IRD 150 PSOK-IBS - di-soric.com · IRD 150 PSOK-IBS Inductive Ring Sensor di-soric GmbH & Co. KG...
1
204351 © di-soric | Subject to modifications | 24/08/18 | Page 1 (1) IRD 150 PSOK-IBS Inductive Ring Sensor di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com TECHNICAL INFORMATION (typ.) +20°C, 24V DC Operating principle Dynamic Inside diameter 151 mm Service voltage 10 ... 35 V DC (Supply Class 2) No-load current < 20 mA Resolution Ø 10 mm Sensitivity adjustment potentiometer Mounting distance to metal > 80 mm Switching output pnp, 200 mA, NO/NC, switchable Speed of parts < 25 m/s Minimum parts speed 0,1 m/s Pulse stretching 0,1 ... 150 ms adjustable Voltage drop < 2,0 V Response-/release time 0,20 ms / 0,20 ms Ambient temperature, operation 0 … +50 °C Insulation voltage endurance 1.000 V Protection class IP 67 Protection degree III, operation on protective low voltage Casing material Die-cast aluminium / ring POM Connection Connector, M12, 4-poled Connecting cable VK ... BN = brown BK = black BU = blue BN BK BU 1 4 3 S pnp Safety instructions The Instruments are not to be used for safety applications, in particular applications in which safety of persons depends on proper operation of the instruments. These instruments shall exclusively be used by qualified personnel. High resolution Short response time Sensitivity and pulse stretching adjustable Insensitive to dirt Dynamic operating principle Metal connector High protection class
Transcript of IRD 150 PSOK-IBS - di-soric.com · IRD 150 PSOK-IBS Inductive Ring Sensor di-soric GmbH & Co. KG...
204351
© di-soric | Subject to modifications | 24/08/18 | Page 1 (1)
IRD 150 PSOK-IBS
Inductive Ring Sensor
di-soric GmbH & Co. KG Steinbeisstraße 6 DE-73660 Urbach
Fon + 49 (0) 71 81 / 98 79 - 0 Fax + 49 (0) 71 81 / 98 79 - 179 [email protected] www.di-soric.com
TECHNICAL INFORMATION (typ.) +20°C, 24V DC
Operating principle Dynamic
Inside diameter 151 mm
Service voltage 10 ... 35 V DC (Supply Class 2)
No-load current < 20 mA
Resolution Ø 10 mm
Sensitivity adjustment potentiometer
Mounting distance to metal > 80 mm
Switching output pnp, 200 mA, NO/NC, switchable
Speed of parts < 25 m/s
Minimum parts speed 0,1 m/s
Pulse stretching 0,1 ... 150 ms adjustable
Voltage drop < 2,0 V
Response-/release time 0,20 ms / 0,20 ms
Ambient temperature, operation 0 … +50 °C
Insulation voltage endurance 1.000 V
Protection class IP 67
Protection degree III, operation on protective low voltage
Casing material Die-cast aluminium / ring POM
Connection Connector, M12, 4-poled
Connecting cable VK ...
BN = brown
BK = black
BU = blue
BN
BK
BU
1
4
3
Spnp
Safety instructionsThe Instruments are not to be used for safety applications, in particularapplications in which safety of persons depends on proper operation of theinstruments.These instruments shall exclusively be used by qualified personnel.
High resolution
Short response time
Sensitivity and pulse stretching adjustable
Insensitive to dirt
Dynamic operating principle
Metal connector
High protection class
