Specalog for M322C Wheel Excavator, AEHQ5533-01

®®

EngineEngine Model Cat® 3056E ATAACNet Power 122 kW 164 hp

WeightsOperating Weight 20 500 kg (45,195 lb)

to 22 700 kg (50,045 lb)Transmission

Maximum Travel Speed 25 km/h 15.5 mph

M322CWheel Excavator

2

M322C Wheel ExcavatorThe C Series incorporates innovations for improved performance and versatility.

Increased lifting capacity, improved cycletimes and ease of operation lead to increasedproductivity and lower operating costs.

Serviceability

All daily maintenance points areaccessible from ground level.A centralized greasing system allowslubrication of critical points. pg. 12

✔

Buckets and Work Tools

Buckets, grapples, hammers, and quickcouplers provide a total solution packageto the end-user. Built for performanceand durability these tools deliver highproductivity, long service life andexcellent value. pg. 11

Operator Station

The new operator station designmaximizes operator comfort andvisibility. Standard features such asergonomic joysticks, soft switch paneland new monitor are some of the featuresthat help allow the operator to workcomfortably and efficiently throughoutthe work day. pg. 6

✔

Hydraulics

The hydraulic system, featuring aseparate swing pump and load-sensingsystem, provides maximum power andexceptional controllability. The newadjustable hydraulic sensitivity allowsadjustment of attachments to find thebest setup for any application. pg. 5

✔

Engine

The new Cat 3056E DIT ATAACelectronically controlled engineprovides increased horsepower.Performance, reliability, durability,excellent fuel economy, and lowsound levels help maximize workingefficiency. The engine is U.S. EPATier 2 emission certified. pg. 4

✔

✔ New Feature

3

Complete Customer Support

Your Cat dealer offers a wide rangeof services that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machine andattachment selection to replacement.pg. 15

Environmentally Responsible Design

Helping to protect our environment,the engine has low operator andspectator sound levels, longer filterchange intervals and is more fuelefficient. pg. 14

✔

Booms and Sticks

The box section design of all front endstructures provides the strength neededfor even the toughest applications.Multiple boom and stick options allowyou to pick the best match for your job.pg. 10

✔

Undercarriage

Pin-On design of outriggers and dozerblade allows for interchangeability.Heavy-duty cylinder protection andbox section design provide excellentdurability. pg. 9

Ease of Operation

The new Joystick Steering allows theoperator both to work with implementsand maneuver the machine withoutusing the steering wheel. This providessignificant improvement in operatorcomfort and productivity. pg. 8

✔

Powerful Performance. The 3056E DITATAAC engine delivers a net power of122 kW (164 hp) at the rated speed of2000 rpm, and meets U.S. EPA Tier 2emission standards.

Turbocharged and Air-to-Air Aftercooled.The turbocharger packs dense airinto the cylinders for more completecombustion, lower emissions withimproved engine performance andefficiency. The air-to-air aftercoolerreduces smoke and emissions byproviding cooler inlet air for efficientcombustion.

Cooling System. Features anelectronically controlled variablespeed on-demand fan. Driven by ahydraulic motor, fan speed is determinedby engine coolant, transmission oil,hydraulic oil and inlet manifoldtemperature. Cooler operating conditionsallow lower average fan speeds resultingin reduced fuel consumption and lowernoise levels. The electronic enginecontrol continuously compensates forthis fan load, providing consistent nethorsepower, regardless of operatingconditions.

Engine Oil. Caterpillar® engine oil isformulated to optimize engine life andperformance and is recommended foruse in Cat diesel engines. The engineoil change interval has been increasedto 500 hours.

Low Sound, Low Vibration. The 3056Edesign improves operator comfort byreducing sound and vibration.

• Operator sound level, LPA, 72 db(A)

• Spectator sound level, LWA,102 db(A)

Fuel Injection Pump. The new injectionpump is electronically controlled andhelps to reduce fuel consumption.

