Standards Online Library accessible through … Catalogue Nov 2017.pdf · AS/NZS 1170.2:2011...
Transcript of Standards Online Library accessible through … Catalogue Nov 2017.pdf · AS/NZS 1170.2:2011...
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
Last updated: November 2017
STANDARD REFERENCE STANDARD TITLE
SAA/SNZ HB 1:1994 Technical drawing for students
AS/NZS 1080.1:2012 Timber - Methods of test - Method 1: Moisture content
AS/NZS ISO 10984.1:2015 Timber structures - Dowel-type fasteners - Part 1: Determination of yield moment
AS/NZS ISO 10984.2:2015 Timber structures - Dowel-type fasteners - Part 2: Determination of embedding strength
NZS/AS 1100.301 Supplement 1:1986 Technical drawing - Architectural drawing - Architectural drawings
NZS/AS 1100.301:1985 Technical drawing - Architectural drawing
AS/NZS 1100.501:2002 Technical drawing - Structural engineering drawing
AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords
SAA/SNZ HB 114:1998 Guidelines for design of eaves and box gutters
AS/NZS 1148:2001 Timber - Nomenclature - Australian, New Zealand and imported species
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS/NZS 1170.0 Supplement 1:2002 Structural design actions - Part 0: General principles - Commentary
AS/NZS 1170.0:2002 Structural design actions - Part 0: General principles
AS/NZS 1170.1 Supplement 1:2002
Structural design actions - Part 1: Permanent, imposed and other actions - Commentary (Supplement to AS/NZS
1170.1:2002)
AS/NZS 1170.1:2002 Structural design actions - Part 1: Permanent, imposed and other actions
AS/NZS 1170.2:2011 Structural design actions - Part 2: Wind actions
AS/NZS 1170.3 Supplement 1:2003 Structural design actions - Part 3: Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003)
AS/NZS 1170.3:2003 Structural design actions - Part 3: Snow and ice actions
NZS 1170.5 Supp 1:2004 Structural design actions - Part 5: Earthquake actions - New Zealand Commentary
NZS 1170.5:2004 Structural design actions - Part 5:Â Earthquake actions - New Zealand
AS/NZS 1221:1997 Fire hose reels
AS/NZS 1229:2002 Laundry troughs and tubs
AS/NZS 1252.1:2016
High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 1: Technical
requirements
AS/NZS 1252.2:2016
High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 2: Verification testing
for bolt assemblies
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS/NZS 1314:2003 Prestressing anchorages
AS/NZS 1328.1:1998 Glued laminated structural timber - Performance requirements and minimum production requirements
Standards Online Library
accessible through www.masterspec.co.nz
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 1328.2:1998
Glued laminated structural timber - Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of
glued laminated structural timber
NZS/BS 1387:1985
Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for
screwing to BS 21 pipe threads
AS/NZS 1388:1994 Guidelines for technical information for building and construction products
AS/NZS 1428.4.1:2009
Design for access and mobility - Part 4.1: Means to assist the orientation of people with vision impairment - Tactile
ground surface indicators
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS/NZS 1491:1996 Finger jointed structural timber
AS/NZS CISPR 15:2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
AS/NZS ISO/IEC 15018:2005 Information technology - Generic cabling for homes
AS/NZS 1516:1994 The cement mortar lining of pipelines in situ
NZS/AS 1530.1:1994 Methods for fire tests on building materials, components and structures - Combustibility test for materials
NZS/AS 1530.2:1993 Methods for fire tests on building materials, components and structures - Test for flammability of materials
AS/NZS 1530.3:1999
Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability,
flame propagation, heat release and smoke release
AS/NZS 1530.7:1998
Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies -
Ambient and medium temperature leakage test procedure
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units - Septic tanks
AS/NZS 1546.2:2008 On-site domestic wastewater treatment units - Waterless composting toilets
AS/NZS 1546.3:2008 On-site domestic wastewater treatment units - Aerated wastewater treatment systems
AS/NZS 1547:2012 On-site domestic wastewater management
AS/NZS 1554.1:2014 Structural steel welding - Part 1: Welding of steel structures
AS/NZS 1554.2:2003 Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.3:2014+A1 Structural steel welding - Part 3: Welding of reinforcing steel
AS/NZS 1554.4:2014 Structural steel welding -Â Part 4: Welding of high strength quenched and tempered steels
AS/NZS 1554.5:2014 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.6:2012 Structural steel welding - Part 6: Welding stainless steels for structural purposes
AS/NZS 1554.7:2014 Structural steel welding - Part 7: Welding of sheet steel structures
AS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower construction
AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced cement
AS/NZS 1562.3:1996 Design and installation of sheet roof and wall cladding - Plastic
AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections
AS/NZS 1576.1:2010 Scaffolding - Part 1: General requirements
AS/NZS 1576.2:2016 Scaffolding - Part 2: Couplers and accessories
AS/NZS 1576.3:2015 Scaffolding - Part 3: Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.4:2013 Scaffolding - Part 4: Suspended scaffolding
AS/NZS 1576.5:1995 Scaffolding - Prefabricated splitheads and trestles
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 1576.6:2000 Scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3
AS/NZS 1577:2013 Scaffold decking components
AS/NZS 1580.108.1:1994
Methods of test for paints and related materials - Determination of dry film thickness on metallic substrates - Non
destructive methods
AS/NZS 1596:2014 The storage and handling of LP Gas
AS/NZS 1604.2:2012 Specification for preservative treatment - Part 2: Reconstituted wood-based products
AS/NZS 1604.3:2012 Specification for preservative treatment - Part 3: Plywood
AS/NZS 1604.4:2012 Specification for preservative treatment - Part 4: Laminated veneer lumber (LVL)
AS/NZS 1604.5:2012 Specification for preservative treatment - Part 5: Glued laminated timber products
AS/NZS 1605.1:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber - General requirements,
sampling, and determination of sapwood and heartwood presence
AS/NZS 1605.2:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber - Determination of
preservative penetration by spot tests
AS/NZS 1605.3:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber - Analysis methods for
determination of preservative retention
AS/NZS 1605.4:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber - Analysis methods for
determination of preservative solution concentration
NZS/AS 1657:1992 Fixed platforms, walkways, stairways and ladders. Design, construction and installation
AS/NZS 1660.5.3:1998
Test methods for electric cables, cords and conductors - Fire tests - Determination of the amount of halogen acid gas
evolved during the combustion of polymeric materials taken from cables
AS/NZS 1660.5.4:1998
Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved
during the combustion of materials taken from electric cables by measuring pH and conductivity
AS/NZS 1664.1 Supplement 1:1997 Aluminium structures - Limit state design - Commentary
AS/NZS 1664.1:1997 Aluminium structures - Limit state design
AS/NZS 1664.2 Supplement 1:1997 Aluminium structures - Allowable stress design - Commentary
AS/NZS 1664.2:1997 Aluminium structures - Allowable stress design
AS/NZS 1665:2004 Welding of aluminium structures
AS/NZS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
AS/NZS 1680.0:2009 Interior lighting - Safe movement
AS/NZS 1680.1:2006 Interior and workplace lighting - Part 1: General principles and recommendations
AS/NZS 1680.2.1:2008 Interior and workplace lighting - Part 2.1: Specific applications - Circulation spaces and other general areas
AS/NZS 1680.2.2:2008 Interior and workplace lighting - Part 2.2: Specific applications - Office and screen-based tasks
AS/NZS 1680.2.3:2008 Interior and workplace lighting - Part 2.3: Specific applications - Educational and training facilities
AS/NZS 1680.2.4:2017 Interior and workplace lighting - Part 2.4: Industrial tasks and processes
AS/NZS 1680.2.5:1997 Interior lighting - Part 2.5: Hospital and medical tasks
AS/NZS 1680.4:2017 Interior and workplace lighting - Part 4: Maintenance of electric lighting systems
AS/NZS 1730:1996 Washbasins
AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheets, coiled sheet and plate
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 1735.18.2002 Lifts, escalators and moving walks (SAA Lift Code) - Passenger lifts for private residence - Automatically controlled
AS/NZS 1748.1:2011 Timber - Solid - Stress-graded for structural purposes - General requirements
AS/NZS 1748.2:2011 Timber - Solid - Stress-graded for structural purposes - Qualification of grading method
AS/NZS 1841.1:2007 Portable fire extinguishers - General requirements
AS/NZS 1841.2:2007 Portable fire extinguishers - Specific requirements for water type extinguishers
AS/NZS 1841.3:2007 Portable fire extinguishers - Specific requirements for wet chemical type extinguishers
AS/NZS 1841.4:2007 Portable fire extinguishers - Specific requirements for foam type extinguishers
AS/NZS 1841.5:2007 Portable fire extinguishers - Specific requirements for powder type extinguishers
AS/NZS 1841.6:2007 Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
AS/NZS 1841.7:2007 Portable fire extinguishers - Specific requirements for vaporizing liquid type extinguishers
AS/NZS 1841.8:2007 Portable fire extinguishers - Specific requirements for non-rechargeable type extinguishers
AS/NZS 1850:2009 Portable fire extinguishers - Classification, rating and performance testing
AS/NZS 1859.1:2017 Reconstituted wood-based panels - Specifications -Â Part 1: Particleboard
AS/NZS 1859.2:2017 Reconstituted wood-based panels - Specifications - Part 2: Dry process fibreboard
AS/NZS 1859.3:2017 Reconstituted wood-based panels - Specifications - Part 3: Decorative overlaid wood panels
AS/NZS 1859.4:2004 Reconstituted wood-based panels - Specifications - Wet-processed fibreboard
AS/NZS 1860.1:2002 Particleboard flooring - Part 1: Specifications
AS/NZS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
NZS AS 1884:2013 Floor coverings - Resilient sheet and tiles - Installation practices
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment
AS/NZS 1891.2 Supplement 1:2001
Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems - Prescribed configurations for horizontal
lifelines (Supplement to AS/NZS 1891.2:2001)
AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systems
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Part 3: Fall-arrest devices
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices - Part 4: Selection, use and maintenance
AS/NZS 1905.1:1997 Components for the protection of openings in fire-resistant walls - Fire-resistant doorsets
AS/NZS 2023:1995 Baths for ablutionary purposes
AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS/NZS 2041.4:2010 Buried corrugated metal structures - Helically formed sinusoidal pipes
