Spring Schedule 2012
Transcript of Spring Schedule 2012
-
8/3/2019 Spring Schedule 2012
1/22
I AMTomorrows
Spring Schedule 2012
-
8/3/2019 Spring Schedule 2012
2/222 Spring Schedule 2012
ACCREDITATIONThe programs at Pickens Technical College are approved jointly by the Colorado Community College and Occupational Education System and by the Aurora PubSchools Board of Education. The school operates under the governance of the Aurora Public School Board of Education and is member of, and accredited by, thNorth Central Association of Colleges and Schools as listed in the NCA Vocational/Adult Schools Directory.
ADMISSIONS REQUIREMENTSAs an Area Vocational School, Pickens Technical College provides Career & Technical education for both adult (post-secondary) and high school students. Post-econdary enrollment is available to any person, 16 years of age or older, regardless of their previous academic achievement or grade/degree levels attained.
We serve students from throughout Colorado, as well as from across the United States and the world. Our primary prerequisite is a desire to learn and work hardo achieve your academic and career goals!
This schedule is designed for Post-Secondary/adult students. High school students should see their high school counselor for information on available programsnd for registration details.
RESIDENCY REQUIREMENTSTo qualify for in-state tuition, a student (or the parents or legal guardian if the student is under 23 years old and not emancipated) must have been domiciled inColorado for 12 or more continuous months immediately preceding the first day of classes. Domicile for tuition purposes is determined by two factors: the ability how a permanent place of residence in Colorado and the ability to demonstrate intent to remain in Colorado. Several ways to prove intent to remain includeroviding evidence such as:
A. Paying Colorado income taxesB. Being permanently employed in Colorado
C. Owning residential Colorado real estateD. Holding a Colorado drivers license or vehicle registrationE. Registering to vote
NON-COLORADO RESIDENTS may attend Pickens Technical College, but under the provisions of the Colorado Statute 23-7-101 to 104, must pay out-of-state tuition whennrolled in state supported programs, which is two times the in-state rate.
MMIGRANT AND NON-IMMIGRANT ALIENSmmigrant and non-immigrant aliens must show their Permanent Resident card or visa to determine residency for tuition purposes.
MILITARY PERSONNELActive duty military personnel and their dependents upon moving to Colorado on a (PCS) basis are eligible for resident tuition rates.
ENGLISH LANGUAGE PROFICIENCYEnglish is the language used in all programs. Therefore, a basic ability to read, understand, write and speak English is essential for the student to be able toucceed.
NOTICE OF NON-DISCRIMINATIONAurora Public Schools does not discriminate on the basis of disability or gender in admission to its programs, services or activities, in access to them, in thereatment of individuals with disabilities or in any aspect of their operations. Aurora Public Schools does not discriminate on the basis of disability or sex in its hirinr employment practices. Detailed grievance procedures for persons who believe they have been victims of sex or disability discrimination have been developed.
Ask for the coordinator designated below for a copy of regulation ACA-R (sex) or ACE-R (disability). This notice is provided as required by Title IX of the EducatiAmendments of 1972 and by Title II of the Americans with Disabilities Act of 1990 and Section 504 of the Rehabilitation Act of 1973.
Questions, complaints or requests for additional information regarding the ADA, (Americans with Disabilities Act of 1990) Section 504 and Title IX may be forwarded tohe designated ADA, Section 504 compliance coordinator.
Name and Title: Kathleen Hostedler, Legal CounselOffice Address: 1085 Peoria StreetAurora, CO 80011
Phone: (303) 344-8060Days/Hours: Monday-Friday,
7:30 a.m. - 4:30p.m.
his notice is available from the compliance coordinator in large print, on audio tape and in braille.
Admissions & Registration Information
-
8/3/2019 Spring Schedule 2012
3/223
DROP/WITHDRAWAL PROCEDURESA student may officially drop from a class or program during the first 15 percent of class without having a grade recorded. Students who withdraw from class
program after the first 15 percent are not eligible for tuition refund, and will have a grade of W recorded in the permanent records.
Students who plan to discontinue class attendance should complete a withdrawal form in person at the Registration Office as soon as possible after the decisionas been made to discontinue attendance.
Students may not withdraw from a course after 75 percent of the scheduled time of the course has been completed. A letter grade will be given.
A students record will not be released until the drop/withdrawal procedure is completed. It is the students responsibility to keep the Registration Office informed ony change in class schedule.
Veterans and Students on Financial Aid Programs must notify the Pickens Technical College Financial Aid Office immediately of withdrawals, drops, or anyhanges in the program or class schedules. Notification of changes must be sent to funding agencies. Please contact the Financial Aid Office for assistance.
PROCEDURE TO WITHDRAW FROM A CLASS/PROGRAMWhen a student registers for a class or program, space is reserved under the assumption the student plans to complete the course(s). A student record is
tarted in the Registration Office computer.
To drop or withdraw from a class or an entire program, the student must go the Registration/Records Office to have an official drop/withdrawal form completeTelephone requests are not accepted.)
When a student drops or withdraws completely from the school, the registration receipt, which verifies financial information, and is used as studentdentification, must be surrendered to the Registration Office. It will be replaced with a copy of the drop/withdrawal form.
Until a student officially drops or withdraws at the Registration Office, the enrollment remains active with absences and grades recorded.
SCHEDULE CHANGESThe school reserves the right to cancel, discontinue, reschedule or combine classes, and to change instructors. Classes may be discontinued prior to the first orecond scheduled meeting if fewer than the required minimum number of students enroll.
