STONE WORKS Working Ideas MBS - Achilli USA · STONE WORKS Working Ideas Bridge Saw MBS 3000 Sawing...
Transcript of STONE WORKS Working Ideas MBS - Achilli USA · STONE WORKS Working Ideas Bridge Saw MBS 3000 Sawing...
STONE WORKSWorking Ideas
Bridge SawMBS
3000Sawing machine with mobile
bridge for cutting marble & granite slabs
New!!
Working IdeasMACCHINE LAVORAZIONE MARMI E GRANITI
Achilli s.r.l.Via Montescudo, 14847900 Rimini (Italia)Tel. 0541-38.70.66Fax [email protected]
GE
NE
RA
L FE
AT
UR
ES
02
Bridge Saw MBS 3000Sturdy and compact structure (no foundations required).•Epoxy powder painting.•Head travel is motorized on three axes:•
X-axis (longwise) 3065 mm (10 ft)Y-axis (crosswise) 1930 mm (6 ft)Z-axis (vertical) 350 mm (13-3/4 in)
Manualmainmotorrotationat4fixedorthogonalpositions.•Manual head tilt to carry out angled cutting (from 90° to 45°).•Fixed worktable 3850x2200 mm (12,6 x 7,2 ft) in size covered with replaceable•marine plywood.Left shoulder built-in toolbox .•Main motor variable speed by inverter (optional).•Motorized hydraulic “pop-up” roller table with multidirectional rollers to facilitate•slab loading and positioning (optional).Laser cutting guide (20 mW) mounted on the blade guard (optional).•Optional water tank with built-in recycling pump.•Optional pendant control unit.•
Bridge Saw MBS 3000
MAIN ELECTRIC PANEL:
Main isolator switch.•Emergency stop push-button.•“RESET” power-on button.•
MOBILE PANEL:Emergency stop push-button.•Main motor start/stop button.•X and Y-axis selector.•5 buttons to control forward, stop and reverse of X and Y-axes.•2 variable speed controls for X-axis (head forward-reverse).•2 variable speed controls for Y-axis (bridge forward-reverse).•1 variable speed control for Z-axis (main motor raise-lower).•3 counter “RESET” buttons for X, Y and Z-axes travel displays.•2 buttons for blade raise / lower.•2 buttons for roller table raise and lower control (optional).•2 buttons for tilt table raise /lower (optional).•1 laser switch (optional).•
PENDANT CONTROL (OPTIONAL):Main motor stop button.•6 control buttons for X, Y and Z-axes positioning.•1 selector for X and Y-axis.•
CONTROLS
03
Total power installed 9,00 kW (12HP)
Main motor (standard) Three-phasePower 7,5 kW (10HP)•Voltage 400 V~•Frequency 50 Hz•Rotation speed 1400 RPM•
Main motor (optional) Three-phasePower 11 kW (15HP)•Voltage available upon request•Frequency available upon request•Rotation speed 1400 RPM (at 50 Hz)•
Head and bridge feed motors Three-phase Power 0,37 kW (0,5HP)•Voltage 230 V~•Frequency 50 Hz•Variable speed by inverter from 0 to 7 m/min (0 to 23 ft/min)•(forward and reverse)
Raise and lower motor Three-phasePower 0,18 kW (0,24HP)•Voltage 230 V~•Frequency 50 Hz•Variable speed by inverter from 0 to 0,4 m/min (0 to 1,3 ft/min)•
Motor for hydraulic lifting unit (optional) Three-phasePower 0,18 kW (0,24HP)•Voltage 400/230 V~•Frequency 50/60 Hz•
Water recycling pump (optional) Single-phasePower 0,5 kW (0,7HP)•Voltage 230 V~•Frequency 50 Hz•Max. capacity 250 l/min (66 gal/min)•
Motorized hydraulic tilting of the slab loader(optional)
03
Shipping dimensions with packing:(length x width x height)
4320 x 2213 x 2600 mm (14,2 x 7,3 x 8,5 ft)With wheels for transportation
4320 x 2213 x 2400 mm (14,2 x 7,3 x 7,9 ft)Without wheels for transportation
Dimensions of installed machine:(length x width x height)4320 x 3800 x 2400 mm (14,2 x 12,5 x 7,9 ft)
DIM
EN
SIO
NS
Bridge Saw MBS 3000
Note: (**) Distance with Y-axis extensions installed (optional).
ME
CH
AN
ICA
L D
ATA Maximum diamond blade diameter Ø 500 mm (20”)•
bore 50 mm (2”)Blade peripheral speed (50 Hz) 36,6 m/sec (120 ft/sec)•Blade periperal speed (60 Hz) 44,5 m/sec (146 ft/sec)•Cutting depth with a Ø 500 mm blade 150 mm (5-7/8 in)•Manual head tilt from 90° to 45°•Manual main motor rotation with 4 locking positions 0° - 90° - 180° - 270°•Net weight of machine without accessories 1555 kg (3428 lb)•Water tank capacity (optional) 470 l. approx.(124.2 gal)•
Abovetechnicaldataareindicative.Manufacturerreservestherighttocarryoutmodificationswithout notice.
AC
CE
SS
OR
IES
INCLUDED:Service wrenches.•
OPTIONAL:11 kW (15 HP) 3-phase main motor.•Main motor variable speed with inverter.•Y-axis extensions for extra working area.•Motorized hydraulic “pop-up” roller table with multidirectional rollers to •facilitate slab loading and positioning.Water tank with built-in recycling pump.•Motorized hydraulic tilting slab loader.•Corded or wireless pendant control unit.•Laser cutting device.•X-axis bellows • (*).Shoulder splash-guards.•
3885 mm (12,7 ft)
500
mm
(20
in)
330
mm
(13
in)
170m
m 1
57m
m(6
,7 in
) (6
,2 in
)
4349 mm (14,3 ft)
Note: (*) Bellows installment reduces the head travel of 150 mm (5-7/8 in).
803
mm
(2,6
ft)
2400
mm
(7,9
ft)
2703 mm (7,3 ft) (**)
2213 mm (7,3 ft)
1100 mm(3,6 in)
300 mm(11,8 in)