dl3.traceparts.comdl3.traceparts.com/dl/traceparts/tpdvd/pdf/NewParts_v261_v259_Web.… ·...

Part nameManufacturer Applicable Standard(s)

List of new parts families added to TraceParts DVD v2.6.1 since v2.5.9Category

Page 1 / 518

Roller chain - Double strandASME B29.100-2002 Chain drives and their components

Entranements par chane et leurs composants

Catene e componenti

Roller chain - Double strand

Roller chain - Double strand

Cadenas y componentes Roller chain - Double strand

Kettengetriebe und Bauteile Roller chain - Double strand

Roller chain - Double strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Double strand (inch series)

Roller chain - Double strand (inch series)

Cadenas y componentes Roller chain - Double strand (inch series)

Kettengetriebe und Bauteile Roller chain - Double strand (inch series)

Roller chain - Quadruple strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Quadruple strand

Roller chain - Quadruple strand

Cadenas y componentes Roller chain - Quadruple strand

Kettengetriebe und Bauteile Roller chain - Quadruple strand

Roller chain - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Quadruple strand (inch series)

Roller chain - Quadruple strand (inch series)

Cadenas y componentes Roller chain - Quadruple strand (inch series)

Kettengetriebe und Bauteile Roller chain - Quadruple strand (inch series)

Roller chain - Single strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Single strand

Roller chain - Single strand

Cadenas y componentes Roller chain - Single strand

Kettengetriebe und Bauteile Roller chain - Single strand

Roller chain - Single strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Single strand (inch series)

Roller chain - Single strand (inch series)

Cadenas y componentes Roller chain - Single strand (inch series)

Kettengetriebe und Bauteile Roller chain - Single strand (inch series)

Roller chain - Triple strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Triple strand

Roller chain - Triple strand

Cadenas y componentes Roller chain - Triple strand

Kettengetriebe und Bauteile Roller chain - Triple strand

Roller chain - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Roller chain - Triple strand (inch series)

Roller chain - Triple strand (inch series)

Cadenas y componentes Roller chain - Triple strand (inch series)

Kettengetriebe und Bauteile Roller chain - Triple strand (inch series)

Copyright @2009 - TraceParts is a registered trademark of TraceParts S.A.All other product or company names may be registered trademarks of their respective owners - http://www.traceparts.com



Page 2 / 518

Sprockets - Double strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Double strand

Sprockets - Double strand

Cadenas y componentes Sprockets - Double strand

Kettengetriebe und Bauteile Sprockets - Double strand

Sprockets - Double strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Double strand (inch series)

Sprockets - Double strand (inch series)

Cadenas y componentes Sprockets - Double strand (inch series)

Kettengetriebe und Bauteile Sprockets - Double strand (inch series)

Sprockets - Quadruple strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Quadruple strand

Sprockets - Quadruple strand

Cadenas y componentes Sprockets - Quadruple strand

Kettengetriebe und Bauteile Sprockets - Quadruple strand

Sprockets - Quadruple strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Quadruple strand (inch series)

Sprockets - Quadruple strand (inch series)

Cadenas y componentes Sprockets - Quadruple strand (inch series)

Kettengetriebe und Bauteile Sprockets - Quadruple strand (inch series)

Sprockets - Single strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Single strand

Sprockets - Single strand

Cadenas y componentes Sprockets - Single strand

Kettengetriebe und Bauteile Sprockets - Single strand

Sprockets - Single strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Single strand (inch series)

Sprockets - Single strand (inch series)

Cadenas y componentes Sprockets - Single strand (inch series)

Kettengetriebe und Bauteile Sprockets - Single strand (inch series)

Sprockets - Triple strandASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Triple strand

Sprockets - Triple strand

Cadenas y componentes Sprockets - Triple strand

Kettengetriebe und Bauteile Sprockets - Triple strand

Sprockets - Triple strand (inch series)ASME B29.100-2002 Chain drives and their components


Catene e componenti

Sprockets - Triple strand (inch series)

Sprockets - Triple strand (inch series)

Cadenas y componentes Sprockets - Triple strand (inch series)

Kettengetriebe und Bauteile Sprockets - Triple strand (inch series)




Page 3 / 518

Spring cottersDIN 11024 Rings, bushes, sleeves, collars

Anneaux, douilles, manchons, colliers

Anelli, rasamenti, manicotti, collari

Spring cotters

Spring cotters

Anillos, casquillos, guardapolvos y collarines

Spring cotters

Ringe, Buchsen, Muffen, Schellen

Spring cotters

Spring cottersDIN 11024 Compression springs

Ressorts de compression

Molla a compressione

Spring cotters

Spring cotters

Resortes de compresin Spring cotters

Druckfedern Spring cotters

Round plain head nails for use in automatic nailling machinesDIN 1143 Pins, nails

Goupilles, clous

Perni, chiodi

Round plain head nails for use in automatic nailling machines

Round plain head nails for use in automatic nailling machines

Pasadores, fiadores Round plain head nails for use in automatic nailling machines

Stifte, Ngel Round plain head nails for use in automatic nailling machines

Decorator's tacksDIN 1157 Pins, nails

Goupilles, clous

Perni, chiodi

Decorator's tacks

Decorator's tacks

Pasadores, fiadores Decorator's tacks

Stifte, Ngel Decorator's tacks

Wall hooksDIN 1158 Pins, nails

Goupilles, clous

Perni, chiodi

Wall hooks

Wall hooks

Pasadores, fiadores Wall hooks

Stifte, Ngel Wall hooks

Moulding nailsDIN 1163 Pins, nails

Goupilles, clous

Perni, chiodi

Moulding nails

Moulding nails

Pasadores, fiadores Moulding nails

Stifte, Ngel Moulding nails

Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

DIN 124 Rivets

Rivets

Rivetti



Remaches Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

Nieten Steel round head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

DIN 124 Rivets

Rivets

Rivetti



Remaches Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

Nieten Steel round head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk




Page 4 / 518

Curved spring lock washersDIN 128 Washers

Rondelles

Rosette

Curved spring lock washers

Curved spring lock washers

Arandelas Curved spring lock washers

Unterlegscheiben Curved spring lock washers

Wave spring washersDIN 137 Washers

Rondelles

Rosette

Wave spring washers

Wave spring washers

Arandelas Wave spring washers

Unterlegscheiben Wave spring washers

Washers type coarse for boltsDIN 1441 Washers

Rondelles

Rosette

Washers type coarse for bolts

Washers type coarse for bolts

Arandelas Washers type coarse for bolts

Unterlegscheiben Washers type coarse for bolts

Clevis pins with head and stud endDIN 1445 Pins, nails

Goupilles, clous

Perni, chiodi

Clevis pins with head and stud end

Clevis pins with head and stud end

Pasadores, fiadores Clevis pins with head and stud end

Stifte, Ngel Clevis pins with head and stud end

Grooved pins, half length grooved with gorge - Type A with slot for retaining rings

