Standard series Combination wrenches Wrenches Fast...
Transcript of Standard series Combination wrenches Wrenches Fast...
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 1/24
FACOM - Fabricant d'outils et d'équipements pour les professionnels
Wrenches
Combination wrenches
Standard series
40 Metric OGV combination wrenches
40 Inch OGV combination wrenches
440 Metric OGV combination wrenches
440 Inch OGV combination wrenches
Fast series
40R Metric fast combination wrenches
Compact series
39 Metric short combination wrenches
39 Inch short combination wrenches
Offset series
41 Metric offset combination wrenches
Power series
40LA Metric long combination wrenches
40LA Inch long combination wrenches
41L Metric heavy-duty combination wrenches
Ratchet wrenches
Ratchet combination wrench series
467 Ratchet combination wrenches
Set of 2 adaptors for wrench 10 mm - square 1/4
67 Ratchet combination wrenches
Short ratchet combination wrench series
467S Short ratchet combination wrenches
Hinged ratchet combination wrench series
467F Hinged ratchet combination wrenches
Ratchet ring wrench series
464 Ratchet ring wrench 14X19
Open-end wrenches
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 2/24
Standard series
44 Metric open-end wrenches
44 Inch open-end wrenches
Low-profile series
31 Metric low-profile open-end wrenches
Compact series
22 Metric midget wrenches with open ends at 15°
22 Inch midget wrenches with open ends at 15°
34 Metric midget wrenches with open ends at 15° and 75°
34 Inch midget wrenches with open ends at 15° and 75°
Power series
45 Heavy-duty open-end wrenches
Ring wrenchesStandard series
55A Metric OGV® offset-ring wrenches
55A Inch OGV® offset-ring wrenches
Compact series
59 Metric straight ring wrenches
59TX Torx® ring wrenches
Half-moon series
57 Metric half-moon ring wrenches
Power series
54 Metric heavy-duty offset ring wrenches - Wrench
54 Metric heavy-duty offset ring wrenches - Handle
Ratchet series
68B Metric 12-point ring wrenches
68B Inch 12-point ring wrenches
68BH Metric 6-point ring wrenches
64 Metric 12-point ring wrenches
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 3/24
64 Inch 12-point ring wrenches
Angled socket and socket wrenchesStandard series
75 Forged metric 6 x 6 point OGV® angled open-socket wrenches
75 Forged inch 6 x 6 point OGV® angled open-socket wrenches
76 Forged metric 12 x 6 point OGV® angled open-socket wrenches
Box wrench series
92A Metric angled box wrenches
Tee socket series
97 Metric double-ended forged socket wrenches
160A Bars for wrenches 91A, 92A and 97
Socket wrenchesUniversal joint series
99C Tee socket-wrench with universal joint
Nut spinner series
74 Metric forged 6-point nut spinners
74 Inch forged 6-point nut spinners
74T Metric forged tee-handled 6-point nut spinners
94A Metric box-shank nut spinners
Flare nut wrenchesRatchet series
70A Metric ratchet flare-nut wrenches
Standard series
43 Flanged flare-nut wrenches
42 Metric flare-nut wrenches angled at 15°
42 Inch flare-nut wrenches angled at 15°
Variable-opening wrenchesMonkey wrench series
105 Monkey wrenches
Locking series
114.8 Lock-grip wrench
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 4/24
Adjustable series
113A.C Chromed adjustable wrenches
113A.CG Sheathed and chromed adjustable wrenches
113A.T Phosphated adjustable wrenches
113A.TG Sheathed and phosphated adjustable wrenches
Hook and pin wrenchesSeries for side slot nuts
125A Hinged hook wrenches
115A Adjustable hook wrench
119 Heavy-duty hook wrench
Series for side-hole nuts
126A Hinged pin wrenches
116 Sliding-jaw pin wrench
Series for top-hole nuts
117.B Wrenches for nuts with top holes
118A Wrench for nuts with top slots
