STORM INTO - West-Trak Equipment Ltd nut runner to ensure correct shoe fitment and bolt torque...

IF IT DIGS, RIPS, HAULS, PULLS, PUSHES, SCOOPS OR TRACKS, WE’LL HAVE SOMETHING TO HELP. CHECK OUT WHAT’S ON AT WEST-TRAK, AND WARM UP WITH SOME WACKY WINTER DEALS!

INSIDE

FREECALL: 0800 654 323 EMAIL: [email protected] www.west-trak.co.nz

News & Promotions

STORM INTO

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FROM NOW TO AUGUST 31st 2016

......................................................

n BULK DEALS & SPECIALS Cutting Edges, Wear Strips, Track Shoes

n WEST-TRAK BUCKETS & Hammerless Bucket Teeth

n NEW PRODUCT RANGE Forest Machine Tracks

n UNDERCARRIAGE SERVICES We service what we sell

n JOIN US ON FACEBOOK and be in to win....

n EXCAVATOR RIPPERS Stronger & Tougher design

......................................................

......................................................

......................................................

......................................................

PLUS GET A FREE WEST-TRAK BEANIE WITH EVERY ORDER FROM THIS FLYER!(before 31st August 2016)

mailto:[email protected]

C U T T I N G E D G E & W E A R S T R I P D E A L S

Buy bulk &save at least 30%

SINGLE BEVEL, CUTTING EDGE PROFILES

G450 WEAR STRIPS

G400 Single Bevel Flat (SBF), weld-in cutting edges for all types and sizes of Excavator, Loader and Tractor Buckets.

n 110x12 SBF @ 6200mm long = $290.00 ea

n 150x16 SBF @ 6200mm long = $495.00 ea

n 150x20 SBF @ 6200mm long = $620.00 ea

Other profile sizes available on request

G450 Abrasion Resistant Wear Strips for Bucket and Blade Protection

Sold in packs of 10 at unrivalled prices!

n Pack of 10x G450-10 Wear Strips: 10mm x 75 x 2300 = $590.00



Other Wear Strip sizes available on request

CALL 0800 654 323 NOW TO DISCUSS YOUR NEEDS!

E X C A V A T O R T R A C K S H O E S P E C I A L S

Get a grip thisslippery season & save!BOOST YOUR TRACTION AND GO MORE PLACES WITH A NEW SET OF TRACK SHOES!

1 BAR SHOES - to fit the following machines

Cat 330 - 336 / SK290 - 3506I9893/600, 600mm, 1 Bar ESS, 14.5mm thick $75.00 ea

EX400 / ZX450 / Cat 345 / R520 / SH350IS3017V/600, 600mm, 1 Bar ESS, 16mm thick, $90.00 eaclipped corners


ZX200 - 250 / PC160-240 / R210 - 250KM1214/600, 600mm, 2 Bar ESS, 13mm thick $75.00 ea

PC300-5 / SH290 / EX300 / EC290 / R290ZV0652AON/600, 600mm, 2 Bar ESS, 14.5mm thick $75.00 ea


Cat 325 / SK270CR5449/600, 600mm, 3 Bar ESS, 13mm thick $60.00 ea

PC300 / ZX330 / R290KM2118/600E, 600mm, 3 Bar ESS, 13mm thick $65.00 ea

EX400 / ZX450 / Cat 345 / R520 / SH350KM1426/700E, 700mm, 3 Bar ESS, 16.5mm thick $50.00 ea

All prices are plus freight & GST, You must mention these prices when ordering to ensure you get the special price. Specials only while stocks last or untill 31st August 2016. All brand names, model names or marks are owned by their respective manufacturers. West-Trak has no affliation with the Original Equipment Manufacturers

(OEM). These terms are used for identification purposes only.

ONLY WHILE STOCK LASTS! GET IN FAST TO SECURE YOUR SET!

H A M M E R L E S S B U C K E T T E E T H

BOOST PRODUCTIVITY WITH THE STRONGEST, MOST DURABLE BUCKET YOU’VE EVER HAD!

H E A V Y D U T Y W E S T - T R A K B U C K E T S

More bang for your Bucket!

BETTER BUCKET SOLUTIONS FOR HEAVY MACHINERY THAT SIMPLY HAS TO WORK

n Built from Abrasion Resistant steels for maximum strength and wear life

n Improved design and performance benefits to enhance your machines productivity

n Fully Hammerless G.E.T system included for ultimate safety and reliability

n Any type of Bucket for any application, up to 400 tonne excavator size

n Guaranteed quality and full back up support with replacement wear parts in stock


READ ABOUT

Our bucket projects at www.west-trak.co.nz

MAXIMISE THE RETURN ON YOUR MACHINE INVESTMENT WITH THE WORLD’S SAFEST, MOST TRUSTED BUCKET TOOTH SYSTEM EVER!

H A M M E R L E S S B U C K E T T E E T H

UNRIVALLED STRENGTHS OF STARMET!n Up to 30% increase in wear life

n Increased safety with hammerless pins

n Guaranteed no loss of components

n Faster change over times

n No need to weld up adapter noses

Never lose a Bucket Tooth again!

Convert to STARMET Teeth today and SAVE!

Available for 20 to 400 tonne excavators and loaders

More than 250 machines have converted to this StarMet tooth system in NZ - find out why!