DIN 1469 Pins, nails

Goupilles, clous

Perni, chiodi



Pasadores, fiadores Grooved pins, half length grooved with gorge - Type A with slot for retaining rings

Stifte, Ngel Grooved pins, half length grooved with gorge - Type A with slot for retaining rings

Grooved pins, half length grooved with gorge - Type B with slot for retaining washers

DIN 1469 Pins, nails

Goupilles, clous

Perni, chiodi



Pasadores, fiadores Grooved pins, half length grooved with gorge - Type B with slot for retaining washers

Stifte, Ngel Grooved pins, half length grooved with gorge - Type B with slot for retaining washers

Grooved pins, half length grooved with gorge - Type C with rounded slotDIN 1469 Pins, nails

Goupilles, clous

Perni, chiodi

Grooved pins, half length grooved with gorge - Type C with rounded slot

Grooved pins, half length grooved with gorge - Type C with rounded slot

Pasadores, fiadores Grooved pins, half length grooved with gorge - Type C with rounded slot

Stifte, Ngel Grooved pins, half length grooved with gorge - Type C with rounded slot

Turnbuckle nuts made from hexagon barDIN 1479 Nuts

Ecrous

Dadi

Turnbuckle nuts made from hexagon bar

Turnbuckle nuts made from hexagon bar

Tuercas Turnbuckle nuts made from hexagon bar

Muttern Turnbuckle nuts made from hexagon bar

Turnbuckles made from steel tube or round steel barDIN 1480 Nuts

Ecrous

Dadi

Turnbuckles made from steel tube or round steel bar

Turnbuckles made from steel tube or round steel bar

Tuercas Turnbuckles made from steel tube or round steel bar

Muttern Turnbuckles made from steel tube or round steel bar




Page 5 / 518

Accessories for the installation of gypsum plasterboardDIN 18182 Pins, nails

Goupilles, clous

Perni, chiodi

Accessories for the installation of gypsum plasterboard

Accessories for the installation of gypsum plasterboard

Pasadores, fiadores Accessories for the installation of gypsum plasterboard

Stifte, Ngel Accessories for the installation of gypsum plasterboard

Triangular nuts for use with electrical equipment in miningDIN 22 425 Nuts

Ecrous

Dadi

Triangular nuts for use with electrical equipment in mining

Triangular nuts for use with electrical equipment in mining

Tuercas Triangular nuts for use with electrical equipment in mining

Muttern Triangular nuts for use with electrical equipment in mining

Double end studsDIN 2509 Bolts, screws, studs

Boulons, vis, goujons

Bulloni, viti, tiranti

Double end studs

Double end studs

Pasadores, tornillos, bridas Double end studs

Stiftbolzen, Schrauben, Bolzen

Double end studs

Hexagon nuts for use with bolts with waisted shank - Type NF regular patternDIN 2510-5 Nuts

Ecrous

Dadi

Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern

Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern

Tuercas Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern

Muttern Hexagon nuts for use with bolts with waisted shank - Type NF regular pattern

Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring

DIN 2510-5 Nuts

Ecrous

Dadi



Tuercas Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring

Muttern Hexagon nuts for use with bolts with waisted shank - Type TF for internal centring

Cap nuts for use with bolts with waisted shank - Type AF regular patternDIN 2510-6 Nuts

Ecrous

Dadi

Cap nuts for use with bolts with waisted shank - Type AF regular pattern

Cap nuts for use with bolts with waisted shank - Type AF regular pattern

Tuercas Cap nuts for use with bolts with waisted shank - Type AF regular pattern

Muttern Cap nuts for use with bolts with waisted shank - Type AF regular pattern

Cap nuts for use with bolts with waisted shank - Type BF for internal centringDIN 2510-6 Nuts

Ecrous

Dadi

Cap nuts for use with bolts with waisted shank - Type BF for internal centring

Cap nuts for use with bolts with waisted shank - Type BF for internal centring

Tuercas Cap nuts for use with bolts with waisted shank - Type BF for internal centring

Muttern Cap nuts for use with bolts with waisted shank - Type BF for internal centring

Sleeves for use with bolts with waisted shank - Type D for centring by the nutDIN 2510-7 Spacers

Entretoises

Distanziatori

Sleeves for use with bolts with waisted shank - Type D for centring by the nut

Sleeves for use with bolts with waisted shank - Type D for centring by the nut

Separadores Sleeves for use with bolts with waisted shank - Type D for centring by the nut

Distanzstcke Sleeves for use with bolts with waisted shank - Type D for centring by the nut

Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread

DIN 2510-7 Spacers

Entretoises

Distanziatori



Separadores Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread

Distanzstcke Sleeves for use with bolts with waisted shank - Type E for centring by the outside diameter of the thread




Page 6 / 518

Taper pins with thread ends and constant taper lengthsDIN 258 Pins, nails

Goupilles, clous

Perni, chiodi

Taper pins with thread ends and constant taper lengths

Taper pins with thread ends and constant taper lengths

Pasadores, fiadores Taper pins with thread ends and constant taper lengths

Stifte, Ngel Taper pins with thread ends and constant taper lengths

Tangential keys and tangential keyways for alternating shock loadsDIN 268 Keys and keyways, splines

Clavetages et cannelures

Chiavette, Linguette e profili scanalati

Tangential keys and tangential keyways for alternating shock loads

Tangential keys and tangential keyways for alternating shock loads

Chavetas y chaveteros Tangential keys and tangential keyways for alternating shock loads

Keile und Kerbungen Tangential keys and tangential keyways for alternating shock loads

Tangential keys and tangential keyways for constant loadsDIN 271 Keys and keyways, splines