AS/NZS 2053.1:2001 Conduits and fittings for electrical installations - General requirements
AS/NZS 2053.2:2001 Conduits and fittings for electrical installations - Rigid plain conduits and fittings of insulating material
AS/NZS 2053.3:1995 Conduits and fittings for electrical installations - Rigid plain conduits and fittings of fibre-reinforced concrete material
AS/NZS 2053.4:1995 Conduits and fittings for electrical installations - Flexible plain conduits and fittings of insulating material
AS/NZS 2053.5:2001 Conduits and fittings for electrical installations - Corrugated conduits and fittings of insulating material
AS/NZS 2053.6:2001 Conduits and fittings for electrical installations - Profile-wall, smooth-bore conduits and fittings of insulating material
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2053.7:2002 Conduits and fittings for electrical installations - Rigid metal conduits and fittings
AS/NZS 2053.8:1995 Conduits and fittings for electrical installations - Flexible conduits and fittings of metal or composite material
AS/NZS 2097:2006 Methods for sampling veneer and plywood
AS/NZS 2098.0:2006 Methods of test for veneer and plywood - General introduction and list of methods
AS/NZS 2098.1:2006 Methods of test for veneer and plywood - Moisture content of veneer and plywood
AS/NZS 2098.11:2005 Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood
AS/NZS 2098.2:2012 Methods of test for veneer and plywood - Method 2: Bond quality of plywood (chisel test)
AS/NZS 2098.3:2006 Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood
AS/NZS 2098.4:2006 Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and plywood
AS/NZS 2098.5:2006 Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by micro-organisms
AS/NZS 2098.6:2006 Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywood
AS/NZS 2098.7:2006 Methods of test for veneer and plywood - Density of veneer and plywood
AS/NZS 2098.8:2006 Methods of test for veneer and plywood - Water absorption and thickness swelling of unpainted plywood
NZS/BS 21:1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
AS/NZS 2107:2016 Acoustics - Recommended design sound levels and reverberation times for building interiors
AS/NZS 2179.1:2014
Specifications for rainwater goods, accessories and fasteners - Part 1: Metal shape or sheet rainwater goods, and metal
accessories and fasteners
AS/NZS 2201.1:2007 Intruder alarm systems - Client's premises - Design, installation, commissioning and maintenance
AS/NZS 2208:1996 Safety glazing materials in buildings
AS/NZS 2243.1:2005 Safety in laboratories - Planning and operational aspects
AS/NZS 2243.8:2014 Safety in laboratories - Part 8: Fume cupboards
AS/NZS 2269.0:2012 Plywood - Structural - Part 0: Specifications
AS/NZS 2269.1:2012 Plywood - Structural - Part 1: Determination of structural properties - Test methods
AS/NZS 2269.2:2007 Plywood - Structural - Determination of structural properties - Evaluation methods
AS/NZS 2270:2006 Plywood and blockboard for interior use
AS/NZS 2271:2004 Plywood and blockboard for exterior use
AS/NZS 2272:2006 Plywood - Marine
AS/NZS 2280:2014 Ductile iron pipes and fittings
AS/NZS 2293.2:1995 Emergency evacuation lighting for buildings - Inspection and maintenance
NZS 2295:2006 Pliable, permeable building underlays
AS/NZS 2310:2002 Glossary of paint and painting terms
AS/NZS 2311:2017 Guide to the painting of buildings
AS/NZS 2312.1:2014
Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 1: Paint
coatings
AS/NZS 2312.2:2014
Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 2: Hot
dip galvanizing
AS/NZS 2343:1997 Bullet-resistant panels and elements
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2350.0:1999 Methods of testing portland and blended cements - General introduction and list of methods
AS/NZS 2350.1:2006 Methods of testing portland and blended cements - Method 1: Sampling
AS/NZS 2350.11:2006 Methods of testing portland and blended cements - Method 11: Compressive strength
AS/NZS 2350.16:2006 Methods of testing portland and blended cements - Method 16: Determination of air content of masonry cement
AS/NZS 2350.17:2006 Methods of testing portland and blended cements - Method 17: Determination of soundness of masonry cement
AS/NZS 2350.18:2006 Methods of testing portland and blended cements - Method 18: Determination of water retention of masonry cement
AS/NZS 2350.3:2006 Methods of testing portland and blended cements - Method 3: Normal consistency
AS/NZS 2350.4:2006 Methods of testing portland and blended cements - Method 4: Setting time
AS/NZS 2350.5:2006 Methods of testing portland and blended cements - Method 5: Determination of soundness
AS/NZS 2350.8:2006 Methods of testing portland and blended cements - Method 8: Fineness index by air permeability method
AS/NZS 2425:2015 Bar chairs in reinforced concrete - Product requirements and test methods
AS/NZS 2455.1:2007 Textile floor coverings - Installation practice - General
AS/NZS 2455.2:2007 Textile floor coverings - Installation practice - Carpet tiles
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 2535.1:2007 Test methods for solar collectors - Thermal performance of glazed liquid heating collectors including pressure drop
AS/NZS 2537.1:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping
systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General
AS/NZS 2537.2:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping
systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings
AS/NZS 2537.3:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 3: Plastics piping
systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system
AS/NZS 2537.4:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 4: Plastics piping
systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of
conformity
AS/NZS 2537.5:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes
and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series -
Specifications - Fittings for mechanical jointing (including PE-X/metal transitions)
AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 2566.1 Supplement 1:1998 Buried flexible pipelines - Structural design - Commentary (Supplement to AS/NZS 2566.1:1998)
AS/NZS 2566.1:1998 Buried flexible pipelines - Structural design
AS/NZS 2566.2:2002 Buried flexible pipelines - Installation
AS/NZS 2588:1998 Gypsum plasterboard
AS/NZS 2589:2017 Gypsum linings - Application and finishing
AS/NZS 2633:1996 Guide to the specification of colours
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 2638.1:2011 Gate valves for waterworks purposes - Part 1: Metal seated
AS/NZS 2638.2:2011 Gate valves for waterworks purposes - Part 2: Resilient seated
AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
AS/NZS 2642.3:2008
Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water
applications
AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall ties
AS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessories
AS/NZS 2699.3:2002 Built-in components for masonry construction - Lintels and shelf angles (durability requirements)
AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS/NZS 2754.1:2016
Adhesives for timber and timber products - Part 1: Adhesives for manufacture of plywood and laminated veneer lumber
(LVL)
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
AS/NZS 2878:2000 Timber - Classification into strength groups
AS/NZS 2890.1:2004 Parking facilities - Off-street car parking
AS/NZS 2890.6:2009 Parking facilities - Off-street parking for people with disabilities
AS/NZS 2904:1995 Damp-proof courses and flashings
AS/NZS 2908.1:2000 Cellulose-cement products - Corrugated sheets
AS/NZS 2908.2:2000 Cellulose-cement products - Flat sheets
AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation
AS/NZS 2924.1:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Classification and specifications
AS/NZS 2924.2:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Determination of properties
AS/NZS 2982:2010 Laboratory design and construction
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3003:2011 Electrical installations - Patient areas
AS/NZS 3008.1.1:2017
Electrical installations - Selection of cables - Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV -
Typical Australian installation conditions
AS/NZS 3008.1.2:2017
Electrical installations - Selection of cables - Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV -
Typical New Zealand conditions
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements
AS/NZS 3080:2013 Information technology - Generic cabling for customer premises
AS/NZS 3084:2017 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
AS/NZS 3085.1:2004 Telecommunications installations - Basic requirements
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment
AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 3101.1&2:2006 Concrete structures standard
NZS 3103:1991 Specification for sands for mortars and plasters
NZS 3104:2003 Specification for concrete production
NZS 3106:1986 Code of practice for concrete structures for the storage of liquids
NZS 3106:2009 Design of concrete structures for the storage of liquids
NZS 3109:1997 Concrete construction
NZS 3111:1986 Methods of test for water and aggregate for concrete
NZS 3112.1:1986 Methods of test for concrete - Tests relating to fresh concrete
NZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concrete
NZS 3112.3:1986 Methods of test for concrete - Tests on hardened concrete other than for strength
NZS 3112.4:1986 Methods of test for concrete - Tests relating to grout
AS/NZS 3112:2011 Approval and test specification - Plugs and socket-outlets
AS/NZS 3112:2017 Approval and test specification - Plugs and socket-outlets
AS/NZS 3113:2005 Approval and test specification - Ceiling roses
NZS 3114:1987 Specification for concrete surface finishes
NZS 3116:2002 Concrete segmental and flagstone paving
NZS 3121:2015 Water and aggregate for concrete
NZS 3122:2009 Specification for Portland and blended cements (General and special purpose)
NZS 3123:2009 Specification for pozzolan for use with Portland and blended cement
NZS 3124:1987 Specification for concrete construction for minor works
NZS 3125:1991 Specification for portland-limestone filler cement
AS/NZS 3136:2001 Approval and test specification - Electrical equipment for spa and swimming pools
AS/NZS 3140:2014 Approval and test specification - Edison screw lampholders
AS/NZS 3190:2016 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 3191:2008 Electric flexible cords
SAA/SNZ HB 32:1995 Control of microbial growth in air-handling and water systems of buildings
AS/NZS 3200.2.11:1999
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Gamma beam
therapy equipment
AS/NZS 3200.2.13:2005 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Anaesthetic systems
AS/NZS 3200.2.15:1994
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Capacitor discharge
X-ray generators
AS/NZS 3200.2.200:2005
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Oxygen
concentrators for individual patient use
AS/NZS 3200.2.201:2000
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Dento-maxillofacial
X-ray equipment
AS/NZS 3200.2.202:1996
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infant apnoea
