390
L2(mm)
40485461799076
102105120140170
35404048486048566048566756677681
105
M(thread)
M5M6M8
M10M12M14M12M16M20M20M22M24M5M5M6
1/4"UNCM6M8
1/4"UNC5/16"UNC
M81/4"UNC
5/16"UNC3/8"UNC
5/16"UNC3/8"UNC
M161/2"UNC5/8"UNC
OD(mm)
5.56.37.59.1
12.514.316.116.117.821.425.028.1
6.36.36.36.37.57.57.57.59.19.19.19.1
12.512.516.116.117.8
6780-10326780-10336780-10346780-10356780-10366780-11896780-18126780-10376780-18136780-18146780-18152780-19946780-11116780-11606780-11076780-11616780-11086780-11096780-11626780-11636780-11106780-12586780-11646780-11656780-12656780-11666780-11336780-11686780-1169
SIZE(mm/inch)
2.5*M53.0*M64.0*M8
5.0*M106.0*M127.0*M148.0*M128.0*M1610*M2012*M2014*M2216*M241/8"*M51/8"*M51/8"*M6
1/8"*1/4"UNC5/32"*M65/32"*M8
5/32"*1/4"UNC5/32"*5/16"UNC
3/16"*M83/16"*1/4"UNC
3/16"*5/16"UNC3/16"*3/8"UNC1/4"*5/16"UNC1/4"*3/8"UNC
5/16"*M165/16"*1/2"UNC3/8"*5/8"UNC
Dia Ø Cable(mm)
2.53.04.05.06.07.08.08.0
10.012.014.016.01/8"1/8"1/8"1/8"
5/32"5/32"5/32"5/32"3/16"3/16"3/16"3/16"1/4"1/4"
5/16"5/16"3/8"
M
L2L
L1
Technical DataForging material : AISI316 - DIN 1.4401Production : SF7801L - Stud - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationLeft threaded stud terminals are designed for loose wire rope ends. Terminals must be properly swaged with swaging machine.
ODSF7801LLeft threaded stud terminal
SF7801Right threaded stud terminal
2,0001,000
750300150150150100
6050
n/a25
1,5001,5001,4001,200
750750
1,200900500600600500175300
80150
90
SF7801L PBC
2233
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
item no.
Material SF7801
SS316
L(mm)
86868097
110115128128162168178175190214225225278284328387
809097
L1(mm)
3235323845455152637070808080
100100144144168192
323737
L2(mm)
40404048485457617980907690
102105105116120140170
404148
M(thread)
M5M5M5M6M6M8M8
M10M12M12M14M12M14M16M16M20M20M20M22M24 M5M5M6
OD(mm)
5.55.56.36.37.57.59.19.1
12.514.314.316.116.116.117.817.821.421.425.028.1
5.56.36.3
6780-12686780-10126780-10686780-10206780-10506780-10216780-10956780-10266780-10282780-11706780-10296780-10562780-11716780-10306780-18166780-10146780-15666780-18186780-18192780-19936780-11046780-11886780-1155
SIZE(mm/inch)
2*M52.5*M5
3*M53*M64*M64*M85*M8
5*M106*M127*M127*M148*M128*M148*M16
10*M2010*M2012*M2012*M2014*M2216*M24
3/32"*M51/8"*M51/8"*M6
Dia Ø Cable(mm)
22.5334455677888
101012121416
3/32"1/8"1/8"
2,5002,0001,4001,200
750750450300150150150150100100
756050502525
2,5001,5001,400
PBC
n/a1
n/a2
n/a3
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
swaged with swaging machine.
Threaded stud terminal
Technical DataForging material : AISI316 - DIN 1.4401Production : SF7801 - Stud - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationRight threaded stud terminals are designed for loose wire rope ends. Terminals must be properly swaged with swaging machine.
SF7801Standard
Note:(1) See Note : D14
(1)
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC62
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
SF7801Right threaded stud terminal
(Continue from previous page)
g
(Continue from previous page)
Note D14 :
Non Standard(1)
Standard (1)
"Standard terminals are the comon sizes used in assembly with other products such as turnbuckles."
"Non-standard terminals are sizes which are rarely used in common settings or product assemblies."
item no.
Material SF7801
SS316
L(mm)
108116132148162182
L1(mm)
484853656583
L2(mm)
485667678181
M(thread)
M6M8
M10M10M12M12
OD(mm)
7.57.59.1
12.512.516.1
6780-11446780-11526780-11536780-11546780-11806780-1219
SIZE(inch)
5/32"*M65/32"*M8
3/16"*M101/4"*M101/4"*M12
5/16"*M12
Dia Ø Cable(inch)
5/32"5/32"3/16"1/4"1/4"
5/16"
750750300180170150
item no.
Material SF7801
SS316
L(mm)
728385908695
117115118122120135145162155162178387465
70708697859090
100859097
100106108115118108108116116124127113116121128132137157162182182137148153157162187175182
L1(mm)
2132323735404545455157636464636470
192240
323235373838383835383738454545454548485151515351535753
57.5646464646565636465648083
L2(mm)
4040424141445757575852636380808081
170180
303040483540405040404850485057605048565260634852566067678085
105105
5667808081
1107681
M(thread)
M5M6M6M5M6M6M6M8M8M8M8
M10M10M10M12M12M12M24M27M6
3/16"3/16"
1/4"UNCM5M5M6M6
3/16"3/16"
1/4"UNC1/4""M6M8M8M8
1/4"UNC1/4"UNC
5/16"UNCM8M8
M101/4"UNC
5/16"5/16"UNC
5/16"3/8"UNC3/8"UNC
M10M10M10M12
5/16"UNC3/8"UNC
3/8"3/8"
1/2"UNC1/2"M16
1/2"UNC
OD(mm)
5.55.55.56.36.37.57.57.57.59.19.1
12.512.512.512.512.514.328.134.5
5.55.55.55.56.36.36.36.36.36.36.36.37.57.57.57.57.57.57.59.19.19.19.19.19.19.19.1
10.812.512.512.512.512.512.512.512.512.512.516.116.1
6780-10606780-10476780-10896780-12856780-10016780-10696780-10616780-10766780-11816780-11256780-10706780-10716780-10546780-11346780-10526780-11726780-10556780-12116780-12706780-10196780-10646780-11126780-11136780-10086780-10736780-10076780-11796780-11936780-10676780-11146780-10096780-10236780-10246780-15326780-11776780-10256780-11156780-11166780-11356780-10176780-11026780-11596780-10656780-11176780-11986780-11186780-11576780-11366780-14166780-10036780-10046780-12646780-11196780-12016780-12066780-11586780-10056780-11246780-1121
SIZE(mm/inch)
2*M52*M6
2.5*M63*M53*M64*M64*M64*M84*M85*M85*M8
6*M106*M106*M106*M126*M127*M12
16*M2420*M27
3/32"*M63/32"*3/16"3/32"*3/16"
3/32"*1/4"UNC1/8"*M51/8"*M51/8"*M61/8"*M6
1/8"*3/16"1/8"*3/16"
1/8"*1/4"UNC1/8"*1/4""5/32"*M65/32"*M85/32"*M85/32"*M8
5/32"*1/4"UNC5/32"*1/4"UNC
5/32"*5/16"UNC3/16"*M83/16"*M8
3/16"*M103/16"*1/4"UNC
3/16"*5/16"3/16"*5/16"UNC
3/16"*5/16"3/16"*3/8"UNC7/32"*3/8"UNC
1/4"*M101/4"*M101/4"*M101/4"*M12
1/4"*5/16"UNC1/4"*3/8"UNC
1/4"*3/8"1/4"*3/8"
1/4"*1/2"UNC1/4"*1/2"
5/16"*M165/16"*1/2"UNC
Dia Ø Cable(mm/inch)
2.02.02.53.03.04.04.04.04.05.05.06.06.06.06.06.07.0
16.020.0
3/32"3/32"3/32"3/32"1/8"1/8"1/8"1/8"1/8"1/8"1/8"1/8"
5/32"5/32"5/32"5/32"5/32"5/32"5/32"3/16"3/16"3/16"3/16"3/16"3/16"3/16"3/16"7/32"1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"
5/16"5/16"
2,5001,4001,4001,4001,200
750750750500400500250250150170150150
25n/a
2,0001,5002,5002,5001,5001,5001,4001,4001,4001,4001,2001,200
750750750750
1,0001,200
900700600300600450600450500300180200180175180300n/a250170200
80150
* For more information on symbols, refer to page XVI.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
63
Terminals & Turnbuckles
item no.
Material SF7805/CH
SS316
B(mm)
242730303336394245485256
L(mm)
313352413425462504546588630672714756
L1(mm)
75859595
105115125135145155165175
Dia Ø Cable(mm)
141619202224262830323436
B.L.(1)
(kgs)
18,50024,00029,00029,00036,00042,00051,00058,00068,00077,00092,000
106,000
2780-53142780-53162780-53192780-53202780-53222780-53242780-53262780-53282780-53302780-53322780-53342780-5336
SIZE(mm)
141619202224262830323436
ØA(mm)
242730303336394245485256
item no.
Material S3121/5CH
SS316
B(mm)
242730303336394245485256
Ø D(mm)
45.050.854.054.057.063.570.073.080.085.089.192.0
L1(mm)
75859595
105115125135145155165175
Dia Ø Cable(mm)
141619202224262830323436
B.L.(1)
(kgs)
18,50024,00029,00029,00036,00042,00051,00058,00068,00077,00092,000
106,000
6312-16096312-16106312-16116312-16126312-16136312-16146312-16156312-16216312-16176312-16186312-16196312-1620
SIZE(mm)
14*M2416*M2719*M3020*M3022*M3324*M3626*M3928*M4230*M4532*M4834*M5236*M56
ØA(mm)
242730303336394245485256
L
B
A
L1
DB
A
L1
SF7805/CH
S3121/5CH
S3121/5CHTurnbuckle toggle (countersunk head pin) &Swage terminal
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S3121/5CH - Turebuckle - Pipe / Bar Toggle - Sheet Terminal - Bar Eye - Bar Pin - Bar Surface treatment : "M.F. " (Matte finished)
Field of applicationTurnbuckle toggles & Swage terminals are heavy duty class turnbuckles of the Sinox basic range. They provide a solid tensioning platform for cables from 14mm to 36mm with build in 4 times cable size adjustment.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
SF7805/CHSwage toggle (countersunk head pin)
Technical DataForging material : AISI316 - DIN 1.4401Production : SF7805/CH - Toggle - Sheet Terminal - Bar Pin - Bar Surface treatment : "M.F. " (Matte finished)
Field of applicationSwage toggles provide the flexibility of a toggle connection with the full swage strength of swagedterminal. Swage toggles are designed to be used where no adjustment are needed.
L (Full in)
L
690785910922
1,0361,1261,2141,2961,3911,4791,5811,674
578657758770860934
1,0061,0721,1511,2231,3091,386
- +in out
* For more information on symbols, refer to page XVI.64
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF312PBD
SS316
L(mm)
8090
105125150165190210210270250
90105125150190210
M(thread)
M5M6M8
M10M12M14M16M20M20M22M24
1/4''UNC5/16"UNC3/8"UNC1/2"UNC5/8"UNC3/4"UNC
6312-09056312-09066312-09086312-09106312-09126312-09146312-09166312-09202312-09252312-09226312-09286312-91046312-91656312-09836312-92016312-09856312-9403
SIZE(mm/inch)
M5M6M8
M10M12M14M16M20
M20*3.5M22*4
M241/4"UNC
5/16"UNC3/8"UNC1/2"UNC5/8"UNC3/4"UNC
B.L.(1)
(kgs)
7501,4002,4003,4505,0006,5008,500
13,00012,80015,90021,000
1,4002,4003,4505,0008,500
13,000
1,500600500250150100
8040
n/an/a10
600400250150
7040
item no.
Material SF312PBD/MIN
SS316
L(mm)
4050606080
M(thread)
M4M5M6M8
M10
6312-30046312-30056312-30066312-30086312-3010
SIZE(mm)
4568
10
B.L.(1)
(kgs)
360750
1,2502,2003,400
3,5003,000
8001,000
400
item no.
Material SF312PLBD/MIN
SS316
L(mm)
80100120120160
M(thread)
M4M5M6M8
M10
6312-35046312-35056312-35066312-35086312-3810
SIZE(mm)
4568
10
B.L.(1)
(kgs)
360750
1,2502,2003,400
1,500800500300150
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PBD - Pipe - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationTurnbuckle pipes are designed for tightening of two mechanical threaded ends. Fittings can be separately ordered, but dimension of thread must be carefully observed.
M
L
SF312PBDTurnbuckle pipe
SF312PBD/MINMini turnbuckle pipe
SF312PLBD/MINLong mini turnbuckle pipe
SF312PBD
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PBD/MIN - Pipe - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationMini turnbuckle pipes are designed for tightening of two mechanical threaded ends with minimum space available. Fittings can be separately ordered, but dimension of thread and length of thread must be carefully observed.
SF312PBD/MIN
Technical DataForging material : AISI316 - DIN 1.4401Production : SF312PLBD/MIN - Pipe - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationLong mini turnbuckle pipes are designed for tightening of two mechanical threaded ends withextra slim profile. Fittings can be separately ordered, but dimension of thread and length of thread must be carefully observed.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 7 load characteristics
SF312PLBD/MIN
160 M100 10 3,400150
Note: Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 7 load characteristics
* For more information on symbols, refer to page XVI.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
65
Terminals & Turnbuckles
Technical DataForging material : AISI316 - DIN 1.4401Production : SF7802 - Eye - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationEye terminals are designed for swaging of a loose end wire rope. Wire must be properly swaged by using a swaging machine.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 4 load characteristics
D
L
M
Technical DataForging material : AISI316 - DIN 1.4401Production : SF78021N/L - Eye - Forged : SF78021N/R - Eye - ForgedSurface treatment : "M.F. " (Matte finished)
Field of applicationThreaded eyes and nuts are designed to assembly with the turnbuckles or the other fittings.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
C
L
M
C C
SF7802Eye terminal
SF78021/LLeft threaded eyeSF78021/RRight threaded eye
SF78021N/LLeft threaded eye and nutSF78021N/RRight threaded eye and nut
SF7802
Field of applicationThreaded eyes are designed for assembly with the turnbuckles or the other fittings together. Selection of left hand or right hand thread must be carefully checked.
Technical DataForging material : AISI316 - DIN 1.4401Production : SF78021/L - Eye - Forged : SF78021/R - Eye - ForgedSurface treatment : "E.P." (Electro polished)
SF78021/L, SF78021/R
SF78021N/L, SF78021N/R
Note:(1) Standard safety factor for working load is 1/4 of breaking load.
Refer to page IV - class 4 load characteristics
SF78021/L, SF78021/R
Eye terminal
item no.
Material SF7802
SS316
Ø C(mm)
5.55.56.58.5
10.513.014.516.319.3
5.56.58.5
10.513.014.516.319.3
Ø D(mm)
5.535.536.357.549.12
12.5416.1317.8521.44
5.536.357.549.12
12.5416.1317.8521.44
L(mm)
56.056.062.077.087.0
107.5133.0159.5180.0
56.062.077.087.0
107.5133.0159.5180.0
Dia Ø Cable(mm)
2.02.53.04.05.06.08.0
10.012.0
3/32"1/8"
5/32"3/16"1/4"
5/16"3/8"1/2"
6780-22026780-22256780-22036780-22046780-22056780-23066780-22086780-22106780-22126780-27336780-27186780-27536780-27316780-27146780-25616780-23816780-2712
SIZE(mm/inch)
2.02.53.04.05.06.08.0
10.012.0
3/32"1/8"
5/32"3/16"1/4"
5/16"3/8"1/2"
B.L.(1)
(kgs)
850850
1,0001,3502,5004,5006,7007,8009,000
8501,0001,3502,5004,5006,7007,8009,000
2,5002,5002,0001,200
500300125100
702,5002,000
800500300125100
70
22223
n/an/an/an/an/an/an/an/an/an/an/an/a
PBC
item no.
Material SF78021/L
SS316
Ø C(mm)
5.56.58.5
10.813.013.014.519.5
L(mm)
68.068.086.5
102.0122.5138.0148.5185.0
M(thread)
M5M6M8
M10M12M14M16M20
6780-22566780-2266 6780-22886780-2201 6780-22216780-2214 6780-22166780-2220
SIZE(mm)
M5 M6 M8 M10M12M14M16M20
B.L.(1)
(kgs)
7501,0002,2003,0005,0006,1008,000
11,000
1,2001,500
500400250200150
70
1233
n/an/an/an/a
PBC
FFFFFFFFFFFFFFFFF
FFFFFFFF
item no.
Material SF78021/R
SS316
Ø C(mm)
5.56.58.5
10.813.013.014.519.5
L(mm)
68.068.086.5
102.0122.5138.0148.5185.0
M(thread)
M5M6M8
M10M12M14M16M20
6780-2156 6780-2166 6780-21886780-2110 6780-2112 6780-2114 6780-2116 6780-2120
SIZE(mm)
M5 M6 M8 M10M12M14M16M20
B.L.(2)
(kgs)
7501,0002,2003,0005,0006,1008,000
11,000
1,2001,500
500400250200150
70
1233
n/an/an/an/a
PBC
FFFFFFFF
item no.
Material SF78021N/L
SS316
Ø C(mm)
5.56.58.5
10.813.013.014.519.5
L(mm)
68.068.086.5
102.0122.5138.0148.5185.0
M(thread)
M5M6M8
M10M12M14M16M20
6780-21576780-21616780-21816780-21116782-10126782-10146782-10166782-1020
SIZE(mm)
M5 M6 M8 M10M12M14M16M20
B.L.(2)
(kgs)
7501,0002,2003,0005,0006,1008,000
11,000
n/a1,500
900500n/an/an/an/a
FFFFFFFF
item no.
Material SF78021N/R
SS316
Ø C(mm)
5.56.58.5
10.813.013.014.519.5
L(mm)
68.068.086.5
102.0122.5138.0148.5185.0
M(thread)
M5M6M8
M10M12M14M16M20
6780-2150 6780-2160 6780-21086780-21016780-21216782-11146782-11166782-1120
SIZE(mm)
M5 M6 M8 M10M12M14M16M20
B.L.(2)
(kgs)
7501,0002,2003,0005,0006,1008,000
11,000
2,5001,500
900450300n/an/an/a
FFFFFFFF
* For more information on symbols, refer to page XVI.Piece per carton. Plastic Back Card. PBC
UpsetForgingF66
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Field of applicationLeft threaded eyes and right threaded eyes are designed to be used primarily with turnbuckles.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301 AISI316 - DIN 1.4301Surface treatment : "E.P." (Electro polished)
CC
L
L1L1
M
BF311EL (Left threaded eye )BF311ER (Right threaded eye )
BF311EL, BF311ERitem no.
Material BF311EL
SS316SS304
C(mm)
8.58.5
10.012.014.017.020.022.028.010.012.014.017.020.022.028.020.0
L(mm)
52.048.062.077.0
105.0128.5160.0202.5232.0
62.077.0
105.0128.5160.0202.5232.0160.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
2931-10412931-14512311-55032311-55022931-11822311-55092311-55122311-55162311-20012311-31612311-41022311-51222311-55382311-22132311-57592311-55332311-2113
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16" 3/8" 1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
475680680
1,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,5004,500
1931-10411931-14511311-55041311-55061931-11811311-55091311-55121311-55161311-20011311-31611311-41021311-51221311-55381311-22131311-57581311-55341311-2113
item no.
Material BF311ER
SS316SS304
C(mm)
8.58.5
10.012.014.017.020.022.028.010.012.014.017.020.022.028.020.0
L(mm)
52.048.062.077.0
105.0128.5160.0202.5232.0
62.077.0
105.0128.5160.0202.5232.0160.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
2931-10402931-14502931-12062311-56082931-12092311-56012311-56112311-56152311-20112311-31622311-41132311-51132311-56382311-22142311-56592311-56332311-2114
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16" 3/8" 1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
475680680
1,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,5004,500
1931-10401931-14501931-12051311-56061931-12081311-56091311-56121311-56161311-20111311-31621311-41121311-51121311-56381311-22141311-56581311-56341311-2114
* For more information on symbols, refer to page 17.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
67
Terminals & Turnbuckles
item no.
Material BF311NEL
SS316SS304
C(mm)
8.58.5
10.012.014.017.020.022.028.010.012.014.017.020.022.028.020.0
L(mm)
52.048.062.077.0
105.0128.5160.0202.5232.0
62.077.0
105.0128.5160.0202.5232.0160.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
2311-55432311-54452311-55552311-55592311-55542311-54102311-54122311-54162311-54202311-54362311-54142311-54562311-54382311-54112311-54582311-54342311-5413
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
475680680
1,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,5004,500
1311-55431311-54451311-55571311-55561311-55581311-54101311-54121311-54161311-54201311-54361311-54141311-54561311-54381311-54111311-54581311-54341311-5413
item no.
Material BF311NER
SS316SS304
C(mm)
8.58.5
10.012.014.017.020.022.028.010.012.014.017.020.022.028.020.0
L(mm)
52.048.062.077.0
105.0128.5160.0202.5232.0
62.077.0
105.0128.5160.0202.5232.0160.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
2931-12032311-55452931-12022311-55012311-59082311-55132311-55142311-55182311-55212311-53362311-53142311-53562311-53382311-53112311-53582311-53342311-5313
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16" 3/8" 1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
475680680
1,5002,3003,1004,4008,100
11,000650
1,3002,1002,5004,5006,700
10,5004,500
1931-12401311-55451311-55051311-55071311-55081311-55111311-55141311-55181311-55211311-53361311-53141311-53561311-53381311-53111311-53581311-53341311-5313
Field of applicationLeft threaded eyes and nuts and right threaded eyes and nuts are designed to be assembled with turnbuckles.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
Technical DataForging material : AISI304 - DIN 1.4308 AISI316 - DIN 1.4401Surface treatment : "E.P." (Electro polished)
C
L
M
BF311NEL (Left threaded eye and nut)BF311NER (Right threaded eye and nut)
L1
BF311NEL, BF311NER
22.028.020.0
202.5232.0160.0
137.5147.0110.0
5/83/4"
1/2"UNC
2311 53582311-53342311-5313
5/83/4"
1/2"UNC
6,70010,500
4,500
1311 53581311-53341311-5313
* For more information on symbols, refer to page 17.68
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material BF311HL
SS316SS304
L(mm)
50.548.062.083.0
104.5131.5165.0202.5222.0
62.083.0
104.5131.5165.0202.5222.0165.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
O(mm)
5.56.35.56.58.0
11.214.017.022.0
5.56.58.0
11.214.017.022.014.0
2931-10442931-14542931-12152931-12162311-57082311-57092311-57122311-57162311-20122311-31632931-11032931-15262311-57382311-22152311-58012311-34012311-2117
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
100130130350650800
1,4002,4003,500
130350650800
1,4002,4003,5001,400
1931-10441931-14541931-12151931-12161311-57081311-57091311-57121311-57161311-20121311-31631931-11041931-15271311-57381311-22151311-58011311-34011311-2115
item no.
Material BF311HR
SS316SS304
L(mm)
50.548.062.083.0
104.5131.5165.0202.5222.0
62.083.0
104.5131.5165.0202.5222.0165.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
O(mm)
5.56.35.56.58.0
11.214.017.022.0
5.56.58.0
11.214.017.022.014.0
2931-10432931-14532931-12242931-12272311-58052311-58092311-58122311-58162311-20132311-31642931-12012931-15062311-58382311-22162311-58022311-34022311-2116
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16" 3/8" 1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
100130130350650800
1,4002,4003,500
130350650800
1,4002,4003,5001,400
1931-10431931-14531931-12251931-12261311-58081311-58091311-58121311-58161311-20131311-31641931-12011931-15071311-58381311-22161311-58021311-34021311-2116
O
L M
Technical DataForging material : AISI304 - DIN 1.4301 AISI316 - DIN 1.4301Surface treatment : "E.P." (Electro polished)
Field of applicationLeft threaded hooks and Right threaded hooks are designed to be used primarily with turnbuckles.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV class 8 load characteristics
BF311HL (Left threaded hook)BF311HR (Right threaded hook)
L1
BF311HL, BF311HR
202.5222.0165.0
137.5147.0110.0
5/8"3/4"
1/2"UNC
17.022.014.0
2311-58022311-34022311-2116
5/8"3/4"
1/2"UNC
2,4003,5001,400
1311-58021311-34021311-2116
* For more information on symbols, refer to page 17.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
69
Terminals & Turnbuckles
item no.
Material BF311N/HL
SS316SS304
L(mm)
50.548.062.083.0
104.5131.5165.0202.5222.0
62.083.0
104.5131.5165.0202.5222.0165.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
O(mm)
5.56.35.56.58.0
11.214.017.022.0
5.56.58.0
11.214.017.022.014.0
2311-56412311-56462311-56562311-56652311-57042311-56102311-56132311-56172311-56202311-13172311-15132311-15152311-55372311-12112311-56572311-55352311-5103
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
100130130350650800
1,4002,4003,500
130350650800
1,4002,4003,5001,400
1311-56411311-56461311-56551311-56651311-56041311-56101311-56131311-56171311-56201311-13171311-15131311-15151311-55371311-12111311-56571311-55351311-5103
item no.
Material BF311N/HR
SS316SS304
L(mm)
50.548.062.083.0
104.5131.5165.0202.5222.0
83.083.0
104.5131.5165.0202.5222.0165.0
L1(mm)
33.527.039.050.066.583.5
110.0137.5147.0
39.050.066.583.5
110.0137.5147.0110.0
M(thread)
M4M5M5M6M8
M10M12M16M203/16"1/4"
5/16"3/8"1/2"5/8"3/4"
1/2"UNC
O(mm)
5.56.35.56.58.0
11.214.017.022.0
5.56.58.0
11.214.017.022.014.0
2311-56402311-56452311-56032311-56022311-15042311-15102311-15122311-15172311-15202311-13162311-15142311-15162311-15382311-12122311-15582311-15342311-5102
SIZE(mm/inch)
M4.0M4.5M5.0M6.0M8.0
M10.0M12.0M16.0M20.03/16"1/4"
5/16" 3/8" 1/2"5/8"3/4"
1/2"UNC
B.L.(1)
(kgs)
100130130350650800
1,4002,4003,500
130350650800
1,4002,4003,5001,400
1311-56401311-56451311-56051311-56071311-15031311-15101311-15121311-15171311-15201311-13161311-15141311-15161311-15381311-12121311-15581311-15341311-5102
BF311N/HL (Left threaded hook and nut)BF311N/HR (Right threaded hook and nut)
O
L M
Technical DataForging material : AISI304 - DIN 1.4301 AISI316 - DIN 1.4401Surface treatment : "E.P." (Electro polished)
Field of applicationLeft threaded hooks and nuts and right threaded hooks and nuts are designed to be assembled with turnbuckles.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV class 8 load characteristics
L1
BF311N/HL, BF311N/HR
202.5222.0165.0
137.5147.0110.0
5/8"3/4"
1/2"UNC
17.022.014.0
2311-15582311-15342311-5102
5/8"3/4"
1/2"UNC
2,4003,5001,400
1311-15581311-15341311-5102
* For more information on symbols, refer to page 17.70
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF7803
SS316
Ø A(mm)
5.005.006.008.009.00
12.0012.0014.2816.0019.0025.0025.00
5.006.008.009.009.00
12.0014.2816.00
B(mm)
7.07.08.0
11.012.014.514.515.017.020.030.030.0
7.08.0
11.012.012.014.515.017.0
Ø D(mm)
5.535.536.357.549.12
12.5414.3016.1317.8521.4425.0028.17
5.536.357.549.12
10.8412.5416.1317.85
DiaØCable(mm)
2.02.53.04.05.06.07.08.0
10.012.014.016.0
3/32"1/8"
5/32"3/16"7/32"1/4"
5/16"3/8"
Ø F(mm)
2.202.703.304.305.306.357.308.40
10.5012.5014.9017.10
2.703.504.305.105.906.708.409.90
L(mm)
53.562.068.077.087.0
109.0116.0148.0164.0215.0285.0313.0
62.068.077.087.093.0
109.0148.0154.0
L1(mm)
3235384551647080
100144168192
3538455157648090
Accessory
RingRingRingRingRingRingRing
Cotter pinCotter pinCotter pinCotter pinCotter pin
RingRingRingRingRingRing
Cotter pinCotter pin
6780-30026780-30256780-30036780-30046780-30056780-30066780-30076780-30086780-30106780-30126780-31146780-31166780-33326780-37186780-35326780-33166780-37326780-37146780-3615
6780-3318
SIZE(mm/inch)
2.02.53.04.05.06.07.08.0
10.012.014.016.0
3/32"1/8"
5/32"3/16"7/32"1/4"
5/16"3/8"
B.L.(1)
(kgs)
700700
1,2501,8002,6504,0005,80065009000
11,00013,00018,000
7001,2501,8002,6503,0004,0007,2508,400
A
L
L1
M
Field of applicationLeft threaded fork and Right threaded forks are designed for assembly with the turnbuckles or the other fittings together. Selection of left hand or right hand thread must be carefully checked.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 9 load characteristics
BF312P/JLLeft threaded fork
BF312P/JRRight threaded fork
SF7803Swage fork
L
L1
F
D
B
L
L1
F
A
L
L1
M
BB
AAB
67676767676767676767676767
67Swage fork
Technical DataForging material : AISI316 - DIN 1.4401Production : SF7803 - Jaw - Cast Pin - Forged Accessory - See chartSurface treatment : "E.P." (Electro polished)
Field of applicationSwage forks are designed for swaging of a loose endwire rope. Wire must be properly swaged by using a swaging machine.
SF7803
Technical DataForging material : AISI316 - DIN 1.4401Production : BF312P/JL - Jaw - Cast Pin - Forged Accessory - See chart BF312P/JR - Shackle - Cast Pin - Forged Accessory - See chartSurface treatment : "E.P." (Electro polished)
BF312P/JL, BF312P/JR
1,5001,5001,000
500250150150
7050401010
1,5001,000
500250150150
7050
12333
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
PBC
item no.
Material BF312P/JL
SS316
Ø A(mm)
5689
121416192525
B(mm)
7.08.0
11.012.014.515.017.020.030.030.0
L(mm)
56.5068.5080.0098.50
121.25136.00143.00160.00217.50215.50
L1(mm)
395057688295
102113146144
M(thread)
M5M6M8
M10M12M14M16M20M22M24
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pinCotter pinCotter pin
6312-33186931-22066931-22566312-33196312-06126931-26146312-06176312-06186312-06236312-0625
SIZE(mm/inch)
M5M6M8
M10M12M14M16M20M22M24
B.L.(2)
(kgs)
2501,4002,2003,4505,0006,4008,000
10,50015,00018,000
1,000500400300180100
5040
n/a25
1233
n/an/an/an/an/an/a
PBC
item no.
Material BF312P/JR
SS316
Ø A(mm)
5689
1214161925
B(mm)
7.08.0
11.012.014.515.017.020.030.0
L(mm)
56.5068.5080.0098.50
121.25136.00143.00160.00215.50
L1(mm)
395057688295
102113144
M(thread)
M5M6M8
M10M12M14M16M20M24
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pinCotter pin
6931-23366931-23066931-22086931-22106312-60126931-22146312-06196312-06206312-0629
SIZE(mm/inch)
M5M6M8
M10M12M14M16M20M24
B.L.(2)
(kgs)
2501,4002,2003,4505,0006,4008,000
10,50018,000
1,000500400300180100
503025
1233
n/an/an/an/an/a
PBC
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
71
Terminals & Turnbuckles
Technical DataForging material : AISI316 - DIN 1.4401Production : S7805 - Terminal - Cast Toggle - Forged Accessory - See chart SF7805 - Terminal/Toggle - Forged Accessory - E-Ring Surface treatment : "E.P." (Electro polished)
Field of applicationSwage toggles are designed for swaging of a loose end wire rope. Wire must be properly swaged by using a swaging machine.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
Technical DataForging material : AISI316 - DIN 1.4401Production : B3125/L - Toggle - Forged Accessory - See chart B3125/R - Toggle - Forged Accessory - See chartSurface treatment : "E.P." (Electro polished)
Field of applicationThreaded toggles are designed for assembly with the turnbuckles or other fittings together. Selection of left hand or right hand thread must be carefully checked.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 9 load characteristics
B3125/RRight threaded toggle
B3125/LLeft threaded toggle
SF7805Swage toggle
S7805, SF7805
B3125/L, B3125/R
S7805Swage toggle
L1
L
M
B
L1
M A
A
L
F
D
BA
L
F
D L
FF
D
A
BB
FFFFFFFFFF
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
FFFFFFFFFF
Swage Toggle
item no.
Material S7805
SS316
Ø A(mm)
55689
1216195689
121619
B(mm)
667
101213172067
1012131720
Ø D(mm)
5.535.536.357.549.12
12.5416.1317.85
5.536.357.549.12
12.5416.1317.85
Dia Ø Cable(mm)
2.02.53.04.05.06.08.0
10.03/32"1/8"
5/32"3/16"1/4"
5/16"3/8"
Ø F(mm)
2.202.703.304.305.306.358.40
10.502.703.504.305.106.708.409.90
L(mm)
2.202.703.304.305.306.358.40
10.502.703.504.305.106.708.409.90
Accessory
RingRingRingRingRingRing
Cotter pinCotter pin
RingRingRingRing
Cotter pinCotter pinCotter pin
6780-50026780-50256780-50036780-50046780-50056780-50066780-50086780-50106780-53326780-51086780-55326780-53166780-51046780-55166780-5308
SIZE(mm/inch)
2.02.53.04.05.06.08.0
10.03/32"1/8"
5/32"3/16"1/4"
5/16"3/8"
B.L.(1)
(kgs)
400400670
1,4001,7004,0007,0007,500
400670
1,4001,7004,0007,0007,500
1,2001,200
700400200150
5040
1,200700400200150
5025
12233
n/an/an/an/an/an/an/an/an/an/a
PBC
item no.
Material SF7805
SS316
Ø A(mm)
68
1012121416192225
B(mm)
6.49.0
11.013.013.013.018.022.024.028.0
Ø D(mm)
6.307.509.08
12.5014.2516.0817.8021.4024.9528.10
Dia Ø Cable(mm)
345678
10121416
Ø F(mm)
3.34.35.36.37.48.4
10.512.514.917.1
L(mm)
3.304.305.306.307.408.40
10.5012.5014.9017.10
2780-50032780-50042780-50052780-50062780-50072780-50082780-50102780-50122780-50142780-5016
SIZE(mm)
345678
10121416
B.L.(1)
(kgs)
1,2002,0003,0004,5006,0007,5008,500
11,50018,00020,000
600300200
60505040251510
12233
n/an/an/an/an/a
PBC
item no.
Material B3125/L
SS316
Ø A(mm)
5.006.008.009.00
12.0014.2816.0019.00
B(mm)
67
101213151720
L(mm)
637288
106125142162186
L1(mm)
424856678189
103115
M(mm)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6312-50556312-50666931-25806931-25016931-25216931-25416931-2561 6931-2502
SIZE(mm)
M5M6M8
M10M12M14M16M20
B.L.(2)
(kgs)
500900
1,6502,5003,7005,0006,950
10,000
1,000350350180
60504530
1233
n/an/an/an/a
PBC
item no.
Material B3125/R
SS316
Ø A(mm)
5.006.008.009.00
12.0014.2816.0019.00
B(mm)
67
101213151720
L(mm)
637288
106125142162186
L1(mm)
424856678189
103115
M(mm)
M5M6M8
M10M12M14M16M20
Accessory
RingRingRingRingRing
Cotter pinCotter pinCotter pin
6312-50556312-50666931-25806931-25016931-25216931-25416931-2561 6931-2502
SIZE(mm)
M5M6M8
M10M12M14M16M20
B.L.(2)
(kgs)
500900
1,6502,5003,7005,0006,950
10,000
1,000350350180
60504530
1233
n/an/an/an/a
PBC
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
UpsetForgingF72
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S811
SS316
Ø C(mm)
6.008.00
10.0012.7516.0016.00
Ø F(mm)
3.54.56.07.09.0
11.0
L(mm)
64719198
121152
Dia Ø Cable(mm)
34568
10
6811-00036811-00046811-00056811-00066811-0008 6811-0010
SIZE(mm)
34568
10
B.L.(1)
(kgs)
300500900
1,9002,2503,300
600250200135
7540
223
n/an/an/a
PBC
item no.
Material S811M
SS316
Ø C(mm)
5.55.56.56.58.58.5
10.510.512.512.514.514.5
Ø F(mm)
3.43.44.44.45.45.46.46.48.58.5
10.510.5
L(mm)
47.747.755.155.164.664.682.782.7
100.7100.7117.8117.8
Dia Ø Cable(mm)
3344556688
1010
Cableconstruction
1x197x7
1x197x7
1x197x7
1x197x7
1x197x7
1x197x7
6811-03196811-03776811-04196811-04776811-0519 6811-05776811-06196811-06776811-08196811-08776811-1019 6811-1077
SIZE(mm)
3344556688
1010
B.L.(1)
(kgs)
300300500500900900
1,9001,9002,2502,2503,3003,300
223
n/an/an/an/an/an/an/an/an/a
PBC
item no.