Tangential keys and tangential keyways for constant loads

Tangential keys and tangential keyways for constant loads

Chavetas y chaveteros Tangential keys and tangential keyways for constant loads

Keile und Kerbungen Tangential keys and tangential keyways for constant loads

Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

DIN 302 Rivets

Rivets

Rivetti



Remaches Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

Nieten Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type A, upset head rounded

Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

DIN 302 Rivets

Rivets

Rivetti



Remaches Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

Nieten Steel countersunk head rivets with nominal diameters from 10 to 36 mm - Type B, upset head countersunk

Wing screwsDIN 316 Bolts, screws, studs



Wing screws

Wing screws

Pasadores, tornillos, bridas Wing screws


Wing screws

Pipe nutsDIN 431 Nuts

Ecrous

Dadi

Pipe nuts

Pipe nuts

Tuercas Pipe nuts

Muttern Pipe nuts

External tab washersDIN 432 Washers

Rondelles

Rosette

External tab washers

External tab washers

Arandelas External tab washers

Unterlegscheiben External tab washers

Product grade A washers, Part 1DIN 433 Washers

Rondelles

Rosette

Product grade A washers, Part 1


Arandelas Product grade A washers, Part 1

Unterlegscheiben Product grade A washers, Part 1




Page 7 / 518

Product grade A washers, Part 2DIN 433 Washers

Rondelles

Rosette



Arandelas Product grade A washers, Part 2

Unterlegscheiben Product grade A washers, Part 2

EyeboltsDIN 444 Bolts, screws, studs



Eyebolts

Eyebolts

Pasadores, tornillos, bridas Eyebolts


Eyebolts

Tab washers with long and short tab at right anglesDIN 463 Washers

Rondelles

Rosette

Tab washers with long and short tab at right angles

Tab washers with long and short tab at right angles

Arandelas Tab washers with long and short tab at right angles

Unterlegscheiben Tab washers with long and short tab at right angles

Knurled thumb screwsDIN 464 Bolts, screws, studs



Knurled thumb screws


Pasadores, tornillos, bridas Knurled thumb screws



Knurled nuts with collarDIN 466 Nuts

Ecrous

Dadi

Knurled nuts with collar

Knurled nuts with collar

Tuercas Knurled nuts with collar

Muttern Knurled nuts with collar

Weld studsDIN 525 Bolts, screws, studs



Weld studs

Weld studs

Pasadores, tornillos, bridas Weld studs


Weld studs

Safety cups for cheese head screws according to DIN 84DIN 526 Washers

Rondelles

Rosette

Safety cups for cheese head screws according to DIN 84

Safety cups for cheese head screws according to DIN 84

Arandelas Safety cups for cheese head screws according to DIN 84

Unterlegscheiben Safety cups for cheese head screws according to DIN 84

Masonry and foundation bolts - Type ADIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type A


Pasadores, tornillos, bridas Masonry and foundation bolts - Type A



Masonry and foundation bolts - Type BDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type B


Pasadores, tornillos, bridas Masonry and foundation bolts - Type B






Page 8 / 518

Masonry and foundation bolts - Type CDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type C


Pasadores, tornillos, bridas Masonry and foundation bolts - Type C



Masonry and foundation bolts - Type DDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type D


Pasadores, tornillos, bridas Masonry and foundation bolts - Type D



Masonry and foundation bolts - Type EDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type E


Pasadores, tornillos, bridas Masonry and foundation bolts - Type E



Masonry and foundation bolts - Type FDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type F


Pasadores, tornillos, bridas Masonry and foundation bolts - Type F



Masonry and foundation bolts - Type GDIN 529 Bolts, screws, studs



Masonry and foundation bolts - Type G


Pasadores, tornillos, bridas Masonry and foundation bolts - Type G



Slotted round nutsDIN 546 Nuts

Ecrous

Dadi

Slotted round nuts

Slotted round nuts

Tuercas Slotted round nuts

Muttern Slotted round nuts

Round nuts with drilled holes in one faceDIN 547 Nuts

Ecrous

Dadi

Round nuts with drilled holes in one face

Round nuts with drilled holes in one face

Tuercas Round nuts with drilled holes in one face

Muttern Round nuts with drilled holes in one face

Round nuts with set pin holes in sideDIN 548 Nuts

Ecrous

Dadi

Round nuts with set pin holes in side

Round nuts with set pin holes in side

Tuercas Round nuts with set pin holes in side

Muttern Round nuts with set pin holes in side

Hexagon head wood screwsDIN 571 Bolts, screws, studs



Hexagon head wood screws


Pasadores, tornillos, bridas Hexagon head wood screws






Page 9 / 518

Grub screws with thrust pointDIN 6332 Bolts, screws, studs



Grub screws with thrust point


Pasadores, tornillos, bridas Grub screws with thrust point



Clip BoltsDIN 6378 Bolts, screws, studs



Clip Bolts

Clip Bolts

Pasadores, tornillos, bridas Clip Bolts


Clip Bolts

Rivet setsDIN 6434 Rivets

Rivets

Rivetti

Rivet sets

Rivet sets

Remaches Rivet sets

Nieten Rivet sets

Knurled thin thumb screwsDIN 653 Bolts, screws, studs



Knurled thin thumb screws


Pasadores, tornillos, bridas Knurled thin thumb screws



Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

DIN 660 Rivets

Rivets

Rivetti



Remaches Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

Nieten Round head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

DIN 660 Rivets

Rivets

Rivetti



Remaches Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

Nieten Round head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

DIN 661 Rivets

Rivets

Rivetti



Remaches Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

Nieten Countersunk head rivets with nominal diameters from 1 to 8 mm - Type A, upset head rounded

Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

DIN 661 Rivets

Rivets

Rivetti



Remaches Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk

Nieten Countersunk head rivets with nominal diameters from 1 to 8 mm - Type B, upset head countersunk




Page 10 / 518

Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

DIN 662 Rivets

Rivets

Rivetti



Remaches Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

Nieten Over-head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

DIN 662 Rivets

Rivets

Rivetti



Remaches Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

Nieten Over-head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

DIN 674 Rivets

Rivets

Rivetti



Remaches Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

Nieten Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type A, upset head rounded

Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

DIN 674 Rivets

Rivets

Rivetti



Remaches Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

Nieten Mushroom head rivets with nominal diameters from 1.6 to 6 mm - Type B, upset head countersunk

