1

EQUIPMENT / INSTRUMENT FOR THQ HOSPITAL MURREE AND OTHER

HEALTH FACILITIES DISTRICT RAWALPINDI YEAR 2016-17

Sr. No 1 Clinical Specialty ICU Department Generic Name ICU/CCU bed – hydraulic operated Clinical Purpose Used for serious or paralyzed patients in ICU and CCU. QTY 10

TECHNICAL SPECIFICATIONS Complete CCU/ICU bed with following positions and features:- Positions: Height Adjustment: By foot pump (Imported) 40-75 cms hydraulically operated. Horizontal Tilting: Leg up 30 degree, leg down 20 degree controlled by a Bloc-o-lifting gas spring with step less movement with foot operated lever on foot side. Knee Break Adjustment: By gas spring mechanism by hand operated lever on both side. Back Rest: By means of Gas shock upto 70 deg. By hand operated on both sides. Castors: 5” ball bearing rust proof, water proof, high quality electrically conductive wheel castors with central brake system. Head raise and knee rise by gas shock mechanism to make a fowler position. Vascular position by means of lever or comb mechanism. Bedding area should be radio translucent (backelite or Melamine material) for doing X-ray and to apply “C” arm. Base and back rest should be designed to accommodate “C” arm in case of emergency. For cardiac catheterization and other procedures so the central area of back rest should be free of any metal part for “C” arm radiography. Should have cardiac chair position. Head and foot bows should be detachable in case emergency for doing intubation and CPR. Head and Foot Panel of ABS Material Dimensions: Bedding area: 200cm x 91cm Height: 40-75 cms adjustable. Main Frame: 1”x2” 16 SWG pipe round at all corners having a single invisible joint. Base Frame: Frame made of 1-1/2”x3” M.S. pipe 16 SWG “U” shaped. Finish: Polyester powder coating finish after treating with derusting and phosphating chemical / or sandblasting. Side Rail: collapsible in 2 steps made of 1” upper pipe ¾” 16 SWG supporting pipe and base 1-1/4”x1/4” M.S. plate. Sider Rails of non-magnetic SS Material, collapsible with locking mechanism S.S. 5/8” I.V. ROD: 4 prongs revolving height adjustable having I.V. ports on the sides of the bed.

2

Four reflecting bumpers. Urine bag holder and N.G. bag holder hooks. Basket for Urine pot. Basket for bed pan. Patient lifting pole S.S. ¾” on head side with triangular grip. Mattress: Foam 4” 1st quality with Rexene cover. Best quality at least meeting one standard 5 years warranty CE/FDA approved USA, Europe, Japan

Sr. No 2 Clinical Specialty ICU Department Generic Name Oxygen Regulator Clinical Purpose Use for oxygen regularization. QTY 30 Oxygen regulator for cylinder complete set double guage (one for set pressure and second for remaining pressure) and water container. CE/FDA approved As per sample approval

Sr. No 3 Clinical Specialty ICU Department Generic Name Ultra Violet rays Sterilizer Clinical Purpose Use for sterilization of different instruments. QTY 01 Quartz ball sterilizer Temperature range more than 200oC. Thermostatically controlled temperature for uniform temperature. Different sterilization times for different materials. Chamber dimension approx. 10 x 20 x 15 cm

CE/FDA Approved USA, Europe, Japan

Sr. No 4 Clinical Specialty ICU Department Generic Name Resussicitator Bag Adult with Mask set Clinical Purpose Use for resuscitation of patients. QTY 06 Manual Resuscitation bag with child size face masks and E2 valve. Resuscitation bag of 500mL capacity. 1.5L reservoir bag capacity. Autoclave able. The resuscitator to meet with all the requirements laid down by international standards. To be able to connect to an oxygen source up to 100%. The resuscitator to be able to ventilate through a mask or an endotracheal tube.

3

Complete with carrying case. CE/ FDA Approved

Sr. No 5 Clinical Specialty ICU Department Generic Name Resussicitator Bag Peads with Mask set Clinical Purpose Use for resuscitation of patients. QTY 04 Manual Resuscitation bag with adult size face masks and E2 valve. 2L reservoir bag capacity. Autoclave able. The resuscitator to meet with all the requirements laid down by international standards. To be able to connect to an oxygen source up to 100%. The resuscitator to be able to ventilate through a mask or an endotracheal tube. Complete with carrying case. CE/ FDA Approved

Sr. No 6 Clinical Specialty ICU Department Generic Name I.V/Cut down Instrument set Clinical Purpose Used for cannula surgery. QTY 01

