Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 1 REV B 03/02/2009

SSV40108 & SSV40108 DW

SSV40108 Hoist Alum SS V-Frame6243601 Big Wheel - Lift ShoreStation69426 Hardware Box - SSV40108 Hoist62504 Lower Frame Bundle - V4010862464 Platform Bundle - V401086942801 Winch Bundle - Hoist V20/V4065021 Winch Tube Bundle - V30/V4062927 Leg Bundle - V40108HA0024 Motor Stop Bundle Alum 5” V-FrameHA0053 Bunk Poly V30/V40108 / V30/4012069592 Lit Packet, V40108/DW

SSV40108 DW Hoist Alum SS V-Frame6243601 Big Wheel - Lift ShoreStation69426 Hardware Box - SSV40108 Hoist62504 Lower Frame Bundle - V4010862464 Platform Bundle - V401086942801 Winch Bundle - Hoist V20/V4065021 Winch Tube Bundle - V30/V4067227 Leg Bundle - V40108 DWHA0024 Motor Stop Bundle Alum 5” V-FrameHA0053 Bunk Poly V30/V40108 / V30/4012069592 Lit Packet, V40108/DW

SSV40108 Shown in Drawing

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 2 REV B 03/02/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 3 REV B 03/02/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 4 REV B 03/02/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 5 REV B 03/02/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 6 REV B 03/02/2009

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 7 REV B 03/02/2009

Winch Post Guide Post

Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 8 REV B 03/02/2009

Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 9 REV B 03/02/2009

Winch Tube Assembly WINCH TUBE SERVICE INSTRUCTIONS

The winch tube assembly was pre-assembled at the factory. It is important that the internal parts and cable routings are assembled properly in order for the winch tube assembly to function properly. It also requires special tools during the as-sembly process. It is therefore recommended that you con-tact your local dealer should you ever have issues with the winch tube assembly.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 10 REV B 03/02/2009

Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 11 REV B 03/02/2009

Wheel Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 12 REV B 03/02/2009

Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 13 REV B 03/02/2009

Motor Stop Assembly

AdjustmentPosition the hoist motor stop assembly on the hoist so it is centered side to side on the hoist platform. Changing the motor stop location front to rear is accomplished by sliding the straight portion of the motor stop arm through the U-bolts. This allows you to change the motor stop location to best position your boat on the hoist. Once the assembly is in the proper position, tighten the nuts on the U-bolts.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 14 REV B 03/02/2009

DW Leg Assembly (Optional)The deep water version of this boat hoist is assembled using the same assembly instructions as the standard hoist. The only items that are different between the two hoists are the length of the upright corner posts and the adjustable legs in-side them as identified in the drawings for deep water legs.

The water depth where your hoist is going to be installed will determine whether you should use the deep water version of this hoist.

The deep water version of this hoist can be used in deeper water depths because of the additional length of the exten-sion legs. Listed below is the amount of adjustment the vari-ous legs have.

• A standard leg shipped with the hoist has 20” of adjustment.

• The deep water legs have 55” of adjustment.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 15 REV B 03/02/2009

1/2” x 4” HH Bolt Qty: 1 (0110114)

3/8” x 6” HH Bolt Qty: 4 (0110068)

3/8” x 5-1/2” HH Bolt Qty: 12 (0110066)

3/8” x 3-3/4” HH Bolt Qty: 8 (0110059)

3/8” x 1-1/2” HH Bolt Qty: 13 (0140045)

5/16” x 3/4” HH BoltQty: 16 (0140022)

3/8” x 3/4” Carriage BoltQty: 8 (0210100)

5/8” Brass Hex NutQty: 10 (1410362)

5/8” Flat WasherQty: 6 (1340105)

#7 Hitch Pin ClipQty: 4 (1540300)

5/16” Flat WasherQty: 16 (1310085)

5/16” Lock WasherQty: 16 (1310025)

5/16” Hex NutQty: 16 (1410069)

3/8” Flat WasherQty: 37 (1340095)

3/8” Flange Lock NutQty: 45 (1440101)

1/2” Flange Lock NutQty: 1 (1440102)

1/2” Flat WasherQty: 1 (1340100)

0160054 Pre-Packaged Hardware Bag

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003776Page 32 REV B 03/02/2009

SSV40108 Decal Placement

4810700SS Big Wheel Embossed Decal

4850351Warning UP/DOWN Spin Wheel Decal

4811312Clamp Arrow Decal

4811312Clamp Arrow Decal

4811319Adjustable Gauge Decal

4811319Adjustable Gauge Decal

4850363 Safety

Instruction Decal

4850408Not A Step Decal

4850224Caution InspectCable Decal

4850359 Caution

Arrow - Raise Clockwise

Decal

4850206 Lube Tube

Decal

4811504 Weight Capacity

Decal

4811504 Maximum Load Decal 4850351 Spinning Wheel Danger Decal4811312 Clamp Arrow Decal4811319 Adj. Gauge Decal4850363 Safety Decal4850408 Not A Step Decal4850206 Lube Tube Decal4850359 Directional Arrow Decal4850224 Inspect Cable Caution Decal4810700 Big Wheel Decal