Slogging wrenchesRing series
50 Metric and inch slogging ring wrenches
51A Thin-wall slogging ring wrenches
Ratchets and sockets1/4" square drive Radio range
1/4" square drive ratchets
R.161 Palm-control ratchet
R.151 Ratchet
R.155 Metal-grip ratchet
R.157 Long-reach metal-grip ratchet
R.158 Long-reach metal-grip hinged ratchet
R.150 Finger-control ratchet
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 5/24
1/4" square drive accessories
R.120A Sliding tee
R.140A Hinged handle
R.142 Hinged handle
R.236 Short spinner 158 mm
R.227 Long spinner 260 mm
R.222 Flexible spinner 265 mm
R.110 Speed brace
R.229A Long-reach tee with universal joint
R.228 Extension 470 mm with universal joint
R.RC Locking extension 1/4"
R Extensions 1/4"
R.S Wobble extensions 1/4"
R.216 Flexible extension 150 mm
R.240A Universal joint
R.232 Coupler 1/4" to 3/8"
D.169 Set of 3 couplers
R.235 Bit holder 1/4" (6.35 mm)
R.245 Bit holder with retaining ring - 1/4" (6.35 mm)
EF.R Lock-ring bit holder
1/4" square drive OGV® sockets
RB 1/4" drive inch 12-point OGV sockets
R.F 1/4" drive hinged inch 12-point OGV® sockets
R Metric OGV® 6-point sockets
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 6/24
R Metric OGV® 12-point sockets
R Inch OGV® 6-point sockets
R Inch OGV® 12-point sockets
RLA Long-reach metric 6-point OGV® sockets
RLA Long-reach inch 6-point OGV® sockets
1/4" square drive Torx® sockets
RTX Torx® sockets 1/4"
1/4" square drive removable bits
RS Bits for slotted heads
RP Bits for Phillips® heads
RD Bits for Pozidriv® heads
RT Bits for hexagon socket heads
RX Bits for Torx® heads
3/8" square drive Junior range
3/8" square drive ratchets
J.161 Palm-control ratchet
J.151A Ratchet
J.161L Long-reach palm-control ratchet
J.161E Short-reach palm-control ratchet
J.153A Hinged ratchet
J.155 Metal-grip ratchet
J.157 Long-reach metal-grip ratchet
J.158 Long-reach metal-grip hinged ratchet
J.159 Long-reach metal-grip swivel-head ratchet
J.156 Ratchet attachment 3/8"
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 7/24
3/8" square drive accessories
Spring-clip bit holders
J.140A Hinged handle
J.145 Metal-grip hinged handle
J.120 Sliding tee
J.222 Flexible spinner
J.110A Speed brace
J.115 Metal-grip speed brace
J.228 Long extension with universal joint
J.229A Long-reach tee with universal joint
J.RC Locking extensions
J.S Wobble extensions
J. Extensions
J.216 Flexible extension
J.240A Universal joint
EF.J Lock-ring bit holder
Coupler 3/8" to 1/4"
J.232 Coupler 3/8" to 1/2"
D.169 Set of 3 couplers
3/8" square drive OGV® sockets
J Inch OGV® 12-point sockets
J Metric OGV® 6-point sockets
J Metric OGV® 12-point sockets
J Inch OGV® 12-point sockets
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 8/24
J.HLA Long-reach metric 6-point OGV® sockets
J.HLA Long-reach metric 12-point OGV® sockets
JLA Long-reach inch 12-point OGV® sockets
3/8" square drive Torx® sockets
JTX Torx® sockets
3/8" Bit
JS Bits for slotted heads
JP Bits for Phillips® heads
JD Bits for Pozidriv® heads
JT Bits metric and inch for hexagon socket heads
JX Bits for Torx® heads
CDX rangeCDX ratchets
SJ.171 Locking ratchet
SJ.174 Long-reach locking ratchet
CDX accessories
SJ Locking extensions
SJ.240 Universal joint
SJ.232 Coupler CDX to 1/2"
SJ.120 Sliding tee
SJ Bit holders
CDX sockets
SJ 6-point metric OGV® sockets
SJ 12-point metric OGV® sockets
1/2" square drive Standard range1/2" square drive ratchets
S.171 Safety lock-pack ratchet
S.161 Palm-control ratchet
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 9/24
S.151 Ratchet
SM.150 Ratchet "Building site"
S.154 Long-reach ratchet
S.143A Palm-control hinged ratchet
S.153A Long-reach palm-control hinged ratchet
S.155 Metal-grip ratchet
