Stand-By Emergency Lighting Inverter

Single Phase 75 W – 125 W

What is the Eternalight Micro?

It is a single phaseEmergency Lighting Inverter

which is a stand-by unit.It defends your environment against

unwanted power outage andelectrical disturbances. It continually

maintains efficient (over 99%)AC Emergency Power to operateall emergency lighting fixturesat “full-light” output, providing

Superior dependability and security tocommercial/industrial environments

in a small footprint.

It is available in power levels of75, 100 & 125 Watts

Why is the Eternalight Micro better?

With the increased environmental awareness and theincrease in energy costs, what are you to do?

With the Cobra technology you can reduce bothenergy cost and energy consumption.

Cobra’s technology allows a much higherefficiency rating, consuming less power.

Consuming less energy saves your money andthe environment while keeping

the same dependability you expectfrom DSPM.

What makes theEternalight Micro different?

• DSPM Watchdog software always on guard.• Dependable DSP/PWM technology for unsurpassed reliability.• Economical for the lowest overall cost for your light safety, with an Energy Star Rating.• Temperature compensating technology that controls batteries for the longest battery life.• Sealed maintenance free batteries.• Full light output for entire 90 minutes.• Self-diagnostics for a safe and secure lighted environment.• Pure sine wave output for all types of lamps.• ECM module is a patented technology used by DSPM.• Backup solutions for multiple applications such as: indoor and outdoor emergency lighting, exits, cash registers, computers, strategic electronics and more!• 10 Year pro-rated battery warranty• 5 Year power train warranty• Meets federal, state and local codes: UL924, NFPA 101, NFPA 70, NEC and OSHA.

Specifications*Standard Power Levels...........75, 100 and 125 Watts*Input Voltage ..........................120 or 277 VAC*Input Voltage Range...............+10%. -15%*Output Voltage........................120 or 277 VAC*Output Voltage Regulation......±3% for all loads and battery discharge mode*Output Frequency Range........60 Hz, ±1%Output Wave Form...................Sine-wave <5% @ 100% linear loadCrest Factor..............................2.5:1 typicalInput Protection........................Input Main Circuit BreakerOutput Protection.....................Output Main Circuit BreakerSurge Protection......................The unit will protect itself and the load against surges

as defined in ANSI/EEE C62.45 category A and BBattery......................................Sealed maintenance-free (AGM) lead calciumRecharge Current.....................Conforms to UL924 standardsExternal Battery........................Provision for hardware connection of

external battery cabinets or DC sourceEfficiency..................................≥99% at 100% linear loadAudible Noise...........................<45dB measured on Response Curve “A” Safety Agencies.......................Listed to UL standard 924Operating Temperature............0º to 40ºC (32º to 104ºF)Storage Temperature...............-20º to 60ºC (-4º to 140ºF)Humidity...................................5 - 95%, Non-condensingTransfer Time...........................16msec – 60msec

*Consult factory for others. Specifications subject to change without notice.

System Drawing:

Specification Chart:

BrochureFor your convenience you can download the brochure with

all the information about our Eternalight Micro from our website: www.DSPMinc.net

Data SheetFor your convenience you can download the data sheet with

all the information along with how to order ourEternalight Micro from our website: www.DSPMinc.net

Other DownloadsFor your convenience you can also download the

technical specification, manual, field service documents, andwhite papers for the Eternalight Micro from our website:

www.DSPMinc.net

If you have any other questions or would like more information

Call 1.877.DSPM.POWER1.877.377.6769

Thank You!089-0021-01