SPECIALISED STUD SYSTEMS PTY LTD · SPECIALISED STUD SYSTEMS PTY LTD ADDRESS 150-156 Woodpark Rd,...
Transcript of SPECIALISED STUD SYSTEMS PTY LTD · SPECIALISED STUD SYSTEMS PTY LTD ADDRESS 150-156 Woodpark Rd,...
TM
2017 PRODUCT CATALOGUE
1300 88 FASTSPECIALISED STUD SYSTEMS PTY LTD
www.faststud.com.au ADDRESS 150-156 Woodpark Rd, Smithfield NSW 2164
POST PO Box 5291, Greystanes NSW 2145PHONE 1300 88 3278 (1300 88 FAST) FAX (02) 9609 7813
EMAIL [email protected]
Pricing effective April 2017 VERSION 4
QUALITY | SPEED | EXPERIENCE
TM
FASTSTUD IS A PROUD DISTRIBUTOR OF THE FOLLOWING PRODUCTS:
Specialised Stud Systems Pty Ltd (T/A as Faststud) was established in 1996 to supply the construction industry with quality roll formed steel building
products and has gained a wealth of experience as a specialist in this field.
The organisation revolves around customer needs, and Faststud is dedicated to offering quality products with fast, reliable and personalised
service, backed up by technical and engineering expertise.
We are committed to fulfilling the most challenging of customer requirements and we are constantly seeking to introduce and implement
innovative, viable systems for the construction industry.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. E&OE
© 2017 Specialised Stud Systems Pty Ltd.Copyright laws cover the contents of this product catalogue. Reproduction of all or part without the written permission from Specialised Stud Systems is prohibited. Whilst every care has been taken in the collation of this document, Specialised Stud Systems Pty Ltd accepts no liability for the accuracy of the information supplied. Specialised Stud Systems Pty Ltd. expressly disclaims all and any liability to any person whether a purchaser of any product details of which are set out in this catalogue, or otherwise in respect of anything done or omitted to be done and the consequences of anything done or omitted to be done, by any such person in reliance, whether in virtue in whole or in part upon the whole or part of the within information.
Pricing Effective 1st April 2017 Page 3 Version: 4.0
Quality Assurance / Warranty
WARRANTY
Refer to Terms and Conditions of sale at the back of this catalogue.
Note that mixing of different manufacturers’ products within a ceiling or wall system will void any warranty.
QUALITY ASSURANCE
Faststud is the major NSW Distributor for Studco Building Systems.
As such the majority of steel products listed are supplied by Studco.
Studco is a Quality Assured Company.
Pricing Effective 1st April 2017 Page 4 Version: 4.0
Marketing & Pricing Policy
FREIGHT
Freight charges available on application.
BACK ORDERS
Sydney Metropolitan area
No delivery charge on backorders for standard stock items. Standard delivery charge will apply to non standard products and special orders.
Outside Sydney Metropolitan area
Delivery charges will apply on backorders for both standard and non standard products. Order early to avoid these charges.
RE-DELIVERIES
If goods have to be returned to store for re-delivery due to the customer not meeting delivery related obligations made at the time of order, the customer will be charged for:
the cartage of the original delivery,
the cartage for return to store
and the later re-delivery.
SPECIAL ORDERS
Special size products e.g. Studs, Furring Channels, etc. are available from FASTSTUD provided that the minimum quantity is a stock pack size for the product concerned.
A purchase order is required before manufacture will commence.
All special orders will be billed within 30 days of date ready for despatch. Storage fees may apply if goods are not picked up or delivered within the 30 day period.
Special orders will be billed if the order is cancelled. Restocking is not an option.
PACKAGING
With few exceptions, FASTSTUD products are packed in workable quantities of stock packs and sub packs.
In such cases, minimum quantities sold are limited to sub packs.
GOODS & SERVICES TAX
FASTSTUD is registered for GST. All prices in this book exclude GST.
TIMEFRAME AND CONDITION ON RETURNS
A handling, restocking and administration charge will apply to all returned items.
If goods are picked up by Faststud, return freight will be charged.
If returned items require cleaning when they reach the yard an additional charge will apply.
03- Quality Assurance / Warranty
04 - Marketing and Pricing Policy
44 - MDF Stop Ends, Tapes, Plasterboard Compounds
45 - Sealants and Adhesives
46 - Abrasives, Hand Tools
47 - Cart for Plasterboard/Hebel/AAC
47 - Safety Gear
CONTENTS
20 - Top Hat Ceiling and Roof Battens
21 - Top Hat Battens
22 - Top Hat Junction Studs
23 - Accessories
24 - C and Z Purlins 59 - Thermal Wall & Ceiling Batts, Acoustic / Thermal Batts, Sound Blanket,
Ceiling Baffle
48 - Collapsible Scaffold and Miscellaneous Components
49 - Framing Screws, Plasterboard Screws - Loose & Collated
50 - Fibre Cement Screws - Loose & Collated, Roofing Screws, Extended Drill
Point Screws (Series 500)
51 - Ceiling Suspension Anchors, Booker Rod, Bolts, Nuts and Washers,
Staples, Masonry Sleeve Anchors
52 - Metal Pin Anchors, Nail in Plugs & Wall Plugs, Rivets, Drill Bits
53 - Phillips & Hex Bits, Cut Off & Grinding Wheels
54 - Ramset TrakfastTM and TrackmasterTM
65 - Safety Data Sheets
66 - Terms and Conditions of Sale
55 - Metal Sections for Hebel Systems, Hebel Fasteners
56 - Partition Batts
57 - Thermal Wall and Ceiling Batts, Soundbreak
58 - Permastop Building Blanket, Fire Rated Insulation
63- Kooltherm and Air-Cell
64 - Sarking
42 - MDF Non Rated & Sound Rated
43 - METAL - Non Rated & Sound Rated
43 - Fire Rated
43 - Tile and Spa Panels
43 - Aluminium Manhole Frames
05 - Stud & Track 0.50 - 0.55 BMT
06- Stud & Track 0.75 BMT
07 - Stud & Track 1.15 BMT
07 - Slotted Deflection Track , Stud & Track 1.50 BMT
08 - HEDA Jamb Studs
09 - Noggings, Nogging Tracks, Shaftwall System
10 - Nogging Bracket, Curved Track, Flexible Track for Curved Walls & Bulkheads
11 - Stud Wall Accessories: Brackets, Brace Strapping & Staggered Stud Clips
12 - Stud Wall Accessories: Gal Mesh, Backing Strips & Tools, Structural
13 - Concealed Ceiling Systems
16- SlimceilTM
- Low Clearence Ceiling Systems
17 - Exposed Grid Ceiling System
18 - Ceiling Tiles
31 - Plasterboard Metal Accessories -External and Internal Angles, Shadowline Angles
32 - Arch Beads, Stopping Beads, Expansion Joints, Backing Angles
33 - PVC Finishing Sections
34 - EZY Finishing Sections: EZY CapTM, EZY RevealTM, Fastcap® and Cavkit®
37 - EZY Jamb®
39 - Skirting and Flat Bar
40 - Aluminium Partition Sections
19 - Resilmounts, Acoustic Brackets, Wave Bar - Flexible Noise Barrier
STEEL STUD WALL SYSTEMS 05
CEILING SYSTEMS 13
TOP HATS & PURLINS 20
FIBRE CEMENT 25
PLASTERBOARD 29
PLASTERBOARD FINISHING SECTIONS 31
METAL DOOR FRAMES 36
ALUMINIUM SECTIONS 39
ACCESS PANELS 42
SOUND ISOLATION SYSTEMS 19
PLASTERING ACCESSORIES & TOOLS 44
LADDERS & PLATFORMS 48
FASTENERS 49
HEBEL/AAC ACCESSORIES 55
GLASSWOOL INSULATION 56
POLYESTER INSULATION 59
EARTHWOOL INSULATION 60
POLASTIC INSULATION 61
INSULATION FIXINGS 62
REFLECTIVE INSULATION 63
APPENDIX 65
INTRODUCTION 01
Page 2 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
51SS24 * Stud 51mm 2400 100 10 11.37 4.74 1.300
51SS27 * 2700 100 10 12.85 4.76 1.460
51SS30 3000 100 10 14.23 4.74 1.630
51SS36 3600 100 10 17.12 4.76 1.950
64SS24 Stud 64mm 2400 100 10 9.93 4.14 1.430
64SS27 2700 100 10 11.14 4.13 1.610
64SS30 3000 100 10 12.38 4.13 1.790
64SS33 * 3300 100 10 13.62 4.13 1.970
64SS36 3600 100 10 14.86 4.13 2.150
64SS42 4200 100 10 17.33 4.13 2.500
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
76SS24 Stud 76mm 2400 100 10 12.65 5.27 1.710
76SS27 2700 100 10 14.23 5.27 1.950
76SS30 3000 100 10 15.80 5.27 2.170
76SS33 * 3300 100 10 17.38 5.27 2.350
76SS36 3600 100 10 18.96 5.27 2.610
76SS42 4200 100 10 22.14 5.27 3.040
76SS48 4800 100 10 25.28 5.27 3.410
76SS60 * 6000 100 10 31.59 5.27 4.270
92SS24 Stud 92mm 2400 100 10 14.53 6.05 1.910
92SS27 2700 100 10 16.33 6.05 2.150
92SS30 3000 100 10 18.16 6.05 2.390
92SS33 * 3300 100 10 19.97 6.05 2.630
92SS36 3600 100 10 21.78 6.05 2.870
92SS42 4200 100 10 25.41 6.05 3.350
92SS48 4800 100 10 29.06 6.05 3.830
92SS60 6000 100 10 36.29 6.05 4.780
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
51ST30 Track 51mm x 32mm with safety hem 3000 100 10 12.25 4.08 1.440
64ST30 Track 64mm x 28mm with safety hem 3000 100 10 11.93 3.98 1.600
76ST30 Track 76mm x 28mm with safety hem 3000 100 10 13.18 4.39 1.920
92ST30 Track 92mm x 28mm with safety hem 3000 100 10 15.72 5.24 2.130
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64SDHT30 DHT 64mm x 50mm with safety hem 3000 100 10 20.02 6.67 2.310
76SDHT30 DHT 76mm x 50mm with safety hem 3000 100 10 21.19 7.06 2.480
92SDHT30 DHT 92mm x 50mm with safety hem 3000 100 10 23.04 7.68 2.720
STEEL STUD WALL SYSTEMSWALL STUD 0.50 BMT
WALL STUD 0.55 BMT
TOP & BOTTOM TRACK 0.50 BMT
DEFLECTION HEAD TRACK 0.50 BMT
Wall Track Deflection Track Wall Stud
* Denotes lead times and minimum order quantity may apply Page 5 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
51HS27 * Stud 51mm Load Bearing 2700 100 10 17.97 6.66 2.110
51HS30 * 3000 100 10 19.94 6.65 2.340
64HS24 * Stud 64mm Load Bearing 2400 100 10 18.08 7.53 2.140
64HS27 * 2700 100 10 20.35 7.54 2.410
64HS30 3000 100 10 22.60 7.53 2.670
64HS36 3600 100 10 27.14 7.54 3.210
64HS42 * 4200 100 10 31.64 7.53 3.740
64HS48 4800 100 10 36.15 7.53 4.280
64HS60 * 6000 100 10 45.20 7.53 5.350
76HS24 Stud 76mm Load Bearing 2400 100 10 19.57 8.15 2.330
76HS27 2700 100 10 22.02 8.16 2.610
76HS30 3000 100 10 24.46 8.15 2.900
76HS36 3600 100 10 29.37 8.16 3.480
76HS42 * 4200 100 10 34.25 8.15 4.050
76HS48 4800 100 10 39.16 8.16 4.630
76HS60 6000 100 10 48.93 8.16 5.800
92HS24 * Stud 92mm Load Bearing 2400 100 10 21.44 8.93 2.550
92HS27 2700 100 10 24.13 8.94 2.870
92HS30 3000 100 10 26.80 8.93 3.190
92HS36 3600 100 10 32.17 8.94 3.830
92HS42 4200 100 10 37.52 8.93 4.470
92HS48 4800 100 10 42.89 8.94 5.110
92HS60 6000 100 10 53.60 8.93 6.390
150HS36 * Stud 150mm Load Bearing 3600 100 10 55.07 15.30 4.980
150HS42 * 4200 100 10 64.25 15.30 5.810
150HS48 4800 100 10 73.42 15.30 6.640
150HS60 6000 100 10 91.77 15.30 8.290
150HS72 7200 100 10 110.12 15.29 9.950
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
51HT30 * Track 51mm x 32mm with safety hem 3000 100 10 18.45 6.15 2.110
64HT30 Track 64mm x 28mm with safety hem 3000 100 10 20.95 6.98 2.340
76HT30 * Track 76mm x 28mm with safety hem 3000 100 10 22.16 7.39 2.570
92HT30 Track 92mm x 28mm with safety hem 3000 100 10 24.76 8.25 2.860
150HT30 Track 150mm x 32mm with safety hem - 0.75BMT 3000 100 10 37.25 12.42 3.990
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
51HDHT30 * DHT 51mm x 50mm with safety hem 3000 100 10 20.67 6.89 2.800
64HDHT30 DHT 64mm x 48mm with safety hem 3000 100 10 23.80 7.93 3.020
76HDHT30 DHT 76mm x 48mm with safety hem 3000 50 10 25.13 8.38 3.210
92HDHT30 DHT 92mm x 48mm with safety hem 3000 100 10 27.51 9.17 3.540
150HDHT30 DHT 150mm x 50mm with safety hem - 0.75BMT 3000 100 10 40.90 13.63 4.640
WALL STUD 0.75 BMT
TOP & BOTTOM TRACK 0.70/0.75 BMT
DEFLECTION HEAD TRACK 0.70/0.75 BMT
Wall Track Deflection Track Wall Stud
* Denotes lead times and minimum order quantity may apply Page 6 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64XHS27 * Stud 64mm Load Bearing 2700 100 10 26.23 9.71 3.390
64XHS30 3000 100 10 29.15 9.72 3.790
64XHS36 3600 100 10 34.96 9.71 4.520
64XHS42 4200 100 10 40.82 9.72 5.280
64XHS48 * 4800 100 10 46.64 9.72 6.030
64XHS60 6000 100 10 58.28 9.71 7.580
76XHS24 * Stud 76mm Load Bearing 2400 100 10 25.12 10.47 3.300
76XHS27 2700 100 10 28.24 10.46 3.710
76XHS30 3000 100 10 31.39 10.46 4.130
76XHS36 3600 100 10 37.64 10.46 4.950
76XHS42 * 4200 100 10 43.91 10.45 5.780
76XHS48 4800 100 10 50.19 10.46 6.600
76XHS60 6000 100 10 62.73 10.46 8.250
92XHS27 Stud 92mm Load Bearing 2700 100 10 31.10 11.52 4.110
92XHS30 3000 100 10 34.55 11.52 4.570
92XHS36 3600 100 10 41.45 11.51 5.480
92XHS42 4200 100 10 48.36 11.51 6.400
92XHS48 4800 100 10 55.26 11.51 7.310
92XHS60 6000 100 10 69.06 11.51 9.140
92XHS72 7200 100 10 82.88 11.51 10.970
150XHS36 * Stud 150mm Load Bearing 3600 100 10 83.90 23.31 7.430
150XHS42 4200 100 10 97.89 23.31 8.670
150XHS48 4800 100 10 111.84 23.30 9.910
150XHS60 6000 100 10 139.83 23.31 12.380
150XHS72 7200 100 10 167.89 23.32 14.860
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64XHT30 * Track 64mm x 32mm 3000 100 10 24.74 8.25 7.373
76XHT30 Track 76mm x 32mm 3000 100 10 27.14 9.05 8.087
92XHT30 Track 92mm x 32mm 3000 100 10 30.27 10.09 9.013
150XHT30 Track 150mm x 32mm 3000 100 10 67.26 22.42 20.047
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64XHDHT30 DHT 64mm x 50mm 3000 100 10 43.05 14.35 4.570
76XHDHT30 DHT 76mm x 50mm 3000 100 10 46.14 15.38 4.980
92XHDHT30 DHT 92mm x 50mm 3000 100 10 50.08 16.69 5.370
150XHDHT30 DHT 150mm x 50mm 3000 100 10 70.44 23.48 6.990
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64HDHT30S * Slotted DHT 64mm x 0.75 3000 100 10 P.O.A. - -
76HDHT30S * Slotted DHT 76mm x 0.75 3000 100 10 P.O.A. - -
92HDHT30S * Slotted DHT 92mm x 0.75 3000 100 10 P.O.A. - -
76XHDHT30S * Slotted DHT 76mm x 1.15 3000 100 10 P.O.A. - -
92XHDHT30S Slotted DHT 92mm x 1.15 3000 100 10 P.O.A. - -
150XHDHT30S * Slotted DHT 150mm x 1.15 3000 100 10 P.O.A. - -
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
92XXHT30 * HEAVY DUTY TRACK 92mm x 1.50 BMT 3000 100 10 P.O.A - 5.700
92XXHS72 * HEAVY DUTY STUD 92mm x 1.50 BMT 3000 100 10 P.O.A - 15.260
DEFLECTION HEAD TRACK 1.15 BMT
STEEL STUD WALL SYSTEM 1.50 BMT
SLOTTED DEFLECTION HEAD TRACK
WALL STUD 1.15 BMT
TOP & BOTTOM TRACK 1.15 BMT
Wall Track Deflection Track Wall Stud Slotted Deflection Track
* Denotes lead times and minimum order quantity may apply Page 7 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
HJ9263150-27 * HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 2700 2700 50 1 P.O.A - 7.920
HJ9263150-285 HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 2850 2850 50 1 P.O.A - 8.350
HJ9263150-30 * HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 3000 3000 50 1 P.O.A - 8.800
HJ9263150-36 * HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 3600 3600 50 1 P.O.A - 10.550
HJ9263150-48 * HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 4800 4800 50 1 P.O.A - 11.560
HJ15063115-30 * HEDAJAMB63 150mm x 63mm x 16 x 1.15 BMT x 3000 3000 50 1 P.O.A - 9.030
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
HJ9289155-2850 * HEDAJAMB90 92mm x 89mm x 25 x 1.55 BMT x 2850 2850 50 1 P.O.A - 9.430
HJ9289155-36 * HEDAJAMB90 92mm x 89mm x 25 x 1.55 BMT x 3600 3600 50 1 P.O.A - 11.920
HJ9289155-48 * HEDAJAMB90 92mm x 89mm x 25 x 1.55 BMT x 4800 4800 50 1 P.O.A - 15.890
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M104 Slotted HEDA Connection bracket (2mm BMT) 100 1 8.41 - 0.190
HEDA Jamb 90
Accessories
HEDA Jamb 63
HEDA Jamb63 HEDA Jamb90
TIME SAVING *No need for boxed studs at internal opening or doorways. *No need for boxed or back-to-back studs in wall designs. No need for complex lintel
arrangements. COST SAVING *Replace some structural sections with HEDA Jamb. *Fewer Noggins required in HEDA Jamb walls. *Achieve huge spans not possible with conventional studs.
* Denotes lead times and minimum order quantity may apply Page 8 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64HN45 Single Nogging 64mm @ 450 centres 450 10 10 5.66 - 0.350
64HN60 Single Nogging 64mm @ 600 centres 600 10 10 6.14 - 0.470
76HN45 Single Nogging 76mm @ 450 centres 450 10 10 5.14 - 0.390
76HN60 Single Nogging 76mm @ 600 centres 600 10 10 6.53 - 0.510
92HN45 Single Nogging 92mm @ 450 centres 450 10 10 5.66 - 0.430
92HN60 Single Nogging 92mm @ 600 centres 600 10 10 7.91 - 0.570
150HN45 Single Nogging 150mm @ 450 centres 450 10 10 12.20 - 0.600
150HN60 Single Nogging 150mm @ 600 centres 600 10 10 13.15 - 0.800
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
64NT45 Nogging Track 64mm @ 450 centres x 3.6 3600 100 10 34.01 9.45 2.860
64NT60 Nogging Track 64mm @ 600 centres x 3.6 3600 100 10 33.68 9.36 2.860
76NT45 Nogging Track 76mm @ 450 centres x 3.6 3600 100 10 36.00 10.00 3.150
76NT60 Nogging Track 76mm @ 600 centres x 3.6 3600 100 10 35.62 9.89 3.150
92NT45 Nogging Track 92mm @ 450 centres x 3.6 3600 100 10 37.82 10.51 3.340
92NT60 Nogging Track 92mm @ 600 centres x 3.6 3600 100 10 37.45 10.40 3.340
150NT45 Nogging Track 150mm @ 450 centres x 3.6 3600 100 10 53.74 14.93 4.860
150NT60 Nogging Track 150mm @ 600 centres x 3.6 3600 100 10 53.43 14.84 4.860
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
SWC64-530 * 64mm CH STUD 0.55BMT x 3.0m 3000 50 50 P.O.A - 2.758
SWC64-536 * 64mm CH STUD 0.55BMT x 3.6m 3600 50 50 P.O.A - 3.310
SWC64-945 * 64mm CH STUD 0.90BMT x 4.5m 4500 50 50 P.O.A - 6.629
SWE64-530 * 64mm E STUD 0.55BMT x 3.0m 3000 100 100 P.O.A - 1.995
SWE64-536 * 64mm E STUD 0.55BMT x 3.6m 3600 100 100 P.O.A - 2.394
SWTJ64-30 * 64mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A - 2.882
SWTD64-30 * 64mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A - 3.692
SWC102-536 * 102mm CH STUD 0.55BMT x 3.6m 3600 50 50 P.O.A - 3.961
SWC102-543 * 102mm CH STUD 0.55BMT x 4.3m 4300 50 50 P.O.A - 4.731
SWC102-955 * 102mm CH STUD 0.90BMT x 5.5m 5500 50 50 P.O.A - 9.641
SWE102-536 * 102mm E STUD 0.55BMT x 3.6m 3600 100 100 P.O.A - 3.167
SWE102-543 * 102mm E STUD 0.55BMT x 4.3m 4300 100 100 P.O.A - 3.783
SWTJ102-30 * 102mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A - 3.632
SWTD102-30 * 102mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A - 4.442
Double punched noggings available upon request to suit back-to-back studs or HEDA sections.
Double punched noggings tracks available upon request to suit back-to-back studs or HEDA sections.
SINGLE NOGGINGS 0.70/0.75 BMT
NOGGING TRACK 0.70/0.75 BMT
SHAFTWALL SYSTEM
Nogging Track Nogging E-STUD
C-H-STUD
* Denotes lead times and minimum order quantity may apply Page 9 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M68 * Nogging Bracket 36mm x 70mm long-INTERMEDIATE 70 50 1 P.O.A - 0.078
M69 * Nogging Bracket 36mm x 70mm long-END 70 50 1 P.O.A - 0.042
M78 * Nogging Bracket 18mm x 150mm long-INTERMEDIATE 150 50 1 P.O.A - 0.132
M79 * Nogging Bracket 18mm x150mm long-END 150 50 1 P.O.A - 0.070
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
CURVED TRACK-0.55 BMT
CT51S * 51mm x 32mm x 0.55BMT 3000 - 1 P.O.A - 1.440
CT64S * 64mm x 28mm x 0.55BMT 3000 - 1 P.O.A - 1.590
CT76S * 76mm x 28mm x 0.55BMT 3000 - 1 P.O.A - 1.920
CT92S * 92mm x 28mm x 0.55BMT 3000 - 1 P.O.A - 2.150
Curved Track & Curved Deflection Head Track are available in all sizes and material gauges.