Read our customer case studies online at www.west-trak.co.nz/customers/


N E W R A N G E O F F O R E S T M A C H I N E T R A C K S

WEST-TRAK ARE APPROVED DISTRIBUTORS FOR CLARK FOREST MACHINE TRACKS

NEW for 2016

Clark Tracks have designed and manufactured a new and advanced track link. This new design features a new pin profile to maximise life and reduce maintenance through tensioning. The special profile of the side flanges reduce risk of links twisting whilst remaining tyre friendly.

n Enhanced design for improved work life

n Reduced risk of link twisting

n New pin profile reduces track maintenance

n Critical wear point increased to maximise work life

Patent Pending


Bigger & strongerForest Machine TracksLARGE RANGE OF HEAVY DUTY, CLARK TYRE TRACKS THAT ARE BIGGER, STRONGER AND LAST LONGER!

FULL RANGE OF DUAL AND SINGLE TYRE TRACKS TO FIT CATERPILLAR, KOMATSU, JOHN DEERE AND TIGERCAT FORESTRY MACHINES

HEAVY DUTY MULTI TERRIAN TRACK (FX)

These tracks are built for the heaviest Forwarders, working in the toughest terrain. Double Rocky spikes on each track pad are secure and extremely long lasting compared to standard spikes.

Grouzer Super Grip (GSG) is the single wheel track that delivers maximum climbing capability for 6-wheeled machines.

GSG’s give exceptional traction and require less maintenance than tyre chains.

A range of CLARK Tyre Chains are available for the most common Skidders and tyre sizes.

These are a studded, 2-Diamond, small ring chain and case hardened for longer service life, Designed for maximum durability and low maintenance, the open chain pattern knows no limits for terrain or climate

n Arguably the best multi-terrain tracks on the market

n All season use, for Winter and Summer performance

n Suitable for scarifying and skidder operations

STOCK DUE AUGUST 2016 CALL 0800 654 323 NOW TO SECURE YOUR SET!

ULTIMATE CLIMBING SINGLE TRACK (GSG)

SINGLE TYRE CHAINS NWS (net with studs)

Grip Flotation

Grip Flotation

Available for Harvesters,Skidders & Forwarders


U N D E R C A R R I A G E S E R V I C E S

We service what we sell

With our 400 tonne hydraulic track press, we can service up to D11 size Bulldozer chains and 200 tonne size Excavator chains for pin and bush turns and other repairs

We offer a fast and efficient service for bolting grouser shoes on to track chains, using a hydraulic nut runner to ensure correct shoe fitment and bolt torque settings are applied

Increase traction by sending us your old track shoes to weld on new Grouser Relug Bars

Free onsite Undercarriage, wear monitoring and reporting to help you plan for upcoming maintenance and track replacements

400 TONNE TRACK PRESS TRACK SHOE BOLT-UPS

TRACK SHOE RE-LUGGING WEAR MONITORING SERVICES

FULLY EQUIPPED WITH BACK UP SUPPORT SERVICES THAT COMPLIMENT OUR PRODUCT RANGE AND KEEP YOUR MACHINES ON TRACK


I T M T R A C K A D V I C E

Lack of undercarriage management can account for more than half of a machine’s maintenance costs. That’s why we offer a comprehensive programme to measure and monitor your undercarriage system.

The ITM Track Advice Management Systemuses the most advanced diagnostic equipment available, like the Ultrasonic Wear Indicator and mobile App.

With this technology, we can accurately monitor your undercarriage wear rates and remaining service life so you can plan maintenance, and schedule downtime easily.

The wear analysis can be completed on site, providing real-time data that will help you make informed decisions.

Free wear monitoringof your UndercarriageWE CAN MONITOR YOUR UNDERCARRIAGE WEAR PERFORMANCE TO HELP PLAN FOR UPCOMING REPLACEMENTS AND PREVENT UNEXPECTED BREAKDOWNS


E X C A V A T O R R I P P E R S H A N K S

CUSTOM DESIGNED AND ENGINEERED RIPPER ASSEMBLIES TO SUIT 10-200 TONNE SIZE EXCAVATORS

Rip into it

n Available for all makes and models of Excavators in rock, demolition and tree stump applications

n Made from G450 Abrasion Resistant steels for maximum strength and wear life n Correct ripping angle and shank curve for increased penetration and effective ripping performance

n Pin-on or weld-on shank protectors can be fitted for extra wear protection

n Supplied as individual shanks or complete ripper and mount assemblies

n Options of fixed pins for quick-hitch mounting or removable pins for direct attachment to your dipper arm

n Hammerless Ripper Teeth option for greater safety and reliability

Call 0800 654 323


for your ultimate ripping solutions

J O I N U S O N F A C E B O O K A N D W I N

Win a construction dinnerset for your little worker

MAKE EVERY MEAL A CONSTRUCTION SITE OF CREATIVITY WITH THIS FUN, AWARD-WINNING DINNER SET

n With a bulldozer pusher, forklift fork, wheel loader spoon and work site inspired dinner mat, your little worker will always be excited to clean their plate

There are FIVE dinner sets to give awayJust like a competition post on our Facebook page and you’re in the draw. (Terms and Conditions apply) BE IN TO WIN

DRAW CLOSES 26TH AUGUST 2016facebook.com/WestTrakEquipment


DOWNLOADour full product range online!Visit our “Downloads” page at www.west-trak.co.nz/downloads/ to see our complete range of products and services

Contact us today for your wear part needs and get a FREE WEST-TRAK BEANIE with every order from this flyer, until August 31st 2016!

Get in touch with West-Trak today. Call 0800 654 323

STORM INTO - West-Trak Equipment Ltd nut runner to ensure correct shoe fitment and bolt torque...

Documents

Transcript of STORM INTO - West-Trak Equipment Ltd nut runner to ensure correct shoe fitment and bolt torque...