1 Mayo Scissors 14cm TC Straight 1

2 Mayo Scissors 14cm TC Curved 1

3 Scalpel Handle #3 2

4 Scalpel Handle #4 3

5 Blades for Scalpel Handle #3 5

6 Blades for Scalpel Handle #4 5

7 Mayo Scissors 23cm TC Curved 1

8 Hartmann Forceps 10cm Straight 3

9 Crile Forceps 14cm Curved 6

10 Crile Forceps 14cm Straight 6

11 Rochester-Pean Forceps 20cm Curved 3

12 Rochester-Pean Forceps 20cm Straight 3

13 Halsted Mosquito Forceps 12.5cm Straight 6

14 Halsted Mosquito Forceps 12.5cm Curved 6

15 Rochester-Ochsner Forceps 16cm 1:2 Curved 1

16 Rochester-Ochsner Forceps 16cm 1:2 Straight 1

17 Rochester-Pean Forceps 16cm Straight 3

18 Rochester-Pean Forceps 16cm Curved 3

19 Dressing Forceps 16cm 2

20 Tissue Forceps 1:2 16cm 2

21 Adson Forceps 12cm 2

4

22 Adson Tissue Forceps 1:2 12cm 2

23 Adson Brown Forceps 7:8 12cm 2

24 Mayo-Hager Needle Holder 16cm TC 2

25 Babcock Forceps 17cm 2

26 Operating Scissors S/B 14.5cm Straight 2

27 Allis Tissue Forceps 4:5 15cm 2

28 Backhaus Towel Clamp 11cm 12

29 Senn Retractor 17cm Sharp 2

30 Senn Retractor 17cm Blunt 2

31 Us Army Retractor Set 21cm 2

32 Foerster Sponge Forceps 25cm 2

33 Sterilization Container 1

34 Instrument Tray for Above Mentioned Set

1

Sample provide as per above specifications along with material analysis report(composition of material and final hardness report).

02-years warranty. Local Made Best Quality as per Sample Approval ISO certified EN: 13485, FDA and CE approved. Original Japan/German steel Material.

Sr. No 7 Clinical Specialty ICU Department Generic Name Fiber Optic Laryngoscope with 4 blades Clinical Purpose Use for inserting ETT tube and other procedure. QTY 04 Macintosh Or Miller type blade Blade Sizes 1, 2, 3, plus medium stain blade SS/ corrosion free Blades. Dry Battery handle. Blades of stainless steel with integral light carrier. LED Fiber optic laryngoscope.

Complete with batteries and carrying case. FDA / CE approved Country of origin: USA, EEC, Japan

Sr. No 8 Clinical Specialty ICU Department Generic Name Hot Air Oven Digital Clinical Purpose Used for sterilization of instrument. Qty 03 Detailed Requirement:

Microprocessor based PID control Inner & outer made of stainless steel Stainless steel chamber with adjustable shelves and a

tough ended glass inner viewing door. At least two shelves made of stainless steel with adjustable height positions.

5

The outer cabinet is to be rust resistant Chamber Capacity: 50-60 Liters or more. Power Source 220V, 50HZ AC

User Adjustable Settings: Adjustable temperatures from ambient +5C up to 300C Stability: 0.25C Insulated control box

Displayed Parameters: Temperature Control for accurate results. Digital display to show the chamber temperature and time. Indicator lamps to show when the heater is active and if an over temperature condition

exists. The over temperature safety cutout to be set by the user.

CE/FDA Approved.

Accessories: Servo Controlled Voltage Stabilizer with surge protection facility Operating Manual with a Soft Copy Service Manual with a Soft Copy

Sr. No 9 Clinical Specialty ICU Department Generic Name Gum Elastic Bough (set of 3) Qty 01 1. Should be used for end tracheal tube sizes 6.0 to 11.0. The device is moderately flexible and can be bent into shape from its straight form, in which it is supplied. Bougies should be about 15F in diameter and 70cm in length, The tip of the bougie is angled at 30 degrees and should point anteriorly during intubation to facilitate navigation of the device towards an anteriorly-located larynx. CE/FDA Approved.

Sr. No 10 Clinical Specialty ICU Department Generic Name Blood Warmer Clinical Purpose Use for warming of blood particles (plasma, WBC, RBC) QTY 01 FOR WARMING OF BLOOD BAGS MINIMUM THREE TO FOUR BAGS CAPACITY Temperature setting: +37ºC to+44ºC Microprocessor controlled unit Blood warmer Voltage: 220 V, 50 Hz

CE/FDA Approved. USA, Europe, Japan

Sr. No 11 Clinical Specialty ICU Department Generic Name Mobile X-Ray 30 kw, 2 lead approan, 8 cassette

6

Clinical Purpose Use for diagnostic of orthopedic and other patients through X-rays.

QTY 01 Mobile Microprocessor based X-Ray Unit. High frequency, 30KW X-Ray Generator. 300 mA at 100 kv Anatomical programmed radiography. Digital display of all set parameters. Rotating anode x-ray tube, with dual focus / Single Focus Anode heat storage capacity of at least 100 KHU or more Electronic timer with exposure time of 1-2 msec. Automatic over-load protection device and automatic line compensation. The unit should be battery Operated and motor driven. 220 V, 50 Hz. Should be CE/FDA USA, Europe, Japan

Accessories: 1 x X-Ray castes set

Sr. No 12 Clinical Specialty ICU Department Generic Name Echo Cardio Graphy Clinical Purpose Use as diagnostic equipment for cardiac patients. QTY 01 SPECIFICATION: ECHOCARDIOGRAPHY MACHINE. A complete dedicated digital Echocardiography unit for wide range of premium performance application of cardiovascular imaging in pediatrics and adult. Mobile trolley mounted system with built in workstation / data management system for digital acquisition, storage and review of complete ultrasound studies including static and dynamic clips in DICOM format, read/write zoom. Studies can be reviewed and output to CD / DVD/MOD. The machine must have sharp and high quality image reproduction with heavy duty performance. It should have minimum following specification : DISPLAY: High resolution 1280x 1024 non interlaced, flicker free. Display size Min. 19” LCD,TFT, tilt able and swiveable type. OPERATING MODES: B, 2D M-Mode, Power Doppler, HPRF, Spectral Doppler, Color Doppler, Velocity Mode, Pw, Doppler, Duplex And Triplex Doppler, CW Doppler Steerable and ECG Gating, CONTROL PANEL: Alphanumeric keyboard with built-in trackball. Direct access to system functions through dedicated keys.