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
FLEXIBLE TRACK FOR CURVED WALLS & BULKHEADS (with side reinforcement)
FL-51-30 * 51mm x 32 x 0.50 BMT Flexible Track (No Side Reinforcement) 3000 50 1 P.O.A - 2.050
FLEXC64 * 64mm x 30 x 0.80 BMT Flexible Track 3000 50 1 P.O.A - 2.070
FLEXC76 * 76mm x 30 x 0.80 BMT Flexible Track 3000 50 1 P.O.A - 2.080
FLEXC92 * 92mm x 30 x 0.80 BMT Flexible Track 3000 50 1 P.O.A - 2.120
FL-150-30 * 150mm x 50 x 0.50 BMT Flex. Defl. Head Track (no side reinforcement) 3000 50 1 P.O.A - 2.536
NOGGING BRACKETS
CURVED TRACK
FLEXIBLE TRACK
Curved Track
Flexible Track
M78
18mm
M79 M68 M69
M78 & M79 nogging brackets are designed to suit 18mm plywood.
M68 & M69 nogging brackets are designed to suit standard 35mm timber stud noggings.
Studco Nogging Bracket System makes installing timber noggings - of virtually any shape or size - into a steel stud wall a breeze. The bracket system is supplied ready to install, with pre-punched holes and cut to length, saving considerable time on site.
36mm 18mm
* Denotes lead times and minimum order quantity may apply Page 10 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. m PACK PACK EACH $ l/m kg/piece
M100 Framing L Bracket 100 x 45 x 40 wide (1.5mm BMT) - 100 1 3.33 - 0.087
M104 Slotted HEDA Connection bracket (2mm BMT) - Suits HJ - 100 1 8.41 - 1.140
M105 Slotted Connection bracket (1.9mm BMT)-suits 92 stud - 100 1 8.39 - 0.100
M545 Universal Framing Bracket 75 x 75 x 55 wide (1.5mm BMT) - 100 1 3.55 - 0.090
BRFL75-3 * Framing L Bracket 75 x 75 x 3BMT - 100 1 11.90 - 0.250
SSH-M10-25 * Set Screw (BOLT) M10 x 25mm ZP Hex Head - for framing brackets - Box 150 39.42 - 0.000
W1024 * Washer 10 X 24 Zinc Plated - for framing brackets - Box 100 9.66 - 0.492
N-M10 * Nut M10 Zinc Plated - for framing brackets - Box 100 8.73 - 0.930
STRAP25830 Tension Brace Strapping Coil Z275 24mm x 0.8 x 30m 30m - 1 33.60 1.12 4.100
STRAP25850 * Tension Brace Strapping Coil Z275 24mm x 0.8 x 50m 50m - 1 55.65 1.11 7.100
STRAPT100 * Brace Strapping Tensioner Box of 100 - - 100 148.39 - 4.540
STRAPT6 Brace Strapping Tensioner Pack of 6 - - 6 12.85 - 0.000
RM126 * Staggered stud clip - 100 100 1.53 - 0.020
RM127 * Staggered stud clip - Box type for 64mm stud in 92mm track - 50 50 P.O.A - 0.070
ACCESSORIES FOR STUD WALLS
M105 M100 M545
STRAP25830 RM126 RM127 STRAPT
SSH-M10-25
N-M10
W1024
Call Faststud today to arrange a copy of the STUDCO
"Wall & Ceiling Design & Installation Manual".
Full of handy tips and ideas to get the job done properly. From span tables to acoustic design guides.
We've got you covered.
M104
* Denotes lead times and minimum order quantity may apply Page 11 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part SUB PRICE Approx Approx
No. PACK EACH $ l/m kg/piece
PATLSCI * Stud Crimper-short handle 1 P.O.A - 0.590
PATLSP * Stud Punch - Punches a 34mm service hole in studs. 1 P.O.A - 2.784
PATLSPG1 * Stud Punch Insert- Easy Snap in Grommet-Pack 100 (working hole diameter 30mm) 100 P.O.A - 0.816
PATLTSG * Aviation Tin Snips - Right Cut - GREEN 1 P.O.A - 0.432
PATLTSR * Aviation Tin Snips - Left Cut - RED 1 P.O.A - 0.432
PATLTSY Aviation Tin Snips - Straigh Cut - YELLOW 1 P.O.A - 0.432
Part STOCK SUB PRICE Length Approx
No. PACK PACK EACH mm kg/piece
BSCB050-30 Black Colorbond Backing Strip 50mm 5 5 P.O.A 3000 6.040
BSCB100-30 Black Colorbond Backing Strip 100mm 5 5 P.O.A 3000 12.080
Part SUB PRICE Approx Approx
No. PACK EACH $ l/m kg/piece
GS1224-055 Galvabond Sheet 1220 x 2440 0.55 BMT 1 P.O.A - 13.700
GS1224-080 * Galvabond Sheet 1220 x 2440 0.80 BMT 1 P.O.A - 19.610
GS1224-110 * Galvabond Sheet 1220 x 2440 1.10 BMT 1 P.O.A - 27.030
EM5020F * Expanded Mesh Flattened 1200 x 2400 x 2mm (opening size 87 x 43) - Black 1 P.O.A - 7.200
EM5020FG * Expanded Mesh Flattened 1200 x 2400 x 2mm (opening size 87 x 43) - Galvanised 1 P.O.A - 7.200
Part SUB PRICE Approx Approx
No. PACK EACH $ l/m kg/piece
M110 StrongArm Wall Brace - 1200mm x 300mm 1 P.O.A - 10.200
Posts * Steel Posts (SHS, RHS, Galvanised, Black, Powder Coated, Painted,etc..) 1 P.O.A - -
Lintels & Sills * Structural Lintels & Sills 1 P.O.A - -
Angles & Brackets * Various size angles and brackets (Custom Length, sizes and coatings 1 P.O.A - -
GAL & MESH SHEETS
ACCESSORIES FOR STUD WALLS
BACKING STRIPS
STRUCTURAL
MADE TO ORDER:
Galvabond Sheet
Gal Sheet & Expanded Mesh Sheets are ideal for security wall applications
Expanded Mesh
PATLSCI
PATLTSY PATLSP
PATLSPG1
* Denotes lead times and minimum order quantity may apply Page 12 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M27-36 Top Cross Rail 25mm x 0.75BMT 3600 200 10 16.68 4.63 1.900
M27-48 Top Cross Rail 25mm x 0.75BMT 4800 200 10 22.23 4.63 2.540
M27-60 Top Cross Rail 25mm x 0.75BMT 6000 200 10 27.81 4.64 2.540
M27R-36 * Top Cross Rail 25mm x 0.75BMT - Curved to your specified radius 3600 1 1 54.73 15.20 1.900
M27R-48 * Top Cross Rail 25mm x 0.75BMT - Curved to your specified radius 4800 1 1 72.99 15.21 2.540
M28-48 Top Cross Rail 38mm x 0.75BMT 4800 100 5 35.28 7.35 3.300
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M308-24 Furring Channel 16mm 2400 240 8 8.21 3.42 0.950
M308-27 Furring Channel 16mm 2700 240 8 9.24 3.42 1.080
M308-30 Furring Channel 16mm 3000 240 8 10.25 3.42 1.190
M308-36 Furring Channel 16mm 3600 240 8 12.30 3.42 1.430
M308-48 Furring Channel 16mm 4800 240 8 16.40 3.42 1.910
M308-60 Furring Channel 16mm 6000 240 8 20.48 3.41 2.380
M29-24 * Furring Channel 28mm 2400 240 8 10.05 4.19 1.220
M29-27 Furring Channel 28mm 2700 240 8 11.32 4.19 1.370
M29-30 Furring Channel 28mm 3000 240 8 12.58 4.19 1.530
M29-36 Furring Channel 28mm 3600 240 8 15.07 4.19 1.830
M29-48 Furring Channel 28mm 4800 240 8 20.09 4.19 2.440
M29-60 Furring Channel 28mm 6000 240 8 25.04 4.17 3.010
M333-30 Recessed Furring Channel 13mm 3000 200 10 17.56 5.85 1.550
M333-60 Recessed Furring Channel 13mm 6000 200 10 35.07 5.85 3.110
M301-48 * 16mm Ceiling Batten 4800 420 18 13.15 2.74 1.330
M301-60 * 16mm Ceiling Batten 6000 420 12 16.45 2.74 1.660
MB005 Back Blocking Batten with 2.5mm Bend x 300mm 300 50 50 2.71 9.03 0.090
THB24-042-48 24mm Cyclonic Ceiling Batten 4800 200 10 15.96 3.33 1.800
THB24-042-61 24mm Cyclonic Ceiling Batten 6100 200 10 20.23 3.32 2.290
THB40-048-48 40mm Ceiling Batten 4800 150 1 32.38 6.75 3.260
THB40-048-75 * 40mm Ceiling Batten 7500 150 1 50.59 6.75 4.560
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M40-30 M29 Furring Channel Wall Track 3000 250 10 11.96 3.99 0.980
M42-30 M308 Furring Channel Wall Track 3000 250 10 11.58 3.86 0.880
CONCEALED CEILING SYSTEMPRIMARY CHANNELS
FURRING CHANNELS & BATTENS
WALL TRACK
THB24
M28
M27 M29
M308 M42
M40
M333
M301
MB005
* Denotes lead times and minimum order quantity may apply Page 13 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part STOCK SUB PRICE Approx Approx
No. PACK PACK EACH $ l/m kg/piece
M39 Locking Key 400 200 0.71 - 0.018
M534 Cross Rail Spring Hanger 250 250 2.10 - 0.020
M520 Sidemount Spring Hanger 200 200 2.10 - 0.020
M74 SR5 to timber joist 1000 100 0.70 - 0.018
M47 SR5 to concrete 1000 100 0.70 - 0.018
MBW * Bondek® Suspension Wedge 50 50 P.O.A - 0.030
RAMTFE06 Ceiling Suspension Wedge Anchor 6mm x 55mm in 100 Box 100 100 16.98 - 1.140
RAMTFE06120 Ceiling Suspension Wedge Anchor 6mm x 120mm in 100 Box 100 100 43.57 - 2.530
BRDP * Drive Pin Suspension Angle Bracket 25mm x 30mm in 100 Box 100 100 33.63 - 1.402
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M13 M301 Batten to timber/steel (short) - 400 100 0.75 - 0.021
M16 M301 Batten to timber/steel (long) - 400 100 0.83 - 0.041
M80 M301 Batten to conrete - 100 100 2.16 - 0.019
M26 M308-M29 Furring Channel to timber/steel (short) - 400 100 0.81 - 0.040
M94 M308-M29 Furring Channel to timber/steel (long) - 200 50 1.92 - 0.074
M96 * M308-M29 Furring Channel to timber/steel multidirectional - 100 100 6.22 - 1.210
M81 L Bracket for M17-M29 - 100 100 1.02 - 0.026
M237 M308-M29 Furring Channel to concrete - 400 200 1.15 - 0.028
M239 M308-M29 Furring Channel to concrete-threaded - 400 200 1.72 - 0.029
M239BA65 M308-M29 Anchor Clip with 65mm Bolt 65 25 25 4.11 - 0.050
M239BA85 M308-M29 Anchor Clip with 85mm Bolt 85 25 25 4.11 - 0.060
M239BA120 * M308-M29 Anchor Clip with 120mm Bolt 120 25 25 4.51 - 0.060
M239BA150 * M308-M29 Anchor Clip with 150mm Bolt 150 25 25 4.93 - 0.070
M239BA180 * M308-M29 Anchor Clip with 180mm Bolt 180 25 25 5.16 - 0.070
MBF Betafix Clip - 200 50 3.26 - 0.038
MBFS Betafix Clip with Longneck for use with Aircell Insulation - 200 50 3.54 - 0.038
M82 Aircell Clip - Non adjustable Direct Fix Clip (b250) - 250 250 1.41 0.030
M66 M25-M27-M28 Top Cross Rail to timber / steel - 250 100 2.02 - 0.030
M24 M27 - M28 Top Cross Rail to concrete - 250 100 2.39 - 0.030
M24N M27-M28 Top Cross Rail to Concrete Thread Adjustable - 250 100 3.30 - 0.030
M24NB65 * M27-M28 Thread Adj. With 65mm Bolt 65 25 25 4.11 - 0.040
M24NB85 * M27-M28 Thread Adj. With 85mm Bolt 85 25 25 4.11 - 0.040
M24NB120 * M27-M28 Thread Adj. With 120mm Bolt 120 25 25 4.51 - 0.050
M24NB150 * M27-M28 Thread Adj. With 150mm Bolt 150 25 25 4.93 - 0.050
M24NB180 * M27-M28 Thread Adj. With 180mm Bolt 180 25 25 5.16 - 0.060
SUSPENSION CLIPS
DIRECT FIX CLIPS
Drill size required
6mm
M39
M534
M520
M47
M74
TFE06
BRDP
MBW
Drill size required
6mm
M16
M81
M24NB
M66
M24N M24
M239BA M239 M237 M80
M13
M94
M26
M96
MBFS for use with Aircell Insulation
MBF M82
* Denotes lead times and minimum order quantity may apply Page 14 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part STOCK SUB PRICE Approx Approx
No. PACK PACK EACH $ l/m kg/piece
M38 M29 Furring Channel Joiner 400 100 0.89 - 0.049
M272 M27 Top Cross Rail Joiner 100 10 1.88 - 0.144
M254 SR5 Joiner 1000 100 1.24 - 0.010
M140 M301 Nail up batten Joiner 400 100 1.02 - 0.032
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
SOFT GALVANISED ROD FOR SUSPENDED CEILING SYSTEMS
SR5 5mm Galvanised Rod 3600 500 25 4.24 1.18 0.560
SR1T * 5mm Galvanised Rod with M6 Thread one end n/a 500 50 P.O.A - -
SR2T * 5mm Galvanised Rod with M6 Thread both ends n/a 500 50 P.O.A - -
SRH * 5mm Galvanised Rod Cut to Length and Hooked at one end n/a 500 50 P.O.A - -
Hooked and Threaded rod made to order at required length. Minimum order quantities apply.
FULLY THREADED (BOOKER) ROD
SRB06Z1 * M6 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 10 P.O.A - 1.800
SRB06Z3 * M6 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 10 P.O.A - 5.000
SRB08Z1 * M8 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 10 P.O.A - 3.000
SRB08Z3 * M8 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 10 P.O.A - 9.000
SRB10Z1 * M10 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 10 P.O.A - 5.000
SRB10Z3 * M10 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 10 P.O.A - 14.500
SRB12Z1 * M12 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 5 P.O.A - 3.500
SRB12Z3 * M12 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 5 P.O.A - 10.500
SRB16Z1 * M16 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 5 P.O.A - 6.300
SRB16Z3 * M16 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 5 P.O.A - 19.000
SRB20Z1 * M20 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 5 P.O.A - 10.000
SRB20Z3 * M20 Booker Rod - Fully Threaded Zinc Plated x 3.0m 3000 - 5 P.O.A - 30.000
Lead time and Minimum order quantities apply.
NUTS FOR THREADED ROD (Washers Available To Suit)
N-M06 * M6 Zinc Plated Nuts Box 100 P.O.A - 0.230
N-M08 * M8 Zinc Plated Nuts Box 100 P.O.A - 0.580
N-M10 * M10 Zinc Plated Nuts Box 100 P.O.A - 0.930
N-M12 * M12 Zinc Plated Nuts Box 100 P.O.A - 1.190
N-M16 * M16 Zinc Plated Nuts Box 100 P.O.A - 3.353
N-M20 * M20 Zinc Plated Nuts Box 100 P.O.A - 6.200
SUSPENSION ROD
JOINERS
M272 M38 M140 M254
SR5 SRH SRT
SRB - Booker Rod
N-M06 - 12
* Denotes lead times and minimum order quantity may apply Page 15 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
M355-30 * 35mm Ceiling Channel 0.5 BMT 3000 100 10 15.46 5.15 1.630
M355-36 * 35mm Ceiling Channel 0.5 BMT 3600 100 10 18.55 5.15 1.960
Part STOCK SUB PRICE Approx Approx
No. PACK PACK EACH $ l/m kg/piece
M324-2 * Ceiling Bracket for cavity distance of 37 - 60 mm 200 100 6.68 - 0.030
M324-4 * Ceiling Bracket for cavity distance of 53 - 76 mm 200 100 6.79 - 0.040
M324-6 * Ceiling Bracket for cavity distance of 69 - 92 mm 200 100 6.94 - 0.050
M324-8 * Ceiling Bracket for cavity distance of 85 -108 mm 200 100 7.07 - 0.060
*Cavity distance is the distance between the concrete substrate and the back face of the plasterboard lining.
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
BA3030-055-30 * Perimeter Angle 30 x30 x 0.55 BMT 3000 500 1 10.13 3.38 0.960
SLIMCEIL CHANNEL
SLIMCEIL BRACKETS
PERIMETER ANGLE
M324 M355 BA3030
HOW IT WORKS: 1. Fix the bracket to the substrate 2. Insert channel into bracket 3. Use one slot per side to fix channel to bracket 4. Adjust channel to level 5. Lock in with 2 more screws *Slimceil channel can be joined by boxing a 300mm piece of the channel at the join and screwing off on both sides at each end.
Acoustic SLIMCEIL brackets also available. See Page 19
* Denotes lead times and minimum order quantity may apply Page 16 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
USGDX30D Main Runner Standard - 3600 3600 1000 20 P.O.A - 1.200
USGDX30M Cross Runner Standard - 1200 1200 3000 60 P.O.A - 0.370
USGDX30S Cross Runner Light - 600 600 6000 60 P.O.A - 0.150
Part STOCK SUB PRICE Approx Approx
No. PACK PACK EACH $ l/m kg/piece
USG2424 Suspension clip - Banana clip with hook 500 50 P.O.A - 0.018
USGCL315 Suspension clip - SR5 to Main Runner 500 50 P.O.A - 0.030
M88 Wall Angle to Main Runner or Cross Runner 1000 100 P.O.A - 0.020
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
USGMT45-3600 Standard Wall Angle 3600mm 3600 - 40 P.O.A - 0.550
USGML45-3600 * Long Leg Wall Angle 3600mm 3600 - 32 P.O.A - 1.000
USGMS45-3000 Standard Shadowline Wall Angle 3000mm 3000 - 40 P.O.A - 0.530
USGMSL45-3600 * Long Leg Shadowline Wall Angle 3600mm 3600 - 24 P.O.A - 1.130
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
GRAL1 Aluminium Shadowline Wall Angle x 3.6m 3600 10 1 P.O.A - 1.100
GRAL2 * Aluminium Wall Angle 22 x 19 x 3.6m 3600 10 1 P.O.A - 1.100
GRALBH Aluminium Bulkhead Trim Direct Fix x 3.6m 3600 10 1 P.O.A - 1.150
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
SR5 5mm Galvanised Soft Rod 3600 500 25 4.24 1.18 0.560
GRID
SUSPENSION CLIPS & BRACKETS
WALL ANGLE - METAL
WALL ANGLE - ALUMINIUM
SUSPENSION ROD
EXPOSED GRID CEILING SYSTEM
USG2424 USGCL315 M88
GRAL1 GRALBH
USGDX30D USGDX30M USGDX30S
USGMT45-3600 USGML45-3600
USGMSL45 -3600
* Denotes lead times and minimum order quantity may apply Page 17 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part BOX PLT
No. QTY QTY
TILEFRESH * Plaster Tile with white textured vinyl face 1200 x 600 x 9.5mm - 200
TILEKNFS * - 200
Part BOX PLT
No. QTY QTY
USGME904 * USG Impressions ME904 1200x600x15 Square Edge 8 160
USGME905 * USG Impressions ME905 600x600x15 SLT Tegular Edge 16 320
USGME908 * USG Impressions ME908 1200x600x15 SLT Tegular Edge 8 160
USGME2410 USG Radar CP ME2410 1200x600x15 Square Edge 8 160
USGME2420 * USG Radar CP ME2420 1200x600x15 SLT Tegular Edge 8 160
USGME22541 * USG Radar CP ME22541 High NRC 1200x600x19 SLT Tegular Edge 6 120
USGME2220 * USG Radar CP ME2220 600x600x15 SLT Tegular Edge 16 320
USGME2210 * USG Radar CP ME2210 600x600x15 Square Edge 16 320
USGME78575 * USG Eclipse CP ME78575 1200x600x19 Square Edge 6 120
USGME78505 * USG Millennia CP ME78505 1200x600x19 Square Edge 6 120
USGME4421 * USG Olympia Micro CP ME4421 1200x600x15 SLT Tegular Edge 8 160
USGME4411 * USG Olympia Micro CP ME4411 1200x600x15 Square Edge 8 160
USGME4221 * USG Olympia Micro CP ME4221 600x600x15 SLT Tegular Edge 16 320
USGME2882 * USG Illusion 4/48 ME2882 1200x600x19 SLT Tegular Edge 6 120
USGME2852 * USG Illusion 8/12 ME2852 1200x600x19 SLT Tegular Edge 6 120
USGME2842 * USG Illusion 2/24 ME2842 1200x600x19 SLT Tegular Edge 6 120
Knauff / Lafarge Spanshield Smooth tile 1193 x 593
USG CEILING TILES
PLASTERBOARD CEILING TILES
Square edge / Lay in
Angled Tegular edge
Beveled Tegular edge
Kerfed, Bevelled and Cut Back (SBK)
USG Impressions
USG Millenia CP
USG Radar
USG Rock Face
USG Olimpia Micro
* Denotes lead times and minimum order quantity may apply Page 18 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part SUB PRICE Approx
No. PACK EACH kg/piece
RM237R Direct Fix Furring Channel Resilient Mount 100 8.70 0.030
RM24R Resilient Joiner Bracket 100 12.19 0.140
RM48R Resilient Mount Right Angle Bracket 100 10.84 0.067
RM96R Furring Channel to Purlin/Joist Resilient Mount 100 13.20 0.086
RM239R Resilient Anchor Clip with Thread for M29 100 10.41 0.740
RMBFR Adjustable Direct Fix Furring Channel Resilient Mount 100 14.24 0.047
RMBFR6 * Adjustable Direct Fix Resiliant with 6.5 x 50 ZP Masonry Anchor 100 17.80 0.062
RM237TR Furring Channel to Top Cross Rail Resilmount 250 11.16 0.075
RM324-2 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 37- 60mm cavity 100 P.O.A 0.040
RM324-4 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 53 - 76mm cavity 100 P.O.A 0.050
RM324-6 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 69 - 92mm cavity 100 P.O.A 0.060
RM324-8 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 85 - 108mm cavity 100 P.O.A 0.070
Part STOCK SUB LENGTH PRICE Approx
No. PACK PACK (mm) EACH kg/piece
RM239BA65 * Resilient Anchor M17-M29 Clip with 65mm Bolt 25 25 - 10.93 0.100
RM239BA85 * Resilient Anchor M17-M29 Clip with 85mm Bolt 25 25 - 10.93 0.100
RM239BA120 * Resilient Anchor M17-M29 Clip with 120mm Bolt 25 25 - 11.13 0.100
RM239BA150 * Resilient Anchor M17-M29 Clip with 150mm Bolt 25 25 - 11.36 0.110
RM239BA180 * Resilient Anchor M17-M29 Clip with 180mm Bolt 25 25 - 11.66 0.110
RM581 * Resilient Furring Channel 200 40 3658 22.05 0.982
RM126 Staggered Stud Clip (Acoustic) 500 100 - 1.41 0.020
RM127 Staggered Stud Clip - Box type (64mm Stud to 92mm Track) 500 100 - 4.70 0.070
RM50R * Isolation/Acoustic Hanger - 54kg Capacity - Black (Other Capacities Available) 100 100 - 13.93 0.070
RN5-38 * Rubber Nut for Fixing Rubber Impact Mats 5mm x 38mm 100 100 - 152.21 0.010
RM10 * Rubber Impact Mats 50 x 50 x 10 100 100 - 3.50 0.030
Part STOCK SUB Width Length PRICE Approx
No. PACK PACK (mm) m EACH kg/roll
WAVEBAR Flexible Noise Barrier
INWB4-05 * WaveBar 4kg - 1350mm x 5.0m Roll - 1 1350 5 P.O.A 27.00
INWB6-05 * WaveBar 6kg - 1350mm x 5.0m Roll - 1 1350 5 P.O.A 40.50
INWB8-05 * WaveBar 8kg - 1350mm x 5.0m Roll - 1 1350 5 P.O.A 54.00
WaveBar
STOCK
PACK
100
100
100
100
100
100
100
250
200
200
200
200
SOUND ISOLATION SYSTEMSResilmounts
Acoustic BracketsRM237R
RM239BA
RM50R RN5-38 RM10 RM581 RM126 RM127
RMBFR6 RMBFR RM237R
RM48R
RM24R RM96R
RM324 RM237TR
* Denotes lead times and minimum order quantity may apply Page 19 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THB24-042-48 24mm x 0.42 BMT (cyclonic) 4800 200 1 15.96 3.33 1.800
THB24-042-61 24mm x 0.42 BMT (cyclonic) 6100 200 1 20.23 3.32 2.290
THB40-048-48 * 40mm x 0.48 BMT 4800 150 1 32.38 6.75 3.264
TOP HATS & PURLINSTOP HAT CEILING / ROOF BATTENS
THB24 THB35
40mm 38mm
24m
m
35m
m
FastStud keeps a large range of
Tophat Battens, Purlins, & Tophat Junction Studs in
stock.
