SR-M - di-soric.com di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 /...
Transcript of SR-M - di-soric.com di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 /...
209200
© di-soric | Subject to modifications | 04/01/20 | Page 1 (2)
SR-M
Safety relay
di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach
Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com
TECHNICAL INFORMATION (typ.) +20°C, 24 V DC
Characteristic parameters Type 4 (IEC/TS 61496-2), SILCL 3 (IEC 62061) PL e - Cat. 4 (ENISO 13849-1)
Mounting rail fastening according to EN 50022-35 standard
Operating principle Safety relay with muting function
Size 99 x 35 x 114.5 mm (Dimensions)
Service voltage 19,2 ... 28,8 V DC
Inverse polarity protection Yes
Display LED for input / output status, muting sensor inputs and failurediagnosis
Start / restart automatic / manual (selectable on terminal block), interlock
External Device Monitoring - EDM Feedback input, enabling selectable
Reaction time < 20 ms
Ambient temperature, operation 0 … +55 °C
Protection class IP 20, (housing), IP 2X, (terminal blocks)
Suitable for all safety light curtains /-grids
Connection on terminal blocks
Scope of delivery Multi-language instruction manual
Two-channel inputs for safety light curtains / -grids 1
Status output PNP (1x), 100 mA, 24 V DC
Inputs for muting sensors 2x, 24 V DC, PNP, dark-on
Muting enable input 24 V DC, PNP or relay (highly active)
Muting lamp output 24 V DC, 0,5 ... 5 W
Muting time-out 30 sec. or infinite, selectable
99
35
114.5
Safety instructionsAll the installation, connection and safety regulations, as per our technicalinformation, have to be strictly adhered to.The set-up of the products have to be made by skilled staff, only.Repair exclusively made by di-soric.
E S P E
Usable for safety light curtains / -grids with safety level type 2
and type 4
Integrated muting function
Additional security functions
Start / Restart Interlock
EDM Feedback input for extra external contractors monitoring
LED indicators for status, muting and diagnosis
Inverse polarity protection
di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach
Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com
SR-M
Safety relay
209200
© di-soric | Subject to modifications | 04/01/20 | Page 2 (2)
TECHNICAL INFORMATION (typ.) +20°C, 24 V DC
Override time-out 15 min.
Override 2 operating modes selectable: manual action with hold to run orautomatic with pulse command
Safety relay outputs NO (2x), 2 A / 250 V AC