Flat countersunk head rivets with nominal diameters from 3 to 5 mmDIN 675 Rivets

Rivets

Rivetti

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

Remaches Flat countersunk head rivets with nominal diameters from 3 to 5 mm

Nieten Flat countersunk head rivets with nominal diameters from 3 to 5 mm

Semitubular pan head rivets with nominal diameters from 1.6 to 10 mmDIN 6791 Rivets

Rivets

Rivetti

Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm

Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm

Remaches Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm

Nieten Semitubular pan head rivets with nominal diameters from 1.6 to 10 mm

Conical spring washers for bolt/nut assembliesDIN 6796 Washers

Rondelles

Rosette

Conical spring washers for bolt/nut assemblies

Conical spring washers for bolt/nut assemblies

Arandelas Conical spring washers for bolt/nut assemblies

Unterlegscheiben Conical spring washers for bolt/nut assemblies

Toothed lock washers - Type A, with external teethDIN 6797 Washers

Rondelles

Rosette

Toothed lock washers - Type A, with external teeth

Toothed lock washers - Type A, with external teeth

Arandelas Toothed lock washers - Type A, with external teeth

Unterlegscheiben Toothed lock washers - Type A, with external teeth




Page 11 / 518

Toothed lock washers - Type J, with internal teethDIN 6797 Washers

Rondelles

Rosette

Toothed lock washers - Type J, with internal teeth

Toothed lock washers - Type J, with internal teeth

Arandelas Toothed lock washers - Type J, with internal teeth

Unterlegscheiben Toothed lock washers - Type J, with internal teeth

Toothed lock washers - Type V, countersunkDIN 6797 Washers

Rondelles

Rosette

Toothed lock washers - Type V, countersunk

Toothed lock washers - Type V, countersunk

Arandelas Toothed lock washers - Type V, countersunk

Unterlegscheiben Toothed lock washers - Type V, countersunk

Serrated lock washers - Type A, with external teethDIN 6798 Washers

Rondelles

Rosette

Serrated lock washers - Type A, with external teeth

Serrated lock washers - Type A, with external teeth

Arandelas Serrated lock washers - Type A, with external teeth

Unterlegscheiben Serrated lock washers - Type A, with external teeth

Serrated lock washers - Type J, with internal teethDIN 6798 Washers

Rondelles

Rosette

Serrated lock washers - Type J, with internal teeth

Serrated lock washers - Type J, with internal teeth

Arandelas Serrated lock washers - Type J, with internal teeth

Unterlegscheiben Serrated lock washers - Type J, with internal teeth

Serrated lock washers - Type V, countersunkDIN 6798 Washers

Rondelles

Rosette

Serrated lock washers - Type V, countersunk

Serrated lock washers - Type V, countersunk

Arandelas Serrated lock washers - Type V, countersunk

Unterlegscheiben Serrated lock washers - Type V, countersunk

Nails for assembling timber pallets - Type A, helical threaded shank flat head nail

DIN 68 163 Pins, nails

Goupilles, clous

Perni, chiodi



Pasadores, fiadores Nails for assembling timber pallets - Type A, helical threaded shank flat head nail

Stifte, Ngel Nails for assembling timber pallets - Type A, helical threaded shank flat head nail

Nails for assembling timber pallets - Type K, annular ringed shank flat head nailDIN 68 163 Pins, nails

Goupilles, clous

Perni, chiodi

Nails for assembling timber pallets - Type K, annular ringed shank flat head nail

Nails for assembling timber pallets - Type K, annular ringed shank flat head nail

Pasadores, fiadores Nails for assembling timber pallets - Type K, annular ringed shank flat head nail

Stifte, Ngel Nails for assembling timber pallets - Type K, annular ringed shank flat head nail

Gib-head saddle keysDIN 6881 Keys and keyways, splines



Gib-head saddle keys

Gib-head saddle keys

Chavetas y chaveteros Gib-head saddle keys

Keile und Kerbungen Gib-head saddle keys

Saddle keysDIN 6881 Keys and keyways, splines



Saddle keys

Saddle keys

Chavetas y chaveteros Saddle keys

Keile und Kerbungen Saddle keys




Page 12 / 518

Parallel keysDIN 6883 Keys and keyways, splines



Parallel keys

Parallel keys

Chavetas y chaveteros Parallel keys

Keile und Kerbungen Parallel keys

Gib-head parallel keysDIN 6884 Keys and keyways, splines



Gib-head parallel keys

Gib-head parallel keys

Chavetas y chaveteros Gib-head parallel keys

Keile und Kerbungen Gib-head parallel keys

Parallel Keys - Type A, round-endedDIN 6885 Keys and keyways, splines



Parallel Keys - Type A, round-ended

Parallel Keys - Type A, round-ended

Chavetas y chaveteros Parallel Keys - Type A, round-ended

Keile und Kerbungen Parallel Keys - Type A, round-ended

Parallel Keys - Type A, round-ended - Part 2DIN 6885 Keys and keyways, splines



Parallel Keys - Type A, round-ended - Part 2

Parallel Keys - Type A, round-ended - Part 2

Chavetas y chaveteros Parallel Keys - Type A, round-ended - Part 2

Keile und Kerbungen Parallel Keys - Type A, round-ended - Part 2

Parallel Keys - Type A, round-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines



Parallel Keys - Type A, round-ended without retaining screw - Part 3

Parallel Keys - Type A, round-ended without retaining screw - Part 3

Chavetas y chaveteros Parallel Keys - Type A, round-ended without retaining screw - Part 3

Keile und Kerbungen Parallel Keys - Type A, round-ended without retaining screw - Part 3

Parallel Keys - Type B, square-endedDIN 6885 Keys and keyways, splines



Parallel Keys - Type B, square-ended

Parallel Keys - Type B, square-ended

Chavetas y chaveteros Parallel Keys - Type B, square-ended

Keile und Kerbungen Parallel Keys - Type B, square-ended

Parallel Keys - Type B, square-ended without retaining screw - Part 3DIN 6885 Keys and keyways, splines



Parallel Keys - Type B, square-ended without retaining screw - Part 3

Parallel Keys - Type B, square-ended without retaining screw - Part 3

Chavetas y chaveteros Parallel Keys - Type B, square-ended without retaining screw - Part 3

Keile und Kerbungen Parallel Keys - Type B, square-ended without retaining screw - Part 3