7

Indicator lights identify activated keys. Audio volume control with bidirectional / stereo speakers and foot switch User selectable image magnification control. Adjustable transmit focusing control. Total and Lateral Gran Compensation controls (6 or more). CALIPER / MEASUREMENTS : 6 to 8 calipers for measurement per screen trace length measurements for: Distance, angle, distance depth from skin line, area, circumferences, compound / volume, slope, time, heart rate and acceleration. APPLICATION: Cardiac, Peripheral, pediatric, adult cephalic and transesophageal with all required software for measurements. OPERATING MODES: 2D tissue, 2D angio flow, color M-Mode, tissue velocity M-mode, tissue strain imaging, continuous wave Doppler, tissue m-mode, pulse wave Doppler, tissue velocity imaging, tissue tracking, tissue synchronization, blood flow imaging, blood flow angio flow imaging. DISPLAY MODES: Live and stored display format: full size and split screen. Review image format: for still and cine, simultaneous capability B+PW, B+ CFM/TVI+PW, CW, B+ or triplex mode, , B+ color split screen display. Tissue Imaging, 2D mode, , M-mode, color Doppler imaging, color flow imaging, color Doppler imaging, color angio, color m-mode, blood flow imaging, blood flow angio imaging, tissue velocity imaging mode/CRT evaluation tool, tissue synchronization imaging mode, PW / HPRF Doppler, CW Doppler, vascular calculations/IMT, cardiac measurements. FRAME RATE (machine to be quoted with Maximum available frame rate) Min. 200fps in B-Mode and 100fps in Doppler mode. CINE MEMORY Min. Cine Memory for 1000 frames or 250mb min. IMAGE VIEWING DEPTH: 20 – 280 mm or more for cardiac application IMAGING MODES / TECHNIQUES: Tissue harmonic Imaging, Tissue Doppler Imaging, Color Angio, Tissue Velocity Imaging Tissue Imaging (Display real time Doppler shift information from moving tissue to better visualize and quantity myocardial function). Strain Imaging tools: Doppler(Doppler based as well as speckle tracking base) Quantitative strain rate imaging; An advanced quantitative technique of Tissue Doppler Velocity. Strain rate is a measure of the contractile motion of myocardium. The software should have the capability to show contrast agent only, tissue only or contrast and tissue displays. Vascular imaging software for carotids/IMT measurement. STRESS ECHO : Integrated multi stage stress echo system for advance and flexible stress echo Acquisition

8

and measurement for LV B-Mode imaging. Quantitative analysis for contrast during stress. examinations Used with TDI protocols. STORAGE DEVICE Built-in CD / DVD Drive WITH 10 DISKETTES. SYSTEM DYNAMIC RANGE Dynamic range minimum 160 dB or more COMMUNICATION SOFTWARE System should conform to DICOM 3 communication software for: Image Storage, print, Query / Retrieve, Network Communication. Probes: Should be light weight, capable of multiple centre frequencies on transmit for 2D, color Doppler PW/CW (Steerable) Imaging and to perform Harmonics. PORTS: Video Output USB / RS 232 Networking 220-240VAC 50 Hz CE/FDA Approved. USA, Europe, Japan

Accessories: STANDARD TRANSDUCERS: Linear Probe multi frequency to cover frequency of 6.0-8.0 MHz. Multi frequency Phased array sector probe to cover 2.0/2.5 – 4.0MHz. Multi frequency Phased array sector probe to cover 5.0 – 8.0MHz. CW Pencil Probe Online UPS for 30 min. backup time for complete unit including Printer.(Emerson,Liebert,Chloride,MGE & Riello) Digital B/W Thermal Printer with 50 rolls of papers. Jelly 20 L in bottles.

Operating manual, Services manual, error code book, part list and software if any. Warranty with all spare parts, during warranty period firm should maintain equipment’s and done PPM as per principle recommendation. If any spare part required during installation or PPM will be responsibility of the firm. Firm must send annual PPM schedule with installation report

Sr. No 13 Clinical Specialty ICU Department Generic Name Crash Cart Clinical Purpose Use for mobile purpose of equipment’s and medicines Qty 01 Technical specification

The emergency trolley must support different equipment for any type of intervention. Drawer always slide smoothly with double side wall construction.

All the accessories are easily attainable to reduce the maneuvers and the times of intervention.

9

CE/FDA Approved. USA, Europe, Japan

Accessories: 6 drawers unit. Drawer size 3” x 3, 6” x 2 & 9” x 1.

Recessed top storage area.

Side shelf.

Accessory panels.

Defibrillator shelf.

4 TENTE Casters 2 lockable.

Breakaway locking bar.

Stabilizing frame with bumper.

Durable aluminum mounting tracks.

Light System.

Stainless Steel I.V. pole.

Double push handle.

1 x Cylinder holder for D or E size cylinder I.

Cardiac board with bracket.

Universal rail system fitted to width of trolley.

Sr. No 14 Clinical Specialty ICU Department Generic Name Medicine Trolley Clinical Purpose Used for store and mobile purpose of medicines. Qty 03 Specification

For the storage and dispensing of medication by ward nursing staff. Frame and carcass shall be constructed from mild steel powder coated/ Polymer. Mounted on approx 125mm castors. The approximate internal dimensions of the medicine container shall be 80 w x50 d x30 h cm. The hinged lid of the unit shall slope down to the front. Lockable with heavy-duty dead lock. Shall be fitted with the following accessories:

o Document support on under lid surface. o 4 tier rack for holding medications. o Waste bins qty 2 off mounted under the medicine container. o Ampoule holding rack. o Dispensing tray to collect spillages when pouring liquid oral medication. o Side mounted fold-down writing flap. o Different compartments for medicines with labeling. o Lower shelf mounted under medicine container.