CLASS CANCELLATIONSStudents should refer to the student calendar to determine when classes have been cancelled for school scheduled activities. In the case of emergency closing
f school or the onset of storm conditions, radio stations KOSI-AM 101 or KOA-AM 850 will be notified regarding school closings.
TUITION & FEES PAYMENTTuition and fees are paid in full at the time of registration. Tuition and fees may be paid by cash, check, Master Card or Visa.
Students registering jointly with another school will pay the full tuition and fees at Pickens Technical College, as advertised. All financial obligations to Pickens Techrom previous terms must be paid prior to continuing or re-enrollment.
FINANCIAL AIDinancial Aid is available in various forms through state and federal funding for students demonstrating documented need. Application materials are available at thinancial Aid Office. It takes up to four weeks to make a determination of eligibility -- apply early. For more information on programs, eligibility and availability,onsult the Financial Aid Handbook and the catalog.
bility to Benefit Law: Students requesting financial aid who do not have a high school diploma or GED will be required to pass the Accuplacer Test. Furthernformation on test times and dates and remediation courses is available at the Financial Aid Office.
REFUND POLICYThe refund policy for Pickens Technical College is based on the fact that tuition provides approximately 25 percent of the cost of education. When a student enroll
n a program/class, he/she reserves a place which cannot be made available to another student until he/she officially drops the program/class. In addition, atudents original enrollment represents a sizable cost to the State of Colorado whether or not he/she continues in the program/class. To be eligible for a tuitionefund, a student must officially drop the program/class and apply for a refund within the refund time period. There is a processing period of approximately three our weeks from the time a student requests a tuition refund to the time the refund check is mailed.
One hundred percent(100%) refund, less $20.00 processing fee, is granted to students for classes dropped from the first day of class through refund date.Refund date is the date when 15% of the semester has occurred.
No refund will be given for fees and other obligations not retrievable by the institution.
No refund will be given once 15% or more of the semester has elapsed.
When the class section is canceled due to lack of enrollment or other causes, the school will notify the students who are entitled to a 100% refund. Studentsmay come to the Registration/Records Office and choose from the class sections still available to substitute for the canceled class or apply for a refund.
Records will not be released until all obligations to Pickens Technical College are fulfilled.
A student receiving financial aid who withdraws during the semester may be required to repay a portion of the financial aid. For more informatioconcerning the methods of determining when a repayment may be due, contact the Financial Aid Office or refer to the Financial Aid Handbook .
Students whose tuition is being paid by an agency or third party are responsible for their tuition if the agency or third party does not pay.
Spring Schedule 2012
Admissions & Registration Information
-
8/3/2019 Spring Schedule 2012
4/224 Spring Schedule 2012
DEFERRED PAYMENT PLANA deferred payment plan is available to those students whose tuition is equal to or greater than $300. One-half of the tuition and a $10 processing fee is to be pat the time of registration. The remainder of the contract is due 30 days from the date of registration. The contract is signed by the student or legal guardian for thnpaid balance. Students not paying the balance due by the due date will not be allowed to re-enroll until the balance is paid in full and transcripts will not be
ssued. Students may be withdrawn from a class for non-payment.
ADVISINGPickens Technical College has licensed counselors & support staff that are available to discuss your options and utilize valuable career, personality and interesturveys to help you choose the career/educational path that is best suited to your individual situation.
The Advising/Counseling Staff are available to meet with students prior to and during registration to assist in the selection of classes or programs. A variety ofervices are available to students needing assistance in exploring career options. Inquiries should be made through the Counseling Office, 303-344-4910, whenhese services are desired so that appointments can be arranged. It is the responsibility of the student to seek the above services.
AWARDING OF PROGRAM CERTIFICATESStudents who have completed all certificate program requirements, who have met the specifications set forth in the Standards of Receiving a Certificate ofCompletion, and who have completed all financial obligations to Pickens Technical College are eligible to receive a Certificate of Completion.
PICKENS TECHNICAL COLLEGE/COMMUNITY COLLEGE ARTICULATIONSStudents desiring to complete an Associate of Applied Science Degree (A.A.S.) degree program, should complete the course for a certificate at Pickens TechnicalCollege and general education and/or other degree requirements at the participating community college from which the degree is earned. Depending on the cou
f study, credit in varying amounts from Pickens Technical College certificates can be applied toward the A.A.S. Management (Tech Management Emphasis) orAssociate of Applied Science Applied Technology Degrees at the community colleges. Each Applied Technology and Applied Management Degree requires theompletion of 60 semester hours. A maximum of 42 credits may be accepted by Community College of Aurora; the number varies by the certificate program and thegree selected.
n instances where the Pickens Technical College certificate program is less than 42 credits, sufficient credit must be earned through the Community College tomeet the 60 credit hour minimum requirement for the Applied Technology degree. A minimum of 18 credits must be earned at the Community College to meet the0 credit hour minimum requirement for the Applied Technology degree.
The Associate of Applied Science degree (A.A.S.) prepares students for career-ready employment in a given occupation or for upgrading skills. While theserograms are not intended to fully transfer to baccalaureate degree programs, some courses may be accepted toward a bachelors degree at colleges andniversities. Students are strongly urged to consult an academic advisor at the college of your choice and to consult the transfer guides and catalogs for theespective institutions.
WORK-BASED LEARNING
Pickens Technical College offers supervised work-based learning (e.g., internships, clinicals, apprenticeships, job shadowing, etc.) in most program areas. Somere program required, others are optional. These could be either paid or unpaid. In the case of unpaid work experience, on-the-job coverage for all PickensTechnical College interns will be provided through the Aurora Public Schools Workers Compensation Insurance. For more information regarding specific programsnd supervised work experience opportunities, please contact the Counseling Office at 303-344-4910.