Parallel Keys - Type C, round-endedDIN 6885 Keys and keyways, splines



Parallel Keys - Type C, round-ended

Parallel Keys - Type C, round-ended

Chavetas y chaveteros Parallel Keys - Type C, round-ended

Keile und Kerbungen Parallel Keys - Type C, round-ended

Parallel Keys - Type C, round-ended - Part 2DIN 6885 Keys and keyways, splines



Parallel Keys - Type C, round-ended - Part 2

Parallel Keys - Type C, round-ended - Part 2

Chavetas y chaveteros Parallel Keys - Type C, round-ended - Part 2

Keile und Kerbungen Parallel Keys - Type C, round-ended - Part 2




Page 13 / 518

Parallel Keys - Type C, round-ended for retaining screw - Part 3DIN 6885 Keys and keyways, splines



Parallel Keys - Type C, round-ended for retaining screw - Part 3

Parallel Keys - Type C, round-ended for retaining screw - Part 3

Chavetas y chaveteros Parallel Keys - Type C, round-ended for retaining screw - Part 3

Keile und Kerbungen Parallel Keys - Type C, round-ended for retaining screw - Part 3

Parallel Keys - Type D, square-endedDIN 6885 Keys and keyways, splines



Parallel Keys - Type D, square-ended

Parallel Keys - Type D, square-ended

Chavetas y chaveteros Parallel Keys - Type D, square-ended

Keile und Kerbungen Parallel Keys - Type D, square-ended

Parallel Keys - Type E, round-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines



Parallel Keys - Type E, round-ended with holes for 2 retaining screws

Parallel Keys - Type E, round-ended with holes for 2 retaining screws

Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws

Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws

Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2DIN 6885 Keys and keyways, splines



Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2


Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2

Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 2

Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3DIN 6885 Keys and keyways, splines





Chavetas y chaveteros Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3

Keile und Kerbungen Parallel Keys - Type E, round-ended with holes for 2 retaining screws - Part 3

Parallel Keys - Type F, square-ended with holes for 2 retaining screwsDIN 6885 Keys and keyways, splines



Parallel Keys - Type F, square-ended with holes for 2 retaining screws

Parallel Keys - Type F, square-ended with holes for 2 retaining screws

Chavetas y chaveteros Parallel Keys - Type F, square-ended with holes for 2 retaining screws

Keile und Kerbungen Parallel Keys - Type F, square-ended with holes for 2 retaining screws

Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw

DIN 6885 Keys and keyways, splines





Chavetas y chaveteros Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw

Keile und Kerbungen Parallel Keys - Type G, square-ended with chamfer and hole for 1 retaining screw

Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws






Chavetas y chaveteros Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws

Keile und Kerbungen Parallel Keys - Type H, square-ended with chamfer and holes for 2 retaining screws




Page 14 / 518

Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve






Chavetas y chaveteros Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve

Keile und Kerbungen Parallel Keys - Type J, square-ended with chamfer and hole for 1 spring dewel sleeve