Span Tables available upon
request
THB40
43mm
40m
m
* Denotes lead times and minimum order quantity may apply Page 20 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THB50-075-60 50mm x 0.75 BMT 6000 100 1 71.11 11.85 6.720
THB50-095-60 * 50mm x 0.95 BMT 6000 100 1 84.55 14.09 8.280
THB64-095-60 64mm x 0.95 BMT 6000 100 1 97.43 16.24 9.720
THB64-115-60 * 64mm x 1.15 BMT 6000 100 1 117.08 19.51 11.700
THB75-075-60 * 75mm x 0.75 BMT 6000 100 1 94.65 15.78 8.640
THB75-095-60 75mm x 0.95 BMT 6000 100 1 108.77 18.13 10.860
THB75-115-60 * 75mm x 1.15 BMT 6000 100 1 130.95 21.83 12.952
THB96-075-60 * 96mm x 0.75 BMT 6000 100 1 111.82 18.64 10.620
THB96-095-60 96mm x 0.95 BMT 6000 100 1 133.73 22.29 13.320
THB96-115-60 * 96mm x 1.15 BMT 6000 100 1 160.74 26.79 15.960
THB120-095-60 120mm x 0.95 BMT 6000 100 1 168.05 28.01 16.740
THB120-115-60 * 120mm x 1.15 BMT 6000 100 1 202.11 33.69 19.980
TOP HAT BATTENS
Material: G550 Z275
THB50
THB64
THB75
THB96
THB120
Non standard lengths available upon request. Lead time and minimum order quantities apply.
* Denotes lead times and minimum order quantity may apply Page 21 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THJ5015-36 50mm x 15mm x 1.15 TCT 3600 100 1 31.06 8.63 3.260
THJ5015-60 50mm x 15mm x 1.15 TCT 6000 100 1 51.79 8.63 5.430
THJ5024-36 50mm x 24mm x 1.15 TCT 3600 100 1 36.50 10.14 4.220
THJ5024-60 50mm x 24mm x 1.15 TCT 6000 100 1 60.83 10.14 7.030
THJ5035-36 50mm x 35mm x 1.15 TCT 3600 50 1 46.49 12.91 5.020
THJ5035-60 50mm x 35mm x 1.15 TCT 6000 50 1 77.47 12.91 8.360
THJ5035-72 50mm x 35mm x 1.15 TCT 7200 50 1 92.94 12.91 10.030
THJ5050-36 50mm x 50mm x 1.15 TCT 3600 50 1 52.81 14.67 5.977
THJ5050-60 * 50mm x 50mm x 1.15 TCT 6000 50 1 87.96 14.66 8.300
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THJ7515-60 75mm x 15mm x 1.15 TCT 6000 100 1 59.29 9.88 6.750
THJ7524-60 75mm x 24mm x 1.15 TCT 6000 100 1 70.15 11.69 8.460
THJ7535-60 75mm x 35mm x 1.15 TCT 6000 50 1 93.39 15.57 9.740
THJ7535-72 * 75mm x 35mm x 1.15 TCT 7200 50 1 112.05 15.56 11.690
THJ7550-36 * 75mm x 50mm x 1.15 TCT 3600 50 1 58.82 16.34 6.816
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THJ12035-60 * 120 x 35 x 1.15 TCT TOP HAT JUNCTION STUD x 6.0m* 6000 100 50 94.91 15.82 12.000
THJ12035-72 * 120 x 35 x 1.15 TCT TOP HAT JUNCTION STUD x 7.2m* 7200 100 50 113.89 15.82 14.400
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
THJL5015-36 * 50 X 15 X 0.75 BMT Light Top Hat Junction Stud 3600 100 50 P.O.A P.O.A 3.260
THJL5024-36 * 50 X 24 X 0.75 BMT Light Top Hat Junction Stud 3600 100 50 P.O.A P.O.A -
THJL5035-36 * 50 X 35 X 0.75 BMT Light Top Hat Junction Stud 3600 50 50 P.O.A P.O.A -
THJL5035-60 * 50 X 35 X 0.75 BMT Light Top Hat Junction Stud 6000 50 50 P.O.A P.O.A -
THJL5050-36 * 50 X 50 X 0.75 BMT Light Top Hat Junction Stud 3600 50 50 P.O.A P.O.A 3.900
THJL5050-60 * 50 X 50 X 0.75 BMT Light Top Hat Junction Stud 6000 50 50 P.O.A P.O.A 6.500
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ 1/m kg/piece
JHTHEX60 * JH ExoTec Zincalume Top Hat x 6.0m (pk45)* 6000 45 - P.O.A P.O.A -
JHTHEX72 * JH ExoTec Zincalume Top Hat x 6.0m (pk45)* 7200 45 - P.O.A P.O.A -
JHTHIN60 * JH Zincalume Intermediate Top Hat 50 x 35 x6.0m (pk 50)* 6000 50 - P.O.A P.O.A -
JHTHIN72 * JH Zincalume Intermediate Top Hat 50 x 35 x7.2m (pk 50)* 7200 50 - P.O.A P.O.A -
TOP HAT JUNCTION STUD 50mm
TOP HAT JUNCTION STUD 75mm
TOP HAT JUNCTION STUD 120mm
TOP HAT JUNCTION STUD - LIGHT
JAMES HARDIE TOP HATS
THJ7515 THJ7524 THJ7535 THJ7550
THJ5015 THJ5024 THJ5035 THJ5050
Non standard lengths available upon request. Lead time and minimum order quantities apply.
* Denotes lead times and minimum order quantity may apply Page 22 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part STOCK SUB LENGTH PRICE Approx
No. PACK PACK (mm) EACH kg/piece
JHTHG36 * 10 1 3600 P.O.A 0.500
JHTHB299 * 10 1 2990 P.O.A 1.380
JHTHB239 * 10 1 2390 P.O.A 1.103
JHTHB1.19 * 10 1 1190 P.O.A 0.549
Part STOCK SUB LENGTH PRICE Approx
No. PACK PACK (mm) EACH kg/piece
90mm LONG IN BOXES OF 100
PN9001 Nylon Packers 1.5mm x 90mm - 100 90 P.O.A 0.560
PN9003 Nylon Packers 3.2mm x 90mm - 100 90 P.O.A 1.040
PN9005 Nylon Packers 5mm x 90mm - 100 90 P.O.A 1.520
PN9006 Nylon Packers 6.4mm x 90mm - 100 90 P.O.A 1.900
PN9010 Nylon Packers 10mm x 90mm - 100 90 P.O.A 3.000
# 75mm long nylon packers in boxes of 100 or 200 available upon request.
MIXED PACKERS
PNHSTP01 * HandiY nylon Top Hat Packers Mixed Trade Pack - 530 75-90 P.O.A -
Part STOCK SUB PRICE Approx
No. PACK PACK EACH kg/piece
3M0300 * 3M 300 HIPA Clean 1 1 P.O.A. -
3M0700 * 3M 700 Adhesive Cleaner and Solvent 1 1 P.O.A. -
3M4941-12 * 3M VHB Grey Tape 4941 1.1mm x 12mm x 33m 1 1 P.O.A. -
3M4941-24 * 3M VHB Grey Tape 4941 1.1mm x 24mm x 33m 1 1 P.O.A. -
3M4991-12 * 3M VHB Grey Tape 4991 2.3mm x 12mm x 33m 1 1 P.O.A. -
3M4991-15 * 3M VHB Grey Tape 4991 2.3mm x 15mm x 33m 1 1 P.O.A. -
3M4991-24 * 3M VHB Grey Tape 4991 2.3mm x 24mm x 33m 1 1 P.O.A. -
3M8447 * 3M - 8447 SCOTCH BRITE High Cut Pad - Box of 20 1 1 P.O.A. -
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
BA7575-075-30 75 x 75 x 0.75mm BMT 3000 500 1 38.16 12.72 2.830
BA7575-115-30 75 x 75 x 1.15mm BMT 3000 500 1 53.65 17.88 4.240
BA100100-075-30 100 x 100 x 0.75mm BMT 3000 500 1 48.70 16.23 3.770
BA100100-115-30 * 100 x 100 x 1.15mm BMT 3000 500 1 69.60 23.20 5.650
Part SUB PRICE Approx Approx
No. Min Max PACK EACH $ l/m kg/piece
BRTH1 Tophat Bracket Gal 35 x 48 x 35 x 1.9mm BMT - Type 1 for THJ5035 Only 35 50 1 P.O.A - 0.160
BRTH2 Tophat Bracket Gal 55 x 48 x 55 x 1.9mm BMT - Type 2 for THJ5035 Only 55 70 1 P.O.A - 0.220
JAMES HARDIE TOP HAT ACCESSORIESJH ExoTec Gasket Snap Strip x 3.62m
Range (mm)
FACADE ANGLES
TOP HAT BRACKETS
3M TAPES
TOP HAT PACKERS #
JH ExoTec Backing Strip (0.55 x 2.99m)
JH ExoTec Backing Strip (0.55 x 2.39m)
JH ExoTec Backing Strip (0.55 x 1.19m)
Tophat brackets give the flexibility of adjustment between 35mm and 70mm from the substrate. Contact Faststud for complete fixing details.
* Denotes lead times and minimum order quantity may apply Page 23 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
PUC10015-61 * C Purlin 100mm x 1.5BMT x 6.1m 6100 50 1 P.O.A - 15.920
PUC15015-61 * C Purlin 150mm x 1.5BMT x 6.1m 6100 50 1 P.O.A - 21.900
PUC20015-61 * C Purlin 200mm x 1.5BMT x 6.1m 6100 50 1 P.O.A - 27.450
Part Approx Approx
No. $ l/m kg/metre
C/Z10012 * C or Z Purlin 100mm x 1.2 BMT P.O.A 2.080
C/Z10015 * C or Z Purlin 100mm x 1.5 BMT P.O.A 2.590
C/Z10019 * C or Z Purlin 100mm x 1.9 BMT P.O.A 3.270
C/Z15012 * C or Z Purlin 150mm x 1.2 BMT P.O.A 2.860
C/Z15015 * C or Z Purlin 150mm x 1.5 BMT P.O.A 3.550
C/Z15019 * C or Z Purlin 150mm x 1.9 BMT P.O.A 4.480
C/Z15024 * C or Z Purlin 150mm x 2.4 BMT P.O.A 5.640
C/Z20012 * C or Z Purlin 200mm x 1.2 BMT P.O.A 3.640
C/Z20015 * C or Z Purlin 200mm x 1.5 BMT P.O.A 4.520
C/Z20019 * C or Z Purlin 200mm x 1.9 BMT P.O.A 5.700
C/Z20024 * C or Z Purlin 200mm x 2.4 BMT P.O.A 7.170
C/Z25019 * C or Z Purlin 250mm x 1.9 BMT P.O.A 6.460
C/Z25024 * C or Z Purlin 250mm x 2.4 BMT P.O.A 8.120
C/Z30019 * C or Z Purlin 300mm x 1.9 BMT P.O.A 7.970
C/Z30024 * C or Z Purlin 300mm x 2.4 BMT P.O.A 10.040
C/Z30030 * C or Z Purlin 300mm x 3.0 BMT P.O.A 12.510
Part Approx Approx
No. $ l/m kg/metre
PUCT10012 * Track for C100 Purlin - 1.2BMT - 101mm I.D. P.O.A 2.080
PUCT15012 * Track for C150 Purlin - 1.2BMT - 151mm I.D. P.O.A 2.860
PUCT20012 * Track for C200 Purlin - 1.2BMT - 201mm I.D. P.O.A 3.640
PUCT_____ * Other Track sizes available upon reqest P.O.A -
Part STOCK SUB PRICE Approx Approx
No. PACK PACK EACH $ l/m kg/piece
BRGP100 General Purpose Bracket to suit 100mm Purlin - 1 P.O.A - 0.200
BRGP150 General Purpose Bracket to suit 150mm Purlin - 1 P.O.A - 0.360
BRGP200 General Purpose Bracket to suit 200mm Purlin - 1 P.O.A - 0.540
PUB12030F Purlin Bolt & Nut - Flanged M12 x 30mm Zinc 100 1 P.O.A - 0.070
C & Z PURLINS (made to order)
TRACK FOR C PURLINS (made to order)
PURLIN ACCESSORIES
C & Z PURLINSC PURLINS (standard size)
C Purlin Z Purlin
Purlin Bolt & Nut General Purpose
Brackets
Purlin & Track Wall System
* Denotes lead times and minimum order quantity may apply Page 24 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Faststud sells a wide range of James Hardie board products and accessories. For availability and pricing please contact Faststud.
Soff
its
Bra
cin
g
Co
lum
ns
Stru
ctu
ral f
loo
rin
g
Scyon Linea weatherboard
Scyon Matrix cladding
Scyon Stria cladding
Bat
hro
om
co
nst
ruct
ion
James Hardie Top Coat
Exte
rnal
cla
dd
ing
PRODUCT
ComTex façade panel and fixing system
EasyLap panel
ExoTec façade panel and fixing system
HardieBrace sheet
HardieBrake thermal strip
HardiePlank weatherboard
Scyon Secura exterior flooring
Scyon Secura interior flooring
Scyon Axon cladding
Versilux lining
Villaboard lining
APPLICATION
Un
der
lays
Cav
ity
con
stru
ctio
n
Co
mm
erci
al f
acad
es
Dec
kin
g
Dec
ora
tive
Eave
s
Fen
cin
g
FIBRE CEMENT PRODUCTS
HardieTex system
James Hardie Base Coat
HardieFlex sheet
HardieGroove lining
HardiePanel compressed sheet
PrimeLine weatherboard
PanelClad sheet
PineRidge lining
Fire
an
d a
cou
stic
ally
rat
ed w
all
Inte
rnal
lin
ing
Join
tin
g co
mp
ou
nd
Ther
mal
bre
ak
James Hardie Products and Application Summary.
Scyon Axon Scyon Linea
Scyon Matrix Scyon Stria
Scyon Secura
* Denotes lead times and minimum order quantity may apply Page 25 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017(V4.0)
Y*
Y*
28.30
24.50
Y*
21.60
18.93
Y*
Y*
Y*
150
600
Y*
Y*
Y*
Y*
21.10
Y* Y* Y* 12.50
12.60
Y*
19900
22 600
Scyon Secura Flooring
Internal/External
325
40514
16 255
Scyon Stria Cladding
890
1190
8
Y*
Scyon Matrix Cladding
Y*
18016Scyon Linea Weatherboard
590
Scyon Axon Cladding 9 1200
6.72
HardiPanel
(Compressed Fibre Cement)1200 Y* Y*
Y*
15
900 Y* Y*18
900
Y1200
Y*
8.00Scyon Axent Trim45
1989
8.69
Y*
6
600
Y* Y*
Y* Y*
ComTex
91200
ExoTec
(CFC)1200
HardiTex
4.5
HardiFlex
Y*
900
9.54
12
Y* Y Y* Y
Y*
Y
9 1200 Y* 13.20
Y*9.62
13.88
Y Y
16.26
3000 3600Product (mm) (mm)
Y*
Y*
Y* Y*
Y Y Y*
Y Y Y*Y Y
Y* Y*
1200 Y* Y*
Y*27.25
31.87Y* Y* Y* Y*
Y*
Y*
Y* Y*
Y*
Y*
Y* Y* Y* Y*
Y* Y* Y* Y* Y*
7.5
450
600
900
Y*
Y
750
Y* Y*
1200
Y Y 21.90
11.331200 Y* Y* Y
Y* Y* Y900
1225
900 Y Y Y
Y
1200 Y YVersilux
900
9
6
9 1200
1200
Villaboard6
900
FIBRE CEMENT BOARD SIZE SUMMARY (Other sizes available upon request)
PLASTERBOARD THICKNESS WIDTHS LENGTHS (mm) MASS
1200 1500 1800 2100 2400
7.79
kg/m242002700
HardiBrace 5925 Y* Y*
1350 Y
13.94
EasyLap 8.5900
120012.46
HardieGroove 12007.5
Y*
Y*
11.70Y*
Y*
Y* 11.67
HardiePlank 7.5
205
230
300
11.06
11.79
9.32PanelClad 6 1200
Y*
Y* Y*
Y*
Y Y
Y* Y*
1200 Y*
Y Y*
* Denotes lead times and minimum order quantity may apply Page 26 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017(V4.0)
Products for Internal Lining
Typical Internal Villaboard Application
Typical Internal Villaboard Sheet Layout
* Denotes lead times and minimum order quantity may apply Page 27 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017(V4.0)
Products for External Cladding
Scyon Axent trim - is a thick and versetile trim made from Scyon, an advanced cement composite. Scyon Axent trim is an easy way to add finishing touches that keep their finish Scyon Axon cladding is a vertically grooved cladding panel that looks sharp and uniform. Pre-primed and easy to install cladding system with a pristine look that lasts. Scyon Linea weatherboard - is a 16mm thick weatherboard with deep shadow lines. Scyon Matrix cladding - an exterior cladding system with a geometric, expressed-joint look. Scyon Secura interior & exterior flooring - structural flooring
substrate for tile finishes over timber or lightweight steel floor joists. Scyon Stria cladding - features horizontal ship-lapped joint. Pre-primed fast and easy to install for achieving a timeless and classic look.
ComTex facade panel - features pre-primed panel that's site-finished with a high-build acrylic texture system that incoporates reinforced jointing and texture coating. The finished system creates a rendered look without the need for masonry. ExoTec facade panel - is a compressed facade panel featuring expressed joints either site painted or pre-finished off-site. ExoTec facade panel is the most popular fibre cement commercial facade system on the market. HardieFlex sheet - is a smooth, flat sheet that is painted on site to create a flat panel look. HardiePlank weatherboard - is a site-painted weatherboard available in a range of different profiles, from traditional to contemporary. HardieTex blue board system - strong base sheets that are designed to be acrylic render coated with colour and texture, giving a rendered look without the need for masonry. PrimeLine weatherboard - is a pre-primed, site-painted weatherboard, available in a range of profiles from contemporary to traditional.
* Denotes lead times and minimum order quantity may apply Page 28 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017(V4.0)
Various CSR Gyprock and Boral Plasterboards Available on Request please contact Faststud for details.
PLASTERBOARDPLASTERBOARD PRODUCT GUIDE
PLASTERBOARD USAGE
Regular Plasterboard10mm and 13mm regular plasterboard is used in typical internal wall and
ceiling lining situations.
SoundSTOP
SoundSTOP 10 and 13mm is a plasterboard with high density core
providing excellent sound insulation for residential and commercial
applications. Used in wall and ceiling systems, to provide superior levels
of sound resistance.
FlexiBOARDFlexiBoard is a 6mm flexible plasterboard that can be used to create
curved walls and ceilings.
UniSPANUniSPAN is a 10mm reinforced plasterboard for ceilings. It is designed to
span internal ceiling joists or furring channels up to 600mm without
sagging
Wet Area Plasterboard10mm, 13mm and 16mm water resistant plasterboard suitable for use in
internal wet areas and as a substrate for tiles.
Fibrerock Aqua-ToughFibreROCK Aqua-Tough 13mm and 16mm is an interior lining that resists
toxic mould and incorporates very high impact, sound, fire and water
resistance properties.
X-BlockX-Block 13mm achieves an effective radiation barrier without the use of
lead, unlike traditional x-ray lining systems.
FireSTOPFireSTOP 13mm and 16mm is a fire resistant plasterboard used in lining
applications where a Fire Resistance Level (FRL) is required.
MultiSTOPMultiSTOP 13mm is an all round plasterboard that incoporates impact,
water, fire resistance as well as sound insulating properties. Ideal
plasterboard for multi-purpose applications.
ShaftLinerShaftLiner is a 25mm fire resistant plasterboard designed for shafts and
ducts in multi-level constructions can also be used in Intertenancy wall
system such us partiwalls and common walls.