Material S812
SS316
B(mm)
68
10111414
Ø A(mm)
568
101113
F(mm)
3.54.56.07.09.0
11.0
L(mm)
697698
106134166
Dia Ø Cable(mm)
34568
10
6812-00036812-00046812-00056812-00066812-00086812-0010
SIZE(mm)
34568
10
B.L.(2)
(kgs)
300500900
1,2002,2503,300
400250200100
6030
223
n/an/an/a
PBC
54321 6
F
C
C
L L
LL
B
B
F
AA
S812Fork swageless terminal
S811 Eye swageless terminal
S811, S812Technical DataCasting material : AISI316 - DIN 1.4408Production : S811 - Terminal - Cast S812 - Terminal - CastCable construction : 1x19Surface treatment : "M.F. " (Matte finished)
Field of applicationSwageless eye terminals are designed for easy assemblyof loose wire rope. No Swaging machine is neededduring assembly process. Once assembled it is not expected to sustain high loads.
4321 5Fork Lock nut Cap Cone End nut
Instructions for assembly of S812
S812MFork swageless terminal (Micro)
S811M Eye swageless terminal (Micro)
S811M, S812MTechnical DataCasting material : AISI316 - DIN 1.4408Production : S811M - Terminal - Cast S812M - Terminal - CastCable construction : See chartSurface treatment : "M.F. " (Matte finished)
Field of applicationMicro eye swageless terminals are designed for a new smaller profile from our original swageless system. This is available for both 7x7 configuration cable and 1x19 configuration cable.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 4 load characteristics
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 5 load characteristics
Instructions for assembly of S811
item no.
Material S812M
SS316
B(mm)
5566667788
1010
Ø A(mm)
4455667788
1010
F(mm)
3.43.44.44.45.45.46.46.48.58.5
10.510.5
L(mm)
47.347.354.754.764.364.382.382.3
100.4100.4117.2117.2
Dia Ø Cable(mm)
3344556688
1010
Cableconstruction
1x197x7
1x197x7
1x197x7
1x197x7
1x197x7
1x197x7
6812-10036812-70036812-10046812-70046812-10056812-70056812-10066812-70066812-10086812-70086812-10106812-7010
SIZE(mm)
3344556688
1010
B.L.(2)
(kgs)
225225375375675675900900
1,6901,6902,4752,475
223
n/an/an/an/an/an/an/an/an/a
PBC
FF
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
73
Terminals & Turnbuckles
item no.
Material S813
SS316
Ø F(mm)
3.54.56.07.09.0
11.0
L(mm)
8693
128132165212
Dia Ø Cable(mm)
34568
10
6813-00036813-00046813-00056813-00066813-00086813-0010
SIZE(mm)
3 4 5 6 810
B.L.(1)
(kgs)
300500900
1,9002,2503,300
400250200100
5030
item no.
Material S814
SS316
Ø F(mm)
3.54.56.07.09.0
11.0
L(mm)
120129172200242267
L1(mm)
606385
107126126
M(mm)
M6M8
M10M12M16M16
Dia Ø Cable(mm)
34568
10
6814-00036814-00046814-00056814-00066814-00086814-0010
SIZE(mm)
3 4 5 6 810
B.L.(2)
(kgs)
300500900
1,9002,2503,300
350200200100
5030
item no.
Material S814L
SS316
Ø F(mm)
3.54.56.07.09.0
11.0
L(mm)
120129172200242267
L1(mm)
606385
107126126
M(mm)
M6M8
M10M12M16M16
Dia Ø Cable(mm)
34568
10
6814-10036814-10046814-10056814-10066814-10086814-1010
SIZE(mm)
3 4 5 6 810
B.L.(2)
(kgs)
300500900
1,9002,2503,300
n/a200150100
5030
item no.
Material S814N
SS316
Ø F(mm)
3.54.56.07.09.0
11.0
L(mm)
120129172200242267
L1(mm)
606385
107126126
M(mm)
M6M8
M10M12M16M16
Dia Ø Cable(mm)
34568
10
6814-20036814-20046814-20056814-20066814-20086814-2010
SIZE(mm)
3 4 5 6 810
B.L.(2)
(kgs)
300500900
1,9002,2503,300
400250200100
5030
item no.
Material S814N/L
SS316
Ø F(mm)
3 4 5 6 810
L(mm)
120129172200242267
L1(mm)
606385
107126126
M(mm)
M6M8
M10M12M16M16
Dia Ø Cable(mm)
34568
10
6814-30036814-30046814-30056814-30066814-30086814-3010
SIZE(mm)
3 4 5 6 810
B.L.(2)
(kgs)
300500900
1,9002,2503,300
400250200100
5030
LL
6
LL1
M
F
F F
30
LL1
M
S814NRight threadedswageless stud with nut
S814N/LLeft threaded swageless stud with nut
1 Wire rope
2 End nut
3 Lock nut
4 Pipe
5 Cone
S814Right threaded swageless stud
S814LLeft threaded swageless stud
S813Swageless joiner
Technical DataCasting material : AISI316 - DIN 1.4408Production : S813 - Terminal - Cast S814 - Terminal - Cast S814L - Terminal - CastCable construction : 1x19Surface treatment : "M.F. " (Matte finished)
Field of applicationSwageless joiners and swageless studs are designed for easy assembly of loose wire rope. No Swaging machine is needed during assembly process. Once assembled it is not expected to sustain high loads.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 6 load characteristics
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 10 load characteristics
1. Always wear safety goggles and gloves when working with wire rope.
2. Never stand on, drive over or put things on wire rope.
L1
M
L1L
M
F
L
4
3
2
1
5
Instructions for assembly of S813
S813, S814, S814L
Technical DataCasting material : AISI316 - DIN 1.4408Production : S814N - Terminal - Cast S814N/L - Terminal - CastCable construction : 1x19Surface treatment : "M.F. " (Matte finished)
Field of applicationSwageless studs with nuts are used for wire ropewhere the use of a swaging machine is not necessary. They are assembled with a pair of spanners and can be taken off and reused.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 10 load characteristics
S814N, S814N/L
F
* For more information on symbols, refer to page 17.Piece per carton.74
Terminals & TurnbucklesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material LTSSS316
L(mm)
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
2610-10002810-10002101-10002122-10002162-10002202-10002242-10002104-10002506-10002318-10002124-10002102-10002102-2100
SIZE(mm/inch)
M6M8
M10M12M16M20M24
1/4"-20UNC5/16"-18UNC
3/8"-161/2"-12
1/2"-13UNC1/2"-20UNF
B.L.(1)
(kgs)
1,2002,2003,2005,0008,000
12,00019,000
1,2002,2003,0005,2005,2005,200
item no.
Material RTSSS316
L(mm)
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
2600-10002800-10002100-10002120-10002160-10002200-10002240-10002142-10002516-10002308-10002112-10002123-10002121-1000
SIZE(mm/inch)
M6M8
M10M12M16M20M24
1/4"-20UNC5/16"-18UNC
3/8"-161/2"-12
1/2"-13UNC1/2"-20UNF
B.L.(1)
(kgs)
1,2002,2003,2005,0008,000
12,00019,000
1,2002,2003,0005,2005,2005,200
Technical DataForging material : AISI316 - DIN 1.4401Surface treatment : "M.P." (Machine Polished)
Field of applicationLeft threaded studs and right threaded studs are designed for assembly with mechanical threaded end fittings. Threaded stud length can be cut and adjusted accordingly.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
LTS Left threaded studRTS Right threaded stud
L
LTS LefRTS R
L
LTS, RTS
1,0001,000
0000
1/2 -13UNC1/2"-20UNF
5,2005,200
bookstoreThreaded stud
* For more information on symbols, refer to page 17.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
75
Terminals & Turnbuckles
item no.
Material SF317
SS316
Ø D(mm)
33333334444455555555566666666667777778888888888888999999
L(mm)
10152025303540202530354020253035404550606525303540455055608090404550556065303540455055606570758090
100305060657080
6317-03106317-03156317-03206317-03256317-03306317-03356317-03406317-04206317-04256317-04306317-04356317-04406317-05206317-05256317-05306317-05356317-05406317-05456317-05506317-05606317-05656317-06256317-06306317-06356317-06406317-06456317-06506317-06556317-06606317-06806317-06906317-07406317-07456317-07506317-07556317-07606317-07656317-08306317-08356317-08406317-08456317-08506317-08556317-08606317-08656317-08706317-08756317-08806317-08906317-08106317-09306317-09506317-09606317-09656317-09706317-0980
SS304
4317-03104317-03154317-03204317-03254317-03304317-03354317-03404317-04204317-04254317-04304317-04354317-04404317-05204317-05254317-05304317-05354317-05404317-05454317-05504317-05604317-05654317-06254317-06304317-06354317-06404317-06454317-06504317-06554317-06604317-06804317-06904317-07404317-07454317-07504317-07554317-07604317-07654317-08304317-08354317-08404317-08454317-08504317-08554317-08604317-08654317-08704317-08754317-08804317-08904317-08104317-09304317-09504317-09604317-09654317-09704317-0980
SIZE(mm)
3*103*153*203*253*303*353*404*204*254*304*354*405*205*255*305*355*405*455*505*605*656*256*306*356*406*456*506*556*606*806*907*407*457*507*557*607*658*308*358*408*458*508*558*608*658*708*758*808*90
8*1009*309*509*609*659*709*80
B.L.(1)
(kgs)
650650650650650650650
1,0001,0001,0001,0001,0002,0002,0002,0002,0002,0002,0002,0002,0002,0002,7002,7002,7002,7002,7002,7002,7002,7002,7002,7003,2003,2003,2003,2003,2003,2005,0005,0005,0005,0005,0005,0005,0005,0005,0005,0005,0005,0005,0006,2006,2006,2006,2006,2006,200
8,0005,0003,0003,0002,0002,0001,5002,5002,0001,6001,6001,5001,0002,0001,5001,2001,000
700500600400350
1,0001,000
800600500500400300200250500500400300250250500500300250300250200200250150150100400200250125150100
111111122222333333555
n/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/an/a
PBC
Field of applicationRound rings are designed for assembly into many fittings. Rings are all made by TIG Argon welding.
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF317 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
SF317
Note E1 : Breaking load is described as the load point where welding fails. Deformation load is however lower and is dependent on the diameter of rod and circumference of ring. A general rule is to assume deformation load at around 1/5 of breaking load.
Note:(1) See Note : E1 Refer to page IV - class 11 load characteristics
L
D
SF317Round ring
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC76
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF317
SS316
Ø D(mm)
910101010101010101010101012121212121212121212131313131313131313131313
L(mm)
90405055606570758090
100120140
606570758090
100110120140
556065708090
100120130140150160
6317-09906317-10406317-10506317-10556317-10606317-10656317-10706317-10756317-10806317-10906317-10106317-10126317-10146317-12606317-12656317-12706317-12756317-12806317-12906317-12106317-12116317-12126317-12146317-13556317-13606317-13656317-13706317-13806317-13906317-13106317-13126317-13136317-13146317-13156317-1316
SS304
4317-09904317-10404317-10504317-10554317-10604317-10654317-10704317-10754317-10804317-10904317-10104317-10124317-10144317-12604317-12654317-12704317-12754317-12804317-12904317-12104317-12114317-12124317-12144317-13554317-13604317-13654317-13704317-13804317-13904317-13104317-13124317-13134317-13144317-13154317-1316
SIZE(mm)
9*9010*4010*5010*5510*6010*6510*7010*7510*8010*90
10*10010*12010*14012*6012*6512*7012*7512*8012*90
12*10012*11012*12012*14013*5513*6013*6513*7013*8013*90
13*10013 *12013*13013*14013*15013*160
B.L.(1)
(kgs)
6,2008,5008,5008,5008,5008,5008,5008,5008,5008,5008,5008,5008,500
10,00010,00010,00010,00010,00010,00010,00010,00010,00010,00011,50011,50011,50011,50011,50011,50011,50011,50011,50011,50011,50011,500
80250150125150130100100100
70754535
125120100
8080
10050454025
125100
90705050503035353520
item no.
Material SF3171
SS316
D(mm)
66889
10101010121212
L(mm)
304040506050607080506580
6317-16306317-16406317-18406317-18506317-19606317-11506317-11066317-11076317-11086317-11256317-11266317-1128
SIZE(mm)
6*306*408*408*509*60
10*5010*6010*7010*8012*5012*6512*80
B.L.(1)
(kgs)
2,7002,7005,0005,0006,2008,5008,5008,5008,500
10,00010,00010,000
800600250250150130125100100n/a110
60
SF317 Round ring (Continue from previous page)
L
D
SF3171Round ring(center cross bar)
Field of applicationRound rings (center cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1 Refer to page IV - class 11 load characteristics
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3171 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
SF3171
Material S
431431431431431431431431431431431431431431431431431431
Round ring(Continue from previous page)
Round ring
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
77
Rings & Eye plates
item no.
Material SF3250
SS316
B(mm)
16202630202730353951263035394552602630353945515560705145515560657075806070506065708090
102
Ø D(mm)
3333444444555555566666666678888888899
10101010101010
L(mm)
1417222517222530344322253034384351222530343843475160433843475155606468526043515560687787
6325-03156325-03206325-03256325-03306325-04206325-04256325-04306325-04356325-04406325-04506325-05256325-05306325-05356325-05406325-05456325-05506325-05606325-06256325-06306325-06356325-06406325-06456325-06506325-06556325-06606325-06706325-07506325-08456325-08506325-08556325-08606325-08656325-08706325-08756325-08806325-09606325-09706325-01506325-01606325-02656325-01706321-01806325-01906325-0110
SS304
4325-03154325-03204325-03254325-03304325-04204325-04254325-04304325-04354325-04404325-04504325-05254325-05304325-05354325-05404325-05454325-05504325-05604325-06254325-06304325-06354325-06404325-06454325-06504325-06554325-06604325-06704325-07504325-08454325-08504325-08554325-08604325-08654325-08704325-08754325-08804325-09604325-09704325-01504325-01604325-02654325-01704321-01804325-01904325-0110
SIZE(mm)
3*153*203*253*304*204*254*304*354*404*505*255*305*355*405*455*505*606*256*306*356*406*456*506*556*606*707*508*458*508*558*608*658*708*758*809*609*70
10*5010*6010*6510*7010*8010*9010*100
B.L.(1)
(kgs)
600600600600800800800800800800
1,0001,0001,0001,0001,0001,0001,0001,8001,8001,8001,8001,8001,8001,8001,8001,8002,2002,8002,8002,8002,8002,8002,8002,8002,8003,5003,5005,0005,0005,0005,0005,000 5,0005,000
6,4004,0003,0002,4003,0002,0001,5001,5001,500
8001,8001,2001,2001,000
750450400
1,0001,200
700700600500450300250400400300250250250200150200150175150150150150
807075
D
B
L
SF3250Dee ring
Field of applicationDee rings are designed for assembly into many fittings. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1 Refer to page IV - class 1 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF3250 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
SF3250
432432432432432432432432432432432432432432432432432432432
Note:(1) See Note : E1 on page E1 Refer to page IV - class 1 load characteristics
* For more information on symbols, refer to page 17.Piece per carton.78
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF4900 B
(mm)
20263239524765
Ø D(mm)
5555678
L(mm)
12.015.018.021.025.430.038.0
SS304
4490-05204490-05254490-05304940-05404490-06504490-07474490-0865
SIZE(mm)
5*205*255*305*406*507*478*65
B.L.(1)
(kgs)
1,0001,0001,0001,0001,5001,8003,300
1,5001,5001,2001,000
600500200
item no.
Material SF32501 B
(mm)
455248504550
Ø D(mm)
556688
Ø D1(mm)
445566
L(mm)
394345433643
SS304
4325-01544325-01554325-01644325-01654325-01844325-0185
SIZE(mm)
5*455*506*456*508*458*50
B.L.(1)
(kgs)
1,0001,0001,8001,8002,8002,800
500500450450250250
item no.
Material SF3252 B
(mm)
3520304045404551704550
Ø D(mm)
34555666788
L(mm)
3518303639364045704145
SS304
4325-23354325-24204325-25304325-25404325-25454325-26404325-26454325-26504325-27704325-28454325-2850
SS316
6325-23356325-24206325-25306325-25406325-25456325-26406325-26456325-26506325-27706325-28456325-2850
SIZE(mm)
3*354*205*305*405*456*406*456*507*708*458*50
B.L.(1)
(kgs)
600900
1,3001,3001,3002,0002,0002,0002,2002,8002,800
3,2003,0001,2001,2001,000
700700600300450400
item no.
Material SF3251 B
(mm)
4652464652465261
C(mm)
55445555
Ø D(mm)
55666888
Ø D1(mm)
55555666
L(mm)
4145415345414554
SS304
4325-15454325-15504325-16434325-16454325-16504325-18454325-18504325-1860
SS316
6325-15456325-15506325-16436325-16456325-16506325-18456325-18506325-1860
SIZE(mm)
5*455*506*436*456*508*458*508*60
B.L.(1)
(kgs)
1,3001,3001,8001,8001,8002,8002,8002,800
600500500500500300250250
Field of applicationSquare rings and Dee rings (cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding.
Technical DataForging material : AISI304 - DIN 1.4301Production : SF4900 - Ring - Welded SF32501 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationTriangle rings and Triangle rings (cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1 Refer to page IV - class 12 load characteristics
Technical DataForging material : AISI304 - DIN 1. 4301/ AISI316 - DIN 1.4401Production : SF3252 - Ring - Welded SF3251 - Ring - Welded Surface treatment : "E.P. " (Electro polished)
SF4900Square ring
SF32501Dee ring (cross bar)
D
B
L
D1
C
B
L D
SF3252Triangle ring
SF3251Triangle ring (cross bar)
D
L
B
D1
B
LD
SF4900, SF32501
SF3252, SF3251
432432432432
item no.
Material S
432432432432432432432432
Note:(1) See Note : E1 on page E1 Refer to page IV - class 12 load characteristics
Triangle ring
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
79
Rings & Eye plates
item no.
Material SF319 Ø C
(mm)
20303535404545505050506060606060
Ø D(mm)
3566788999
101212121212
L(mm)
60607575757580
110120140100110120150180200
M(thread)
M5M5M6M6M6M8M8
M10M10M10M10M12M12M12M12M12
SS304
4319-00034319-00054319-00064319-06604319-00074319-00084319-08804319-00094319-91204319-91404319-01104319-00124319-01214319-01224319-01234319-0124
SIZE(mm)
356
6*6078
8*809
9*1209*140
10*10012
12*12012*15012*18012*200
B.L.(1)
(kgs)
400550
1,0001,0001,0001,8001,8002,4002,4002,4002,4004,0004,0004,0004,0004,000
1,5001,000
400500400200200100100100100100
60605045
item no.
Material SF319 Ø C
(mm)
5050505050505050757575757575757575
Ø D(mm)
66668888
101010101212121212
Ø D1(mm)
66668888
101010101212121212
L(mm)
406080
1006080
100120
6080
100120
80100120140160
SS316
6329-06406329-06606329-06806329-06106329-08606329-08806329-08106329-08126329-01606329-01806329-01106329-01126329-02806329-02106329-02126329-02146329-0216
SIZE(mm)
6*406*606*80
6*1008*608*80
8*1008*12010*6010*80
10*10010*12012*80
12*10012*12012*14012*160
B.L.(1)
(kgs)
900900900900
1,6001,6001,6001,6002,5002,5002,5002,5003,5003,5003,5003,5003,500
300250250250150140125125
756560605050504040
L
M
CL
D1
Technical DataCasting material : AISI316 - DIN 1.4408Production : S329 - Ring - Welded Bolt - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationRing wooden screws are designed for assembly into wood panel for many applications. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1 Refer to page IV - class 13 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF319 - Ring - Welded Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationRing bolts (with washer and nut) are designed for assembly into many applications. Rings are all made by TIG Argon welding.
S329
SF319
Pliers
D
SF319 Ring bolt(with washer and nut)
S329 Ring wooden screw
* For more information on symbols, refer to page 17.Piece per carton.80
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
D
M
L
C
LD1
L
Technical DataForging material : AISI304 - DIN 1.4301 SF318 - Ring - Welded Nail - Forged SF126 - Ring - Welded Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationRing nails are designed for hammering into wood panel for many applications. Rings are all made by TIG Argon welding.Ring bolts (with two washers and nut) are designed for screw in to different panels for different applications. Rings are all made by TIG Argon welding.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S319LT - Ring - Welded Bolt - See chart S3192 - Ring - Welded Bolt - See chart SF3192 - Ring - Welded Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLag ring bolts are designed for screw into wooden panels for different applications. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1 Refer to page IV - class 13 load characteristics
SF318, SF126
S319LT, S3192, SF3192Pliers
Hammer
SF318Ring nail
SF126Ring bolt(with two washers and nut)
S319LT/ S3192/SF3192Lag ring bolt
item no.
Material SF318 Ø C
(mm)
2530354045
Ø D(mm)
34568
L(mm)
4550606565
SS304
4318-00034318-00044318-00054318-00064318-0008
SIZE(mm)
34568
B.L.(1)
(kgs)
400700
1,1501,9502,700
2,0001,200
700400250
item no.
Material SF126 Ø C
(mm)
3232
Ø D(mm)
66
L(mm)
85100
M(thread)
M10M10
SS304
4126-10854126-1010
SIZE(mm)
10*8510*100
B.L.(1)
(kgs)
2,5002,500
300250
item no.
Material S319LT Ø C
(mm)
253050
Ø D(mm)
357
Ø D1(mm)
468
L(mm)
455060
Bolt
ForgedCastCast
SS316
6319-90036319-90056319-9007
SIZE(mm)
357
B.L.(1)
(kgs)
550900
1,500
1,400700250
item no.
Material S3192 Ø C
(mm)
3030505060607575
Ø D(mm)
6688
10101212
Ø D1(mm)
6688
10101212
L(mm)
5560608080
100100120
Bolt
CastForged
CastCastCastCastCastCast
SS316
6319-26556319-26616319-28606319-28806319-21086319-21106319-21216319-2122
SIZE(mm)
6*556*608*608*80
10*8010*10012*10012*120
B.L.(1)
(kgs)
900900
1,5001,5002,5002,5003,5003,500
600500200180
75100
5050
item no.
Material SF3192 Ø C
(mm)
2530305050506060
Ø D(mm)
366888
1010
Ø D1(mm)
466888
1010
L(mm)
4555606080
10080
100
SS316
2319-24452319-26552319-26612319-28602319-28802319-28102319-21082319-2110
SIZE(mm)
4*456*556*608*608*80
8*10010*80
10*100
B.L.(1)
(kgs)
550900900
1,5001,5001,5002,5002,500
1,500600500200180n/a75
100
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
81
Rings & Eye plates
item no.
Material SF308 Ø C
(mm)
25
Ø D(mm)
6
Ø E(mm)
35
L(mm)
40
T(mm)
3
SS304
4308-0640
SIZE(mm)
6*40
B.L.(1)
(kgs)
1,350400
item no.
Material SF3215 Ø D
(mm)
568
Ø E(mm)
334050
L(mm)
202325
M(thread)
M6M8
M10
SS304
4321-50054321-50064321-5008
SIZE(mm)
568
B.L.(2)
(kgs)
400500
1,000
700450250
item no.
Material SF3205 Ø D
(mm)
568
Ø C(mm)
304050
Ø E(mm)
334050
L(mm)
202325
M(thread)
M6M8
M10
SS304
4320-50054320-50064320-5008
SIZE(mm)
568
B.L.(1)
(kgs)
400500
1,000
500300125
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3215 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationRound pad bolts are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF308 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationLag bolts (with wide washer and nut) are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1
Refer to page IV - class 8 load characteristics
SF308
SF3215
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3205 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationRound pad bolts (with ring) are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.
Note:(1) See Note : E1 on page E1
Refer to page IV - class 8 load characteristics
SF3205
E
L D
CM
LDT
L
SF308 Lag bolt (with wide washer and nut)
SF3215 Round pad bolt
SF3205 Round pad bolt (with ring)
) See Note : E1 on page E1
Refer to page IV - class 8 load characteristics
* For more information on symbols, refer to page 17.Piece per carton.82
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF3214 Ø D
(mm)
568
Ø E(mm)
334050
Ø S(mm)
4.54.55.5
M(thread)
M6 M8
M10
SS304
4321-40054321-40064321-4008
SIZE(mm)
568
B.L.(1)
(kgs)
7001,0001,600
1,200600300
item no.
Material SF3214H Ø D
(mm)
568
B(mm)
81214
Ø E(mm)
334050
Ø S(mm)
4.54.55.5
SS304
4321-40054321-40064321-4008
SIZE(mm)
568
B.L.(1)
(kgs)
200220250
1,200700300
item no.
Material SF3204 Ø D
(mm)
568
Ø C(mm)
304050
Ø E(mm)
334050
Ø S(mm)
4.54.55.5
SS304
4320-40054320-40064320-4008
SIZE(mm)
568
B.L.(2)
(kgs)
7001,0001,600
600300150
E
SD
CS
B
DSF3214H Round pad - hook type
SF3214 Round pad
SF3204 Round pad (with ring)
Technical DataForging material : AISI304 - DIN 1.4301Surface treatment : "E.P. " (Electro polished)
Field of applicationRound pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(2) See Note : E1 on page E1 Refer to page IV - class 14 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3214H - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationRound pads - hook type are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
SF3204
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3214 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationRound pad bolts are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
SF3214
SF3214H
Round pad bolt
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
83
Rings & Eye plates
item no.
Material SF3212 E
(mm)
16192532
L(mm)
546581
100
L1(mm)
38465673
Ø S(mm)
5.05.66.56.5
SS304
4321-20054321-20064321-20084321-2009
SIZE(mm)
568
10
B.L.(1)
(kgs)
7001,0001,6001,700
1,200500200200
item no.
Material SF3212H D
(mm)
5689
B(mm)
8121416
L(mm)
546581
100
L1(mm)
38465673
Ø S(mm)
5.05.66.56.5
SS304
4321-21054321-21064321-21084321-2109
SIZE(mm)
568
10
B.L.(1)
(kgs)
200220250280
1,000800300200
item no.
Material SF3202 Ø D
(mm)
5689
Ø C(mm)
30405060
E(mm)
16192532
L(mm)
546581
100
Ø S(mm)
5.05.66.56.5
SS304
4320-20054320-20064320-20084320-2009
SIZE(mm)
5689
B.L.(2)
(kgs)
7001,0001,6001,900
500350150100
L1
S
E
C
D
L
B
D
SF3212Oblong pad
SF3212HOblong pad - hook type
SF3202Oblong pad (with ring)
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3212 - Pad - Welded Surface treatment : "E.P. " (Electro polished)
Field of applicationOblong pads are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
Field of applicationOblong pads - hook type are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3212H - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationOblong pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(2) See Note : E1 on page E1 Refer to page IV - class 14 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3202 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
p g Refer to page IV - class 14 load characteristics
Oblong pad
SF3212H
SF3202
SF3212
Diamond Cast Pad
* For more information on symbols, refer to page 17.Piece per carton.84
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF3211 Ø D
(mm)
568
L(mm)
596480
L2(mm)
151923
Ø S(mm)
4.14.15.1
SS304
4321-10054321-10064321-1008
SIZE(mm)
568
B.L.(1)
(kgs)
7001,0001,600
500400250
item no.
Material S3213 H
(mm)
21.027.529.035.0
L(mm)
668089
100
L2(mm)
20162225
Ø S(mm)
8.08.08.58.5
SS304
4321-31124321-32314321-32144321-3238
SIZE(inch)
1.1/2"*2.1/2"2"*3.1/8"
2.1/4"*3.1/2"2.3/8"*4"
B.L.(1)
(kgs)
2,2003,5004,0006,000
500180125125
item no.
Material SF3201 Ø C
(mm)
303545
Ø D(mm)
568
L(mm)
596480
L2(mm)
151923
Ø S(mm)
4.14.15.1
SS304
4320-10054320-10064320-1008
SIZE(inch)
568
B.L.(2)
(kgs)
7001,0001,600
500300150
L2
S
D
H
L2
SF3211Diamond pad
S3213Diamond cast pad
SF3201Diamond pad (with ring)
Field of applicationDiamond cast pads are designed for screw into all types of panels for different applications. Casting pad are thicker and stronger than standard diamond pads.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
Technical DataCasting material : AISI304 - DIN 1.4308Production : S3213 - Pad - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationDiamond pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(2) See Note : E1 on page E1 Refer to page IV - class 14 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3201 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
L
D
C
Field of applicationDiamond pads are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3211 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
SF3211
S3213
SF3201
) See Note : E1 on page E1 Refer to page IV - class 14 load characteristics
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
85
Rings & Eye plates
S
DC
LC
D
S
DL
C
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3216 - Ring - Welded SF3206 - Ring - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationSquare pads (swivel eye) and Square pads (swivel eye with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Technical DataForging material : AISI304 - DIN 1.4301Production : SF321 - Pad - Welded SF320 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationSquare pads and Square pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 14 load characteristics
SF3216Square pad (swivel eye)
SF3206Square pad (swivel eye with ring)
SF320Square pad (with ring)
SF321Square pad
SF3216, SF3206
SF321, SF320
Note:(2) See Note : E1 on page E1
Note:(2) See Note : E1 on page E1
D
B
L
SwivelSwivel
is 1/4 of breaking load. Refer to page IV - class 14 load characteristics Note:(2) S
Square pad
item no.
Material SF3216 Ø C
(mm)
151819
Ø D(mm)
568
L(mm)
354050
Ø S(mm)
4.24.25.2
SS304
4321-60054321-60064321-6008
SIZE(mm)
568
B.L.(1)
(kgs)
450700850
500350300
item no.
Material SF3206 Ø C
(mm)
304050
Ø D(mm)
568
L(mm)
354050
Ø S(mm)
4.24.25.2
SS304
4320-60054320-60064320-6008
SIZE(mm)
568
B.L.(2)
(kgs)
450700850
350250130
item no.
Material SF321 B
(mm)
303439
Ø D(mm)
568
L(mm)
344050
Ø S(mm)
4.14.15.3
SS304
4321-00054321-00064321-0008
SIZE(mm)
568
B.L.(1)
(kgs)
7001,0001,600
850500250
item no.
Material SF320 Ø C
(mm)
303545
B(mm)
303439
Ø D(mm)
568
L(mm)
344050
Ø S(mm)
4.14.15.3
SS304
4320-00054320-00064320-0008
SIZE(mm)
568
B.L.(2)
(kgs)
7001,0001,600
600300125
* For more information on symbols, refer to page 17.Piece per carton.86
Rings & Eye platesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF3221 H
(mm)
1212121214
L(mm)
4242424250
L1(mm)
1517192330
T(mm)
33334
SS316
6322-11546322-11746322-11946322-12346322-1305
SIZE(mm)
15*4217*4219*4223*4230*50
1,0001,000
900800500
L1
L
T
H
SF3221Square pad (without screw hole)
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3221 - Pad - WeldedSurface treatment : "E.P. " (Electro polished)
Field of applicationSquare pads (without screw hole) are designed for slide into special panels or welding onto panels. Pads are all made by TIG Argon welding.
SF3221
SLIDE
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
87
Rings & Eye plates
D
C
M
L
L
C
M
D
Field of applicationLifting eye nuts - SUS type are designed for screw into all types of threaded rods, specially designed for lifting of objects.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 15 load characteristics
Technical Data Casting material : AISI304 - DIN 1.4308 AISI316 - DIN 1.4408Production : S3061 - Nut - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationEye nuts are designed for screw into all types of threaded studs for different applications.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S582 - Nut - CastSurface treatment : "E.P. " (Electro polished)
S582Eye nut
S3061Lifting eye nut - SUS type
S582
S3061
Field of applicationEye nuts are designed for screw into all types ofthreaded studs for different applications.
Eye nut
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 15 load characteristics
Lifting eye nut - SUS type
item no.
Material S582 Ø C
(mm)
15202530354050607015202530354050
Ø D(mm)
68
1012141620242868
1012141620
L(mm)
27364553637290
108126
27364553637290
M(thread)
M6M8
M10M12M16M20M24M30M361/4"
5/16"3/8"
1/2"UNC5/8"3/4"
1"
SS316
6582-00066582-00086582-00106582-00126582-00166582-00206582-00246582-00306582-00366582-01046582-05166582-03086582-01026582-05086582-03046582-0001
SIZE(mm/inch)
68
10121620243036
1/4"5/16"3/8"
1/2" UNC5/8"3/4"
1"
B.L.(1)
(kgs)
1,3002,2002,6004,9007,000
10,00018,00022,00034,000
1,3002,2002,6004,9007,000
10,00018,000
1,500600400200100
75502010
1,500400600200100
7540
item no.
Material S3061 Ø C
(mm)
162025303540466016202530354050
Ø D(mm)
5.06.28.0
10.012.516.019.025.0
5.06.28.0
10.012.516.020.0
L(mm)
31.039.348.061.072.086.0
107.0135.0
31.039.348.061.072.086.0
111.0
M(thread)
M6M8
M10M12M16M20M22M301/4"
5/16"UNC3/8"UNC
1/2"5/8"UNC3/4”UNC
1"
SS316
6306-10066306-10086306-10106306-10126306-10166306-10206306-12206306-10306306-11046306-15166306-13086306-11026306-15086306-13046306-1101
SS304
4306-10064306-10084306-10104306-10124306-10164306-10204306-12204306-10304306-11044306-15164306-13084306-11024306-15084306-13044306-1101
SIZE(mm/inch)
68
101216202230
1/4"5/16" UNC3/8" UNC
1/2"5/8" UNC3/4" UNC
1"
B.L.(1)
(kgs)
1,1001,3002,6003,5008,000
10,50011,00020,000
1,2001,3002,6003,5008,000
10,50014,450
1,5001,000
500250125
504020
1,5001,000
500200125
7530
* For more information on symbols, refer to page 17.Piece per carton.88
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S80704 C
(mm)
324248
Ø D(mm)
6.58.0
10.0
L(mm)
36.545.052.0
M(thread)
M8M10M12
SS316
6807-04086807-04106807-0412
SIZE(mm)
81012
B.L.(1)
(kgs)
2,2003,6004,300
600400200
item no.
Material S580 Ø C
(mm)
1520253035405060152025303540
Ø D(mm)
68
10121416202468
10121420
L(mm)
3749627490
102126153
3749627490
126
M(thread)
M6M8
M10M12M16M20M24M301/4"
5/16"3/8"1/2"5/8"
1"
SS316
6580-00066580-00086580-00106580-00126580-00166580-00206580-00246580-00306580-01046580-05166580-03086580-01026580-05086580-0001
SIZE(mm/inch)
68
101216202430
1/4"5/16"3/8"1/2"5/8"
1"
B.L.(1)
(kgs)
1,3002,0002,6004,9007,000
10,00015,00020,000
1,3002,0002,6004,9007,000
15,000
1,200500300150100
703015
1,200500300150100
30
MC
D
L
LC
MD
Field of applicationEye bolts - AISI type are designed for screw into all types of panels for different applications. Threaded rod are TIG Argon welded to the casting eye.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 15 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S580 - Thread- Forged Bolt - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationRectangular eye nuts are designed for screw into all types of threaded rods, specially designed for lifting of objects with knitting of leather or synthetic strap.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 16 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Production : S80704 - Nut - CastSurface treatment : "E.P. " (Electro polished)
S80704
S80704Rectangular eye nut
S580Eye bolt - AISI type
S580
Refer to page IV - class 15 load characteristics
Eye bolt - AISI type
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
89
U-bolts & Eye bolts
item no.
Material S306 (Standard) Ø C
(mm)
16.020.024.530.035.039.550.016.020.024.530.035.039.550.0
Ø D(mm)
5.06.28.0
10.012.515.520.0
5.06.28.0
10.012.515.520.0
L(mm)
13.014.018.021.526.529.536.013.014.018.021.526.529.535.0
M(thread)
M6M8
M10M12M16M20M241/4"
5/16"3/8"1/2"5/8"3/4"
1"
SS316
6306-00066306-00086306-00106306-00126306-00166306-00206306-00246306-01046306-05166306-03086306-01026306-05086306-03046306-0100
SS304
4306-00064306-00084306-00104306-00124306-00164306-00204306-00244306-01044306-05164306-03084306-01024306-05084306-03044306-0100
SIZE(mm/inch)
68
1012162024
1/4''5/16"3/8"1/2"5/8"3/4"
1"
B.L.(1)
(kgs)
1,1001,8002,6003,5008,000
10,50014,550
1,1001,8002,6003,4008,000
10,50013,000
1,500800500200150
7030
1,500750400200125
7030
item no.