Service. The engine is longitudinallymounted on the right side to provideeasy access from ground level to theoil filter, oil filler, oil drain valve, fuelfilter, V-belt tightener, and oil dipstick.

4

EngineBuilt for power, reliability, low maintenance, excellent fuel economy and low emissions.

Hydraulic Pumps. The closed centerhydraulic system provides peak flowand pressure at any engine speed, foroptimum digging force with preciseimplement controllability. In additionto the main hydraulic pump, a dedicatedhydraulic pumps for swing, cooling fanmotor and pilot systems ensure best inclass performance.

Proportional Auxiliary Hydraulics.Versatility of the hydraulic system canbe expanded to utilize a wide varietyof hydraulic work tools using multiplevalve options.

High Pressure Auxiliary Circuit

• The Multi-function Valve is thecore of the Tool Control System.This system allows an operator toselect up to five pre-programmedwork tools from the monitor.These preset hydraulic parameterssupport either one-way flow ortwo-way flow.

• The dedicated Hammer FunctionValve is the best option for machinesthat will only require single directionflow and do not require the flexibilityprovided by the Multi-function Valve.

Medium Pressure Function Valve

• The Medium Pressure FunctionValve provides proportional flowthat is ideal for tilting bucketsor rotating tools.

Stick Regeneration Circuit. The stickregeneration circuit increases efficiencyand controllability for higher productivityand lower operating costs.

Hydraulic Cylinder Snubbers.The hydraulic cylinder snubbers atrod end of boom cylinders, both endsof stick cylinders and bucket cylinderrod end cushion shocks, reduce soundand increase cylinder life.

Caterpillar XT-6™ ES Hoses. To meetthe critical flexibility and strengthdemands of wheel excavator applications,XT-6 ES hoses are installed in the highpressure hydraulic system.

Caterpillar Hydraulic Oil. Maximumprotection in all hydraulic systemsagainst mechanical wear and corrosion.Its high zinc content reduces wear, andextends pump life. Provided certainrequirements are met (e.g. S•O•SSM

analysis every 500 hours), the hydraulicoil change interval is extended from2,000 hours to 4,000 hours.

5

HydraulicsFast cycle times, increased lift capacity and high bucket and stick forces combineto maximize your productivity in any job.

6

The interior layout maximizes operator space, provides exceptional comfort and reducesoperator fatigue.

Operator Station

Interior Operator Station. The operatorstation is quiet with conveniently placedcontrols, low lever and pedal effort,ergonomic seat design and highlyeffective ventilation.

Seat. A new seat with a two-tone colordesign offers adjustable back rest,lumbar support, seat cushion lengthand angle. The optional comfort seatwith air suspension and seat heatingautomatically adjusts to theoperator’s weight.

Consoles. Designed for simplicity andfunctionality. The left side console istiltable for excellent access to the cab.Dozer blade and/or outrigger controlsas well as the radio-off switch arelocated on the left console.

Automatic Climate Control. Fullyautomatic climate control adjuststemperature and air flow.

Control Convenience. Each control isplaced within easy reach of the operator.Joysticks control the implement functions,steer the machine while in first gearand activate the adjustable hydraulicsensitivity. The soft switch panel controlsthe oscillating axle, power control settings,parking brake, automatic engine speedcontrol, and other hydraulic functions.

Foot Pedals. Two-way pedals for traveland auxiliary circuits give more floorspace and reduce the need to changepositions. The foot pedal for auxiliaryhigh-pressure circuit can now be lockedin the off position and is used as afootrest for greater operator comfort.

Cab Mounts. The cab shell is attachedto the frame with viscous mounts,reducing vibration and sound.

Viewing Area. There is excellentviewing area through wide windowssurrounding the operator. The lower ofthe two-piece window can be openedseparately for better air ventilation or beslid into the upper window to completelyopen the front bay. Both front windowoptions are equipped with a multi-positionsunscreen. An optional one-piece windowis available.

Skylight. A unique large polycarbonateskylight provides excellent upwardvisibility.