SAFETY EQUIPMENTPersonal safety equipment, i.e., protective clothing, uniforms, safety glasses, welding gloves, etc., is required in several programs. Students will be advised bynstructors concerning safety equipment requirements. This equipment will be available for student purchase in the bookstore.
DENTIFICATION CARDSAll students at are required to have a Pickens Technical College Identification card visible at all times while on campus. ID cards are available in the registrationrea; replacement ID cards cost $5.00.
BOOKSTOREThe bookstore hours are 7:45a.m.- 2:00p.m. Monday through Friday when classes are in session. Please call to arrange the pickup of books or supplies if you arenable to visit during regular hours. ID cards are required for all purchases from the Pickens Technical College Bookstore.
ATTENDANCE POLICYRegular attendance is required of all students in order to retain enrollment status and earn course credit. Excessive absences may cause failure of the coursend/or dismissal from the class. See catalog for Attendance Policy.Note: Attendance at every class, including the first, is important for student success .
STUDENT CONDUCTStudents are expected to conduct themselves in a mature and responsible manner. See Student Conduct in the post-secondary catalog.
CAMPUS VISITSyou would like to visit our campus and meet with a counselor/advisor, please call (303)344-4910, ext 27909 or 27935.
Admissions, Registration & Student Services Information
-
8/3/2019 Spring Schedule 2012
5/225Spring Schedule 2012
Tuition & Fees 2011 - 2012
Program fees:Each program has a program fee that varies between $30.00 and $100.00depending on the amount of consumable supplies used each semester. For moreinformation, please check our website. www.pickenstech.org
Fill out an application.You may download one from our website:www.pickenstech.org and mail or fax to our registration office.Or fill out an application in person.
Fax: (303)326-1965 Mail Applications to:PTC Registation Office500 Airport BlvdAurora, CO 80011
If using financial aid, fill out the application on the FASFAwebsite: www.fafsa.ed.govPTC School Code: 012875
Register, in person, at the Registration Office. Finalizeregistration by showing proof of residency and paying all tuitionand fees.
Please note: if student is under 23 years of age, a copy ofparent/guardians proof of residency will need to be provided attime of registration. Also parent/guardian information will needto be provided on the admissions application. For Residencyrequirements, please see our online catalog. Visitwww.pickenstech.org and click on the Register link.
Make payment in Bookkeeping located in the Registrationarea.
For more information, please call (303)344-4910, ext 27797
Some classes start only once a year (or are on a space
available only entry) Please check our website for moreinformation
P O S T - S E C O N D A R YR E G I S T R A T I O N P R O C E S S
Cr Hrs Tuition Cr Hr Fee Total
0.5 38.00 20.00 58.00
1 76.00 20.00 96.00
2 152.00 22.00 174.00
3 228.00 24.00 252.00
4 304.00 26.00 330.00
5 380.00 28.00 408.00
6 456.00 30.00 486.00
7 532.00 32.00 564.00
8 608.00 34.00 642.00
9 684.00 36.00 720.00
10 760.00 38.00 798.00
11 836.00 40.00 876.00
12 912.00 42.00 954.00
13 988.00 44.00 1,032.00
14 1,064.00 46.00 1,110.00
15 1,140.00 48.00 1,188.00
16 1,216.00 50.00 1,266.00
17 1,292.00 52.00 1,344.00
18 1,368.00 54.00 1,422.00
19 1,411.00 55.00 1,466.00
20 1,454.00 56.00 1,510.00
21 1,497.00 57.00 1,554.00
22 1,540.00 58.00 1,598.00
23 1,583.00 59.00 1,642.00
24 1,626.00 60.00 1,686.00
25 1,669.00 60.00 1,729.00
26 1,712.00 60.00 1,772.0027 1,755.00 60.00 1,815.00
28 1,798.00 60.00 1,858.00
29 1,841.00 60.00 1,901.00
30 1,884.00 60.00 1,944.00
31 1,927.00 60.00 1,987.00
32 1,970.00 60.00 2,030.00
33 2,013.00 60.00 2,073.00
34 2,056.00 60.00 2,116.00
Resident Tuition
The above rates are based on $76.00 per semester credit hrs
for 1-18 semester credit hrs for residents. For 19 semester
credit hrs and above the rate will be $43.00 for each additional
semester credit hour for residents. Seminars listed at a half
credit hour unit will be charged half the rate for one credithour. Credit hour fees reported in the above schedule include
only the basic fees associated w/regular student enrollment
i.e. college fee and student enrollment fee. Other specialized
fees are not included in the above schedule.
Attn: ALL High Cost program Students: There is a differential fee of $33.00per credit hour. Other fees may apply. Please call (303)344-4910 for moreinformation. Please visit our website at www.pickenstech.org to viewnon-resident and high cost tuition information.
Please note: Tuition and fees are subject to change.