Material S306 (Special) Ø C
(mm)
16162025303535404040465050162025253030353540404650
Ø D(mm)
5.05.06.28.0
10.012.512.516.016.016.019.020.020.0
5.06.28.08.0
10.010.012.512.516.016.019.020.0
L(mm)
385050505050
1505080
15015050
1502"2"2"6"2"6"2"6"6"2"6"6"
M(thread)
M6M6M8
M10M12M16M16M20M20M20M22M24M241/4"
5/16"3/8"3/8"1/2"1/2"5/8"5/8"3/4"3/4"7/8"
1"
SS316
6306-06386306-06506306-08506306-10506306-12506306-16506306-16156306-20506306-20806306-20156306-22156306-24506306-24156306-41226306-51626306-30826306-38066306-20126306-21066306-58026306-85066306-43066306-30426306-87066306-0106
SS304
4306-06384306-06504306-08504306-10504306-12504306-16504306-16154306-20504306-20804306-20154306-22154306-24504306-24154306-41224306-51624306-80324306-38064306-20124306-21064306-58024306-85064306-43064306-30424306-87064306-0106
SIZE(mm/inch)
06*3806*5008*5010*5012*5016*50
16*15020*5020*80
20*15022*15024*50
24*1501/4"*2"
5/16"*2"3/8"*2"3/8"*6"1/2"*2"1/2"*6"5/8"*2"5/8"*6"3/4"*6"3/4"*2"7/8"*6"
1"*6"
B.L.(1)
(kgs)
1,1001,1001,8002,6003,5008,0008,000
10,50010,50010,50012,50014,55014,550
1,1001,8002,6002,6003,4003,4008,0008,000
10,50010,50012,50013,000
n/a1,000
500250150100
60505030
n/a30
n/a1,000
500200170150100100
6045502015
L
C
D
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S306 (Standard) - Thread - Forged Bolt - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationEye bolts - SUS type are longer and slender base than that of a standard bolt. Threaded rod are TIG Argon welded to the casting eye.
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S306 (Special) - Thread - Forged Bolt - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationEye bolts - SUS type are longer and slender base than that of a standard bolt. Threaded rod are TIG Argon welded to the casting eye.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
M
C
L
S306 StandardEye bolt - SUS type
S306 SpecialEye bolt - SUS type
S306 (Standard)
S306 (Special)
43064306430643064306430643064306430643064306430643064306
Refer to page IV - class 8 load characteristics
Eye bolts - SUS type
* For more information on symbols, refer to page 17.Piece per carton.90
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
Field of applicationLifting eye bolt (with washer and nut) for better gripping during assembly. Threaded rod are TIG Argon welded to the casting eye.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
Technical DataCasting material : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : S307 - Thread - Forged Bolt - CastSurface treatment : "E.P. " (Electro polished)
C
L
DD
S307 Lifting eye bolt (with washer and nut)
S307
Note: Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
item no.
Material S307 Ø C
(mm)
1616161620202020202020252525252525253030303030303030353535161616161620202020252525252525303030303030303030304050
Ø D(mm)
5.05.05.05.06.26.26.26.26.26.26.28.08.08.08.08.08.08.0
10.010.010.010.010.010.010.010.012.512.512.5
5.05.05.05.05.06.26.26.26.28.08.08.08.08.08.0
10.010.010.010.010.010.010.010.010.010.016.020.0
L(mm)
406080
1002838606480
100120
5080
100120140160200100120140150160165180200
75100150
40506080
1006080
100120
4580
100120125140
45506080
100120140150170220150150
SS316
6307-06406307-06606307-06806307-06106307-08286307-08386307-08606307-08646307-08806307-08106307-08126307-10056307-10806307-10106307-10126307-10146307-10166307-10206307-12106307-12126307-12146307-21006307-12166307-12176307-12186307-12206307-16756307-16706307-16156307-41406307-41506307-41606307-41806307-40116307-56606307-56806307-56106307-50126307-83456307-83806307-83106307-83126307-83136307-83146307-12456307-21666307-21656307-21806307-21106307-21126307-21146307-21156307-12706307-12226307-20156307-2415
SS304
4307-06404307-06604307-06804307-06104307-08284307-08384307-08604307-08644307-08804307-08104307-08124307-10054307-10804307-10104307-10124307-10144307-10164307-10204307-12104307-12124307-12144307-21004307-12164307-12174307-12184307-12204307-16754307-16104307-16154307-41404307-41504307-41604307-41804307-40114307-56604307-56804307-56104307-50124307-83454307-83804307-83104307-83124307-83134307-83144307-21454307-21504307-21664307-21804307-21104307-21124307-21144307-21154307-12704307-12224307-20154307-2415
SIZE(mm/inch)
0604006060060800610008028080380806008064080800810008120100501008010100101201014010160102001210012120121401215012160121651218012200160751610016150
1/4"*401/4"*501/4"*601/4"*80
1/4"*1005/16"*605/16"*80
5/16"*1005/16"*120
3/8"*453/8"*80
3/8"*1003/8"*1203/8"*1253/8"*1401/2"*451/2"'*501/2"*601/2"*80
1/2"*1001/2"*1201/2"*1401/2"*150
12170122202015024150
B.L.(1)
(kgs)
1,1001,1001,1001,1001,3001,3001,3001,3001,3001,3001,3002,6002,6002,6002,6002,6002,6002,6003,5003,5003,5003,5003,5003,5003,5003,5008,0008,0008,0001,1001,1001,1001,1001,1001,3001,3001,3001,3002,6002,6002,6002,6002,6002,6003,5003,5003,5003,5003,5003,5003,5003,5003,5003,500
10,50014,550
1,000800600600500400350300350250300250200150150175150125100100
757080807060758070
800700600600600500400250300250200175150150125150120120100100100
757575503525
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
91
U-bolts & Eye bolts
item no.
Material SF3191 Ø C
(mm)
11131313131313131717171717171717172121212121212121212525252525251813172121212525
M(thread)
M5M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M12M12M12M12M12M12M161/4"
5/16"3/8"3/8"3/8"1/2"1/2"
Ø D(mm)
4.405.255.255.255.255.255.255.257.007.007.007.007.007.007.007.007.008.808.808.808.808.808.808.808.808.80
10.7010.7010.7010.7010.7010.7014.45
5.406.948.408.408.40
11.2411.24
L(mm)
5040556080
100125160
356080
100110120125130150
506080
100120130140150200
80100120140150185150
60100
8081
100101120
SS316
6319-15506319-16406319-16556319-16606319-16806319-16106319-61256319-16166319-18356319-18606319-18806319-18106319-18116319-18126319-18886319-18136319-18156319-11506319-11066319-11076319-11016319-11026319-11036319-11146319-11046319-11126319-11266319-11216319-11226319-11236319-11246319-11856319-16156319-14166319-15116319-18316319-18326319-13816319-12146319-1212
SS304
4319-15504319-16404319-16554319-16604319-16804319-16104319-61254319-16164319-18354319-18604319-18804319-18104319-18114319-18124319-18884319-18134319-18154319-11504319-11064319-11074319-11014319-11024319-11034319-11144319-11044319-11124319-11264319-11214319-11224319-11234319-11244319-21854319-11654319-14164319-15114319-18314319-18324319-13814319-12144319-1212
SIZE(mm/inch)
5*506*406*556*606*80
6*1006*1256*1608*358*608*80
8*1008*1108*1208*1258*1308*15010*5010*6010*80
10*10010*12010*13010*14010*15010*20012*80
12*10012*12012*14012*15012*18516*1501/4"*60
5/16"*1003/8"*3-1/8"3/8"*3-3/16"
3/8"*1001/2"*4"
1/2"*120
B.L.(1)
(kgs)
6001,0001,0001,0001,0001,0001,0001,0001,8001,8001,8001,8001,8001,8001,8001,8001,8002,4002,4002,4002,4002,4002,4002,4002,4002,4003,5003,5003,5003,5003,5003,5007,5001,0001,8002,4002,4002,4003,5003,500
1,5001,000
8001,000
600700500400800500500250300350250250250250200250250200150200200150100125100125100100
751,000
250250250250100100
M
C
L
D
Field of applicationEye bolts (with double washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF3191 - Bolt - WeldedSurface treatment : "E.P. " (Electro polished)
SF3191Eye bolt (with double washer and nut)
SF3191
431431431431431431431431431431431431431431431431431431431
is 1/4 of breaking load. Refer to page IV - class 8 load characteristics
* For more information on symbols, refer to page 17.Piece per carton.92
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF3182 Ø C
(mm)
4.25.25.26.26.26.26.26.26.28.28.28.28.2
10.310.310.310.312.312.3
Ø C1(mm)
7.312.012.014.014.014.014.014.014.018.018.018.018.020.020.020.020.024.524.5
L(mm)
455560404550556080607580
1007580
100120100120
L1(MM)
30405028303336405540505565505565806580
SS316
2318-24452318-25552318-25602318-26402318-26452318-26502318-26552318-26602318-26802318-28602318-28752318-28802318-28102318-21752318-21802318-21102318-21122318-21272318-2122
SIZE(mm/inch)
4*455*555*606*406*456*506*556*606*808*608*758*80
8*10010*7510*80
10*10010*12012*10012*120
5,000n/an/a
1,500n/an/a
1,3001,7001,0001,000
800500n/an/a500350n/a300250
SF3182Eye bolt (wooden screw)
Technical DataForging material : AISI316 - DIN 1.4401Production : SF3182 - Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationEye bolts (wooden screw) are designed for screw into wooden panels for lifting purposes.
C1L
C
C1L
FFFFFFFFFFFFFFFFFFF
Pliers SF3182
L1
12.3 24.5 120 802318-2122 12*120 250F
* For more information on symbols, refer to page 17.Piece per carton. UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
93
U-bolts & Eye bolts
item no.
Material S3291 Ø C
(mm)
11111414141418181818222222222727272727
Ø D(mm)
5566668888
101010101212121212
L(mm)
5060406080
1006080
100120
6080
100120
80100120140160
L1(mm)
30362436486036486072364860724860728496
SS316
6329-15506329-15606329-16406329-16606329-16806329-16106329-18606329-18806329-18106329-18126329-11606329-11806329-11106329-11126329-12806329-12106329-12126329-12146329-1216
SIZE(mm)
5*505*606*406*606*80
6*1008*608*80
8*1008*12010*6010*80
10*10010*12012*80
12*10012*12012*14012*160
1,0001,0001,000
700800600500350300300250200200200150125100100
85
LD
C
L1
S3291Eye wooden screw
Field of applicationEye wooden screws are designed for screw into wooden panels for lifting purposes. The large eye profile allows easy gripping.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S3291 - Screw - CastSurface treatment : "E.P. " (Electro polished)
PliersS3291
* For more information on symbols, refer to page 17.Piece per carton.94
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material DIN444 Ø C
(mm)
10.110.110.1
Ø C1(mm)
202020
L(mm)
110120120
L1(mm)
657373
M(thread)
M10M103/8"
T(mm)
121212
SS316
6444-10116444-10126444-3812
SIZE(mm/inch)
10*11010*120
3/8"*120
300350350
item no.
Material SFDIN444 Ø C
(mm)
5.25.25.25.26.26.26.26.26.26.26.26.26.28.28.28.28.28.28.28.28.28.28.28.28.28.2
10.210.210.210.210.210.210.210.210.210.212.212.212.212.212.212.212.212.212.212.212.212.212.212.212.2
Ø C1(mm)
121212121414141414141414141818181818181818181818181820202020202020202020252525252525252525252525252525
L(mm)
304050602535404550607075802530354045506065707580
100120
404550606570758090
1005055606570758090
100110120130140150160
L1(mm)
202230361518222530364246501515182225283438404548607320232932354043465360252832353842455058657278859295
M(thread)
M5M5M5M5M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M10M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12
T(mm)
66667777777779999999999999
12121212121212121212141414141414141414141414141414
SS316
2444-05302444-05402444-05502444-05602444-05252444-06352444-06402444-06452444-06502444-06602444-06702444-06752444-06802444-08252444-08302444-08352444-84042444-08452444-08502444-08602444-08652444-08702444-08752444-08802444-08102444-81202444-10402444-10452444-10502444-10602444-10652444-10702444-10752444-10802444-10902444-10102444-12502444-12552444-12602444-12652444-12702444-12752444-12802444-12902444-12102444-12112444-1212 2444-12132444-12142444-12152444-1217
SIZE(mm)
5*305*405*505*606*256*356*406*456*506*606*706*756*808*258*308*358*408*458*508*608*658*708*758*80
8*1008*12010*4010*4510*5010*6010*6510*7010*7510*8010*90
10*10012*5012*5512*6012*6512*7012*7512*8012*90
12*10012*11012*12012*13012*14012*15012*160
4,0004,0004,0002,5002,5003,0002,0001,8001,7001,5001,0001,0001,0001,2001,2001,2001,2001,2001,0001,000
800700800800600300900800750600600600550500450400400400400400n/a300250250250250180200200150150
CC1
M
L
L1
T
DIN444, SFDIN444 Eye bolt
Field of applicationEye bolts are designed for screw into internal thread holes for lifting purposes.
Technical DataCasting material : AISI316 - DIN 1.4408Production : DIN444 - Bolt - Cast SFDIN444 - Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
DIN444, SFDIN444
item no.
Material
Field of applicationEye bolts are designed for screw into internal thread holes for lifting purposes.
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
95
U-bolts & Eye bolts
item no.
Material SFDIN444 Ø C
(mm)
16.216.216.216.216.216.216.216.216.216.216.218.218.218.218.218.218.218.218.218.218.218.218.218.222.222.222.222.222.222.222.222.222.222.222.2
8.28.28.28.28.2
10.210.210.210.210.212.212.212.212.212.216.216.216.216.216.218.218.218.218.218.2
Ø C1(mm)
323232323232323232323240404040404040404040404040454545454545454545454518181818182020202020252525252532323232324040404040
L(mm)
60708090
100110120130140150160
70758090
100110120130140150160180200
8090
100110120130140150160180200
406080
100120
40608090
1006080
100120140
6080
100120140
6080
100120140
L1(mm)
30354249566270758290963035404253606676808693
106120
384250546570808590
105118
22344860732032465360324558728530425670822640536680
M(thread)
M16M16M16M16M16M16M16M16M16M16M16M20M20M20M20M20M20M20M20M20M20M20M20M20M24M24M24M24M24M24M24M24M24M24M245/16"5/16"5/16"5/16"5/16"3/8"3/8"3/8"3/8"3/8"1/2"1/2"1/2"1/2"1/2"5/8"5/8"5/8"5/8"5/8"3/4"3/4"3/4"3/4"3/4"
T(mm)
1717171717171717171717222222222222222222222222222626262626262626262626
99999
1212121212141414141417171717172222222222
SS316
2444-16602444-16702444-16802444-16902444-16102444-16112444-16122444-16132444-16142444-16152444-16162444-20702444-20752444-20802444-20902444-20102444-20112444-20122444-20132444-20142444-20152444-20162444-20182444-20202444-24802444-24902444-24102444-24112444-24122444-24132444-24142444-24152444-24162444-41802444-24202444-56402444-56602444-56802444-56102444-56202444-38402444-38602444-38802444-83902444-38102444-21612444-21812444-21102444-21122444-21146444-58602444-58802444-58102444-58122444-58142444-34602444-34802444-34102444-34122444-3414
SIZE(mm/inch)
16*6016*7016*8016*90
16*10016*11016*12016*13016*14016*15016*16020*7020*7520*8020*90
20*10020*11020*12020*13020*14020*15020*16020*18020*20024*8024*90
24*10024*11024*12024*13024*14024*15024*16024*18024*200
5/16"*405/16"*605/16"*80
5/16"*1005/16"*120
3/8''*403/8"*603/8"*803/8"*90
3/8"*1001/2"*601/2"*80
1/2"*1001/2"*1201/2"*1405/8"*605/8''*80
5/8"*1005/8"*1205/8''*1403/4"*603/4"*80
3/4"*1003/4"*1203/4"*140
150150150150150130125100100
80100120120120100100
80807070606060506060605550505050504040
1,400900800600500900650500n/a400375300250200200250175135125125125100100
7570
SFDIN444Eye bolt(Continue from previous page)
CC1
M
L
L1
T
item no.
Material
(Continue from previous page)
* For more information on symbols, refer to page 17.Piece per carton.96
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SFDIN444FT Ø C
(mm)
5.25.25.25.26.26.26.26.26.26.26.26.26.26.28.28.28.28.28.28.28.28.28.28.28.2
10.210.210.210.210.210.210.210.210.210.210.212.2
Ø C1(mm)
12121212141414141414141414141818181818181818181818202020202020202020202025
L(mm)
3040506019253540455060707580303540506065707580
100120
4045506070758090
100110120
50
L1(mm)
223242521015253035405060657020253040505560657090
110303540506065708090
100110
35
M(thread)
M5M5M5M5M6M6M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M8M8M8M8
M10M10M10M10M10M10M10M10M10M10M10M12
SS316
2444-25302444-25402444-25502444-25602444-26122444-06252444-26352444-26402444-26452444-26502444-26602444-26702444-26752444-26802444-28302444-28352444-28402444-28502444-28602444-28652444-28702444-28752444-28802444-28102444-28122444-21402444-21452444-21502444-21602444-21702444-21752444-21802444-21902444-21002444-21112444-21202444-2250
SIZE(mm)
5*305*405*505*606*196*256*356*406*456*506*606*706*756*808*308*358*408*508*608*658*708*758*80
8*1008*12010*4010*4510*5010*6010*7010*7510*8010*90
10*10010*11010*12012*50
n/an/an/an/a
4,0003,000
n/an/an/an/a
1,5002,000
n/an/an/an/a
1,000900n/an/an/an/a700500n/an/an/a750n/an/an/an/an/an/an/an/an/a
Field of applicationEye bolts (full thread) are heavy duty forging eye bolts designed with longer thread lenght for heavy load liftings.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : SFDIN444FT- Bolt - Forged Surface treatment : "E.P. " (Electro polished)
SFDIN444FTEye bolt (full thread)
SFDIN444FT
ML
L1
CC1
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
10.212.2
2025
12050
11035
M10M12
2444 21202444-2250
10 12012*50
n/an/a
FF
* For more information on symbols, refer to page 17.Piece per carton. UpsetForgingF
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
97
U-bolts & Eye bolts
M
H
L
T
M
T
H
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : DIN316 - Thread - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationWing bolts are designed for screw into internal thread holes for tightening of a surface panels.
DIN 316Wing bolt
DIN 315Wing nut
(Continue to next page)
DIN316
Field of applicationWing nuts are designed for screw onto external thread rods for tightening of a surface panels.
Technical DataCasting material : AISI316 - DIN 1.4408Production : DIN315 - Nut - CastSurface treatment : "E.P. " (Electro polished)
DIN315
Field of applicationWing nuts are designed for screw onto externalthread rods for tightening of a surface panels.
Surface treatment : E.P. (Electro polished)
Field of applicationWing bolts are designed for screw into internal thread holes for tightening of a surface panels.
(Continue
item no.
Material DIN315 H
(mm)
9.512.016.020.025.032.036.045.056.012.016.020.025.032.036.045.056.0
M(thread)
M4M5M6M8
M10M12M16M20M243/16"1/4''
5/16''3/8''1/2"5/8''3/4''
1''
T(mm)
468
10121416202468
101214162024
SS316
6331-50046331-50056331-50066331-50086331-50106331-50126331-50166331-50206331-50246331-53166331-51046331-55166331-53086331-51026331-55086331-53046331-5001
SIZE(mm/inch)
M4M5M6M8
M10M12M16M20M24
3/16''1/4''
5/16''3/8''1/2''5/8''3/4''
1''
2,5005,0003,0001,500
800400300120
705,00030001500
800400300120
70
item no.
Material DIN316 H
(mm)
1212121212121616
L(mm)
1015202530351620
M(thread)
M5M5M5M5M5M5M6M6
T(mm)
66666688
SS316
6316-02106316-05156316-05206316-05256316-05306316-05356316-06166316-0620
SIZE(mm/inch)
5*105*155*205*255*305*356*166*20
3,2003,0002,5002,5003,0002,0002,0002,000
* For more information on symbols, refer to page 17.Piece per carton.98
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material DIN316 H
(mm)
161616161620202020202025252525252525323232323232363636454556323645
L(mm)
253035405016202530405020253040506080202435405080253060308095506080
M(thread)
M6M6M6M6M6M8M8M8M8M8M8
M10M10M10M10M10M10M10M12M12M12M12M12M12M16M16M16M20M20M24 1/2" 5/8" 3/4"
T(mm)
88888
10101010101012121212121212141414141414161616202024141620
SS316
6316-06256316-06306316-06356316-06406316-06506316-08166316-08206316-08256316-08306316-08406316-08506316-10206316-10256316-10306316-10406316-10506316-10606316-10806316-12206316-12246316-12356316-12406316-12506316-12806316-16256316-16306316-16606316-20306316-20806316-24956316-21506316-58606316-3480
SIZE(mm/inch)
6*256*306*356*406*508*168*208*258*308*408*50
10*2010*2510*3010*4010*5010*6010*8012*2012*2412*3512*4012*5012*8016*2516*3016*6020*3020*8024*95
1/2"*505/8"*603/4"*80
2,0001,5001,5001,2001,000
950900850900800600600500400400400300300300300300250200150200200120100
6030
200120
60
item no.
Material S80701 L
(mm)
240240240
L1(mm)
404040
M(thread)
M16M20M24
T(mm)
303030
SS316
6807-01166807-01206807-0124
SIZE(mm)
M16M20M24
505050
item no.
Material S31501 L
(mm)
51647486
108122134
L1(mm)
16202328364045
M(thread)
M8M10M12M16M20M22M24
T(mm)
9.512.014.016.020.022.024.0
SS316
6305-01086305-01106305-01126305-01166305-01206305-01226315-0124
SIZE(mm)
M8M10M12M16M20M22M24
700600400300150100
50
T
M
L
L1
S80701Wide wing nut - long type
S31501Wing nut - long type
Field of applicationWide wing nuts - long type and Wing nuts - long typeare specifically designed for screw onto an external threaded rod for tightening of a surface panel. The wing profile allows easy griping with a one hand motion. The long wing profile allows easy griping with a two hand motion.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S80701 - Nut - Cast S31501 - Nut - CastSurface treatment : "E.P. " (Electro polished)
DIN 316(Continue from previous page)
S80701, S31501
(Continue from previous page)
are specifically designed for screw onto an external threaded rod for tightening of a surface panel. The wing profile allows easy griping with a one handmotion. The long wing profile allows easy gripingwith a two hand motion.
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
99
U-bolts & Eye bolts
item no.
Material S4600 C1
(mm)
181818182020202025252525323232323240404040434345454545
C(mm)
8.08.08.08.0
10.010.010.010.012.312.312.312.316.016.016.016.016.018.018.018.018.020.020.022.022.022.022.0
L(mm)
506075
1006080
100120
80100150160100120150160200120150160200140200100160200250
M(thread)
M8M8M8M8
M10M10M10M10M12M12M12M12M16M16M16M16M16M20M20M20M20M22M22M24M24M24M24
T(mm)
9999
1212121214141414171717171722222222232325252525
SS316
6460-08506460-08606460-08756460-08106460-10606460-01086460-01016460-01126460-12806460-01216460-01256460-12166460-16106460-16126460-01616460-01666460-01626460-20126460-02016460-02166460-02026460-22146460-22206460-02416460-24166460-02426460-0245
SIZE(mm)
8*508*608*75
8*10010*6010*80
10*10010*12012*80
12*10012*15012*16016*10016*12016*15016*16016*20020*12020*15020*16020*20022*14022*20024*10024*16024*20024*250
500500450400400200200200150125100100100
8075705050303030302530252520
L
T
M
C
C1
S4600Long wing bolt (with washer and nut)
S4600Technical DataCasting material : AISI316 - DIN 1.4408Production : S4600 - Bolt - CastSurface treatment : "E.P. " (Electro polished)
Field of applicationLong wing bolt (with washer and nut) are design for special purpose assembly where wing nut serves as a tightening devide to the eye bolt.
4522.0 250 M24 256460-0245 24*250 20
* For more information on symbols, refer to page 17.Piece per carton.100
U-bolts & Eye boltsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF413 D
(mm)
45677
101012
B(mm)
3035353535505060
L(mm)
62789080
10090
130150
M(thread)
M4M5M6M8M8
M10M10M12
L1(mm)
3040454050405565
SS316
6413-04606413-05806413-06906413-08806413-08106413-10906413-10136413-1215
SS304
4413-04604413-05804413-06904413-08804413-08104413-10904413-10134413-1215
SIZE(mm)
4*605*806*908*80
8*10010*90
10*13012*150
750600200200200100100
60
item no.
Material SF541 D
(mm)
10
B(mm)
35
L(mm)
76
M(thread)
M8
L1(mm)
32
SS304
4541-1007
SIZE(mm)
10*76 180
item no.
Material SF543 D
(mm)
10
B(mm)
35
L(mm)
65
M(thread)
M8
L1(mm)
23
SS304
4543-1006
SIZE(mm)
10*65 200
item no.
Material SF544 D
(mm)
10
B(mm)
35
L(mm)
90
M(thread)
M8
L1(mm)
47
SS304
4544-1090
SIZE(mm)
10*90 150
item no.
Material SF547 D
(mm)
10
B(mm)
35
L(mm)
115
M(thread)
M8
L1(mm)
47
SS304
4547-1011
SIZE(mm)
10*115 100
item no.
Material SF548 D
(mm)
10
B(mm)
35
L(mm)
140
M(thread)
M8
L1(mm)
47
SS304
4548-1014
SIZE(mm)
10*140 100
item no.
Material SF549 D
(mm)
10
B(mm)
35
L(mm)
165
M(thread)
M8
L1(mm)
47
SS304
4549-1016
SIZE(mm)
10*165 100
L1
D
B
L
D
B
M
L
SF413 U-bolt (with washer and nut)
SF541, SF543, SF544, SF547, SF548, SF549Long U-bolt (with washer and nut)
SF413
Field of applicationU-bolts (with washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF413 - Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationLong U-bolts (with washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.
Technical DataForging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF541 - Bolt - Forged SF543 - Bolt - Forged SF544 - Bolt - Forged SF547 - Bolt - Forged SF548 - Bolt - Forged SF549 - Bolt - ForgedSurface treatment : "E.P. " (Electro polished)
SF541,SF543, SF544SF547, SF548, SF549
1035 165 M8474549-1016 10*165 100
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
101
U-bolts & Eye bolts
item no.
Material SAB/APL Ø D
(mm)
15202025
M(thread)
M5M5M6M8
SS316
6125-15036125-20036126-20456128-2506
B.L.(1)
(kgs)
750750
1,4002,200
600600600500
item no.
Material SAB/T/APL Ø D
(mm)
15202025
M(thread)
M5M5M6M8
SS316
6125-15736125-20736126-20746128-2576
B.L.(1)
(kgs)
750750
1,4002,200
600600600500
item no.
Material SAH/APL Ø D
(mm)
5.06.08.25.06.08.25.06.08.25.06.08.25.06.08.2
Ø D1(mm)
111317111317111317111317111317
L(mm)
9.09.7
11.210.011.012.911.312.514.812.714.016.914.215.919.3
L1(mm)
555555555555555
ANGLE(D° )202020252525303030353535404040
SS316
6182-01156182-01366182-01786182-51156182-51366182-51786183-01156183-01366183-01786183-51156183-51366183-51786184-01156184-01366184-0178
4,0003,0002,5004,0003,0002,5004,0003,0002,0003,0003,0002,0003,0003,0001,800
SAB/APLArchitecture ball(right hand thread)
SAB/T/APLArchitecture ballwith through tapped hole (right hand thread)
Field of applicationArchitecture balls are designed as a neat and aesthetic end stopper to all types of threaded end fittings. It is best used for interior decoration.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page 85 - class 22 load characteristic
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "M.F." (Matte Finished)
Field of applicationArchitecture balls with through tapped hole are neat and aesthetic fasteners for all types of threaded end fittings. It is best used for interior decoration.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page 85 - class 22 load characteristic
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "M.F." (Matte Finished)
DD
SAH/APLAngled hinge
L1
D
D1D
L
SAH/APL
SAB/T/APL
SAB/APL
Field of applicationAngle hinges are designed to provide an accurate angle support for all types of threaded end fittings. It is best used for interior stair decorations.
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "M.F. " (Matte finished)
M
M
class 22
* For more information on symbols, refer to page 17.Piece per carton.102
BalustradesBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF7806TR Ø D
(mm)
7.138.00
11.00
Ø D1(mm)
10.011.514.0
L(mm)
404555
SIZE(mm)
M5M6M8
M(thread)
M5M6M8
SS316
6780-65256780-66306780-6835
B.L.(1)
(kgs)
7501,4002,200
1,6001,200
600
item no.
Material SF7801/IR Ø D
(mm)
5.506.357.509.00
E(mm)
25253040
L(mm)
65657085
L1(mm)
20202025
M(thread)
M5M6M6M8
DIA Ø CABLE(mm)
3456
SS316
6780-13826780-13836780-13846780-1385
B.L.(2)
(kgs)
6001,0001,4002,200
2,0001,5001,200
750item no.
Material SF7801/IL Ø D
(mm)
5.506.357.509.00
E(mm)
25253040
L(mm)
65657085
L1(mm)
20202025
M(thread)
M5M6M6M8
DIA Ø CABLE(mm)
3456
SS316
6780-13876780-13886780-13896780-1390
B.L.(2)
(kgs)
6001,0001,4002,200
2,0001,5001,200
750
SF7806TRInside threaded domehead(right hand thread)
SF7801/IRInside threaded terminal (right hand thread),SF7801/ILInside threaded terminal (left hand thread)
Field of applicationInside threaded domehead are designed as a neat and aesthetic end stopper to all types of threaded end fittings. It is best used for balustrading.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page 86 - class 22 load characteristic
Technical DataForging material : AISI316 - DIN 1.4401Surface treatment : "E.P." (Electro polished)
Technical DataForging material : AISI316 - DIN 1.4401Surface treatment : "M.F." (Matte finished)
Field of applicationInside threaded terminals are designed as a neat and aesthetic connector between a cable and all types of external threaded end fittings. It is best used in combination with wooden screw for a clean profile to a wood surface.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class10 load characteristic
L
E
L1
D
M
L
D1
MD
SF7806TR
SF7801/IR, SF7801/IL
657085
202025
M6M6M8
456
1,0001,4002,200
1,5001,200
750
balustrades
6.37.59.0
6780-13886780-13896780-1390
1/4 of breaking load.
efer to page IV - class10 load characteristic
Inside threaded domehead
class 22
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
103
Balustrades
LL
BL
B
L
B
B
o o o
O
L
Field of applicationSnap shackles (stamped swivel jaw) and Snap shackle (cast swivel jaw) are designed for application where a simple light load version of a quick open/assembly pin is required.Snap shackles (cast swivel eye) are designed for applications where a free swivel action end is required.
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S2476 - Shackle - Cast Swivel - Forged Pin - Forged : S2478, S2482 Shackle - Cast Swivel - Cast Pin - ForgedSurface treatment : "E.P." (Electro polished)
Field of applicationSnap shackle heads and Fixed snap shackles are designed for applications where a permanent non-swivel action end is required. Snap shackle head are designed for assembly with external parts such as ball bearing blocks.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 15 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401 : S24821, S2483 Shackle - Cast Pin - ForgedSurface treatment : "E.P." (Electro polished)
S2476Snap shackle(stamped swivel jaw)
S2478Snap shackle(cast swivel jaw)
S2482Snap shackle(cast swivel eye)
B
S2483Fixed snap shackle
S24821Snap shackle head
a simple light load version of a quick open/assemblypin is required.Snap shackles (cast swivel eye) are designed for applications where a free swivel action end is required.
Snap shackle (stamped swivel jaw)
S2476, S2478, S2482
S24821, S2483
O
Swivel
For Assembly
item no.
Material S2476 B
(mm)
131522
L(mm)
6277
117
O(mm)
142027
SIZE
123
SS316
6247-61126247-62166247-6324
B.L.(2)
(kgs)
1,1002,0003,500
400200
50
item no.
Material S2478 B
(mm)
131322
L(mm)
7087
127
O(mm)
142027
SIZE
123
SS316
6247-81706247-82886247-8313
B.L.(2)
(kgs)
1,1002,0003,500
300140
50
item no.
Material S24821 B
(mm)
101215
L(mm)
425476
O(mm)
142027
SIZE
123
SS316
6248-21016248-21246248-2134
B.L.(1)
(kgs)
1,1002,0003,500
500300
80
item no.
Material S2482 B
(mm)
121622
L(mm)
6787
126
O(mm)
142027
SIZE
123
SS316
6248-20016248-20216248-2304
B.L.(2)
(kgs)
1,1002,0003,500
350200
60
333
PBC
item no.
Material S2483 B
(mm)
6.516.021.021.0
L(mm)
325670
102
O(mm)
9121925
SIZE
0123
SS316
6248-30006248-30016248-33226248-3333
B.L.(3)
(kgs)
4001,1002,0003,500
1,000500250100
133
n/a
PBC
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC104
Snap shackles & Pelican hooksBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S2464 B
(mm)
12
SIZE(mm)
52
L(mm)
52
O(mm)
10
SS316
6246-4052
B.L.(3)
(kgs)
830500 2
PBC
item no.
Material S2466 B
(mm)
15
SIZE(mm)
66
L(mm)
66
O(mm)
14
SS316
6246-6066
B.L.(3)
(kgs)
1,850250 3
PBC
item no.
Material S2468 B
(mm)
25
SIZE(mm)
96
L(mm)
96
O(mm)
18
SS316
6246-8096
B.L.(3)
(kgs)
3,50080 3
PBC
Field of applicationSnap shackles are designed for marine application where a rope friendly end with a quick release lever is required.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 1 load characteristics
Note:(3) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401 : S2464, S2466, S2468 Shackle - CastSurface treatment : "E.P." (Electro polished)
S2464/S2466/S2468Snap shackle
Snap shackle (cast swivel eye)
g Refer to page IV - class 2 load characteristics
Snap s
Fixed snap shackle
S2464, S2466, S2468
B
O
L
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
105
Snap shackles & Pelican hooks
item no.
Material S2831 L
(mm)
7575757575
100100100150
SIZE(inch)
3"3"3"3"3"4"4"4"6"
M(mm/inch)
M61/4"LH-UNF1/4"RH-UNF1/4"LH-UNC1/4"RH-UNC
M85/16"LH-UNF5/16"RH-UNF
M12
O(mm)
13.013.013.013.013.016.016.016.025.5
SS316
6283-10066283-11416283-31046283-31436283-31426283-10086283-15616283-15626283-1012
B.L.()
(kgs)
1,2001,2001,2001,2001,2001,5001,5001,5003,500
400300300n/a300200200200
50
item no.
Material S2831-I3 Ø D
(mm)
6.357.54
12.52
D1(mm)
3.304.306.35
SIZE(mm)
03I304I306I3
L(mm)
129130166
L1(mm)
757575
Dia Ø Cable(mm)
346
SS316
6283-13036283-14136283-1613
B.L.(2)
(kgs)
1,0001,0001,000
250300150
44
n/a
PBC
item no.
Material S2831-I4 Ø D
(mm)
7.549.08
12.5216.13
D1(mm)
4.305.306.358.40
SIZE(mm)
04I405I406I408I4
L(mm)
168176183213
L1(mm)
100100100100
Dia Ø Cable(mm)
4568
SS316
6283-14146283-15146283-16146283-1814
B.L.(2)
(kgs)
1,5001,5001,5001,500
150150100100
item no.
Material S2831I3 Ø D
(mm)
6.357.54
D1(mm)
3.54.3
SIZE(inch)
1/8"*1/4"5/32''*1/4"
L(mm)
122128
L1(mm)
7575
Dia Ø Cable(inch)
1/8''5/32"
SS316
6283-11316283-1135
B.L.(2)
(kgs)
1,2001,200
300300
item no.
Material S2831I4 Ø D
(mm)
9.08
D1(mm)
5.10
SIZE(inch)
3/16''*5/16"
L(mm)
160
L1(mm)
100
Dia Ø Cable(inch)
3/16"
SS316
6383-1143
B.L.(2)
(kgs)
1,500150
L1
D
L
L
M
O
D1
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : S2831 - Hook - Cast S2831-I3, S2831-I4, S2831-I6 S2831I3, S2831I4 Hook - Cast Terminal - ForgedSurface treatment : "E.P." (Electro polished)RH : Right hand threadLH : Left hand thread
Field of applicationPelican hooks are designed to be used on yatch mast. Terminals must be correctly selected for the application.Pelican hooks with stud terminal are specially designedfor yatch mast. Correct terminal must be chosen for the assembly.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 15 load characteristics
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 4 load characteristics
S2831-I3,I4,I6 / S2831I3,S2831I4Pelican hook with stud terminal
S2831Pelican hook
S2831,S2831-I3, S2831-I4,S2831-I6, S2831I3, S2831I4
Pelican hook with stud terminal
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC106
Snap shackles & Pelican hooksBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S890HP L
(mm)
100150
B(mm)
1013
SIZE(inch)
4"6"
O(mm)
1822
SS316
6890-00046890-0006
B.L.()
(kgs)
7601,200
20080
item no.
