Specifications BLITZ Basic Laser Proectors · Specifications BLITZ Basic Laser Proectors Released...
Transcript of Specifications BLITZ Basic Laser Proectors · Specifications BLITZ Basic Laser Proectors Released...
Specifications BLITZ Basic Laser Projectors 1Released on 30/11/2017
Crellestr. 19-20 I D-10827 Berlin I P +49(30)780 963-0 I F +49(30)780 963-25
Technical specifications subject to change without prior notice!
Single color laser projector predominantly based on a green Genesis TAIPAN OPSL. For applications with single-colored green laser light the BLITZ Basic laser units are still proven products which feature by their top-grade quality as well as good price-performance ratio.
Laser Source Type: CW analog modulated
Typical Wavelengths 532 nm
Beam Diameter (1/e²) typical *: 1.8 mm (< 3 mm with LD optics)
Beam Divergence (1/e²) typical *: < 1.4 mrad (< 0.7 mrad with LD optics)
Laser class: 4 * Specification by Coherent Inc.
BLITZ Specific Output Power [mW]Basic G2 PD1) 1600
Basic G5 5000Basic G8 8000Basic G10 10,000
Basic dual G16 16,000Basic dual G20 20,000
1) Pure Diode - 520 nm green diode module made by LaserAnimation
Specifications BLITZ Basic Laser Projectors 2Released on 30/11/2017
Crellestr. 19-20 I D-10827 Berlin I P +49(30)780 963-0 I F +49(30)780 963-25
Technical specifications subject to change without prior notice!
Scanner Unit X,Y scanner CT 6210H (Cambridge Technology) with Turbo Scan driver (LaserAni-mation Technology)• Scan system speed: 40 k ILDA 8°• Aperture: 4 mm• Projection angle: 80° maximum, 50° typical• Reaction time (2° opt. step): 0.2 ms
Control
ElectricalInput
Standardized Connectors
Thermal • Max. ambient tempearture: 60°C• Min. ambient temperature: - 10°C
ClimateComponents
• Generously dimensioned heat sink as base for all temperature relevant components• Peltier elements forh either heating and cooling• Temperature controlled low noise fans with high efficiency
• Grating module for extraordinary background effects• Laser show controller Lasergraph DSP PCB • LD optics for low divergence• Wide angle lense (fisheye) for mounting to the laser output
Laser Safety • Scanfail safety circuit• Physical adjustable beam block• Key switch, interlock loop, emission LED
• AC Mains Connector: 3-pin IEC socket male• Projector Signal, analog: ILDA In D-sub 25, differential inputs• Remote: 7pin XLR (RS232, external key switch, interlock) • DMX In: 5pin XLR
• 100-120 VAC / 200-240 VAC / 50-60 Hz• Input power range: 120 -750 W maximum
• Using “LA Toolbox“ software (included) for installation on PC or Mac
Built-In Options
CE, CDRH Compliance
12 months after deliveryWarranty
Specifications BLITZ Basic Laser Projectors 3Released on 30/11/2017
Crellestr. 19-20 I D-10827 Berlin I P +49(30)780 963-0 I F +49(30)780 963-25
Technical specifications subject to change without prior notice!
• Length: 340 mm• Width: 245 mm• Height: 210 mm (without yoke)• Weight: Range of approx. 9 kg to 17 kg (depending on model)• Housing: Powder coated steel plate black, dustproof • Degree of protection: IP54
Physical
Dimensions Yoke
Specifications BLITZ Basic Laser Projectors 4Released on 30/11/2017
Crellestr. 19-20 I D-10827 Berlin I P +49(30)780 963-0 I F +49(30)780 963-25
Technical specifications subject to change without prior notice!
Package
CE, CDRHCompliance
12 months after deliveryWarranty
Type Picture Dimensions [cm]
StandardAlu case 80 l
external: 69 x 45,5 x 32internal: 66.8 x 42.8 x 28.5weight: 5 kg
Optional
bwh Casys Box No. 2
external: 60.5 x 44.5 x 43.5internal: 51 x 36 x 26.5weight: 5.2 kg
Peli Case 1620
external: 63 x 49,2 x 35,2internal: 54.3 x 41.4 x 31.9weight: 11.1