Unit shall be supplied with a security clamp for wall fixing at the appropriate location, thus ensuring that the trolley is secure when not in use.

Local Made, As per sample approved.

10

Sr. No 15 Clinical Specialty ICU Department Generic Name Instrument Trolley Clinical Purpose Used for mobile purpose of instruments. QTY 03 Specification

Frame and carcass shall be constructed from mild stain less steel.

Mounted on approx 125mm castors.

The approximate internal dimensions container shall be 80 w x50 d x30 h cm.

Lockable with heavy-duty dead lock.

Local, Best quality as per sample approval.

Sr. No 16 Clinical Specialty ICU Department Generic Name Bedhead Panel Clinical Purpose Used for connection of different equipment’s and gases. QTY 04 CE approved standard bed head panel. 3 deep socked and two multi socket for electrical. 2 out let for oxygen 1 x out let for vacuum 1 x out let for medical air Protection for gases and electrical connections Rust free material W x 8” min and L x 4 f min. One panel light One socket for nurse call

Sr. No 17 Clinical Specialty ICU Department Generic Name Temporary Pacemaker Single Channel Clinical Purpose Use in ICU for temporary pacing. QTY 01 Temporary pacemaker for cardiac pacing OPERATING FEATURES and CHARACTERISTICS: Asynchronous and demand moded operation Sensing: light indication Pacing: light indication Calibrated rate, output and sensitivity controls Defibrillator protected PARAMETERS: Stimulation control of current output upto 20mA Pulsing rate control adjustment upto 150 ppm/ 320 Sensitivity control upto 8mV Pulse width 1.5 m sec Asynchronous and demand mode switch

11

INDICATORS: Battery status light indication OTHER FEATURES: Portable Accessories including case and cables OPERATING REQUIREMENTS: Standard alkaline battery operation Backup operation during battery change. CE/FDA Approved. USA, Europe, Japan

Sr. No 18 Clinical Specialty ICU Department Generic Name Temporary Pacemaker Dual Channel Clinical Purpose Use for temporary Pace making. QTY 01 Dual chamber multi mode temporary 'pacemaker for cardiac Pacing OPERATING FEATURES and CHARACTERISTICS: LCD display of all pacing, sensing and warning indicators PARAMETERS: Multi-mode: all combinations of atrial,ventricular&dual;AA,VV,DD,A0,VO,DO,DV Adjustable pacing rate adjustment upto 150 ppm Adjustable pacing voltage upto 10V Sensitivity control upto 8mV Pulse width upto 1.5 m sec OTHER FEATURES: Portable Accessories including case and cables OPERATING REQUIREMENTS: Standard alkaline battery operation Backup operation during battery change

CE/FDA Approved. USA, Europe, Japan

Sr. No 19 Clinical Specialty Furniture and fixture Generic Name X-Ray Illuminator 4-Films

Clinical Purpose 10 LED type. Rust free material As per sample approval.

12

Sr. No 20 Clinical Specialty Nursing counter Generic Name Digital Weight Machine

Clinical Purpose Use to check patient weight. Qty 10 CE approved. Measuring range 1 to 150 KG min Comfortable for patients. Accuracy +- 95% min. Strong and rust less material.

Sr. No 21 Clinical Specialty Dialysis unit Generic Name Dialysis Chair

Clinical Purpose Used for dialysis patient during dialysis. QTY 06 Upper Frame: Made of M.S. Pipe 1”x 1-1/2” 16 SWG pipe rounded. Mattress Frame: 75cm x 140cm Height Adjustment: 45 to 75cm with Imported hydraulic pump. Tilt Angle: 5, 10, 20 degrees. All bedding area should have complete chair type position without having side main frame. The head position should be controlled by gas spring shock with convertible to chair position. Bedding area in 3 parts moveable. All bedding area should be cushioned and upholstered with Rexene and 4” foam mattress of 1st quality with Rexene cover. Head and foot Ends: Should be removable with laminated Lasani board ½’ thickness. Lower Frame: Under carriage should be 1-1/4”x2-1/2” pipe of 16 SWG with canti levered lifting structure. Hydraulic jack be placed in 16 SWG sheet. Box fixed with canti lever box moving attached to the upper frame. Pump should be operable from both sides of bed. Trendelenburg and reverse trendelenbug position by means of imported strong gas shocks by pressing a lever at foot end of the bed by foot operated lever. Castors: Four rubber bearing castors 125mm two of which with braking system, wear resistant, non-staining, non-discoloring, electrically conductive. Collapsible side rail with self-locking mechanism. Height adjustable I.V. pole both sides. One side board for arm rest which should be adjustable on each side. N.G. bag hooks, urine bag hooks. All moving parts should have bushes of ABS material. Finish: Polyester powder coating finish after treating with derusting and phosphating chemical OR sandblasting. Best quality at least meeting one standard Safe working load 16kg or more. CE/FDA Approved. USA, Europe, Japan