Additional fees may apply, please contact our AdvisingDepartment (303)344-4910, ext 27909 or ext 27935
Admissions Information, Tuition & Fees
-
8/3/2019 Spring Schedule 2012
6/226
AUTOMOTIVE TECHNOLOGY
Diagnose, maintain, and repair a wide range of vehicles Use the same advanced diagnostic and repair equipment as Master Technicians to troubleshoot complex automotive systems Work on todays complex vehicle computers and advanced under-car systems
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
The following certificates may be earned:Automotive Engine Performance Certificate Total Credits: 12 (Fall Semester)Automotive Suspension and Steering Certificate Total Credits: 12 (Fall Semester)Automotive Braking Systems Certificate Total Credits: 8Automotive Heating and Air Conditioning Certificate Total Credits: 6Automotive Electricity and Electronics Certificate Total Credits: 12Automotive Technology Service Certificate Total Credits: 50Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12-14
Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A61 Martin, E/Werner, R
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF A61 Martin, E/Werner, R
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
BARBER
Work on-site in a full-service shopDevelop expertise in shampooing, hair cutting, hair coloring, shaving, permanent wave, as well as facial massage and skin care
Prepare for the state license exam
Career Focus: Prepared for state licensure, immediate employment, and further education
College Credit Certifications Scholarships
The following certificate may be earned:Barber Certificate Total Credit hours: 53
Spring Semester Total Credits: 17-19Dates Time Days RM Inst1/5-5/23 5:00-10:00P MTWR A174 Staff
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Spring Schedule 2012
Programs
-
8/3/2019 Spring Schedule 2012
7/227 Spring Schedule 2012
BUSINESS AND COMPUTER TECHNOLOGY
Develop technical and business skills required for a variety of office and computer technology positionsUtilize a variety of office software and new web applications that are relevant in todays business worldEngage in project-based learning activities related to everyday business environments
Career Focus: Prepared for further education and immediate employmentCollege Credit Certifications Scholarships
The following certificates may be earned: 14Business and Computer Skills Total Credit hours: 13Business and Computer Technology Total Credit hours: 27Business and Computer Technology Expanded Total Credit hours: 29
Spring Semester Total Credit: 14-16Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A119 Powers, K
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF A119 Powers, K
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
CABINETMAKING AND MILLWORK
Conceive, design, and fabricate customized kitchens and bathroomsConstruct custom woodwork including cabinets, doors, railings, and trim using advanced tools and equipment
Stain and spray finishes.Construct counter tops
Install finished cabinets and countertops
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
Purchase of minimum tools and safety equipment required - see instructor or our counseling office for details
New students entering the program are required to participate in a basic skills assessment to insure proper placement at Pickens Technical College. Personswishing to enter the program other than at the start of the fall semester, must have instructor approval before enrolling.
Students must ride the school bus to and from the housing project site.
The following certificate may be earned:
Cabinetmaking and Millwork Certificate Total Credit hours: 32
Spring Semester Total Credits: 16
Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A104 Casillas, J& 8:50-11:00A W
1/5-5/23 12:05-2:55P MTRF A104 Casillas, J& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
8/228 Spring Schedule 2012
COLLISION REPAIR TECHNICIAN*
Design, paint, and refinish vehicle services using modern welding, sanding, masking, and painting proceduresAssess, estimate, repair, and replace the body and interior of vehiclesWork in a professional environment with advanced equipment
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Internships
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
COMPUTER AIDED DRAFTINGCreate 2D and 3D drawings to solve architectural, engineering, and manufacturing challengesUse the same hardware and software as professional engineersDevelop a professional portfolio
Career Focus: Prepared for immediate employment, advanced certifications, and further education
College Credit Certifications Early Placement
All course work must be completed with a grade of C or better to count towards the Computer Aided Drafting Program certificates.
The following certificates may be earned:CAD - Basic Certificate - Total Credits: 14CAD - Intermediate Certificate -Total Credits: 28CAD Advanced I Certificate - Total Credits: 40CAD Advanced II Certificate - Total Credits: 54CAD - Basic Employment Skills Certificate - Total Credits: 7CAD - Advanced Employment Skills Certificate - Total Credits: 7Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12-14Dates Time Days RM Inst
/5-5/23 7:50-10:40A MTRF B100 Payne, S
& 8:50-11:00A W/5-5/23 12:05-2:55P MTRF B100 Payne, S
& 12:45-2:55P W
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
CONSTRUCTION TECHNOLOGY*
Build a custom residential homeWork in all aspects of construction including framing, roofing, interior and exterior finishing, and estimatingnterpret blueprints and building codes for a wide range of projects
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
Programs
-
8/3/2019 Spring Schedule 2012
9/229 Spring Schedule 2012
COSMETOLOGY
Work on-site in a full-service salon and spaCreate unique hair designs, artistic nails and skin care regimens for clientsDesign a salon from concept to start up
Career Focus: Prepared for state licensure, immediate employment, and further education
College Credit Certifications Scholarships
The following certificate may be earned:Cosmetology Certificate Total Credits: 63
Spring Semester Total Credits: 15-17Dates Time Days RM Inst1/5-5/23 7:50A-11:50A MTRF A169 Staff
& 8:50A-12:20P W1/5-5/23 12:25-4:25P MTRF A169 Staff
& 12:55-4:25P W1/5-5/23 5:00-10:00P MTWR A169 Staff
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
DENTAL ASSISTING
Assist chairside with dental proceduresPerform lab work, take x-rays, and dental impressionsDevelop a professional work ethic and patient care techniques
Career Focus: Prepared for immediate employment and further education
College Credit Clinical Internships Scholarships
The following certificates may be earned:Dental Assisting Certificate Total Credits: 50Expanded Duty Dental Assisting - Total Credits: 2Please call our counseling office at (303)344-4910 for more information on these certificates.
Part-time new students may register for morning classes only for Spring Semester.