Wipers. The parallel wiper systemis designed to maximize visibility.

Large Storage Compartment. A largestorage space behind the seat withoptional cover, provides sufficientroom for a lunch box.

Easy Access. Conveniently located grabirons and large steps mounted to theundercarriage, together with a tiltablesteering column and tiltable left sideconsole, provide easy access to the cab.

7

Monitor. The new, compact monitorenhances viewing while displaying avariety of language-based informationthat is easy to read and understand.

– Pre-start system alerts the operator tolow coolant and hydraulic oil levelsprior to starting.

– Filter and oil change warnings aredisplayed when the number of hoursreaches the maintenance interval.

– Tool select function allows theoperator to select a pre-definedhydraulic work tool.

– Adjustable braking characteristicsenables an operator to select three levelsof travel motor retarder aggressivenesswhen releasing the travel pedal.

– 23 different languages are availableon the M322C.

Joystick Steering. Enables an operatorto reposition the machine in the firstgear while simultaneously workingwith the implements, keeping bothhands on the joysticks. The operatoris more productive using this feature.

Power Control Settings. Three modesallow the operator to choose the optimumengine and hydraulic power setting.

• Economy mode provides the bestfuel efficiency allowing lowerowning and operating costs.

• Power mode is used for normalmachine operation providing peakperformance under any operatingcondition.

• Travel mode automatically engageswhen the travel pedal is depressed.This mode provides maximum speedand drawbar pull when repositioningor moving the machine to a newwork location.

Adjustable Hydraulic Sensitivity.This hydraulic modulation controlallows an operator to adjust the sensitivityof the machine according to the jobrequirements. Four levels of sensitivitycan be selected on the soft touch panelto the right of the operator. Lower settingsprovide finite control, without sacrificingfull hydraulic power. This feature canbe quickly activated/de-activated usinga trigger on the right joystick.

8

Ease of OperationDesigned for simple, easy operation, the M322C allows the operator to focus on production.

New Drive Line Concept. The newtravel motor and transmission controlin the drive line provide comfortabletravel due to increased smoothness,improved hydraulic retarding andimproved gear shifting.

Travel Motor. The advanced travelmotor gives higher hydraulic retardingforces especially in downhill roadingby continuously using the optimaldisplacement of the travel motor forretarding. Braking characteristics canbe adjusted to the operator’s preferredlevel of retarding in three steps.

Transmission Control. Provides moreuseable speed for faster uphill traveland downhill retarding.

Heavy Duty Axles. The front axle offerswide oscillating and steering angles.The transmission is mounted directlyon the rear axle for protection andoptimum ground clearance.

Advanced Disc Brake System. The newdisc brake system works directly on thehub instead of the drive shaft to avoidplanetary gear backlash. This eliminatesthe rocking effect associated withworking free on wheels. The new axleis designed for low maintenance and theoil change intervals have been increasedfrom 1,000 to 2,000 hours furtherreducing owning and operating costs.

Undercarriage Design. A rigid, weldedframe provides excellent durability.Efficient hydraulic lines routing,transmission protection and heavyduty axles make the undercarriageperfect for wheel excavator applications.Both outriggers and dozer blade arepin-on for maximum flexibility.An optional work tool restraint baris available.

Outriggers. The pin-on design allowsthe outriggers to be mounted on thefront and/or rear for maximum operatingstability when digging or lifting and areindividually controlled for levelingon slopes.

Dozer Blade. The pin-on designallows the dozer blade to be mountedon the front and/or rear and is usedfor leveling, clean-up work and forstabilizing the machine during diggingapplications. The large dozer bottomand parallel design provide minimizedground pressure.

Tool Box. A large sealed and lockabletool box is mounted on the undercarriagebetween the steps on the machine’s leftside. A second optional tool box isavailable for the right side.

9

UndercarriageUndercarriage and axle design provides maximum strength, flexibility and mobility on wheels.

Design. Booms and sticks are welded,box section structures with thick,multi-plate fabrications in high stressareas and are built for performanceand long service life.