S.157 Long-reach metal-grip ratchet
S.158 Long-reach hinged metal-grip ratchet
S.156 Ratchet attachment 1/2"
1/2" square drive accessories
S.110 Speed brace
S.140A Short hinged handle
S.141A Long hinged handle
S.145 Long metal-grip hinged handle
S.120A Sliding tee
S.228 Extra-long tee with universal joint
S.229A Long-reach tee with universal joint
S Locking extensions
S Chamfered extensions
S Extensions
S.240A Universal joint
S.230 Coupler 1/2" to 3/8"
S.231 Coupler 1/2" to CDX
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 10/24
S.232B Coupler 1/2" to 3/4"
D.169 Set of 3 couplers
S.234 Offset adaptor
S Bit holders
EF.S Lock-ring bit holder
1/2" square drive OGV® sockets
S 6-point metric OGV® sockets
S 12-point metric OGV® sockets
S 6-point inch OGV® sockets
S 12-point inch OGV® sockets
S Long-reach 6-point metric OGV® sockets
S Long-reach 12-point metric OGV® sockets
S Long-reach 12-point inch OGV® sockets
1/2" square drive Torx® sockets
STX Manual Torx® sockets
GSX Torx® machine sockets
1/2" square drive bits
STM Metric bits for hexagon socket heads
ST Inch bits for hexagon socket heads
SHP Long-reach bits for hexagon socket heads
SXM Bits for Torx® heads
SXLA Long-reach Torx® bits
SVB Bits for XZN® spline sockets
SVLB Long-reach bits for XZN® spline sockets
3/4" square drive Truck range
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 11/24
3/4" square drive ratchets
K.149 Ratchet 3/4 "Construction"
K.152 Compact reversible ratchet
K.151B Reversible ratchet
K.154B Reversible ratchet with handle
K.150A "Construction" reversible ratchet
3/4" square drive accessories
K.120B Sliding tee
K.130A Angle bar
K.200E Fixed adaptor
K.140A Hinged adaptor
K Bars
K.B Extensions
K.240A Universal joint
K.230B Coupler 3/4" à 1/2"
K.232A Coupler 3/4" to 1"
3/4" square drive sockets
K.B 6-point metric OGV® sockets
K.B 12-point metric OGV® sockets
K.B 12-point inch OGV® sockets
KLA Long-reach 6-point OGV® metric sockets
KT.A Hexagon bits
Impact rangeImpact sockets and accessories 3/8"
3/8" drive impact couplers
3/8" drive impact extensions
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 12/24
3/8" drive impact universal joint
3/8" drive impact bit-holders
NJ.A 3/8" drive metric 6-point impact sockets
Impact sockets and accessories 1/2"
1/2" drive impact extensions
NSB 1/2" drive long-reach metric thin-wall 6-point impact sockets
1/2" drive impact couplers
1/2" drive impact universal joint
1/2" drive impact bit-holders
NS.A 1/2" drive metric 6-point impact sockets
NS.A 1/2" drive inch 6-point impact sockets
NS.LA 1/2" drive long-reach metric 6-point impact sockets
Impact sockets and accessories 3/4"
3/4" drive impact couplers
3/4" drive impact extensions
3/4" drive impact universal joint
NK.A 3/4" drive metric 6-point impact sockets
NK.A 3/4" drive inch 6-point impact sockets
NK.LA 3/4" drive long-reach metric 6-point impact sockets
NKD.A 3/4" drive metric 12-point impact sockets
Impact sockets and accessories 1"
NM.LA 1" drive long-reach metric and inch 6-point impact sockets
1" drive impact couplers
1" drive impact extensions
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 13/24
1" drive impact universal joint
NM.ELA 1" drive extra-long reach metric 6-point impact sockets
NM.A 1" drive metric 6-point impact sockets
NM.A 1" drive inch 6-point impact sockets
Impact sockets and accessories 1" ½
NG.A 1"1/2 drive metric 6-point impact sockets
1"1/2 drive impact couplers
1" 1/2 drive impact extensions
1" 1/2 drive impact universal joint
Torque controlTorque wrenches
Release-type wrenches
648 Release-type wrenches
High precision automatic reset wrenches
306A Automatic reset wrenches with removable ratchet
