Standards Update
4
Page 1 January 2015 (Click here for latest edition) This update gives you a listing of all Australian Standards ® , draft standards, amendments and other publications issued in January 2015. To help you identify publications of interest, there are three separate listings: Standards Australia publications grouped according to subject, based on the International Classification System. Standards Australia publications, by type, listed in numerical order. Publications from SAI Global, listed in numerical order. For full details of each document, click on link provided or, if you are working off a paper copy, go to infostore.saiglobal.com/store and key in the reference number. Subjects covered by this month's publications (Section Links) 03 - SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY. ADMINISTRATION. TRANSPORT. SOCIOLOGY 13 - ENVIRONMENT. HEALTH PROTECTION. SAFETY 25 - MANUFACTURING ENGINEERING 29 - ELECTRICAL ENGINEERING 31 - ELECTRONICS 33 - TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING 47 - SHIPBUILDING AND MARINE STRUCTURES 77 - METALLURGY 83 - RUBBER AND PLASTIC INDUSTRIES 91 - CONSTRUCTION MATERIALS AND BUILDING 97 - DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT. SPORTS Standards Australia publications by subject matter 03 - SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY. ADMINISTRATION. TRANSPORT. SOCIOLOGY AS/NZS 5121:2015 Information technology - Vocabulary - Learning, education and training Adopts ISO/IEC 2382-36:2013 to present terms and definitions of selected concepts relevant to the field of information technology for learning, education, and training and identifies relationships among the entries. Intended to facilitate communication in information technology for learning, education, and training. > Click for further information AS/NZS IEC 60300.1:2015 Dependability management - Guidance for management and application Adopts IEC 60300-1:2014 to provide guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. > Click for further information AS/NZS IEC 62198:2015 Managing risk in projects - Application guidelines > Click for further information DR AS 11000:2015 General conditions of contract > Click for further information 13 - ENVIRONMENT. HEALTH PROTECTION. SAFETY DR AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - Total suspended particulate matter (TSP) - High volume sampler gravimetric method > Click for further information DR AS/NZS 3580.9.6:2015 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 high volume sampler with size selective inlet - Gravimetric method > Click for further information DR AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method > Click for further information DR AS 4758.1:2015 Lifejackets - General requirements > Click for further information DR AS 4758.2:2015 Lifejackets - Materials and components - Requirements and test methods > Click for further information
description
Standards Update
Transcript of Standards Update
Page 1
January 2015 (Click here for latest edition)
This update gives you a listing of all Australian Standards®, draft standards, amendments and other
publications issued in January 2015.
To help you identify publications of interest, there are three separate listings:
Standards Australia publications grouped according to subject, based on the International Classification System.
Standards Australia publications, by type, listed in numerical order.
Publications from SAI Global, listed in numerical order.
For full details of each document, click on link provided or, if you are working off a paper copy, go to
infostore.saiglobal.com/store and key in the reference number.
Subjects covered by this month's publications (Section Links)
03 - SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY.
ADMINISTRATION. TRANSPORT. SOCIOLOGY
13 - ENVIRONMENT. HEALTH PROTECTION. SAFETY
25 - MANUFACTURING ENGINEERING 29 - ELECTRICAL ENGINEERING
31 - ELECTRONICS
33 - TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING
47 - SHIPBUILDING AND MARINE STRUCTURES
77 - METALLURGY
83 - RUBBER AND PLASTIC INDUSTRIES
91 - CONSTRUCTION MATERIALS AND BUILDING
97 - DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT. SPORTS
Standards Australia publications by subject matter
03 - SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY. ADMINISTRATION. TRANSPORT. SOCIOLOGY
AS/NZS 5121:2015 Information technology - Vocabulary - Learning,
education and training Adopts ISO/IEC 2382-36:2013 to present terms and definitions of selected concepts relevant to the field of information technology for learning, education, and training and identifies relationships among the entries. Intended to facilitate communication in information technology for learning, education, and training.
> Click for further information
AS/NZS IEC 60300.1:2015
Dependability management - Guidance for management and application Adopts IEC 60300-1:2014 to provide guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements.
> Click for further information
AS/NZS IEC 62198:2015 Managing risk in projects - Application guidelines
> Click for further information
DR AS 11000:2015
General conditions of contract
> Click for further information
13 - ENVIRONMENT. HEALTH PROTECTION. SAFETY
DR AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - Total suspended particulate matter (TSP) - High volume sampler gravimetric method
> Click for further information
DR AS/NZS 3580.9.6:2015 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 high volume sampler with size selective inlet - Gravimetric method
> Click for further information
DR AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method
> Click for further information
DR AS 4758.1:2015 Lifejackets - General requirements
> Click for further information
DR AS 4758.2:2015 Lifejackets - Materials and components - Requirements and test methods
> Click for further information
Page 2
DR AS 4758.3:2015
Lifejackets - Test methods
> Click for further information
25 - MANUFACTURING ENGINEERING
AS 2832.1:2015 Cathodic protection of metals - Pipes and cables Specifies requirements for the cathodic protection of buried or submerged metallic pipes and cables. This Standard does not apply to offshore submarine pipelines.
> Click for further information
29 - ELECTRICAL ENGINEERING
AS/NZS 3117:2015 Approval and test specification - Bayonet
lampholders Specifies requirements and tests for 2-slot or 3-slot, or both, B22 bayonet lampholders and for bayonet lampholders of the B15 (small) designation which are intended for use in low-voltage circuits.