Flexibility. The choice of two boomsand three sticks provides the rightcombination of reach and diggingforces for all applications.

One-Piece Boom. The one-piece boom(5.65 m/18 ft 6 in) fits best for all standardapplications such as truck loading anddigging. The straight section reducesstress flow and helps increase thelifetime of the boom.

Variable Adjustable (VA) Boom.The variable adjustable boom(5.44 m/17 ft 10 in) offers improvedright side visibility and machine roadingbalance. When working in tight quartersor lifting heavy loads, the VA boomoffers the best flexibility. Hammer useis permitted.

Sticks. Three different stick lengths areoffered to match different applicationrequirements:

• Short stick (2.2 m/7 ft 3 in) formaximum breakout force andlifting capability.

• Medium stick (2.5 m/8 ft 2 in) forgreater crowd force and lift capacity.

• Long stick (2.9 m/9 ft 6 in) forgreater depth and reach requirements.

10

Booms and SticksDesigned for maximum flexibility to keep production high on all jobs.

Buckets. Caterpillar offers fourexcavating buckets and four ditchcleaning buckets.

Tip Selection. The following tips areavailable for the M318C:

• Long tips

• Short tips

• Abrasive tips

• Penetration tips

• Sharp corner tips

• Wide tips

Available Couplers. There are severalhydraulic couplers available forthe M322C.

• Quick Couplers enable the operatorto simply release one work tool andpick up another. This makes theexcavator highly versatile to suitthe business and application needs.

• Pin Grabber Plus Quick Couplersmultiply the versatility and utilityby allowing them to pick up anduse virtually any work tool equippedwith standard pins. Both manualand hydraulic actuated versions areavailable. The hydraulic circuit isavailable as a retrofit kit dedicated tothis coupler. Buckets can be reversedfor greater flexibility when workingaround and under obstructions.

• The dedicated Pin-Lock is a hookand pin type interface which featuresa locking mechanism to ensure asecure fit. Buckets and tools with thematching interface can be changedin about one minute and requireone pin (manually inserted into thecoupler) to couple tools into place.The Pin-Lock dedicated coupler pinsonto the stick, allowing the machineto pick up new and old stylecompetitive work tools that havePin-Lock style pockets. These toolsinclude buckets, hammers, rippersand augers.

• Tilt-Lock couplers have the samefunctionality as the Pin-Lock coupler,but with the added benefit of thetilting function. This functionalityprecisely positions a work tool basedon the work demands. This is key forbackfilling, ditch cleaning, gradingand sloping operations.

• Dedicated Wedge-Lock couplers areconsidered the standard whentalking about dedicated couplers onhydraulic excavators. This couplerdesign provides excellent durabilityin the most demanding applications.A range of buckets, hammer/compactor brackets, grapples andother tools are available for thiscoupler style.

Tool Control. The integrated ToolControl system allows for five pre-setcombinations, eliminating the need tore-set the hydraulic parameters eachtime a tool is changed. Specific flowand pressure can be programmed easilyas well as one-way/two-way hydraulicfunctions. Each of the five programmedtools can even be given a specific namevia the monitor.

Work Tools. A variety of work tools areavailable from Caterpillar, includingbuckets, quick couplers, grapples,hammers and many others to meetyour application requirements.

Multi-Processor. The CaterpillarMulti-Processors can be equippedwith different jaw types dependingon your need.

• CC-jaws combi cutter

• CR-jaws concrete cutter

• PP-jaws primary pulverizer

• PS-jaws secondary pulverizer

• S-jaws steel

Multi-Grapple. The Multi-Grapple withunlimited left and right rotation is theideal tool for stripping, sorting, handlingand loading.

Orange Peel Grapple. Specificallydesigned for handling scrap and rockin recycling and transfer applications.

Clamshell. For applications requiringvertical excavation capability or inmaterial transfer needs, a clamshellprovides an ideal solution. The free-swinging tool increases the workingenvelop of your excavator.