monitors for domestic use
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3200.2.22:1997
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Diagnostic and
therapeutic laser equipment
AS/NZS 3200.2.23:2001
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Transcutaneous
partial pressure monitoring equipment
AS/NZS 3200.2.24:1999
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infusion pumps and
controllers
AS/NZS 3200.2.26:2005
Approval and test specification - Medical electrical equipment - Particular requirements for safety -
Electroencephalographs
AS/NZS 3200.2.30:2001
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Automatic cycling
non-invasive blood pressure monitoring equipment
AS/NZS 3200.2.32:1994
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Associated
equipment of X-ray equipment
AS/NZS 3200.2.33:2005
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Magnetic resonance
equipment for medical diagnosis
AS/NZS 3200.2.34:1996
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Direct blood-
pressure monitoring equipment
AS/NZS 3200.2.35:1999
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Blankets, pads and
mattresses intended for heating in medical use
AS/NZS 3200.2.36:1998
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Extracorporeally
induced lithotripsy
AS/NZS 3200.2.39:2001
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Peritoneal dialysis
equipment
AS/NZS 3200.2.4:2006 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Cardiac defibrillators
AS/NZS 3200.2.40:1999
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Electromyographs
and evoked response equipment
AS/NZS 3200.2.41:2002
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Surgical luminaires
and luminaires for diagnosis
AS/NZS 3200.2.44:2005
Approval and test specification - Medical electrical equipment - Particular requirements for safety - X-ray equipment for
computed tomography
AS/NZS 3200.2.46:2003 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Operating tables
AS/NZS 3200.2.5:2002
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Ultrasonic
physiotherapy equipment
AS/NZS 3200.2.6:2005
Approval and test specification - Medical electrical equipment - Particular requirements for safety - Microwave therapy
equipment
AS/NZS 3200.2.7:1999
Approval and test specification - Medical electrical equipment - Particular requirements for safety - High voltage
generators of diagnostic X-ray generators
NZS 3404.1:2009 Looseleaf Steel structures Standard - Materials, fabrication, and construction
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 3404 Parts 1 and 2:1997 Steel Structures Standard
AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies - Type-tested and partially type-tested assemblies
AS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assemblies - Particular requirements for busbar trunking systems (busways)
AS/NZS 3439.3:2002
Low-voltage switchgear and controlgear assemblies - Particular requirements for low-voltage switchgear and
controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution
boards
AS/NZS 3439.5:2009
Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for power distribution in
public networks
AS/NZS 3497:1998 Drinking water treatment units - Plumbing requirements
AS/NZS 3499:2006 Water supply - Flexible hose assemblies
AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
AS/NZS 3500.3:2015 Plumbing and drainage - Part 3: Stormwater drainage
AS/NZS 3500.4:2015 Plumbing and drainage - Part 4: Heated water services
AS/NZS 3500.5:2012 Plumbing and drainage - Part 5: Housing installations
NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation
NZS 3504:1979 Specification for aluminium windows
AS/NZS 3504:2006 Fire blankets
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS/NZS 3582.1:2016 Supplementary cementitious materials - Part 1: Fly ash
AS/NZS 3582.3:2016 Supplementary cementitious materials - Part 3: Amorphous silica
AS/NZS 3598.1:2014 Energy audits - Part 1: Commercial buildings
AS/NZS 3598.2:2014 Energy audits - Part 2: Industrial and related activities
AS/NZS 3598.3:2014 Energy audits - Part 3: Transport related activities
NZS 3601:1973 Metric dimensions for timber
NZS/BS 3601:1987 Specification for carbon steel pipes and tubes with specified room temperature properties for pressure purposes
NZS 3602:2003 Timber and wood-based products for use in building
NZS 3603:1993 Timber Structures Standard
NZS 3604:2011 Timber-framed buildings
SNZ HB 3604:2011 Timber-framed buildings - Selected extracts from NZS 3604:2011
NZS 3605:2001 Timber piles and poles for use in building
NZS 3610:1979 Specification for profiles of mouldings and joinery
NZS 3617:1979 Specification for profiles of weatherboards, fascia boards, and flooring
NZS 3619:1979 Specification for timber windows
NZS 3622:2004 Verification of timber properties
NZS 3631:1988 New Zealand timber grading rules
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 3640:2003 Chemical preservation of round and sawn timber
AS/NZS 3661.2:1994 Slip resistance of pedestrian surfaces - Part 2: Guide to the reduction of slip hazards
AS/NZS 3662:2005 Performance of showers for bathing
AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial control - Part 1: Design, installation and commissioning
AS/NZS 3666.2:2011 Air-handling and water systems of buildings - Microbial control - Part 2: Operation and maintenance
AS/NZS 3666.3:2011
Air-handling and water systems of buildings - Microbial control - Part 3: Performance-based maintenance of cooling
water systems
AS/NZS 3666.4:2011
Air-handling and water systems of buildings - Microbial control - Part 4: Performance-based maintenance of air-handling
systems (ducts and components)
AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections
AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I sections
AS/NZS 3690:2009 Installation of ABS pipe systems
AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings
AS/NZS 3718:2005 Water supply - Tap ware
AS/NZS 3725:2007 Design for installation of buried concrete pipes
AS/NZS 3725 Supplement 1:2007 Design for installation of buried concrete pipes – Commentary
AS/NZS 3744.1:1998 Furniture - Assessment of the ignitability of upholstered furniture - Ignition source - Smouldering cigarette
AS/NZS 3744.2:1998 Furniture - Assessment of the ignitability of upholstered furniture - Ignition source - Match-flame equivalent
AS/NZS 3744.3:1998
Furniture - Assessment of the ignitability of upholstered furniture - Ignition sources - Nominal 160 mL/min gas flame and
nominal 350 mL/min gas flame
AS/NZS 3750.0:2008 Paints for steel structures - Introduction and list of Standards
AS/NZS 3750.1:2008 Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
AS/NZS 3750.10:1994 Paints for steel structures - Full gloss epoxy (two-pack)
AS/NZS 3750.11:2009 Paints for steel structures - Chlorinated rubber - High-build and gloss
AS/NZS 3750.12:1996 Paints for steel structures - Alkyd/micaceous iron oxide
AS/NZS 3750.13:1997 Paints for steel structures - Epoxy primer (two pack)
AS/NZS 3750.14:1997 Paints for steel structures - High-build epoxy (two-pack)
AS/NZS 3750.15:1998 Paints for steel structures - Inorganic zinc silicate paint
AS/NZS 3750.16:1998
Paints for steel structures - Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed
steel
AS/NZS 3750.17:1998 Paints for steel structures - Etch primers (single pack and two-pack)
AS/NZS 3750.19:2008 Paints for steel structures - Metal primer - General purpose
AS/NZS 3750.2:2008 Paints for steel structures - Ultra high-build paint
AS/NZS 3750.20:2008 Paints for steel structures - Anticorrosive metal primer - Solvent-borne - Lead and chromate free
AS/NZS 3750.21:2008 Paints for steel structures - Undercoat - Solvent-borne
AS/NZS 3750.22:2008 Paints for steel structures - Full gloss enamel - Solvent-borne
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 3750.23:2008 Paints for steel structures - Semi-gloss enamel - Solvent-borne
AS/NZS 3750.3:2008 Paints for steel structures - Heat resisting - Exterior
AS/NZS 3750.4:1994 Paints for steel structures - Bitumen paint
AS/NZS 3750.5:2008 Paints for steel structures - Acrylic full gloss (two-pack)
AS/NZS 3750.6:2009 Paints for steel structures - Full gloss polyurethane (two-pack)
AS/NZS 3750.7:2009 Paints for steel structures - Aluminium paint
AS/NZS 3750.8:1994 Paints for steel structures - Vinyl paints - Primer, high-build and gloss
AS/NZS 3750.9:2009 Paints for steel structures - Organic zinc-rich primer
AS/NZS 3809:1998 Safes and strongrooms
AS/NZS 3810.0:1998 Safes and strongrooms - Methods of test - Introduction and list of methods
AS/NZS 3810.1:1998 Safes and strongrooms - Methods of test - Test for physical attack
AS/NZS 3810.2:1998 Safes and strongrooms - Methods of test - Test for anchoring strength
AS/NZS 3810.3:1998 Safes and strongrooms - Methods of test - Test for explosive resistance
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter
AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and construction
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 3896:2008 Waters - Examination for Legionella spp. including Legionella pneumophila
NZS 3902:2004 Housing, alterations and small buildings contract
NZS 3910:2013 Conditions of contract for building and civil engineering construction
NZS 3910:2013 PACK OF 3 NZS 3910:2013 PACK OF 3 Conditions of contract for building and civil engineering construction
NZS 3915:2005
Conditions of contract for building and civil engineering construction (where no person is appointed to act as engineer
to the contract)
NZS 3916:2013 Conditions of contract for building and civil engineering - Design and construct
NZS 3916:2013 PACK OF 3 NZS 3916:2013 PACK OF 3 Conditions of contract for building and civil engineering - Design and construct
NZS 3917:2013 Conditions of contract for building and civil engineering - Fixed term
NZS 3917:2013 PACK OF 3 NZ 3917:2013 PACK OF 3 Conditions of contract for building and civil engineering - Fixed term
AS/NZS 3982:1996 Urinals
AS/NZS 4012:2014 Domestic solid fuel burning appliances - Method for determination of power output and efficiency
AS/NZS 4013:2014 Domestic solid fuel burning appliances - Method for determination of flue gas emission
AS/NZS 4014.1:1999 Domestic solid fuel burning appliances - Test fuels - Hardwood
AS/NZS 4014.2:2016 Domestic solid fuel burning appliances - Test fuels - Part 2: Softwood
AS/NZS 4014.3:1999 Domestic solid fuel burning appliances - Test fuels - Lignite briquettes
AS/NZS 4014.4:1999 Domestic solid fuel burning appliances - Test fuels - Sub-bituminous coal
AS/NZS 4014.6:2007 Domestic solid fuel burning appliances - Test fuels - Wood pellets
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 4040.4:1996 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for sheet roof materials
AS/NZS 4040.5:1996 Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for wall boards
AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4063.1:2010 Characterization of structural timber - Test methods
AS/NZS 4063.2:2010 Characterization of structural timber - Determination of characteristic values
AS/NZS 4065:2010 Concrete utility services poles
AS/NZS 4087:2011 Metallic flanges for waterworks purposes