Spring Semester Total Credits: 10-13
New Students1/5-5/23 7:50-10:40A MTRF B121 Ehgotz,T/Einsle, K
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF B121 Ehgotz, T/Einsle, K
& 12:45-2:55P W
Note: Part-time students may attend afternoons only in Fall Semester
Dates Time Days RM InstContinuing Students1/5-5/23 7:50-10:40A MTRF B122 Butler-Brown, C/Franklin, T
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF B122 Butler-Brown, C/Franklin, T
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
EXPANDED DUTY
DENTAL ASSISTING
Class available
see page 22 for more information
-
8/3/2019 Spring Schedule 2012
10/2210 Spring Schedule 2012
DIESEL POWER MECHANICS
Troubleshoot, repair, overhaul and assemble heavy-duty engines and electronics Use the same equipment and techniques as professional mechanics Practice shop safety and effective tool selection
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Internships
The following certificates may be earned:Medium and Heavy Trucks/Preventative Maintenance Certificate Total Credits: 6Medium and Heavy Trucks/Brakes Certificate Total Credits: 6Medium and Heavy Trucks/Electronic & Computers Total Credits: 12Medium and Heavy Trucks/Diesel Engines Certificate Total Credits: 12Medium and Heavy Trucks/Steering & Suspension Certificate Total Credits: 6Medium and Heavy Trucks Diesel Mechanics Certificate Total Credits: 48Diesel Equipment Technology Certificate Total Credits: 48Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF B160 Kubick, R
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF B160 Kubick, R
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
ELECTRICIAN OCCUPATIONS*
Design, stage, and install commercial and residential electrical wiring for power control systems from rough-in to finishUse logical thinking and math to interpret blueprints and layout designFocuses on proper use and application of National Electric Code NFPA 70
Career Focus: Prepared for apprenticeship, immediate employment, and further education
College Credit Certifications Internships
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information
Programs
-
8/3/2019 Spring Schedule 2012
11/2211
ENERGY TECHNOLOGYFormerly Renewable Energy Technician
Design, stage, and install commercial and residential electrical wiring for stand alone and grid tie systems.Use logical thinking and math to interpret blueprints and layout designWork in an entry-level position in the Solar Electrical Generation Field
Career Focus: Prepared for apprenticeship, immediate employment, and further education
College Credit Certifications Internships
The following certificate may be earned:PV Installer Total Credits: 8Energy Professional Total Credits: 9PV Installer Advanced Total Credits: 8Service Learning/Energy Professional Advanced Total Credits: 6-8Renewable Energy Total Credits: 33Renewable Energy Expanded Total Credits: 35Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 15-19
Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF B190 Moore, L& 8:50-11:00A W
1/5-5/23 12:05-2:55P MTRF B190 Moore, L&12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Spring Schedule 2012
Programs
Aircraft Maintenance
Cake Decorating
Culinary Arts
Dispensing Opticianry
Event Management
Fashion Design
Fitness TrainerGeographic Information Skills
Professional Floral Design
Check out these great programs at Emily Griffith Opportunity School!
Please visitwww.EmilyGriffith.eduor call(720)423-4700for more information
Legal Secretary
Medical Transcription
Pharmacy Technician
Phlebotomy
Professional Baking
Real Estate Appraiser and Broker
Tax PreparationWedding Planner
-
8/3/2019 Spring Schedule 2012
12/2212 Spring Schedule 2012
ENTERPRISE COMPUTER SERVICE TECHNICIANFormerly Computer Service/Network Technician
Service, maintain, and repair computers and networking systemsDesign, install and troubleshoot local area network systems
Secure computers and networksPrepare for A+ Certification, Network+ Certification, and Security+ Certification exams
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
The following certificates may be earned:
A+ Technician Certificate Total Credits: 8A+ Advanced Technician Certificate Total Credits: 8Network Service Technician Certificate Total Credits: 9Security Fundamentals Certificate Total Credits: 9Enterprise Computer Service Technician Certificate Total Credits: 34
Enterprise Computer Service Technician Expanded Certificate Total Credits: 36Mobile Apps Certificate (see page 62) Total Credits: 12Computer Service/Network Technology Certificate Total Credits: 64
Please call our counseling office at (303)344-4910 for more information on these certificates.
Network Service TechnicianSpring Semester Total Credits: 9Dates Time Days RM Inst1/5-3/9 7:50-10:40A MTRF B145 Bowen, J
& 8:50-11:00A W
Security Fundamentals Technician
Spring Semester Total Credits: 9
Dates Time Days RM Inst3/12-5/23 7:50-10:40A MTRF B145 Bowen, J
& 8:50-11:00A W
A+ Technician
Spring Semester Total Credits: 8Dates Time Days RM Inst1/5-3/9 12:05-2:55P MTRF B180 Auda, D
& 12:45-2:55P W
A+ Advanced TechnicianSpring Semester Total Credits: 8Dates Time Days RM Inst
3/12-5/23 12:05-2:55P MTRF B180 Auda, D& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
13/2213 Spring Schedule 2012
ENTERPRISE SECURITY
The following certificates may be earned:Enterprise Security Certificate Total Credits: 15Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 15Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF B145 Bowen, J
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF B180 Bowen, J
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
ESTHETICIAN
Specialize in the care and treatment of skin
Deliver unique services such as day spa facials, exfoliation treatments, professional make-up, and waxingPrepare for the state license exam
Career Focus: Prepared for state licensure, immediate employment, and further education
College Credit Certifications Scholarships
The following certificate may be earned:Esthetician Certificate Total Credits: 26
Spring Semester Total Credits: 13Dates Time Days RM Inst1/5-5/23 7:50A-10:50A MTRF A121 Hail, P
& 8:50A-11:50A W1/5-5/23 12:25-3:25P MTRF A121 Graham, M
& 12:55-3:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
FILM PRODUCTION
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
FOUNDATIONS FOR HEALTHCARE PROFESSIONALS
Prepare for a wide-range of entry level medical careers utilizing the most current industry standard equipment.Become a goal oriented healthcare practitioner.Integrate seamlessly with other medical professionals.