Hammer. With their wide variety oftools, Cat hammers provide the perfectmatch for maximum life, efficiency andproductivity.

11

Buckets and Work ToolsA wide variety of buckets and work tools help optimize machine performance.

Easy Access. Gull-wing doors, withpneumatically-assisted lift cylinders,effortlessly lift up for exceptionalaccess to the engine and all servicepoints. An additional toolbox locatedunder the step leading to the upperplatform offers clean, dry storagefor the operator.

Ground Level Service. The fuel/waterseparator, engine oil filter, battery,radiator fluid level, fuel filter, engineoil gauge, hydraulic oil level andair cleaner are all easily accessibleat ground level allowing criticalmaintenance to be performed quicklyand efficiently.

Easy to Clean Coolers. Flat fins onall coolers reduce clogging and makeit easier to remove debris.

Swing-Up AC Condenser. Without usingtools, the AC condenser swings upvertically to allow cleaning on bothsides as well as clear access to theoil cooler.

Front Compartment. The right frontservice compartment tilts providingground level access to the batteries,ATAAC, AC condenser and the air filter.

Air Filter. Caterpillar Radial Seal airfilters eliminate the use of service tools,reducing maintenance time. The air filterfeatures a double-element constructionand built-in precleaner for superiorcleaning efficiency. When the air cleanerplugs, a warning is displayed on themonitor screen inside the cab.

Capsule Filter. The hydraulic returnfilter, a capsule filter, is situated insidethe hydraulic tank. This filter preventscontaminants from entering the systemwhen the hydraulic oil is changed.

Engine Inspection. The engine can beaccessed from both ground level and theupper structure. The longitudinal layoutensures that all daily inspection itemscan be accessed from ground level.The engine and pump compartmentare separated by a steel wall.

Remote Greasing Block. A greasingblock located in the engine compartmentwith two grease points for the swingbearing and one for the front endattachment delivers grease to hardto reach locations. For the lowerundercarriage, two remote blocksgive easy access for greasing to theoscillating axle and, as an option,the dozer blade.

Water Separator. The water separatorremoves water from fuel even whenunder pressure. For ease of service,the water separator is in the enginecompartment.

12

Extended service intervals and easy access reduce operating costs.

Serviceability

Fuel Tank Drain. Located at the bottomof the upper frame, the fuel tank drainwith hose connection allows simple,spill free fluid draining.

Hydraulic Tank Drain. Located in theengine compartment, the hydraulic tankdrain with hose connection enablessimple, spill free fluid changes.

Handrails and Steps. Large handrailsand steps assist the operator in climbingon and off the machine.

Anti-Skid “Punched-Star” Plate.Anti-skid punched-star plate covers thetop of the steps and upper structure tohelp prevent slipping during maintenance.

Extended Service Intervals. M322Cservice and maintenance intervals havebeen extended to reduce machine servicetime, increase machine availability andreduce operating costs. Using ScheduledOil Sampling analysis (S•O•SSM),hydraulic oil change intervals canbe extended from 2,000 hours to4,000 hours. Engine coolant changeintervals are 12,000 hours with CatExtended Life Coolant/Anti-freeze.

Scheduled Oil Sampling. Caterpillarhas specially developed (S•O•SSM) OilSampling Analysis to help ensure betterperformance, longer life and increasedcustomer satisfaction. It is a thoroughand reliable early warning system whichdetects traces of metals, dirt and othercontaminants in your engine, axle andhydraulic oil. It can predict potentialtrouble early avoiding costly failures.Your Caterpillar dealer can give youresults and specific recommendationsshortly after receiving your sample.

Electronic Technician. The electronicengine and machine controllers providedetailed diagnostic capability for servicetechnicians. The ability to store activeand intermittent indicators simplifiesproblem diagnosis and reduces totalrepair time, resulting in improvedmachine availability and loweroperating cost.

