Stellar Service Crane EC6000 · 2018-06-19 · NOTE: All Stellar® cranes meet ANSI B30.5 and OSHA...
Transcript of Stellar Service Crane EC6000 · 2018-06-19 · NOTE: All Stellar® cranes meet ANSI B30.5 and OSHA...
TECHNICAL SPECIFICATION GUIDE
Stellar® Service Crane
EC6000
Our People. Our Products.
EC6000
SPECIFICATION INFORMATION
Crane Rating: 38,000 ft-lbs (5.25 ton-meters)Standard Boom Length: 11’ (3.35 m) from CL of Crane
Boom Extension: • 1st stage: Hydraulic 60” (152.4 cm) • 2nd stage: Manual 60” (152.4 cm)
Max. Horizontal Reach: 21’ (6.40 m) from CL of Crane
Maximum Vertical Lift: 22’ 10” (6.96 m)(from crane base)
Boom Elevation: -5 to +80 degree
Stowed Height: 34.41” (87.40 cm)(crane only)
Mounting Space Required: 20” x 21” (50.8 x 53.3 cm)
Shipping Weight: 1600 lbs (725 kg)
Controls: Radio control standard for all functionsWinch • Rope Length: 90’ (27.4 m) • Rope Diameter: 5/16” (.79 cm) • Line pull speed: 16 ft/min (4.88 m/min) • Max. single part line: 3000 lbs (1360 Kg) • Max. double part line: 6000 lbs (2720 Kg)
Rotation: 400 degree power (worm gear)
Lifting Capacities: 6000 lbs @ 6’4” (2720 Kg @ 1.9 m) 1810 lbs @ 21’ (820 Kg @ 6.4 m)
Power Supply Required: 12 volt power unit 2.0 gpm @ 2900 psi (7.57 lpm @ 200 bars)
Min. Rec. Chassis (GVRW) 16,000
NOTE: All Stellar® cranes meet ANSI B30.5 and OSHA 1910.180 specifications.Specifications subject to change without notification.
TECHNICAL SPECIFICATION GUIDE
DEFINING CHARACTERISTICS
Planetary Drive Winch System The winch is equipped with a 2.5 HP permanent magnet electric motor with a 199:1 planetary gear reduction system. This ensures that your winch will never quit lifting before it reaches the full rated capacity.
Double Boom Design The double boom design makes it nearly twice as strong as the nearest competitor.
Gear Bearing RotationNo plastic bushings or brass gears in the rotation system. It uses a high strength steel ball bearing turntable gear, a high strength steel worm gear, and a cast steel worm gear housing.
Integral Rotation Stop400 degrees of rotation with an integrated rotation stop. Integrated stops allow the best performance while protecting wires and hoses from damage.
21’ of ReachHydraulic 1st stage extension. Manual 2nd stage extension.
Radio RemoteComes standard with a radio remote control.
Environmentally Friendly Hydraulic Oil Stellar Industries uses environmentally friendlyhydraulic oil in their EC Series of cranes, that is non-toxic, non-carcinogenic and that is recyclable and biodegradable.
EC6000
MotorØ1.063
7.38
14.75
7.38
14.75
Ø6.00
4 Places
14432
ITEM NO. PART NO.1 5199
QTY.
WASHER 1.00 FLAT ZINCCAP SCR 1.00X8X3.00 HHGR8 ZYDESCRIPTION
44
stellarindustries.com
Weight of load handling devices are part of the load lifted and must be deducted from the capacity.
Maximum 1 - part line capacity is 3000 lbs. (1360 kg). For greater loads, use 2 - part line.
EC6000 CAPACITY CHART
ROTATIONAL CLEARANCE HOLE MOUNTING DETAIL
GEOMETRIC DIMENSIONS
Reach in Feet/MetersCapacity in Pounds/Kilograms
Weight of load handling devices are part of the load lifted and must be deducted from the capacity.
Maximum 1 - part line capacity is 3000 lbs (1360 kg). For greater loads,use 2 - part line.
3'0'
75º
60º
6000 lbs
6000 lbs
6000 lbs
80º
16' 21'
0'
9'6' 11'
1810 lbs3450 lbs
15º
30º
2375 lbs
45º
3'
6'
9'
12'
15'
18'
22'10"
.914 m 1.83m 2.74m 3.35m 4.87m 6.40m
.914 m
1.83m
2.74m
4.57m
5.49m
3.66m
6.96m
1560 kg 1075 kg 820 kg
2720 kg
2720 kg
2720 kg 6000 lbs2720 kg
6000 lbs2720 kg
6000 lbs2720 kg
6000 lbs2720 kg
3560 lbs1610 kg
1795 kg3965 lbs
4845 lbs2195 kg
1110 kg2450 lbs
2730 lbs1235 kg
1510 kg3340 lbs
4715 lbs2135 kg
1870 lbs845 kg
2080 lbs940 kg
2545 lbs1150 kg
1630 kg3600 lbs
30.38” (77.17 cm)®
136.72
36.69
18.06
CG
24.7721.42
34.41
149.74
190 State StreetP.O. Box 169
Garner, IA 50438Telephone: (641) 923-3741 • (800) 321-3741
Fax: (641) 923-2812Internet: www.stellarindustries.comEmail: [email protected]
An Employee Owned Company.Copyright © 2018 Stellar Industries, Inc.
STL000074 6/18
Our People. Our Products.
®Your local distributor:
For the most up to date version of this brochure, please visit www.stellarindustries.com.
2
Item Part Description Qty.
1
2
42985
8648
Cap Scr 0.88-9x1.75 HHGR8ZY 4
4Washer 0.88 SAE GR8
1
SERVICE BODY MOUNTMounts on 20” deep (or larger) side packs.