Career Focus: Prepared for further education, licensure, and immediate employment
College Credit Certifications Clinicals
The following certificates may be earned:Foundations for Healthcare Professionals Certificate Total Credit hours: 28Nurse Aide Total Credit hours: 13.5First Responder Total Credit hours: 14.5
Spring Semester Total Credits: 14Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF M78 Dacus, S/Fending, D
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF M78 Dacus, S/Fending, D
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
14/2214 Spring Schedule 2012
GENERAL ELECTRONIC TECHNOLOGY
Program, build, and test a wide range of electronic circuitry and equipmentExplore AC/DC circuitry through the use of schematics and drawingsUse troubleshooting skills to repair analog and digital systems
Career Focus: Prepared for further education and immediate employment
College Credit Certifications Early Placement
The following certificates may be earned:Analog Electronics Technician Certificate - Total Credits: 15Digital Electronics Technician Certificate - Total Credits: 15General Electronics Technology Certificate - Total Credits: 30General Electronics Technology Expanded Certificate - Total Credits: 32Computer Service/Network Technology Technician - Total Credits: 65Please call our counseling office at (303)344-4910 for more information on these certificates.
Digital ElectronicsSpring Semester Total Credits: 15
Dates Time Days RM Inst1/5-5/23 12:05-2:55P MTRF B130 Holmes, J& 12:45-2:55P W
Analog ElectronicsSpring Semester Total Credits: 15Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF B130 Auda, D
& 8:50-11:00A W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
GENERAL SERVICE TECHNICIAN
Develop knowledge of and perform services as an automotive maintenance technician Perform entry level general vehicle repair and ongoing maintenance Work everyday in a modern NATEF Certified automotive service facility Complete competencies required for ASE certifications testing
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
The following certificate may be earned:General Service Technician Certificate - Total Credits: 29
Spring Semester Total Credits: 14Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF D120 Atencio G
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF D120 Atencio G
&12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
15/2215 Spring Schedule 2012
HAIRSTYLIST
Work on-site in a full-service salonStyle, perm, cut and color hair using the latest techniquesUse your creativity to develop unique hairstyling and color treatments
Career Focus: Prepared for state licensure, immediate employment, and further education
College Credit Certifications Scholarships
The following certificate may be earned:Hairstylist Certificate Total Credits: 43
Spring Semester Total Credits: 13-15Dates Time Days RM Inst1/5-5/23 7:50A-11:50A MTRF A169 Staff
& 8:50A-12:20P W1/5-5/23 12:25-4:25P MTRF A169 Staff
& 12:55-4:25P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
HEATING AND AIR CONDITIONING
Install and maintain a wide variety of heating and air conditioning systemsTroubleshoot and repair residential and some commercial systemsUse high-tech computer simulation programs
Career Focus: Prepared for immediate employment, advanced certifications, and further education
College Credit Certifications Internships
An on the job internship program with Aurora Public Schools Maintenance Department is offered where students can get experiencewith accomplished HVAC Technicians.
Daytime programs may be entered in August or January at the start of new semesters.Evening classes may only be entered in August at the start of fall semester.
The following certificates may be earned:Heating Service Technology Certificate - Total Credit hours: 16Air Conditioning Service Technology Certificate Total Credit hours: 16Please call our counseling office at (303)344-4910 for more information on these certificates.
Dates Time Days RM InstAir Conditioning - Semester Total Credits: 161/5-5/23 7:50-10:40A MTRF B185 Blackwell, W
& 8:50-11:00A W
Heating - Spring Semester Total Credits: 161/5-5/23 12:05-2:55P MTRF B185 Blackwell, W& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
16/2216 Spring Schedule 2012
LANDSCAPE MANAGEMENT
Design, install, and maintain creative residential and commercial landscapesUtilize an extensive knowledge of plants and creative design elements to construct creative natural living and recreational spacesOperate and maintain professional landscape equipment
Career Focus: Prepared for immediate employment and further educationCollege Credit Certifications Scholarships
All classes train towards industry certificates.
All coursework must be completed with a C or better to count towards one of the Landscape Management certificates.
The following certificates may be earned:Entry-Level I Landscape Management Certificate Total Credits: 23Entry-Level II Landscape Management Certificate Total Credits: 25General Landscape Design Certificate Total Credits: 29General Landscape Operations Certificate Total Credits: 25Landscape Management Certificate Total Credits: 50Landscape Assistant Certificate Total Credits: 8Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12-14Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF C102 Cary B
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF C102 Cary B
& 12:45-2:55P W
Landscape Assistant CertificateSpring Semester Total Credits: 4Dates Time Days RM Inst1/5-5/23 9:15-10:45A MTWRF C102 Cary B
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
MEDICAL OFFICE TECHNOLOGY
Perform the administrative tasks of a medical receptionist, including registering new patients, scheduling appointments, and processing insurance claimsOrganize medical office dataIntegrate ethical standards, confidentiality and professionalism when interacting with patients, clients, and coworkers
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Internships
The following certificates may be earned:Medical Office Skills - Total Credit hours: 13Medical Office Technology Total Credit hours: 27
Medical Office Technology Expanded Total Credit hours: 29
Spring Semester Total Credits: 14-16Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A117 Sloan J
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF A117 Sloan J
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
17/2217 Spring Schedule 2012
MOBILE APPS
Students will be creating applications for various mobile devices (iPads, iPod Touch, iPhones) by writing code and programming in JAVA andApples Software Development (SDK). Outcome at the end of the semester is for students to create an application that they will be able topost on Apple Corporation, Apps Store in iTunes.