13

Sr. No 22 Clinical Specialty Physiotherapy Unit

Generic Name Shortwave Diathermy

Clinical Purpose Use for physiotherapy treatment protocols. QTY 01 Short wave diathermy recommended for therapeutic purpose in physiotherapy. Shortwave Frequencies continues and pulse. Continuous and Pulse Frequency / adjustable Duty Cycle. Multi-Frequency Treatment head pole. Automatic Power Switch-off and treatment time. Mains voltage: 100-240 V + 10% (50/60 Hz) or other CE/FDA Approved. USA, Europe, Japan

Accessories: Complete with standard accessories

Sr. No 23 Clinical Specialty Physiotherapy Unit

Generic Name Ultrasonic Therapy Unit

Clinical Purpose Use for physiotherapy treatment protocols. QTY 02 Ultrasound, Frequencies 1 and 3 MHz Continuous and Pulse Frequency / Duty Cycle 100 Hz / 5, 10, 20, 50% or more. Multi-Frequency Treatment head 1 and 3 MHz Large Contact Control Automatic Power Switch-off and treatment time Interruption in case of insufficient contact The visual indicator of the treatment head switches on when in proper contact Number of connections : 1 or more Intensity : 0-2 W/com2 continuous, 0-3 W/cm2 pulsed Programmable memory Mains voltage: 100-240 V + 10% (50/60 Hz) or other Anatomical based treatment modes. CE/FDA Approved. USA, Europe, Japan

Accessories: Complete with standard accessories

Sr. No 24 Clinical Specialty Physiotherapy Unit

Generic Name Electrotherapy Unit

Clinical Purpose Use for physiotherapy treatment protocols. Qty 02

14

Transcutaneous Electrical Nerve Stimulation (TENS) technology used by physical therapists. Features 3 pre-set pain programs (Arm/Shoulder, Lower Back and Leg/Foot)¬ and 2 massage-like modes (Knead and Steady) each with 10 adjustable levels of power intensity to help relieve pain almost anywhere Small, portable, easy-to-use, and can be used discretely anywhere Includes comfortable, self-adhesive Long Life Pads (1 pair) that are reusable up to 150 times with plastic holder for storageSafe, 100% drug-free relief for multiple pains CE/FDA Approved. USA, Europe, Japan

Sr. No 25 Clinical Specialty Physiotherapy Unit

Generic Name Microwave Therapy Unit

Clinical Purpose Use for physiotherapy treatment protocols. QTY 01 Microwave diathermy recommended for therapeutic purpose in physiotherapy. Microwave Frequencies continues and pulse. Continuous and Pulse Frequency / adjustable Duty Cycle. Multi-Frequency Treatment head pole. Automatic Power Switch-off and treatment time. Mains voltage: 100-240 V + 10% (50/60 Hz) or other CE/FDA Approved. USA, Europe, Japan

Accessories: Complete with standard accessories.

Sr. No 26 Clinical Specialty Physiotherapy Unit

Generic Name Hydrocolator

Clinical Purpose Used for pain and spasm management at physiotherapy department.

QTY 02 Technical specification

Approved and authorized for medical used with slandered 12 moist pack for all region. (shoulder, back and joints) Easley moved on rubber wheels Tank capacity: 69 litter Temperature range: 71- 74 c or more Power : 220-240v, 50/60 hz, 1000 w

Moist 12x30 cm Moist 25x30 cm Moist neckmodel, 15x61 cm Moist oversized, 38x61 cm Moist 25x45 cm Moist 25x60 cm

15

Moist 25x50 cm CE/FDA Approved.

USA, Europe, Japan

Accessories: Standard accessories.

Operating manual, Services manual, error code book, part list and software if any.

Sr. No 27 Clinical Specialty Physiotherapy Unit

Generic Name Wax Bath

Clinical Purpose Use for physiotherapy treatment protocols. QTY 02 Paraffin bath for pain relief.

The paraffin wax smoothens and softens skin on hands, elbows, and feet

Dial with multiple heat settings provides a full range of heat comfort levels

Indicator light glows when unit is operating.

Heater : two (1 kw each).

Thermostat to control temperature 30c to 100c or batter.

CE/FDA Approved. USA, Europe, Japan

Accessories: 6 kg wax two brush for wax. Aluminium sheet mesh for heater 2 thermal mitts, and 30 glove liners

Sr. No 28 Clinical Specialty Physiotherapy Unit

Generic Name Traction Unit with Treatment Coach

Clinical Purpose Use for physiotherapy and rehabilitation for cervical and lumber traction.

QTY 01 Traction Unit specification : Easy to operate 250° or more Pivoting User Interface Digital Monochromatic Touch Screen Interface Patient Data Cards record up to 14 treatments sessions or batter. Store up to 10 user defined protocols or batter. Intermittent, Static and Cyclic Traction Progressive and Regressive steps User-defined Hold, Rest and Treatment times Traction tension parameters: 0-200 lbs Must be used for cervical and lumber traction. Traction table specification:

16

Semi-pneumatic back rollers Leg rollers and rubber foot pad Must be used for cervical and lumber traction. Timer, filler block (insert), top pad and two-section pillow Standard Fixed Height - 26” / Width 21" or batter. Complete with standard accessories.

CE/FDA Approved. USA, Europe, Japan

Accessories: Complete with standard accessories.