306D Automatic reset wrenches without accessories
306R Automatic reset wrenches with 20 X 7 fitting
306U Wrenches with reversible ratchets graduated LBF.in and LBF.FT
Workshop automatic reset wrenches
208 Automatic reset wrenches with fixed ratchet
208D Automatic reset wrenches without accessories
208A Automatic reset wrenches with removable ratchet
Non-graduated automatic reset wrenches
248D Production wrenches
446 Wide-angle production wrenches
Manual reset wrenches
203A Manual reset wrenches with removable square drive
202A Manual reset wrenches with removable ratchet
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 14/24
214A Extensions for series 203 wrenches
Dial-type torque wrenches
250A Dial torque wrenches
J.156 Ratchet attachment 3/8"
S.156 Ratchet attachment 1/2"
High-torque wrenches and multipliers
High-torque wrenches with ratchet and square drive
Wrenches without accessories
Wrenches with square drive
Accessories
9x12 accessories
S.305P Pivot knob
Ratchets
Compact ratchets
Square drives
10 Open ends
12 Ring ends
14x18 accessories
S.382 Ratchet
Compact ratchets
Square drives
11 Open ends
13 Ring ends
20x7 accessories
200P Pivot knob
Ratchets
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 15/24
Square drives
Adaptors
20 Open ends
Specialist accessories
18 "Crowfoot" flare-nut ends mm and inch
D.360L Side-graduated 1/2" protractor attachment
DM.360L Side-graduated 1/2" protractor attachment with magnet and flexible arm
DMP.360L 1/2" protractor attachment
Torque driversVernier torque drivers
Micro-Tech® bit drivers
ECR.0 Socket adapter
A.400 Maintenance driver
ECR Square 1/4" - hexagon 1/4" socket adapter
Non-graduated drivers
Micro-Tech® bit drivers
A.440 Production driver
Screwdrivers, keys and bitsPROTWIST® screwdrivers
PROTWIST® screwdrivers for slotted heads
AN For slotted heads - machined blades
ANF For slotted heads - forged blades
AW For slotted heads - hexagonal blades
AWH Power series for slotted heads
AN For slotted heads - short blades
PROTWIST® screwdrivers for Phillips® heads
ANP For Phillips® heads - round blades
AWP For Phillips® heads - hexagonal blades
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 16/24
AWPH For Phillips® heads - power series
ANP For Phillips® heads - short blades
PROTWIST® screwdrivers for Posidriv® heads
AND For Pozidriv® heads - round blades
AWD For Pozidriv® heads - hexagonal blades
AWDH For Pozidriv® heads - power series
AND For Pozidriv® heads - short blades
PROTWIST® screwdrivers for square drive heads
ANSQ For square drive heads
PROTWIST® screwdrivers for Torx® and Resistorx® heads
ANX For Torx® heads
ANXP For Torx Plus® heads
ANXR For Resistorx® heads
ANXRP For Torx Plus® Tamper Resistant heads
PROTWIST® screwdrivers - sand-blasted tips
AS - ASF For slotted heads
ASP For Phillips® heads
ASD For Pozidriv® heads
ASX For Torx® heads
PROTWIST® 1000V insulated screwdrivers for slotted head
A.VE Screwdrivers for slotted heads
PROTWIST® 1000V insulated screwdrivers for cross-heads
AP.VE Screwdrivers for Phillips® heads
AD.VE Screwdrivers for Pozidriv® heads
BORNEO® screwdrivers for electrical terminals
APB For combination slotted/Phillips® heads
ADB For combination slotted/Pozidriv® heads
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 17/24
Multi-blade Screwdrivers
AM.D Blade handle
AM Bit driver
ACL.1 Ratchet bit drivers
ENDURO® screwdrivers
ENDURO® screwdrivers for slotted heads
ACZ For slotted heads
ACZH Power series for slotted heads
ENDURO® screwdrivers for Phillips® heads
ACZP For Phillips® heads
ACZPH Power series for Phillips® heads
ENDURO® screwdrivers for Pozidriv® heads
ACZD For Pozidriv® heads
ACZDH Power series for Pozidriv® heads