Taper Keys - Type A, rounded-endedDIN 6886 Keys and keyways, splines



Taper Keys - Type A, rounded-ended

Taper Keys - Type A, rounded-ended

Chavetas y chaveteros Taper Keys - Type A, rounded-ended

Keile und Kerbungen Taper Keys - Type A, rounded-ended

Taper Keys - Type B, square-endedDIN 6886 Keys and keyways, splines



Taper Keys - Type B, square-ended

Taper Keys - Type B, square-ended

Chavetas y chaveteros Taper Keys - Type B, square-ended

Keile und Kerbungen Taper Keys - Type B, square-ended

Taper Key with gib-headDIN 6887 Keys and keyways, splines



Taper Key with gib-head

Taper Key with gib-head

Chavetas y chaveteros Taper Key with gib-head

Keile und Kerbungen Taper Key with gib-head

Woodruff keys - Allocation IDIN 6888 Keys and keyways, splines



Woodruff keys - Allocation I

Woodruff keys - Allocation I

Chavetas y chaveteros Woodruff keys - Allocation I

Keile und Kerbungen Woodruff keys - Allocation I

Woodruff keys - Allocation IIDIN 6888 Keys and keyways, splines



Woodruff keys - Allocation II

Woodruff keys - Allocation II

Chavetas y chaveteros Woodruff keys - Allocation II

Keile und Kerbungen Woodruff keys - Allocation II

Curved spring washersDIN 6904 Washers

Rondelles

Rosette

Curved spring washers

Curved spring washers

Arandelas Curved spring washers

Unterlegscheiben Curved spring washers

Spring lock washersDIN 6905 Washers

Rondelles

Rosette

Spring lock washers

Spring lock washers

Arandelas Spring lock washers

Unterlegscheiben Spring lock washers

Serrated lock washers with external teethDIN 6907 Washers

Rondelles

Rosette

Serrated lock washers with external teeth

Serrated lock washers with external teeth

Arandelas Serrated lock washers with external teeth

Unterlegscheiben Serrated lock washers with external teeth




Page 15 / 518

Conical spring washers for screw and washer assembliesDIN 6908 Washers

Rondelles

Rosette

Conical spring washers for screw and washer assemblies

Conical spring washers for screw and washer assemblies

Arandelas Conical spring washers for screw and washer assemblies

Unterlegscheiben Conical spring washers for screw and washer assemblies

Hexagon socket thin head cap screwsDIN 6912 Bolts, screws, studs



Hexagon socket thin head cap screws


Pasadores, tornillos, bridas Hexagon socket thin head cap screws



High-strength hexagon head boltsDIN 6914 Bolts, screws, studs



High-strength hexagon head bolts


Pasadores, tornillos, bridas High-strength hexagon head bolts



Hexagon flange bolts DIN 6921DIN 6921 Bolts, screws, studs



Hexagon flange bolts DIN 6921


Pasadores, tornillos, bridas Hexagon flange bolts DIN 6921



Hexagon flange bolts DIN 6922DIN 6922 Bolts, screws, studs





Pasadores, tornillos, bridas Hexagon flange bolts DIN 6922



Hexagon washer head tapping screwsDIN 6928 Bolts, screws, studs



Hexagon washer head tapping screws


Pasadores, tornillos, bridas Hexagon washer head tapping screws



Compression rivets - Type A, with flat headDIN 7331 Rivets

Rivets

Rivetti

Compression rivets - Type A, with flat head

Compression rivets - Type A, with flat head

Remaches Compression rivets - Type A, with flat head

Nieten Compression rivets - Type A, with flat head

Compression rivets - Type B, with truss headDIN 7331 Rivets

Rivets

Rivetti

Compression rivets - Type B, with truss head

Compression rivets - Type B, with truss head

Remaches Compression rivets - Type B, with truss head

Nieten Compression rivets - Type B, with truss head

Brake and clutch lining rivets - Type A, solid rivetDIN 7338 Rivets

Rivets

Rivetti

Brake and clutch lining rivets - Type A, solid rivet

Brake and clutch lining rivets - Type A, solid rivet

Remaches Brake and clutch lining rivets - Type A, solid rivet

Nieten Brake and clutch lining rivets - Type A, solid rivet

Brake and clutch lining rivets - Type B, semitubular rivetDIN 7338 Rivets

Rivets

Rivetti

Brake and clutch lining rivets - Type B, semitubular rivet

Brake and clutch lining rivets - Type B, semitubular rivet

Remaches Brake and clutch lining rivets - Type B, semitubular rivet

Nieten Brake and clutch lining rivets - Type B, semitubular rivet




Page 16 / 518

Brake and clutch lining rivets - Type C, tubular rivet drawn from stripDIN 7338 Rivets

Rivets

Rivetti

Brake and clutch lining rivets - Type C, tubular rivet drawn from strip

Brake and clutch lining rivets - Type C, tubular rivet drawn from strip

Remaches Brake and clutch lining rivets - Type C, tubular rivet drawn from strip

Nieten Brake and clutch lining rivets - Type C, tubular rivet drawn from strip

Brake and clutch lining rivets - Type C, tubular rivet made from wireDIN 7338 Rivets

Rivets

Rivetti

Brake and clutch lining rivets - Type C, tubular rivet made from wire

Brake and clutch lining rivets - Type C, tubular rivet made from wire

Remaches Brake and clutch lining rivets - Type C, tubular rivet made from wire

Nieten Brake and clutch lining rivets - Type C, tubular rivet made from wire

One-piece tubular rivets drawn from stripDIN 7339 Rivets

Rivets

Rivetti

One-piece tubular rivets drawn from strip

One-piece tubular rivets drawn from strip

Remaches One-piece tubular rivets drawn from strip

Nieten One-piece tubular rivets drawn from strip

Tubular rivets made from tube - Type A, with pan headDIN 7340 Rivets

Rivets

Rivetti

Tubular rivets made from tube - Type A, with pan head

Tubular rivets made from tube - Type A, with pan head

Remaches Tubular rivets made from tube - Type A, with pan head

Nieten Tubular rivets made from tube - Type A, with pan head

Tubular rivets made from tube - Type B, with rolled back round headDIN 7340 Rivets

Rivets

Rivetti

Tubular rivets made from tube - Type B, with rolled back round head

Tubular rivets made from tube - Type B, with rolled back round head

Remaches Tubular rivets made from tube - Type B, with rolled back round head

Nieten Tubular rivets made from tube - Type B, with rolled back round head

Rivet pins - Type ADIN 7341 Rivets

Rivets

Rivetti

Rivet pins - Type A

Rivet pins - Type A

Remaches Rivet pins - Type A

Nieten Rivet pins - Type A

Rivet pins - Type BDIN 7341 Rivets

Rivets

Rivetti

Rivet pins - Type B

Rivet pins - Type B

Remaches Rivet pins - Type B

Nieten Rivet pins - Type B

Plain washers for bolts with heavy clamping sleevesDIN 7349 Washers

Rondelles

Rosette

Plain washers for bolts with heavy clamping sleeves

Plain washers for bolts with heavy clamping sleeves

Arandelas Plain washers for bolts with heavy clamping sleeves

Unterlegscheiben Plain washers for bolts with heavy clamping sleeves

Light-duty hexagon head screw plugsDIN 7604 Bolts, screws, studs



Light-duty hexagon head screw plugs


Pasadores, tornillos, bridas Light-duty hexagon head screw plugs



Cross recessed raised countersunk head wood screws - Type HDIN 7665 Bolts, screws, studs



Cross recessed raised countersunk head wood screws - Type H


Pasadores, tornillos, bridas Cross recessed raised countersunk head wood screws - Type H






Page 17 / 518

Cross recessed raised countersunk head wood screws - Type ZDIN 7665 Bolts, screws, studs



Cross recessed raised countersunk head wood screws - Type Z


Pasadores, tornillos, bridas Cross recessed raised countersunk head wood screws - Type Z



Reduced shank bolts and screws with coarse thread - Head style ADIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style A


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style A



Reduced shank bolts and screws with coarse thread - Head style BDIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style B


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style B



Reduced shank bolts and screws with coarse thread - Head style C - Type HDIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style C - Type H


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style C - Type H



Reduced shank bolts and screws with coarse thread - Head style C - Type ZDIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style C - Type Z


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style C - Type Z



Reduced shank bolts and screws with coarse thread - Head style D2DIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style D2


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style D2



Reduced shank bolts and screws with coarse thread - Head style EDIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style E


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style E



Reduced shank bolts and screws with coarse thread - Head style FDIN 7964 Bolts, screws, studs



Reduced shank bolts and screws with coarse thread - Head style F


Pasadores, tornillos, bridas Reduced shank bolts and screws with coarse thread - Head style F



Self locking counter nutsDIN 7967 Nuts

Ecrous

Dadi

Self locking counter nuts

Self locking counter nuts

Tuercas Self locking counter nuts

Muttern Self locking counter nuts




Page 18 / 518

Hexagon fit bolts for structural steel boltingDIN 7968 Bolts, screws, studs



Hexagon fit bolts for structural steel bolting


Pasadores, tornillos, bridas Hexagon fit bolts for structural steel bolting



Slotted countersunk head screws for structural steel bolting for supply with nutDIN 7969 Bolts, screws, studs



Slotted countersunk head screws for structural steel bolting for supply with nut


Pasadores, tornillos, bridas Slotted countersunk head screws for structural steel bolting for supply with nut



Slotted countersunk head screws for structural steel bolting for supply without nut

DIN 7969 Bolts, screws, studs





Pasadores, tornillos, bridas Slotted countersunk head screws for structural steel bolting for supply without nut