> Click for further information
AS IEC 62271.4:2015 High-voltage switchgear and controlgear -
Handling procedures for sulphur hexafluoride (SF6) and its mixtures Adopts IEC 62271-4:2013 to provide procedures for handling of SF6 during installation, commissioning, normal and abnormal operations, and disposal at the end-of-life of high-voltage switchgear and controlgear.
> Click for further information
AS IEC 62271.105:2015
High-voltage switchgear and control gear - Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV Adopts IEC 62271-105:2012 to specify requirements for three-pole units for public and industrial distribution systems, which are functional assemblies of switches including switch-disconnectors and current limiting fuses.
> Click for further information
31 - ELECTRONICS
AS/NZS IEC 60300.1:2015 Dependability management - Guidance for management and application Adopts IEC 60300-1:2014 to provide guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements.
> Click for further information
33 - TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING
DR AS/NZS 1367:2015 Coaxial cable and optical fibre systems for the RF distribution of digital television, radio and in-house analog television signals in single and multiple dwelling installations
> Click for further information
DR AS/NZS 4295:2015
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz
> Click for further information
47 - SHIPBUILDING AND MARINE STRUCTURES
DR AS 4758.1:2015 Lifejackets - General requirements
> Click for further information
DR AS 4758.2:2015 Lifejackets - Materials and components - Requirements and test methods
> Click for further information
DR AS 4758.3:2015 Lifejackets - Test methods
> Click for further information
77 - METALLURGY
AS 2832.1:2015 Cathodic protection of metals - Pipes and cables Specifies requirements for the cathodic protection of buried or submerged metallic pipes and cables. This Standard does not apply to offshore submarine pipelines.
> Click for further information
83 - RUBBER AND PLASTIC INDUSTRIES
DR AS/NZS 3813:2015 Plastic monobloc chairs - Determination of strength and durability, stability, UV and
weathering, and ignitability
> Click for further information
91 - CONSTRUCTION MATERIALS AND BUILDING
DR AS 1012.20.2:2015 Methods of testing concrete - Determination of water-soluble chloride in aggregates and hardened concrete
> Click for further information
DR AS 2758.7:2015
Aggregates and rock for engineering purposes - Railway ballast
> Click for further information
97 - DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT. SPORTS
DR AS/NZS 3813:2015 Plastic monobloc chairs - Determination of
strength and durability, stability, UV and
weathering, and ignitability
> Click for further information
DR AS 4758.1:2015 Lifejackets - General requirements
> Click for further information
DR AS 4758.2:2015 Lifejackets - Materials and components - Requirements and test methods
> Click for further information
DR AS 4758.3:2015 Lifejackets - Test methods
> Click for further information
Page 3
Standards Australia publications in numerical order
Standards
AS 2832.1:2015 Cathodic protection of metals - Pipes and cables
AS/NZS 3117:2015 Approval and test specification - Bayonet lampholders
AS/NZS 5121:2015 Information technology - Vocabulary - Learning, education and training
AS/NZS IEC 60300.1:2015 Dependability management - Guidance for management and application
AS/NZS IEC 62198:2015 Managing risk in projects - Application guidelines
AS IEC 62271.4:2015 High-voltage switchgear and controlgear - Handling procedures for sulphur
hexafluoride (SF6) and its mixtures
AS IEC 62271.105:2015 High-voltage switchgear and control gear - Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
Drafts
DR AS 1012.20.2:2015
Methods of testing concrete - Determination of water-soluble chloride in aggregates and hardened concrete
DR AS/NZS 1367:2015 Coaxial cable and optical fibre systems for the RF distribution of digital television, radio and in-house analog television signals in single and multiple dwelling installations
DR AS 2758.7:2015 Aggregates and rock for engineering purposes - Railway ballast
DR AS/NZS 3580.9.3:2015
Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - Total suspended particulate matter (TSP) - High volume sampler gravimetric method
DR AS/NZS 3580.9.6:2015 Methods for sampling and analysis of ambient air - Determination of suspended
particulate matter - PM10 high volume sampler with size selective inlet - Gravimetric method
DR AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method
DR AS/NZS 3813:2015 Plastic monobloc chairs - Determination of strength and durability, stability, UV and
weathering, and ignitability
DR AS/NZS 4295:2015 Analogue speech (angle modulated) equipment operating in land mobile and fixed
services bands in the frequency range 29.7 MHz to 1 GHz
DR AS 4758.1:2015 Lifejackets - General requirements
DR AS 4758.2:2015 Lifejackets - Materials and components - Requirements and test methods
DR AS 4758.3:2015 Lifejackets - Test methods
DR AS 11000:2015 General conditions of contract
Page 4
Help and Information
Draft Standards
Draft Australian Standards are generally open for comment for two or three months after their publication date. During this comment period, the great majority of them are available free of charge if downloaded direct from the SAI Global Infostore.
Amendments
With a handful of exceptions, Amendments to Australia Standards are free of charge if downloaded from the SAI Global Infostore. Use this archive to check if a current Standard has been amended.
Copyright Information
Australian Standards® is the registered trade mark of Standards Australia Limited. Australian Standards® standards and other publications are distributed by SAI Global under licence.
Buying Information
Web infostore.saiglobal.com/store
Phone 131 242 (Overseas +612 8206 6010)
Fax 1300 65 49 49 (Overseas +612 8206 6020)
Mail SAI Global Ltd, GPO Box 5420, Sydney NSW 2001, Australia
Sales Outlet
85 Buckhurst Street, South Melbourne VIC 3205
©SAI Global Limited ABN 67 050 611 642