* Denotes lead times and minimum order quantity may apply Page 29 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
PLASTERBOARD SIZE GUIDEPLASTERBOARD THICKNESS WIDTHS LENGTHS (mm) MASS
1350 Y* Y*
Product (mm) (mm) 600 2400 2700
131200
Regular Plasterboard
101200 Y* Y* Y
1350
Y*
kg/m23000 3600 4200 4800 5400 6000
8.30Y*
Y* Y* Y*6.20
Y* Y*Y* Y*
Y Y
Y Y* Y*Y Y Y
6.901350 Y* Y* Y* Y*
Y* Y* Y* Y* Y*1200
Y*Unispan 10
13 1200 Y Y* Y
Wet Area Plasterboard10
1200 Y* Y* Y* Y* Y*
1350 Y*
9.20Y* Y*
9.60
Y*7.40
10
Flexiboard 6.5 1200
13 1200Soundstop
1200
Y Y*
Y 4.10
12.00
10.501350 Y* Y*
Y Y*1200 Y* Y*
13.001350 Y*
1200 Y* Y* Y Y*
Multistop 131200 Y*
Firestop
Y*
13
16
Y*11.80
1200
1350
16 1200 Y*
17.20
Fibrerock Aqua-Tough13 1200 Y*
Y*X-Block 13
15.00
12.00
20.50
As well as plasterboard Faststud sells a wide range of jointing and setting compounds and products. Please
see Plastering Accessories & Tools section on page 42 for full range of products supplied.
Y* Y*ShaftLiner 25 600
USG Boral plasterboard is a premium product being: 1. Quality assured under AS/NZ ISO 90001, AS/NZ ISO 9002 and AS/NZS 2588. 2. Made from sustainable materials - plasterboard paper is 100% recycled content, abundantly sourced Gypsum from Australia. 3. Friendly to the enviroment - Low embodied energy + regular plasterboard can be recycled into new board or as soil conditioner. 4. GECA Certified - various Boral boards have been certified by Good Environment Choice Australia (GECA).
* Denotes lead times and minimum order quantity may apply Page 30 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
CEX90-24 External Angle - 90° 2400 3300 50 4.46 1.86 0.370
CEX90-27 External Angle - 90° 2700 3300 50 4.98 1.84 0.420
CEX90-30 External Angle - 90° 3000 3300 50 5.54 1.85 0.470
CEX90-36 External Angle - 90° 3600 3300 50 6.65 1.85 0.560
CEX90D-30 * Plasterlock External Angle - 90° 3000 480 20 6.78 2.26 0.470
CEX135-24 * Splayed External Angle - 135° 2400 3300 50 5.37 2.24 0.370
CEX135-27 * Splayed External Angle - 135° 2700 3300 50 6.04 2.24 0.420
CEX135-30 Splayed External Angle - 135° 3000 3300 50 6.68 2.23 0.470
CEX135-36 * Splayed External Angle - 135° 3600 3300 50 8.03 2.23 0.560
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
CIN90-24 Internal Angle - 90° 2400 3300 50 5.81 2.42 0.380
CIN90-27 Internal Angle - 90° 2700 3300 50 6.56 2.43 0.430
CIN90-30 Internal Angle - 90° 3000 3300 50 7.25 2.42 0.480
CIN90-36 * Internal Angle - 90° 3600 3300 50 8.67 2.41 0.570
CIN135-30 Splayed Internal Angle - 135° 3000 3300 50 9.32 3.11 0.480
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
SL6 See PVCSL06T in PVC Section
SL10 Shadowline 10mm x 10mm (AxB) 3000 500 20 7.90 2.63 0.490
SL1020-30 * Shadowline 10mm x 20mm (AxB) 3000 500 20 P.O.A P.O.A 0.490
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
LSA10 Long Leg Stopping Angle 10mm 3000 500 20 7.82 2.61 0.430
LSA13 Long Leg Stopping Angle 13mm 3000 500 20 8.05 2.68 0.470
LSA16 Long Leg Stopping Angle 16mm 3000 500 20 8.64 2.88 0.520
PLASTERBOARD FINISHING SECTIONSEXTERNAL CORNERS
INTERNAL CORNERS
SHADOWLINE STOPPING ANGLE
STOPPING ANGLE
CEX90 CEX90D CEX135
CIN90 CIN135
LSA
SL
A
B
* Denotes lead times and minimum order quantity may apply Page 31 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
PAB180-30 Perforated Arch Bead - Round holes 3000 500 50 6.11 2.04 0.320
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
SB6-30 Metal Stopping Bead 6mm 3000 200 20 9.66 3.22 0.500
SB10-30 Metal Stopping Bead 10mm 3000 200 20 8.21 2.74 0.640
SB13-30 Metal Stopping Bead 13mm 3000 200 20 8.21 2.74 0.610
SB16-30 Metal Stopping Bead 16mm 3000 200 20 9.37 3.12 0.810
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
MCB6-30 Metal Casing Bead 6mm 3000 200 20 8.70 2.90 0.630
MCB10-30 Metal Casing Bead 10mm 3000 200 20 7.28 2.43 0.580
MCB13-30 Metal Casing Bead 13mm 3000 200 20 7.28 2.43 0.580
MCB16-30 Metal Casing Bead 16mm 3000 200 20 9.76 3.25 0.810
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
EXJ6 Expansion Joint 6mm - Black rubber 3000 15 15 49.40 16.47 0.580
EXJ10 Expansion Joint 10mm - Black rubber 3000 15 15 49.40 16.47 1.180
EXJ10R Expansion Joint - White rubber - Suits all board thicknesses. 3000 100 10 53.68 17.89 1.240
MB005 Back Blocking Batten with 2.5mm Bend x 300mm 300 - - 2.51 - 0.090
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
BA3030-004-30 * 30 x 30 x 0.4mm BMT 3000 500 1 5.03 1.68 0.572
BA3030-055-30 * 30 x 30 x 0.55mm BMT 3000 500 1 10.13 3.38 0.960
BA3535-075-36 35 x 35 x 0.75mm BMT 3600 500 1 15.27 4.24 1.580
BA5050-075-36 50 x 50 x 0.75mm BMT 3600 500 1 20.92 5.81 2.230
BA5050-115-36 50 x 50 x 1.15mm BMT 3600 500 1 32.50 9.03 3.360
BA7575-075-30 75 x 75 x 0.75mm BMT 3000 500 1 38.16 12.72 2.830
BA7575-115-30 75 x 75 x 1.15mm BMT 3000 500 1 53.65 17.88 4.240
BA100100-075-30 100 x 100 x 0.75mm BMT 3000 500 1 48.70 16.23 3.770
BA100100-115-30 * 100 x 100 x 1.15mm BMT 3000 500 1 69.60 23.20 5.650
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
BAS7550-115-24 * 75 x 50 x 1.15mm BMT 2400 200 1 P.O.A P.O.A 2.910
BAS5050-075-24 50 x 50 x 0.75mm BMT 2400 500 1 P.O.A P.O.A 1.486
ARCH BEAD
STOPPING BEADS
CASING BEADS
EXPANSION JOINTS
BACKING ANGLES
HEBEL®/AAC SLOTTED ANGLES
Custom size backing angles can be made to order
PAB180
SB
MCB
EXJ10 EXJ10R
BA
* Denotes lead times and minimum order quantity may apply Page 32 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
PVCCB06 * PVC Casing Bead 6mm 3000 50 50 P.O.A - 0.240
PVCCB10 PVC Casing Bead 10mm 3000 50 50 P.O.A - 0.240
PVCCB13 PVC Casing Bead 13mm 3000 50 50 P.O.A - 0.320
PVCSB13 * PVC Set Casing Stopping Bead 13mm x 3.0m 3000 50 50 P.O.A - 0.280
PVCCEX135 PVC External Corner Angle 135° (Adjustable from 120° TO 140°) 3000 50 50 P.O.A - 0.220
PVCCEX90 PVC External Corner Angle 90° 3000 50 50 P.O.A - 0.300
PVCCIN135 PVC Internal Corner Angle 135° (Adjustable from 70° to 150°) 3000 70 70 P.O.A - 0.260
PVCMAG60 * PVC Magic Corner Bead & Expansion Joint - Flexible 60m Roll 60m 1 1 P.O.A - 4.580
PVCMAG35 * PVC Magic Corner Kit - Includes 35m roll + installation tool and adhesive 35m 1 1 P.O.A - 9.000
PVCEXJ10 * PVC Deep V Expansion Joint with Tearaway Strips 3000 20 20 P.O.A - 0.500
PVCEXJH PVC Hideaway Expansion Joint with Tearaway Strips 3000 25 25 P.O.A - 0.510
PVCL06T PVC Tearaway L Bead 6mm 3000 50 50 P.O.A - 0.230
PVCL10T PVC Tearaway L Bead 10mm 3000 50 50 P.O.A - 0.260
PVCL13T PVC Tearaway L Bead 13mm 3000 50 50 P.O.A - 0.280
PVCL25 * PVC Oversized L Bead 25mm 3000 50 50 P.O.A - 0.430
PVCL32 * PVC Oversized L Bead 32mm 3000 50 50 P.O.A - 0.510
PVCL68 * PVC Oversized L Bead 68mm (Also pre scored at 53mm) 3000 30 30 P.O.A - 0.860
PVCL80 * PVC Super L Bead 80mm (Also pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A - 0.980
PVCL145 * PVC Giant L Bead 145mm (Also pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A - 1.630
PVCABL16 * PVC Archway L Bead 13mm & 16mm 3000 50 50 P.O.A - 0.280
PVCABL80 * PVC Archway Super L Bead 80mm (Pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A - 0.980
PVCABL145 * PVC Archway Giant L Bead 145mm (Pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A - 1.630
PVCABEX * PVC Archway Corner Bead 90° 3000 50 50 P.O.A - 0.300
PVCSL06T PVC Tearaway Shadowline 6mm 3000 25 25 P.O.A - 0.220
PVCSL10T PVC Tearaway Shadowline 10mm 3000 25 25 P.O.A - 0.240
PVCSL10TF * PVC Flexible Shadowline 10mm with Tearaway Strip 3000 25 25 P.O.A - 0.250
PVCTRIM PVC Finish Trim for L Beads and Window Reveals 3000 30 30 P.O.A - 0.110
PVCGA * PVC Flexible Wall Angle for ceiling grid 28mm x 22mm 2400 63 63 P.O.A - 0.420
PVCFC89 * PVC 89mm Wall Fast Cap for 64mm stud with 13mm plasterboard 3000 10 10 P.O.A - 1.250
PVCSPAD PVC Spray Adhesive 467 g - 12 1 P.O.A - 0.594
PVCSPCL * PVC Spray Citrus Cleaner 467g - 6 1 P.O.A - 0.556
PVC FINISHING SECTIONS
Magic Corner Kit Includes spray adhesive
and installation tool.
Spray Adhesive & Cleaner
PVCCB 10/13
PVCCIN 135
PVCGA
PVC TRIM
PVCEXJ10
PVCEXJH PVCL10T
PVCCIN 90
PVCCEX 135
PVCCEX90
PVCSL10T PVCABEX 90
PVCAB L16
PVCABL145 PVCL145 PVCABL80
PVC SL10TF
PVCFC89
PVCMAG
PVCL80
PVCSB13
PVCMAG35
* Denotes lead times and minimum order quantity may apply Page 33 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
FC79-27 * EZY CAP 79 x 0.8 x 2700mm. (Suits 51mm stud + 13 + 13) 2700 - 1 P.O.A - 2.250
FC86-27 EZY CAP 86 x 0.8 x 2700mm. (Suits 64mm stud + 10 + 10) 2700 - 1 P.O.A - 2.360
FC92-27 EZY CAP 92 x 0.8 x 2700mm. (Suits 64mm stud + 13 + 13) 2700 - 1 P.O.A - 2.470
FC98-27 EZY CAP 98 x 0.8 x 2700mm. (Suits 76mm stud + 10 + 10) 2700 - 1 P.O.A - 2.570
FC104-27 EZY CAP 104 x 0.8 x 2700mm. (Suits 76mm stud + 13 + 13) 2700 - 1 P.O.A - 2.650
FC112-27 * EZY CAP 112 x 0.8 x 2700mm. (Suits 92mm stud + 10 + 10) 2700 - 1 P.O.A - 2.820
FC118-27 * EZY CAP 118 x 0.8 x 2700mm. (Suits 92mm stud + 13 + 13) 2700 - 1 P.O.A - 2.940
FC127-27 EZY CAP 127 x 0.8 x 2700mm. (Suits 92mm stud + 16 + 16) 2700 - 1 P.O.A - 3.090
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
RA20-30 * 20mm x 0.75 BMT 3000 25 1 P.O.A - 0.900
RA20-36 3600 25 1 P.O.A - 1.080
RA25-30 25mm x 0.75 BMT 3000 25 1 P.O.A - 1.050
RA25-36 3600 25 1 P.O.A - 1.260
RA30-30 * 30mm x 0.75 BMT 3000 25 1 P.O.A - 1.250
RA30-36 3600 25 1 P.O.A - 1.500
RA35-30 35mm x 0.75 BMT 3000 25 1 P.O.A - 1.300
RA35-36 * 3600 25 1 P.O.A - 1.560
RA40-30 * 40mm x 0.75 BMT 3000 25 1 P.O.A - 1.240
RA40-36 * 3600 25 1 P.O.A - 1.490
RA45-30 45mm x 0.75 BMT 3000 25 1 P.O.A - 1.430
RA45-36 3600 25 1 P.O.A - 1.720
RA50-30 50mm x 0.75 BMT 3000 25 1 P.O.A - 1.600
RA50-36 3600 25 1 P.O.A - 1.920
RA60-30 * 60mm x 0.75 BMT 3000 25 1 P.O.A - 1.700
RA60-36 3600 25 1 P.O.A - 2.050
RA65-30 65mm x 0.75 BMT 3000 25 1 P.O.A - 1.900
RA65-36 3600 25 1 P.O.A - 2.280
RA75-30 * 75mm x 0.75 BMT 3000 25 1 P.O.A - 1.980
RA75-36 3600 25 1 P.O.A - 2.370
RA80-30 * 80mm x 0.75 BMT 3000 25 1 P.O.A - 2.070
RA80-36 3600 25 1 P.O.A - 2.480
RA90-30 90mm x 0.75 BMT 3000 25 1 P.O.A - 2.300
RA90-36 3600 25 1 P.O.A - 2.760
RA100-30 100mm x 0.75 BMT 3000 25 1 P.O.A - 2.500
RA100-36 3600 25 1 P.O.A - 3.000
RA110-30 * 110mm x 0.75 BMT 3000 25 1 P.O.A - 2.610
RA110-36 3600 25 1 P.O.A - 3.130
RA120-30 * 120mm x 0.75 BMT 3000 25 1 P.O.A - 2.900
RA120-36 3600 25 1 P.O.A - 3.480
RA135-30 135mm x 0.75 BMT 3000 25 1 P.O.A - 3.060
RA135-36 * 3600 25 1 P.O.A - 3.670
RA150-30 150mm x 0.75 BMT 3000 25 1 P.O.A - 3.700
RA150-36 3600 25 1 P.O.A - 4.440
PVCTRIM PVC finish trim to create custom reveal sizes 3000 30 1 P.O.A - 0.110
EZY CAP™
EZY REVEAL™
* Denotes lead times and minimum order quantity may apply Page 34 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Custom finishing and capping of plasterboard is made easy with Fastcaps® range of custom made finishing sections. Our custom design and consultancy team is ready to help design and produce an innovative solution to your requirements for any size project. Fastcaps® custom finishing section make the finishing of difficult plasterboard profiles, rebates and large oversized shadowlines a dream. Enquire now for a fast solution to all your requirements.
Custom Finishing Sections
The Flush Finish Cavity Slider
Standard Cavkit
Optional Cavkit
Cavkit can be used to transform standard cavity sliders into architrave free, flush finish cavity sliders. This also compliments and tones in with the Ezyjamb® flush finish door jamb system. The Cavkit is made up of Ezyreveal® and Ezycap® to trim and cap the plaster edges around the door penetration. Custom made closer cap can be produced to suit any specification. For more information visit the Ezyjamb website: www.ezyjamb.com.au
Custom Shadowline
Custom Rebates & Profiles
X Y
X ≤ Y
Custom Sizes Manufactured to your project requirements
* Denotes lead times and minimum order quantity may apply Page 35 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
EZY JAMB CAVKIT*
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
* Denotes lead times and minimum order quantity may apply Page 36 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
METAL DOOR FRAMESEAZY JAMB *
* Denotes lead times and minimum order quantity may apply Page 37 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
* Denotes lead times and minimum order quantity may apply Page 38 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
(mm)
*
*
*
*
*
*
*
*
*
*
*
*
(mm)
*
*
Other Flat Bar Widths Availble on request
-
50
50
Bag
Skirting Corner Stake Grey x 100mm
Skirting Screws - 3/4 X 6g Pan Head (CSK, Z/P)
0.805
0.010
0.010
P.O.A
10
10
10
-
-
1
1
1.880
2.420
2.420
0.805
P.O.A
P.O.A
P.O.A
P.O.A
200
200
200
-
2750
3600
2800
100m
150mm Skirting 10µm Clear Anodised x 2.75m
150mm Skirting 10µm Clear Anodised x 3.6m
150mm Skirting Satin Black x 2.75m
AS01527A
AS01536A
AS01527PB
Moulded Infill Tape Black x 100m Roll
20 1 P.O.A
No.
AS009XPKB
AS009XPKG
AS346GP
ASIMRLB
ASIMRLG
100
100
-
100m13mm Cover Tape Grey x 100m Roll
Skirting Corner Stake Black x 100mm
P.O.A
P.O.A.
P.O.A
100
1.260AS00927PB 100mm Skirting Satin Black x 2.75m 2750 200 10 P.O.A
AS00936PB 3600 P.O.A100mm Skirting Satin Black x 3.6m 10200 1.620
ALUMINIUM PARTITION SYSTEMSPart
SKIRTINGLENGTH STOCK SUB PRICE Approx
No. PACK PACK EACH kg/pc
1.260
AS00936A 100mm Skirting 10µm Clear Anodised x 3.6m 3600 200 10 P.O.A 1.620
AS00927A 100mm Skirting 10µm Clear Anodised x 2.75m 2750 200 10 P.O.A
ALUBASE (SHADOWLINE) ALUMINIUM SKIRTING
Part
FLAT BARLENGTH STOCK SUB PRICE Approx
PACK EACH kg/pcPACK
0.300
AA2516FPB Flat Bar 25 x 1.6m Satin Black x 2.75m 2750 20 1 P.O.A 0.300
AS2516FA Flat Bar 25 x 1.6m 10µm Clear Anodised x 2.75m 2750
For full range of aluminium sections please contact Faststud Sales on 1300 88 3278
Skirting
Cover Tape
Corner Stakes
Flat Bar Skirting Screws
* Denotes lead times and minimum order quantity may apply Page 39 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
ALUMINIUM PARTITION SECTIONS
For full range of aluminium sections please contact Faststud Sales on 1300 88 3278
* Denotes lead times and minimum order quantity may apply Page 40 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
For full range of aluminium sections please contact Faststud Sales on 1300 88 3278
* Denotes lead times and minimum order quantity may apply Page 41 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
*
*
* *
*
*
*
*
* *
*
* *
* *
*
2 1
1 14 1
APMWFL3030
APMWFL4545
APMWFL6060
450 x 450 exposed flange
600 x 600 exposed flangeAPMFL6060 600 x 600 exposed flange
4 1
4 1
4 1
4 1
4 1
4 1
4 1
Part
Description
STOCK SUB
1
2 1
1 1
No. PACK PACK
4
450 x 450 set bead
600 x 600 set bead
APMWSB3030 300 x 300 set bead
2 1
2 1
4 1
4 1
2
2
1
4 1
4 1
4 1
APMTLSB2020
APMTLSB3030
200 x200 set bead
MDF -Rw33 Sound Rated
MDF -Non Rated MDF -Non Rated With Tip Latch
Part
No.
4
300 x300 exposed flange
4 1
Part
No.
300 x 300 set bead
APMTLSB4545 450 x 450 set bead
APMTLSB6060 600 x 600 set bead
Description
STOCK SUB
PACK PACK
1
1
APMWSB4545
APMWSB6060APMFL4545 450 x 450 exposed flange
APMFL4560 450 x 600 exposed flange
APMFL5555 550 x 550 exposed flange
APMSB5555 550 x 550 set bead
APMSB6060 600 x 600 set bead
APMFL2020 200 x200 exposed flange
APMFL3030 300 x300 exposed flange
APMFL4040 400 x 400 exposed flange
ACCESS PANELS
APMSB4040 400 x 400 set bead
APMSB4545 450 x 450 set bead
APMSB4560 450 x 600 set bead
STOCK SUB
PACK PACK
APMSB2020 200 x200 set bead
Description
APMSB3030 300 x 300 set bead
MDF removable door with concealed hinges & budget lock
MDF door and metal frame with concealed hinges and tip latches (Non
Rated)
Metal door with concealed hinges & budget lock
Metal door with concealed hinges & budget lock - Rw30
Custom size panels available on request
Fire rated hinged panel with budget lock
* Denotes lead times and minimum order quantity may apply Page 42 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
* *
*
* *
*
*
*
*
*
* *
*
* *
* *
*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
APTSPA3030 Steel Frame 300 x300 1 1
APTSPASS3030 Stainless Frame 300 x 300 1 1
APTSPASS4545 Stainless Frame 450 x 450 1 1
APTSPA4545 Steel Frame 450 x 450 1 1
APTSPASS2020 Stainless Frame 200 x 200 1 1
APF2FL4545 450 x 450 exposed flange 1 1
APF2FL6060 600 x 600 exposed flange 1 1
APTSPA3045 Steel Frame 300 x 450 1 1
Tile/Spa Panels
Part
Description
STOCK SUB
No. PACK PACK
APTSPA2020 Steel Frame 200 x200 1 1
APF2SB3030 300 x 300 set bead 1 1
APF2SB4545 450 x 450 set bead 1 1
Fire Rated Panels - 2 Hours
Part
Description
STOCK SUB
No. PACK PACK
APF1FL4545 450 x 450 exposed flange 1 1
APF1FL6060 600 x 600 exposed flange 1 1
APF1SB6060 600 x 600 set bead 1 1
APF1FL3030 300 x300 exposed flange 1 1
APF1SB3030 300 x 300 set bead 1 1
APF1SB4545 450 x 450 set bead 1 1
Fire Rated Panels - 1 Hour
Part
Description
STOCK SUB
No. PACK PACK
4 1APSFL6060 600 x 600 exposed flange 4 1
APSWFL6060 600 x 600 exposed flange 2 1
APSWFL4545 450 x 450 exposed flange
2 1APSFL4560 450 x 600 exposed flange 4 1
APSWFL3030 300 x300 exposed flange 4 1
APSWSB6060 600 x 600 set bead
APSFL5555 550 x 550 exposed flange 4 1
4 1APSFL4040 400 x 400 exposed flange 4 1
APSWSB4545 450 x 450 set bead 4 1
APSWSB3030 300 x 300 set bead
APSFL4545 450 x 450 exposed flange 4 1
200 x200 exposed flange 4 1
No. PACK PACK
Metal -Rw30 Sound RatedAPSSB6060 600 x 600 set bead 4 1
Part
Description
STOCK SUBAPSFL2020
APSFL3030 300 x300 exposed flange 4 1
APSSB4560 450 x 600 set bead 4 1
APSSB5555 550 x 550 set bead 4 1
4 1
APSSB4545 450 x 450 set bead 4 1 APSTLSB6060 600 x 600 set bead 4 1
APSSB4040 400 x 400 set bead 4 1 APSTLSB4545 450 x 450 set bead
4 1
APSSB3030 300 x 300 set bead 4 1 APSTLSB3030 300 x 300 set bead 4 1
APSSB2020 200 x200 set bead 4 1 APSTLSB2020 200 x200 set bead
STOCK SUB
No. PACK PACK No. PACK PACK
Part
Description
STOCK SUB Part
Description
Metal -Non Rated Metal -Non Rated With Tip Latch
Aluminium Manhole Frames
Part
Description
STOCK SUB
No. PACK PACK
MHF6045 600 x 450 Frame 1 1
MHF6060 600 x 600 Frame 1 1
MHF3030 300 x 300 Frame 1 1
MHF4040 400 x 400 Frame 1 1
MHF4545 450 x 450 Frame 1 1
MHF12060 1200 x 600 Frame 1 1
APSSB60120 600 x 1200 set bead 1 1
APSFL60120 600 X 1200 exposed flange 1 1
11300 x300 exposed flangeAPF2FL3030
11600 x 600 set beadAPF2SB6060
MHF5555 550 x 550 Frame 1 1
TILE/SPA PANELS Fibre cement door with steel frame & recessed face to give flush
tiled finish. Hinged with screw type lock. Aluminium manhole frame.