Special foundation boltsDIN 797 Bolts, screws, studs



Special foundation bolts


Pasadores, tornillos, bridas Special foundation bolts



Hexagon head bolts for structural steel bolting for supply with nutDIN 7990 Bolts, screws, studs



Hexagon head bolts for structural steel bolting for supply with nut


Pasadores, tornillos, bridas Hexagon head bolts for structural steel bolting for supply with nut



T-Head Bolts with Large HeadDIN 7992 Bolts, screws, studs



T-Head Bolts with Large Head


Pasadores, tornillos, bridas T-Head Bolts with Large Head



Round wire snap rings and snap ring grooves for shafts and bores - Type ADIN 7993 Rings, bushes, sleeves, collars



Round wire snap rings and snap ring grooves for shafts and bores - Type A






Round wire snap rings and snap ring grooves for shafts and bores - Type BDIN 7993 Rings, bushes, sleeves, collars



Round wire snap rings and snap ring grooves for shafts and bores - Type B









Page 19 / 518

Cross recessed pan head wood screws - Type HDIN 7996 Bolts, screws, studs



Cross recessed pan head wood screws - Type H


Pasadores, tornillos, bridas Cross recessed pan head wood screws - Type H



Cross recessed pan head wood screws - Type ZDIN 7996 Bolts, screws, studs



Cross recessed pan head wood screws - Type Z


Pasadores, tornillos, bridas Cross recessed pan head wood screws - Type Z



Cross recessed countersunk head wood screws - Type HDIN 7997 Bolts, screws, studs



Cross recessed countersunk head wood screws - Type H


Pasadores, tornillos, bridas Cross recessed countersunk head wood screws - Type H



Cross recessed countersunk head wood screws - Type ZDIN 7997 Bolts, screws, studs



Cross recessed countersunk head wood screws - Type Z


Pasadores, tornillos, bridas Cross recessed countersunk head wood screws - Type Z



High-strength hexagon fit boltsDIN 7999 Bolts, screws, studs



High-strength hexagon fit bolts


Pasadores, tornillos, bridas High-strength hexagon fit bolts



Slotted cheese head screws for fine mechanics - Type ADIN 8243 Bolts, screws, studs



Slotted cheese head screws for fine mechanics - Type A


Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type A



Slotted cheese head screws for fine mechanics - Type BDIN 8243 Bolts, screws, studs



Slotted cheese head screws for fine mechanics - Type B


Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type B



Slotted cheese head screws for fine mechanics - Type CDIN 8243 Bolts, screws, studs



Slotted cheese head screws for fine mechanics - Type C


Pasadores, tornillos, bridas Slotted cheese head screws for fine mechanics - Type C



Slotted countersunk (flat) head screws for fine mechanicsDIN 8245 Bolts, screws, studs



Slotted countersunk (flat) head screws for fine mechanics


Pasadores, tornillos, bridas Slotted countersunk (flat) head screws for fine mechanics






Page 20 / 518

Studs DIN 835DIN 835 Bolts, screws, studs



Studs DIN 835

Studs DIN 835

Pasadores, tornillos, bridas Studs DIN 835


Studs DIN 835

Hexagon socket pipe plugsDIN 906 Bolts, screws, studs



Hexagon socket pipe plugs


Pasadores, tornillos, bridas Hexagon socket pipe plugs



Hexagon socket screw plugsDIN 908 Bolts, screws, studs



Hexagon socket screw plugs


Pasadores, tornillos, bridas Hexagon socket screw plugs



Hexagon head pipe plugsDIN 909 Bolts, screws, studs



Hexagon head pipe plugs


Pasadores, tornillos, bridas Hexagon head pipe plugs



Heavy-duty hexagon head screw plugsDIN 910 Bolts, screws, studs



Heavy-duty hexagon head screw plugs


Pasadores, tornillos, bridas Heavy-duty hexagon head screw plugs



Slotted pan head screws with small headDIN 920 Bolts, screws, studs



Slotted pan head screws with small head


Pasadores, tornillos, bridas Slotted pan head screws with small head



Slotted pan head screws with large headDIN 921 Bolts, screws, studs



Slotted pan head screws with large head


Pasadores, tornillos, bridas Slotted pan head screws with large head



Slotted pan head screws with small head and full dog pointDIN 922 Bolts, screws, studs



Slotted pan head screws with small head and full dog point


Pasadores, tornillos, bridas Slotted pan head screws with small head and full dog point



Slotted pan head screws with shoulderDIN 923 Bolts, screws, studs



Slotted pan head screws with shoulder


Pasadores, tornillos, bridas Slotted pan head screws with shoulder






Page 21 / 518

Slotted raised countersunk head screws with full dog pointDIN 924 Bolts, screws, studs



Slotted raised countersunk head screws with full dog point


Pasadores, tornillos, bridas Slotted raised countersunk head screws with full dog point



Slotted countersunk head screws with full dog pointDIN 925 Bolts, screws, studs



Slotted countersunk head screws with full dog point


Pasadores, tornillos, bridas Slotted countersunk head screws with full dog point



Slotted set screws with dog pointDIN 926 Bolts, screws, studs



Slotted set screws with dog point


Pasadores, tornillos, bridas Slotted set screws with dog point



Slotted shoulder screwsDIN 927 Bolts, screws, studs



Slotted shoulder screws


Pasadores, tornillos, bridas Slotted shoulder screws



Square weld nutsDIN 928 Nuts

Ecrous

Dadi

Square weld nuts

Square weld nuts

Tuercas Square weld nuts

Muttern Square weld nuts

Tab washers with long tabDIN 93 Washers

Rondelles

Rosette

Tab washers with long tab

Tab washers with long tab

Arandelas Tab washers with long tab

Unterlegscheiben Tab washers with long tab

M42 to M160 x 6 hexagon head boltsDIN 931-2 Bolts, screws, studs



M42 to M160 x 6 hexagon head bolts


Pasadores, tornillos, bridas M42 to M160 x 6 hexagon head bolts



Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B

DIN 935 Nuts

Ecrous

Dadi



Tuercas Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B

Muttern Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread, Product grades A and B

Hexagon slotted nuts with metric coarse pitch thread, product grades CDIN 935 Nuts