ENDURO® screwdrivers for Torx® and Torx® tamper resistant heads
ACZX For Torx® heads
ACZXR For Torx® tamper resistant (Resistorx) heads
ERGOTWIST® screwdrivers
ERGOTWIST® screwdrivers for slotted heads
AZ - AZE For slotted heads - machined blades
AZ For slotted heads - extra-long machined blades
AZF For slotted heads - forged blades
AZFH For slotted heads - forged blades with hexagon shoulder
AZB For slotted heads - short blades
ERGOTWIST® screwdrivers for Phillips® heads
AZP-AZPE For Phillips® heads
AZPH For Phillips® heads - blades with hexagon shoulder
AZPB For Phillips® heads - short blades
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 18/24
ERGOTWIST® screwdrivers for Posidriv® heads
AZD For Pozidriv® heads
AZDH For Pozidriv® heads - blades with hexagon shoulder
AZDB For Pozidriv® heads - short blades
ERGOTWIST® screwdrivers for Torx® and Torx® tamper resistant heads
AZX For Torx® heads
AZXR For Torx® tamper resistant (Resitorx®) heads
1000V insulated screwdriversVE 1000V insulated screwdrivers for slotted heads
AY.VE Screwdrivers for slotted heads
VE 1000V insulated screwdrivers for Phillips® heads
APY.VE Screwdrivers for Phillips® heads
VE 1000V insulated screwdrivers for Pozidriv® heads
ADY.VE Screwdrivers for Pozidriv® heads
BORNEO® screwdrivers for electrical terminals
APYB For combination slotted/Phillips® heads
ADYB For combination slotted/Pozidriv® heads
Isoryl screwdriversISORYL screwdrivers for slotted heads
AR For slotted heads - machined blades
AG For slotted heads - forged blades
AGT For slotted heads - forged blades - tee-handle
ARB For slotted heads - short blades
AB For slotted heads - ribbed blades
ABB For slotted heads - short ribbed blades
ARA For slotted heads - pocket-clip handle
ISORYL screwdrivers for Phillips® heads
AP For Phillips® heads
APB For Phillips® heads - short blades
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 19/24
AX For Phillips® heads - ribbed blades
AXB For Phillips® heads - Short ribbed blades
ISORYL screwdrivers for Pozidriv® heads
AD For Pozidriv® heads
ADB For Pozidriv® heads - short blades
Wood-handle screwdrivers
Wood-handel screwdrivers for slotted heads
ATH For slotted heads - forged blades
ATHH For slotted heads - forged blades with hexagon shoulder
AGH For slotted heads - "High torque" forged blades with hexagon shoulder
Wood-handle screwdrivers for Phillips® heads
ATHH.P For Phillips® heads - blades with hexagon shoulder
Wood-handle screwdrivers for Pozidriv® heads
ATHH.D For Pozidriv® heads - blades with hexagon shoulder
Multi-blade Screwdrivers
AMZ Reversible blades
AMZ.D Blade handle
AMR "Radio" model
AMJ "Junior" model
AMS "Standard" model
AMM "Mammoth" model
AMM.J 3/8" "Junior" socket adapter
Miscellaneous screwdrivers
Spiral ratchet screwdriver
AAM.PE Spiral ratchet driver for 1/4" hexagon bits
Offset screwdrivers
ARZ - AKZ Offset screwdrivers for slotted heads
APZ Offset screwdrivers - for Phillips® heads
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 20/24
KeysHexagonal keys
83S.L Metric extra-long hexagonal keys with spherical head
83SH Metric long hexagonal keys with spherical head
83SH Inch long hexagonal keys with spherical head
83H Metric long hexagonal keys
83H Inch long hexagonal keys
82H Metric short hexagonal keys
82H Inch short hexagonal keys
82 Metric short hexagonal keys
Torx® keys
89 Short Torx® keys
89S Long Torx® keys - spherical head
89R Short Torx® Tamper Resistant (Resistorx®) keys
Nut spinners - Tee-handle keys
84TZ Standard metric hexagonal keys
84TZS Metric hexagonal keys with spherical head
84TZ Standard inch hexagonal keys
84TC Metric tee-handle hexagon keys
89TX Tee-handle Torx® drivers
84 Metric hexagonal drivers
84 Inch hexagonal drivers