Custom size panels available on request
* Denotes lead times and minimum order quantity may apply Page 43 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part Length Width SUB PRICE Approx Approx
No. mm mm PACK EACH $ l/m kg/piece
SEMDF6410-27 Suits 64mm stud + 10mm plaster 2700 91 1 17.54 6.50 3.800
SEMDF6413-27 Suits 64mm stud + 13mm plaster 2700 97 1 17.54 6.50 4.100
SEMDF7610-27 Suits 76mm stud + 10mm plaster 2700 103 1 21.67 8.03 4.300
SEMDF7613-27 Suits 76mm stud + 13mm plaster 2700 109 1 21.67 8.03 4.500
SEMDF9210-27 Suits 92mm stud + 10mm plaster 2700 119 1 23.75 8.80 5.000
SEMDF9213-27 Suits 92mm stud + 13mm plaster 2700 125 1 23.75 8.80 5.500
Part Length STOCK SUB PRICE Approx Approx
No. m PACK PACK EACH $ l/m kg/piece
TPMASK599 No. 599 High Temperature Masking Tape 48mm x 50m 50 20 1 9.60 - 0.350
TPM5090 Easy Tape - 50mm Self Adhesive Fibreglass 90 24 1 6.95 - 0.350
TPP5075 Paper Tape - 50mm Perforated 75 20 1 3.08 - 0.600
TPP50150 Paper Tape - 50mm Perforated 150 10 1 6.22 - 0.900
INFT4850R Aluminium Foil Tape 48mm x 50m roll 50 24 1 P.O.A - 0.198
INFT5050B No.400F FOIL TAPE Aluminium Foil 48mmx50m with backing 50 24 1 P.O.A - 0.290
INFT7550R No.939 REINFORCED FOIL TAPE 72mm x 50m roll (1/16)^ 50 16 1 P.O.A - 0.290
TPFE3-48 EPDM Foam Tape - Adhesive 3.2mm (Express Wall Vertical Gasket) 25 5 1 P.O.A - -
TPFN3-18 * PVC Nitrile Foam Tape - Adhesive (Express Wall Horizontal Gasket) 9 16 1 P.O.A - -
TPFP6-60 PVC Foam Tape - Adhesive 6mm x 60mm x 15.2m Roll 15.2 8 1 P.O.A - -
Part SUB PALLET PRICE Approx
No. PACK PACK QTY EACH kg/piece
BOR-BC45 Boral - Base Cote 45 - 20kg bag 1 1 56 P.O.A 20
BOR-BC60 Boral - Base Cote 60 - 20kg bag 1 1 56 P.O.A 20
BOR-FCOTE20 Boral - FINALCOTE - (Top coat) - 20kg bucket 1 1 48 P.O.A 20
BOR-CA6020 Boral - Cornice Adhesive 60 - 20kg bag 1 1 56 P.O.A 20
BOR-MA20 1 1 56 P.O.A 20
PLASTERING ACCESSORIES & TOOLSMDF STOP ENDS
TAPES
PLASTERBOARD COMPOUNDS
Boral - Masonry Adhesive - 20kg bag
Easy Tape Paper Tape Foam Tape Foil Tape Masking Tape
OTHER PLASTERBOARD COMPOUNDS AVAILABLE. PLEASE CONTACT FASTSTUD FOR DETAILS.
* Denotes lead times and minimum order quantity may apply Page 44 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part STOCK SUB PRICE Approx
No. PACK PACK EACH kg/piece
BOSULTRA Bostik Ultra Grip stud adhesive 5.2kg bucket 1 1 P.O.A 5.200
BOSFIREB1 Bostik - Fireban One Limestone 600ml Sausage 20 1 P.O.A 0.950
BOSFIREC Bostik - Firecaulk Limestone 600ml Sausage 20 1 P.O.A 0.950
BOSGAP Bostik - GAP Seal 450g cartridge 20 1 P.O.A 0.950
BOSGNOZ Bostik - Sausage gun nozzle white - pack of 10 10 1 P.O.A 0.950
BOSGUN * Bostik - 600ml Sausage Barrel Gun 1 1 P.O.A 0.950
BOSNONAIL-320 * Bostik -No More Nails 320gm Cartridge 20 1 P.O.A 1.092
BOSPUCG * Bostik - PU Construction Grey 600ml sausage 20 1 P.O.A 1.092
BOSSNF1BLK * Bostik - Seal n Flex 1 Black 600ml Sausage # 20 1 P.O.A 1.092
BOS5CLM-C * Bostik - 5CLM Silicone 300ml Cartridge - Black Charcoal # 15 1 P.O.A -
BOSBOG1KG * Bostik - Builders Bog 1kg Pail 6 1 P.O.A 1.000
BOSBRO10 * Bostik - Open Cell Backing Rod 10mm x 210m - Orange # 1 1 P.O.A -
BOSHANDI * Bostik - Handi Clean Towels Wipes 90/pk 6 1 P.O.A 5.200
#Other colours available
PASACG1 Cartridge Caulking Gun "Little Red" for 300ml cartridges 1 1 P.O.A 0.520
PASA750 Fuller 750 Multi Purpose translucent Silicone 300g 20 1 P.O.A 0.370
PASAFSS Fuller Firesound Acrylic Sealant Sausage 600ml Grey 15 1 P.O.A 0.950
PASAFFR * FULAFOAM Fire Retardent Expanding Foam 500g 12 1 P.O.A 0.630
PASAFF500 * FULAFOAM - Triple Expanding 500ml 12 1 P.O.A 0.628
PASAGF * Fuller Gap Filler White 450g 20 1 P.O.A 0.510
PASAMAX * Max Bond Adhesive Cartridge 320g 20 1 P.O.A 0.370
PASAMAXFGS * Max Bond Fast Grip Adhesive Sausage 600ml 15 1 P.O.A 0.960
FULTOOLSW Fuller TOOLBOX White - 500ml Sausage # 20 1 P.O.A 0.743
#Other colours available
SIKAPROSB Sikaflex Pro - PU Joint Sealant 600ml Sausage Black # 20 1 P.O.A 0.950
SIKA11FCSB * Sikaflex 11FC-Fast Curing PU Sealant 600ml Sausage Black # 20 1 P.O.A 0.950
SIKABRO10 * Sika Foam Backing Rod (Open Cell) 10mm x 210m Roll 1 1 P.O.A 1.092
SIKABRO16 * Sika Foam Backing Rod (Open Cell) 15mm x 150m Roll 1 1 P.O.A 1.092
SIKAABRO22 * Sika Foam Backing Rod (Open Cell) 20mm x 100m Roll 1 1 P.O.A 1.120
SIKAFIREPU * Sika Firerate - PU Fire Resistant Sealant Sausage 600ml 12 1 P.O.A 0.940
SIKAFIREAC * Sika Firerate -Acrylic Sausage 600ml Grey 12 1 P.O.A 0.950
#Other colours available
SEALANTS & ADHESIVES
Cartridge Caulking Gun
Backing Rod
Sausage Caulking
Gun
Stud Adhesive
* Denotes lead times and minimum order quantity may apply Page 45 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part STOCK SUB
No. PACK PACK
PASP100 Sandpaper Sheet Small (85 x 305mm) 120 grit - Pack of 20 25 20
PASP101 Sandpaper Sheet Small (85 x 305mm) 150 grit - Pack of 20 25 20
PASP102 Sandpaper Sheet Small (85 x 305mm) 180 grit - Pack of 20 25 20
PASP103 * Sandpaper Sheet Large (110 x 370mm) 120 grit - Pack of 20 25 20
PASP104 * Sandpaper Sheet Large (110 x 370mm) 150 grit - Pack of 20 25 20
PASP105 * Sandpaper Sheet Large (110 x 370mm) 180 grit - Pack of 20 25 20
PASP200 Super Pads 225mm x 120 grit - Pack of 5 20 5
PASP201 Super Pads 225mm x 150 grit - Pack of 5 20 5
PASP202 Super Pads 225mm x 180 grit - Pack of 5 20 5
PASP203 Super Pads 225mm x 220 grit - Pack of 5 20 5
PASP300 Sanding Block Small Fine/Med 110 x 68 x 26mm 12 1
PASP301 * Sanding Block Small Med/Coarse 110 x 68 x 26mm 10 1
PASP305-10 * Sanding Block Angled Fine/Med 125 x 70 x 25mm 10 1
PASP308 * Sanding Block Jumbo Fine/Med 225 x 76 x 25mm 100 1
PASP310 * Sanding Sponge Fine 140mm x 115mm x 5mm 50 1
Part STOCK SUBNo. PACK PACK
PATLS001 * Hand Sander Small Plastic 230mm 10 1
PATLS002 * HYDE Hand Sander Polypropylene Base 230mm 5 1
Part STOCK SUB
No. PACK PACK
PAPENCIL Carpenters Pencil Medium Lead 50 1
PATM1 Sterling V-Force 25mm x 8m 25 8
PATM2 Faststud Plaster X Magnetic Tip 25mm x 10m 25 10
Part SUB
No. PACK
PATLTSG * Aviation Tin Snips - Right Cut - GREEN 1
PATLTSR * Aviation Tin Snips - Left Cut - RED 1
PATLTSY Aviation Tin Snips - Straight Cut - YELLOW 1
Part SUB
No. PACK
PATLSCI * Intex Stud Crimper 1
PATLSCL * Builders Edge Stud Crimper - Long Handle 1
PATLSP * Stud Punch - Punches a 34mm service hole in studs. 1
PATLSPG1 * Stud Punch Insert- Easy Snap in Grommet-Pack 100 100
Part SUB
No. PACK
FLOORCARP1 Carpet Saver Self Stick 1m x 100m 1
FLOORCARPA * Carpet Saver Aplicator Tool 1
FLOORPOLY1 * Polyweave Floor and Carpet Protection 1.83m x 100m 1
FLOORPOLY2 * Polyweave Floor and Carpet Protection 4m x 50m 1
FLOORSAVE1 Hard Floor Self Stick 1m x 100m 1
ABRASIVES
HAND SANDERS
PENCILS & TAPE MEASURES
TIN SNIPS
STUD CRIMPERS & HOLE PUNCH
DROP SHEETS AND FLOOR SAVERS
PATLSPG1
PATLTS
PATLS002
PATLS001
PASP308
PASP300
PASP305
PASP310
PASP2
PASP1
PATM2 with Magnetic
Tip
PATM1
FLOORCARP1
FLOORPOLY1
PATLSCI
PATLSP
* Denotes lead times and minimum order quantity may apply Page 46 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part SUB
No. PACK
PATLRG1 * Riveting Tool 1
Part SUB
No. PACK
PATLBC350 Bolt Cutters 350mm 1
PATLBC450 * Bolt Cutters 450mm 1
Part SUB
No. PACK
PATLKN1 Shark Fixed Trimming knife 1
PATLKN2 Plastic Cutter 18mm with snap off blade 1
PATLKN3 * Folding QuickLoc Knife with rubber grip and belt clip 1
PATLKNB1 Blades - Trimming Knife - Dispenser of 10 10
PATLKNB3 * Heavy Duty Trimming Knife Blades - Pack of 100 100
STER550-660 * Sterling T-Rex 6/150mm Hardpoint Drywall Saw 1
STER550-770 * Sterling T-Rex 22/550mm Hand Saw 1
GTPZD066455 * Insulation Knife Cutter 300mm Long, Teeth both sides EDMA 1
Part SUB
No. PACK
STRRAT25-5 Ratchet Strap Light Duty 25mm x 5.0m 1
STRRAT50-9 * Ratchet Strap Heavy Duty 50mm x 9.0m - Rated to 2500kg 1
Part SUB
No. PACK
PAPC1 Plasterboard Cart - DC1350 1
The DC1350 Plasterboard Cart has a strong A-Frame designed to carry up to 1350kg. It boasts two lockable
castor wheels offering exceptional maneuverability and dismantles to fit in the boot of most cars. `
Part SUB
No. PACK
GTPLT * Landing Trolley 1200kg, Aluminium 600 x 600 1
SUB
PACK
DM1 Mask - P1 Without Valve - Pack of 10 10
PPEMASK2 DM2 Mask - P2 With Valve - Pack of 10 10
PPESPEC1 UVEX Safety Specs - Clear 1
PPESPEC2 UVEX Pheos Safety Specs - Tinted 1
PPESPEC3 UVEX Pheos Safety Specs Blk/Org SCT Lens 1
PPEHHATW * Hard Hat 410 White 1
PPEGLOVRIGGER Gloves Leather Riggers Warrior - S/M/L/XL 1
PPEGLOVCONTRACT Glove Nitrile Ultratech Foam W967 3B - S/M/L/XL 1
PPEGLOVSTG001 * StudcoTough Drywallers Glove - M/L/XL 1
PPEGLOVUNIDUR Uvex UnidurGlove Cut 5 - Size 7/8/9/10/11 1
PPEGLOVCLIP Uniform Glove Clip - Poly Black 1
PPEEARPLUGS Earplugs Prosoft L4 EPPSR (200/Box) 1
PPEOVERALL Coverall Micromax NS AMN428E White - M/L/XL/2XL 1
SAFETY GEAR
PLASTERBOARD/HEBEL®/AAC CART
RIVETING TOOL
BOLT CUTTERS
SAWS, KNIVES & BLADES
RATCHET STRAPS
PLASTERBOARD CART
Heavy Duty 1,200kg load capacity made out of lightweight and durable aluminium frame, rolls on 4 x 125mm
castors for easy and safe maneuvering. Used to transport plasterboard or other materials on site.
PATLKNB1
PATLKN2
PATLKN1
PATLKN3
Dust Masks
PATLRG1
PATLBC350
DC-1350
PATLKNB3
Ratched Straps
GTPLT
EDMA Knife
* Denotes lead times and minimum order quantity may apply Page 47 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
*
*
*
*
*
*
*
*
*
*
Gorilla - Wheel kit to suit Gorilla platform ladders
Gorilla Aluminium Adjustable Platform 120kg - 390mm wide
GORPLWHEEL
SCSN01 Collapsable Scaffolding Kit
Gorilla - Dual Purpose Double Sided Aluminium ladder 150kg
Gorilla - Aluminium tray to fit Gorilla platform ladders
Gorilla - Platform ladder Aluminium 0.9m (3ft) 150kg
Gorilla - Platform ladder Aluminium 1.2m (4ft) 150kg
Gorilla - Platform ladder Aluminium 1.8m (6ft) 150kg
GORDM007-I
GORPL006
GORPL004
GORPL003
GORPLTRAY
1 42.00
SCSN02 Hand Rail for Collapsable Scaffold 1 3.00
1
20.90
12.16
1
1
1
3.00
14.80
16.601
1
LADDERS & PLATFORMS
8.62
8.00
3.00
Part
Ladders and PlatformsSub Approx
No. Pack kg/piece
GORMW105-I450 1
1GORMW105-WB
Gorilla Adjustable Aluminium Platform 150kg - 450mm wide
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
SCSN01
Collapsable Scaffold Kit
GORPL03 GORPL04 GORPL06
GORMW105
GORMW105-I450
* Denotes lead times and minimum order quantity may apply Page 48 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
BUTTON HEAD FINE NEEDLE POINT STITCHING SCREW ZP
SDBT0813 * 8g x 13 1000 - P.O.A 1.640
SDBT0816 8g x 16 1000 - P.O.A 1.740
SDBT0825 * 8g x 25 1000 - P.O.A 2.560
SDBT0832 * 8g x 32 1000 - P.O.A 3.100
BUTTON HEAD FINE SELF DRILLING SCREW ZP
SDBTD0812 8g x 12 1000 - P.O.A 1.600
SDBTD0816 * 8g x 16 1000 - P.O.A 1.900
SDBTD0825 * 8g x 25 1000 - P.O.A 2.510
SDBTD0830 * 8g x 30 1000 - P.O.A 3.100
PANCAKE (FLAT TOP) HEAD SELF DRILLING SCREW ZP
SDFTD1016 10g x 16 1000 - P.O.A 1.460
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
BUGLE HEAD FINE NEEDLE POINT DRYWALL SCREW ZP
SDBG0625 6g x 25 1000 - P.O.A 1.350
SDBG0632 6g x 32 1000 - P.O.A 1.600
SDBG0641 * 6g x 41 1000 - P.O.A 2.000
SDBG0645 * 6g x 45 1000 - P.O.A 2.200
SDBG0751 7g x 51 1000 - P.O.A 2.800
SDBG0865 8g x 65 500 - P.O.A 2.100
SDBG0875 8g x 75 500 - P.O.A 2.450
SDBG10100 * 10g x 100 500 - P.O.A 2.300
BUGLE HEAD FINE SELF DRILLING DRYWALL SCREW ZP
SDBGD0625 6g x 25 1000 - P.O.A 1.500
SDBGD0632 6g x 32 1000 - P.O.A 1.830
SDBGD0645 6g x 45 1000 - P.O.A 2.500
BUGLE HEAD COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)
SPBG1040L * 10g x 40 1000 - P.O.A 3.546
SPBG1050L 10g x 50 1000 - P.O.A 4.320
SPBG1065L 10g x 65 1000 - P.O.A 3.012
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
COLLATED BUGLE HD. FINE NEEDLE POINT DRYWALL SCREW ZP
SDBGC0625 6g x 25 1000 - P.O.A 1.610
SDBGC0632 6g x 32 1000 - P.O.A 1.910
SDBGC0641 6g x 41 1000 - P.O.A 2.300
COLLATED BUGLE HD. FINE SELF DRILLING DRYWALL SCREW ZP
SDBGCD0625 6g x 25 1000 - P.O.A 1.610
SDBGCD0632 6g x 32 1000 - P.O.A 1.910
SDBGCD0641 6g x 41 1000 - P.O.A 2.300
COLLATED BUGLE HD. COARSE NEEDLE POINT DRYWALL SCREW ZP
SDBGC0625C 6g x 25 1000 - P.O.A 1.610
SDBGC0632C 6g x 32 1000 - P.O.A 1.910
SDBGC0641C 6g x 41 1000 - P.O.A 2.300
COLLATED BUGLE HD. COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)
SDBGC1040L * 10g x 40 500 - P.O.A 3.456
FASTENERSFRAMING SCREWS
PLASTERBOARD SCREWS - LOOSE
PLASTERBOARD SCREWS - COLLATED
* Denotes lead times and minimum order quantity may apply Page 49 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
CSK. SELF EMBEDDING FINE NEEDLE POINT VILLABOARD (FIBRE CEMENT) SCREW ZP
SVCS0820 8g x 20 1000 - P.O.A 1.460
SVCS0830 8g x 30 1000 - P.O.A 2.270
CSK. SELF EMBEDDING FINE SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW ZP
SVCSD0820 8g x 20 1000 - P.O.A 1.700
SVCSD0825 * 8g x 25 1000 - P.O.A 1.920
SVCSD0830 8g x 30 1000 - P.O.A 2.260
CSK. SELF EMBEDDING FINE SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW GAL. CLASS 3
SVCSD0820G * 8g x 20 1000 - P.O.A 1.740
SVCSD1030G 10g x 30 1000 - P.O.A 2.260
CSK. SELF DRILLING FINE BLUEBOARD (FIBRE CEMENT) WINGTEK SCREW, GAL. CLASS 3
SVCSD0832GW 8g x 32 1000 - P.O.A 2.320
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
CSK. SELF EMBEDDING NEEDLE PT FINE VILLABOARD / FIBRE CEMENT SCREW
SVCSC0820 8g x 20 1000 - P.O.A 1.730
SVCSC0830 8g x 30 1000 - P.O.A 2.330
CSK. SELF EMBEDDING DRILL PT VILLABOARD / FIBRE CEMENT SCREW
SVCSCD0820 8g x 20 1000 - P.O.A 1.689
SVCSCD0830 * 8g x 30 1000 - P.O.A 2.596
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
SELF DRILLING SCREW HEX HEAD ZP CLASS 2
(All screws fully threaded unless otherwise noted)
SRHD0820 * 8g-18 x 20 1000 - P.O.A 2.280
SRHD1016 10g-16 x 16 1000 - P.O.A 3.130
SRHD1020 * 10g-20 x 20 1000 - P.O.A 3.300
SRHD1220 * 12g-24 x 20 1000 - P.O.A 4.750
SELF DRILLING SCREW HEX HEAD GAL. CLASS 3
(All screws fully threaded unless otherwise noted)
SRHD0812G * 8g-18 x 12 1000 - P.O.A 1.800
SRHD1016G 10g-16 x 16 1000 - P.O.A 3.070
SRHD1020G * 10g-16 x 20 1000 - P.O.A 3.390
SRHD1025G 10g-16 x 25 1000 - P.O.A 3.880
SRHD1220G 12g-14 x 20 1000 - P.O.A 4.750
SRHD1235G 12g-14 x 35 500 - P.O.A 3.420
SRHD1245G 12g-14 x 45 500 - P.O.A 4.250
SRHD1275G 12g-14 x 75 (part threaded) 200 - P.O.A 2.170
TYPE 17 SCREW HEX HEAD GAL. CLASS 3
SPH1225G * 12g-11 x 25 1000 - P.O.A 5.630
SPH1250G * 12g-11 x 50 500 - P.O.A 7.760
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
SELF DRILLING EXTENDED DRILL POINT HEX HEAD GAL. CLASS 3 SCREW
(All screws fully threaded)
SRHDE1232G 12g-24 x 32 500 - P.O.A 3.330
SRHDE1250G 12g-24 x 50 500 - P.O.A 4.440
SRHDE1265G 12g-24 x 65 250 - P.O.A 2.850
ROOFING SCREWS
FIBRE CEMENT SCREWS - LOOSE
FIBRE CEMENT SCREWS - COLLATED
EXTENDED DRILL POINT SCREWS - SERIES 500
All sizes also available with Neoprene Washer
All sizes also available with Neoprene Washer
* Denotes lead times and minimum order quantity may apply Page 50 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
Hooked Rod Suspension Anchor
CSA6-60 * 6mm x 60mm 100 - P.O.A 1.140
CSA6-120 6mm x 120mm 100 - P.O.A 2.530
Threaded Rod Suspension Anchor
CSA6-60-T6 M6 Thread - 6mm x 60mm 100 - P.O.A 1.858
Drive Pin Suspension Angle Bracket
BRDP * 25mm x 30mm 100 - P.O.A. 1.402
Part SUB SUB PRICE Approx
No. PACK PACK EACH kg/piece
SRB06Z1 * M6 Booker Rod - Fully Threaded Zinc Plated x 1.0m 10 - P.O.A 1.800
SRB06Z3 * M6 Booker Rod - Fully Threaded Zinc Plated x 3.0m 10 - P.O.A 5.000