AS/NZS 4088.1:1996
Specification for burning behaviour of upholstered furniture - Upholstery materials for domestic furniture - Smouldering
ignitability
SNZ HB 4102:2011 Safety in the home
NZS 4104:1994 Seismic restraint of building contents
NZS 4121:2001 Design for access and mobility: Buildings and associated facilities
AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications
AS/NZS 4131:2010 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS/NZS 4200.1:2017 Pliable building membranes and underlays - Part 1: Materials
AS/NZS 4200.2:1994 Pliable building membranes and underlays - Installation requirements
AS/NZS 4201.0:1994 Pliable building membranes and underlays - Methods of test - General introduction and list of methods
AS/NZS 4201.1:1994 Pliable building membranes and underlays - Methods of test - Resistance to dry delamination
AS/NZS 4201.2:1994 Pliable building membranes and underlays - Methods of test - Resistance to wet delamination
AS/NZS 4201.3:1994 Pliable building membranes and underlays - Methods of test - Shrinkage
AS/NZS 4201.4:1994 Pliable building membranes and underlays - Methods of test - Resistance to water penetration
AS/NZS 4201.5:1994 Pliable building membranes and underlays - Methods of test - Emittance
AS/NZS 4201.6:1994 Pliable building membranes and underlays - Methods of test - Surface water absorbency
NZS 4202:1995 Standard method of measurement of building works
NZS 4206:1992 Concrete interlocking roofing tiles
NZS 4210:2001 Masonry construction: Materials and workmanship
NZS 4211:2008 Specification for performance of windows
NZMP 4212:1998 Glossary of building terminology
NZS 4214:2006 Methods of determining the total thermal resistance of parts of buildings
NZS 4217:1980 Pressed metal tile roofs
NZS 4218:2004 Energy efficiency - Small building envelope
NZS 4218:2009 Thermal insulation - Housing and small buildings
NZS 4219:2009 Seismic performance of engineering systems in buildings
NZS 4220:1982 Code of practice for energy conservation in non-residential buildings
NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing
NZS 4223 Parts 1 and 2:1985 Code of practice for glazing in buildings - Code of practice for glazing in buildings
NZS 4223.2:2016 Glazing in buildings - Part 2: Insulating glass units
NZS 4223.3:2016 Glazing in buildings - Part 3: Human impact safety requirements
NZS 4223.4:2008 Glazing in buildings - Part 4: Wind, dead, snow, and live actions
NZS 4223 Supplement 1:2008 Code of practice for glazing in buildings - Supplement 1 to NZS 4223.1:2008 and NZS 4223.4:2008
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 4229:2013 Concrete masonry buildings not requiring specific engineering design
NZS 4230:2004 Design of reinforced concrete masonry structures
NZS 4232.2:1988 Performance criteria for fire resisting enclosures - Part 2: Fire resisting glazing systems
AS/NZS 4233.1:2013 High pressure water jetting systems - Part 1: Safe operation and maintenance
AS/NZS 4233.2:2013 High pressure water jetting systems - Part 2: Construction and performance
AS/NZS 4234:2008 Heated water systems - Calculation of energy consumption
SNZ HB 4236:2002 Masonry veneer wall cladding
NZS 4239:1993 Automatic sliding door assemblies
NZS 4241:1999 Public toilets
NZS 4243.1:2007 Energy efficiency - Large buildings - Building thermal envelope
NZS 4243.2:2007 Energy efficiency - Large buildings - Part 2: Lighting
SNZ PAS 4244:2003 Insulation of lightweight-framed and solid-timber houses
NZS 4246:2016 Energy efficiency - Installing bulk thermal insulation in residential buildings
NZS 4251.1:2007 Solid plastering - Cement plasters for walls, ceilings and soffits
NZS 4251:1974 Code of practice for solid plastering
AS/NZS 4253:1994 Mailboxes
AS/NZS 4256.1:1994 Plastic roof and wall cladding materials - General requirements
AS/NZS 4256.2:1994 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) building sheets
AS/NZS 4256.3:1994 Plastic roof and wall cladding materials - Glass fibre reinforced polyester (GRP)
AS/NZS 4256.4:1995 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards
AS/NZS 4256.5:1996 Plastic roof and wall cladding materials - Polycarbonate
AS/NZS 4257.0:1994 Plastic roof and wall cladding materials - Methods of test - General introduction and list of methods
AS/NZS 4257.1:1994 Plastic roof and wall cladding materials - Methods of test - Determination of dimensional properties
AS/NZS 4257.10:1997 Plastic roof and wall cladding materials - Methods of test - Determination of surface distortion (oil canning)
AS/NZS 4257.2:1994 Plastic roof and wall cladding materials - Methods of test - Determination of dimensional stability at 60 degrees C
AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
AS/NZS 4257.4:1994 Plastic roof and wall cladding materials - Methods of test - Determination of diffuse light transmission
AS/NZS 4257.5:1994 Plastic roof and wall cladding materials - Methods of test - Determination of glass fibre content
AS/NZS 4257.6:1994 Plastic roof and wall cladding materials - Methods of test - Determination of impact resistance
AS/NZS 4257.7:1994
Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and
impact resistance following ultraviolet light exposure
AS/NZS 4257.8:1994 Plastic roof and wall cladding materials - Methods of test - Determination of residual styrene
AS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test - Determination of transverse bending stiffness
AS/NZS 4266.0:2004 Reconstituted wood-based panels - Methods of test - General introduction and list of methods
AS/NZS 4266.1:2004 Reconstituted wood-based panels - Methods of test - Sampling, cutting, and conditioning of test pieces
AS/NZS 4266.10:2004
Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 oC or boiling
temperature
AS/NZS 4266.11:2004 Reconstituted wood-based panels - Methods of test - Moisture resistance under cyclic test conditions
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4266.12:2003 Reconstituted wood-based panels - Methods of test - Surface water absorption
AS/NZS 4266.13:2004 Reconstituted wood-based panels - Methods of test - Resistance to axial withdrawal of screws
AS/NZS 4266.14:2004 Reconstituted wood-based panels - Methods of test - Dimensional changes associated with changes in relative humidity
AS/NZS 4266.16:2004 Reconstituted wood-based panels - Methods of test - Formaldehyde emission - Desiccator method
AS/NZS 4266.19:2004 Reconstituted wood-based panels - Methods of test - Assessing appearance of melamine overlaid panels
AS/NZS 4266.2:2004
Reconstituted wood-based panels - Methods of test - Method 2: Dimensions, squareness, flatness and edge straightness
of whole panel
AS/NZS 4266.20:2004 Reconstituted wood-based panels - Methods of test - Resistance to surface abrasion (Taber abrasion test)
AS/NZS 4266.21:2004 Reconstituted wood-based panels - Methods of test - Over-cure or under-cure of resin
AS/NZS 4266.22:2004 Reconstituted wood-based panels - Methods of test - Porosity of laminated surface
AS/NZS 4266.23:2004 Reconstituted wood-based panels - Methods of test - Resistance to steam
AS/NZS 4266.24:2004 Reconstituted wood-based panels - Methods of test - Resistance to cracking
AS/NZS 4266.25:2004 Reconstituted wood-based panels - Methods of test - Resistance to staining
AS/NZS 4266.26:2004 Reconstituted wood-based panels - Methods of test - Resistance to dry heat
AS/NZS 4266.27:2004 Reconstituted wood-based panels - Methods of test - Resistance to impact
AS/NZS 4266.28:2004 Reconstituted wood-based panels - Methods of test - Bond strength PVC films
AS/NZS 4266.29:2004 Reconstituted wood-based panels - Methods of test - Heat resistance of PVC films
AS/NZS 4266.3:2004 Reconstituted wood-based panels - Methods of test - Moisture content
AS/NZS 4266.30:2004 Reconstituted wood-based panels - Methods of test - Moisture resistance of finished foils
AS/NZS 4266.31:2004 Reconstituted wood-based panels - Methods of test - Adhesion of paper foils by the crosscut test
AS/NZS 4266.32:2004 Reconstituted wood-based panels - Methods of test - Veneer bond strength
AS/NZS 4266.33:2004 Reconstituted wood-based panels - Methods of test - Veneer bond durability
AS/NZS 4266.34:2004 Reconstituted wood-based panels - Methods of test - Surface absorption
AS/NZS 4266.35:2004 Reconstituted wood-based panels - Methods of test - Dimensions of test pieces
AS/NZS 4266.4:2004 Reconstituted wood-based panels - Methods of test - Density
AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.6:2004
Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (internal
bond strength)
AS/NZS 4266.7:2004 Reconstituted wood-based panels - Methods of test - Surface soundness
AS/NZS 4266.8:2004 Reconstituted wood-based panels - Methods of test - Swelling in thickness after immersion in water
AS/NZS 4266.9:2003 Reconstituted wood-based panels - Methods of test - Thickness stability and glue bond quality
AS/NZS 4276.3.1:2007
Water microbiology - Method 3: Heterotrophic colony count methods - Method 3.1: Pour plate method using yeast
extract agar
AS/NZS 4284:2008 Testing of building facades
NZS 4297:1998 Engineering design of earth buildings
NZS 4298:1998 Materials and workmanship for earth buildings
NZS 4299:1998 Earth buildings not requiring specific design
NZS 4302:1987 Code of practice for the control of hygiene in air and water systems in buildings
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 4303:1990 Ventilation for acceptable indoor air quality
NZS 4304:2002 Management of Healthcare Waste
NZS 4305:1996 Energy efficiency - Domestic type hot water systems
NZS 4306:2005 Residential property inspection
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications
AS/NZS 4331.1:1995 Metallic flanges - Steel flanges
AS/NZS 4331.2:1995 Metallic flanges - Cast iron flanges
AS/NZS 4331.3:1995 Metallic flanges - Copper alloy and composite flanges
NZS 4332:1997 Non-domestic passenger and goods lifts
NZS 4334:2012 Platform lifts and low-speed lifts
AS/NZS 4347.0:1995
Damp-proof courses and flashings - Methods of test - General introduction, list of methods and test specimen
requirements
AS/NZS 4347.1:1995 Damp-proof courses and flashings - Methods of test - Determination of water permeability
AS/NZS 4347.10:1995
Damp-proof courses and flashings - Methods of test - Determination of mass of desaturated base and percentage
saturation
AS/NZS 4347.2:1995 Damp-proof courses and flashings - Methods of test - Determination of continuity of coating on metal centres
AS/NZS 4347.3:1995 Damp-proof courses and flashings - Methods of test - Determination of pliability of bitumen coating on metal centres
AS/NZS 4347.4:1995 Damp-proof courses and flashings - Methods of test - Determination of pliability - Materials with fabric or felt base
AS/NZS 4347.5:1995 Damp-proof courses and flashings - Methods of test - Determination of compression properties
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS/NZS 4347.7:1995
Damp-proof courses and flashings - Methods of test - Determination of thickness of bitumen coating and thickness or
mass of metallic centre
AS/NZS 4347.8:1995 Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for testing
AS/NZS 4347.9:1995 Damp-proof courses and flashings - Methods of test - Determining thickness