Material SF510 L
(mm)
6088
123
C(mm)
18.026.034.5
SIZE(mm)
7*189.5*26
15*34.5
Ø S(mm)
4.25.26.3
SS316
6510-71806510-95266510-1534
1,000500200
item no.
Material S510 L
(mm)
140140
C(mm)
3636
SIZE(mm)
17*3619*36
Ø S(mm)
6.66.6
SS316
6510-17366510-1936
150150
item no.
Material SF8282 Ø F
(mm)
3.304.305.306.357.308.30
10.50
Ø D(mm)
6.357.549.08
12.5214.2516.1317.85
SIZE(mm)
345678
10
L(mm)
83101112138144184208
SS316
6828-20036828-20046828-20056828-20066828-20076828-20086828-2010
1,400500500200160100
70
O
B
L
S890HPPelican hook with link
Technical DataCasting material : AISI316 - DIN 1.4408Production : S890HP - Hook - CastSurface treatment : "M.P. " (Mirror polished)
Field of applicationPelican hooks with link are designed for special on deck use on yatch and motorboats.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
CLL
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI316 - DIN 1.4401Production : SF8282 - Terminal Plate - Forged SF510 - Terminal Plate - Forged S510 - Terminal Plate - CastSurface treatment : "E.P." (Electro polished)
Field of applicationT-terminal and T-plate must be correctly chosenfor the fittings to work properly on yatch mast assemblies.
S S
SF51
L
S
C
L
D
F
SF8282T - terminal
SF510T - plate (type 1)
S510T - plate (type 2)
S890HP
SF8282, SF510, S510
item no.
Material
item no.
Material
Field of applicationT-terminal and T-plate must be correctly chosenfor the fittings to work properly on yatch mast assemblies.
T-terminal
item no.
Material
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics
Pelican hook with link
233
n/an/an/an/a
PBC
* For more information on symbols, refer to page 17.Piece per carton. Plastic Back Card. PBC
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
107
Snap shackles & Pelican hooks
Plastic NylonSheave
EL
T
SF8190Light pulley block(type A)
SF8240Light pulley block(type B)
SF8241Light pulley block(type C)
Technical DataStamping material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401Production : SF8190 - Sheave - Nylon Block - Sheet, Rivet - Pipe : SF8240, SF8241 Sheave - Nylon, Block - Sheet Rivet - PipeSurface treatment : "M.F." (Matte finished)
Field of applicationLight pulley blocks are designed for simple pulley function interior or in small boats.
SF8190
SF8240, SF8241
PipePlastic Nylon
PinPlastic Nylon
L
E
Technical DataStamping material : AISI304 - DIN 1.4301Production : SF8248, SF8258 - Sheave - Nylon Block - Sheet, Rivet - Pin SF8248P, SF8258P - Sheave - Nylon Block - Sheet, Rivet - PipeSurface treatment : "M.F." (Matte finished)
H
T
L
SF8248Pulley block(type D)
SF8258Pulley block(type F)
SF8258PPulley block(type G)
SF8248PPulley block(type E)
Field of applicationPulley blocks are designed for simple pulley functioninterior or in small boats.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 17 load characteristics
PinPlastic Nylon
PipePlastic Nylon
SF8248, SF8258
SF8248P, SF8258P
Pulley block
item no.
Material SF8190 E
(mm)
20
L(mm)
37
SIZE(mm)
19
T(mm)
6
SS304
4819-0019
B.L.(1)
(kgs)
300850
item no.
Material SF8240 E
(mm)
20
L(mm)
37
SIZE(mm)
19
T(mm)
6
SS316
6824-0019
B.L.(1)
(kgs)
300850item no.
Material SF8241 E
(mm)
20
L(mm)
37
SIZE(mm)
19
T(mm)
6
SS316
6824-1019
B.L.(1)
(kgs)
300850
item no.
Material SF8248 E
(mm)
25.5
H(mm)
9.5
L(mm)
38
SIZE(mm)
25
T(mm)
6.5
SS304
4824-8225
B.L.(1)
(kgs)
350800item no.
Material SF8248P E
(mm)
25.5
H(mm)
9.5
L(mm)
38
SIZE(mm)
25
T(mm)
6.5
SS304
4824-8025
B.L.(1)
(kgs)
350800item no.
Material SF8258 E
(mm)
26
H(mm)
10
L(mm)
44
SIZE(mm)
25
T(mm)
6.5
SS304
4825-8025
B.L.(1)
(kgs)
350700item no.
Material SF8258P E
(mm)
26
H(mm)
10
L(mm)
44
SIZE(mm)
25
T(mm)
6.5
SS304
4825-8125
B.L.(1)
(kgs)
350700
* For more information on symbols, refer to page 17.Piece per carton.108
Blocks & PulleysBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF8250 E
(mm)
26
H(mm)
10
L(mm)
45
SIZE(mm)
25
T(mm)
6.5
SS304
4825-0025
B.L.(1)
(kgs)
350600
item no.
Material SF8253 E
(mm)
26
H(mm)
10
L(mm)
57
SIZE(mm)
25
T(mm)
6.5
SS304
4825-3025
B.L.(1)
(kgs)
350500item no.
Material SF8253P E
(mm)
26
H(mm)
10
L(mm)
57
SIZE(mm)
25
T(mm)
6.5
SS304
4825-3125
B.L.(1)
(kgs)
350300item no.
Material SF8256 E
(mm)
26
E1(mm)
48
H(mm)
16
L(mm)
50
SIZE(mm)
25
T(mm)
6.5
SS304
4825-6025
B.L.(2)
(kgs)
350350item no.
Material SF8256P E
(mm)
26
E1(mm)
48
H(mm)
16
L(mm)
50
SIZE(mm)
25
T(mm)
6.5
SS304
4825-6125
B.L.(2)
(kgs)
350350item no.
Material SF8257 E
(mm)
26
H(mm)
10
L(mm)
58
SIZE(mm)
25
T(mm)
6.5
SS304
4825-7025
B.L.(1)
(kgs)
450600item no.
Material SF8257P E
(mm)
26
H(mm)
10
L(mm)
58
SIZE(mm)
25
T(mm)
6.5
SS304
4825-7125
B.L.(1)
(kgs)
450600
item no.
Material SF8250P E
(mm)
26
H(mm)
10
L(mm)
45
SIZE(mm)
25
T(mm)
6.5
SS304
4825-0125
B.L.(1)
(kgs)
350600item no.
Material SF8252 E
(mm)
26
H(mm)
10
L(mm)
45
SIZE(mm)
25
T(mm)
6.5
SS304
4825-2025
B.L.(1)
(kgs)
350500item no.
Material SF8252P E
(mm)
26
H(mm)
10
L(mm)
45
SIZE(mm)
25
T(mm)
6.5
SS304
4825-2125
B.L.(1)
(kgs)
350500
HL
E
L
T
H
E
L
E1
H
T
E E
T
H
L
Technical DataStamping material : AISI304 - DIN 1.4301Production : SF8250, SF8252 - Sheave - Nylon Block - Sheet, Rivet - Pin : SF8250P, SF8252P - Sheave - Nylon Block - Sheet, Rivet - PipeSurface treatment : "M.F." (Matte finished)
Field of applicationPulley blocks are designed for simple pulley function interior or in small boats.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 17 load characteristics
Technical DataStamping material : AISI304 - DIN 1.4301Production : SF8253, SF8256, SF8257 Sheave - Nylon, Block - Sheet Rivet - Pin : SF8253P, SF8256P, SF8257P Sheave - Nylon, Block - Sheet Rivet - PipeSurface treatment : "M.F." (Matte finished)
Field of applicationPulley blocks are designed for simple pulley functioninterior or in small boats.
Note:(2) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 18 load characteristics
SF8250PPulley block (type I)
SF8252Pulley block (type J)
SF8250Pulley block (type H)
SF8252PPulley block (type K)
SF8256Pulley block (type N)
SF8253Pulley block (type L)
SF8253PPulley block (type M)
SF8256PPulley block (type O)
SF8257PPulley block (type Q)
SF8257Pulley block (type P)
SF8257SF8253,SF8256
SF8250,SF8252
SF8250P,SF8252P
SF8257PSF8253P,SF8256P
PinPlastic Nylon
PipePlastic Nylon
PinPlastic Nylon
PipePlastic Nylon
L
T
Pin Nylon
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
109
Blocks & Pulleys
item no.
Material SF8671E C
(mm)
14
Ø D(mm)
6
H(mm)
18.1
L(mm)
110
SIZE(mm)
65
T(mm)
13
SS304
4867-1065 100item no.
Material SF8671H C
(mm)
14
Ø D(mm)
6
H(mm)
18.1
L(mm)
110
SIZE(mm)
65
T(mm)
13
SS304
4867-1165 100item no.
Material SF8672E C
(mm)
14
Ø D(mm)
6
H(mm)
34.7
L(mm)
125
SIZE(mm)
65
T(mm)
13
SS304
4867-2065 40item no.
Material SF8672H C
(mm)
14
Ø D(mm)
6
H(mm)
34.7
L(mm)
125
SIZE(mm)
65
T(mm)
13
SS304
4867-2165 40
item no.
Material S314-25 Ø D
(mm)27
L(mm)
79
SIZE(mm)
25
T(mm)
11.5
SS304
4314-0025
B.L.(1)
(kgs)
1,500200item no.
Material S314-32 Ø D
(mm)31.7
L(mm)
91.5
SIZE(mm)
32
T(mm)
12.5
SS304
4314-0032
B.L.(1)
(kgs)
1,800150item no.
Material S314-50 Ø D
(mm)50.2
L(mm)
124
SIZE(mm)
50
T(mm)
14.5
SS304
4314-0050
B.L.(1)
(kgs)
3,50060item no.
Material S314A Ø D
(mm)27.031.750.2
L(mm)
104117149
SIZE(mm)
253250
T(mm)
11.512.514.5
SS304
4314-06254314-06324314-0650
B.L.(1)
(kgs)
1,5001,8003,500
175125
50item no.
Material S314NL Ø D
(mm)253250
L(mm)
80.593.0
124.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4314-03254314-03324314-0350
B.L.(1)
(kgs)
1,5001,7002,800
200150
60item no.
Material S314NL Ø D
(mm)253250
L(mm)
103.5115.5147.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4314-04254314-04324314-0450
B.L.(1)
(kgs)
1,5001,7002,800
175125
60
SF8672HDouble steering cable pulley (hook top)
H
T
SF8672EDouble steering cable pulley (eye top)
L
D
C
SF8671ESteering cable pulley (eye top)
H
L
SF8671HSteering cable pulley (hook top)
T
C
D
Technical DataStamping material : AISI304 - DIN 1.4301Production : SF8671E, SF8671H, SF8672E, SF8272H Eye/Hook - Cast Sheave - Nylon Block (frame) - StampedSurface treatment : "M.F." (Matte finished)
Field of applicationSteering cable pulleys are designed for simple steering of cables in light load environment. Choose between eye or hook top and single or double sheave assembly.
Plastic Nylon
Double Nylon Sheave SF8672E, SF8672H
SF8671E, SF8671H
S314ANLMame block (nylon sheave with eye end)
DD
S314-25,32, S314-50Mame block (cast sheave)
S314NLMame block (nylon sheave)
TS314AMame block (cast sheave with eye end)
L
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Welding material : AISI304 - DIN 1.4301Production : S314-25, S314-32, S314-50, S314A Swivel eye - Cast, Sheave - Cast Block (sheet) - Stamped Eye end - Bar : S314NL, S314ANL Swivel eye - Cast, Sheave - Nylon Block (sheet) - Stamped Eye end - BarSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for light pulleyfunction in the finishing industry. Choose betweendifferent assembly setup for specific usage.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristics
Casting Sheave
Plastic Nylon
S314-25,32,50 S314A
S314NL, S314ANL
* For more information on symbols, refer to page 17.Piece per carton.110
Blocks & PulleysBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S315 C(mm)14.514.520.5
L(mm)
80.092.5
127.0
SIZE(mm)
253250
T(mm)
11.512.514.5
SS3044315-00254315-00324315-0050
B.L.(1)
(kgs)
1,5001,5002,500
1258035
item no.
Material S315A C
(mm)14.514.520.5
L(mm)
100113148
SIZE(mm)
253250
T(mm)
11.512.514.5
SS304
4315-01254315-01324315-0150
B.L.(1)
(kgs)
1,5001,5002,500
1007530
item no.
Material S315NL C
(mm)14.514.520.5
L(mm)
82.594.5
127.0
SIZE(mm)
253250
T(mm)
101014
SS304
4315-03254315-03324315-0350
B.L.(1)
(kgs)
1,5001,5002,500
1258050
item no.
Material S315ANL C
(mm)14.514.520.5
L(mm)
101113148
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4315-02254315-02324315-0250
B.L.(1)
(kgs)
1,5001,5002,500
1258030
item no.
Material S3141 C
(mm)13.014.520.5
L(mm)
87.5100.0142.0
SIZE(mm)
253250
T(mm)
89
15
SS304
4314-10254314-10324314-1050
B.L.(1)
(kgs)
1,5001,7002,800
200160
60item no.
Material S3151 C
(mm)13.013.020.5
L(mm)
87.5100.0142.0
SIZE(mm)
253250
T(mm)
8.09.0
14.5
SS304
4315-10254315-10324315-1050
B.L.(1)
(kgs)
9501,2002,800
150100
35item no.
Material S3141NL C
(mm)13.014.520.5
L(mm)
87.5100.0142.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4314-13254314-13324314-1350
B.L.(1)
(kgs)
1,5001,7002,800
200200
60item no.
Material S3151NL C
(mm)13.013.020.5
L(mm)
87.5100.0142.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4315-13254315-13324315-1350
B.L.(1)
(kgs)
9501,2002,800
150100
35
L
T
L
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Welding material : AISI304 - DIN 1.4301Production : S315 - Swivel eye - Cast, Sheave - Cast Block (sheet) - Stamped : S315A - Swivel eye - Cast, Sheave - Cast Block (sheet) - Stamped Eye end (bar) - Welded : S315NL - Swivel eye - Cast, Sheave - Nylon Block (sheet) - Stamped : S315ANL - Swivel eye - Cast, Sheave - Nylon Block (sheet) - Stamped Eye end (bar) - WeldedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for light pulleyfunction in the finishing industry. Choose betweendifferent assembly setup for specific usage.
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : S3141, S3151 Swivel eye - Cast, Sheave - Cast Block (sheet) - Stamped : S3141NL, S3151NL Swivel eye - Cast, Sheave - Nylon Block (sheet) - Stamped Surface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for light pulleyfunction in the finishing industry. Choose betweendifferent assembly setup for specific usage.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristics
S3141NLMame block (nylon sheave)
C
S3151NLMame block (double nylon sheave)
S3141Mame block (cast sheave)
S315Mame block (double cast sheave)
T
S315NLMame block (double nylon sheave)
S315ANLMame block (double nylon sheave with eye end)
T
S3151Mame block (double cast sheave)
L
S315AMame block(double cast sheave with eye end)
Double Nylon Sheave
Double Casting SheaveCasting Sheave
Plastic Nylon
Plastic Nylon
Double Casting Sheave
Casting Sheave
Double Nylon
Sheave
S315, S315A
S315NL, S315ANL
S3141, S3151
S3141NL, S3151NL
C
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
111
Blocks & Pulleys
C
Plastic NylonSheave
L
C
T
T
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : S3141/A, S3151/A Swivel eye - Cast Sheave - Cast Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for the fishing industry where heavy loading and pulley is needed. Choose between Nylon and stainless sleeve according to use.
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : S3141NL/A, S3151NL/A Swivel eye - Cast Sheave - Nylon Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for the fishing industry where heavy loading and pulley is needed. Choose between Nylon and stainless sleeve according to use.
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : S3141/B, S3151/B Swivel eye - Cast Sheave - Cast Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specificly designed for the fishing industry where heavy loading and pully is needed. Choose between Nylon and stainless sleeve according to use.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristics
L
S3141/BMame block (cast sheave)
S3151/BMame block (double cast sheave )
S3141/AMame block(cast sheave with eye plate)
S3151/AMame block (double cast sheave with eye plate)
S3141NL/AMame block (nylon sheave with eye plate)
S3151NL/AMame block(double nylon sheave with eye plate)
S3141/A, S3151/A
S3141NL/A, S3151NL/A
S3141/B, S3151/BDouble Casting SheaveCasting Sheave
Double Nylon SheavePlastic Nylon
Double Casting SheaveCasting Sheave
item no.
Material S3151/A C
(mm)13.013.020.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
8.09.0
14.5
SS304
4315-11254315-11324315-1150
B.L.(1)
(kgs)
9501,2002,800
150100
35
item no.
Material S3141/A C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
8.09.0
14.5
SS304
4314-11254314-11324314-1150
B.L.(1)
(kgs)
1,5001,7002,800
200175
60
item no.
Material S3141/B C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
89
15
SS304
4314-12254314-12324314-1250
B.L.(1)
(kgs)
1,5001,7002,800
n/a150n/a
item no.
Material S3151/B C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
89
15
SS304
4315-12254315-12324315-1250
B.L.(1)
(kgs)
9501,2002,800
n/a100n/a
item no.
Material S3141NL/A C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4314-14254314-14324314-1450
B.L.(1)
(kgs)
1,5001,7002,800
item no.
Material S3151NL/A C
(mm)13.013.020.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4315-14254315-14324315-1450
B.L.(1)
(kgs)
9501,2002,800
* For more information on symbols, refer to page 17.Piece per carton.112
Blocks & PulleysBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S3141NL/B C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4314-15254314-15324314-1550
B.L.(1)
(kgs)
1,5001,7002,800
n/a150
50
item no.
Material S3151NL/B C
(mm)13.014.520.5
L(mm)
103.5118.0162.0
SIZE(mm)
253250
T(mm)
10.010.013.5
SS304
4315-15254315-15324315-1550
B.L.(1)
(kgs)
9501,2002,800
n/a100
30
item no.
Material S314/H1 E
(mm)45
B(mm)
18
L(mm)
84.75
SIZE(mm)
50
T(mm)
14.5
SS304
4314-0150
B.L.(1)
(kgs)
1,20060
item no.
Material S212-E1-50 E
(mm)50
C(mm)20.5
L(mm)
157
SIZE(mm)
50
T(mm)
14.5
SS304
4212-1150
B.L.(1)
(kgs)
1,40030
item no.
Material S212-H1-50 E
(mm)50
C(mm)
24
L(mm)
184
SIZE(mm)
50
T(mm)
14.5
SS304
4212-2050
B.L.(1)
(kgs)
1,400
T
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : S3141NL/B, S3151NL/B Swivel eye - Cast Sheave - Cast Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for the fishing industry where heavy loading and pulley is needed. Choose between Nylon and stainless sleeve according to use.
L
L
C
S3141NL/BMame block (nylon sheave)
S3151NL/BMame block (double nylon sheave)
S314/H1Mame block (cast sheave with hook top)
E
B
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Stamping material : AISI304 - DIN 1.4301Production : S314/H1 - Hook - Forged Sheave - Cast Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationMame blocks are specifically designed for the fishing industry where heavy loading and pulley is needed. Choose between Nylon and stainless sleeve according to use.
S3141NL/B, S3151NL/B
C
L
E
T
Technical DataCasting material : AISI304 - DIN 1.4308Production : S212-E1-50, S212-H1-50 Swivel eye/Hook - Cast Sheave - Cast Block - CastSurface treatment : "E.P." (Electro polished)
Field of applicationSeine blocks are specifically designed for the fishing industry where nylon rope can be inserted with ease to the open latch system.
S212-E1-50Seine block 50 mm(eye top)
S212-H1-50Seine block 50 mm(hook top)
S212-E1-50, S212-H1-50
S314/H1Casting Sheave
Double Nylon SheavePlastic Nylon
Eye Hook
T
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
113
Blocks & Pulleys
item no.
Material S212-E1-75 C
(mm)25
L(mm)
220
E(mm)
75
SIZE(mm)
75
T(mm)
15
SS304
4212-1175
B.L.(1)
(kgs)
3,50015
item no.
Material S212-H1-75 C
(mm)25
L(mm)
242
E(mm)
75
SIZE(mm)
75
T(mm)
15
SS304
4212-3175
B.L.(1)
(kgs)
2,30015
item no.
Material S212-E1-100 C
(mm)70
B(mm)
43
E(mm)
100
SIZE(mm)
100
T(mm)
17
SS304
4212-3175
B.L.(1)
(kgs)
5,0008
item no.
Material S212-H1-100 C
(mm)25
B(mm)
43
E(mm)
100
SIZE(mm)
100
T(mm)
17
SS304
4212-2100
B.L.(1)
(kgs)
2,3005
EC
L
C
L
T
S212-E1-75Seine block 75 mm (eye top)
S212-H1-75Seine block 75 mm (hook top)
Technical DataCasting material : AISI304 - DIN 1.4308Production : S212-E1-75, S212-H1-75 Swivel eye/Hook - Cast Sheave - Cast Block - CastSurface treatment : "E.P." (Electro polished)
Field of applicationSeine blocks are specifically designed for the fishing industry where nylon rope can be inserted with ease to the open latch system.
S212-E1-75, S212-H1-75Eye Hook
S212-E1-100, S212-H1-100
T
CCE
B
C
S212-E1-100 Seine block 100 mm (eye top)
S212-H1-100Seine block 100 mm (hook top)
Technical DataCasting material : AISI304 - DIN 1.4308Production : S212-E1-100, S212-H1-100 Swivel eye/Hook - Cast Sheave - Cast Block - CastSurface treatment : "E.P." (Electro polished)
Field of applicationSeine blocks are specifically designed for the fishing industry where nylon rope can be inserted with ease to the open latch system.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristics
Eye Hook
Field of applicationSeine blocks are specifically designed for the fishingindustry where nylon rope can be inserted with ease to the open latch system.
* For more information on symbols, refer to page 17.Piece per carton.114
Blocks & PulleysBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S212L-E1 C
(mm)24
L(mm)
220
E(mm)
75
SIZE(mm)
75
T(mm)
22
SS304
4212-2175
B.L.(1)
(kgs)
3,50012item no.
Material S212L-H1 C
(mm)25
L(mm)
270
E(mm)
75
SIZE(mm)
75
T(mm)
22
SS304
4212-2275
B.L.(1)
(kgs)
2,30015
item no.
Material S313-E1 C
(mm)20.524.024.0
T(mm)
141619
L(mm)
124170205
SIZE(mm)
5075
100
SS304
4313-30504313-30754313-3100
B.L.(1)
(kgs)
3,5004,0005,500
603012
item no.
Material S313NL-E1 C
(mm)20.5
T(mm)
13.5
L(mm)
124
SIZE(mm)
50
SS304
4313-4450
B.L.(1)
(kgs)
1,50060
S313-E1, S313NL-E1
S212L-E1, S212L-H1
L
EL
E
C
T
Technical DataCasting material : AISI304 - DIN 1.4308Production : S212L-E1, S212L- H1 Swivel eye/Hook - Cast Sheave - Cast Block - CastSurface treatment : "E.P." (Electro polished)
Field of applicationSeine blocks are specifically designed for the fishing industry where nylon rope can be inserted with ease to the open latch system.
S212L-E1Seine block - heavy type (eye top)
S212L-H1Seine block - heavy type (hook top)
C
T
T
L
C
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Production : S313- E1- Swivel eye - Cast Sheave - Cast Block (sheet) - Stamped S313NL- E1 Swivel eye - Cast Sheave - Nylon Block (sheet) - StampedSurface treatment : "E.P." (Electro polished)
Field of applicationTaruma blocks are specifically designed for the fishing industry where heavy loading and pulley is needed. Choose between Nylon and stainless sleeve according to use.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristic
S313-E1 Taruma block (cast sheave with brass bushing)
S313NL-E1Taruma block (nylon sheave)
Plastic NylonSheave
Eye Wide type Hook Wide type
Eye Plastic NylonEye Stainless Sheave
Field of applicationSeine blocks are specifically designed for the fishingindustry where nylon rope can be inserted withease to the open latch system.
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
115
Blocks & Pulleys
item no.
Material S210-E1 L
(mm)
255325350
E(mm)
83113140
SIZE(mm)
75100125
T(mm)
161920
SS304
4210-11754210-11104210-1125
B.L.(1)
(kgs)
3,5005,5008,500
1564
item no.
Material S210-E2 L
(mm)
260325358
E(mm)
83113140
SIZE(mm)
75100125
T(mm)
161920
SS304
4210-12754210-12104210-1212
B.L.(1)
(kgs)
3,5005,5008,500
1043
item no.
Material S210-E3 L
(mm)
325
E(mm)
113
SIZE(mm)
100
T(mm)
19
SS304
4210-1310
B.L.(1)
(kgs)
5,5003
item no.
Material S210-H1 L
(mm)
275340385
E(mm)
83113140
Ø C(mm)
203535
SIZE(mm)
75100125
T(mm)
161920
SS304
4210-21754210-21104210-2112
B.L.(1)
(kgs)
2,3002,3003,950
1254
item no.
Material S210-H2 L
(mm)
280340395
E(mm)
83113140
Ø C(mm)
203535
SIZE(mm)
75100125
T(mm)
161920
SS304
4210-22754210-22104210-2212
B.L.(1)
(kgs)
2,3002,3003,950
1043
T
E
Technical DataCasting material : AISI304 - DIN 1.4308Welding material : AISI304 - DIN 1.4301Production : S210-E1, S210-E2, S210-E3 Swivel eye - Cast Sheave - Cast Block (sheet) - Stamped Block (frame) - Cast Eye end (Rod) - CastSurface treatment : "E.P." (Electro polished)
Field of applicationHeavy blocks are designed for heavy duty jobs. Choose between single, double or triple sheave.
S210-E1 Single heavy block (eye top)
S210-E2 Double heavy block(eye top)
S210-E3 Triple heavy block (eye top)
S210-H1Single heavy block (hook top)
S210-H2Double heavy block (hook top)
E
T
L
C
Technical DataCasting material : AISI 304 - DIN 1.4308Forging material : AISI 304 - DIN 1.4301Rod : AISI 304 - DIN 1.4301Production : S210-H1, S10-H2 Hook - Cast Sheave - Cast Block - Forged Eye end - RodSurface treatment : "E.P." (Electro polished)
Field of applicationHeavy blocks are designed for heavy duty jobs in fishing industry. Choose between single or double sheave assembly.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristic
L
S210-E1, S210-E2, S210-E3
S210-H1, S210-H2
Eye Casting Sheave Eye
Double Casting Sheave
Eye
Triple
Casting
Sheave
HookHook Casting SheaveCasting Sheave
item no.
Material
Field of applicationHeavy blocks are designed for heavy duty jobs. .Choose between single, double or triple sheave.
* For more information on symbols, refer to page 17.Piece per carton.116
Blocks & PulleysBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S211-E1 L
(mm)
250315355
E(mm)
83113140
C(mm)
203535
SIZE(mm)
75100125
T(mm)
151820
SS304
4210-11754210-11104210-1125
B.L.(1)
(kgs)
3,5005,0007,700
1055
item no.
Material S211-E2 L
(mm)
290315380
E(mm)
83113140
C(mm)
203535
SIZE(mm)
75100125
T(mm)
151720
SS304
4211-20754211-21004211-2125
B.L.(1)
(kgs)
3,5005,0007,700
85
n/aitem no.
Material S211-H1 L
(mm)
270335360
E(mm)
83113140
C(mm)
203535
SIZE(mm)
75100125
T(mm)
161920
SS304
4211-21754211-21104211-2112
B.L.(1)
(kgs)
2,3002,3003,950
1254
item no.
Material S211-H2 L
(mm)
305345390
E(mm)
83113140
C(mm)
203535
SIZE(mm)
75100125
T(mm)
151720
SS304
4211-22754211-22104211-2212
B.L.(1)
(kgs)
2,3002,3003,950
6n/an/a
item no.
Material S213-E1 E
(mm)
75100125150
C(mm)
20203030
B(mm)
20242730
SIZE(mm)
75100125150
T(mm)
16161820
SS316
6213-11756213-11106213-11256213-1150
B.L.(1)
(kgs)
4,0006,0008,000
10,000
12842
S211-E1Single snatch block (eye top)
S211-H2Double snatch block (hook top)
S211-H1Single snatch block (hook top)
T
C
S211-E2Double snatch block (eye top)
L
ETechnical DataCasting material : AISI 304 - DIN 1.4308Forging material : AISI 304 - DIN 1.4301Rod : AISI 304 - DIN 1.4301Production : S211- E1, S11-E2, S11-H1, S211-H2 Swivel eye/ Hook - Cast Sheave - Cast Block - Forged Eye end - RodSurface treatment : "E.P." (Electro polished)
Field of applicationSnatch block provides the extra versatility of openlatch for easy loading and unloading of rope. Chose between hook or eye top and single or double sheave assembly.
item no.
Material
item no.
Material
item no.
Material
Snatch block provides the extra versatility of openlatch for easy loading and unloading of rope. Chose between hook or eye top and single ordouble sheave assembly.
Double snatch block
Technical DataCasting material : AISI304 - DIN 1.4308Welding material : AISI304 - DIN 1.4301Production : S213- E1 - Swivel eye - Cast Sheave - Cast Block - Cast Eye end (rod) - WeldedSurface treatment : "E.P." (Electro polished)
Field of applicationTaruma blocks are designed ball bearing and copperinternal rings for heavy duty pulley applications. Top lever can be opened with a lever pin for easy loading and unloading of ropes.
Note:(1) Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 19 load characteristic
Render Section
E
B
C
T
S213-E1Taruma block (eye top)
S213-E1
S211-H1, S211-H2Hook Casting Sheave
Casting Sheave
S211-E1, S211-E2Eye Casting Sheave
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
117
Blocks & Pulleys
DD1
B
D
B
L
L
Instructions for application of S4100
1 2 3 4
S4100Folding anchor
S3230Hook anchor
Technical DataCasting material : AISI316 - DIN 1.4408Forging material : AISI304 - DIN 1.4301Production : S4100 - Anchor - Cast S4200 - Anchor - Cast S3230 - Anchor - WeldedSurface treatment : "M.P. " (Mirror polished)/ "E.P. " (Electro polished)
Field of applicationFolding anchors are casted with highest precision in material to avoid rust during sea operations. Plow anchors are casted with highest precision in material to avoid rust during sea operations. Hook anchors are TIG Argon welded with highest precision in material to avoid rust during sea operations.
S4100, S4200, S3230
item no.
Material S4100 L
(mm)
280330400460523
Ø D(mm)
17.0020.0021.9025.0028.18
B(mm)
280325410470575
SIZE(kgs/mm)
1.53.05.07.0
10.0
SS316
6410-01056410-00036410-00056410-00076410-0010
n/a8222
item no.
Material S3230 L
(mm)
205250
Ø D(mm)
1316
Ø D1(mm)
68
B(mm)
145220
SIZE(kgs/mm)
200240
SS304
4323-02004323-0240
3010
* For more information on symbols, refer to page 17.Piece per carton.118
Anchor, Cleats & Rod holdersBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S301 M
(thread)
5/16"-18UNC3/8"-16UNC3/8"-16UNC
L(mm)
121.6160.0214.3
B(mm)
30.538.051.0
SIZE(inch)
4.5"6"8"
SS316
6301-04056301-06006301-0800
502010
item no.
Material S506L L
(mm)
114150
S(mm)
56
B(mm)
2334
SIZE(inch)
4.1/2"6"
SS316
6506-14126506-1006
13050
item no.
Material S506R L
(mm)
114150
S(mm)
56
B(mm)
2334
SIZE(inch)
4.1/2"6"
SS316
6506-24126506-2006
13050
item no.
Material S4015 L
(mm)
68114150
S(mm)
4.55.86.7
SIZE(inch)
2.1/2"4.1/2"
6"
SS316
6401-52126401-54126401-5006
2,000500250Field of application
Rope cleats are manufactured with highest precisionin casting material to avoid any rust during sea application.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S4015 - Cleat - CastSurface treatment : "E.P. " (Electro polished)
S
L
Field of applicationPull up cleats are designed for assembly onto motorboats with internal rest settings for a strim line appearance.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S301 - Cleat - CastSurface treatment : "M.P. " (Mirror polished)
M
LB
L S
B
S4015
Field of applicationSkene chocks are manufactured with highest precision in casting material to avoid any rust during sea application.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S506L, S506R - Chocks - CastSurface treatment : "M.P. " (Mirror polished)
S506L,S506R
S301
S506L, S506RSkene chocks
S4015Rope cleat
S301Pull up cleat
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
119
Anchor, Cleats & Rod holders
item no.
Material S505 L
(mm)
100125150200250300
Ø S(mm)
4.55.56.58.58.58.5
E(mm)
36.046.053.068.082.582.5
SIZE(inch)
4"5"6"8"
10"12"
SS316
6505-00046505-00056505-00066505-00086505-00106505-0012
150125
50402015
item no.
Material S505H L
(mm)
150180
Ø S(mm)
66
E(mm)
5660
SIZE(inch)
6"7"
SS316
6505-50606505-5007
7540
item no.
Material S507 L
(mm)
100125150200250
Ø S(mm)
4.55.56.58.58.5
E(mm)
89
121516
SIZE(inch)
4"5"6"8"
10"
SS316
6507-00046507-00056507-00066507-00086507-0010
250140100
6040
item no.
Material S508 L
(mm)
100125150200255300380
Ø S(mm)
4.55.56.56.58.08.0
12.5
E(mm)
354245546871
115
SIZE(inch)
4"5"6"8"
10"12"15"
SS316
6508-00046508-00056508-00066508-00086508-00106508-00126508-0015
140100100
502015
5
S E
S505 Trim line cleat
S505HTrim line cleat - heavy type
S507Blue water cleat
S508Low flat cleat
LE
E
SL
E
Technical DataCasting material : AISI316 - DIN 1.4408Production : S505 - Cleat - Cast S505H - Cleat - CastSurface treatment : "M.P. " (Mirror polished)
Field of applicationTrim line cleats are manufactured with highest precision in casting material to avoid any rust during sea application.Trim line cleats - heavy type are manufactured with highest precision in casting material to avoid any rust during sea application.
Field of applicationBlue water cleats are manufactured with highest precision in casting material to avoid any rust during sea application.Low flat cleats are manufactured with highest precision in casting material to avoid any rust during sea application.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S507 - Cleat - Cast S508 - Cleat - CastSurface treatment : "M.P. " (Mirror polished)
Low flat cleats are manufactured with highest precision in casting material to avoid any rustduring sea application.
Low flat cleat
S505, S505H
S507, S508
* For more information on symbols, refer to page 17.Piece per carton.120
Anchor, Cleats & Rod holdersBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SFG216016 L
(mm)
220
S(mm)
7
E(mm)
100
Ø D(mm)
50.8
B(mm)
95
SS304
4216-0160 4item no.
Material SFG216018 L
(mm)
234
S(mm)
6.7
E(mm)
90
Ø D(mm)
51
B(mm)
56
SS304
4216-0180 6
item no.
Material SFG216017 L
(mm)
200
S(mm)
6.6
E(mm)
130
Ø D(mm)
51
SS304
4216-0170 6item no.
Material SFG216019 L
(mm)
215
Ø D(mm)
51
SS304
4216-0190 9
L
D
L
E
D
L
D
E
SFG216017Flush mount rod holder
SFG216019Rail mount rod holder
SFG216016Removable rod holder
SFG216018Deck mount rod holder
B
BS
S
E
L
D
Wrench
S
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Production : SFG216016 - Holder - Pipe Body - Forged SFG216018 - Holder - Pipe Body - CastSurface treatment : "M.P. " (Mirror polished)
Field of applicationRemovable rod holders are designed for easy assembly to any boat deck type for fishing rods.Deck mount rod holders are designed for assembly on boat deck with easy 45 degrees angle adjustment knob for fishing rods.
Rod holder (deck mount)
SFG216016, SFG216018
Technical DataCasting material : AISI304 - DIN 1.4308Forging material : AISI304 - DIN 1.4301Production : SFG216017 - Holder - Pipe Body - Cast SFG216019 - Holder - Pipe Body - CastSurface treatment : "M.P. " (Mirror polished)
Field of applicationFlush mount rod holders are designed for assembly with existing hole on boat deck for fishing rods.Rail mount rod holders are designed for assembly on boat deck with rails for fishing rods.
SFG216017, SFG216019
SLIDE
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
121
Anchor, Cleats & Rod holders
L
S
L
EE
S
Technical DataCasting material : AISI316 - DIN 1.4408Production : S9222R-3” - Hinge - Cast S9222R-3.5” - Hinge - Cast S9222R-4” - Hinge - CastSurface treatment : "M.P. " (Mirror polished)
B
L
E
LE
B
L
S
Technical DataCasting material : AISI316 - DIN 1.4408Production : S9224 - Hinge - Cast S9224WS - Hinge - Cast S9224WL - Hinge - CastSurface treatment : "M.P. " (Mirror polished)
Field of applicationStainless hinges are elegantly designed with precision casting for a special solid rust resistant look on boat decks.