SRB08Z1 * M8 Booker Rod - Fully Threaded Zinc Plated x 1.0m 10 - P.O.A 3.000
SRB08Z3 * M8 Booker Rod - Fully Threaded Zinc Plated x 3.0m 10 - P.O.A 9.000
SRB10Z1 * M10 Booker Rod - Fully Threaded Zinc Plated x 1.0m 10 - P.O.A 5.000
SRB10Z3 * M10 Booker Rod - Fully Threaded Zinc Plated x 3.0m 10 - P.O.A 14.500
SRB12Z1 * M12 Booker Rod - Fully Threaded Zinc Plated x 1.0m 5 - P.O.A 3.500
SRB12Z3 * M12 Booker Rod - Fully Threaded Zinc Plated x 3.0m 5 - P.O.A 10.500
SRB16Z1 * M16 Booker Rod - Fully Threaded Zinc Plated x 1.0m 5 - P.O.A 6.300
SRB16Z3 * M16 Booker Rod - Fully Threaded Zinc Plated x 3.0m 5 - P.O.A 19.000
SRB20Z1 * M20 Booker Rod - Fully Threaded Zinc Plated x 1.0m 5 - P.O.A 10.000
SRB20Z3 * M20 Booker Rod - Fully Threaded Zinc Plated x 3.0m 5 - P.O.A 30.000
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
N-M06 * M6 Nuts ZP 100 Box 100 - P.O.A 0.230
N-M08 * M8 Nuts ZP 100 Box 100 - P.O.A 0.680
N-M10 * M10 Nuts ZP 100 Box 100 - P.O.A 0.930
N-M12 * M12 Nuts ZP 100 Box 100 - P.O.A 1.320
N-M16 * M16 Nuts ZP 100 Box 100 - P.O.A 1.580
N-M20 * M20 Nuts ZP 100 Box 100 - P.O.A 1.750
SSH-M10-25 * Set Screw (BOLT) M10 x 25mm ZP Hex Head - For framing brackets 150 - P.O.A 4.160
W1024 Washer 10 X 24 Zinc Plated - For framing brackets 100 - P.O.A 0.492
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
PATLSTS08 Staples 8mm Box of 2000 2000 - P.O.A -
PATLSTS10 Staples 10mm Box of 2000 2000 - P.O.A 0.274
PATLSTGS Staples Gun Heavy Duty "sheffield" 1 - P.O.A -
PATLSTG2 Sterling HD Staple Hammer Tacker 1 - P.O.A -
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
MBH065-56G Sleeve Anchor 6.5 x 56 Gal.(M5) 100 - P.O.A 1.342
MBH08-40G Sleeve Anchor 8 x 40 Gal.(M6) 100 - P.O.A 1.536
MBH08-65G * Sleeve Anchors 8 x 65 Gal.(M6) 50 - P.O.A 1.820
MBH10-60G Sleeve Anchors 10 x 60 Gal.(M8) 50 - P.O.A 1.920
MBH10-77G * Sleeve Anchors 10 x 77 Gal.(M8) 50 - P.O.A 2.480
MBH12-75G Sleeve Anchors 12 x 75 Gal. (M10) 50 - P.O.A 3.500
CEILING SUSPENSION ANCHORS
BOOKER ROD
METRIC BOLTS, NUTS & WASHERS
STAPLES
MASONRY SLEEVE ANCHORS
* Denotes lead times and minimum order quantity may apply Page 51 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
MA25 6.5mm x 25 100 - P.O.A 0.900
MA30S * 6.0mm x 30 Stainless Pin 100 - P.O.A 0.874
MA32 6.5mm x 32 100 - P.O.A 1.150
MA32S * 6.5mm x 32 Stainless Pin 100 - P.O.A 1.000
MA40 6.5mm x 40 100 - P.O.A 1.140
MA50 6.5mm x 50 100 - P.O.A 1.380
MA75 * 6.5mm x 75 100 - P.O.A 1.950
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
NPM6.5-25 6.5mm x 25 100 - P.O.A 0.270
NPM6.5-40 6.5mm x 40 100 - P.O.A 0.380
NPM6.5-50 6.5mm x 50 100 - P.O.A 0.480
NPM6.5-75 6.5mm x 75 100 - P.O.A 0.810
NPM6.5-100 6.5mm x 100 50 - P.O.A 0.610
Part PACK SUB PRICE Approx
No. QTY PACK EACH kg/piece
FWPR50 6mm x 50 RED 50 - P.O.A 0.070
FWPG50 7mm x 50 GREEN 50 - P.O.A 0.090
FWPB50 8mm x 50 BLUE 50 - P.O.A 0.110
Part BOX SUB PRICE Approx
No. QTY PACK EACH kg/piece
RIV1 1/8" x 4.8mm 1000 - P.O.A 1.060
RIV2 1/8" x 6.4mm 1000 - P.O.A 1.040
RIV3 1/8" x 8.0mm 1000 - P.O.A 1.060
RIV4 1/8" x 9.6mm 1000 - P.O.A 1.130
DBJHD1/8Drill Bit- 1/8 Rivet Bits Double End
Pack of 1010 - P.O.A. 0.032
PATLRG1 Riveting Tool 1 - P.O.A 0.530
Part STOCK SUB PRICE Approx
No. PACK PACK EACH kg/piece
DB6-110 * Carbide Tip SDS Multi 6mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.040
DB6-160 * Carbide Tip SDS Multi 6mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.050
DB6-210 * Carbide Tip SDS Multi 6mm x 210 (suits 150mm drilling depth) - 1 P.O.A 0.050
DB6.5-110 * Carbide Tip SDS Multi 6.5mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.040
DB6.5-160 * Carbide Tip SDS Multi 6.5mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.040
DB8-110 * Carbide Tip SDS Multi 8mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.040
DB8-160 * Carbide Tip SDS Multi 8mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.050
DB8-210 * Carbide Tip SDS Multi 8mm x 210 (suits 150mm drilling depth) - 1 P.O.A 0.066
DB10-110 * Carbide Tip SDS Multi 10mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.054
DB10-160 * Carbide Tip SDS Multi 10mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.064
DB12-160 * Carbide Tip SDS Multi 12mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.074
DB12-210 * Carbide Tip SDS Multi 12mm x 210 (suits 150mm drilling depth) - 1 P.O.A 0.097
DB12-260 * Carbide Tip SDS Multi 12mm x 260 (suits 200mm drilling depth) - 1 P.O.A 0.120
Part SUB PRICE Drill.
No. PACK EACH Dia. Depth
DBCS5Shallow Cut Masonry Drill bit with
Counter Sink Depth Gauge1 P.O.A 5mm 9mm
NAIL IN PLUG - NYLON
WALL PLUGS
RIVETS
MASONRY MULTI FIT DRILL BITS
FIBRE CEMENT DRILL BIT
METAL PIN ANCHOR
Drill size required 6.5mm
Drill size required 6.5mm
* Denotes lead times and minimum order quantity may apply Page 52 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part SUB PRICE Approx
No. PACK EACH kg/piece
PHILLIPS SCREWDRIVER BITSBITPS225 * No.2 x 25 (screw gun tips) 1 P.O.A 0.005
BITPS250 No.2 x 50 1 P.O.A 0.011
BITPS275 No.2 x 75 1 P.O.A 0.016
BITPS2100 * No.2 x 75 1 P.O.A 0.021
PHILLIPS DRYWALL BITSBITPSD225 No.2 x 25 (with stopper) 1 P.O.A 0.014
HEX SOCKET INSERT BITBITHI550 Hex Socket Insert Bit 5mm x 50mm 1 P.O.A 0.010
MAGNETIC HEX SOCKETSBITMHL1/4 65mm long for 1/4" Hex Head Screws 1 P.O.A 0.030
BITMHL5/16 65mm long for 5/16" Hex Head Screw 1 P.O.A 0.030
BITMHL3/8 65mm long for 3/8" Hex Head Screws 1 P.O.A 0.030
BITMHS1/4 * 42mm long for 1/4" Hex Head Screws 1 P.O.A 0.016
BITMHS5/16 * 42mm long for 5/16" Hex Head Screw 1 P.O.A 0.020
BITMHS3/8 * 42mm long for 3/8" Hex Head Screws 1 P.O.A 0.020
MAGNETIC BIT HOLDERBITMBH Two piece 1/4" x 54mm long 1 P.O.A 0.010
Part SUB PRICE Approx
No. PACK EACH kg/piece
CW100-16S *Steel Slimline 100mm x 16mm Bore x
1mm Thick1 P.O.A 0.020
CW125-22 Steel 125mm x 22mm Bore 1 P.O.A 0.085
CW230-22 * Steel 230mm x 22mm Bore 1 P.O.A 0.284
CW350-25 Steel 350mm x 25mm Bore-H/S 1 P.O.A 0.700
Part SUB PRICE Approx
No. PACK EACH kg/piece
CWG100-16Metal Grinding Wheel-Depressed
Centre 100mm x 16mm Bore1 P.O.A 0.120
CWG230-22Metal Grinding Wheel-Depressed
Centre 230mm x 22mm Bore1 P.O.A 0.600
Part SUB PRICE Approx
No. PACK EACH kg/piece
INT5TB184 Intex Fibre Cement turbo Blade 1 P.O.A 0.440
JH-BL185 James Hardie Saw Blade 185mm 1 P.O.A 0.440
JH-BL254 James Hardie Saw Blade254mm 1 P.O.A 0.440
10
10
10
10
10
10
10
10
STOCK
PACK
10
10
10
STOCK
PACK
10
10
GRINDING WHEELS
STOCK
PACK
10
10
10
10
10
10
BITS - PHILLIPS & HEX
CUT OFF WHEELS
FIBRE CEMENT CUTTING BLADESSTOCK
PACK
10
10
10
* Denotes lead times and minimum order quantity may apply Page 53 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part SUB PRICE Approx
No. PACK EACH kg/piece
RAMTF1200 * Trackfast Gas Tool 1 P.O.A 6.800
RAMTFBAT12 * Trackfast Battery 1 P.O.A 0.270
RAMTFGAS Trackfast Fuel Cell - Long 1 P.O.A 0.090
RAMTF15 Trackfast 15mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.280
RAMTF19 Trackfast 19mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.600
RAMTF25 * Trackfast 25mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.708
RAMTF32 Trackfast 32mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.800
Part SUB PRICE Approx
No. PACK EACH kg/piece
RAMTM * Trackmaster Pulsa Gas Tool 1 P.O.A 3.700
RAMTMBAT * Trackmaster Battery Pack 1 P.O.A 0.060
RAMTMGAS * Trackmaster Fuel Cell - Short 1 P.O.A 0.090
RAMTM15 Trakmaster 15mm Pins Box 500 with short fuel cell 500 P.O.A 0.656
RAMTM20 Trakmaster 20mm Pins Box 500 with short fuel cell 500 P.O.A 0.690
Part SUB PRICE Approx
No. PACK EACH kg/piece
RAMT3IF * Ramset Insulfast GT3 Gas Fixing Tool 1 P.O.A 0.660
RAMT3IG6100 * 100mm Insulfast GT3 WHITE Insulation Fastener in box of 200 200 P.O.A 2.640
RAMT3IG625 * 25mm Insulfast GT3 WHITE Insulation Fastener in box of 400 400 P.O.A 0.660
RAMT3IG625B * 25mm Insulfast GT3 BLACK Insulation Fastener in box of 400 400 P.O.A 0.660
RAMT3IG625G * 25mm Insulfast GT3 GREY Insulation Fastener in box of 400 400 P.O.A 0.660
RAMT3IG638 * 38mm Insulfast GT3 WHITE Insulation Fastener in box of 350 350 P.O.A 0.660
RAMT3IG638G * 38mm Insulfast GT3 GREY Insulation Fastener in box of 350 350 P.O.A 0.660
RAMT3IG650 * 50mm Insulfast GT3 WHITE Insulation Fastener in box of 300 300 P.O.A 0.660
RAMT3IG650B * 50mm Insulfast GT3 BLACK Insulation Fastener in box of 300 300 P.O.A 0.660
RAMT3IG675 * 75mm Insulfast GT3 WHITE Insulation Fastener in box of 250 250 P.O.A 0.660
RAMT3IG675B * 75mm Insulfast GT3 BLACK Insulation Fastener in box of 250 250 P.O.A 0.660
-
STOCK
BOX
BOX
BOX
-
-
-
BOX
BOX
PACK
BOX
BOX
BOX
BOX
BOX
BOX
BOX
STOCK
PACK
-
-
-
-
-
-
RAMSET TRAKFAST™STOCK
PACK
RAMSET TRAKMASTER™
-
RAMSET INSULFAST™
Use the correct Pins for your application
15mm Pins - For fixing track to steel 19mm Pins - For fixing track to concrete
* Denotes lead times and minimum order quantity may apply Page 54 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Part LENGTH STOCK SUB PRICE Approx Approx
No. (mm) PACK PACK EACH $ l/m kg/piece
HEBEL/AAC SLOTTED ANGLESBAS7550-115-24 75 x 50 x 1.15mm BMT 2400 200 1 P.O.A P.O.A 3.270
BAS5050-075-24 50 x 50 x 0.75mm BMT 2400 500 1 P.O.A P.O.A 1.486
HEBEL/AAC TRACK76HDHT30 Track 50mm x 76mm x 50mm x 0.75mm (for 75mm Hebel Powerpanel) 3000 50 10 25.13 8.38 3.210
HEBEL/AAC TOPHATTHB24-042-48 24mm x 0.42 BMT (cyclonic) 4800 200 1 15.96 3.33 1.800
THB24-042-61 24mm x 0.42 BMT (cyclonic) 6100 200 1 20.23 3.32 2.290
THB35-055-48 * 35mm x 0.55 BMT 4800 100 5 P.O.A P.O.A 2.892
THB35-055-60 * 35mm x 0.55 BMT 6000 100 5 P.O.A P.O.A 3.616
THB40-055-60 * 40mm x 0.55 BMT 6000 100 5 P.O.A P.O.A 4.620
Part STOCK SUB PRICE Approx
No. PACK PACK EACH kg/piece
SPBG1040L * 10g x 40 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 3.546
SPBG1050L 10g x 50 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 4.320
SPBG1065L 10g x 65 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 3.012
-
SPH1225G * 12g-11 x 25 Hex Head Gal. Class 3 - 1000 P.O.A 5.630
SPH1265G * 12g-11 x 65 Hex Head Gal. Class 3 - 1000 P.O.A 12.300
SPH1465G * 14g-10 x 65 Hex Head Gal. Class 3 - 250 P.O.A 14.000
SPH14150G * 14g-10 x 150 Hex Head Gal. Class 3 - 250 P.O.A 7.100
SPBG14100G *14g-10 x 100 Countersunk Self
Embedding Head. Gal. Class 3- 500 P.O.A 9.200
SPBG14150G *14-10 x 150 Countersunk Self
Embeding Head. Gal. Class 3- 250 P.O.A 9.200
SRHD1495G * Self Drill.Hex Hd. Screw Cl.3 Gal 14g-10 x 95 - 500 P.O.A 0.019
BITHI550Hex Socket Insert Bit 5mm x 50mm (To
suit SRCS14100G)10 1 P.O.A 0.010
SPBT1260 * 12g-8 x 60 Button Hd. Coarse ZP Cl.2 - 500 P.O.A 6.900
Part STOCK SUB PRICE Approx
No. PACK PACK EACH kg/piece
DUPTYV27 * DuPont Tyvek 2743 x 30m Roll - 1 P.O.A 5.000
DUPTYV30 * DuPont Tyvek 3048 x 30m Roll - 1 P.O.A 5.600
INFT4850R Foil Tape for Tyvek 48mm x 50m Roll - 1 P.O.A 0.552
CSR-HEBAD * CSR Hebel Adhesive 20kg Bag - 1 P.O.A 20.000
BOSFIREB1 Bostik Fireban One -600ml Sausage 20 1 P.O.A 0.950
BOSFIREC Bostik Firecaulk - 600ml Sausage 20 1 P.O.A 0.950
HEBEL®/AAC ACCESSORIESMETAL SECTIONS for HEBEL®/AAC
HEBEL®/AAC FASTENERS
MISCELLANEOUS
BAS7550
For other tophat options see pages 19 to 22
BAS5050 76HDHT30 THB24,35 or 40
* Denotes lead times and minimum order quantity may apply Page 55 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Width
Width
Width
Width
GLASSWOOL INSULATIONPink Partion Insulation *
Pink Partition 11
R Thickness Length Pcs Coverage
Value (mm) (mm) (mm) /Pack /Pack m2
1.2 50
450
1200 32 17.28
2700 24 29.16
600
1200 32 23.04
2700 16 25.92
1.8 75
450
1200 16 8.64
2700 24 29.16
600
1200 16 11.52
2700 16 25.92
16 8.64
2700 24 29.16
600
1200 16 11.52
2700 24 25.92
Pink Partition 14
R Thickness Length Pcs Coverage
Pink Partition Insulation is
specially designed for use in
commercial metal framed walls
and ceilings.
Typically used in partition walls
of low and high rise multi-
residential buildings and
commercial fit-out projects such
as offices, schools, universities
and shopping centres where
acoustic control is essential.
The range encompasses multiple
densities (11, 14, 24 and
32kg/m3), thicknesses and
dimensions to suit typical
commercial steel framed stud
width and spacings.
2.5 110
450 1200 16 8.64
600
1200 16 11.52
2700 10 16.20
2.1 90
450
1200
3.5 165 600 1200 10 7.20
Pink Partition 24
R Thickness Length Pcs Coverage
Value (mm) (mm) (mm) /Pack /Pack m2
0.7 25 600 2700 20 32.40
1.1 38 600 2700 12 19.44
1.4 50
450 1200 12 6.48
600
1200 12 8.64
2700 12 19.44
1.8 64 600 2700 10 16.20
2.1 75
450 1200 10 5.40
600 1200 10 7.20
2.5 90
450 1200 8 4.32
600 1200 8 5.76
2.8 100
450 1200 6 3.24
600 1200 6 4.32
Value (mm) (mm) (mm) /Pack /Pack m2
1.3 50
450
1200 24 12.96
2700 24 29.16
600
1200 16 17.28
2700 16 25.92
1.9 75
450
1200 16 8.64
2700 18 21.87
600
1200 16 11.52
2700 12 19.44
1.2 90
450
1200 14 7.56
2700 15 18.23
600
1200 14 10.08
2700 10 16.20
Pink Partition 32
R Thickness Length Pcs Coverage
Value (mm) (mm) (mm) /Pack /Pack m2
1.5 50
450 1200 12 6.48
600 1200 12 8.64
2.2 75
450 1200 10 5.40
600 1200 10 7.20
2.7 90
450 1200 8 4.32
600 1200 8 5.76
3 100
450 1200 6 3.24
600 1200 6 4.32
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
COMMERCIAL THERMAL AND ACOUSTIC INSULATION FOR WALLS AND CEILINGS
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
* Denotes lead times and minimum order quantity may apply Page 56 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Width
Width
R2.0
HD
Wall 70
430
580
600
R2.5 HD
Wall++
901254901255
8
901304
R2.5
Ceiling 130
430
580
R3.0
Ceiling 155 580901305
901355901404
901403
R5.0
Ceiling
901504
901505
1160
580 1160
Pink Batts are specially designed for thermal insulation of ceilings and walls in residential buildings. Manufactured in Australia for
over 55 years, Pink Batts are renowed for their firmness, making them easy to install between standard stud spacings - both
timber and steel - ensuring they remain in place for ongoing thermal and acoustic performance. Due to their special formulation
Pink Batts are also low itch - making them comfortable to handle during installation.
R3.5
CEILING 175
430
R4.0
Ceiling 195
430
580
1160
1160
10
10
5.54
7.47
901354 1160 16
6
8.86
4.48
R6.0
Ceiling
90
430
580
600
Product
Code
R1.5
Wall 70
430
580
R2.0
Wall 90
430
580
900166900167901217901218900210
215
430
900211900213900253900256900214
PINK BATTS *
R Thickness Length Pcs Coverage
Value (mm) (mm)
1160 24 17.92
1160 12 6.64
1160 12 8.96
/Pack /Pack m2
1160 24 13.29
1160 24 17.92
1160 24 13.29
1200 12 9.59
1160 12 6.64
8.96
1200 12 9.59
1160 12
Length Pcs Coverage
Value (mm) (mm) (mm) /Pack /Pack m2
1160 4.43
1160 5.97
600 1200 5.76
1.7 60
430 1160 5.54
580 1160 7.54
3.32
1160 4.48
1200 4.32
90
430 1160 3.32
580 1160 4.48
580 1160 3.73
580
600
430
580
3.1110
430 1160 2.77
10
8
6
6
5
2.7 90
430 1160
2 70
R Thickness
(mm)
PINK SOUNDBREAK *
430 1160 16
250
901604
901605
430
580
1160
1160
8.86
1160 16 11.95
580 1160 10 7.47
8.86
1160 16 11.95
161160
8
4.43
5.97
6
3.32
THERMAL INSULATION FOR RESIDENTIAL CEILING AND WALL APPLICATIONS
HI PERFORMANCE ACOUSTIC INSULATION FOR USE IN RESIDENTIAL APPLICATIONS IN CEILINGS AND WALLS
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
Pink Soundbreak is designed to provide exceptional acoustic performance in residential building applications. Mineral wool used in Pink Soundbreak insulation is of high density type 24-26kg/m3 as such it is ideally suited for reducing noise transfer through walls, ceilings and floors.