AS/NZS 4348:1995 Water supply - Domestic type water treatment appliances - Performance requirements
AS/NZS 4353:1995 Portable fire extinguishers - Aerosol type
AS/NZS 4357.0:2005 Structural laminated veneer lumber - Specifications
AS/NZS 4357.1:2005 Structural laminated veneer lumber - Method of test for measurement of dimensions and shape
AS/NZS 4357.2:2006 Structural laminated veneer lumber - Determination of structural properties - Test methods
AS/NZS 4357.3:2006 Structural laminated veneer lumber - Determination of structural properties - Evaluation methods
AS/NZS 4357.4:2005 Structural laminated veneer lumber - Determination of formaldehyde emissions
AS/NZS 4361.1:2017 Guide to hazardous paint management - Part 1: Lead and other hazardous metallic pigments in industrial applications
AS/NZS 4364:2010 Timber - Bond performance of structural adhesives
AS/NZS 4386.1:1996 Domestic kitchen assemblies - Kitchen units
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4386.2:1996 Domestic kitchen assemblies - Installation
AS/NZS 4387.0:1996 Domestic kitchen assemblies - Methods of test - Introduction, list of methods and general requirements
AS/NZS 4387.1:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of carcass and underframe
AS/NZS 4387.10:1996 Domestic kitchen assemblies - Methods of test - Determination of slam open of drawers
AS/NZS 4387.11:1996 Domestic kitchen assemblies - Methods of test - Determination of slam shut of drawers
AS/NZS 4387.12:1996 Domestic kitchen assemblies - Methods of test - Determination of retention of the bottom surface of drawers
AS/NZS 4387.13:1996
Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of drawers, sliding shelves and
runners
AS/NZS 4387.14:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of handles
AS/NZS 4387.15:1996
Domestic kitchen assemblies - Methods of test - Determination of the strength of support frames for wall attachment
devices
AS/NZS 4387.16:1996 Domestic kitchen assemblies - Methods of test - Determination of calibration of drawer slamming apparatus
AS/NZS 4387.2:1996 Domestic kitchen assemblies - Methods of test - Determination of shelf deflection
AS/NZS 4387.3:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of shelf supports
AS/NZS 4387.4:1996 Domestic kitchen assemblies - Methods of test - Determination of the strength of worktops and bottom surfaces
AS/NZS 4387.5:1996 Domestic kitchen assemblies - Methods of test - Determination of strength of hinged doors
AS/NZS 4387.6:1996 Domestic kitchen assemblies - Methods of test - Determination of slam open of hinged doors
AS/NZS 4387.7:1996 Domestic kitchen assemblies - Methods of test - Determination of slam shut of hinged doors
AS/NZS 4387.8:1996 Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of hinged doors
AS/NZS 4387.9:1996
Domestic kitchen assemblies - Methods of test - Determination of resistance to downward static load on drawers and
other runner-supported items
AS/NZS 4389:2015 Roof safety mesh
AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
NZS 4402.1 to 7:1986 Set Methods of testing soils for civil engineering purposes - Soil Tests
NZS 4402.2.2:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.2 Determination of the liquid limit
NZS 4402.2.4:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.4 Determination of the plasticity
index
NZS 4402.2.6:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.6 Determination of the linear
shrinkage
NZS 4402.2.8.1:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.1 Standard method by wet
sieving
NZS 4402.2.8.2:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.2 Subsidiary method by dry
sieving
NZS 4402.2.8.3:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.3 Standard method for fine soils
(pipette method)
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 4402.2.8.4:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.4 Subsidiary method for fine
soils (hydrometer method)
NZS 4402.4.1.1:1986
Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the dry density/water
content relationship - Test 4.1.1 New Zealand standard compaction test
NZS 4402.4.2.1:1988
Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and
maximum dry densities and relative density of a cohesionless soil - Test 4.2.1 Minimum dry density
NZS 4402.4.2.2:1988
Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and
maximum dry densities and relative density of a cohesionless soil - Test 4.2.2 Maximum dry density
NZS 4402.4.2.3:1988
Methods of testing soils for civil engineering purposes - Soil compaction tests - Determination of the minimum and
maximum dry densities and relative density of a cohesionless soil - Test 4.2.3 Relative density
NZS 4402.5.1.1:1986
Methods of testing soils for civil engineering purposes - Soil density tests - Determination of the density of soil - Test
5.1.1 Sand replacement method for the determination of in situ density
NZS 4404:2010 Land development and subdivision infrastructure
NZS 4407:2015 Methods of sampling and testing road aggregates
AS/NZS 4420.1:2016
Windows, external glazed, timber and composite doors - Methods of test - Part 1: Test sequence, sampling and
test methods
NZS 4431:1989 Code of practice for earth fill for residential development
NZS 4441:2008 Swimming pool design Standard
AS/NZS 4441:2017 Oriented PVC (PVC-O) pipes for pressure applications
NZS 4442:1988 Welded steel pipes and fittings for water, sewage and medium pressure gas
AS/NZS 4442:1997 Office desks
AS/NZS 4443:1997 Office panel systems - Workstations
AS/NZS 4445.1:1997 Solar heating - Domestic water heating systems - Performance rating procedure using indoor test methods
NZS 4454:2005 Composts, soil conditioners and mulches
AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall units - Masonry units
AS/NZS 4455.2:2010 Masonry units, pavers, flags and segmental retaining wall units - Pavers and flags
AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall units - Segmental retaining wall units
AS/NZS 4456:2003 Masonry units, segmental pavers and flags - Methods of test
AS/NZS 4487:1997 Pyrogen fire extinguishing systems
AS/NZS 4490:2011 Timber - Solid - Stress-graded for structural purposes - Verification of properties
AS/NZS 4491:1997 Timber - Glossary of terms in timber related Standards
AS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewer - General performance requirements
NZS 4503:2005 Hand operated fire-fighting equipment
SNZ PAS 4505:2007 Firefighting waterway equipment
AS/NZS 4505:2012 Garage doors and other large access doors
AS/NZS 4507:2006 Cables - Classification of characteristics when exposed to fire
AS/NZS 4509.1:2009 Stand-alone power systems - Safety and installation
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4509.2:2010 Stand-alone power systems - System design
SNZ PAS 4509:2008 New Zealand Fire Service firefighting water supplies code of practice
NZS 4510:2008 Fire hydrant systems for buildings
NZS 4512:2010 Fire detection and alarm systems in buildings
NZS 4514:2009 Interconnected smoke alarms for houses
NZS 4515:2003 Fire sprinkler systems for residential occupancies
NZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres)
NZS 4517:2002 Fire sprinkler systems for houses
NZS 4517:2010 Fire sprinkler systems for houses
NZS 4520:2010 Fire-resistant doorsets
NZS 4522:2010 Underground fire hydrants
SNZ HB 4525:2006 Fire Risk Management Handbook
AS/NZS 4534:2006 Zinc and zinc/aluminium-alloy coatings on steel wire
NZS 4541:2003 Automatic fire sprinkler systems
NZS 4541:2007 Automatic fire sprinkler systems
NZS 4541:2013 Automatic fire sprinkler systems
AS/NZS 4543.2:1999 Protective devices against diagnostic medical X-radiation - Protective glass plates
AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials
AS/NZS 4600 Supplement 1:1998 Cold-formed steel structures - Commentary
AS/NZS 4600:2005 Cold-formed steel structures
NZS 4602:1988 Low pressure copper thermal storage electric water heaters
NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open-vented systems)
NZS 4604:1990 Dairy-type thermal storage electric water heaters
NZS 4606.1:1989 Storage water heaters - General requirements
NZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shells
NZS 4606.3:1992 Storage water heaters - Specific requirements for water heaters with composite shells
NZS 4607:1989 Installation of thermal storage electric water heaters: valve-vented systems
NZS 4608:1992 Control valves for hot water systems
NZS 4613:1986 Domestic solar water heaters
NZS 4614:1986 Installation of domestic solar water heating systems
NZS 4617:1989 Tempering (3-port mixing) valves
AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfaces
AS/NZS 4666:2012 Insulating glass units
AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass
AS/NZS 4668:2000 Glossary of terms used in the glass and glazing industry
AS/NZS 4671:2001 Steel reinforcing materials
AS/NZS 4672.1:2007 Steel prestressing materials - General requirements
AS/NZS 4672.2:2007 Steel prestressing materials - Testing requirements
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4673:2001 Cold-formed stainless steel structures
AS/NZS 4676:2000 Structural design requirements for utility services poles
AS/NZS 4677:2010 Steel utility services poles
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS/NZS 4692.1:2005 Electric water heaters - Energy consumption, performance and general requirements
AS/NZS 4692.2:2005 Electric water heaters - Minimum Energy Performance Standard (MEPS) requirements and energy labelling
AS/NZS 4740:2000 Natural ventilators - Classification and performance
NZS/BS 476.20:1987
Fire tests on building materials and structures - Method for determination of the fire resistance of elements of
construction (general principles)
NZS/BS 476.21:1987
Fire tests on building materials and structures - Methods for determination of the fire resistance of loadbearing
elements of construction
NZS/BS 476.22:1987
Fire tests on building materials and structures - Methods for determination of the fire resistance of non-loadbearing
elements of construction
AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 4766:2006 Polyethylene storage tanks for water and chemicals
NZS 4781:1973 Code of practice for safety in welding and cutting
AS/NZS 4783.2:2002
Performance of electrical lighting equipment - Ballasts for fluorescent lamps - Energy labelling and minimum energy
performance standards requirements
AS/NZS 4787:2001 Timber - Assessment of drying quality
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
AS/NZS 4798(Int):2005 Polyethylene maintenance shafts
AS/NZS 4801:2001 Occupational Health and Safety Management Systems - Specification with guidance for use
AS/NZS 4804:2001
Occupational Health and Safety Management Systems - General guidelines on principles, systems and supporting
techniques
NZS/AS 4830-2007 Determination of the extinction propensity of cigarettes
AS/NZS 4858:2004 Wet area membranes
AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings - General criteria and technical provisions
AS/NZS 4886:2007 Domestic solid fuel burning appliance - Pellet heaters - Determination of flue gas emission
AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation
AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems
AS/NZS 4994.1:2009 Temporary roof edge protection for housing and residential buildings - General requirements
AS/NZS 4994.2:2009
Temporary roof edge protection for housing and residential buildings - Roof edge protection - Installation and
dismantling
AS/NZS 4994.3:2010
Temporary roof edge protection for housing and residential buildings - Installation and dismantling for edges other than
roof edges
AS/NZS 4998:2009 Bolted unrestrained mechanical couplings for waterworks purposes
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 4999:2006 PVC-U maintenance shafts
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV
AS/NZS 5000.2:2006 Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
TR 5058:2009 Temperature rerating of PVC pressure pipes operating at elevated temperatures
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
AS/NZS 5078:2007 Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power output and efficiency
AS/NZS 5125.1:2014 Heat pump water heaters - Performance assessment - Part 1: Air source heat pump water heaters
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
NZS 5255:2014 Safety verification of existing gas installations
NZS 5258:2003 Gas distribution networks
NZS 5262:2003 Gas appliance safety
NZS 5266:2014 Safety of gas appliances
NZS 5270:2005 Cable cars for private residences - Design, construction, installation and maintenance
AS/NZS 5601.1:2013 Gas installations - Part 1: General installations
NZS 5807:1980 Code of practice for industrial identification by colour, wording or other coding
NZS 5826:2010 Pool water quality
SNZ HB 5828.1:2006 General Playground Equipment and Surfacing Handbook
SNZ HB 5828.2:2006 Supervised Early Childhood Facilities - Playground Equipment and Surfacing Handbook
NZS 5828:2015 Playground equipment and surfacing
AS/NZS 60155:2000 Glow-starters for fluorescent lamps
AS/NZS IEC 60331.1:2017
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature
of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV and with an overall diameter exceeding 20
mm
AS/NZS IEC 60331.2:2017
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature
of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV and with an overall diameter not exceeding
20 mm
AS/NZS IEC 60331.3:2017
Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature
of at least 830 °C for cables of rated voltage up to and including 0.6/1.0 kV tested in a metal enclosure
AS/NZS IEC 60332.1.1:2017
Tests on electric and optical fibre cables under fire conditions - Part 1.1: Test for vertical flame propagation for a single
insulated wire or cable - Apparatus
AS/NZS IEC 60332.1.2:2017
Tests on electric and optical fibre cables under fire conditions - Part 1.2: Test for vertical flame propagation for a single
insulated wire or cable - Procedure for 1Â kW pre-mixed flame
AS/NZS IEC 60332.1.3:2017
Tests on electric and optical fibre cables under fire conditions - Part 1.3: Test for vertical flame propagation for a single
insulated wire or cable - Procedure for determination of flaming droplets/particles
AS/NZS IEC 60332.3.10:2017
Tests on electric and optical fibre cables under fire conditions - Part 3.10: Test for vertical flame spread of vertically-
mounted bunched wires or cables - Apparatus
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS IEC 60332.3.21:2017
Tests on electric cables under fire conditions - Part 3.21: Test for vertical flame spread of vertically-mounted bunched
wires or cables - Category A F/R
AS/NZS IEC 60332.3.22:2017
Tests on electric and optical fibre cables under fire conditions - Part 3.22: Test for vertical flame spread of vertically-
mounted bunched wires or cables - Category A
AS/NZS IEC 60332.3.23:2017
Tests on electric and optical fibre cables under fire conditions - Part 3.23: Test for vertical flame spread of vertically-
mounted bunched wires or cables - Category B
AS/NZS IEC 60332.3.24:2017
Tests on electric and optical fibre cables under fire conditions - Part 3.24: Test for vertical flame spread of vertically-
mounted bunched wires or cables - Category C
AS/NZS IEC 60332.3.25:2017
Tests on electric and optical fibre cables under fire conditions - Part 3.25: Test for vertical flame spread of vertically-
mounted bunched wires or cables - Category D
AS/NZS 60335.1:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 1: General requirements
AS/NZS 60335.1:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 1: General requirements
AS/NZS 60335.2.10:2006
Household and similar electrical appliances - Safety - Particular requirements for floor treatment machines and wet
scrubbing machines
AS/NZS 60335.2.100:2003
Household and similar electrical appliances - Safety - Particular requirements for hand-held mains-operated garden
blowers, vacuums and blower vacuums
AS/NZS 60335.2.101:2002 Household and similar electrical appliances - Safety - Particular requirements for vaporizers
AS/NZS 60335.2.102:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.102: Particular requirements for gas, oil and solid-fuel
burning appliances having electrical connections
AS/NZS 60335.2.102:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.102: Particular requirements for gas, oil and solid-fuel
burning appliances having electrical connections
AS/NZS 60335.2.103:2011 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.103: Particular requirements for drives for gates, doors and
windows
AS/NZS 60335.2.103:2016 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.103: Particular requirements for drives for gates, doors and
windows
AS/NZS 60335.2.105:2006
Household and similar electrical appliances - Safety - Part 2.10: Particular requirements for multifunctional shower
cabinets
AS/NZS 60335.2.106:2007 Household and similar electrical appliances - Safety - Underfloor heating
AS/NZS 60335.2.109:2011 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.109: Particular requirements for UV radiation water
treatment
AS/NZS 60335.2.11:2009 Household and similar electrical appliances - Safety - Particular requirements for tumble dryers
AS/NZS 60335.2.11:2017 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.11: Particular requirements for tumble dryers
AS/NZS 60335.2.11:2017 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.11: Particular requirements for tumble dryers
AS/NZS 60335.2.12:2004 Household and similar electrical appliances - Safety - Particular requirements for warming plates and similar appliances
AS/NZS 60335.2.13:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Particular requirements for deep fat fryers, frying pans and similar
appliances
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.16:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.16: Particular requirements for food waste disposers
AS/NZS 60335.2.17:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.17: Particular requirements for blankets, pads, clothing and
similar flexible heating appliances
AS/NZS 60335.2.2:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.2: Particular requirements for vacuum cleaners and water-
suction cleaning appliances
AS/NZS 60335.2.21:2002 Household and similar electrical appliances - Safety - Particular requirements for storage water heaters
AS/NZS 60335.2.23:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.23: Particular requirements for appliances for skin or hair
care
AS/NZS 60335.2.24:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Particular requirements for refrigerating appliances, ice-cream
appliances and ice-makers
AS/NZS 60335.2.25:2011 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.25: Particular requirements for microwave ovens including
combination microwave ovens
AS/NZS 60335.2.25:2011 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.25: Particular requirements for microwave ovens including
combination microwave ovens
AS/NZS 60335.2.26:2006 Household and similar electrical appliances - Safety - Particular requirements for clocks
AS/NZS 60335.2.27:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.27: Particular requirements for appliances for skin exposure
to ultraviolet and infrared radiation
AS/NZS 60335.2.27:2016 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.27: Particular requirements for appliances for skin exposure
to optical radiation
AS/NZS 60335.2.28:2006 Household and similar electrical appliances - Safety - Particular requirements for sewing machines
AS/NZS 60335.2.29:2004 Household and similar electrical appliances - Safety - Particular requirements for battery chargers
AS/NZS 60335.2.3:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.3: Particular requirements for electric irons
AS/NZS 60335.2.30:2009 Household and similar electrical appliances - Safety - Particular requirements for room heaters
AS/NZS 60335.2.30:2015 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.30: Particular requirements for room heaters
AS/NZS 60335.2.30:2015 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.30: Particular requirements for room heaters
AS/NZS 60335.2.31:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.31: Particular requirements for range hoods and other
cooking fume extractors
AS/NZS 60335.2.31:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.31: Particular requirements for range hoods and other
cooking fume extractors
AS/NZS 60335.2.32:2004 Household and similar electrical appliances - Safety - Particular requirements for massage appliances
AS/NZS 60335.2.32:2014 Household and similar electrical appliances - Safety - Part 2.32: Particular requirements for massage appliances
AS/NZS 60335.2.32:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.32: Particular requirements for massage appliances
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.34:2013 (Excludes IEC text) Household and similar electrical appliances – Safety – Part 2.34: Particular requirements for motor-compressors
AS/NZS 60335.2.34:2013 (Includes IEC text) Household and similar electrical appliances – Safety – Part 2.34: Particular requirements for motor-compressors
AS/NZS 60335.2.34:2016 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.34: Particular requirements for motor-compressors
AS/NZS 60335.2.34:2016 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.34: Particular requirements for motor-compressors
AS/NZS 60335.2.35:2004 Household and similar electrical appliances - Safety - Particular requirements for instantaneous water heaters
AS/NZS 60335.2.35:2013 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.35: Particular requirements for instantaneous water heaters
AS/NZS 60335.2.35:2013 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.35: Particular requirements for instantaneous water heaters
AS/NZS 60335.2.4:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements for spin extractors
AS/NZS 60335.2.40:2006
Household and similar electrical appliances - Safety - Particular requirements for electrical heat pumps, air-conditioners
and dehumidifiers
AS/NZS 60335.2.40:2015 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.40: Particular requirements for electrical heat pumps, air-
conditioners and dehumidifiers
AS/NZS 60335.2.40:2015 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.40: Particular requirements for electrical heat pumps, air-
conditioners and dehumidifiers