Field of applicationStainless hinges are elegantly designed with precision casting for a special solid rust resistant look on boat decks.
S9222R-3" Hinge (type 3)
S9222R-3.5" Hinge (type 3.5)
S9224 Hinge
S9224WSAngle hinge
S9224WLLong angle hinge
S9222R-4"Hinge (type 4)
S9222R-3"S9222R-3.5"S9222R-4"
S9224, S9224WS, S9224WL
Hinge (type 3)
item no.
Material S9222R-3" L
(mm)
76
Ø S(mm)
5.5
E(mm)
38
SIZE(inch)
3"
SS316
6922-2003 250item no.
Material S9222R-3.5" L
(mm)
90.5
Ø S(mm)
5.5
E(mm)
38
SIZE(inch)
3.5"
SS316
6922-2003 250item no.
Material S9222R-4" L
(mm)
105
Ø S(mm)
5.5
E(mm)
38
SIZE(inch)
4"
SS316
6922-2004 200
item no.
Material S9224 L
(mm)
38
Ø S(mm)
5.5
E(mm)
38
SIZE(mm)
38
SS316
6922-4038 350item no.
Material S9224WS L
(mm)
38
Ø S(mm)
5.5
E(mm)
38
B(mm)
9.5
SIZE(mm)
38
SS316
6922-4138 350item no.
Material S9224WL L
(mm)
38
Ø S(mm)
5.5
E(mm)
38
B(mm)
19
SIZE(mm)
38
SS316
6922-4380 350
* For more information on symbols, refer to page 17.Piece per carton.122
Hinges & Deck mountsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S9223 L
(mm)
57.071.5
Ø S(mm)
5.55.5
B(mm)
1919
SIZE(mm)
5771
SS316
6922-30576922-3071
200250
item no.
Material S9223WS L
(mm)
57.071.5
Ø S(mm)
5.55.5
B(mm)
1919
SIZE(mm)
5771
SS316
6922-31576922-3171
300300
item no.
Material SF8340 L
(mm)
314661
Ø S(mm)
4.25.36.3
E(mm)
121315
SIZE(mm)
3*31*123*46*133*61*15
SS304
4834-00014834-00024834-0003
1,8001,400
500item no.
Material SF8341 E1
(mm)
12.517.525.0
L(mm)
415680
E(mm)
253550
SIZE(mm)
3*41*253*56*354*80*50
SS304
4834-10014834-10024834-1003
800400150
L
B
LS
Technical DataCasting material : AISI316 - DIN 1.4408Production : S9223 - Angle - Stamped S9223WS - Angle - StampedSurface treatment : "M.P. " (Mirror polished)
Field of applicationStainless hinges are elegantly designed with precision casting for a special solid rust resistant look on boat decks.
S9223Hinge
S9223WS Angle hinge
E
S L
E
E1L
SF8340Light angle
SF8341Heavy angle
Field of applicationLight angles and Heavy angles are designed for easy assembly onto two angled panels for maintainingthe 90 degrees angle function. The heavy type profile provides extra support for the angled function.
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : SF8340 - Angle - Stamped SF8341 - Angle - StampedSurface treatment : "E.P. " (Electro polished)
SF8340, SF8341
S9223, S9223WS
OversizeLight Type
25.0 8050 150
Aft cabin
4834-10030 degrees angle function. The heavy typee provides extra support for the angled function.
Hinge
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
123
Hinges & Deck mounts
item no.
Material S9225/HP L
(mm)
160
Ø S(mm)
5.5
C(mm)
27
A(mm)
80
SIZE(mm)
4
SS316
6922-5274 200item no.
Material S9226/HP L
(mm)
197
Ø S(mm)
6
C(mm)
98
A(mm)
146.5
SIZE(mm)
5
SS316
6922-6985 100
item no.
Material S9227/HP L
(mm)
64
Ø S(mm)
6.3
B(mm)
64
A(mm)
32
SIZE(mm)
4
SS316
6922-7644 250item no.
Material S9228/HP L
(mm)
81
Ø S(mm)
6.3
B(mm)
64
A(mm)
31.5
SIZE(mm)
4
SS316
6922-8644 200
item no.
Material S322C L
(mm)
48
Ø S(mm)
5
B(mm)
4.5
A(mm)
12.5
SIZE(mm)
5
SS316
6322-0548 2,000
S9225/HP, S9226/HP
S9225/HPStainless steel hinge (type L)
S9226/HPStainless steel hinge (type T)
L
A
B
AL
C
C
B
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "M.P. " (Mirror polished)
Field of applicationStainless steel hinges are elegantly designed for marine applications where a special corrosionresistance of the boat deck is required.
SS
S9227/HP, S9228/HP
S9227/HPStainless steel hinge (type O)
S9228/HPStainless steel hinge (type U)
B
C
L
A
Field of applicationStainless steel hinges are elegantly designed for marine applications where a special corrosionresistance of the boat deck is required.
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "M.P. " (Mirror polished)
S
Field of applicationWire eye straps-heavy type are elegantly designed for marine applications where a special corrosionresistance of the boat deck is required.
Technical DataCasting material : AISI316 - DIN 1.4408Surface treatment : "E.P." (Electro polished)
S322C
S322CWire eye strap-heavy type
AL
B
S
C
B
L
A
* For more information on symbols, refer to page 17.Piece per carton.124
Hinges & Deck mountsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SF322 L
(mm)
4250606467
Ø S(mm)
3.654.255.006.005.00
Strap
StampedStampedStampedStamped
Cast
H(mm)
1418222426
E(mm)
7.58.5
10.513.515.0
SIZE(mm)
4568
10
SS304
4322-00044322-00054322-00064322-00084322-0010
5,0002,0001,200
900600
item no.
Material SF323 L
(mm)
424548
Ø S(mm)
4.24.24.2
E(mm)
111111
SIZE(mm)
101316
SS316
6323-00106323-00136323-0016
3,5003,0002,000
item no.
Material SF324 L
(mm)
666972
Ø S(mm)
4.24.24.2
E(mm)
111111
SIZE(mm)
101316
SS316
6324-00106324-00136324-0016
1,6001,6001,400
item no.
Material S9210 L
(mm)
81105
Ø S(mm)
44
E(mm)
3838
B(mm)
2424
SIZE(inch)
3"4"
SS316
6921-00136921-0004
150125
item no.
Material S9211 L
(mm)
76
Ø S(mm)
5
E(mm)
38
B(mm)
22
SIZE(inch)
3"
SS316
6921-1303 250
L
B
E
B
E
L
Field of applicationDoor hooks and Cover latches are designed for anapplication where a simple closing of latch is required.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S9210 - Body - Cast S9211 - Body - CastSurface treatment : "M.P. " (Mirror polished)
S9210 Door hook
S9211Cover latch
L
E
S
SE
E
SF322Wire eye strap
SF323Eye strap - two hole type
SF324Eye strap - four hole type
Field of applicationEye straps are designed for easy assembly onto a flat panel. Eye strap are used for attachment of different assembled fittings.
Technical DataCasting material : AISI304 - DIN 1.4308Stamping material : AISI304 - DIN 1.4301Production : SF322 - Strap - See chart : SF323 - Strap - Stamped : SF324 - Strap - StampedSurface treatment : "E.P. " (Electro polished)
H
SF322, SF323, SF324
S9210, S9211
Material
item no.
Material
Field of applicationEye straps are designed for easy assembly ontoa flat panel. Eye strap are used for attachment of different assembled fittings.
Wire eye strap
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
125
Hinges & Deck mounts
item no.
Material S5373 L
(mm)
2121
Ø S(mm)
3.73.7
E(mm)
2727
B(mm)
1616
SIZE(mm)
1919
SS316
6537-3019 (E.P.)6537-3119(M.P.)
1,2001,200
item no.
Material S391 L
(mm)
73
Ø S(mm)
5.2
E(mm)
59.5
Ø C(mm)
26
SIZE(inch)
1"
SS316
6391-0100 70item no.
Material S392 L
(mm)
73
Ø S(mm)
5.2
H(mm)
59.5
Ø C(mm)
26
SIZE(inch)
1"
SS316
6392-0001 70item no.
Material S393 L
(mm)
73
Ø S(mm)
6.4
H(mm)
35
Ø C(mm)
26
SIZE(inch)
1"
SS316
6393-0001 175
item no.
Material S5341 L
(mm)
1818
Ø S(mm)
4.64.6
E(mm)
3030
B(mm)
1818
SIZE(mm)
99
SS316
6534-1009(E.P.)6534-1109(M.P.)
1,2001,200
item no.
Material S5359 L
(mm)
3740
Ø S(mm)
4.64.3
E(mm)
3434
B(mm)
1010
SIZE(mm)
510
SS316
6535-9005(E.P.)6535-9010(E.P.)
600500
LH
H
S
L
C
C
H
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S391 - Cap - Cast S392 - Cap - Cast S393 - Cap- CastSurface treatment : "M.P. " (Mirror polished)
L
B
L
EL
B
Field of applicationAwning hooks and Fender hooks are designed for easy screw assembly onto boat deck for extra support to existing loose fittings.Spring fender hooks with spring lever are designed for easy screw assembly onto boat deck for extra support to existing loose fittings.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S5373 - Hook - Cast S5341 - Hook - Cast S5359 - Hook- CastSurface treatment : "M.P. " (Mirror polished)/ "E.P. " (Electro polished)
S5373, S5341, S5359
SS
73 6.43526 175
S5359Spring fender hook
S391Rail fitting (top side cap)
S392Rail fitting (central cap)
S393Rail fitting (deck cap)
Allen key
S391, S392, S393
S5373Awning hook
S5341Fender hook
6393-00
Rail fitting (deck cap)
* For more information on symbols, refer to page 17.Piece per carton.126
Hinges & Deck mountsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S394 L
(mm)
52
Ø E(mm)
33
Ø C(mm)
26
SIZE(inch)
1"
SS316
6394-0001 150item no.
Material S395 L
(mm)
58
B(mm)
52
Ø C(mm)
26
SIZE(inch)
1"
SS316
6395-0001 80
item no.
Material S31601 L
(mm)
60555960555962
Ø S(mm)
7777778
Ø C(mm)
26.019.422.626.019.422.630.4
SIZE(inch)
1"3/4"7/8"
1"3/4"7/8"
1.3/16"
SS316
6316-0101(E.P.)6316-0102(E.P.)6316-0103(E.P.)6316-0104(M.P.)6316-0105(M.P.)6316-0106(M.P.)6316-0133(M.P.)
200250250200250200150
item no.
Material S31602 L
(mm)
33.025.228.033.025.228.036.0
Ø S(mm)
57.045.053.557.045.053.560.0
Ø C(mm)
26.019.422.726.019.422.730.4
SIZE(inch)
1"3/4"7/8"
1"3/4"7/8"
1.3/16"
SS316
6316-0201(E.P.)6316-0202(E.P.)6316-0203(E.P.)6316-0204(M.P.)6316-0205(M.P.)6316-0206(M.P.)6316-0233(M.P.)
200250250150250200150
C
L
E
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S394 - Cap - Cast S395 - Cap - CastSurface treatment : "M.P. " (Mirror polished)
L
C
EL
S
C
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S31601 - Cap - Cast S31602 - Cap - CastSurface treatment : "M.P. " (Mirror polished)/ "E.P. " (Electro polished)
S394, S395
S31601, S31602
Allen key
Allen key
C
LB
25.228.036.0
45.053.560.0
19.422.730.4
250200150
Rail fitting (top slide cap)
S394Rail fitting (elbow cap)
S395Rail fitting (T- cap)
S31601Rail fitting (top cap)
S31602Rail fitting (top slide cap)
6316-0205(M6316-0206(M6316-0233(M
Rail fitting (top cap)
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
127
Hinges & Deck mounts
item no.
Material S31614 L
(mm)
6363
T(mm)
66
B(mm)
77
Ø S(mm)
55
SIZE(inch)
7/8"7/8"
SS316
6316-1478 (E.P)6316-1403 (M.P)
250200
item no.
Material S31614A L
(mm)
6363
T(mm)
66
B(mm)
77
Ø S(mm)
55
SIZE(inch)
7/8"7/8"
SS316
6316-1401 (E.P)6316-1402 (M.P)
200200
item no.
Material S31606 L
(mm)
5656
T(mm)
4.754.75
B(mm)
88
Ø S(mm)
5.25.2
SIZE(inch)
7/8"7/8"
SS316
6316-0678 (E.P)6316-0614 (M.P)
350200
item no.
Material S31606A L
(mm)
5656
T(mm)
4.754.75
B(mm)
88
Ø S(mm)
5.25.2
SIZE(inch)
7/8"7/8"
SS316
6316-0687 (E.P)6316-0613 (M.P)
n/a200
item no.
Material S316061 L
(mm)
5656
T(mm)
4.54.5
B(mm)
88
Ø S(mm)
66
SIZE(inch)
7/8"7/8"
SS316
6316-0611(E.P)6316-0612 (M.P)
200200
item no.
Material S316061A L
(mm)
5656
T(mm)
4.54.5
B(mm)
88
Ø S(mm)
66
SIZE(inch)
7/8"7/8"
SS316
6316-0615 (E.P)6316-0617 (M.P)
200200
L
L L
T T
B B
S S
T
T
Technical DataCasting material : AISI316 - DIN 1.4408Production : S31614 - Hinge - Cast S31614A - Hinge - CastSurface treatment : "E.P. " (Electro polished)/ "M.P. " (Mirror polished)
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S31606 - Hinge - Cast S31606A - Hinge - CastSurface treatment : "E.P. " (Electro polished)/ "M.P. " (Mirror polished)
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
Technical DataCasting material : AISI316 - DIN 1.4408Production : S316061- Hinge - Cast S316061A - Hinge - CastSurface treatment : "E.P. " (Electro polished)/ "M.P. " (Mirror polished)
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
S31606Deck hinge(angle side mount)
S31614Deck hinge
S31614ADeck hinge (mount with removable pin)
S316061Deck hinge (rail mount)
S31606ADeck hinge(angle side mount with removable pin)
S316061ADeck hinge(rail mount with removable pin)
B
BL
S
T
B
L
S
TB
L
S
S
S31606, S31606A
S31614, S31614A
S316061, S316061A
Straight Removable pin
Angled AngledRemovable pin
Curve Curve Removable pin
* For more information on symbols, refer to page 17.Piece per carton.128
Hinges & Deck mountsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material S31612 L
(mm)
5050
E(mm)
22.522.5
B(mm)
1010
Ø S(mm)
5.45.4
SIZE(inch)
7/8"7/8"
SS316
6316-1278 (E.P)6316-1203 (M.P)
500250
item no.
Material S31612A L
(mm)
5050
E(mm)
22.522.5
B(mm)
1111
Ø S(mm)
5.45.4
SIZE(inch)
7/8"7/8"
SS316
6316-1201 (E.P)6316-1202 (M.P)
300250
item no.
Material SF8345 L
(mm)
47.062.5
E(mm)
1216
B(mm)
3650
A(mm)
4055
Ø S(mm)
3.54.5
SIZE(mm)
12*40*4716*55*62.5
SS316
6834-50016834-5002
800400
item no.
Material SF3272 L
(mm)
85
E(mm)
33
B(mm)
20
T(mm)
1.5
Ø S(mm)
4.2
SIZE(mm)
50
SS304
4327-2050 250
S
L
B
Technical DataCasting material : AISI316 - DIN 1.4408Production : S31612 - Hinge - Cast S31612A - Hinge - CastSurface treatment : "E.P. " (Electro polished) "M.P. " (Mirror polished)
Field of applicationStainless rail fittings are elegantly designed with precision casting for a special solid rust resistant look on boat canopy assemblies.
S31612Deck hinge (side mount)
E
L
B
S
S31612A Deck hinge (angled side mount)
ScrewdriverStraight Angled
S31612, S31612A
T
EL
B
S
L
B
SE
A
SF8345Vent
SF3272Tube strap
Field of applicationTube straps are specially designed for extra support to tubes on boat decks.
Technical DataForging material : AISI304 - DIN 1.4301Production : SF3272 - Strap - ForgedSurface treatment : "E.P. " (Electro polished)
SF3272
Field of applicationVents are specially designed to cover dust or water from the exhaust port of a motor boat.
Technical DataForging material : AISI316 - DIN 1.4401Production : SF8345 - Vent - ForgedSurface treatment : "E.P. " (Electro polished)
SF8345
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
129
Hinges & Deck mounts
D1 L1
D
M
L
D L
M
D1
D2
SFHA/01Fishing spear hook
SFHA/07Fishing spear hook
SFHA/03Fishing spear hook
SFHA/08Fishing spear hook
Technical DataForging material : AISI304 - DIN 1.4301Production : SFHA/01 - Hook - Forged SFHA/03 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFishing spear hooks are specially designed for assembly onto spears for fishing precision. All joints are TIG argon welded.
SFHA/01, SFHA/03
Technical DataForging material : AISI304 - DIN 1.4301Production : SFHA/07 - Hook - Forged SFHA/08 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFishing spear hooks are specially designed for assembly onto spears for fishing precision. All joints are TIG argon welded.
SFHA/07, SFHA/08
assembly onto spears for fishing precision. All joints yare TIG argon welded.
item no.
Material SFHA/01 L
(mm)
128
Ø D1(mm)
5
Ø D(mm)
10
L1(mm)
78
M(thread)
M6*1.0
SIZE(mm)
5*128
SS304
4000-0048 150
item no.
Material SFHA/07 L
(mm)
10
Ø D1(mm)
4
Ø D2(mm)
12
Ø D(mm)
10
M(thread)
M6*1.0
SIZE(mm)
4*110
SS304
4000-7110 350
item no.
Material SFHA/08 L
(mm)
150
Ø D1(mm)
5
Ø D2(mm)
15
Ø D(mm)
10
M(thread)
M6*1.0
SIZE(mm)
5*150
SS304
4000-8515 175
item no.
Material SFHA/03 L
(mm)
128
Ø D1(mm)
5
Ø D(mm)
10
L1(mm)
53
M(thread)
M6*1.0
SIZE(mm)
4.75*125
SS304
4000-3125 250
* For more information on symbols, refer to page 17.Piece per carton.130
Parts & ReplacementsBASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
item no.
Material SFHA/11 L
(mm)
280
Ø D1(mm)
15
Ø D2(mm)
5
Ø D(mm)
12.7
SIZE(mm)
12.7*28
SS304
4000-1112 60item no.
Material SFHA/12 L
(mm)
280
M(thread)
M6
Ø D1(mm)
15
Ø D2(mm)
5
Ø D(mm)
7.5
SIZE(mm)
7.5*24
SS304
4000-1224 60
item no.
Material SF3900 L
(mm)
14.524.335.365.140.6
Ø D1(mm)
5.006.356.356.358.00
Ø D2(mm)
1825252530
Ø D(mm)
1.52.02.02.02.5
SIZE(inch)
3/16"*1/2"1/4"*7/8"
1/4"*1 5/16"1/4"*2 1/2"
5/16"* 1 1/2"
SS316
6390-03166390-01476390-01416390-01426390-0516
4,0002,5002,3001,2001,200
SFHA/11, SFHA/12
SF3900
D1
L
L
D
M
Technical DataForging material : AISI304 - DIN 1.4301Production : SFHA/11 - Hook - Forged SFHA/12 - Hook - ForgedSurface treatment : "E.P. " (Electro polished)
Field of applicationFishing spear hooks are specially designed forassembly onto spears for fishing precision. All joints are TIG argon welded.
DSFHA/11Fishing spear hook
SFHA/12Fishing spear hook
D2
D2
D1
SF3900Bar spring
Technical DataForging material : AISI304 - DIN 1.4301 : AISI316 - DIN 1.4401(Bar: AISI316, Spring : AISI304, Ball : AISI304)Surface treatment : "E.P. " (Electro polished)
Field of applicationBar springs are designed for an easy locking and preventing the loosing of bail bullet on the pin.
L
D2
D
2.02.02.5
1/4 1 5/161/4"*2 1/2"
5/16"* 1 1/2"
6390 01416390-01426390-0516
o po )
n easy locking andbullet on the pin.
* For more information on symbols, refer to page 17.Piece per carton.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
131
Parts & replacements
I n d e x B y O r d e r n o .
132
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
1311-12111311-12121311-13161311-13171311-15031311-15101311-15121311-15131311-15141311-15151311-15161311-15171311-15201311-15341311-15381311-15581311-20011311-20111311-20121311-20131311-21131311-21141311-21151311-21161311-22131311-22141311-22151311-22161311-31611311-31621311-31631311-31641311-34011311-34021311-41021311-41121311-51021311-51031311-51121311-51221311-53111311-53131311-53141311-53341311-53361311-53381311-53561311-53581311-54101311-54111311-54121311-54131311-54141311-5416
Order no. Item no. Page Order no. Item no. PageBF311NHL-1/2"*110MMBF311NHR-1/2"*110MMBF311NHR-3/16"*39MMBF311NHL-3/16"*39MMBF311NHR-M8*66.5MMBF311NHR-M10*83.5MMBF311NHR-M12*110MMBF311NHL-1/4"UNC*50MMBF311NHR-1/4"UNC*50MMBF311NHL-5/16"UNC*66.5MMBF311NHR-5/16"UNC*66.5MMBF311NHR-M16*137.5MMBF311NHR-M20*147MMBF311NHR-3/4"UNC*147MMBF311NHR-3/8"UNC*83.5MMBF311NHR-5/8"UNC*137.5MMBF311EL-M20*147MMBF311ER-M20*147MMBF311HL-M20*147MMBF311HR-M20*147MMBF311EL-1/2"UNC*110MMBF311ER-1/2"UNC*110MMBF311HL-1/2"UNC*110MMBF311HR-1/2"UNC*110MMBF311EL-1/2"*110MMBF311ER-1/2"*110MMBF311HL-1/2"*110MMBF311HR-1/2"*110MMBF311EL-3/16"*39MMBF311ER-3/16"*39MMBF311HL-3/16"*39MMBF311HR-3/16"*39MMBF311HL-3/4"UNC*147MMBF311HR-3/4"UNC*147MMBF311EL-1/4"UNC*50MMBF311ER-1/4"UNC*50MMBF311NHR-1/2"UNC*110MMBF311NHL-1/2"UNC*110MMBF311ER-5/16"UNC*66.5MMBF311EL-5/16"UNC*66.5MMBF311NER-1/2"*110MMBF311NER-1/2"UNC*110MMBF311NER-1/4"UNC*50MMBF311NER-3/4"UNC*147MMBF311NER-3/16"*39MMBF311NER-3/8"UNC*83.5MMBF311NER-5/16"UNC*66.5MMBF311NER-5/8"UNC*137.5MMBF311NEL-M10*83.5MMBF311NEL-1/2"*110MMBF311NEL-M12*110MMBF311NEL-1/2"UNC*110MMBF311NEL-1/4"UNC*50MMBF311NEL-M16*137.5MM
1311-54201311-54341311-54361311-54381311-54451311-54561311-54581311-55041311-55051311-55061311-55071311-55081311-55091311-55111311-55121311-55141311-55161311-55181311-55211311-55341311-55351311-55371311-55381311-55431311-55451311-55561311-55571311-55581311-56041311-56051311-56061311-56071311-56091311-56101311-56121311-56131311-56161311-56171311-56201311-56341311-56381311-56401311-56411311-56451311-56461311-56551311-56571311-56581311-56651311-57081311-57091311-57121311-57161311-5738
BF311NEL-M20*147MMBF311NEL-3/4"UNC*147MMBF311NEL-3/16"*39MMBF311NEL-3/8"UNC*83.5MMBF311NEL-M4.5*27MMBF311NEL-5/16"UNC*66.5MMBF311NEL-5/8"UNC*137.5MMBF311EL-M5*39MMBF311NER-M5*39MMBF311EL-M6*50MMBF311NER-M6*50MMBF311NER-M8*66.5MMBF311EL-M10*83.5MMBF311NER-M10*83.5MMBF311EL-M12*110MMBF311NER-M12*110MMBF311EL-M16*137.5MMBF311NER-M16*137.5MMBF311NER-M20*147MMBF311EL-3/4"UNC*147MMBF311NHL-3/4"UNC*147MMBF311NHL-3/8"UNC*83.5MMBF311EL-3/8"UNC*83.5MMBF311NEL-M4*33.5MMBF311NER-M4.5*27MMBF311NEL-M6*50MMBF311NEL-M5*39MMBF311NEL-M8*66.5MMBF311NHL-M8*66.5MMBF311NHR-M5*39MMBF311ER-M6*50MMBF311NHR-M6*50MMBF311ER-M10*83.5MMBF311NHL-M10*83.5MMBF311ER-M12*110MMBF311NHL-M12*110MMBF311ER-M16*137.5MMBF311NHL-M16*137.5MMBF311NHL-M20*147MMBF311ER-3/4"UNC*147MMBF311ER-3/8"UNC*83.5MMBF311NHR-M4*33.5MMBF311NHL-M4*33.5MMBF311NHR-M4.5*27MMBF311NHL-M4.5*27MMBF311NHL-M5*39MMBF311NHL-5/8"UNC*137.5MMBF311ER-5/8"UNC*137.5MMBF311NHL-M6*50MMBF311HL-M8*66.5MMBF311HL-M10*83.5MMBF311HL-M12*110MMBF311HL-M16*137.5MMBF311HL-3/8"UNC*83.5MM
707070707070707070707070707070706767696967676969676769696767696969696767707067676868686868686868686868686868
686868686868686768676868676867686768686770706768686868687070677067706770677070676770707070707067706969696969
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
133
Order no. Item no. Page Order no. Item no. Page1311-57581311-58011311-58021311-58081311-58091311-58121311-58161311-58381361-00041361-00051361-00061361-00081361-01041361-01051361-01061361-01081931-10401931-10411931-10431931-10441931-11041931-11811931-12011931-12051931-12081931-12151931-12161931-12251931-12261931-12401931-14501931-14511931-14531931-14541931-15071931-15272100-10002101-10002102-10002102-21002104-10002112-10002120-10002121-10002122-10002123-10002124-10002142-10002160-10002162-10002200-10002202-10002240-10002242-1000
BF311EL-5/8"UNC*137.5MMBF311HL-5/8"UNC*137.5MMBF311HR-5/8"UNC*137.5MMBF311HR-M8*66.5MMBF311HR-M10*83.5MMBF311HR-M12*110MMBF311HR-M16*137.5MMBF311HR-3/8"UNC*83.5MMSF361R-4MMSF361R-5MMSF361R-6MMSF361R-8MMSF361RF-4MMSF361R-5MMSF361RF-6MMSF361R-8MMBF311ER-M4*33.5MMBF311EL-M4*33.5MMBF311HR-M4*33.5MMBF311HL-M4*33.5MMBF311HL-1/4"UNC*50MMBF311EL-M8*66.5MMBF311HR-1/4"UNC*50MMBF311ER-M5*39MMBF311ER-M8*66.5MMBF311HL-M5*39MMBF311HL-M6*50MMBF311HR-M5*39MMBF311HR-M6*50MMBF311NER-M4*33.5MMBF311ER-M4.5*27MMBF311EL-M4.5*27MMBF311HR-M4.5*27MMBF311HL-M4.5*27MMBF311HR-5/16"UNC*66.5MMBF311HL-5/16"UNC*66.5MMRTS-M10*1000MMLTS-M10*1000MMLTS-1/2"13UNC*1000MMLTS-1/2"20UNF*1000MMLTS-1/4"20UNC*1000MMRTS-W1/2"12*1000MMRTS-M12*1000MMRTS-1/2"20UNF*1000MMLTS-M12*1000MMRTS-1/2"13UNC*1000MMLTS-W1/2"12*1000MMRTS-1/4"20UNC*1000MMRTS-M16*1000MMLTS-M16*1000MMRTS-M20*1000MMLTS-M20*1000MMRTS-M24*1000MMLTS-M24*1000MM
2245-00052245-00602245-00802245-01002245-02052245-02062245-02082245-02102308-10002311-12112311-12122311-13162311-13172311-15042311-15102311-15122311-15132311-15142311-15152311-15162311-15172311-15202311-15342311-15382311-15582311-20012311-20112311-20122311-20132311-21132311-21142311-21162311-21172311-22132311-22142311-22152311-22162311-31612311-31622311-31632311-31642311-34012311-34022311-41022311-41132311-51022311-51032311-51132311-51222311-53112311-53132311-53142311-53342311-5336
SF2450-5MMSF2450-6MMSF2450-8MMSF2450-10MMSF2450X-5MMSF2450X-6MMSF2450X-8MMSF2450X-10MMRTS-W3/8"16*1000MMBF311NHL-1/2"*110MMBF311NHR-1/2"*110MMBF311NHR-3/16"*39MMBF311NHL-3/16"*39MMBF311NHR-M8*66.5MMBF311NHR-M10*83.5MMBF311NHR-M12*110MMBF311NHL-1/4"UNC*50MMBF311NHR-1/4"UNC*50MMBF311NHL-5/16"UNC*66.5MMBF311NHR-5/16"UNC*66.5MMBF311NHR-M16*137.5MMBF311NHR-M20*147MMBF311NHR-3/4"UNC*147MMBF311NHR-3/8"UNC*83.5MMBF311NHR-5/8"UNC*137.5MMBF311EL-M20*147MMBF311ER-M20*147MMBF311HL-M20*147MMBF311HR-M20*147MMBF311EL-1/2"UNC*110MMBF311ER-1/2"UNC*110MMBF311HR-1/2"UNC*110MMBF311HL-1/2"UNC*110MMBF311EL-1/2"*110MMBF311ER-1/2"*110MMBF311HL-1/2"*110MMBF311HR-1/2"*110MMBF311EL-3/16"*39MMBF311ER-3/16"*39MMBF311HL-3/16"*39MMBF311HR-3/16"*39MMBF311HL-3/4"UNC*147MMBF311HR-3/4"UNC*147MMBF311EL-1/4"UNC*50MMBF311ER-1/4"UNC*50MMBF311NHR-1/2"UNC*110MMBF311NHL-1/2"UNC*110MMBF311ER-5/16"UNC*66.5MMBF311EL-5/16"UNC*66.5MMBF311NER-1/2"*110MMBF311NER-1/2"UNC*110MMBF311NER-1/4"UNC*50MMBF311NER-3/4"UNC*147MMBF311NER-3/16"*39MM
676969696969696923232323232323236767696969676967676969696968676769696969757575757575757575757575757575757575
464646464646464675707070707070707070707070707070706767696967676969676769696767696969696767707067676868686868
I n d e x B y O r d e r n o .
134
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
2311-53382311-53562311-53582311-54102311-54112311-54122311-54132311-54142311-54162311-54202311-54342311-54362311-54382311-54452311-54562311-54582311-55012311-55022311-55032311-55092311-55122311-55132311-55142311-55162311-55182311-55212311-55332311-55352311-55372311-55382311-55432311-55452311-55542311-55552311-55592311-56012311-56022311-56032311-56082311-56102311-56112311-56132311-56152311-56172311-56202311-56332311-56382311-56402311-56412311-56452311-56462311-56562311-56572311-5659
Order no. Item no. Page Order no. Item no. PageBF311NER-3/8"UNC*83.5MMBF311NER-5/16"UNC*66.5MMBF311NER-5/8"UNC*137.5MMBF311NEL-M10*83.5MMBF311NEL-1/2"*110MMBF311NEL-M12*110MMBF311NEL-1/2"UNC*110MMBF311NEL-1/4"UNC*50MMBF311NEL-M16*137.5MMBF311NEL-M20*147MMBF311NEL-3/4"UNC*147MMBF311NEL-3/16"*39MMBF311NEL-3/8"UNC*83.5MMBF311NEL-M4.5*27MMBF311NEL-5/16"UNC*66.5MMBF311NEL-5/8"UNC*137.5MMBF311NER-M6*50MMBF311EL-M6*50MMBF311EL-M5*39MMBF311EL-M10*83.5MMBF311EL-M12*110MMBF311NER-M10*83.5MMBF311NER-M12*110MMBF311EL-M16*137.5MMBF311NER-M16*137.5MMBF311NER-M20*147MMBF311EL-3/4"UNC*147MMBF311NHL-3/4"UNC*147MMBF311NHL-3/8"UNC*83.5MMBF311EL-3/8"UNC*83.5MMBF311NEL-M4*33.5MMBF311NER-M4.5*27MMBF311NEL-M8*66.5MMBF311NEL-M5*39MMBF311NEL-M6*50MMBF311ER-M10*83.5MMBF311NHR-M6*50MMBF311NHR-M5*39MMBF311ER-M6*50MMBF311NHL-M10*83.5MMBF311ER-M12*110MMBF311NHL-M12*110MMBF311ER-M16*137.5MMBF311NHL-M16*137.5MMBF311NHL-M20*147MMBF311ER-3/4"UNC*147MMBF311ER-3/8"UNC*83.5MMBF311NHR-M4*33.5MMBF311NHL-M4*33.5MMBF311NHR-M4.5*27MMBF311NHL-M4.5*27MMBF311NHL-M5*39MMBF311NHL-5/8"UNC*137.5MMBF311ER-5/8"UNC*137.5MM
2311-56652311-57042311-57082311-57092311-57122311-57162311-57382311-57592311-58012311-58022311-58052311-58092311-58122311-58162311-58382311-59082312-09222312-09252312-10682312-10722312-10732312-10742312-14612318-10002318-21102318-21122318-21222318-21272318-21752318-21802318-24452318-25552318-25602318-26402318-26452318-26502318-26552318-26602318-26802318-28102318-28602318-28752318-28802319-21082319-21102319-24452319-26552319-26612319-28102319-28602319-28802360-04042360-04052360-0406
BF311NHL-M6*50MMBF311NHL-M8*66.5MMBF311HL-M8*66.5MMBF311HL-M10*83.5MMBF311HL-M12*110MMBF311HL-M16*137.5MMBF311HL-3/8"UNC*83.5MMBF311EL-5/8"UNC*137.5MMBF311HL-5/8"UNC*137.5MMBF311HR-5/8"UNC*137.5MMBF311HR-M8*66.5MMBF311HR-M10*83.5MMBF311HR-M12*110MMBF311HR-M16*137.5MMBF311HR-3/8"UNC*83.5MMBF311NER-M8*66.5MMSF312PBD-M22*T4.0MM*270MMSF312PBD-M20*T3.5MM*210MMSF3121P-2.0MM*86MM*M5SF3121P-7MM*M12SF3121P-8MM*190MM*M14SF3121P-10.0MM*224MM*M16SF3121P-16MM*192MM*M24*610MMLTS-W3/8"16*1000MMSF3182-10MM*100MMSF3182-10MM*120MMSF3182-12MM*120MMSF3182-12MM*100MMSF3182-10MM*75MMSF3182-10MM*80MMSF3182-4MM*45MMSF3182-5MM*55MMSF3182-5MM*60MMSF3182-6MM*40MMSF3182-6MM*45MMSF3182-6MM*50MMSF3182-6MM*55MMSF3182-6MM*60MMSF3182-6MM*80MMSF3182-8MM*100MMSF3182-8MM*60MMSF3182-8MM*75MMSF3182-8MM*80MMSF3192-10MM*80MMSF3192-10MM*100MMSF3192-4MM*45MMSF3192-6MM*55MMSF3192-6MM*60MMSF3192-8MM*100MMSF3192-8MM*60MMSF3192-8MM*80MMSF360CP-4MMSF360CP-5MMSF360CP-6MM
686868686868686868686868686868686867676767686867686867707067686868686867707067706770677070676770707070707067
707069696969696769696969696969686565585858585875939393939393939393939393939393939393938181818181818181202020
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
135
Order no. Item no. Page Order no. Item no. Page2360-04082360-04102360-04122360-04162360-10082360-10102360-10122360-10162360-40082360-40102360-40122360-40162360-50052360-50062360-50082360-50102360-50122360-63202360-63222370-04042370-04052370-04062370-04082370-04102370-04122370-04132370-04162370-10082370-10102370-10122370-10132370-10162370-20082370-20102370-20122370-20132370-20162444-05252444-05302444-05402444-05502444-05602444-06252444-06352444-06402444-06452444-06502444-06602444-06702444-06752444-06802444-08102444-08252444-0830
SF360CP-8MMSF360CP-10MMSF360CP-12MMSF360CP-16MMSF360B-8MMSF360B-10MMSF360B-12MMSF360B-16MMSF360C-8MMSF360C-10MMSF360C-12MMSF360C-16MMSF360LKF-5MMSF360LKF-6MMSF360LKF-8MMSF360LKF-10MMSF360LKF-12MMSFP3606/BLUE-32MM*100MMSFP3606/WHITE-32MM*100MMSF370CP-4MMSF370CP-5MMSF370CP-6MMSF370CP-8MMSF370CP-10MMSF370CP-12MMSF370CP-13MMSF370CP-16MMSF370B-8MMSF370B-10MMSF370B-12MMSF370B-13MMSF370B-16MMSF370C-8MMSF370C-10MMSF370C-12MMSF370C-13MMSF370C-16MMSFDIN444-M6*25MMSFDIN444-M5*30MMSFDIN444-M5*40MMSFDIN444-M5*50MMSFDIN444-M5*60MMSFDIN444FT-M6*25MMSFDIN444-M6*30MMSFDIN444-M6*40MMSFDIN444-M6*45MMSFDIN444-M6*50MMSFDIN444-M6*60MMSFDIN444-M6*70MMSFDIN444-M6*75MMSFDIN444-M6*80MMSFDIN444-M8*100MMSFDIN444-M8*25MMSFDIN444-M8*30MM
2444-08352444-08452444-08502444-08602444-08652444-08702444-08752444-08802444-10102444-10402444-10452444-10502444-10602444-10652444-10702444-10752444-10802444-10902444-12102444-12112444-12122444-12132444-12142444-12152444-12172444-12502444-12552444-12602444-12652444-12702444-12752444-12802444-12902444-16102444-16112444-16122444-16132444-16142444-16152444-16162444-16602444-16702444-16802444-16902444-20102444-20112444-20122444-20132444-20142444-20152444-20162444-20182444-20202444-2070
SFDIN444-M8*35MMSFDIN444-M8*45MMSFDIN444-M8*50MMSFDIN444-M8*60MMSFDIN444-M8*65MMSFDIN444-M8*70MMSFDIN444-M8*75MMSFDIN444-M8*80MMSFDIN444-M10*100MMSFDIN444-M10*40MMSFDIN444-M10*45MMSFDIN444-M10*50MMSFDIN444-M10*60MMSFDIN444-M10*65MMSFDIN444-M10*70MMSFDIN444-M10*75MMSFDIN444-M10*80MMSFDIN444-M10*90MMSFDIN444-M12*100MMSFDIN444-M12*110MMSFDIN444-M12*120MMSFDIN444-M12*130MMSFDIN444-M12*140MMSFDIN444-M12*150MMSFDIN444-M12*160MMSFDIN444-M12*50MMSFDIN444-M12*55MMSFDIN444-M12*60MMSFDIN444-M12*65MMSFDIN444-M12*70MMSFDIN444-M12*75MMSFDIN444-M12*80MMSFDIN444-M12*90MMSFDIN444-M16*100MMSFDIN444-M16*110MMSFDIN444-M16*120MMSFDIN444-M16*130MMSFDIN444-M16*140MMSFDIN444-M16*150MMSFDIN444-M16*160MMSFDIN444-M16*60MMSFDIN444-M16*70MMSFDIN444-M16*80MMSFDIN444-M16*90MMSFDIN444-M20*100MMSFDIN444-M20*110MMSFDIN444-M20*120MMSFDIN444-M20*130MMSFDIN444-M20*140MMSFDIN444-M20*150MMSFDIN444-M20*160MMSFDIN444-M20*180MMSFDIN444-M20*29MMSFDIN444-M20*70MM
202020202121212121212121202020202030302424242424242424252525252525252525259595959595979595959595959595959595
959595959595959595959595959595959595959595959595959595959595959595969696969696969696969696969696969696969696
I n d e x B y O r d e r n o .