Sr. No 29 Clinical Specialty Physiotherapy Unit

Generic Name Treadmill

QTY 01 Approved and authorised for medical use Treadmill ideal for Physiotherapy and cardio vascular rehabilitation Auto speed: Functional Exercise Programmes Negative Slope Angle: 0% to + 10% or more User interface must be user friendly Powerful and quietmotor The Treadmill meets the medical guidelines (Medical device Directive) and

guaratees medically responsible therapy and a high degree of safety. Loads upt 215 Kg or more Extremely low step height Minimum/Maximum Speed: 4.0-10 Km/hr (In step of 0.1Km/hr) or more Positive Slope Angle: 0% to + 15% or more Dimmension: 212 x 86 x 148Cm (lxwxh) or more Height of side bars: 61-108cm or others Max Permmisible Patient Weight: 235 Kg or more compatible for telemetery system

CE/FDA Approved.

USA, Europe, Japan

Accessories: Complete with standard accessories.

Sr. No 30 Clinical Specialty Physiotherapy Unit

Generic Name Treatment Coach

Clinical Purpose Used for patient examination. Qty 04 TECHNICAL SPECIFICATIONS Size: 24” x 72” x 32”, Made of 1-1/4”x1-1/4” square pipe 16 SWG bended at all corners not

17

welded. Back rest adjustable + 60 & -20 degree by means of lever ratchet mechanism. Bedding area ½” Lassani Wood upholstered with 2” foam 1st quality and good quality Rexene. Finish: All metal parts to be chemically degreased / derusted though phosphate treatment OR sandblasting and covered with electrostatic polyester powder coating. Best quality at least meeting one standard CE/FDA Approved. USA, Europe, Japan

Sr. No 31 Clinical Specialty Gynae Generic Name Delivery Table

Clinical Purpose Use for Delivery purpose Qty 04 TECHNICAL SPECIFICATIONS

Delivery Table made of tubular steel for frame.

Using mild steel pipe 1 ½” dia, 16 gauge, head and leg sections fully adjustable in any position.

The three section top on partal wood frame of at least ¾” thickness upholetered in washable superior quality raxine covered 4" thick foam of following make: Moulty Foam

suitable cut in foot section with one 14" S.S, basin 22 gage fitted in stand and basin fitting, under table. Sample provide as per above specifications

top rubberized of M.S sheet 18 gauge OVERALL SIZE L 72”x24” (W) x 32” H HEAD SECTION .30” (L) x 24” (W) CENTERSECTION 20”x24” FOOT SECTION 22’‘x24” having a suitable cut for basin Basin frame should be at-least 42” long at top transverse pipes on all sides for strengthening the leg of table. Finish powder coating Sample provide as per above specifications Local Made.

Sr. No 32 Clinical Specialty OT Generic Name Ultra Violet Light Clinical Purpose Disinfection of environment Qty 01 TECHNICAL SPECIFICATIONS

18

As per Sample Approved

Sr. No 33 Clinical Specialty Generic Name Magnifier Glass Clinical Purpose For Autopsy Qty TECHNICAL SPECIFICATIONS As per Sample Approved

Sr. No 34 Clinical Specialty Orthopedic Generic Name Plaster Cutting Electric Saw Qty TECHNICAL SPECIFICATIONS

FDA/CE Approved. USA, Western Europe or Japan

Sr. No 35 Generic Name Stadio Meter Qty 01 TECHNICAL SPECIFICATIONS

As per sample approved

Sr. No 36 Generic Name ENT Diagnostic Set Qty 01 TECHNICAL SPECIFICATIONS S.NO ITEM NAME QTY. 1 NASAL SPECULUM SET OF 5PCS.(Thedieum) 3 SET 2 EAR SPECULUM SET OF 3PCS. 3 SET 3 NASAL DRESSING FORCEPS /TELLES FORCEPS 3 4 EAR DRESSING FORCEPS 3 5 TUNNING FORK 2 6 LARYNGEAL MIRROR 2 7 SUCTION UNIT DXT 1 CHINA 1 8 DIAGNOSTIC SET GERMANY 1 9 KIDNEY TRAY 10" 4 10 F.BODY HOOK (EAR & NOSE) 3 each 11 CROCODILE FORCEPS 3 12 KILLIAN NASAL SPECULUM 4 13 SUCTION NOZAL 4 14 OTOSCOPES (Rechargeable with LEDs) 2

Local made

19

Sr. No 37 Clinical Specialty ENT Generic Name Headlight Qty 01 TECHNICAL SPECIFICATIONS Flexible headband Built in battery system LED illumination Light insensitivity 50,000 lux or more

CE/ FDA Approved. Country of Origin: USA, Europe, Japan

Sr. No 38 Clinical Specialty Orthopedic Generic Name DHS Instrument Set Qty 01 TECHNICAL SPECIFICATIONS

S No Description Qty

1 DHS GUIDE PIN W/THREAD D2.5 L230MM 1

2 DHS GAUGE L210MM 1

3 DHS DRILL AIMING GAUGE ADJUSTABLE 1

4 DHS DRILL W/COUNTERSINK L230MM 1

5 DHS SCREW TAP 1

6 DHS CENTERING SLEEVE SHORT 1

7 DHS CONNECTION SCREW 1

8 DHS CONNECTION SHAFT 1

9 DHS IMPACTION BOLT D20MM 1

10 DHS INSERTION INSTRUMENT W/T-HANDLE 1

11 DHS CENTERING SLEEVE LONG 1

12 DHS HOLDING SCREW W/STOP 1

13 DHS T-HANDLE W/HEXAGONAL CHUCK 1

14 DHS TRAY F/INSTRUMENTS 1

15 DHS TRAY F/IMPLANTS 1

16 BOTTOM F/1/1 CONT.PERFORAT.HEIGHT:135MM 1

17 PRIMELINE 1/1 LID BLUE 1

18 CLOTH F.LINING DEEP CONTAINERS 1

19 IDENT.LABEL UP TO 13 LETTERS RED 1

Country of origin: USA Western Europe Japan

Should be FDA or CE Marked

Sr. No 39

20

Clinical Specialty Orthopedic Generic Name GENERAL INSTRUMENT SET (STANDARD SET) Qty 01 TECHNICAL SPECIFICATIONS