Caterpillar Product Link System.The Product Link system includesa transceiver module (on-board themachine), office application PC softwareand a satellite communications networkto track machine hours, location andwarnings. Product Link simplifiesmaintenance scheduling, fleetmanagement and product problemevent tracking and diagnosis. (PL-321)

13

More Performance. The M322C isdesigned to provide more performanceyet uses less fuel than ever before.This means more work done in a day,less fuel consumed and minimalimpact on the environment.

Low Exhaust Emissions. The Cat 3056Eused in the M322C is a low emissionengine designed to meet US EPAnon-road Tier 2 emission regulations.

Quiet Operation. The noise level insidethe cab and as well the outside spectatorsound are extremely low.

Automatic Engine Control. AutomaticEngine Control (AEC) reduces enginerpm if no operation is performed,maximizing fuel efficiency and reducingsound levels.

Ozone Protection. To help protect theearth’s ozone layer, the air conditioningunit uses only R-134a refrigerantwhich does not contain harmfulchlorofluorocarbons (CFC’s).

Biodegradable Hydraulic Oil.The biodegradable hydraulic oil(HEES™) is formulated to provideexcellent high-pressure and high-temperature characteristics and isfully compatible with the all hydrauliccomponents. HEES is fully decomposedby soil or water microorganisms,providing a more environmentally-sound alternative to mineral-based oils.This is available as an option.

Fewer Leaks and Spills.Lubricant fillers and drains aredesigned to minimize spills.

Longer Service Intervals.Working close with your CaterpillarDealer can help extend service intervalsfor engine oil, hydraulic oil, axle oil,and coolant meaning less requiredfluids. This means less disposal, alladding up to lower operating costs.

14

Environmentally Responsible DesignThe M322C helps build a better world and preserve the fragile environment.

Product Support. You will find nearlyall parts at our dealer parts counter.Cat dealers utilize a worldwide computernetwork to find in-stock parts to minimizemachine downtime. You can save moneywith Cat remanufactured components.

Machine Selection. Make detailedcomparisons of the machines you areconsidering before you buy. What arejob requirements, machine attachmentsand operating hours? What productionis needed? Your Cat dealer can providerecommendations.

Purchase. Look past the initial price.Consider the financing options availableas well as day-to-day operating costs.This is also the time to look at dealerservices that can be included in the costof the machine to yield lower equipmentowning and operating costs over thelong run.

Customer Support Agreements.Cat dealers offer a wide variety ofproduct support agreements, and workwith customers to develop a plan thatbest meets specific needs. These planscan cover the entire machine, includingattachments, to help protect thecustomer’s investment.

Operation. Improving operatingtechniques can boost your profits.Your Cat dealer has videotapes,literature and other ideas to help youincrease productivity, and Caterpillaroffers certified operator trainingclasses to help maximize the returnon your machine investment.

Maintenance Services. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs such asS•O•SSM analysis and Coolant Samplingand Technical Analysis help avoidunscheduled repairs.

Replacement. Repair, rebuild orreplace? Your Cat dealer can helpyou evaluate the cost involved so youcan make the right choice.

15

Complete Customer SupportCat dealer services help you operate longer with lower costs.

16 M322C Wheel Excavator specifications

Cab

Cab/FOGS option ISO 10262

Hydraulic System

Tank Capacity 225 L 59 galSystem Capacity 350 L 92 galMaximum Pressure

Implements 35 000 kPa 5,076 psiTravel 35 000 kPa 5,076 psi

Maximum Flow 340 L/min 90 gal/minAuxiliary System – 3100 kPa 450 psiMedium Pressure MaxAuxiliary System – 49 L/min 13 gal/minMedium Pressure Max FlowAuxiliary System – 32 998 kPa 4,786 psiHigh Pressure MaxAuxiliary System – 340 L/min 90 gal/minHigh Pressure Max Flow