AS/NZS 60335.2.41:2004 Household and similar electrical appliances - Safety - Particular requirements for pumps
AS/NZS 60335.2.43:2005 Household and similar electrical appliances - Safety - Particular requirements for clothes dryers and towel rails
AS/NZS 60335.2.44:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.44: Particular requirements for ironers
AS/NZS 60335.2.45:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.45: Particular requirements for portable heating tools and
similar appliances
AS/NZS 60335.2.5:2002 Household and similar electrical appliances - Safety - Particular requirements for dishwashers
AS/NZS 60335.2.5:2014 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.5: Particular requirements for dishwashers
AS/NZS 60335.2.5:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.5: Particular requirements for dishwashers
AS/NZS 60335.2.51:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationary circulation pumps
for heating and service water installations
AS/NZS 60335.2.52:2006 Household and similar electrical appliances - Safety - Particular requirements for oral hygiene appliances
AS/NZS 60335.2.53:2011 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.53: Particular requirements for sauna heating appliances and
infrared cabins
AS/NZS 60335.2.54:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Particular requirements for surface cleaning appliances for
household use employing liquids or steam
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.55:2011
Household and similar electrical appliances - Safety - Part 2.55: Particular requirements for electrical appliances for use
with aquariums and garden ponds
AS/NZS 60335.2.56:2006 Household and similar electrical appliances - Safety - Particular requirements for projectors and similar appliances
AS/NZS 60335.2.59:2005 Household and similar electrical appliances - Safety - Particular requirements for insect killers
AS/NZS 60335.2.6:2008
Household and similar electrical appliances - Safety - Particular requirements for stationary cooking ranges, hobs, ovens
and similar appliances
AS/NZS 60335.2.6:2014 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.6: Particular requirements for stationary cooking ranges,
hobs, ovens and similar appliances
AS/NZS 60335.2.6:2014 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.6: Particular requirements for stationary cooking ranges,
hobs, ovens and similar appliances
AS/NZS 60335.2.60:2006 Household and similar electrical appliances - Safety - Particular requirements for whirlpool baths and whirlpool spas
AS/NZS 60335.2.61:2005 Household and similar electrical appliances - Safety - Particular requirements for thermal-storage room heaters
AS/NZS 60335.2.65:2006 Household and similar electrical appliances - Safety - Particular requirements for air-cleaning appliances
AS/NZS 60335.2.65:2015 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.65: Particular requirements for air-cleaning appliances
AS/NZS 60335.2.65:2015 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.65: Particular requirements for air-cleaning appliances
AS/NZS 60335.2.66:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.66: Particular requirements for water-bed heaters
AS/NZS 60335.2.67:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.67: Particular requirements for floor treatment machines,
for commercial use
AS/NZS 60335.2.67:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.67: Particular requirements for floor treatment machines,
for commercial use
AS/NZS 60335.2.68:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.68: Particular requirements for spray extraction machines,
for commercial use
AS/NZS 60335.2.68:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.68: Particular requirements for spray extraction machines,
for commercial use
AS/NZS 60335.2.69:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.69: Particular requirements for wet and dry vacuum
cleaners, including power brush, for commercial use
AS/NZS 60335.2.7:2012 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.7: Particular requirements for washing machines
AS/NZS 60335.2.70:2002 Household and similar electrical appliances - Safety - Particular requirements for milking machines
AS/NZS 60335.2.71:2002
Household and similar electrical appliances - Safety - Particular requirements for electrical heating appliances for
breeding and rearing animals
AS/NZS 60335.2.72:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.72: Particular requirements for floor treatment machines
with or without traction drive, for commercial use
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.72:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.72: Particular requirements for floor treatment machines
with or without traction drive, for commercial use
AS/NZS 60335.2.73:2005 Household and similar electrical appliances - Safety - Particular requirements for fixed immersion heaters
AS/NZS 60335.2.74:2005 Household and similar electrical appliances - Safety - Part 2.74: Particular requirements for portable immersion heaters
AS/NZS 60335.2.75:2005
Household and similar electrical appliances - Safety - Particular requirements for commercial dispensing appliances and
vending machines
AS/NZS 60335.2.76:2003 Household and similar electrical appliances - Safety - Particular requirements for electric fence energizers
AS/NZS 60335.2.77:2002
Household and similar electrical appliances - Safety - Particular requirements for pedestrian controlled mains-operated
lawnmowers
AS/NZS 60335.2.78:2005 Household and similar electrical appliances - Safety - Particular requirements for outdoor barbecues
AS/NZS 60335.2.79:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.79: Particular requirements for high pressure cleaners and
steam cleaners
AS/NZS 60335.2.8:2004
Household and similar electrical appliances - Safety - Particular requirements for shavers, hair clippers and similar
appliances
AS/NZS 60335.2.8:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.8: Particular requirements for shavers, hair clippers and
similar appliances
AS/NZS 60335.2.80:2004 Household and similar electrical appliances - Safety - Particular requirements for fans
AS/NZS 60335.2.80:2016 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.80: Particular requirements for fans
AS/NZS 60335.2.80:2016 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.80: Particular requirements for fans
AS/NZS 60335.2.81:2012 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and heating
mats
AS/NZS 60335.2.81:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and heating
mats
AS/NZS 60335.2.81:2015 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and heating
mats
AS/NZS 60335.2.81:2015 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.81: Particular requirements for foot warmers and heating
mats
AS/NZS 60335.2.82:2006
Household and similar electrical appliances - Safety - Particular requirements for amusement machines and personal
service machines
AS/NZS 60335.2.82:2015 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and
personal service machines
AS/NZS 60335.2.82:2015 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and
personal service machines
AS/NZS 60335.2.83:2002 Household and similar electrical appliances - Safety - Particular requirements for heated gullies for roof drainage
AS/NZS 60335.2.84:2006 Household and similar electrical appliances - Safety - Particular requirements for toilets
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.84:2014 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.84: Particular requirements for toilet appliances
AS/NZS 60335.2.84:2014 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.84: Particular requirements for toilet appliances
AS/NZS 60335.2.85:2005 Household and similar electrical appliances - Safety - Part 2.85: Particular requirements for fabric steamers
AS/NZS 60335.2.86:2002 Household and similar electrical appliances - Safety - Particular requirements for appliances for electric fishing machines
AS/NZS 60335.2.86:2013 Household and similar electrical appliances - Safety - Part 2.86: Particular requirements for electric fishing machines
AS/NZS 60335.2.87:2002 Household and similar electrical appliances - Safety - Particular requirements for electric animal-stunning equipment
AS/NZS 60335.2.89:2010 (Includes IEC text)
Household and similar electrical appliances - Safety - Particular requirements for commercial refrigerating appliances
with an incorporated or remote refrigerant condensing unit or compressor
AS/NZS 60335.2.9:2009
Household and similar electrical appliances - Safety - Particular requirements for grills, toasters and similar portable
cooking appliances
AS/NZS 60335.2.9:2014 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.9: Particular requirements for grills, toasters and similar
portable cooking appliances
AS/NZS 60335.2.9:2014 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.9: Particular requirements for grills, toasters and similar
portable cooking appliances
AS/NZS 60335.2.90:2006 Household and similar electrical appliances - Safety - Particular requirements for commercial microwave ovens
AS/NZS 60335.2.90:2015 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial microwave
ovens
AS/NZS 60335.2.90:2015 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial microwave
ovens
AS/NZS 60335.2.90:2017 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial microwave
ovens
AS/NZS 60335.2.90:2017 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.90: Particular requirements for commercial microwave
ovens
AS/NZS 60335.2.91:2008
Household and similar electrical appliances - Safety - Particular requirements for walk-behind and hand-held lawn
trimmers and lawn edge trimmers
AS/NZS 60335.2.92:2003
Household and similar electrical appliances - Safety - Particular requirements for pedestrian-controlled mains-operated
lawn scarifiers and aerators
AS/NZS 60335.2.94:2008 Household and similar electrical appliances - Safety - Particular requirements for scissors type grass shears
AS/NZS 60335.2.95:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.95: Particular requirements for drives for vertically moving
garage doors for residential use
AS/NZS 60335.2.96:2002
Household and similar electrical appliances - Safety - Particular requirements for flexible sheet heating elements for
room heating
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60335.2.97:2007
Household and similar electrical appliances - Safety - Particular requirements for drives for rolling shutters, awnings,
blinds and similar equipment
AS/NZS 60335.2.98:2005 Household and similar electrical appliances - Safety - Particular requirements for humidifiers
AS/NZS 60598.1:2017 Luminaires - Part 1: General requirements and tests
AS/NZS 60598.2.1:2014 Luminaires - Part 2.1: Particular requirements - Fixed general purpose luminaires
AS/NZS 60598.2.10:2015 Luminaires - Part 2.10: Particular requirements - Portable luminaires for children
AS/NZS 60598.2.17:2006
Luminaires - Particular requirements - Luminaires for stage lighting, television, film and photographic studios (outdoor
and indoor)
AS/NZS 60598.2.18:1998 Luminaires - Particular requirements - Luminaires for swimming pools and similar applications