S No Description Qty

1 BONE LEVERS,220mm long,10mm wide 2

2 IDEM,240mm long,17mm wide,broad tip 2

3 IDEM,240mm long,17mm wide,small tip 2

4 IDEM,270mm long,25mm wide,broad beak 2

5 RESPATORY,CURVED,STRAIGHT EDGE,13mm 1

6 IDEM,STRAIGHT,ROUND EDGE,14mm. 1

7 IDEM,SLIGHTLY CURVED,STRAIGHT EDGE,6mm 1

8 MALLET,550g 1

9 STILLE OSTEOTOME,10mm 1

10 IDEM,15mm 1

11 IDEM,25mm 1

12 SPONGIOSA CHISEL,10mm 1

13 VOLKMANN RETRACTOR,1-PRONG,SMALL,SHARP 1

14 RETRACTOR,MEDIUM SIZE,SHARP 1

15 STORAGE WIRE BASE 1

16 IDENTIFICATION LABELS,RED 2

17 WRAPPING DRAPE 1

Country of origin: USA Western Europe Japan

Should be FDA or CE Marked

Sr. No 40 Clinical Specialty Orthopedic Generic Name Orthopedic Micro Drill With Oscillating Saw System and K-

Wire Attachment. Qty 01 TECHNICAL SPECIFICATIONS

S No Description Qty

1 DRILL AND REAMER 1

2 DRILL ATTACHM.LARGE JACOBS 1

3 OSCILLATING SAW 1

4 CHARGING UNIT 1

5 BATTERY REMOVAL DEVICE 1

6 ECCOS SET MOTORS/ACCESSOR ( Sterilization Box) 1

7 REAMER ATTACHMENT AO LARGE 1

8 SAGITTAL SAW ATTACHMENT 1

9 DRILL ATTACHMENT AO SMALL 1

21

10 UNIVERSAL K-WIRE ATTACHMENT 1

11 SAW BLADE 1

Country of origin: USA Western Europe Japan

Should be FDA or CE Marked

Sr. No 41 Generic Name Ultrasonic Nebulizer Qty 02 TECHNICAL SPECIFICATIONS

Ultrasonic energy for uniform and highly dense 1-5 microns More than 96% of 0.3 micron or larger airs borne dust particles are effectively shut out with

the air filter to provide purified air for aerosol nebulization. Medication cup with replaceable diaphragm. Easily detachable fan cover and Air filter Made of highly resistant Sterilize able resin Stand with solution bottle for safety Nebulizing rate: 4 ml/min or greater. Mist particle size: Approx. 1-5 microns. Nebulizing time setting: 1-115 min or more Medication cup capacity: 150 ml. Rechargeable battery operated Accessories : Solution bottle 500 ml for approximate 4 hours continuous operation Solution bottle support Water Level controller Flexible arm Tray set for nebulizer with tray track and pole mount fitting

FDA / CE approved Country of Origin USA, Europe or Japan.

Sr. No 42 Generic Name Nebulizer Qty 04 TECHNICAL SPECIFICATIONS

Best Quality as per sample approval Imported

22

SPECIFICATION OF DEISEL GENERATOR SETS OF 100 KVA FOR THQ MURREE DISTRICT RAWALPINDI YEAR 2016-17

REQUIRED QTY: 01

Brand Olympian Cummins Mitsubishi F. G Wilson Siemens SDMO Engine along with country of Origin

Caterpillar (USA)

Cummins (UK)

Mitsubishi (Japan)

Perkins (UK) Perkins (UK) Volvo

(France/Sweden)

Volvo (France)

Alternator Along with Country of Origin

Olympian (USA)

Newage Stamford (UK)

Newage Stamford

(UK)

Newage Stamford

(UK) Leroy Somers

(France)

Volvo (France/Sweden)/

John Deere

Leroy Somers (France)

Capacity Prime Rating Diesel Generator Sets of 100 KVA Generator Type Heavy duty fabricated steel skid type based frame with anti- vibration mounting /

isolators.

Skid mounted radiator engine driven blower type fan & protecting guard.

Diesel day fuel tank for minimum 8 hours of continuous run.

Earthing & Neutral connections upto first water level. Engine Prime Power Rating in KVA

4 Stroke Diesel Engine

Water Cooled.