The following certificate may be earned:
Mobile Apps Certificate Total Credits: 12
Spring Semester Total Credits: 12Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF B140 Holmes J
& 8:50-11:00A W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
MULTIMEDIA DESIGN
The Multimedia Design program prepares students for a variety of print and digital related career paths that include graphic design, web design, illustration,layout and print design. First semester students will focus on design principles, the study of typography and color theory practices as well as learn how to usetwo software components for photo manipulation and digital art creation. Second semester students will learn to operate a variety of cutting edge softwareprograms used by designers in conjunction with design related projects based around logo design, web design, animation and illustration. Students will learnto operate all software on both MAC and Windows based platforms.
Second year students develop and refine their design and software skills through a variety of projects that include poster design, annual reports, ad layouts, adcampaigns, web design, skills needed to be a freelance designer and becoming a freelance designer and assembling a professional portfolio for employability.
Prerequisite: Keyboarding skills, basic computer operating and file management skillsThe ability to use a T-square, ruler and French curve for hand rendered compositionsBasic hand drawing and illustration skills
Create advertising projects from concept to completion using the same software as design professionals
Develop skills in design, typography and illustration
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
The following certificates may be earned:Graphic Design I Certificate Total Credits: 17Design Production I Certificate Total Credits: 18Graphic Design II Certificate Total Credits: 18Design Production II Certificate Total Credits: 18Multimedia Graphic Design Specialist Total Credits: 35Multimedia Design Production Specialist Total Credits: 36Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 17-18Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A48 Warner/Lawson
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF A48 Warner/Lawson
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
18/2218 Spring Schedule 2012
NAIL TECHNICIAN
Work on-site in a full-service salonProvide manicures, pedicures, and specialty services to clientsConcentrate on techniques that include: acrylic nails, silk wraps, gels, nail art, and paraffin treatments
Career Focus: Prepared for state licensure, immediate employment, and further educationCollege Credit Certifications Scholarships
The following certificate may be earned:Nail Technician Certificate Total Credits: 23
Spring Semester Total Credits: 10-13Dates Time Days RM Inst
/5-5/23 7:50A-10:50A MTRF A138 Woods, S& 8:50A-11:50A W
/5-5/23 12:25-3:25P MTRF A138 Vigil, D& 12:55-3:50P W
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
NURSE AIDE
Work as a nurse aide in an extended care facility, hospital or home health organizationUse professional medical equipment and technology in a clinical environmentDevelop quality patient care techniques and a professional work ethic
Career Focus: Prepared for immediate employment and further education in the medical field
Clinical Experience College Credit
The following certificate may be earned:Nurse Aide Certificate Total Credits: 5
Spring Semester Total Credits: 5Dates Time Days RM InstNUA 101
/9-3/7 5:00-9:00P MTW M78 Staff/13-5/15 5:00-9:00P MTW M78 Staff
NUA 170 - Clinical/11, 2/25, 3/3 6:00A-5:00P S TBA Staff/21,4/28, 5/12 6:00A-5:00P S TBA Staff
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Registration Note: Due to the high volume of interest in the Nurse Aide program, students must register and pay for the class to be considered. Placementn the class is on a first come, first serve basis. For further questions please call 303 344-4910 ext-27732.
Programs
-
8/3/2019 Spring Schedule 2012
19/2219 Spring Schedule 2012
POWER SPORTS TECHNOLOGY
Maintain, repair, and overhaul sport vehicles including motorcycles, ATVs, snowmobiles, and personal watercraftUse professional troubleshooting and diagnostic equipment and techniquesPractice shop safety and effective tool selection
Career Focus: Prepared for immediate employment and further education
College Credit Certifications
The following certificates may be earned:Power Sports Technology Basic Technician Certificate Total Credits: 24Power Sports Technology Basic Technician Expanded Certificate Total Credits: 27Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 14-17Dates Time Days RM Inst
/5-5/23 7:50-10:40A MTRF B170 Laing, T& 8:50-11:00A W
/5-5/23 12:05-2:55P MTRF B170 Laing, T& 12:45-2:55P W
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
PRACTICAL NURSING*
There is a high demand for this program. Applications are accepted each year for the following school year. ALLprerequisites and the TEAS V examinationmust be completed prior to beginning the application process.
Work with professional nurses and physicians in a clinical environmentUtilize therapeutic communication and clinical thinking skills to provide quality patient careExperience rigorous curriculum with relevant clinical instruction in a variety of settings
Career Focus: Prepared for further education, licensure, and immediate employment
College Credit Certifications Clinicals
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
PRECISION AND COMPUTER AIDED MACHININGnvent, design, and manufacture the tools and components for a wide-range of production needsUtilize advanced computer-controlled technology to create steel, aluminum, and plastic componentsWork daily with the same equipment and techniques as industry leaders
Career Focus: Prepared for immediate employment, advanced industrial certifications, and college in engineering
College Credit Certifications Internships
Upgrading by local machinists is another option without achieving either a degree or a certificate.
pprenticeships may be available with local machine shops.