* Denotes lead times and minimum order quantity may apply Page 57 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
Width
Width
>60 13 225 750
70 100 168 1200
15
/Roll
m2
Product Name/Description
2.3
100 1200
10 10.0
2.5 10
Width
1200
60
64 50 168 1200
64 100 200 1200
15 18.0
10 12.0
75 1200 18.0
12.0
3
130
3.2
3.6
10 12.0
10 12.0
6.5 7.8
5
70 50 120 1200 20
Rockwool 100mm Fireseal Partiwall Batt 168mm x 1200mm
Rockwool 50mm Fireseal Partiwall Batt 168mm x 1200mm
FIRE-RATED INSULATION *
Pcs
/Pack
Length
(mm)
Width
(mm)
Thickness
(mm)
Density
kg/m3
2.3
100 1200
10 10.0
2.5 10 12.0
3
130 1200
10
7.8
12.0
3.2
3.6 6.5
3.2
3.6
1.3 55 1200 15 18.0
1.8 75 1200 15 18.0
Sisilation Heavy Duty (HD)
R Thickness Length
Value (mm) (mm) (m)
1.3 55 1200
1.8
75
90
130
1200
1200
1200
18.0
24.0
18.0
21.0
15.0
10.0
12.0
12.0
12.0
7.8
10
10
6.5
100
12
10
Sisilation Light Duty (LD)
Sisilation Medium Duty (MD)
R Thickness Length m2
Value (mm) (mm) (m) /Roll
1200 15
1400 15
1200 18
1.3 55
15
20
1.8
2.0
2.3
2.5
3
PERMASTOP BUILDING BLANKET *
R Thickness Length m2
Value (mm) (mm) (m) /Roll
50mm Fire Stop Party Wall Batts 168mm x 1200mm
100mm Fire Stop Party Wall Batts 200mm x 1200mm
13mm Fireseal Fire Damper Strip 750mm x 225mm
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
Permastop Building Blanket is a reflective insulation composite combining glasswool blanket substrate faced with high quality Sisilation/ reflective foil laminate. The reflective foil laminate enhances thermal performandce, acts as a vapour barrier and aids in minimising condensation that can form in metal clad roofs. The foil laminate also has a 150mm overlap along one side edge, this helps in proper install of adjacent rows of insulation. Permastop Building Blanket is suitable for use in residential and commercial metal clad roof applications as well as metal clad walls.
All Fire-Rated Insulation is made using mineral wool (Rockwool) Technology. The narrow width wall batts or strips are designed to provide fire protection in party or seperating wall constructions between adjacent tenancies . They are generally installed between the top of party wall and roofing membrane. The thinner Fire Damper strips are designed for installation between a fire damper and the fire rated building section in which the damper is mounted.
* Denotes lead times and minimum order quantity may apply Page 58 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
**********
Polymax Thermal Batts are designed to suit a wide range of building applications including roofs, walls, and ceilings.
******
**********
* 5.76 P.O.AINPAC600 Polymax Easy Baffle 600 x 1200 (fills 600mm high void) 450 0.90 16
m2 Price
No. (mm) NRC /Pack /Pack $/m2
Part
Ceiling BaffleThick Batts
12.24 P.O.A
INPASB6-6 Polymax MSB6 SoundBlanket 100 x 450 x 13.6m 100 1.7 2 16.59 P.O.A
INPASB6-4 Polymax MSB6 SoundBlanket 100 x 450 x 13.6m 100 1.7 2
24.48 P.O.A
INPASB5-6 Polymax MSB5 SoundBlanket 85 x 450 x 13.6m 85 1.4 3 24.88 P.O.A
INPASB5-4 Polymax MSB5 SoundBlanket 85 x 450 x 13.6m 85 1.4 4
29.34 P.O.A
INPASB4-6 Polymax MSB4 SoundBlanket 75 x 610 x 16.3m 75 1.2 2 19.89 P.O.A
INPASB4-4 Polymax MSB4 SoundBlanket 75 x 450 x 16.3m 75 1.2 4
29.34 P.O.A
INPASB3-6 Polymax MSB3 SoundBlanket 65 x 610 x 16.3m 65 1.0 2 19.89 P.O.A
INPASB3-4 Polymax MSB3 SoundBlanket 65 x 450 x 16.3m 65 1.0 4
29.34 P.O.A
INPASB2-6 Polymax MSB2 SoundBlanket 50 x 610 x 16.3m 50 0.8 2 19.38 P.O.A
INPASB2-4 Polymax MSB2 SoundBlanket 50 x 450 x 16.3m 50 0.8 4
m2 Price
(mm) Value /Pack Pack $/m2
Part
Polyester Sound BlanketNo.
Thick R Rolls
4.0 P.O.A
INPRA25-6 Polymax R2.5 Acoustic - 90mm x 580 x 1160 90 2.5 8 5.4 P.O.A
INPRA25-4 Polymax R2.5 Acoustic - 90mm x 430 x 1160 90 2.5 8
6.0 P.O.A
INPRA20-6 Polymax R2.0 Acoustic - 90mm x 580 x 1160 90 2.0 12 8.1 P.O.A
INPRA20-4 Polymax R2.0 Acoustic - 90mm x 430 x 1160 90 2.0 12
8.0 P.O.A
INPRA15-6 Polymax R1.5 Acoustic - 75mm x 580 x 1160 75 1.5 16 10.8 P.O.A
INPRA15-4 Polymax R1.5 Acoustic - 75mm x 430 x 1160 75 1.5 16
m2 Price
No. (mm) Value Pack /Pack $/m2
Part
Acoustic / Thermal BattsThick R Batts
P.O.A
P.O.A
P.O.A
P.O.A
P.O.A
8
8
8
8
6.0
8.1
4.0
5.4
4.0
5.4
4.0
5.4
180
180
200
200
2.0
2.0
2.5
2.5
3.0
3.0
3.5
3.5
INPR30-4
INPR30-6
INPR35-4
INPR35-6
Polymax R2.0 - 120mm x 430 x 1160
Polymax R2.0 - 120mm x 580 x 1160
Polymax R2.5 - 140mm x 430 x 1160
Polymax R2.5 - 140mm x 580 x 1160
Polymax R3.0 - 180mm x 430 x 1160
Polymax R3.0 - 180mm x 580 x 1160
Polymax R3.5 - 200mm x 430 x 1160
Polymax R3.5 - 200mm x 580 x 1160
POLYESTER INSULATION
INPR20-4
INPR20-6
INPR25-4
INPR25-6
120
120
140
140
12
12
8
8
P.O.A
P.O.A
P.O.A
No.
Part
INPR15-4
INPR15-6
Price
$/m2
m2
Pack
Thick
(mm)
Polymax R1.5 - 90mm x 430 x 1160
Thermal Batts
Polymax R1.5 - 90mm x 580 x 1160
90
90
16
16
8.0
10.8
P.O.A
P.O.A
Batts
Pack
1.5
1.5
R
Value
Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.
Polymax Easy Baffle is designed to reduce room to room sound transfer through suspended ceiling voids. When placed between a concrete slab soffit and the top junction of a plasterboard partition wall, Polymax Easy Baffle can achieve a transmission reduction of 10 - 16 decibels across a range of frequencies and up to 9 decibels in speech range frequencies - the most common nuisance noise in commercial buildings.
Polymax Sound Blanket provides excellent sound and thermal performance, reducing noise and heat transfer between rooms.
Polymax Acoustic Thermal Batts - provide excellent thermal insulation with the added benefit of reduced noise transmission between rooms and floors as well as minimising external noise from traffic and aircraft.
* Denotes lead times and minimum order quantity may apply Page 59 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
(mm)
*
*
*
*
(mm)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
(mm)
*
*
*
*
*
*
EARTHWOOL INSULATION
--55
Thick
INEBLF13-15 P.O.A18.00
m2
/Pack
Price
$/m2
Part
No.
R
Value
Sheets
/PackLD Foil Faced BlanketEARTHWOOL LD Foil Faced Blanket R1.3 55mm x 1.2 x 15m
Price
P.O.A
INEBLF25-10 105 - - 12.00 P.O.A
INEBLF18-15 75 - -
P.O.AINEBLF30-10 120 -
18.00
Part Thick
EARTHWOOL LD Foil Faced Blanket R2.5 105mm x 1.2 x 10m
EARTHWOOL LD Foil Faced Blanket R1.8 75mm x 1.2 x 15m
EARTHWOOL LD Foil Faced Blanket R3.0 120mm x 1.2 x 10m
Thermal Wall Batts
INER015-6 75 1.5 42 28.26 P.O.A
9.98 P.O.A
-
/Pack /Pack $/m2
R Sheets
No. Value
INER015-4 75 1.5 42 20.95 P.O.A
12.00
m2
INER020-6 75 2 20 13.46 P.O.A
INER020-4 75 2 20
INER021-6 90 2 32 21.53 P.O.A
INER021-4 90 2 32
EARTHWOOL R2.0 90mm x 580 x 1160
P.O.A
23 15.47 P.O.AEARTHWOOL R3.0 145mm x 580 x 1160INER130-6 145 3
2.5 14 6.98 P.O.A
INER025-6 90 2.5 14 9.42 P.O.A
EARTHWOOL R2.5 90mm x 430 x 1160
EARTHWOOL R2.5 90mm x 580 x 1160
INER025-4 90
No. Value /Pack /Pack $/m2
ThickPartAcoustic Batts
175EARTHWOOL R3.5 175mm x 430 x 1160 21 10.47 P.O.A
INER135-6 EARTHWOOL R3.5 175mm x 580 x 1160 175 3.5 21 14.13 P.O.A
3.5INER135-4
EARTHWOOL ACOUSTIC 14kg/50mm 600 x 1160INESC1450-6 50
EARTHWOOL ACOUSTIC 14kg/50mm 450 x 1160
- - 32.40 P.O.A
INESC1175-6 75 - - 22.67 P.O.A
INESC1150-6 50EARTHWOOL ACOUSTIC 11kg/50mm 600 x 2700
EARTHWOOL ACOUSTIC 11kg/75mm 600 x 2700
INESC1450-4 50 - - 19.84 P.O.A
INESC1475-4 75 - - 12.53 P.O.A
INESC1475-6 75 - - 12.53 P.O.A
EARTHWOOL ACOUSTIC 14kg/75mm 450 x 1160
EARTHWOOL ACOUSTIC 14kg/75mm 600 x 1160
- - 26.45
m2 Price
(mm) Value /Pack /Pack $/m2
P.O.A
R Sheets m2 Price
2.5 30 14.96 P.O.A
20.18 P.O.A125 2.5
11.47
EARTHWOOL R1.5 75mm x 430 x 1160mm
EARTHWOOL R1.5 75mm x 580 x 1160m
EARTHWOOL R2.0 75mm x 430 x 1160
EARTHWOOL R2.0 75mm x 580 x 1160
EARTHWOOL R2.0 90mm x 430 x 1160 15.96 P.O.A
INER130-4 145 3
Part
No.Ceiling Batts
Thick R Sheets
EARTHWOOL R2.5 125mm x 430 x 1160
EARTHWOOL R2.5 125mm x 580 x 1160
EARTHWOOL R3.0 145mm x 430 x 1160
INER125-6
INER125-4 125
30
23
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud.
* Denotes lead times and minimum order quantity may apply Page 60 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
(mm)
*
*
*
*
*
*
*
*
*
*
*
Other thicknesses available up to 100mm.
POLASTIC Insulation Sheet 10mm x 1200 x 2400 (2.88m2)
POLASTIC Insulation Sheet 12mm x 1200 x 2400 (2.88m2)
P.O.A
10 - - - P.O.A
P.O.A
16 - - - P.O.A
20 - - -POLAST20
12 - -
POLASTIC Insulation Sheet 16mm x 1200 x 2400 (2.88m2)
POLASTIC Insulation Sheet 20mm x 1200 x 2400 (2.88m2)
POLASTIC INSULATION
m2 Price
No. Value /Pack /Pack $/m2
Part
Polastic InsulationThick R Sheets
POLAST10
POLAST12
POLAST16
-
POLASTIC Seam Tape 50mm x 50m without logo
POLASTIC Seam Tape 75mm x 50m with logo
POLASTIC 75mm Tape Dispenser
POLASTIC Washers-Brown (for concrete) - -
-
POLAST07R 7 - - -
P.O.A
POLASPTP-075 - - - - P.O.A
POLASPTP-050 - - -
P.O.A
POLAST07 7 - - - P.O.APOLASTIC Insulation Sheet 7mm x 1200 x 2400 (2.88m2)
POLASTIC Insulation ROLL 7mm x 1200 x 24m (28.8m2)
- - P.O.APOLASPTD - -
- P.O.A
POLASPWP-002 - - - - P.O.A
POLASPWP-001 -
POLASTIC Washers-White (for timber)
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud.
* Denotes lead times and minimum order quantity may apply Page 61 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Ramset insulation fasteners size range from 25mm to 100mm.
RAMT3IG625 1 box 1 box25mm Insulfast GT3 WHITE Insulation Fastener in box 400 P.O.A 0.66
No. PACK
SUB
1000 1000 P.O.A
P.O.A 0.66
PRICE Approx
1000 1000 P.O.A
1000 1000 P.O.A
1000 1000 P.O.A
EACH Kg/Piece
PRICE
EACH
P.O.A.
500 500 P.O.A
1000 1000 P.O.A
500 500 P.O.A
500 500 P.O.A
1000 1000 P.O.A
1000 1000 P.O.A63mm Self Adhesive Insulation Pins & Clips - Box of 1000
90mm Self Adhesive Insulation Pins & Clips - Box of 1000
FMPA63
FMPA90
FMPP110
FMPP140
FMPP165
FMPP19
Ramset Insulfast GT3 Gas fixing tool S/N 1
FMPP63
FMPP90
FMPP31
FMPP42
Part
Ramset Insulation Fixing Products PACK
31mm Perforated Base Insulation Pins & Clips - Box of 1000
42mm Perforated Base Insulation Pins & Clips - Box of 1000
63mm Perforated Base Insulation Pins & Clips - Box of 1000
90mm Perforated Base Insulation Pins & Clips - Box of 1000
110mm Perforated Base Insulation Pins & Clips - Box of 500
140mm Perforated Base Insulation Pins & Clips - Box of 500
165mm Perforated Base Insulation Pins & Clips - Box of 500
19mm Perforated Base Insulation Pins & Clips - Box of 1000
1RAMT3IF
TPINSUL
No. PACK
Approx
Kg/Piece
SUBPart
0.60148
PACK
24mm x 50m Blue Duct/Insulation support tape^
Insulation Support Tape
1000 P.O.A
FMPA42 1000 1000 P.O.A
FMPA31 100031mm Self Adhesive Insulation Pins & Clips - Box of 1000
42mm Self Adhesive Insulation Pins & Clips - Box of 1000
500 P.O.A
FMPA20 1000 1000 P.O.A
FMPA110 500110mm Self Adhesive Insulation Pins & Clips - Box of 500
20mm Self Adhesive Insulation Pins & Clips - Box of 1000
INSULATION FIXINGSPart SUB Price
No. PACK $PACKInsulation Fixings
Faststud can supply a range of insulation fixings and clips. To obtain more information please contact
TPINSUL
RAMT3IF
FMPA# FMPPA#
RAMT3IG625
*
* comes with clips
*
* Denotes lead times and minimum order quantity may apply Page 62 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
REFLECTIVE INSULATION
KINGSPAN AIRCELL® INSULATION
KINGSPAN KOOLTHERM® INSULATION
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
Insulation for Use Behind Wall Lining and Framed Walls Kingspan Kooltherm K12 Framing Board is a super high performance, fibre-free rigid thermoset phenolic insulation, faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective surface improves the thermal resistance of any cavity adjacent to the board.
Insulation for Concrete Soffits Kingspan Kooltherm K10 FM Soffit Board is a super high performance, fibre-free rigid thermoset phenolic insulation core, sandwiched between an upper tissue-based facing and a lower facing of highly reflective aluminium foil autohesively bonded to the insulation core during manufacture. Available in a range of thicknesses from 25mm to 100mm offering R-Values of R1.2 to R5.0. Also available with a white aluminium foil facing.
Faststud offers the full Kooltherm range including K8 Cavity Board & K17 Insulated plasterboard. Contact our office for more information.
Kingspan AIR-CELL® is a versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. Faststud offers the full range of Kingspan Air-cell products.
MBFS M82 M324
* Denotes lead times and minimum order quantity may apply Page 63 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
*
*
*
*
P.O.A
INFT4850R No.439 FOIL TAPE REINFORCED for Tyvek 48mm x 50m roll 48 50 24 - P.O.A
INFT7550R Reinforced Foil Tape 75mm x 50m roll (1/16)^ 75 50 16 -
Foil Tape
INFT5050B No.400F FOIL TAPE Aluminium Foil 50mmx50m with backing 50 50 24 - P.O.A
91
Dupont Tyvek Homewrap
DUPTYV27 DuPont Tyvek Homewrap 2743mm x 30m roll 2743 30 - 82 P.O.A
DUPTYV30 DuPont Tyvek Homewrap 3048mm x 30m roll 3048 30 - P.O.A
P.O.A
JH305664 HardieWrap Weather Barrier 2.75m x 30m roll 2750 30 - 82.5 P.O.A
INFH15030 Sarking - X-Heavy Duty Roof & Wall Wrap 1500 x 30m roll 1350 30 - 45
81 P.O.A
INFH13560B FASTWRAP - Heavy Duty Wall Wrap Breather 1350 x 60m roll 1350 60 - 81 P.O.A
INFH13560 FASTWRAP - Heavy Duty Wall Wrap 1350 x 60m roll 1350 60 -
PartSARKING
Width Length Pack m2 per Price
No. m m Qty Pack $
Silversark™ Extra Tough or SilverWrap™ Tough
R1.3
Silversark™ Extra Tough BREATHER or SilverWrap™ Tough
BREATHER R1.0
BRICK VENEER WALL WEATHERBOARD WALL
PITCHED TILE ROOF METAL ROOF
SilverSark™ Extra Tough R1.5 Summer R0.9 Winter
SilverSark™ Extra Tough R1.5 Summer R0.9 Winter
Total R values shown apply to typical site conditions and to the range of climatic conditions typical of mainland Australian capital cities. They have been calculated by an independent consulting engineer in accordance with Australia/New Zealand Standard AS/NZS 4859.1
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
* Denotes lead times and minimum order quantity may apply Page 64 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
STEEL SAFETY DATA SHEET
SAFETY DATA SHEETS
Other Products Safety Data Sheets for other products sold by Faststud are available upon request.
* Denotes lead times and minimum order quantity may apply Page 65 All Prices Exclude GST.E&OE
Pricing Effective 1st April 2017 (V4.0)
(Reviewed: 12/11/16) Page 1 of 3 (REV 6.0) Form: AC 02-01-02
TERMS AND CONDITIONS (Terms and Conditions: Version 6.0)
Payment terms
1. The terms of payment are strictly thirty (30) days from the end of month of invoicing (or such other period as nominated by the supplier herein). Specialised Stud Systems Pty Limited ABN 85 102 973 811 and its related bodies corporate (as that term is defined in the Corporations Act 2001) (Supplier) may, at any time, upon the provision of 48 hours’ written notice to the Applicant vary the terms and conditions of trade.
2. If the Applicant does not agree with the variations proposed by the Supplier, they must notify the Supplier in writing within fourteen (14) days from receipt of the written notice that the variations are not agreed to. The Supplier and/or the Applicant will then be at liberty to suspend/withdraw credit facilities if no agreement can be reached between the parties regarding the proposed variations. Absent notice from the Applicant, the varied terms and conditions of trade may be deemed accepted. Clerical errors (such as spelling mistakes or grammatical errors) may be subject to correction without notification.
3. The Applicant must check all invoices and advise the Supplier of any errors or omissions within seven (7) days of receipt. Failing advice from the Applicant that the invoice contains any errors or omissions, the invoice may be deemed accepted by the Supplier.
4. Should the Applicant not pay for the goods or services supplied by the Supplier in accordance with the credit terms as provided herein, or as agreed in writing by the Supplier and Applicant from time to time, after issuing a written demand to the Applicant demanding payment within fourteen (14) days, the Supplier will be entitled to charge an administration fee of 10 percent of the amount of the invoice payable.
Prices 5. Unless otherwise stated prices quoted are exclusive of GST and other duties and taxes
payable. 6. Prices quoted are firm for thirty (30) days from date of quotation. 7. The Applicant shall arrange and bear the costs of any delivery made ex Suppliers store,
including insurance and any other associated costs, unless otherwise agreed by the parties.
Delivery
8. Any date or time quoted for delivery is an estimate only and the Supplier shall endeavour to effect delivery at the time or times requested by the Applicant but failure to do so shall not confer any right of cancellation or refusal of delivery on the Applicant or render the Supplier liable for any loss or damages directly or indirectly sustained by the Applicant as a result thereof.
9. The Applicant shall not be relieved of any obligation to accept or pay for products by reason of any delay in delivery or any strike, lockout, unavailability of raw materials, accidents to machinery, differences with workman, breakdowns, shortages of supplier or labour, fires, floods, storms or tempest, transport delays, acts of God, restriction or interventions imposed by any laws, regulations, governments or agencies thereof and any other cause beyond the control of the Supplier or any other cause whatsoever.
10. The Supplier’s obligation to deliver, if any, shall be discharged on arrival of the products at the Applicant’s nominated delivery destination, nominated transport company, nominated agent or the address appearing on the invoice. The Applicant shall unload the products upon delivery, provided that if the Applicant is unable or unwilling to accept physical delivery of the products when the products are ready for delivery the Supplier shall be entitled to charge a fee for any delay experience or arrange for storage of the products at the risk and cost of the Applicant including all transportation, storage and other consequential costs.
11. In the event that there are any issues or allegations as to defects made by the Applicant in regard to the goods delivered, the Applicant must notify the within seven (7) days of delivery. Failing notification by the Applicant within seven (7) days, the goods are deemed accepted in the condition in which they were delivered.
12. The Supplier may at its discretion make and invoice partial deliveries and each partial delivery shall be a separate sale pursuant to these terms and conditions.
13. The Supplier reserves the right to charge a handling fee for orders less than $100.00 and if less than $500.00 for a reseller or where express freight or special packaging required.
Inspection and claims
14. The Applicant shall examine the products immediately after delivery and the Supplier shall not be liable for any claims for misdelivery, shortage, defect unless the Supplier receives details in writing within seven (7) days of the date of delivery of the products and services.
Warranty
15. Subject to payment in full being made as defined in clauses 39 and 40, the Supplier shall as a non-manufacturer use its endeavours to pass on to the Applicant the benefit of any warranties or guarantees it receives in respect of products or parts thereof supplied to the Applicant provided the products or parts thereof have been installed in accordance with the manufacturers’ recommendations or specifications or relevant Australian Standards. Such warranties or guarantees exclude liability for any special, consequential, direct or indirect loss, damage harm or injury suffered as a result of any product defect to the extent permitted by law and shall be restricted to any one or more of the following: a) repair the defective goods free of charge; b) replace the defective goods or part of those goods; c) supply equivalent replacement goods; or d) credit the Applicant such amount as the manufacturer in its sole
discretion considers reasonable having regard to the price paid for the goods and the use of the goods enjoyed by the Applicant.