136
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
2444-20752444-20802444-20902444-21002444-21102444-21112444-21122444-21142444-21202444-21402444-21452444-21502444-21602444-21612444-21702444-21752444-21802444-21812444-21902444-22502444-24102444-24112444-24122444-24132444-24142444-24152444-24162444-24202444-24802444-24902444-25302444-25402444-25502444-25602444-26122444-26352444-26402444-26452444-26502444-26602444-26702444-26752444-26802444-28102444-28122444-28302444-28352444-28402444-28502444-28602444-28652444-28702444-28752444-2880
Order no. Item no. Page Order no. Item no. PageSFDIN444-M20*75MMSFDIN444-M20*80MMSFDIN444-M20*90MMSFDIN444FT-M10*100MMSFDIN444-1/2"*100MMSFDIN444FT-M10*110MMSFDIN444-1/2"*120MMSFDIN444-1/2"*140MMSFDIN444FT-M10*120MMSFDIN444FT-M10*40MMSFDIN444FT-M10*45MMSFDIN444FT-M10*50MMSFDIN444FT-M10*60MMSFDIN444-1/2"*60MMSFDIN444FT-M10*70MMSFDIN444FT-M10*75MMSFDIN444FT-M10*80MMSFDIN444-1/2"*80MMSFDIN444FT-M10*90MMSFDIN444FT-M12*50MMSFDIN444-M24*100MMSFDIN444-M24*110MMSFDIN444-M24*120MMSFDIN444-M24*130MMSFDIN444-M24*140MMSFDIN444-M24*150MMSFDIN444-M24*160MMSFDIN444-M24*29MMSFDIN444-M24*80MMSFDIN444-M24*90MMSFDIN444FT-M5*30MMSFDIN444FT-M5*40MMSFDIN444FT-M5*50MMSFDIN444FT-M5*60MMSFDIN444FT-M6*19MMSFDIN444FT-M6*35MMSFDIN444FT-M6*40MMSFDIN444FT-M6*45MMSFDIN444FT-M6*50MMSFDIN444FT-M6*60MMSFDIN444FT-M6*70MMSFDIN444FT-M6*75MMSFDIN444FT-M6*80MMSFDIN444FT-M8*100MMSFDIN444FT-M8*120MMSFDIN444FT-M8*30MMSFDIN444FT-M8*35MMSFDIN444FT-M8*40MMSFDIN444FT-M8*50MMSFDIN444FT-M8*60MMSFDIN444FT-M8*65MMSFDIN444FT-M8*70MMSFDIN444FT-M8*75MMSFDIN444FT-M8*80MM
2444-34102444-34122444-34142444-34602444-34802444-38102444-38402444-38602444-38802444-41802444-56102444-56202444-56402444-56602444-56802444-58102444-58122444-58142444-58602444-58802444-81202444-83902444-84042506-10002516-10002600-10002610-10002735-00042735-00052735-00062735-00082780-11702780-11712780-19932780-19942780-50032780-50042780-50052780-50062780-50072780-50082780-50102780-50122780-50142780-50162780-53142780-53162780-53192780-53202780-53222780-53242780-53252780-53262780-5328
SFDIN444-3/4"*100MMSFDIN444-3/4"*120MMSFDIN444-3/4"*140MMSFDIN444-3/4"*60MMSFDIN444-3/4"*80MMSFDIN444-3/8"*100MMSFDIN444-3/8"*40MMSFDIN444-3/8"*60MMSFDIN444-3/8"*80MMSFDIN444-M24*180MMSFDIN444-5/16"*100MMSFDIN444-5/16"*120MMSFDIN444-5/16"*40MMSFDIN444-5/16"*60MMSFDIN444-5/16"*80MMSFDIN444-5/8"*100MMSFDIN444-5/8"*120MMSFDIN444-5/8"*140MMSFDIN444-5/8"*60MMSFDIN444-5/8"*80MMSFDIN444-M8*120MMSFDIN444-3/8"*90MMSFDIN444-M8*40MMLTS-5/16"18UNC*1000MMRTS-5/16"18UNC*1000MMRTS-M6*1000MMLTS-M6*1000MMSF7350-4MMSF7350-5MMSF7350-6MMSF7350-8MMSF7801-7.0MM*70MM*M12*80MM*168MMSF7801-8.0MM*80MM*M14*90MM*190MMSF7801-16MM*192MM*M24*170MM*387MMSF7801L-16MM*192MM*M24*170MM*387MMSF7805-3MMSF7805-4MMSF7805-5MMSF7805-6MMSF7805-7MMSF7805-8MMSF7805-10MMSF7805-12MMSF7805-14MMSF7805-16MMSF7805/CH-14MMSF7805/CH-16MMSF7805/CH-19MMSF7805/CH-20MMSF7805/CH-22MMSF7805/CH-24MMSF7805/CH-25MMSF7805/CH-26MMSF7805/CH-28MM
969696979697969697979797979697979796979796969696969696969696979797979797979797979797979797979797979797979797
969696969696969696969696969696969696969695969575757575353535356262626272727272727272727272646464646464646464
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
137
Order no. Item no. Page Order no. Item no. Page2780-53302780-53322780-53342780-53362800-10002810-10002931-10402931-10412931-10432931-10442931-11032931-11032931-11822931-12022931-12032931-12062931-12092931-12152931-12162931-12242931-12272931-14502931-14512931-14532931-14542931-15062931-15264000-00324000-00334000-00344000-00484000-11124000-12244000-31254000-61504000-62004000-62504000-63004000-71104000-85154006-01504006-02004006-02504006-03004009-01504009-02004009-03004013-03004013-04504013-06004013-10004018-00044018-00054018-0006
SF7805/CH-30MMSF7805/CH-32MMSF7805/CH-34MMSF7805/CH-36MMRTS-M8*1000MMLTS-M8*1000MMBF311ER-M4*33.5MMBF311EL-M4*33.5MMBF311HR-M4*33.5MMBF311HL-M4*33.5MMBF311HL-1/4"UNC*50MMBF311HR-1/4"UNC*50MMBF311EL-M8*66.5MMBF311NER-M5*39MMBF311NER-M4*33.5MMBF311ER-M5*39MMBF311ER-M8*66.5MMBF311HL-M5*39MMBF311HL-M6*50MMBF311HR-M5*39MMBF311HR-M6*50MMBF311ER-M4.5*27MMBF311EL-M4.5*27MMBF311HR-M4.5*27MMBF311HL-M4.5*27MMBF311HR-5/16"UNC*66.5MMBF311HL-5/16"UNC*66.5MMSFU-6MM*100MMSFU-6MM*150MMSFU-6MM*29MMSFHA/01-5MM*128MMSFHA/11-12.7MM*28MMSFHA/12-7.5MM*24MMSFHA/03-4.75MM*125MMSFJ-6MM*150MMSFJ-6MM*29MMSFJ-6MM*250MMSFJ-6MM*300MMSFHA/07-4MM*110MMSFHA/08-5MM*150MMSFH-6MM*150MMSFH-6MM*29MMSFH-6MM*250MMSFH-6MM*300MMSFH-9MM*150MMSFH-9MM*29MMSFH-9MM*300MMSFH-13MM*300MMSFH-13MM*450MMSFH-13MM*600MMSFH-13MM*1000MMS018-4MMS018-5MMS018-6MM
4018-00084018-00094018-00104018-00134018-00164018-00194018-00224018-00254018-10064018-10084018-10104018-10134018-10164018-10194018-20064018-20084018-20104018-20134018-20164018-20194018-28084100-00054100-00064100-00084100-00094100-00104100-00114100-00134100-00164100-00194100-00224100-00254126-10104126-10854210-11104210-11254210-11754210-12104210-12124210-12754210-13104210-21104210-21124210-21754210-22104210-22124210-22754211-11104211-11124211-11754211-20754211-21004211-21104211-2112
S018-8MMS018-9MMS018-10MMS018-13MMS018-16MMS018-19MMS018-22MMS018-25MMS018-6MMS018-8MMS018-10MMS018-13MMS018-16MMS018-19MMS0182-6MMS0182-8MMS0182-10MMS0182-13MMS0182-16MMS0182-19MMS0182-0840N-8MMS10-5MMS10-6MMS10-8MMS10-9MMS10-10MMS10-11MMS10-13MMS10-16MMS10-19MMS10-22MMS10-25MMSF126-10MM*100MMSF126-10MM*85MMS210-E1-100MMS210-E1-125MMS210-E1-75MMS210-E2-100MMS210-E2-125MMS210-E2-75MMS210-E3-100MMS210-H1-100MMS210-H1-125MMS210-H1-75MMS210-H2-100MMS210-H2-125MMS210-H2-75MMS211-E1-100MMS211-E1-125MMS211-E1-75MMS211-E2-75MMS211-E2-100MMS211-H1-100MMS211-H1-125MM
646464647575676769696969676868676769696969676769696969515151
130131131130
51515151
130130
5151515151515151515151313131
31313131313131313131313131313232323232323237373737373737373737378181
116116116116116116116116116116116116116117117117117117117117
I n d e x B y O r d e r n o .
138
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
4211-21254211-21754211-22104211-22124211-22754212-11104212-11504212-11754212-20504212-21004212-21754212-22754212-31754216-01604216-01704216-01804216-01904225-01024225-03044225-03084225-05084225-11044231-10194231-10284234-30064234-30084234-30104234-30124234-30164234-30204234-30224234-30254234-40024234-40034234-40044234-40064234-40084234-40104234-40124234-40144234-40164234-40194234-40224234-40254243-00064243-00084243-00104243-00124243-01064243-01084243-01104243-01124243-01214243-0122
Order no. Item no. Page Order no. Item no. PageS211-E2-125MMS211-H1-75MMS211-H2-100MMS211-H2-125MMS211-H2-75MMS212-E1-100MMS212E1-50MMS212-E1-75MMS212H-50MMS212-H1-100MMS212L-E1-75MMS212L-H175MMS212-H1-75MMSFG216016-SFG216017-SFG216018-SFG216019-S225-1/2"S225-3/4"S225-3/8"S225-5/8"S225-11/4"S2311-19MMS2311-28MMS2343-6MMS2343-8MMS2343-10MMS2343-12MMS2343-16MMS2343-20MMS2343-22MMS2343-25MMS2344-2MMS2344-3MMS2344-4MMS2344-6MMS2344-8MMS2344-10MMS2344-12MMS2344-14MMS2344-16MMS2344-19MMS2344-22MMS2344-25MMSF2430-6MMSF2430-8MMSF2430-10MMSF2430-12MMSF24301-6MMSF24301-8MMSF24301-10MMSF24301-12MMSF24301B-10MMSF24301B-12MM
4243-01264243-01284243-02064243-02084243-02104243-02114243-02124243-03064243-03084243-03104243-03124243-12064243-12084243-12124247-00504247-00704247-01004247-10504247-10654247-10904247-71064247-72064249-00004249-00014249-00024249-00034251-00004251-00014251-00024251-00034260-00024260-00034260-00044260-00054260-00064260-00084260-00104260-00124260-00144260-00164260-00194260-00224260-00254260-01504268-00024268-00034268-00044268-00054268-00064268-00084268-10854306-00064306-00084306-0010
SF24301B-6MMSF24301B-8MMSF24302-6MMSF24302-8MMSF24302-10MMSF24302B-10MMSF24302-12MMSF2430B-6MMSF2430B-8MMSF2430B-10MMSF2430B-12MMSF24302B-6MMSF24302B-8MMSF24302B-12MMS2470-50MMS2470-70MMS2470-100MMS2471-50MMS2471-65MMS2471-90MMS247H-6MMS247A-6MMS249-NO.0S249-NO.1S249-NO.2S249-NO.3S251-NO.0S251-NO.1S251-NO.2S251-NO.3S260-2MMS260-3MMS260-4MMS260-5MMS260-6MMS260-8MMS260-10MMS260-12MMS260-14MMS260-16MMS260-19MMS260-22MMS260-25MMS260-1.5MMSF268-2MMSF268-3MMSF268-4MMSF268-5MMSF268-6MMSF268-8MMSF268-10MMS306-6MMS306-8MMS306-10MM
117117117117117114113114113114115115114121121121121
42424242424343363636363636363636363636363636363636363645454545454545454545
454544444444444545454544444443434343434346464848484848484848343434343434343434343434343450505050505050909090
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
139
Order no. Item no. Page Order no. Item no. Page4306-00124306-00164306-00204306-00244306-01004306-01024306-01044306-01064306-03044306-03084306-05084306-05164306-06384306-06504306-08504306-10064306-10084306-10104306-10124306-10164306-10204306-10304306-10504306-11014306-11024306-11044306-12204306-12504306-13044306-13084306-15084306-15164306-16154306-16504306-20124306-20154306-20504306-20804306-21064306-22154306-24154306-24504306-30424306-38064306-41224306-43064306-51624306-58024306-80324306-85064306-87064307-06104307-06404307-0660
S306-12MMS306-16MMS306-20MMS306-24MMS306-1"S306-1/2"S306-1/4"S306-1"*6"S306-3/4"S306-3/8"S306-5/8"S306-5/16"S306-6*38MMS306-6*50MMS306-8*50MMS3061-6MMS3061-8MMS3061-10MMS3061-12MMS3061-16MMS3061-20MMS3061-30MMS306-10*50MMS3061-1"S3061-1/2"S3061-1/4"S3061-22MMS306-12*50MMS3061-3/4"S3061-3/8"S3061-5/8"S3061-5/16"S306-16*150MMS306-16*50MMS306-1/2"12*2"S306-20*150MMS306-20*50MMS306-20*80MMS306-1/2"*6"S306-22*150MMS306-24*150MMS306-24*50MMS306-3/4"10*2"S306-3/8"*6"S306-1/4"20*2"S306-3/4"*6"S306-5/16"18*2"S306-5/8"11*2"S306-3/8"16*2"S306-5/8"*6"S306-7/8"*6"S307-6*100MMS307-6*40MMS307-6*60MM
4307-06804307-08104307-08124307-08284307-08384307-08604307-08644307-08804307-10054307-10104307-10124307-10144307-10164307-10204307-10804307-12104307-12124307-12144307-12164307-12174307-12184307-12204307-12224307-12704307-16104307-16154307-16754307-20154307-21004307-21104307-21124307-21144307-21154307-21454307-21504307-21664307-21804307-24154307-40114307-41404307-41504307-41604307-41804307-50124307-56104307-56604307-56804307-83104307-83124307-83134307-83144307-83454307-83804308-0640
S307-6*80MMS307-8*100MMS307-8*120MMS307-8*28MMS307-8*38MMS307-8*60MMS307-8*64MMS307-8*80MMS307-10*50MMS307-10*100MMS307-10*120MMS307-10*140MMS307-10*160MMS307-10*29MMS307-10*80MMS307-12*100MMS307-12*120MMS307-12*140MMS307-12*160MMS307-12*165MMS307-12*180MMS307-12*29MMS307-12*220MMS307-12*170MMS307-16*100MMS307-16*150MMS307-16*75MMS307-20*150MMS307-12*150MMS307-1/2"*100MMS307-1/2"*120MMS307-1/2"*140MMS307-1/2"*150MMS307-1/2"*45MMS307-1/2"*50MMS307-1/2"*60MMS307-1/2"*80MMS307-24*150MMS307-1/4"*100MMS307-1/4"*40MMS307-1/4"*50MMS307-1/4"*60MMS307-1/4"*80MMS307-5/16"*120MMS307-5/16"*100MMS307-5/16"*60MMS307-5/16"*80MMS307-3/8"*100MMS307-3/8"*120MMS307-3/8"*125MMS307-3/8"*140MMS307-3/8"*45MMS307-3/8"*80MMSF308-6MM40MM
909090909090909090909090909090888888888888889088888888908888888890909090909090909090909090909090909090919191
919191919191919191919191919191919191919191919191919191919191919191919191919191919191919191919191919191919182
I n d e x B y O r d e r n o .
140
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
4311-00054311-00064311-00084311-00094311-00124311-00164311-00194311-00204311-10054311-10064311-10084311-10094311-10124311-10164311-10194311-10454311-11054311-11064311-11084311-11094311-11124311-11164311-11194311-22054311-22064311-22084311-22104311-22124311-22164311-33044311-33054311-33064311-33084311-33104311-33124311-33164311-33204311-44054311-44064311-44084311-44104311-44124311-44164311-44204313-30504313-30754313-31004313-44504314-00254314-00324314-00504314-01504314-03254314-0332
Order no. Item no. Page Order no. Item no. PageS311EE-5MMS311EE-6MMS311EE-8MMS311EE-9MMS311EE-12MMS311EE-16MMS311EE-19MMS311EE-20MMS311HE-5MMS311HE-6MMS311HE-8MMS311HE-9MMS311HE-12MMS311HE-16MMS311HE-19MMS311HE-4.5MMS311HH-5MMS311HH-6MMS311HH-8MMS311HH-9MMS311HH-12MMS311HH-16MMS311HH-19MMS311EE-5MMS311EE-6MMS311EE-8MMS311EE-10MMS311EE-12MMS311EE-16MMS311HE-4MMS311HE-5MMS311HE-6MMS311HE-8MMS311HE-10MMS311HE-12MMS311HE-16MMS311HE-20MMS311HH-5MMS311HH-6MMS311HH-8MMS311HH-10MMS311HH-12MMS311HH-16MMS311HH-20MMS313-E1-50MMS313-E1-75MMS313-E1-100MMS313NLE-50MMS314-25MMS314-32MMS314-50MMS314/H150MMS314NL-25MMS314NL-32MM
4314-03504314-04254314-04324314-04504314-06254314-06324314-06504314-10254314-10324314-10504314-11254314-11324314-11504314-12254314-12324314-12504314-13254314-13324314-13504314-14254314-14324314-14504314-15254314-15324314-15504315-00254315-00324315-00504315-01254315-01324315-01504315-02254315-02324315-02504315-03254315-03324315-03504315-10254315-10324315-10504315-11254315-11324315-11504315-12254315-12324315-12504315-13254315-13324315-13504315-14254315-14324315-14504315-15254315-1532
S314NL-50MMS314ANL-25MMS314ANL-32MMS314ANL-50MMS314A-25MMS314A-32MMS314A-50MMS3141-25MMS3141-32MMS3141-50MMS3141/A-25MMS3141/A-32MMS3141/A-50MMS3141/B-25MMS3141/B-32MMS3141/B-50MMS3141NL-25MMS3141NL-32MMS3141NL-50MMS3141NL/A-25MMS3141NL/A-32MMS3141NL/A-50MMS3141NL/B-25MMS3141NL/B-32MMS3141NL/B-50MMS315-25MMS315-32MMS315-50MMS315A-25MMS315A-32MMS315A-50MMS315ANL-25MMS315ANL-32MMS315ANL-50MMS315NL-25MMS315NL-32MMS315NL-50MMS3151-25MMS3151-32MMS3151-50MMS3151/A-25MMS3151/A-32MMS3151/A-50MMS3151/B-25MMS3151/B-32MMS3151/B-50MMS3151NL-25MMS3151NL-32MMS3151NL-50MMS3151NL/A-25MMS3151NL/A-32MMS3151NL/A-50MMS3151NL/B-25MMS3151NL/B-32MM
5252525252525252525252525252525252525252525252525252525252525252525252525252525252525252
115115115115110110110113110110
110110110110110110110111111111112112112112112112111111111112112112113113113111111111111111111111111111111111111111111111112112112112112112111111111112112112113113
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
141
Order no. Item no. Page Order no. Item no. Page4315-15504317-03104317-03154317-03204317-03254317-03304317-03354317-03404317-04204317-04254317-04304317-04354317-04404317-05204317-05254317-05304317-05354317-05404317-05454317-05504317-05604317-05654317-06254317-06304317-06354317-06404317-06454317-06504317-06554317-06604317-06804317-06904317-07404317-07454317-07504317-07554317-07604317-07654317-08104317-08304317-08354317-08404317-08454317-08504317-08554317-08604317-08654317-08704317-08754317-08804317-08904317-09304317-09504317-0960
S3151NL/B-50MMSF317-3MM*10MMSF317-3MM*15MMSF317-3MM*20MMSF317-3MM*25MMSF317-3MM*30MMSF317-3MM*35MMSF317-3MM*40MMSF317-4MM*20MMSF317-4MM*25MMSF317-4MM*30MMSF317-4MM*35MMSF317-4MM*40MMSF317-5MM*20MMSF317-5MM*25MMSF317-5MM*30MMSF317-5MM*35MMSF317-5MM*40MMSF317-5MM*45MMSF317-5MM*50MMSF317-5MM*60MMSF317-5MM*65MMSF317-6MM*25MMSF317-6MM*30MMSF317-6MM*35MMSF317-6MM*40MMSF317-6MM*45MMSF317-6MM*50MMSF317-6MM*55MMSF317-6MM*60MMSF317-6MM*80MMSF317-6MM*90MMSF317-7MM*40MMSF317-7MM*45MMSF317-7MM*50MMSF317-7MM*55MMSF317-7MM*60MMSF317-7MM*65MMSF317-8MM*100MMSF317-8MM*30MMSF317-8MM*35MMSF317-8MM*40MMSF317-8MM*45MMSF317-8MM*50MMSF317-8MM*55MMSF317-8MM*60MMSF317-8MM*65MMSF317-8MM*70MMSF317-8MM*75MMSF317-8MM*80MMSF317-8MM*90MMSF317-9MM*30MMSF317-9MM*50MMSF317-9MM*60MM
4317-09654317-09704317-09804317-09904317-10104317-10124317-10144317-10404317-10504317-10554317-10604317-10654317-10704317-10754317-10804317-10904317-12104317-12114317-12124317-12144317-12604317-12654317-12704317-12754317-12804317-12904317-13104317-13124317-13134317-13144317-13154317-13164317-13554317-13604317-13654317-13704317-13804317-13904318-00034318-00044318-00054318-00064318-00084319-00034319-00054319-00064319-00074319-00084319-00094319-00124319-01104319-01214319-01224319-0123
SF317-9MM*65MMSF317-9MM*70MMSF317-9MM*80MMSF317-9MM*90MMSF317-10MM*100MMSF317-10MM*120MMSF317-10MM*140MMSF317-10MM*40MMSF317-10MM*50MMSF317-10MM*55MMSF317-10MM*60MMSF317-10MM*65MMSF317-10MM*70MMSF317-10MM*75MMSF317-10MM*80MMSF317-10MM*90MMSF317-12MM*100MMSF317-12MM*110MMSF317-12MM*120MMSF317-12MM*140MMSF317-12MM*60MMSF317-12MM*65MMSF317-12MM*70MMSF317-12MM*75MMSF317-12MM*80MMSF317-12MM*90MMSF317-13MM*100MMSF317-13MM*120MMSF317-13MM*130MMSF317-13MM*140MMSF317-13MM*150MMSF317-13MM*160MMSF317-13MM*55MMSF317-13MM*60MMSF317-13MM*65MMSF317-13MM*70MMSF317-13MM*80MMSF317-13MM*90MMSF318-3MM*25MMSF318-4MM*30MMSF318-5MM*35MMSF318-6MM*40MMSF318-8MM*45MMSF319-3MMSF319-5MMSF319-6MMSF319-7MMSF319-8MMSF319-9MMSF319-12MMSF319-10MM*100MMSF319-12MM*120MMSF319-12MM*150MMSF319-12MM*180MM
1137676767676767676767676767676767676767676767676767676767676767676767676767676767676767676767676767676767676
767676777777777777777777777777777777777777777777777777777777777777777777777781818181818080808080808080808080
I n d e x B y O r d e r n o .
142
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
4319-01244319-06604319-08804319-11014319-11024319-11034319-11044319-11064319-11074319-11124319-11144319-11214319-11224319-11234319-11244319-11264319-11504319-11654319-12124319-12144319-13814319-14164319-15114319-15504319-16104319-16164319-16404319-16554319-16604319-16804319-18104319-18114319-18124319-18134319-18154319-18314319-18324319-18354319-18604319-18804319-18884319-21854319-61254319-91204319-91404320-00054320-00064320-00084320-10054320-10064320-10084320-20054320-20064320-2008
Order no. Item no. Page Order no. Item no. PageSF319-12MM*29MMSF319-6MM*60MMSF319-8MM*80MMSF3191-10MM*100MMSF3191-10MM*120MMSF3191-10MM*130MMSF3191-10MM*150MMSF3191-10MM*60MMSF3191-10MM*80MMSF3191-10MM*29MMSF3191-10MM*140MMSF3191-12MM*100MMSF3191-12MM*120MMSF3191-12MM*140MMSF3191-12MM*150MMSF3191-12MM*80MMSF3191-10MM*50MMSF3191-16*150MMSF3191-1/2"*120MMSF3191-1/2"*4"SF3191-3/8"*100MMSF3191-1/4"*60MMSF3191-5/16"*100MMSF3191-5MM*50MMSF3191-6MM*100MMSF3191-6MM*160MMSF3191-6MM*40MMSF3191-6MM*55MMSF3191-6MM*60MMSF3191-6MM*80MMSF3191-8MM*100MMSF3191-8MM*110MMSF3191-8MM*120MMSF3191-8MM*130MMSF3191-8MM*150MMSF3191-3/8"*31/8"SF3191-3/8"*33/16"SF3191-8MM*35MMSF3191-8MM*60MMSF3191-8MM*80MMSF3191-8MM*125MMSF3191-12MM*185MMSF3191-6MM*125MMSF319-9MM*120MMSF319-9MM*140MMSF320-5MMSF320-6MMSF320-8MMSF3201-5MMSF3201-6MMSF3201-8MMSF3202-5MMSF3202-6MMSF3202-8MM
4320-20094320-40054320-40064320-40084320-50054320-50064320-50084320-60054320-60064320-60084321-00054321-00064321-00084321-01804321-10054321-10064321-10084321-20054321-20064321-20084321-20094321-21054321-21064321-21084321-21094321-31124321-32144321-32314321-32384321-40054321-40064321-40084321-41054321-41064321-41084321-50054321-50064321-50084321-60054321-60064321-60084322-00044322-00054322-00064322-00084322-00104323-02004323-02404325-01104325-01504325-01544325-01554325-01604325-0164
SF3202-9MMSF3204-5MMSF3204-6MMSF3204-8MMSF3205-5MMSF3205-6MMSF3205-8MMSF3206-5MMSF3206-6MMSF3206-8MMSF321-5MMSF321-6MMSF321-8MMSF3250-10MM*80MMSF3211-5MMSF3211-6MMSF3211-8MMSF3212-5MMSF3212-6MMSF3212-8MMSF3212-9MMSF3212H-5MMSF3212H-6MMSF3212H-8MMSF3212H-9MMS3213-11/2"*21/2"S3213-21/4"*31/2"S3213-2"*31/8"S3213-23/8"*4"SF3214-5MMSF3214-6MMSF3214-8MMSF3214H-5MMSF3214H-6MMSF3214H-8MMSF3215-5MMSF3215-6MMSF3215-8MMSF3216-5MMSF3216-6MMSF3216-8MMSF322-4MMSF322-5MMSF322-6MMSF322-8MMSF322-10MMS3230-29MMS3230-240MMSF3250-10MM*100MMSF3250-10MM*50MMSF32501-5MM*45MMSF32501-5MM*50MMSF3250-10MM*60MMSF32501-6MM*45MM
808080929292929292929292929292929292929292929292929292929292929292929292929292929292928080868686858585848484
8483838382828286868686868678858585848484848484848485858585838383838383828282868686
125125125125125118118787879797879
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
143
Order no. Item no. Page Order no. Item no. Page4325-01654325-01704325-01844325-01854325-01904325-02654325-03154325-03204325-03254325-03304325-04204325-04254325-04304325-04354325-04404325-04504325-05254325-05304325-05354325-05404325-05454325-05504325-05604325-06254325-06304325-06354325-06404325-06454325-06504325-06554325-06604325-06704325-07504325-08454325-08504325-08554325-08604325-08654325-08704325-08754325-08804325-09604325-09704325-15454325-15504325-16434325-16454325-16504325-18454325-18504325-18604325-23354325-24204325-2530
SF32501-6MM*50MMSF3250-10MM*70MMSF32501-8MM*45MMSF32501-8MM*50MMSF3250-10MM*90MMSF3250-10MM*65MMSF3250-3MM*15MMSF3250-3MM*20MMSF3250-3MM*25MMSF3250-3MM*30MMSF3250-4MM*20MMSF3250-4MM*25MMSF3250-4MM*30MMSF3250-4MM*35MMSF3250-4MM*40MMSF3250-4MM*50MMSF3250-5MM*25MMSF3250-5MM*30MMSF3250-5MM*35MMSF3250-5MM*40MMSF3250-5MM*45MMSF3250-5MM*50MMSF3250-5MM*60MMSF3250-6MM*25MMSF3250-6MM*30MMSF3250-6MM*35MMSF3250-6MM*40MMSF3250-6MM*45MMSF3250-6MM*50MMSF3250-6MM*55MMSF3250-6MM*60MMSF3250-6MM*70MMSF3250-7MM*50MMSF3250-8MM*45MMSF3250-8MM*50MMSF3250-8MM*55MMSF3250-8MM*60MMSF3250-8MM*65MMSF3250-8MM*70MMSF3250-8MM*75MMSF3250-8MM*80MMSF3250-9MM*60MMSF3250-9MM*70MMSF3251-5MM*45MMSF3251-5MM*50MMSF3251-6MM*43MMSF3251-6MM*45MMSF3251-6MM*50MMSF3251-8MM*45MMSF3251-8MM*50MMSF3251-8MM*60MMSF3252-3MM*35MMSF3252-4MM*20MMSF3252-5MM*30MM
4325-25404325-25454325-26404325-26454325-26504325-27704325-28454325-28504327-20504331-35004360-00044360-00054360-00064360-00074360-00084360-00094360-04104360-04124360-04134360-04144360-04164360-04194360-04224360-04244360-04254360-04284360-04324360-10044360-10054360-10064360-10074360-10084360-10094360-10104360-10124360-10134360-10164360-10194360-10224360-10254360-20064360-20074360-40044360-40054360-40064360-40074360-40084360-40094360-40104360-40124360-40134360-40164360-40194360-4022
SF3252-5MM*40MMSF3252-5MM*45MMSF3252-6MM*40MMSF3252-6MM*45MMSF3252-6MM*50MMSF3252-7MM*70MMSF3252-8MM*45MMSF3252-8MM*50MMSF3272-50MMSFH-13MM*500MMS360-4MMS360-5MMS360-6MMS360-7MMS360-8MMS360-9MMS360CP-10MMS360CP-12MMS360CP-13MMS360CP-14MMS360CP-16MMS360CP-19MMS360CP-22MMS360CP-4MMS360CP-25MMS360CP-28MMS360CP-32MMS360B-4MMS360B-5MMS360B-6MMS360B-7MMS360B-8MMS360B-9MMS360B-10MMS360B-12MMS360B-13MMS360B-16MMS360B-19MMS360B-22MMS360B-25MMS360CP-6MMS360CP-7MMS360C-4MMS360C-5MMS360C-6MMS360C-7MMS360C-8MMS360C-9MMS360C-10MMS360C-12MMS360C-13MMS360C-16MMS360C-19MMS360C-22MM
797879797878787878787878787878787878787878787878787878787878787878787878787878787878787979797979797979797979
7979797979797979
129512020202020202020202020202020202020212121212121212121212121212020212121212121212121212121
I n d e x B y O r d e r n o .