The following certificates may be earned:Precision Machining Level I (Intermediate) Certificate Total Credits: 25
Precision Machining (Advanced) Certificate Total Credits: 52Computer Aided Machining Certificate Total Credits: 12Precision and Computer Aided Machining Certificate Total Credits: 61Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12-13Dates Time Days RM Inst
/5-5/23 7:50-10:40A MTRF B155 Townsend, M& 8:50-11:00A W
/5-5/23 12:05-2:55P MTRF B155 Townsend, M& 12:45-2:55P W
/5-5/23 5:00-10:00P MTWR B155 Oliver R
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
Programs
-
8/3/2019 Spring Schedule 2012
20/2220 Spring Schedule 2012
PROFESSIONAL PHOTOGRAPHY*The Professional Photography certificate provides students with the skills to become a professional freelance photographer or photographers assistant.This two semester program includes the fundamentals of exposure theory through basic studio portraiture and a professional portfolio.
Explore the creative and rewarding possibilities in professional photographyDevelop skills in traditional and digital photography, and studio and location lighting
Create a professional portfolio using advanced image editing equipment and software
Career Focus: Prepare for immediate employment or further education
College Credit Certifications Scholarships
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
PROPERTY MAINTENANCE TECHNICIAN
Perform inspection, preventative maintenance, and repairs on residential and commercial propertiesService major appliances and work in carpentry, plumbing, electrical, and HVAC to provide basic ongoing maintenanceMaintain a propertys exterior and interior such as floors, walls, paint, window treatments, lighting, ceiling, and exhaust fans
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
The following certificate may be earned:Property Maintenance Certificate Total Credits: 12
Spring Semester Total Credits: 12Dates Time Days RM Inst
/5-5/23 7:50-10:40A MTRF B175 Spaar, S& 8:50-11:00A W
/5-5/23 12:05-2:55P MTRF B175 Spaar, S& 12:45-2:55P W
dditional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
RESPIRATORY CARE*Assess patients condition and implement treatment protocol to arrive at the best outcome for the patientWork with advanced respiratory care equipment to accelerate patients recoveryExperience rigorous curriculum with relevant clinical instruction in a variety of healthcare settings
Career Focus: Prepared for professional certification credential, immediate employment, and further education
College Credit Certifications Credentials Clinicals
This program will be offered Fall 2012, Please check out website at www.pickenstech.org or call (303)344-4910 for more information*
Programs
-
8/3/2019 Spring Schedule 2012
21/2221 Spring Schedule 2012
VETERINARY ASSISTANT
Explore the science of veterinary medicine including animal care/control, grooming, clinical terminology, and disease preventionParticipate in the care, nutrition, and handling of small animals and exotic petsDevelop office management and support skills while providing excellent customer service
Career Focus: Prepared for immediate employment, advanced certifications, and further educationCollege Credit Certifications
The following certificates may be earned:Small Animal Assistant Certificate Total Credits: 12Veterinary Assistant Certificate Total Credits: 25Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 11Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF C101 Schiraldi C
& 8:50-11:00A W1/5-5/23 12:05-2:55P MTRF C101 Schiraldi C
& 12:45-2:55P W
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites.
WELDING
Use advanced welding techniques to fabricate unique manufacturing solutionsRead and interpret blueprints for structural and pipe weldingUse advanced tools and equipment in a safety-conscious environment
Career Focus: Prepared for immediate employment and further education
College Credit Certifications Scholarships
Students will be required to purchase and maintain Leathers, safety glasses, books, leather gloves and boots.
The following certificates may be earned:Basic Industrial Welding Certificate Total Credits: 15SMAW Structural Welding Certificate Total Credits: 14Semi-Automatic Welding Certificate Total Credits: 12AWS Entry-Level Welder Certificate Total Credits: 12Advance Welder Certificate Total Credits: 24Basic/SMAW/Semi-Automatic Welding Certificate Total Credits: 41Basic/AWS Entry-Level/Advanced Welder Certificate Total Credits: 51Please call our counseling office at (303)344-4910 for more information on these certificates.
Spring Semester Total Credits: 12-13Dates Time Days RM Inst1/5-5/23 7:50-10:40A MTRF A73 Oliver J
& 8:50-11:00A W
1/5-5/23 12:05-2:55P MTRF A73 Oliver J& 12:45-2:55P W1/5-5/23 5:00-9:30P MTWR A73 Wright M
Additional fees may apply, please contact our Advising Department (303)344-4910, ext 27909 or ext 27935
Please visit www.pickenstech.org to view our catalog online for course descriptions and prerequisites
-
8/3/2019 Spring Schedule 2012
22/22
Evening offerings are subject to change. Please call Pickens Technical College at(303)344-4910 to get the most current information regarding classes offered, dates, times, etc.
Evening Programs
Expanded Duty Dental Assisting
This course is offered in theeveningforDental Assistants seeking further training
Availability is dependent upon enrollment
Please call (303)344-4910, ext 27757for more information
A comprehensive course to expandyour skills and increase your earning potential.
This course provides didactic and laboratoryexperience in packing, carving, finishing, andpolishing of Class I, II, and V amalgams,Class III, IV, and V tooth colored restorations.Operative procedures include placement of
bases, liners and preparation and placementof matrices and wedges. Laboratory exercisesinvolve the use of typodonts and preparedteeth that are utilized in restorativeprocedures. Use of principles of four-handeddentistry and time utilization are an integralpart of fulfilling requirements leading towardproficiency in restorative procedures.
Cosmetology Barber HairstylistMTWR
5:00pm-10:00pm
1/5-5/23
Nurse Aide
January 9- March 7MTW5:00-9:00PM
OR
March 13 - May 15MTW
5:00-9:00PM
5 credits (IncludesClinicals)
Precision and
Computer Aided Machining
MW5:00pm-10:00pm1/5-5/2312-13 Credits
Welding
5:00pm-9:30pmMTWR1/5-5/23