STANDARD WATER MAIN and SANITARY SEWER SPECIFICATIONS for...
-
Upload
duongkhanh -
Category
Documents
-
view
212 -
download
0
Transcript of STANDARD WATER MAIN and SANITARY SEWER SPECIFICATIONS for...
STANDARD
WATER MAIN
and
SANITARY SEWER SPECIFICATIONS
for the
CITY OF MONROE, GEORGIA
NOVEMBER 2001 Revised November 2007
Standard Water and Sewer Specifications Page 14
City of Monroe, Georgia April 2001 Rev. November 2007
B.9.2. Copies must be clear, clean, and legible B.9.3. Drawings shall include a site plan of the water or sanitary sewer lines and
appurtenances as they were installed with any shop drawings needed for clarification or as requested by the Utility.
B.9.4. As-builts must be stamped by a Professional Engineer registered in the
State of Georgia. B.9.5. In addition to a printed set, a copy of the as-built drawings showing all
existing and new water and sewer lines, streets, drainage, easements and topographic information shall be submitted to the Utility in AutoCAD 2006 format on a clearly labeled CD-ROM disk. The files must be georeferenced to the earth’s surface using State Plane 1983 Coordinate System (feet).