144
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
4360-40254360-44054360-52084360-52094360-63214361-00044361-00054361-00064361-00084361-30054361-30064361-30884413-04604413-05804413-06904413-08104413-08804413-10134413-10904413-12154490-05204490-05254490-05304490-06504490-07474490-08654501-31024501-35084501-40014541-10074543-10064544-10904547-10114548-10144549-10164819-00194824-80254824-82254825-00254825-01254825-20254825-21254825-30254825-31254825-60254825-61254825-70254825-71254825-80254825-81254830-01024830-03044830-03084830-0508
Order no. Item no. Page Order no. Item no. PageS360C-25MMS360CP-5MMS360CP-8MMS360CP-9MMSF3606-32*100MMS361-4MMS361-5MMS361-6MMS361-8MMS361RF-5MMS361RF-6MMS361RF-8MMSF413-4MM*60MMSF413-5MM*80MMSF413-6MM*90MMSF413-8MM*100MMSF413-8MM*80MMSF413-10MM*130MMSF413-10MM*90MMSF413-12MM*150MMSF4900-5MM*20MMSF4900-5MM*25MMSF4900-5MM*30MMSF4900-6MM*50MMSF4900-7MM*47MMSF4900-8MM*65MMS5013-1/2"S5013-5/8"S5014-1"SF541-10MM*76MMSF543-10MM*65MMSF544-10MM*90MMSF547-10MM*115MMSF548-10MM*140MMSF549-10MM*165MMSF8190-19MMSF8248P-25MMSF8248-25MMSF8250-25MMSF8250P-25MMSF8252-25MMSF8252P-25MMSF8253-25MMSF8253P-25MMSF8256-25MMSF8256P-25MMSF8257-25MMSF8257P-25MMSF8258-25MMSF8258P-25MMS830-1/2"S830-3/4"S830-3/8"S830-5/8"
4834-00014834-00024834-00034834-10014834-10024834-10034840-01024867-10654867-11654867-20654867-21654875-00054875-00064875-00084875-00094875-00104875-00124875-04004878-00064878-00084880-60804880-61204880-61604880-62004880-62404940-05406018-00046018-00056018-00066018-00086018-00096018-00106018-00136018-00166018-00196018-00226018-00256018-10066018-10086018-10106018-10136018-10166018-10196018-11066018-11086018-11136018-11166018-11196018-13106018-20066018-20086018-20106018-20136018-2016
SF8340-3MM*31MM*12MMSF8340-3MM*46MM*13MMSF8340-3MM*61MM*15MMSF8341-3MM*41MM*25MMSF8341-3MM*56MM*35MMSF8341-4MM*80MM*50MMS840-1/2"(13MM)SF8671E-65MMSF8671H-65MMSF8672E-65MMSF8672H-65MMSF875-5MMSF875-6MMSF875-8MMSF875-9MMSF875-10MMSF875-12MMSF875-4MMSF878-6MMSF878-8MMSF880-6MM*80MMSF880-6MM*120MMSF880-6MM*160MMSF880-6MM*29MMSF880-6MM*240MMSF4900-5MM*40MMS018-4MMS018-5MMS018-6MMS018-8MMS018-9MMS018-10MMS018-13MMS018-16MMS018-19MMS018-22MMS018-25MMS018-6MMS018-8MMS018-10MMS018-13MMS018-16MMS018-19MMS0181I-6MMS0181I-8MMS0181I-13MMS0181I-16MMS0181I-19MMS0181I-10MMS0182-6MMS0182-8MMS0182-10MMS0182-13MMS0182-16MM
212020203023232323232323
101101101101101101101101
797979797979494949
101101101101101101108108108109109109109109109109109109109108108
48484848
123123123123123123
4811011011011050505050505050464650505050507931313131313131313131313131313131313131313131313232323232
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
145
Order no. Item no. Page Order no. Item no. Page6018-20196018-21066018-21086018-21106018-21136018-21166018-21196100-00056100-00066100-00086100-00096100-00106100-00116100-00136100-00166100-00196100-00226100-00256119-12356119-13056119-25356119-33056119-43056119-53056119-63056119-83056125-15036125-15736125-20036125-20736126-20456126-20746128-25066128-25766161-03126162-00046163-04346182-01156182-01366182-01786182-51156182-51366182-51786183-01156183-01366183-01786183-51156183-51366183-51786184-01156184-01366184-01786213-11106213-1125
S0182-19MMS0182I-6MMS0182I-8MMS0182I-10MMS0182I-13MMS0182I-16MMS0182I-19MMS10-5MMS10-6MMS10-8MMS10-9MMS10-10MMS10-11MMS10-13MMS10-16MMS10-19MMS10-22MMS10-25MMSWR/1*19-12.0MM*305MSWR/1*19-10.0MM*305MSWR/1*19-2.5MM*305MSWR/1*19-3.0MM*305MSWR/1*19-4.0MM*305MSWR/1*19-5.0MM*305MSWR/1*19-6.0MM*305MSWR/1*19-8.0MM*305MSAB/APL-M5*15MMSAB/T/APL-M5*15MMSAB/APL-M5*20MMSAB/T/APL-M5*20MMSAB/APL-M6*20MMSAB/T/APL-M6*20MMSAB/APL-M8*25MMSAB/T/APL-M8*25MMS161-31/2"S162-4"S163-43/4"SAH/APL-11MM*5MMSAH/APL-13MM*6MMSAH/APL-17MM*8.2MMSAH/APL-11MM*5MMSAH/APL-13MM*6MMSAH/APL-17MM*8.2MMSAH/APL-11MM*5MMSAH/APL-13MM*6MMSAH/APL-17MM*8.2MMSAH/APL-11MM*5MMSAH/APL-13MM*6MMSAH/APL-17MM*8.2MMSAH/APL-11MM*5MMSAH/APL-13MM*6MMSAH/APL-17MM*8.2MMS213-E1-100MMS213-E1-125MM
6213-11506213-11756225-01026225-03046225-03086225-05086225-11046225-13186231-10196231-10286231-31026232-41406234-00026234-00036234-00046234-00056234-00066234-00086234-00206234-00226234-00256234-10106234-10126234-10166234-10186234-90146243-00066243-00086243-00106243-00126243-01066243-01086243-01106243-01126243-01216243-01226243-01266243-01286243-02066243-02086243-02106243-02116243-02126243-03066243-03086243-03106243-03126243-10066243-10086243-10106243-10126243-10196243-11066243-1108
S213-E1-150MMS213-E1-75MMS225-1/2"S225-3/4"S225-3/8"S225-5/8"S225-11/4"S225SQ-1"*31/8"S2311-19MMS2311-28MMS231-31/2"S232-41/4"SF234U-2MMSF234U-3MMSF234U-4MMSF234U-5MMSF234U-6MMSF234U-8MMSF234U-20MMSF234U-22MMSF234U-25MMSF234U-10MMSF234U-12MMSF234U-16MMSF234U-18MMSF234U-14MMSF2430-6MMSF2430-8MMSF2430-10MMSF2430-12MMSF24301-6MMSF24301-8MMSF24301-10MMSF24301-12MMSF24301B-10MMSF24301B-12MMSF24301B-6MMSF24301B-8MMSF24302-6MMSF24302-8MMSF24302-10MMSF24302B-10MMSF24302-12MMSF2430B-6MMSF2430B-8MMSF2430B-10MMSF2430B-12MMSF2431-6MMSF2431-8MMSF2431-10MMSF2431-12MMS2432-19MMSF2431X-6MMSF2431X-8MM
3232323232323237373737373737373737373838383838383838
102102102102102102102102
424242
102102102102102102102102102102102102102102102117117
11711742424242424243434242363636363636363636363636363645454545454545454545454544444444444545454544444444424444
I n d e x B y O r d e r n o .
146
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6243-11106243-11126243-12066243-12086243-12126245-00046245-00076245-00096245-00116245-00126245-00136245-01006245-02046245-02076245-02096245-02116245-02126245-02136245-50006246-40526246-60666246-80966247-00326247-00506247-00706247-01006247-61126247-62166247-63246247-81706247-82886247-83136248-20016248-20216248-21016248-21246248-21346248-23046248-30006248-30016248-33226248-33336249-00006249-00016249-00026249-00036249-00096249-01096251-00006251-00016251-00026251-00036251-10016251-1114
Order no. Item no. Page Order no. Item no. PageSF2431X-10MMSF2431X-12MMSF24302B-6MMSF24302B-8MMSF24302B-12MMS2450-4MMS2450-7MMS2450-9MMS2450-11MMS2450-12MMS2450-13MMS2450-10MMS2450X-4MMS2450X-7MMS2450X-9MMS2450X-11MMS2450X-12MMS2450X-13MMS245-5"S2464-52MMS2466-66MMS2468-96MMS2470-32MMS2470-50MMS2470-70MMS2470-100MMS2476-12MMS2476-16MMS2476-22MMS2478-70MMS2478-87MMS2478-128MMS2482-1S2482-2S24821-1S24821-2S24821-S2482-3S2483-0S2483-1S2483-2S2483-3S249-NO.0S249-NO.1S249-NO.2S249-NO.3S2490-9MMS2490X-9MMS251-NO.0S251-NO.1S251-NO.2S251-NO.3S2511-1"S2511-11/4"
6260-00026260-00036260-00046260-00056260-00066260-00086260-00106260-00126260-00146260-00166260-00196260-00226260-00256260-01506261-00026261-00036261-00046261-00056261-00066261-00086261-00106261-00136261-00166261-00196261-00226261-00256261-00326268-00086271-01186271-12586271-14566271-19736271-34786271-36146271-38766271-56386271-58346271-76126271-78016271-80016271-81026271-81186271-83046271-83086271-85086271-85166271-87086271-87166283-10066283-10086283-10126283-10166283-10616283-1131
S260-2MMS260-3MMS260-4MMS260-5MMS260-6MMS260-8MMS260-10MMS260-12MMS260-14MMS260-16MMS260-19MMS260-22MMS260-25MMS260-1.5MMS261-2MMS261-3MMS261-4MMS261-5MMS261-6MMS261-8MMS261-10MMS261-13MMS261-16MMS261-19MMS261-22MMS261-25MMS261-32MMSF268-8MMS2711-1"BODY*11/8"PINS2711-1/2"BODY*5/8"PINS2711-1/4"BODY*5/16"PINS2711BB-3/16"BODY*1/4"PINS2711-3/4"BODY*7/8"PINS2711-3/16"BODY*1/4"PINS2711-3/8"BODY*7/16"PINS2711-5/16"BODY*3/8"PINS2711-5/8"BODY*3/4"PINS2711-7/16"BODY*1/2"PINS2711-7/8"BODY*1"PINS2711BB-7/8"BODY*1"PINS2711BB-7/16"BODY*1/2"PINS2711BB-1"BODY*11/8"PINS2711BB-5/8"BODY*3/4"PINS2711BB-5/16"BODY*3/8"PINS2711BB-1/2"BODY*5/8"PINS2711BB-1/4"BODY*5/16"PINS2711BB-3/4"BODY*7/8"PINS2711BB-3/8"BODY*7/16"PINS2831-6MM(3")S2831-8MM(4")S2831-12MM(6")S2831-10I6S2831-06I6S2831I3-1/8"*1/4"
44444444444646464646464646464646464642
105105105
43434343
104104104104104104104104104104104104104104104104
484848484747484848484141
343434343434343434343434343434343434343434343434343434502222222222222222222222222222222222222222
106106106106106106
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
147
Order no. Item no. Page Order no. Item no. Page6283-11356283-11416283-12166283-13036283-14136283-14146283-15146283-15616283-15626283-16136283-16146283-18146283-18166283-31046283-31426283-31436301-04056301-06006301-08006305-01086305-01106305-01126305-01166305-01206305-01226306-00066306-00086306-00106306-00126306-00166306-00206306-00246306-01006306-01026306-01046306-01066306-03046306-03086306-05086306-05166306-06386306-06506306-08506306-10066306-10086306-10106306-10126306-10166306-10206306-10306306-10506306-11016306-11026306-1104
S2831I3-5/32"*1/4"S2831-3"S2831-12I6S2831-03I3S2831-04I3S2831-04I4S2831-05I4S2831-4"S2831-4"S2831-06I3S2831-06I4S2831-08I4S2831-08I6S2831-3"S2831-3"S2831-3"S301-4.5"S301-6"S301-8"S31501-8MMS31501-10MMS31501-12MMS31501-16MMS31501-20MMS31501-22MMS306-6MMS306-8MMS306-10MMS306-12MMS306-16MMS306-20MMS306-24MMS306-1"S306-1/2"S306-1/4"S306-1"*6"S306-3/4"S306-3/8"S306-5/8"S306-5/16"S306-6*38MMS306-6*50MMS306-8*50MMS3061-6MMS3061-8MMS3061-10MMS3061-12MMS3061-16MMS3061-20MMS3061-30MMS306-10*50MMS3061-1"S3061-1/2"S3061-1/4"
6306-12206306-12506306-13046306-13086306-15086306-15166306-16156306-16506306-20126306-20156306-20506306-20806306-21066306-21086306-22086306-22156306-24156306-24506306-25266306-25366306-30426306-30826306-38066306-41226306-43066306-51626306-58026306-85066306-87066307-06106307-06406307-06606307-06806307-08106307-08126307-08286307-08386307-08606307-08646307-08806307-10056307-10106307-10126307-10146307-10166307-10206307-10806307-12106307-12126307-12146307-12166307-12176307-12186307-1220
S3061-22MMS306-12*50MMS3061-3/4"S3061-3/8"S3061-5/8"S3061-5/16"S306-16*150MMS306-16*50MMS306-1/2"12*2"S306-20*150MMS306-20*50MMS306-20*80MMS306-1/2"*6"S3062/E1-8MMS3062/E2-8MMS306-22*150MMS306-24*150MMS306-24*50MMS3062/E2-5/16"UNFS3062/E1-5/16"UNFS306-3/4"10*2"S306-3/8"16*2"S306-3/8"*6"S306-1/4"20*2"S306-3/4"*6"S306-5/16"18*2"S306-5/8"11*2"S306-5/8"*6"S306-7/8"*6"S307-6*100MMS307-6*40MMS307-6*60MMS307-6*80MMS307-8*100MMS307-8*120MMS307-8*28MMS307-8*38MMS307-8*60MMS307-8*64MMS307-8*80MMS307-10*50MMS307-10*100MMS307-10*120MMS307-10*140MMS307-10*160MMS307-10*29MMS307-10*80MMS307-12*100MMS307-12*120MMS307-12*140MMS307-12*160MMS307-12*165MMS307-12*180MMS307-12*29MM
1061061061061061061061061061061061061061061061061191191199999999999999090909090909090909090909090909090908888888888888890888888
889088888888909090909090903333909090333390909090909090909091919191919191919191919191919191919191919191919191
I n d e x B y O r d e r n o .
148
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6317-07406317-07456317-07506317-07556317-07606317-07656317-08106317-08306317-08356317-08406317-08456317-08506317-08556317-08606317-08656317-08706317-08756317-08806317-08906317-09306317-09506317-09606317-09656317-09706317-09806317-09906317-10106317-10126317-10146317-10406317-10506317-10556317-10606317-10656317-10706317-10756317-10806317-10906317-11066317-11076317-11086317-11256317-11266317-11286317-11506317-12106317-12116317-12126317-12146317-12606317-12656317-12706317-12756317-1280
Order no. Item no. Page Order no. Item no. PageSF317-7MM*40MMSF317-7MM*45MMSF317-7MM*50MMSF317-7MM*55MMSF317-7MM*60MMSF317-7MM*65MMSF317-8MM*100MMSF317-8MM*30MMSF317-8MM*35MMSF317-8MM*40MMSF317-8MM*45MMSF317-8MM*50MMSF317-8MM*55MMSF317-8MM*60MMSF317-8MM*65MMSF317-8MM*70MMSF317-8MM*75MMSF317-8MM*80MMSF317-8MM*90MMSF317-9MM*30MMSF317-9MM*50MMSF317-9MM*60MMSF317-9MM*65MMSF317-9MM*70MMSF317-9MM*80MMSF317-9MM*90MMSF317-10MM*100MMSF317-10MM*120MMSF317-10MM*140MMSF317-10MM*40MMSF317-10MM*50MMSF317-10MM*55MMSF317-10MM*60MMSF317-10MM*65MMSF317-10MM*70MMSF317-10MM*75MMSF317-10MM*80MMSF317-10MM*90MMSF3171-10MM*60MMSF3171-10MM*70MMSF3171-10MM*80MMSF3171-12MM*50MMSF3171-12MM*65MMSF3171-12MM*80MMSF3171-10MM*50MMSF317-12MM*100MMSF317-12MM*110MMSF317-12MM*120MMSF317-12MM*140MMSF317-12MM*60MMSF317-12MM*65MMSF317-12MM*70MMSF317-12MM*75MMSF317-12MM*80MM
6317-12906317-13106317-13126317-13136317-13146317-13156317-13166317-13556317-13606317-13656317-13706317-13806317-13906317-16306317-16406317-18406317-18506317-19606319-11016319-11026319-11036319-11046319-11066319-11076319-11126319-11146319-11216319-11226319-11236319-11246319-11266319-11506319-11856319-12126319-12146319-13816319-14166319-15116319-15506319-16106319-16156319-16166319-16406319-16556319-16606319-16806319-18106319-18116319-18126319-18136319-18156319-18316319-18326319-1835
SF317-12MM*90MMSF317-13MM*100MMSF317-13MM*120MMSF317-13MM*130MMSF317-13MM*140MMSF317-13MM*150MMSF317-13MM*160MMSF317-13MM*55MMSF317-13MM*60MMSF317-13MM*65MMSF317-13MM*70MMSF317-13MM*80MMSF317-13MM*90MMSF3171-6MM*30MMSF3171-6MM*40MMSF3171-8MM*40MMSF3171-8MM*50MMSF3171-9MM*60MMSF3191-10MM*100MMSF3191-10MM*120MMSF3191-10MM*130MMSF3191-10MM*150MMSF3191-10MM*60MMSF3191-10MM*80MMSF3191-10MM*29MMSF3191-10MM*140MMSF3191-12MM*100MMSF3191-12MM*120MMSF3191-12MM*140MMSF3191-12MM*150MMSF3191-12MM*80MMSF3191-10MM*50MMSF3191-12MM*185MMSF3191-1/2"*120MMSF3191-1/2"*4"SF3191-3/8"*100MMSF3191-1/4"*60MMSF3191-5/16"*100MMSF3191-5MM*50MMSF3191-6MM*100MMS3191-16*150MMSF3191-6MM*160MMSF3191-6MM*40MMSF3191-6MM*55MMSF3191-6MM*60MMSF3191-6MM*80MMSF3191-8MM*100MMSF3191-8MM*110MMSF3191-8MM*120MMSF3191-8MM*130MMSF3191-8MM*150MMSF3191-3/8"*31/8"SF3191-3/8"*33/16"SF3191-8MM*35MM
767676767676767676767676767676767676767676767676767777777777777777777777777777777777777777777777777777777777
777777777777777777777777777777777777929292929292929292929292929292929292929292929292929292929292929292929292
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
149
Order no. Item no. Page Order no. Item no. Page6319-18606319-18806319-18886319-21086319-21106319-21216319-21226319-26556319-26616319-28606319-28806319-61256319-90036319-90056319-90076321-01806322-05486322-11546322-11746322-11946322-12346322-13056322-67126323-00106323-00136323-00166323-21026323-21046323-23086323-25086323-25166324-00106324-00136324-00166325-00126325-00146325-00386325-00516325-01106325-01506325-01606325-01706325-01906325-02656325-03156325-03206325-03256325-03306325-04206325-04256325-04306325-04356325-04406325-0450
SF3191-8MM*60MMSF3191-8MM*80MMSF3191-8MM*125MMS3192-10*80MMS3192-10*100MMS3192-12*100MMS3192-12*120MMS3192-6*55MMS3192-6*60MMS3192-8*60MMS3192-8*80MMSF3191-6MM*125MMS319LT-3MMS319LT-5MMS319LT-7MMSF3250-10MM*80MMS322C-5MM*48MMSF3221-15*42MMSF3221-17*42MMSF3221-19*42MMSF3221-23*42MMSF3221-30*50MMS311NEE-12MMSF323-10MMSF323-13MMSF323-16MMS323H-1/2"S323H-1/4"S323H-3/8"S323H-5/8"S323H-5/16"SF324-10MMSF324-13MMSF324-16MMS325-1/2"S325-1/4"S325-3/8"S325-5/16"SF3250-10MM*100MMSF3250-10MM*50MMSF3250-10MM*60MMSF3250-10MM*70MMSF3250-10MM*90MMSF3250-10MM*65MMSF3250-3MM*15MMSF3250-3MM*20MMSF3250-3MM*25MMSF3250-3MM*30MMSF3250-4MM*20MMSF3250-4MM*25MMSF3250-4MM*30MMSF3250-4MM*35MMSF3250-4MM*40MMSF3250-4MM*50MM
6325-05256325-05306325-05356325-05406325-05456325-05506325-05606325-06256325-06306325-06356325-06406325-06456325-06506325-06556325-06606325-06706325-07506325-08456325-08506325-08556325-08606325-08656325-08706325-08756325-08806325-09606325-09706325-15456325-15506325-16436325-16456325-16506325-18456325-18506325-18606325-23356325-24206325-25306325-25406325-25456325-26406325-26456325-26506325-27706325-28456325-28506325-51046325-51216325-53086325-55166329-01106329-01126329-01606329-0180
SF3250-5MM*25MMSF3250-5MM*30MMSF3250-5MM*35MMSF3250-5MM*40MMSF3250-5MM*45MMSF3250-5MM*50MMSF3250-5MM*60MMSF3250-6MM*25MMSF3250-6MM*30MMSF3250-6MM*35MMSF3250-6MM*40MMSF3250-6MM*45MMSF3250-6MM*50MMSF3250-6MM*55MMSF3250-6MM*60MMSF3250-6MM*70MMSF3250-7MM*50MMSF3250-8MM*45MMSF3250-8MM*50MMSF3250-8MM*55MMSF3250-8MM*60MMSF3250-8MM*65MMSF3250-8MM*70MMSF3250-8MM*75MMSF3250-8MM*80MMSF3250-9MM*60MMSF3250-9MM*70MMSF3251-5MM*45MMSF3251-5MM*50MMSF3251-6MM*43MMSF3251-6MM*45MMSF3251-6MM*50MMSF3251-8MM*45MMSF3251-8MM*50MMSF3251-8MM*60MMSF3252-3MM*35MMSF3252-4MM*20MMSF3252-5MM*30MMSF3252-5MM*40MMSF3252-5MM*45MMSF3252-6MM*40MMSF3252-6MM*45MMSF3252-6MM*50MMSF3252-7MM*70MMSF3252-8MM*45MMSF3252-8MM*50MMS325X-1/4"S325X-1/2"S325X-3/8"S325X-5/16"S329-10*100MMS329-10*120MMS329-10*60MMS329-10*80MM
92929281818181818181819281818178
124878787878753
125125125
4040404040
125125125
4040404078787878787878787878787878787878
787878787878787878787878787878787878787878787878787878797979797979797979797979797979797979794040404080808080
I n d e x B y O r d e r n o .
150
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6329-02106329-02126329-02146329-02166329-02806329-06106329-06406329-06606329-06806329-08106329-08126329-08606329-08806329-11106329-11126329-11606329-11806329-12106329-12126329-12146329-12166329-12806329-15506329-15606329-16106329-16406329-16606329-16806329-18106329-18126329-18606329-18806330-01046330-03086330-05166331-01026331-01026331-01046331-03086331-05166331-11026331-11046331-13086331-15166331-50016331-50046331-50056331-50066331-50086331-50106331-50126331-50166331-50206331-5024
Order no. Item no. Page Order no. Item no. PageS329-12*100MMS329-12*120MMS329-12*140MMS329-12*160MMS329-12*80MMS329-6*100MMS329-6*40MMS329-6*60MMS329-6*80MMS329-8*100MMS329-8*120MMS329-8*60MMS329-8*80MMS3291-10*100MMS3291-10*120MMS3291-10*60MMS3291-10*80MMS3291-12*100MMS3291-12*120MMS3291-12*140MMS3291-12*160MMS3291-12*80MMS3291-5*50MMS3291-5*60MMS3291-6*100MMS3291-6*40MMS3291-6*60MMS3291-6*80MMS3291-8*100MMS3291-8*120MMS3291-8*60MMS3291-8*80MMS330-1/4"S330-3/8"S330-5/16"S331-1/2"S331-1/2"S331-1/4"S331-3/8"S331-5/16"S331X-1/2"S331X-1/4"S331X-3/8"S331X-5/16"DIN315-1"DIN315-4MMDIN315-5MMDIN315-6MMDIN315-8MMDIN315-10MMDIN315-12MMDIN315-16MMDIN315-20MMDIN315-24MM
6331-51026331-51046331-53046331-53086331-53166331-55086331-55166333-01056334-11856340-00056340-00066340-00086340-00106340-00126340-00146340-00166340-00206360-00046360-00056360-00066360-00076360-00086360-00096360-04106360-04126360-04136360-04146360-04166360-04196360-04226360-04236360-04246360-04256360-04286360-04326360-10046360-10056360-10066360-10076360-10086360-10096360-10106360-10126360-10136360-10166360-10196360-10226360-10256360-20066360-20076360-30096360-30126360-40046360-4005
DIN315-1/2"DIN315-1/4"DIN315-3/4"DIN315-3/8"DIN315-3/16"DIN315-5/8"DIN315-5/16"S333-1"*5"S334-11/8"*5"S3400-5MMS3400-6MMS3400-8MMS3400-10MMS3400-12MMS3400-14MMS3400-16MMS3400-20MMS360-4MMS360-5MMS360-6MMS360-7MMS360-8MMS360-9MMS360CP-10MMS360CP-12MMS360CP-13MMS360CP-14MMS360CP-16MMS360CP-19MMS360CP-22MMS360CP-3MMS360CP-4MMS360CP-25MMS360CP-28MMS360CP-32MMS360B-4MMS360B-5MMS360B-6MMS360B-7MMS360B-8MMS360B-9MMS360B-10MMS360B-12MMS360B-13MMS360B-16MMS360B-19MMS360B-22MMS360B-25MMS360CP-6MMS360CP-7MMS360BWN-9MMS360BWN-12MMS360C-4MMS360C-5MM
808080808080808080808080809494949494949494949494949494949494949440404041414141414141414198989898989898989898
989898989898984949606060606060606020202020202020202020202020202020202021212121212121212121212121202027272121
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
151
Order no. Item no. Page Order no. Item no. Page6360-40066360-40076360-40086360-40096360-40106360-40126360-40136360-40166360-40196360-40226360-40256360-44056360-50046360-50056360-50066360-50086360-50106360-50126360-51066360-51086360-51106360-51126360-52086360-52096360-74556360-77876360-90056360-90066360-90086360-90106360-90126361-10016361-11026361-11046361-12016361-12126361-12146361-12346361-12386361-12516361-12586361-12716361-12786361-13046361-13086361-13166361-15086361-15166361-17086361-17166361-19136361-20056361-20066361-2008
S360C-6MMS360C-7MMS360C-8MMS360C-9MMS360C-10MMS360C-12MMS360C-13MMS360C-16MMS360C-19MMS360C-22MMS360C-25MMS360CP-5MMS360LK-4MMS360LK-5MMS360LK-6MMS360LK-8MMS360LK-10MMS360LK-12MMS360CI-6MMS360CI-8MMS360CI-10MMS360CI-12MMS360CP-8MMS360CP-9MMS3607-4.5*56MMS3607-7*87MMS360WO-5MMS360WO-6MMS360WO-8MMS360WO-10MMS360WO-12MMS3611-1"S3611-1/2"S3611-1/4"S3611BB-1"S3611BB-1/2"S3611BB-1/4"S3611BB-3/4"S3611BB-3/8"S3611BB-5/16"S3611BB-5/8"S3611BB-7/16"S3611BB-7/8"S3611-3/4"S3611-3/8"S3611-3/16"S3611-5/8"S3611-5/16"S3611-7/8"S3611-7/16"S3611BB-3/16"S361R-5MMS361R-6MMS361R-8MM
6362-00046362-00056362-00066362-00086362-10046362-10056362-10066362-10086362-10106362-10126362-20046362-20056362-20066362-20086362-20106362-20126362-30046362-30056362-30066362-30086362-30106362-30126362-40046362-40056362-40066362-40086362-40106362-40126364-00066364-00086364-00106364-00126365-00056365-00086365-01066365-10056365-10066365-10086369-01106369-11116370-00046370-00056370-00066370-00086370-10046370-10056370-10066370-10086370-10106370-10126370-10136370-10166370-10196370-1022
S362-4MMS362-5MMS362-6MMS362-8MMS362C-4MMS362C-5MMS362C-6MMS362C-8MMS362C-10MMS362C-12MMS362LK-4MMS362LK-5MMS362LK-6MMS362LK-8MMS362LK-10MMS362LK-12MMS362CP-4MMS362CP-5MMS362CP-6MMS362CP-8MMS362CP-10MMS362CP-12MMS362B-4MMS362B-5MMS362B-6MMS362B-8MMS362B-10MMS362B-12MMS364LK-6MMS364LK-8MMS364LK-10MMS364LK-12MMS365LK-5MMS365LK-8MMS365LK-6MMS365DLK-5MMS365DLK-6MMS365DLK-8MMS369-11MMS369X-11MMS370-4MMS370-5MMS370-6MMS370-8MMS370B-4MMS370B-5MMS370B-6MMS370B-8MMS370B-10MMS370B-12MMS370B-13MMS370B-16MMS370B-19MMS370B-22MM
212121212121212121212120202020202020212121212020303027272727272222222222222222222222222222222222222222232323
262626262727272727272626262626262626262626262727272727272828282828282828282847472424242425252525252525252525
I n d e x B y O r d e r n o .
152
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6370-10256370-20046370-20056370-20066370-20086370-20106370-20126370-20136370-20166370-20196370-20226370-20256370-30036370-30046370-30056370-30066370-30086370-30106370-30126370-30136370-30146370-30166370-30196370-30226370-30256370-30286370-30326371-01056371-01066371-01086371-01106371-01126380-00046380-00056380-00066380-00086380-50066380-50086380-80046380-80056380-80066380-80086380-80106380-80126383-11436390-01416390-01426390-01476390-03166390-05166391-01006392-00016393-00016394-0001
Order no. Item no. Page Order no. Item no. PageS370B-25MMS370C-4MMS370C-5MMS370C-6MMS370C-8MMS370C-10MMS370C-12MMS370C-13MMS370C-16MMS370C-19MMS370C-22MMS370C-25MMS370CP-3MMS370CP-4MMS370CP-5MMS370CP-6MMS370CP-8MMS370CP-10MMS370CP-12MMS370CP-13MMS370CP-14MMS370CP-16MMS370CP-19MMS370CP-22MMS370CP-25MMS370CP-28MMS370CP-32MMS371LK-5MMS371LK-6MMS371LK-8MMS371LK-10MMS371LK-12MMS380-4MMS380-5MMS380-6MMS380-8MMS380LK-6MMS380LK-8MMS380CP-4MMS380CP-5MMS380CP-6MMS380CP-8MMS380CP-10MMS380CP-12MMS2831I4-3/16"*5/16"SF3900-1/4"*15/16"SF3900-1/4"*21/2"SF3900-1/4"*7/8"SF3900-3/16"*1/2"SF3900-5/16"*11/2"S391-1"S392-1"S393-1"S394-1"
6395-00016401-50066401-52126401-54126404-03166410-00036410-00056410-00076410-00106410-01056413-04606413-05806413-06906413-08106413-08806413-10136413-10906413-12156414-00016414-02016414-04016414-04036414-06156414-07086414-08036414-08056432-21046432-23086432-25166444-10116444-10126444-38126460-01016460-01086460-01126460-01216460-01256460-01616460-01626460-01666460-02016460-02026460-02166460-02416460-02426460-02456460-08106460-08506460-08606460-08756460-10606460-12166460-12806460-1610
S395-1"S4015-6"S4015-21/2"S4015-41/2"SF414-3/16"S4100-3KGSS4100-5KGSS4100-7KGSS4100-10KGSS4100-1.5KGSSF413-4MM*60MMSF413-5MM*80MMSF413-6MM*90MMSF413-8MM*100MMSF413-8MM*80MMSF413-10MM*130MMSF413-10MM*90MMSF413-12MM*150MMSF414-1"SF414-1/2"SF414-1/4"SF414-3/4"SF414-5/16"SF414-7/8"SF414-3/8"SF414-5/8"S4322-1/4"S4322-3/8"S4322-5/16"DIN444-10*110MMDIN444-10*120MMDIN444-3/8"*120MMS4600-10*100MMS4600-10*80MMS4600-10*120MMS4600-12*100MMS4600-12*150MMS4600-16*150MMS4600-16*29MMS4600-16*160MMS4600-20*150MMS4600-20*29MMS4600-20*160MMS4600-24*100MMS4600-24*29MMS4600-24*250MMS4600-8*100MMS4600-8*50MMS4600-8*60MMS4600-8*75MMS4600-10*60MMS4600-12*160MMS4600-12*80MMS4600-16*100MM
2525252525252525252525252424242424242424242424242424242424242424292929292929292929292929
106131131131131131126126126127
12711911911936
118118118118118101101101101101101101101
3636363636363636414141959595
100100100100100100100100100100100100100100100100100100100100100100
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
153
Order no. Item no. Page Order no. Item no. Page6460-16126460-20126460-22146460-22206460-24166462-21026501-31026501-35086501-40016505-00046505-00056505-00066505-00086505-00106505-00126505-50076505-50606506-10066506-14126506-20066506-24126507-00046507-00056507-00066507-00086507-00106508-00046508-00056508-00066508-00086508-00106508-00126508-00156510-15346510-17366510-19366510-71806510-95266511-00036511-00046511-00056511-00066511-00086511-00206512-00026512-00036512-00046512-00056512-00066512-00086534-10096534-11096535-90056535-9010
S4600-16*120MMS4600-20*120MMS4600-22*140MMS4600-22*29MMS4600-24*160MMS4322-1/2"S5013-1/2"S5013-5/8"S5014-1"S505-4"(100MM)S505-5"(125MM)S505-6"(150MM)S505-8"(29MM)S505-10"(250MM)S505-12"(300MM)S505H-7"S505H-6"S506L-6"S506L-41/2"S506R-6"S506R-41/2"S507-4"(100MM)S507-5"(125MM)S507-6"(150MM)S507-8"(29MM)S507-10"(250MM)S508-4"(100MM)S508-5"(125MM)S508-6"(150MM)S508-8"(29MM)S508-10"(250MM)S508-12"(300MM)S508-15"(380MM)SF510-15MM*34.5MMS510-17*36MMS510-19*36MMSF510-7MM*18MMSF510-9.5MM*26MMSF511-3MMSF511-4MMSF511-5MMSF511-6MMSF511-8MMSF511-2MMSF512-2MMSF512-3MMSF512-4MMSF512-5MMSF512-6MMSF512-8MMS5341-9MMS5341-9MMS5359-5MMS5359-10MM
6537-30196537-31196580-00016580-00066580-00086580-00106580-00126580-00166580-00206580-00246580-00306580-01026580-01046580-03086580-05086580-05166582-00016582-00066582-00086582-00106582-00126582-00166582-00206582-00246582-00306582-00366582-01026582-01046582-03046582-03086582-05086582-05166661-01026661-01046661-03046661-03086661-03166661-05086661-05166661-07166700-71636700-71656700-72036700-72356700-72536700-73036700-73056700-73256700-74016700-74036700-75036700-76036700-78016700-7803
S5373-19MMS5373-19MMS580-1"S580-6MMS580-8MMS580-10MMS580-12MMS580-16MMS580-20MMS580-24MMS580-30MMS580-1/2"S580-1/4"S580-3/8"S580-5/8"S580-5/16"S582-1"S582-6MMS582-8MMS582-10MMS582-12MMS582-16MMS582-20MMS582-24MMS582-30MMS582-36MMS582-1/2"S582-1/4"S582-3/4"S582-3/8"S582-5/8"S582-5/16"S661-1/2"S661-1/4"S661-3/4"S661-3/8"S661-3/16"S661-5/8"S661-5/16"S661-7/16"SWR/7*7-3/16"*305MSWR/7*7-5/16"*305MSWR/7*7-2.0MM*305MSWR/7*7-12.0MM*305MSWR/7*7-2.5MM*305MSWR/7*7-3.0MM*305MSWR/7*7-10.0MM*305MSWR/7*7-5/32"*305MSWR/7*7-1/4"*305MSWR/7*7-4.0MM*305MSWR/7*7-5.0MM*305MSWR/7*7-6.0MM*305MSWR/7*7-1/8"*305MSWR/7*7-8.0MM*305M
100100100100100
41494949
120120120120120120120120119119119119120120120120120120120120120120120120107107107107107
353535353535353535353535
126126126126
126126
89898989898989898989898989898888888888888888888888888888888837373737373737373838383838383838383838383838
I n d e x B y O r d e r n o .