Limitation of liability
16. These terms and conditions do not exclude, restrict or modify the application of any provisions of any Commonwealth, State or Territorial Law which by law cannot be excluded, restricted or modified.
17. In no circumstances will the Supplier incur any liability in respect of or arising out of or in connection with any special, consequential, direct or indirect loss, damage, harm or injury suffered or incurred by the Applicant.
a) Sale to Non-Consumers
i) In the case of products supplied by the Supplier to an Applicant who is not a “consumer” (as defined in the Competition Consumer Act 2010 as amended from time to time (CCA)), if the products do not correspond with the description of them on the invoice or are defective, then provided that the products are preserved intact and made available for inspection by a representative of the Supplier and are returned to the Supplier in the same order and condition as that in which they were delivered, the Supplier shall at its option:
(a) replace the goods or supply similar goods; (b) repair the goods; or (c) provide the cost for replacing the goods or for acquiring equivalent
goods. but any claim in this respect must be made in writing within seven (7) days of the date of delivery of those products.
ii) Should the Applicant seek indemnity from the Supplier in respect of any claim by a consumer on the warranty implied by the Act in a contract for the supply of products by the Applicant to that consumer, sub-paragraph (i) will not apply and in respect of products that are of a kind ordinarily acquired for personal, domestic or household use or consumption (Consumer Goods), the Supplier liability is limited to indemnifying the Applicant in accordance with the Act, limited to a liability to pay to the Applicant an amount equal to the cost of replacing the products or the cost of obtaining equivalent products or the cost of having the products repaired, whichever is the lesser amount.
b) Sales to Consumers
In the case of products supplied by the Supplier to an Applicant who is a consumer,
to the extent that the products are not Consumer Goods, the liability of the
Supplier to the Applicant for breach of any warranty or condition (other than a
warranty or condition implied by section 51-53 of the CCA) or for breach of any
duty of care shall in all cases be limited, at the option of the Supplier to any one
or more of:
i) the replacement of the products or the supply of equivalent products;
ii) the repair of the products;
iii) the payment of the cost of replacing the products; or
iv) acquiring equivalent products or the payment of the cost of having the product repaired.
c) Except for those conditions and warranties implied by the Act or other sale of products or consumer protection legislation which may not be excluded, the Applicant agrees that:
i) it has not relied on any inducement, representation or statement made by or on behalf of the Supplier in purchasing the products and there are no implied conditions or warranties herein and no collateral contracts in connection herewith (except such as may be in writing and signed by a duly authorised representative of the Supplier); and
ii) this clause sets out the entire liability of the Supplier in respect of its liability under the Act or otherwise in respect of liabilities to the consumer for a breach of a condition or warranty with respect to the sale of products or goods.
18. The Applicant releases and discharges the Supplier from any claim arising out of or in connection with the installation and/or finishing of the product supplied by the Supplier and indemnifies and holds harmless the Supplier in respect of any such claim.
19. Any claim in connection with any act, default or omission (including any breach of contract or breach of duty including, but not limited to, negligence) on the part of the Supplier must be notified to the Supplier in accordance with clause 14 otherwise: a) the Supplier shall not be liable on the claim; and b) the Applicant hereby releases and indemnifies the Supplier in respect of any
such claim. 20. The liability of the Supplier in respect of any claim notified under the preceding
clause shall be limited to the cost of the product supplied by the Supplier. 21. These terms do not exclude, restrict or modify the application of any provision of any
Commonwealth, State or Territorial law which, by law, cannot be excluded, restricted or modified.
Returns
22. Other than in respect of the Supplier’s obligations pursuant to c lause 17 hereof, the Suppl ier shall not be liable to accept any returned products but may accept the return of products provided that such products shall only be accepted for credit and with the prior written approval of a duly authorised representative of the Supplier Products returned for credit pursuant to this clause must be returned with packing slip and invoice and will be subject to a handling and administration charge equivalent to fifteen percent (15%) of the invoiced value of the returned products. Return freight and other expenses will be paid for by the Applicant and no returns of non-standard products will be accepted.
Supply
23. The Supplier reserves the right to decline any order for products when the size of the order or the requested delivery date inhibits or prejudices the Supplier’s ability to fulfil its contractual commitments to its franchisees, licensees or other Applicants. In the event that the Supplier declines an order, the Supplier will provide the Applicant with written reasons as to why the order has been declined.
Advertising
24. The Applicant shall not advertise in any media the sale or disposal of products and services purchased from the Supplier, without the written consent of a duly authorised Representative of the Supplier. The Applicant shall indemnify and hold indemnified the Supplier against any liability including any special, consequential, direct or indirect loss, damage harm or injury suffered as a result of false, misleading or deceptive advertising and untrue representation or statements made to any person by the Applicant in the course of advertising.
(Reviewed: 12/11/16) Page 2 of 3 (REV 6.0) Form: AC 02-01-02
25. The Applicant further warrants and acknowledges that it will not use any existing logo or brand name of the Supplier or used by the Supplier or that similar to, or attempt to register a trade mark or trade name or that similar to those of the Supplier without the written consent of a duly authorised Representative of the Supplier.
Intellectual property
26. The Applicant shall indemnify and hold indemnified the Supplier against any claim, suit, proceedings or demand made by a third party for loss, damage, suffered whether directly or indirectly by infringement of its intellectual property rights.
Pallets and gluts
27. Unless otherwise stated or agreed between the parties, gluts, pallets and containers used to deliver products to the Applicant, will remain the exclusive property of the Supplier and shall be returned to the Supplier at the Applicant’s expense within thirty (30) days of the date of delivery. The Supplier reserves the right to invoice the Applicant for any glut, pallet or container not returned by the due date.
Jurisdiction
28. The Applicant acknowledges and agrees that this agreement will be governed by the laws of New South Wales, and the laws of the Commonwealth of Australia which are in force in New South Wales.
29. The Applicant acknowledges and agrees that any contract for the supply of goods or services between the Supplier and the Applicant is formed at the address of the Supplier.
30. The parties to this agreement submit to the non-exclusive jurisdiction of the courts of New South Wales and the relevant federal courts and courts competent to hear appeals from those courts.
Security/charges
31. The Applicant charges in favour of the Supplier all of its estate and interest in any real property that the Applicant owns at present and in the future with the amount of its indebtedness hereunder until discharged.
32. The Applicant charges in favour of the Supplier all of its estate and interest in any personal property that the Applicant owns at present and in the future with the amount of its indebtedness hereunder until discharged.
33. The Applicant appoints as its duly constituted attorney the Supplier's company secretary from time to time to execute in the Applicant's name and as the Applicant's act and deed any real property mortgage, bill of sale or consent to any caveat the Supplier may choose to lodge against real property that the Applicant may own in any Land Titles Office in any state or territory of Australia, even though the Applicant may not have defaulted in carrying out its obligations hereunder, upon written notice and demand to the Applicant (in the event that there is no default by the Applicant in carrying out its obligations hereunder).
34. Where the Applicant has previously entered into an agreement with the Supplier by which the Applicant has granted a charge, mortgage or other security interest (including a security interest as defined in the Personal Property Securities Act 2009 (PPSA)) over real or personal property, those charges, mortgages or other security interests will continue and co-exist with the obligations and security interests created in this agreement. The Supplier may, at its election and upon the provision of written notice, vary the terms of such previous charges, mortgages or other securities to reflect the terms herein.
Purpose of credit
35. The Applicant acknowledges and agrees that the credit to be provided to the Applicant by the Supplier is to be applied wholly or predominantly for commercial purposes.
Formation of contract
36. Quotations made by the Supplier will not be construed as an offer or obligation to supply in accordance with the quotation. The Supplier reserves the right to accept or reject, at its discretion, any offer to purchase received by it upon provision of written reasons to the Applicant. Only written acceptance by the Supplier of the Applicant’s offer will complete a contract.
37. Placement of an order, either verbally or in writing, will constitute an offer to purchase by the Applicant and will imply acceptance of these terms and conditions.
38. If the Applicant cancels or alters any order for products after the Supplier has received the order then the Supplier reserves the right to charge to the Applicant the additional costs incurred in cancelling or altering any order or part order together with the costs of any labour and handling to the date of such cancellation or alterations.
Retention of title
39. Whilst the Applicant has not paid for the goods supplied in full at any time, the Applicant agrees that property and title in the goods will not pass to the Applicant and the Supplier retains the legal and equitable title in those goods supplied and not yet sold.
40. Until payment in full has been made to the Supplier, the Applicant will hold the goods in a fiduciary capacity for the Supplier and agrees to store the goods in such a manner that they can be identified as the property of the Supplier, and will not mix the goods with other similar goods.
41. The Applicant will be entitled to sell the goods in the ordinary course of its business, but until full payment for the goods has been made to the Supplier, the Applicant will sell as agent and bailee for the Supplier and the proceeds of sale of the goods will be held by the Applicant on trust for the Supplier absolutely.
42. The right to on-sell, deal or otherwise disposed of the Supplier’s goods in the normal course of trade may be revoked at any time and shall automatically cease if a receiver is appointed over any of the assets or the undertaking of the Applicant or if a winding up order is made against the Applicant or if the Applicant goes into voluntary administration or liquidation (otherwise than for the purpose of reconstruction or amalgamation) or calls a meeting of creditors or makes any arrangements or composition or commits any act of bankruptcy or where the Applicant is in default of any of its obligations to the Supplier.
43. The Supplier licences the Applicant to sell goods and to sell goods manufactured using products of the Supplier. If the goods are affixed to other material, the totality thereof shall be the sole and exclusive property of the Supplier until payment has been made in full to the Supplier, unless the other material or part thereof are or is the property of a party or parties other than the Applicant in which case the totality thereof shall be deemed to be owned as tenants in common with such other party other than the Applicant in shares corresponding to the respective amounts paid or payable by the Applicant is respect of such other party or parties.
44. The Applicant’s indebtedness to the Supplier, whether in full or in part, will not be discharged by the operation of clause 41 hereof unless and until the funds held on trust are remitted to the Supplier.
45. The Applicant agrees that whilst property and title in the goods remains with the Supplier, the Supplier has the right, with prior notice to the Applicant, to enter upon any premises occupied by the Applicant (or any receiver, receiver and manager, administrator, liquidator or trustee in bankruptcy of the Applicant) to inspect the goods of the Supplier and to repossess the goods which may be in the Applicant’s possession, custody or control when payment is overdue.
46. The Applicant will be responsible for the Supplier’s reasonable costs and expenses in exercising its rights under clause 45. Where the Supplier exercises any power to enter the premises, that entry will not give rise to any action of trespass or similar action on the part of the Applicant against the Supplier, its employees, servants or agents.
47. The Applicant agrees that where the goods have been retaken into the possession of the Supplier, the Supplier has the absolute right to sell or deal with the goods upon reasonable notice to the Applicant, and if necessary, sell the goods with the trademark or name of the Applicant on those goods, and the Applicant hereby grants an irrevocable licence to the Supplier to do all things necessary to sell the goods bearing the name or trademark of the Applicant.
48. For the avoidance of doubt, the Supplier’s interest constitutes a ‘purchase money security interest’ pursuant to the PPSA.
Cancellation of terms of credit
49. The Supplier reserves the right to withdraw credit at any time upon the provision of 48 hours’ written notice.
50. Upon cancellation with notice all liabilities incurred by the Applicant become due and payable to the Supplier within seven (7) days.
Indemnity
51. The Applicant agrees to indemnify the Supplier and keep the Supplier indemnified against any claim that arises out of the goods and services supplied under this agreement. This indemnity includes any legal fees and expenses the Supplier incurs in order to enforce its rights, on an indemnity basis.
Provision of further information
52. The Applicant undertakes to comply with any reasonable written requests by the Supplier to provide further information for the purpose of assessing the Applicant’s creditworthiness, including an updated credit application.
53. If the Applicant is a corporation (with the exception of a public listed company), it must advise the Supplier of any alteration to its corporate structure (for example, by changing directors, shareholders, or its constitution). In the case of a change of directors or shareholders the Supplier may ask for new guarantors to sign a guarantee and indemnity.
Corporations
54. If the Applicant is a corporation, the Applicant warrants that all of its directors have signed this agreement and that all of its directors may be required to enter into a guarantee and indemnity with the Supplier in relation to the Applicant's obligations to the Supplier.
Trustee capacity
55. If the Applicant is the trustee of a trust (whether disclosed to the Supplier or not), the Applicant warrants to the Supplier that: a) the Applicant enters into this agreement in both its capacity as trustee and
in its personal capacity; b) the Applicant has the right to be indemnified out of trust assets; c) the Applicant has the power under the trust deed to sign this agreement;
and d) the Applicant will not retire as trustee of the trust or appoint any new or
additional trustee without advising the Supplier. 56. The Applicant must give the Supplier a copy of the trust deed upon request.
Partnership
57. If the Applicant enters into this agreement as partners, the Applicant warrants that all of the partners have signed this agreement and that all of the partners may be required to enter into a guarantee and indemnity with the Supplier in relation to the Applicant's obligations to the Supplier.
58. If the Applicant is a partnership, it must not alter its partnership (for example, adding or removing partners or altering its partnership agreement) without advising the Supplier. In the case of a change of partners, the Supplier may ask for new guarantors to sign a guarantee and indemnity.
Insolvency
59. If the Applicant becomes insolvent, the Applicant remains liable under this agreement for payment of all liabilities incurred hereunder. The Applicant remains liable under this agreement even if the Supplier receives a dividend or payment as a result of the Applicant being insolvent.
Waiver
60. A waiver of any provision or breach of this agreement by the Supplier must be made by an authorised officer of the Supplier in writing. A waiver of any provision or breach of this agreement by the Applicant must be made by the Applicant's authorised officer in writing.
61. Until ownership of the goods passes, the Applicant waives its rights it would otherwise have under the PPSA (unless otherwise agreed to in writing by the Supplier and the Applicant): a) under section 95 to receive notice of intention to remove an accession; b) under section 118 to receive notice that the Supplier intends to enforce its
security interest in accordance with land law; c) under section 121(4) to receive a notice of enforcement action against
liquid assets; d) under section 129 to receive a notice of disposal of goods by the Supplier
purchasing the goods; e) under section 130 to receive a not ice to dispose of goods; f) under section 132(2) to receive a statement of account following disposal
of goods;
(Reviewed: 12/11/16) Page 3 of 3 (REV 6.0) Form: AC 02-01-02
g) under section 132(4) to receive a statement of account if no disposal of goods for each 6 month period;
h) under section 135 to receive notice of any proposal of the Supplier to retain goods;
i) under section 137(2) to object to any proposal of the Supplier to retain or dispose of goods;
j) under section 142 to redeem the goods; k) under section 143 to reinstate the security agreement; and l) under section 157(1) and 157(3) to receive a notice of any verification
statement.
Costs
62. The Applicant must pay for its own legal, accounting and business costs and all costs incurred by the Supplier relating to any default by the Applicant under this agreement. The Applicant must also pay for all stamp duty and other taxes payable on this agreement (if any).
63. The Applicant will pay the Supplier’s reasonable costs and disbursements incurred in pursuing any recovery action, or any other claim or remedy, against the Applicant, including debt recovery fees and legal costs on an indemnity basis as a result of any default under this agreement. Such costs and disbursements will be due and payable by the Applicant to the Supplier irrespective of whether pursuit of the recovery action, claim or remedy is successful.
64. The Applicant acknowledges and agrees that payments by the Applicant will be applied by the Supplier as follows. a) Firstly, in payment of any and all collection costs and legal costs in
accordance with clauses 46 and 63. b) Secondly, in payment of any interest incurred in accordance with clause
70. c) Thirdly, in payment of the outstanding invoice(s).
65. In circumstances where the Supplier seeks to enforce a purchase money security interest under the PPSA over collateral or proceeds (these terms being consistent with the terms defined in the PPSA), payments received from the Applicant will be allocated in a manner at the Suppliers absolute and unfettered discretion, so as to attribute, to the greatest extent possible, the unpaid balance of the debt to the purchase money obligation in respect of the collateral and/or proceeds over which the Supplier seeks to enforce its purchase money security interest.
66. To the extent that payments have been allocated to invoices by the Supplier in its business records, the Supplier may, at its sole and unfettered discretion, allocate and/or retrospectively reallocate payments in any manner whatsoever at the Supplier’s absolute discretion, including in a manner inconsistent with clause 65 herein.
67. Payments allocated (and/or reallocated) under clause 65 and/or 66 will be treated as though they were allocated (and/or reallocated) in the manner determined by the Supplier on the date of receipt of payment.
Taxes and duty
68. The Applicant must pay GST on any taxable supply made by the Supplier to the Applicant under this agreement. The payment of GST is in addition to any other consideration payable by the Applicant for a taxable supply.
69. If as a result of: a) any legislation becoming applicable to the subject matter of this
agreement; or b) any changes in legislation or its interpretation by a court of competent
jurisdiction; or c) by any authority charged with its administration;
the Supplier becomes liable to pay any tax, duty, excise or levy in respect of the amounts received from the Applicant, then the Applicant must pay the Supplier these additional amounts on 48 hours’ written demand.
Interest rates
70. The interest rate on any outstanding debts is a fixed rate of 15 percent per annum.
Set-off
71. All payments required to be made by the Applicant under this agreement will be made free of any set-off, or counterclaim and without deduction or withholding unless agreed to otherwise by the Supplier and the Applicant in writing. Any reasonable requests to set-off, deduct or withhold from amounts outstanding will be considered by the Supplier, provided that reasonable evidence is provided to the Supplier as to why the Applicant is entitled to the set-off, deduction or withhold from amounts outstanding.
72. Any amount due to the Supplier from time to time may be deducted from any monies which may be or may become payable to the Applicant by the Supplier, with the written agreement of the Supplier and the Applicant.
Electronic and other communications
73. The Applicant agrees: a) to accept service of notices, statutory notices and Court documents via
email in addition to any and all other valid forms of service; b) to have invoices sent by email in the alternative to delivery in person, via
post or via facsimile; c) that email communications from the Supplier to the Applicant constitute
an “electronic communication” within the meaning of the Electronic Transactions Act 2000 (NSW);
d) that in agreeing to receive invoices by email, and the service of notices, statutory notices and Court documents via email, the Applicant is in both instances designating “an information system for the purpose of receiving electronic communications” within the meaning of the Electronic Transactions Act 2000 (NSW); and
e) that evidence of the “despatch” (within the meaning of the Electronic Transactions Act 2000 (NSW)) by the Supplier of an email is also prima facie evidence of the “receipt” of the email by the Applicant within the meaning of the Act. Unless the contrary is proven the time of receipt will be deemed to be twenty (20) seconds after the time of the “despatch” of the email.
Miscellaneous
74. The Supplier is not liable for any loss caused to the Applicant by reason of strikes, lockouts, fires, riots, war, embargoes, civil commotions, acts of God or any other activity beyond the Supplier's control.
75. In relation to the supply of goods, the Supplier’s liability is limited to: a) replacing the goods or supplying similar goods; b) repairing the goods; c) providing the cost for replacing the goods or for acquiring equivalent
goods; and d) providing the cost for having the goods repaired.
76. In relation to the supply of services, the Supplier’s liability is limited to: a) supplying the service again; or b) providing for the cost of having the services supplied agai n.
77. The Supplier is not liable, for loss of profit, economic or financial loss, damages, consequential loss, loss of opportunity or benefit, loss of a right or any other indirect loss suffered by the Applicant as a result of the goods and/or services supplied under this agreement.
78. The Applicant will, at the request of the Supplier, execute documents and do such further acts as may be required for the Supplier to register the security interest granted by the Applicant under the PPSA.
79. The Applicant agrees to accept service of any document required to be served, including any notice under this agreement or the PPSA or any originating process, by prepaid post at any address nominated in this application or any other address later notified to the Supplier by the Applicant or the Applicant’s authorised representative.
80. The Applicant further agrees that where we have rights in addition to those under part 4 of the PPSA, those rights will continue to apply.
81. The Applicant irrevocably grants to the Supplier the right to enter upon the Applicant’s property or premises, with notice, and without being in any way liable to the Applicant or to any third party, of the Supplier has cause to exercise any of their rights under sections 123 and/or 128 of the PPSA, and the Applicant shall indemnify the Supplier from any claims made by any third party as a result of such exercise.
82. Nothing in this agreement shall be read or applied so as to purport to exclude, restrict or modify or have the effect of excluding, restricting or modifying the application in relation to the supply of any goods and/or services pursuant to this agreement of all or any of the provisions the Competition and Consumer Act 2010 or any relevant State or Federal Legislation which by law cannot be excluded, restricted or modified.
83. The Supplier shall not be liable for any failure or delay to supply or deliver the goods where such failure or delay is wholly or partly due to cause or circumstances whatsoever outside the reasonable control of the Supplier including, but not limited to, war, strikes, lockouts, industrial disputes or unrest, government restrictions or intervention, transport delays, fire, act of God, breakdown of plant, shortage of supplies or labour, storm or tempest, theft, vandalism, riots, civil commotions or accidents of any kind.
Severance
84. If any provision of this agreement is not enforceable in accordance with its terms, other provisions which are self-sustaining are, and continue to be, enforceable in accordance with their terms.
85. If any part of this agreement is invalid or unenforceable, that part is deleted and the remainder of the agreement remains effective.
Variation
86. The Applicant agrees that these terms and conditions may be varied, added to, or amended by an authorised officer of the Supplier at any time by written notice to the Applicant. The Applicant will be provided with fourteen (14) days to accept the variation/s, failing which the variations may be deemed accepted by the Supplier. Any reasonable requests to vary the terms by the Applicant will be considered by the Supplier.
87. Any proposed variation to these terms and conditions by the Applicant must be requested in writing. The Supplier may refuse any such request by provision of written reasons.
Consent to register
88. The Applicant hereby consents to the Supplier recording the details of this Agreement on the Personal Property Securities Register and agrees to do all things necessary and reasonably required by the Supplier to effect such registration.
89. The Applicant waives any right or entitlement to receive notice of the registration of any security interest(s) created by this instrument on the Personal Property Securities Register.
Entire agreement
90. This agreement constitutes the entire agreement between the parties relating in any way to its subject matter, unless agreed to otherwise in writing by the Supplier and the Applicant. Subject to clause 34 all previous negotiations, understandings, representations, warranties, memoranda or commitments about the subject matter of this agreement are merged in this agreement and are of no further effect. No oral explanation or information provided by a party to another affects the meaning or interpretation of this agreement or constitutes any collateral agreement, warranty or understanding.
91. In circumstances where there is a pre-existing written credit agreement (Original Agreement) between the Applicant and the Supplier, these terms and this agreement will constitute a variation of the Original Agreement whereby the terms of the Original Agreement are deleted and replaced with terms herein.
Privacy Act
92. The Applicant agrees to the terms of the Privacy Statement pursuant to the Privacy Act 1988 (as amended by the Privacy Amendment (Enhancing Privacy Protection) Act 2012) contained in this document.