Ecrous

Dadi

Hexagon slotted nuts with metric coarse pitch thread, product grades C

Hexagon slotted nuts with metric coarse pitch thread, product grades C

Tuercas Hexagon slotted nuts with metric coarse pitch thread, product grades C

Muttern Hexagon slotted nuts with metric coarse pitch thread, product grades C




Page 22 / 518




Studs DIN 938

Studs DIN 938



Studs DIN 938




Studs DIN 939

Studs DIN 939



Studs DIN 939




Studs DIN 940

Studs DIN 940



Studs DIN 940

Metric interference-fit thread studs DIN 949-1DIN 949-1 Bolts, screws, studs



Metric interference-fit thread studs DIN 949-1


Pasadores, tornillos, bridas Metric interference-fit thread studs DIN 949-1



Metric interference-fit thread studs DIN 949-2DIN 949-2 Bolts, screws, studs





Pasadores, tornillos, bridas Metric interference-fit thread studs DIN 949-2



Slotted raised countersunk (oval) head wood screwsDIN 95 Bolts, screws, studs



Slotted raised countersunk (oval) head wood screws


Pasadores, tornillos, bridas Slotted raised countersunk (oval) head wood screws



Slotted round head wood screwsDIN 96 Bolts, screws, studs



Slotted round head wood screws


Pasadores, tornillos, bridas Slotted round head wood screws



Product grade A cross recessed pan head screws with collarDIN 967 Bolts, screws, studs



Product grade A cross recessed pan head screws with collar


Pasadores, tornillos, bridas Product grade A cross recessed pan head screws with collar



Cross recessed pan head tapping screws with collar - Type HDIN 968 Bolts, screws, studs



Cross recessed pan head tapping screws with collar - Type H


Pasadores, tornillos, bridas Cross recessed pan head tapping screws with collar - Type H






Page 23 / 518

Cross recessed pan head tapping screws with collar - Type ZDIN 968 Bolts, screws, studs



Cross recessed pan head tapping screws with collar - Type Z


Pasadores, tornillos, bridas Cross recessed pan head tapping screws with collar - Type Z



Slotted countersunk (flat) head wood screwsDIN 97 Bolts, screws, studs



Slotted countersunk (flat) head wood screws


Pasadores, tornillos, bridas Slotted countersunk (flat) head wood screws



Retaining rings with lugs for use on shafts (external circlips)DIN 983 Rings, bushes, sleeves, collars



Retaining rings with lugs for use on shafts (external circlips)






Spring retaining rings with lugs for use in bores (internal circlips)DIN 984 Rings, bushes, sleeves, collars



Spring retaining rings with lugs for use in bores (internal circlips)






Shim ringsDIN 988 Washers

Rondelles

Rosette

Shim rings

Shim rings

Arandelas Shim rings

Unterlegscheiben Shim rings

Supporting ringsDIN 988 Washers

Rondelles

Rosette

Supporting rings

Supporting rings

Arandelas Supporting rings

Unterlegscheiben Supporting rings

Taper pins, unhardened - Type A, ground pinsDIN EN 22 339 Pins, nails

Goupilles, clous

Perni, chiodi

Taper pins, unhardened - Type A, ground pins

Taper pins, unhardened - Type A, ground pins

Pasadores, fiadores Taper pins, unhardened - Type A, ground pins

Stifte, Ngel Taper pins, unhardened - Type A, ground pins

Taper pins, unhardened - Type B, turned pinsDIN EN 22 339 Pins, nails

Goupilles, clous

Perni, chiodi

Taper pins, unhardened - Type B, turned pins

Taper pins, unhardened - Type B, turned pins

Pasadores, fiadores Taper pins, unhardened - Type B, turned pins

Stifte, Ngel Taper pins, unhardened - Type B, turned pins

Clevis pins without head - Type A, Without split pin holesDIN EN 22340 Pins, nails

Goupilles, clous

Perni, chiodi

Clevis pins without head - Type A, Without split pin holes

Clevis pins without head - Type A, Without split pin holes

Pasadores, fiadores Clevis pins without head - Type A, Without split pin holes

Stifte, Ngel Clevis pins without head - Type A, Without split pin holes




Page 24 / 518

Clevis pins without head - Type B, With split pin holesDIN EN 22340 Pins, nails

Goupilles, clous

Perni, chiodi

Clevis pins without head - Type B, With split pin holes

Clevis pins without head - Type B, With split pin holes

Pasadores, fiadores Clevis pins without head - Type B, With split pin holes

Stifte, Ngel Clevis pins without head - Type B, With split pin holes

Clevis pins with head - Type A, Without split pin holesDIN EN 22341 Pins, nails

Goupilles, clous

Perni, chiodi

Clevis pins with head - Type A, Without split pin holes

Clevis pins with head - Type A, Without split pin holes

Pasadores, fiadores Clevis pins with head - Type A, Without split pin holes

Stifte, Ngel Clevis pins with head - Type A, Without split pin holes

Clevis pins with head - Type B, With split pin holesDIN EN 22341 Pins, nails

Goupilles, clous

Perni, chiodi

Clevis pins with head - Type B, With split pin holes

Clevis pins with head - Type B, With split pin holes

Pasadores, fiadores Clevis pins with head - Type B, With split pin holes

Stifte, Ngel Clevis pins with head - Type B, With split pin holes

Hexagon head boltsDIN EN 24014 Bolts, screws, studs



Hexagon head bolts

Hexagon head bolts

Pasadores, tornillos, bridas Hexagon head bolts


Hexagon head bolts

Hexagon head bolts - Reduced shankDIN EN 24015 Bolts, screws, studs



Hexagon head bolts - Reduced shank


Pasadores, tornillos, bridas Hexagon head bolts - Reduced shank



Hexagon head bolts ISO 4016DIN EN 24016 Bolts, screws, studs



Hexagon head bolts ISO 4016


Pasadores, tornillos, bridas Hexagon head bolts ISO 4016



Hexagon head screws ISO 4017DIN EN 24017 Bolts, screws, studs



Hexagon head screws ISO 4017

Hexagon head screws ISO 4017

Pasadores, tornillos, bridas Hexagon head screws ISO 4017


He

dl3.traceparts.comdl3.traceparts.com/dl/traceparts/tpdvd/pdf/NewParts_v261_v259_Web.… ·...

Documents

Transcript of dl3.traceparts.comdl3.traceparts.com/dl/traceparts/tpdvd/pdf/NewParts_v261_v259_Web.… ·...