AS/NZS 60598.2.19:2001 Luminaires - Particular requirements - Air handling luminaries (safety requirements)
AS/NZS 60598.2.2:2001 Luminaires - Particular requirements - Recessed luminaires
AS/NZS 60598.2.2:2016 Luminaires - Part 2.2: Particular requirements - Recessed luminaires
AS/NZS 60598.2.20:2002 Luminaires - Particular requirements - Lighting chains
AS/NZS 60598.2.22:2005 Luminaires - Particular requirements - Luminaires for emergency lighting
AS/NZS 60598.2.23:2002 Luminaires - Particular requirements - Extra low voltage lighting systems for filament lamps
AS/NZS 60598.2.25:2001 Luminaires - Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
AS/NZS 60598.2.4:2005 Luminaires - Particular requirements - Portable general purpose luminaires
AS/NZS 60598.2.5:2002 Luminaires - Particular requirements - Floodlights
AS/NZS 60598.2.6:1998 Luminaires - Particular requirements - Luminaires with built-in transformers for filament lamps
AS/NZS 60598.2.7:2005 Luminaires - Particular requirements - Portable luminaires for garden use
AS/NZS 60598.2.8:2015 Luminaires - Part 2.8: Particular requirements - Handlamps
AS/NZS 60598.2.9:2006 Luminaires - Particular requirements - Photo and film luminaires (non-professional)
AS/NZS IEC 60601.2.1:2015
Medical electrical equipment - Part 2.1: Particular requirements for the basic safety and essential performance of
electron accelerators in the range 1 MeV to 50 MeV
AS/NZS IEC 60601.2.16:2015
Medical electrical equipment - Part 2.16: Particular requirements for the basic safety and essential performance of
haemodialysis, haemodiafiltration and haemofiltration equipment
AS/NZS IEC 60601.2.17:2015
Medical electrical equipment - Part 2.17: Particular requirements for the basic safety and essential performance of
automatically-controlled brachytherapy afterloading equipment
AS/NZS IEC 60601.2.18:2015
Medical electrical equipment - Part 2.18: Particular requirements for basic safety and essential performance of
endoscopic equipment
AS/NZS IEC 60601.2.2:2016
Medical electrical equipment - Part 2.2: Particular requirements for the basic safety and essential performance of high
frequency surgical equipment and high frequency surgical accessories
AS/NZS IEC 60601.2.21:2015
Medical electrical equipment - Part 2.21: Particular requirements for the basic safety and essential performance of
infant radiant warmers
AS/NZS IEC 60601.2.25:2016
Medical electrical equipment - Part 2.25: Particular requirements for the basic safety and essential performance of
electrocardiographs
AS/NZS IEC 60601.2.27:2016
Medical electrical equipment - Part 2.27: Particular requirements for the basic safety and essential performance of
electrocardiographic monitoring equipment
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS IEC 60601.2.28:2015
Medical electrical equipment - Part 2.28: Particular requirements for the basic safety and essential performance of X-ray
tube assemblies for medical diagnosis
AS/NZS IEC 60601.2.29:2015
Medical electrical equipment - Part 2.29: Particular requirements for the basic safety and essential performance of
radiotherapy simulators
AS/NZS IEC 60601.2.31:2016
Medical electrical equipment - Part 2.31: Particular requirements for the basic safety and essential performance of
external cardiac pacemakers with internal power source
AS/NZS IEC 60601.2.45:2015
Medical electrical equipment - Part 2.45: Particular requirements for basic safety and essential performance of
mammographic X-ray equipment and mammographic stereotactic devices
AS/NZS IEC 60601.2.8:2015
Medical electrical equipment - Part 2.8: Particular requirements for the basic safety and essential performance of
therapeutic X-ray equipment operating in the range 10 kV to 1 MV
AS/NZS 60695.1.1:2001 Fire hazard testing - Guidance for assessing the fire hazard of electrotechnical products - General guidelines
AS/NZS 60695.10.2:2004
Fire hazard testing - Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical
products involved in fires - Abnormal heat - Ball pressure test
AS/NZS 60695.11.10:2001 Fire hazard testing - Test flames - 50 W horizontal and vertical flame test methods
AS/NZS 60695.11.2:2004
Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and
guidance
AS/NZS 60695.11.20:2001 Fire hazard testing - Test flames - 500 W flame test methods
AS/NZS 60695.11.3:2004 Fire hazard testing - Test flames - 500 W flames - Apparatus and confirmational test methods
AS/NZS 60695.11.4:2004 Fire hazard testing - Test flames - 50 W flames - Apparatus and confirmational test methods
AS/NZS 60695.11.5:2005 Fire hazard testing - Test flames - Needle-flame test method - Apparatus, conformity test arrangement and guidance
AS/NZS 60695.2.10:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire apparatus and common test procedure
AS/NZS 60695.2.11:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for end products
AS/NZS 60695.2.12:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for materials
AS/NZS 60695.2.13:2001 Fire hazard testing - Glowing/hot wire based test methods - Glow-wire ignitability test method for materials
AS/NZS 60695.4:2002 Fire hazard testing - Terminology concerning fire tests
AS/NZS 60702.1:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Cables
AS/NZS 60702.2:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Terminations
AS/NZS IEC 60754.1:2017
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas
content
AS/NZS IEC 60754.2:2017
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH
measurement) and conductivity
AS/NZS 60898.1:2004
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-
breakers for a.c. operation
AS/NZS 60898.2:2004
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-
breakers for a.c. and d.c. operation
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
AS/NZS 60922:1998
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety
requirements
AS/NZS 60923:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
AS/NZS 61000.6.1:2006
Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential, commercial and light industrial
environments
AS/NZS 61000.6.3:2012
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for residential, commercial and
light-industrial environments
AS/NZS IEC 61034.1:2017 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
AS/NZS IEC 61034.2:2017 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
NZS 6104:1981 Specification for emergency electricity supply in buildings
AS/NZS 61046:2001
Auxiliaries for lamps - D.C. or A.C. supplied electronic step-down convertors for filament lamps - General and safety
requirements
AS/NZS 61347.1:2016 Lamp controlgear - Part 1: General and safety requirements
AS/NZS 61347.2.1:2002 Lamp controlgear - Particular requirements for starting devices (other than glow starters)
AS/NZS 61347.2.10:2004
Lamp controlgear - Particular requirements for electronic invertors and convertors for high-frequency operation of cold
start tubular discharge lamps (neon tubes)
AS/NZS 61347.2.11:2003 Lamp controlgear - Particular requirements for miscellaneous electronic circuits used with luminaires
AS/NZS 61347.2.2:2007 Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
AS/NZS 61347.2.3:2016
Lamp controlgear - Part 2.3: Particular requirements for a.c. and/or d.c. supplied electronic controlgear for fluorescent
lamps
AS/NZS 61347.2.8:2003 Lamp controlgear - Particular requirements for ballasts for fluorescent lamps
AS/NZS 61347.2.9:2004 Lamp controlgear - Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
AS/NZS 61386.1:2015 Conduit systems for cable management - Part 1: General requirements
AS/NZS 61386.21:2015 Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems
AS/NZS 61386.22:2015 Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems
AS/NZS 61386.23:2015 Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems
AS/NZS 61439.1:2016 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
AS/NZS 61439.3:2016
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary
persons (DBO)
AS/NZS IEC 61439.5:2016 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
AS/NZS IEC 61439.6:2016 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)
NZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters (alternating current only)
AS/NZS 6400:2016 Water efficient products - Rating and labelling
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS 6703:1984 Code of practice for interior lighting design
NZS 6801:2008 Acoustics - Measurement of environmental sound
NZS 6802:2008 Acoustics - Environmental noise
NZS 6803:1999 Acoustics - Construction noise
NZS 7601:1978 Specification for polyethylene pipe (Type 3) for cold water services
NZS 7602:1977 Specification for polyethylene pipe (Type 5) for cold water services
NZS 7603:1979 Specification for refuse bags for local authority collection (low density polyethylene)
NZS 7610:1991 Blue polyethylene pipes up to nominal size 63 for below ground use for potable water
NZS 7643:1979 Code of practice for the installation of unplasticized PVC pipe systems
NZS 7646:1978 Specification for polyethylene pipes and fittings for gas reticulation
AS/NZS 7671:2010 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
AS/NZS 8008(Int):2014 Timber - Finger-jointed structural timber - Performance requirements
NZS 8500:2006 Safety barriers and fences around swimming pools, spas and hot tubs
SNZ HB 8630:2004 Tracks and outdoor visitor structures
SA/SNZ HB 90.1:2012 The small business handbook - Guide to ISO 9001:2008
AS/NZS ISO 9001:2008 Quality management systems - Requirements
AS/NZS ISO 9001:2016 Quality management systems - Requirements
NZS 9201.1:2007 Model general bylaws - Introduction
NZS 9201.11:2000 Model general bylaws - Fires in the open air
NZS 9201.12:1999 Model general bylaws - Control of dogs
NZS 9201.13:1999 Model general bylaws - The keeping of animals, poultry and bees
NZS 9201.14:1999 Model general bylaws - Cemeteries and crematoria
NZS 9201.2:1999 Model general bylaws - Public places
NZS 9201.22:1999 Model general bylaws - Wastewater drainage
NZS 9201.23:2004 Model general bylaws - Trade waste
NZS 9201.24:1999 Model general bylaws - Food safety
NZS 9201.25:2007 Model general bylaws - Traffic
NZS 9201.27:2000 Model general bylaws - On-site wastewater disposal systems
NZS 9201.28:2007 Model general bylaws - Speed
NZS 9201.29:2007 Model general bylaws - Liquor control
NZS 9201.3:1999 Model general bylaws - Hostels
NZS 9201.4:1999 Model general bylaws - Trading in public places
NZS 9201.6:1999 Model general bylaws - Solid waste
NZS 9201.7:2007 Model general bylaws - Water supply
NZS 9201.8:1999 Model general bylaws - Control of advertising signs
NZS 9202:2003 Model Standing Orders for Meetings of Local Authorities and Community Boards
SNZ HB 9213:2003 Guide to Local Government Service Delivery Options
Since this list of Standards was compiled, the Standards available online may have been updated to the latest edition (including amendments and provisional editions). Similarly new Standards may have been added and old Standards deleted.
NZS/BS 970.1:1991
Specification for wrought steels for mechanical and allied engineering purposes - General inspection and testing
procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
AS/NZS ISO 9972:2015 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method