154
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6701-91036701-91236701-91636701-91656701-92036701-92536701-93036701-93256701-94016701-94036701-95036701-96036701-98016701-98036735-00096735-00106735-00126735-00706736-00066736-00106780-10016780-10036780-10046780-10056780-10076780-10086780-10096780-10126780-10146780-10176780-10196780-10206780-10216780-10236780-10246780-10256780-10266780-10286780-10296780-10306780-10326780-10336780-10346780-10356780-10366780-10376780-10476780-10526780-10546780-10556780-10566780-10606780-10616780-1064
Order no. Item no. Page Order no. Item no. PageSWR/7*19-10.0MM*305MSWR/7*19-12.0MM*305MSWR/7*19-3/16"*305MSWR/7*19-5/16"*305MSWR/7*19-2.0MM*305MSWR/7*19-2.5MM*305MSWR/7*19-3.0MM*305MSWR/7*19-5/32"*305MSWR/7*19-1/4"*305MSWR/7*19-4.0MM*305MSWR/7*19-5.0MM*305MSWR/7*19-6.0MM*305MSWR/7*19-1/8"*305MSWR/7*19-8.0MM*305MS7350-9MMS7350-10MMS7350-12MMS7350-7MMS7360-6MMS7360-10MMSF7801-3MM*35MM*M6*41MM*86MMSF7801-1/4"*64MM*M10*105MM*182MMSF7801-1/4"*64MM*M12*105MM*182MMSF7801-1/4"*64MM*W1/2"*110MM*187MMSF7801-1/8"*38MM*M6*40MM*90MMSF7801-1/8"*38MM*M5*35MM*85MMSF7801-1/8"*38MM*W1/4"*50MM*100MMSF7801-2.5MM*35MM*M5*40MM*86MMSF7801-10MM*90MM*M20*105MM*215MMSF7801-3/16"*51MM*M8*60MM*124MMSF7801-3/32"*32MM*M6*30MM*70MMSF7801-3MM*38MM*M6*48MM*97MMSF7801-4MM*45MM*M8*54MM*115MMSF7801-5/32"*45MM*M6*48MM*106MMSF7801-5/32"*45MM*M8*50MM*108MMSF7801-5/32"*W1/4"SF7801-5MM*52MM*M10*61MM*128MMSF7801-6MM*63MM*M12*79MM*162MMSF7801-7MM*70MM*M14*90MM*178MMSF7801-8MM*80MM*M16*102MM*214MMSF7801L-2.5MM*35MM*M5*40MM*86MMSF7801L-3MM*38MM*M6*48MM*97MMSF7801L-4MM*45MM*M8*54MM*115MMSF7801L-5MM*52MM*M10*61MM*128MMSF7801L-6MM*63MM*M12*79MM*162MMSF7801L-8*80MM*M16*102MM*214MMSF7801-2MM*32MM*M6*40MM*83MMSF7801-6MM*63MM*M12*80MM*155MMSF7801-6MM*64MM*M10*63MM*145MMSF7801-7MM*70MM*M12*81MM*178MMSF7801-8MM*80MM*M12*76MM*175MMSF7801-2MM*21MM*M5*40MM*72MMSF7801-4MM*45MM*M6*57MM*117MMSF7801-3/32"*32MM*W3/16"*30MM*70MM
6780-10656780-10676780-10686780-10696780-10706780-10716780-10736780-10766780-10896780-10956780-11026780-11046780-11076780-11086780-11096780-11106780-11116780-11126780-11136780-11146780-11156780-11166780-11176780-11186780-11196780-11216780-11246780-11256780-11336780-11346780-11356780-11366780-11446780-11526780-11536780-11546780-11556780-11576780-11586780-11596780-11606780-11616780-11626780-11636780-11646780-11656780-11666780-11686780-11696780-11726780-11776780-11796780-11806780-1181
SF7801-3/16"*51MM*W5/16"*52MM*116MMSF7801-1/8"*38MM*W3/16"*40MM*90MMSF7801-3MM*32MM*M5*40MM*80MMSF7801-4MM*40MM*M6*44MM*95MMSF7801-5MM*57MM*M8*52MM*120MMSF7801-6MM*63MM*M10*63MM*135MMSF7801-1/8"*38MM*M5*40MM*90MMSF7801-4MM*45MM*M8*57MM*115MMSF7801-2.5MM*32MM*M6*42MM*85MMSF7801-5MM*51MM*M8*57MM*128MMSF7801-3/16"*51MM*M10*63MM*127MMSF7801-3/32"*32MM*M5*40MM*80MMSF7801L-1/8"*38MM*M6*40MM*90MMSF7801L-5/32"*45MM*M6*48MM*106MMSF7801L-5/32"*45MM*M8*60MM*118MMSF7801L-3/16"*51MM*M8*60MM*124MMSF7801L-1/8"*38MM*M5*35MM*85MMSF7801-3/32"*35MM*W3/16"*40MM*86MMSF7801-3/32"*37MM*1/4"UNC*48MM*97MMSF7801-1/8"*37MM*1/4"UNC*48MM*97MMSF7801-5/32"*48MM*1/4"UNC*48MM*108MMSF7801-5/32"*48MM*5/16"UNC*56MM*116MMSF7801-3/16"*53MM*5/16"UNC*56MM*121MMSF7801-3/16"*53MM*3/8"UNC*67MM*132MMSF7801-1/4"*65MM*3/8"UNC*67MM*148MMSF7801-5/16"*83MM*1/2"UNC*81MM*182MMSF7801-5/16"*80MM*M16*76MM*175MMSF7801-5MM*51MM*M8*58MM*122MMSF7801L-5/16"*16MMSF7801-6MM*64MM*M10*80MM*162MMSF7801-3/16"*51MM*M8*52MM*116MMSF7801-1/4"*64MM*M10*80MM*157MMSF7801-5/32"*48MM*M6*48MM*108MMSF7801-5/32"*48MM*M8*56MM*116MMSF7801-3/16"*53MM*M10*67MM*132MMSF7801-1/4"*65MM*M10*67MM*148MMSF7801-1/8"*37MM*M6*48MM*97MMSF7801-7/32"*57.5MM*3/8"UNC*67MM*137MMSF7801-1/4"*65MM*1/2"UNC*81MM*162MMSF7801-3/16"*53MM*1/4"UNC*48MM*113MMSF7801L-1/8"*38MM*M5*40MM*90MMSF7801L-1/8"*37MM*1/4"UNC*48MM*97MMSF7801L-5/32"*48MM*1/4"UNC*48MM*108MMSF7801L-5/32"*48MM*5/16"UNC*56MM*116MMSF7801L-3/16"*53MM*5/16"UNC*56MM*121MMSF7801L-3/16"*53MM*3/8"UNC*67MM*132MMSF7801L-1/4"*65MM*3/8"UNC*67MM*148MMSF7801L-5/16"*83MM*1/2"UNC*81MM*182MMSF7801L-3/8"*90MM*5/8"UNC*105MM*215MMSF7801-6MM*64MM*M12*80MM*162MMSF7801-5/32"*45MM*M8*60MM*118MMSF7801-1/8"*38MM*M6*50MM*100MMSF7801-1/4"*65MM*M12*81MM*162MMSF7801-4MM*45MM*M8*57MM*118MM
393939393939393939393939393935353535353563636363636363626263636262636363626262626262626262626363636362636363
636362636363636363626362626262626263636363636363636363636263636363636363626363636262626262626262626363636363
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
155
Order no. Item no. Page Order no. Item no. Page6780-11886780-11896780-11936780-11986780-12016780-12066780-12116780-12196780-12586780-12646780-12656780-12686780-12706780-12856780-13826780-13836780-13846780-13856780-13876780-13886780-13896780-13906780-14166780-15326780-15666780-18126780-18136780-18146780-18156780-18166780-18186780-18196780-21016780-21086780-21106780-21116780-21126780-21146780-21166780-21206780-21216780-21506780-21566780-21576780-21606780-21616780-21666780-21816780-21886780-22016780-22026780-22036780-22046780-2205
SF7801-1/8"*37MM*M5*41MM*90MMSF7801L-7MM*70MM*M14*90MM*178MMSF7801-1/8"*35MM*W3/16"*40MM*85MMSF7801-3/16"*57MM*W5/16"*60MM*128MMSF7801-1/4"*63MM*W3/8"*80MM*153MMSF7801-1/4"*64MM*W3/8"*80MM*157MMSF7801-16MM*160MM*M24*170MM*355MMSF7801-5/16"*83MM*M12*81MM*182MMSF7801L-3/16"*53MM*1/4"UNC*48MM*113MMSF7801-1/4"*65MM*5/16"UNC*56MM*137MMSF7801L-1/4"*65MM*5/16"UNC*56MM*137MMSF7801-2MM*32MM*M5*40MM*86MMSF7801-20MM*29MM*M27*180MM*425MMSF7801-3MM*37MM*M5*41MM*90MMSF7801/IR-3.0MM*25MM*M5*20MM*65MMSF7801/IR-4.0MM*25MM*M6*20MM*65MMSF7801/IR-5.0MM*30MM*M6*20MM*70MMSF7801/IR-6.0MM*40MM*M8*25MM*85MMSF7801/IL-3.0MM*25MM*M5*20MM*65MMSF7801/IL-4.0MM*25MM*M6*20MM*65MMSF7801/IL-5.0MM*30MM*M6*20MM*70MMSF7801/IL-6.0MM*40MM*M8*25MM*85MMSF7801-1/4"*64MM*M10*85MM*162MMSF7801-5/32"*45MM*M8*57MM*115MMSF7801-12MM*144MM*M20*116MM*278MMSF7801L-8MM*80MM*M12*76MM*175MMSF7801L-10MM*100MM*M20*105MM*225MMSF7801L-12MM*144MM*M20*120MM*284MMSF7801L-14MM*168MM*M22*140MM*328MMSF7801-10MM*100MM*M20*105MM*225MMSF7801-12MM*144MM*M20*120MM*284MMSF7801-14MM*168MM*M22*140MM*328MMSF78021N/R-M10*102MMSF78021N/R-M8*86.5MMSF78021/R-M10*102MMSF78021N/L-M10*102MMSF78021/R-M12*122.5MMSF78021/R-M14*138MMSF78021/R-M16*148.5MMSF78021/R-M20*185MMSF78021N/R-M12*122.5MMSF78021N/R-M5*68MMSF78021/R-M5*68MMSF78021N/L-M5*68MMSF78021N/R-M6*68MMSF78021N/L-M6*68MMSF78021/R-M6*68MMSF78021N/L-M8*86.5MMSF78021/R-M8*86.5MMSF78021/L-M10*102MMSF7802-2MMSF7802-3MMSF7802-4MMSF7802-5MM
6780-22086780-22106780-22126780-22146780-22166780-22206780-22216780-22256780-22566780-22666780-22886780-23066780-23816780-25616780-27126780-27146780-27186780-27316780-27336780-27536780-30026780-30036780-30046780-30056780-30066780-30076780-30086780-30106780-30126780-30256780-31146780-31166780-33166780-33186780-33326780-35326780-36156780-37146780-37186780-37326780-50026780-50036780-50046780-50056780-50066780-50086780-50106780-50256780-51046780-51086780-53086780-53166780-53326780-5516
SF7802-8MMSF7802-10MMSF7802-12MMSF78021/L-M14*138MMSF78021/L-M16*148.5MMSF78021/L-M20*185MMSF78021/L-M12*122.5MMSF7802-2.5MMSF78021/L-M5*68MMSF78021/L-M6*68MMSF78021/L-M8*86.5MMSF7802-6MMSF7802-3/8"SF7802-5/16"SF7802-1/2"SF7802-1/4"SF7802-1/8"SF7802-3/16"SF7802-3/32"SF7802-5/32"SF7803-2MMSF7803-3MMSF7803-4MMSF7803-5MMSF7803-6MMSF7803-7MMSF7803-8MMSF7803-10MMSF7803-12MMSF7803-2.5MMSF7803-14MMSF7803-16MMSF7803-3/16"SF7803-3/8"SF7803-3/32"SF7803-5/32"SF7803-5/16"SF7803-1/4"SF7803-1/8"SF7803-7/32"S7805-2MMS7805-3MMS7805-4MMS7805-5MMS7805-6MMS7805-8MMS7805-10MMS7805-2.5MMS7805-1/4"S7805-1/8"S7805-3/8"S7805-3/16"S7805-3/32"S7805-5/16"
6262636363636363626362626363
103103103103103103103103
6363626262626262626266666666666666666666666666666666666666666666
666666666666666666666666666666666666666671717171717171717171717171717171717171717272727272727272727272727272
I n d e x B y O r d e r n o .
156
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
6780-55326780-65256780-66306780-68356782-10126782-10146782-10166782-10206782-11146782-11166782-11206785-00356807-01166807-01206807-01246807-04086807-04106807-04126811-00036811-00046811-00056811-00066811-00086811-00106811-03196811-03776811-04196811-04776811-05196811-05776811-06196811-06776811-08196811-08776811-10196811-10776812-00036812-00046812-00056812-00066812-00086812-00106812-10036812-10046812-10056812-10066812-10086812-10106812-70036812-70046812-70056812-70066812-70086812-7010
Order no. Item no. Page Order no. Item no. PageS7805-5/32"SF7806TR-M5*25MM*7.13MM*40MMSF7806TR-M6*30MM*8MM*45MMSF7806TR-M8*35MM*11MM*55MMSF78021N/L-M12*122.5MMSF78021N/L-M14*138MMSF78021N/L-M16*148.5MMSF78021N/L-M20*185MMSF78021N/R-M14*138MMSF78021N/R-M16*148.5MMSF78021N/R-M20*185MMS7350-3.5MMS80701-16MMS80701-20MMS80701-24MMS80704-8MMS80704-10MMS80704-12MMS811-3MMS811-4MMS811-5MMS811-6MMS811-8MMS811-10MMS811M-3MMS811M-3MMS811M-4MMS811M-4MMS811M-5MMS811M-5MMS811M-6MMS811M-6MMS811M-8MMS811M-8MMS811M-10MMS811M-10MMS812-3MMS812-4MMS812-5MMS812-6MMS812-8MMS812-10MMS812M-3MMS812M-4MMS812M-5MMS812M-6MMS812M-8MMS812M-10MMS812M-3MMS812M-4MMS812M-5MMS812M-6MMS812M-8MMS812M-10MM
6813-00036813-00046813-00056813-00066813-00086813-00106814-00036814-00046814-00056814-00066814-00086814-00106814-10036814-10046814-10056814-10066814-10086814-10106814-20036814-20046814-20056814-20066814-20086814-20106814-30036814-30046814-30056814-30066814-30086814-30106824-00196824-10196828-20036828-20046828-20056828-20066828-20076828-20086828-20106834-50016834-50026890-00046890-00066921-00046921-00136921-13036922-20036922-20036922-20046922-30576922-30716922-31576922-31716922-4038
S813-3MMS813-4MMS813-5MMS813-6MMS813-8MMS813-10MMS814-3MMS814-4MMS814-5MMS814-6MMS814-8MMS814-10MMS814L-3MMS814L-4MMS814L-5MMS814L-6MMS814L-8MMS814L-10MMS814N-3MMS814N-4MMS814N-5MMS814N-6MMS814N-8MMS814N-10MMS814N/L-3MMS814N/L-4MMS814N/L-5MMS814N/L-6MMS814N/L-8MMS814N/L-10MMSF8240-19MMSF8241-19MMSF8282-3MMSF8282-4MMSF8282-5MMSF8282-6MMSF8282-7MMSF8282-8MMSF8282-10MMSF8345-12MM*40MM*47MMSF8345-16MM*55MM*62.5MMS890HP-4"S890HP-6"S9210-4"S9210-3"S9211-3"S9222R-3"S9222R-3.5"S9222R-4"S9223-57MMS9223-71MMS9223WS-57MMS9223WS-71MMS9224-38MM
72103103103
6666666666666635999999898989737373737373737373737373737373737373737373737373737373737373737373737373
747474747474747474747474747474747474747474747474747474747474
108108107107107107107107107129129107107125125125122122122123123123123122
I n d e x B y O r d e r n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
157
Order no. Item no. Page6922-41386922-43806922-52746922-69856922-76446922-86446931-22066931-22086931-22106931-22146931-22566931-23066931-23366931-25016931-25026931-25066931-25086931-25106931-25126931-25146931-25166931-25206931-25216931-25416931-25616931-25806931-2614
S9224WS-38MMS9224WL-38MMS9225/HP-27MM*4MM*160MMS9226/HP-98MM*5MM*197MMS9227/HP-64MM*4MM*64MMS9228/HP-64MM*4MM*81MMBF312P/JL-M6*50MMBF312P/JR-M8*57MMBF312P/JR-M10*68MMBF312P/JR-M14*95MMBF312P/JL-M8*57MMBF312P/JR-M6*50MMBF312P/JR-M5*39MMB3125/L-10MMB3125/L-20MMB3125/R-6MMB3125/R-8MMB3125/R-10MMB3125/R-12MMB3125/R-14MMB3125/R-16MMB3125/R-20MMB3125/L-12MMB3125/L-14MMB3125/L-16MMB3125/L-8MMBF312P/JL-M14*95MM
122122124124124124
717171717171717272727272727272727272727271
I n d e x B y I t e m n o .
158
BASIC
S
ERIES
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
B3125/LB3125/RBF311ELBF311ERBF311HLBF311HRBF311NELBF311NERBF311N/HLBF311N/HRBF312P/JLBF312P/JRDIN 315DIN 316DIN 316DIN444LTSRTSS018S0181S0181iS0182S0182-0840NS0182iS10S161S162S163S210-E1S210-E2S210-E3S210-H1S210-H2S211-E1S211-E2S211-H1S211-H2S212-E1-100S212-E1-50S212-E1-75S212-H1-100S212-H1-50S212-HI-75S212L-E1S212L-H1S213-E1S225S225SQS231S2311S232S2343S2344S2432
Item code. Name Page Item code. Name PageLeft threaded toggleRight threaded toggle(Left threaded eye)(Right threaded eye)(Left threaded hook)(Right threaded hook)(Left threaded eye and nut)(Right threaded eye and nut)(Left threaded hook and nut)(Right threaded hook and nut)Left threaded forkRight threaded forkWing nutWing boltWing boltEye boltLeft threaded studRight threaded studSwivel (eye and eye) Swivel (eye and jaw) Swivel (eye and jaw with internal hexagonal pin) Swivel (jaw and jaw)Swivel (jaw and jaw with cotter nut pin)Swivel (jaw and jaw with internal hexagonal pin)C- linkBolt snap (double snap end)Bolt snap (double snap end)Bolt snap (double snap end)Single heavy block (eye top)Double heavy block (eye top)Triple heavy block (eye top)Single heavy block (hook top)Double heavy block (hook top)Single snatch block (eye top)Double snatch block (eye top)Single snatch block (hook top)Double snatch block (hook top)Seine block 100 mm (eye top) Seine block 50 mm (eye top) Seine block 75 mm (eye top) Seine block 100 mm (hook top) Seine block 50 mm (hook top) Seine block 75 mm (hook top) Seine block - heavy type (eye top) Seine block - heavy type (hook top)Taruma block (eye top)Bolt snap (swivel end)Bolt snap (square swivel end)Bolt snap (hook end)Safety snap hook (with safety latch)Bolt snap (hook end)Opened end thimblesClosed end thimblesDouble locking safety hook
S245S2450S2450XS2464S2466S2468S2470S2471S2476S2478S247AS247HS2482S24821S2483S249S2490S2490XS251S2511S260S261S2711S2711BBS2831S2831I3S2831-I3S2831I4S2831-I4S2831-I6S301S306 SPECIAL
S3061S3062/E1S3062/E2S306 STANDARD
S307S311EES311HES311HHS311JES311JJS311NEES311NHES311NHHS312S312/5S3121PS3121/5S3121/5CH
S3125S3125/7S3125P/4
Bolt snap (hook end)Snap hookSnap hook (with eye) Snap shackleSnap shackleSnap shackleSpring snaps (eye end)Spring snaps (hook end)Snap shackle (stamped swivel jaw)Snap shackle (cast swivel jaw)Chain snaps (closed end)Chain snaps (opened end)Snap shackle (cast swivel eye)Snap shackle headFixed snap shackleEye snaps (fixed ring)Heavy spring snaps (angled hook)Heavy spring snaps (angled hook with eye end)Eye snaps (swivel end)Heavy Slip hook (swivel end with safety latch)Wire rope clip (AISI standard)Wire rope clip - light typeOversize anchor shackle Oversize anchor shackle (nut and cotter pin)Palican hookPelican hook with stud terminalPelican hook with stud terminalPelican hook with stud terminalPelican hook with stud terminalPelican hook with stud terminalPull up cleatEye bolt -SUS typeLifting eye nut - SUS typeSwivel screwSwivel cross screwEye bolt -SUS typeLifting eye bolt (with washer and nut)Frame turnbuckle, eye and eyeFrame turnbuckle, hook and eyeFrame turnbuckle, hook and hookFrame turnbuckle, jaw and eyeFrame turnbuckle, jaw and jaw (metric thread)Frame turnbuckle with nut, eye and eyeFrame turnbuckle with nut, hook and eyeFrame turnbuckle with nut, hook and hookFrame turnbuckle, jaw and jaw (inch thread)Pipe turnbuckle, toggle and jawPipe turnbuckle, jaw and swage studPipe turnbuckle, toggle and swage studTurnbuckle toggle (countersunk head pin)&Swage terminalPipe turnbuckle, toggle and togglePipe turnbuckle, eye and togglePipe turnbuckle, toggle and swageless terminal
72726767696968687070717198989995757531313132323237424242
1161161161161161171171171171141131141141131141151151174242424342363642
424646
105105105
4343
104104
4646
104104104
484747484134342222
10610610610610610611990883333909152525254545353535457585964
575759
I n d e x B y I t e m n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
159
Item code. Name Page Item code. Name PageS312P/4S313-E1S313NL-E1S314/H1S3141S3141/AS3141/BS3141NLS3141NL/AS3141NL/BS3142S314-25S3143S314-32S314-50S314AS314ANLS314NLS315S31501S3151S3151/AS3151/BS3151NLS3151NL/AS3151NL/BS315AS315ANLS315NLS31601S31602S31606S316061S316061AS31606AS31612S31612AS31614S31614AS3192S319LTS3213S322CS3230S323HS325S325XS329S3291S330S331S331XS333S334
Pipe turnbuckle, jaw and swageless terminalTaruma block (cast sheave with brass bushing) Taruma block (nylon sheave) Mame block (cast sheave with hook top) Mame block (cast sheave) Mame block (cast sheave with eye plate)Mame block (cast sheave)Mame block (nylon sheave) Mame block (nylon sheave with eye plate)Mame block (nylon sheave) Bull snaps (eye swivel end)Mame block (cast sheave)Bull snaps (rectangular swivel end)Mame block (cast sheave)Mame block (cast sheave)Mame block (cast sheave with eye end)Mame block (nylon sheave with eye end) Mame block (nylon sheave) Mame block (double cast sheave)Wing nut - long typeMame block (double cast sheave)Mame block (double cast sheave with eye plate)Mame block (double cast sheave) Mame block (double nylon sheave) Mame block (double nylon sheave with eye plate)Mame block (double nylon sheave) Mame block (double cast sheave with eye end) Mame block (double nylon sheave with eye end) Mame block (double nylon sheave)Rail fitting (top cap)Rail fitting (top side cap)Deck hinge (angled side mount)Deck hinge (rail mount)Deck hinge (rail mount with removable pin)Deck hinge (angled side mount with removable pin)Deck hinge (side mount)Deck hinge (angled side mount)Deck hingeDeck hinge (mount with removable pin)Lag ring boltLag ring boltDiamond cast padWire eye strap-heavy typeHook anchorGrab hook (eye end)Slip hook (eye end)Slip hook (eye end with safety latch)Ring wooden screwEye wooden screwGrad hook (clevis end)Slip hook (clevis end)Slip hook (clevis end with safety latch)Bull snaps (eye swivel end)Bull snaps (rectangular swivel end)
S3400S360S3607S360BS360BWNS360CS360CIS360CPS360LKS360WOS361S3611S3611BBS361RS361RFS362S362BS362CS362CPS362LKS364LKS365DLKS365LKS369S369XS370S370BS370CS370CPS371LKS380S380CPS380LKS391S392S393S394S395S4015S4100S4200S4322S4600S461S5013S5014S505S505HS506LS506RS507S508S510S5341
Turnbuckle toggleD-shackleShackle key - castD-shackle (square head pin)Wide D-shackle (nut and cotter pin)D-shackle (oval sink pin)D-shackle (hexagonal sink pin)D-shackle (collared pin)D-shackle (locking pin)Wide D-shackleLight stamped shackleOversize D-shackleOversize D-shackle (nut and cotter pin)Light D-shackleLight D-shackle (flat screw pin)Long D-shackleLong D-shackle (square head pin)Long D-shackle (oval sink pin)Long D-shackle (collared pin)Long D-shackle (locking pin)Headboard shackle (cross bar and locking pin)Halyard shackle (cross bar with locking pin)Halyard shackle (locking pin)Locking snaps (angled hook)Locking snaps (angled hook with eye end)Anchor shackleAnchor shackle (square head pin)Anchor shackle (oval sink pin)Anchor shackle (collared pin)Anchor shackle (locking pin)Twist shackleTwist shackle (collared pin)Twist shackle with locking pinRail fitting (top side cap)Rail fitting (central cap)Rail fitting (deck cap)Rail fitting (elbow cap)Rail fitting (T-cap)Rope cleatFolding anchorPlow anchorSlip hook (swivel end with safety latch)Long wing bolt (with washer and nut)Heavy safety snap hook (with safety latch)Tiger snaps (swivel end)Tiger snaps (rectangular swivel end)Trim line cleatTrim line cleat - heavy typetSkene chocksSkene chocksBlue water cleatLow flat cleatT - plate (type2)Fender hook
5911511511311111211211111211349
11049
11011011011011011199
111112112111112113111111111127127128128128128129129128128
818185
12411840404080824041414949
622030212721212020272322222323262727262628282847472425252424292929
12612612612712711911811841
100434949
120120119120120120107126
I n d e x B y I t e m n o .
S5359S5373S580S582S661S7350S7360S7805S80701S80704S811S811MS812S812MS813S814S814LS814NS814N/LS830S840S890HPS9210S9211S9222R-3"S9222R-3.5"S9222R-4"S9223S9223WSS9224S9224WLS9224WSS9225/HPS9226/HPS9227/HPS9228/HPSAB/APLSAB/T/APL
SAH/APLSCASF126SF234USF2430SF24301SF24301BSF24302SF24302BSF2430BSF2431SF2431XSF2450SF2450XSF268
Spring fender hookAwning hookEye bolt - AISI typeEye nutConnecting linkQuick linkTriangle quick linkSwage toggleWide wing nut - long typeRectangular eye nutEye swageless terminalEye swageless terminal (Micro)Fork swageless terminalFork swageless terminal (Micro)Swageless joinerRight threaded swageless studLeft threaded swageless studRight threaded swageless stud with nutLeft threaded swageless stud with nutLight eye snaps (swivel end)Eye Snaps (rectangular swivel end)Pelican hook with linkDoor hookCover latchHinge (type3)Hinge (type3.5)Hinge (type4)HingeAngle hinge Hinge Long angle hinge Angle hingeStainless steel hinge (type L)Stainless steel hinge (type T)Stainless steel hinge (type O)Stainless steel hinge (type U)Architecture ball (right hand thread)Architecture ball with through tapped hole (right hand thread)Angled hinge ChainRing bolt (with two washers and nut)Light thimblesSpring snap (angled hook, with eye end)Spring snap (circular hook with eye end)Spring snap (circular hook and latch with eye end)Spring snaps type-1 (circular hook with opened end)Spring snaps (circular hook with angled latch)Spring snap (angled hook and latch with eye end)Spring snaps type-2 (circular hook with opened end)
Spring snaps type-2 (circular hook with weld bar end)
Snap hookSnap hook (with eye) S-hook (type 1)
SF308SF311KSF312/7SF3121/7SF3121PSF3121P/MINSF3122PSF3122P/MIN
SF3122PKSF3127PSF312PSF312P/MINSF312PBDSF312PBD/MIN
SF312PEESF312PHESF312PHHSF312PJESF312PLBD/MIN
SF317SF317SF3171SF318SF3182SF319SF3191SF3192SF320SF3201SF3202SF3204SF3205SF3206SF321SF3211SF3212SF3212HSF3214SF3214HSF3215SF3216SF322SF3221SF323SF324SF3250SF32501SF3251SF3252SF3272SF3606SF360BSF360C
Lag bolt (with wide washer and nut)Frame turnbuckle, stud and studPipe turnbuckle, jaw and eyePipe turnbuckle, eye and swage studPipe turnbuckle, jaw and swage studMini pipe turnbuckle, jaw and swage terminalPipe turnbuckle, swage terminalMini pipe turnbuckle, swage terminal and swage terminalPipe turnbuckle, stud and studPipe turnbuckle, eye and eyePipe turnbuckle, jaw and jawMini pipe turnbuckle, jaw and jawTurnbuckle pipeMini turnbuckle pipePipe turnbuckle, eye and eyePipe turnbuckle, hook and eyePipe turnbuckle, hook and hookPipe turnbuckle, jaw and eyeLong mini turnbuckle pipe Round ringRound ringRound ring (center cross bar)Ring nailEye bolt (wooden screw)Ring bolt (with washer and nut)Eye bolt (with double washer and nut)Lag ring boltSquare pad (with ring)Diamond pad (with ring)Oblong pad (with ring)Round pad (with ring)Round pad bolt (with ring)Square pad (swivel eye with ring)Square padDiamond padOblong padOblong pad - hook typeRound padRound pad - hook typeRound pad boltSquare pad (swivel eye)Wire eye strapSquare pad (with out screw hole)Eye strap - two hole typeEye strap -four hole typeDee ringDee ring (cross bar)Triangle ring (cross bar)Triangle ringTube strapShackle key-stampedD-shackle (square head pin)D-shackle (oval sink pin)
126126
89883735357299897373737374747474744848
107125125122122122123123122122122124124124124102102
1023981364545454444454444464650
8261565858606160
615656606565555555556576777781818080818685848382868685848483838286
12587
125125
78797979
129302121
160
Item code. Name Page Item code. Name Page
I n d e x B y I t e m n o .
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
161
Item code. Name Page Item code. Name PageSF360CPSF360LKFSF361RSF361RFSF370BSF370CSF370CPSF3900SF413SF414SF4900SF510SF511SF512SF541SF543SF544SF547SF548SF549SF7350SF7801SF7801SF7801/ILSF7801/IRSF7801LSF7802SF78021/LSF78021/RSF78021N/LSF78021N/RSF7803SF7805SF7805/CHSF7806TRSF8190SF8240SF8241SF8248SF8248PSF8250SF8250PSF8252SF8252PSF8253SF8253PSF8256SF8256PSF8257SF8257PSF8258SF8258PSF8282SF8340
D-shackle (collared pin)D-shackle (locking pin)Sheet shackleSheet shackle (flat screw pin)Anchor shackle (square head pin)Anchor shackle (oval sink pin)Anchor shackle (collared pin)Bar springU-bolt (with washer and nut) Heavy thimblesSquare ringT - plate (type1)Simplex clipDuplex clipLong U-bolt (with washer and nut)Long U-bolt (with washer and nut)Long U-bolt (with washer and nut)Long U-bolt (with washer and nut)Long U-bolt (with washer and nut)Long U-bolt (with washer and nut)Quick linkRight threaded stud terminalRight threaded stud terminalInside threaded terminal (left hand thread)Inside threaded terminal (right hand thread)Left threaded stud terminalEye terminalLeft threaded eyeRight threaded eyeLeft threaded eye and nutRight threaded eye and nutSwage forkSwage toggleSwage toggle (countersunk head pin)Inside threaded domehead (right hand thread)Light pulley block (type A)Light pulley block (type B)Light pulley block (type C)Pulley block (type D)Pulley block (type E)Pulley block (type H)Pulley block (type I)Pulley block (type J)Pulley block (type K)Pulley block (type L)Pulley block (type M)Pulley block (type N)Pulley block (type O)Pulley block (type P)Pulley block (type Q)Pulley block (type F)Pulley block (type G)T - terminalLight angle
SF8341SF8345SF8671ESF8671HSF8672ESF8672HSF875SF878SF880SFDIN444SFDIN444SFDIN444FTSFG216016SFG216017SFG216018SFG216019SFHSFHA/01SFHA/03SFHA/07SFHA/08SFHA/11SFHA/12SFJSFP3606SFP3606SFUSWR 1x19SWR 7x19SWR 7x7
Heavy angleVentSteering cable pulley (eye top)Steering cable pulley (hook top)Double steering cable pulley (eye top)Double steering cable pulley (hook top)S-hook (type 2)Chain snaps (double hook end)S-hook (type 3)Eye boltEye boltEye bolt (full thread)Removable rod holderFlush mount rod holderDeck mount rod holderRail mount rod holderClosed eye barFishing spear hookFishing spear hookFishing spear hookFishing spear hookFishing spear hookFishing spear hookJ-hookShackle key with plastic cover (Blue)Shackle key with plastic cover (White)U-barWire rope 1x19Wire rope 7x19Wire rope 7x7
20202323252524
131101
3679
1073535
101101101101101101
356263
103103
626666666666717264
103108108108108108109109109109109109109109109109108108107123
123129110110110110504650959676
121121121121
51130130130130131131
51303051383938
162
Terms and Conditions of Sale
SpecificationsThe manufacturer is constantly testing and improving the performance of products, thus specifications are subject to change without notice. For the latest information please contact your local distributor.
GeneralFor the purpose of these terms and conditions of sale, Structural Dynamics Co., Ltd. (Strudyna) should be referred to as "Manufacturer". Any related companies and representatives of Strudyna is referred to as a "Local distributor". Any Client purchasing Structural Dynamic items shall be referred to as the "Buyer". Products described and presented in this catalog shall be referred to as the "goods". These general terms and conditions of sale will apply to all sales of Structural Dynamic items described in this catalog and serves as a binding contract and agreement between manufacturer, local distributor and buyer.
Title and RiskThe local distributor shall hold the title and proprietary ownership of the goods until 100% of payment to the goods have been paid by the buyer to the local distributor. However unless prior written consent is agreed, the risk of damage to the goods shall be passed to the buyer upon the receipt of the goods by the buyer.
CancellationGoods purchased and confirmed by buyer may not be subject to cancellation, unless a prior written consent is given by the manufacturer or local distributor to the buyer.
Force majeureIn the event of unpredictable natural or political cause beyond the manufacturer's and local distributor's control such as but not limited to: War, Rebellion, Piracy, Civil Commotion, Political unrest, Strike or industrial dispute, fire, earthquake, flooding or draught or bad weather, the unavailability of materials or delay delivery of suppliers, the inability to secure labour force or by any other cause whatsoever beyond the Manufacturer's and Local distributor's control, the manufacture and local distributor shall notify promptly to the buyer the cause of force majeure. The manufacture and Local distributor shall have the right to cancel the contract to deliver so long as the force majeure shall continue.
WarrantyThe products listed in this catalog are supplied to the buyer with a guarantee of being free from detective craftsmanship and materials at the time of shipment. Shall to buyer be dissatisfied with the product, a written notice must be sent to local distributor within 14 days from receipt of goods and subject to replacement or cancellation of order by choice of local distributor and manufacture. The manufacture warrants that in normal usage and with proper maintenance, goods will perform under its specifications for a period of 5 years. Any goods which prove to be defective under normal use will be repaired or replaced at the manufacturer's option. The manufacture and local distributor accept no responsibility if the goods purchased from this catalog are used in applications where their safe working load listed in this catalog is exceeded or in cases where goods are improperly installed. The manufacture and local supplier make no representations for suitability to a particular design application setting. All good supplied in this catalog carry a limited lifetime warranty from the manufacture.
Price conditionsPrices quoted by local distributor to buyer shall remain unchanged for the duration of 14 days unless quantities, packaging instructions, delivery destinations or any contract details are changed. Unless further stated in order confirmation, prices are ex-local distributor premises. Should a delivery destination be reached by local distributor and buyer, the local distributor is entitled to choose any means of transport the local distributor sees it fit.
BASIC
S
ERIES
© C
opyr
ight
201
0 by
Stru
dyna
Tha
iland
163
STRUDYNA ProducT SERIESArchitectural tensile systems
Slimfix started with the ideal of redesigning a fitting that is strictly architectural for purely balustradeuse. As old cigar and frame types turnbuckles are bulky and more industrially design then decorative, and thimbles and wire clips were unpleasant looking.Slimfix was conceived to overcome these design neglects.
more >>
go to catalog menu ACCESSORY
ABOUT SLIMFIX SLIMFIX ASSEMBLY
more >>
The development of the Pa-adjuster is again an excellent example of adhering to the SAOD theory. During the development for cable truss system facade, we encounter the need for a better profile than any marine turnbuckles had provided thus far.
go to catalog menu TOOLSP2H-ADJUSTER P2H SET
P H-ADJUSTER2 V4.0
more >>
go to catalog menu
HYBRID SET ACCESSORY
HYBRID SWAGE
The Hybrid Tensioner started with the idea of having a short tensioner with smooth lines for decorative purposes but also robust enough to be installed in public places. As the name "Hybrid" suggests, the main design feature in the Hybrid tensioner is its multi function ability to accommodate three of the most popular systems in decorative design; Swage, Rod and Slimfix systems.
The AM adjuster started with it’s root from the most robust environment of the marine in mind. From the expected calm sea to the worst unexpected storm, the AM adjuster was designed to perform in environments of continues pounding from high winds, seawaters, seasonal rains, and thunders.more >>
go to catalog menu ACCESSORYFORK SWAGE TERMINAL AM ASSEMBLY
2.0
more >>
SPYDER
M-facade (or Metal frame Facade) is the first of fivefacade series scheduled for launching with Strudyna, it is the simplest construction of geometric design and load distribution.
The three major components in an M-facade setup are:"MF-connectors" which are connected directly onto Metal frame trusses, "spyder" clamps which connect between the MF-connectors and a rotule, and finally the rotules which hold the glass.
www.strudyna.com
STRUDYNA.commmm
R
Exclusive AgentsYear 2010
STRUDYNA (Thailand) CO.,LTDSathorn business park21/18 Krungthonburi Rd., KlongtonsaiKlongsaan Bangkok 10600 ThailandTel : +(66) 2862 2487Fax : +(66) 2862 2488Email : [email protected]
KENG WAH HARDWARE CO.PTE.LTD.BLK1, Maude Road#01-36/38200001 SingaporeTel : +(65) 6268 4729Fax : +(65) 6296 4736Email : [email protected]
BLAUMAR NAUTICA S.L.Juan Sebastian Elcano, 6APDO. 131 Javea (Alicante)3730 SpainTel : +(34) 96 646 1211Fax : +(34) 96 646 1213Email : [email protected]
ARCUS AUSTRALIA PTY LTDUnit 2, 6-8 Greenfield StBanksmeadow NSW 2019 AustraliaTel : +(61) 2 9666 5900Fax : +(61) 2 9666 5010Email : [email protected]
Structural Dynamics Europe Ltd10 Wingate Rd. Gosport, Hampshire.UK. PO12 4DPTel : +44 (0) 845 262 5557Fax : +44 (0) 239 294 0272Email : [email protected]
ANZOR FASTENERS LTD.8 Arrenway Drive Albany,Auckland, New ZealandTel : +(64) 9 476 0001Fax : +(64) 9 476 0090Email : [email protected]