88 Metric hexagonal drivers with spherical head
Special pattern keys
80.JL7 Set of keys for spline sockets (XZN)
81.JL7 Set of keys for groove sockets
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 21/24
85.JU10 Set of Bristol keys
Bits
Standard 1-series, 1/4" (6.35 mm) drive bits
ES.1 Bits for slotted heads
EP.1 Bits for Phillips® heads
ED.1 Bits for Pozidriv® heads
EXR.1 Bits for Torx® Tamper Resistant (Resistorx®) heads
EH.1 Metric bits for hexagon socket heads
EH.1 Inch bits for hexagon socket heads
ETS.1 Bits for hexagon socket heads
ECAR.1 Bits for square drive fasteners
ES.1 Bits for slotted head screws
ETOR Bits for Torqset heads®
EX.1 Bits for Torx® heads
1-series, 1/4" (6.32 mm) drive torsion bits
ES.1T High Perf' bits for slotted heads
ES.18T Extra-hard torsion bits for slotted heads
ES.12T Titanium torsion bits for slotted heads
EP.1T Torsion bits for Phillips® heads
EP.15T Extra-hard torsion bits for Phillips® heads
EP.13T Titanium torsion bits for Phillips heads
ED.1T Torsion bits for Pozidriv® heads
ED.15T Extra-hard torsion bits for Pozidriv® heads
ED.13T Titanium torsion bits for Pozidriv® heads
1-series, 1/4" (6.35 mm) drive bit set
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 22/24
AFM.2 Magnetic bit driver
Accessories for 1-series, 1/4" (6.35 mm) drive bits
Spring-clip bit holders
EF Bit holders with lock-ring
EF.6P5 Bit holder with lock-ring
EF.6P6 Magnetic bit holder with lock-ring
EF.6P1 Short-reach bit holder with spring clip
EF.6P3 Magnetic bit-holder
EF.6P4 Magnetic bit-holder
AMZ Bit drivers
ECR Square 1/4" - drive 1/4" socket adapter
68A.PE Ratchet wrench 1/4" and 5/16" drive
6-series, 1/4" (6.35 mm) drive bits with groove
ES.6 Bits for slotted heads
EP.6 Bits for Phillips® heads
EP.6T Extra-hard bits for Phillips® heads
EP.6T Titanium bits for Phillips® heads
ED.6 Bits for Pozidriv® heads
ED.6T Extra-hard bits for Pozidriv® heads
ED.6T Titanium bits for Pozidriv® heads
EX.6 Bits for Torx® heads
EH.6 Bits for hexagon socket heads
ECAR.6 Bits for square drive fasteners
6-series 1/4" (6.35 mm) drive nut setters and square drive adaptors with groove
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 23/24
EF.6D Hex nut setters
EF.6DM Magnetic hex nut setters
EF.6R 1/4" square drive adaptor
EF.6RL Long-reach 1/4" square drive adaptor
EF.6J 3/8" square drive adaptor
EF.6JL Long-reach 3/8" square drive adaptor
2-series, 5/16" (7.94 mm) drive bits
ES.2 Bits for slotted heads
EP.2 Bits for Phillips® heads
ED.2 Bits for Pozidriv® heads
EX.2 Bits for Torx® heads
EH.2 Bits for metric hexagon socket heads
EH.2 Bits for inch hexagon socket heads
EH.2L Long-reach bits for hexagon socket heads
EV.2 Bits for spline socket heads (XZN®)
EV.L Long-reach bits for spline socket heads (XZN®)
J-SJ-S Bit holders with spring clip for 2-series 5/16" (7.94 mm) drive bits
2-series, 5/16" (7.94 mm) drive impact bits
ENS.2 Bits for slotted heads
ENP.2 Bits for Phillips® heads
END.2 Bits for Pozidriv® heads
ENH.2 Bits for hexagon socket heads
ENX.2 Bits for Torx® heads
NJ-NS.236A Impact bit-holders
List of 3D Parts Catalogs available on http://www.tracepartsonline.net CAD portal
http://www.tracepartsonline.net, Free CAD Parts Library with 2D drawings and 3D models for ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON | CADdy | CadKey| Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa | MegaCAD |MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics | Vectorworks |VISI | VX …
Page 24/24
3-series, 1/2" (12.7 mm) drive impact bits
ENS.3 Bits for slotted heads
ENH.3 Bits for metric hexagon socket heads
ENH.3 Bits for inch hexagon socket heads
NEX Bits for Torx® heads
NJ-NS.237A Impact bit-holders