Direct coupled with alternator

Self ventilated/ Regulated. Alternator Brushless

Self excited

Automatic Voltage Regulated

Automatic Frequency Regulated

230/400 Volt 3-phase, 4 wire, 50 HZ (Nominal frequency)

F/H Type insulated. Speed 1500 RPM No of Cylinder Inline 3 to 6 Aspiration Natural/ Turbo charged Ambient Temperature

45 degree centigrade

Cooling System Water Cooled

Tropical Radiator with water level switch/ indicators Exhaust System Heavy duty Residential Grade Silencer with Flexible Exhaust Pipe Governor Mechanical/ Electric Protections Overload shutdown

Short circuit shutdown

Low oil pressure shutdown

High water temperature shutdown

Under- speed shutdown

Under- voltage shutdown

Over- winding temperature shutdown

Over- voltage monitoring and Tripping

Low- voltage monitoring and Tripping

Phase sequence Monitoring and Tripping

Phase Failure Monitoring and Tripping

23

Monitoring / Control Panel

Automatic Alarm Monitor

Under/Over Voltage

Emergency Stop Switch

Low Oil pressure

High Coolant Temperature

Fail to Start

Low/ High Battery Voltage Meter Metering Voltmeter

Frequency Meter

Ampere Meter

Hour Meter Batteries Maintenance free

Heavy Duty Lead Acid Batteries

Battery Rack and Cable

Auto Battery Charger Standard Accessories Standard Tool Kit

One Set of Air Fuel and Lubricating Oil, Filters

Technical and Operation Manual (Two Sets) Optional items (indenting officer to specify)

Local / imported according to Manufacturer’s Standards

Weather and sound proof and acoustic canopy with matching Silencer of approved Makes 85 db (A)(Residential Grading)

AMP Panel System

Manual Changeover Panel system Warranty 12 Month from the date of Testing and Commissioning.

LIST OF FURNITURE FOR THQ HOSPITAL MURREE & OTHER HEALTH INSTITUTIONS OF DISTRICT RAWALPINDI YEAR 2016-17

Sr #

Name of item Specification

Quantity

1 Executive Table

Size 36 x 72 Inch, Height 30 inch, Consists three draws right and one window draw left (All draws with locks). Top: leather cousin Made of high density shisham Win board finished with NC Lacquer.

06

2 Office Table for Specialist

Size: 36 x 60 inch, Height 30 inch, (with Top Glass) Front leather cousin Top / side panels made of high density chipboard pressed with shisham veneer on both sides. With 3-drawers. Top drawer lockable, with through back. Finished with N.C. lacquer.

30

3 Office Table Size: 36 x 60 inch, Height 30 inch, Top / side panels made of high density chipboard pressed with shisham veneer on both sides. With 3-drawers. Top drawer lockable, with through back. Finished with N.C. lacquer.

40

4 Computer Table

Made in Shesham Win board finished with NC Lacquare standard size One drawer with lock Large space in on one side to accommodate computer

10

5 Executive Chair Size back:75*53 seat:50*53, 06

24

material: PU, Mechanism: Tilt mechanism, Base: Painting base, Armrest: Painting armrest, Made by China

6 Office/ Visitor Chair

Size 20 X 20 (Choctaw), Height 18 inch Back 36 inch, seat and back with Cloth (Molty Foam). Inner structure made of solid seasoned shisham wood.

120

7 Office Chair Size 20 X 20, Height 18 inch, Back 36 inch, seat and back with Dhaka Canning Inner structure made of solid seasoned shisham wood.

150

8 Visitor Chair

Size 22 X 22 (Choctaw), Height 18 inch, Back40 inch, seat and back with leather cushion (Molty Foam) Inner structure made of solid seasoned shisham wood.

24

9 Computer Chair

Complete with revolving pedestal and height adjustment. As per sample Made in China

10

10 Revolving Stool

Strong with 5-prong base with stainless steel cladding height adjustable with gas shock / spring operated by foot lever. 14” seat and back upholstered with 1st quality foam of 4” x 8” x 2” respectively with fine quality Leather. Five 2” castors with brake height s adjustment 450-600 mm.

50

11 Side Rack

Size: 18 x 36 inch, Height 30 Structure made of Shisham win board. With one shelf. Finished with N.C. lacquer

46

12 Iron Safe

Heavy duty safe made of steel with durable. Electronic digital locking system One shelf and one drawer Medium Size

02

13 Steel Cabinet

Size: 6’ x 3’ X 1-1/2’ Made in stainless steel Shelves made of same material With two doors of 22 SWG Lock and key

25

14 Waiting Chair

The size of unit seat shall be approximately 480mm (H) x 570mm (W). 2.2.2. The length of the unit shall be as follow: Three (3) seater – 1400mm The each seat length shall be approximately 450mm. The spacing between each seat shall be approximately 25mm. The frame structure shall be constructed with durable steel able to resist to rust. All joints shall be welded and all exposed surfaces shall be straight and true to line and curve. The entire structure shall be coated with a layer of anti-corrosion paint follow by another 2 finishing coats either power coating or nylon polyester coating to withstand periodic cleaning and typical abuse. The unit should be heavy duty. The unit also must be sturdy and would not sink once sit upon.

70

15 Sofa Set Size 18 X 42 Inch 2 seater

10 set

LIST OF BEDDING & CLOTHING FOR THQ HOSPITAL MURREE & OTHER HEALTH INSTITUTION OF DISTRICT

RAWALPINDI YEAR 2016-17

25

Sr #

Name of item Specification

Quantity

1 BED SHEET Size 66 X 108 (Weave Health Department District Government Rawalpindi. Weight 1 kg

800

2 BED SHEET PLAIN Size (63X108) 300

3 BLANKET WITH SILK PIPING

Size 60 X 90 Weight 2400 Grams Red Color, Fine Quality

230

4 TOWELS Size 24” X 40” Fine Quality

70

5 PILLOW (COTTON) Standard Size 1000 Grams 230

6 DUSTERS Size 30” X 30” 100

Note: The samples of all Furniture and Bedding & Clothing items will be provided by the

bidders before opening of Financial Bid.

The sample approval committee is the final authority to approve or reject the samples.