Transmission

Maximum Travel Speed 25 km/h 15.5 mph1st Gear, Forward/Reverse 8 km/h 5 mph2nd Gear, Forward/Reverse 25 km/h 15.5 mphCreeper Speed (1st Gear) 4 km/h 2.5 mphCreeper Speed (2nd Gear) 11 km/h 6.8 mphDrawbar Pull 112 kN 25,179 lbMaximum Gradeability 62 %

Service Refill Capacities

Fuel Tank Capacity 385 L 102 galCooling 39 L 10 galEngine Crankcase 16 L 4.2 galRear Axle Housing 14.5 L 3.8 gal(Differential)Front Steering Axle 11 L 2.9 gal(Differential)Final Drive 2.5 L 0.7 galPowershift Transmission 2.5 L 0.7 gal

Tires

Standard 11.00-20 dual pneumaticOptional See Optional Equipment

Engine

Engine Model Cat 3056E ATAACGross Power 127 kW 170 hpNet Power 122 kW 164 hpISO 9249 122 kW 164 hpEEC 80/1269 122 kW 164 hpBore 100 mm 3.94 inStroke 127 mm 5 inDisplacement 6 L 366 in3

Cylinders 6Maximum Torque at 1,400 rpm 695 N•m 513 lb ft

• Ratings at 2,000 rpm.

• The 3056E ATAAC engine meets U.S. EPA non-road Tier 2emission requirements.

• Net power advertised is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, mufflerand alternator.

• No engine derating required below 3000 m (9,840 ft).

Weights

Operating Weight 20 500 kg (45,195 lb) to 22 700 kg (50,045 lb)

VA BoomRear dozer only 21 000 kg 46,297 lbRear dozer, front outriggers 22 300 kg 49,163 lbFront and rear outriggers 22 700 kg 50,044 lb

One-Piece BoomRear dozer only 20 500 kg 45,195 lbRear dozer, front outriggers 21 800 kg 48,061 lbFront and rear outriggers 22 200 kg 48,943 lb

Dozer Blade 900 kg 1,984 lbOutriggers 1300 kg 2,866 lbCounterweight 3900 kg 8,598 lb2.21 m (7’3”) Stick 580 kg 1,279 lb2.48 m (8’2”) Stick 600 kg 1,323 lb2.78 m (9’2”) Stick 670 kg 1,477 lb

Swing Mechanism

Swing Speed 10.5 rpmSwing Torque 56.3 kN•m 41,525 lb ftMaximum Flow 112 L/min 30 gal/minPressure 31 000 kPa 4,496 psi

17M322C Wheel Excavator specifications

➤ 4➤

➤➤ 3

➤

➤

➤

➤

1

➤

➤

6

➤

➤

5

2

➤2670 mm8'9"

➤➤ 2750 mm9'

➤

➤➤

➤

➤

3960 mm13'

120 mm4.7"

360 mm (1'2")

➤➤ 3480 mm11'5"

➤

➤

3980 mm13'1"

➤

➤➤ 4503 mm14'9"

➤➤2750 mm

9' ➤➤1100 mm

3'7"

➤

500 mm1'8"

➤

➤➤ 2750 mm9'

➤➤

➤➤1075 mm

3'6"

➤➤ 5210 mm17'1"

1300 mm4'3" ➤➤

1100 mm3'7"

➤

500 mm1'8"

➤

➤➤ 5250 mm17'3"

➤➤ ➤➤ ➤1075 mm

3'6"1300 mm

4'3"800 mm

2'8"

➤

325 mm1'1"

VA boom One-piece boommm ft/in mm ft/in

1 Shipping height

2.5 m/8'2" stick 3230 10'7" 3250 10'8"

2.9 m/9'6" stick 3250 10'8" 3290 10'10"

2 Shipping length

2.5 m/8'2" stick 9440 31' 9640 31'8"

2.9 m/9'6" stick 9430 30'11" 9650 31'8"

3 Support point

2.5 m/8'2" stick 3660 12' 3720 12'2"

2.9 m/9'6" stick 3420 11'3" 3440 11'3"

4 Tail swing radius 2750 9' 2750 9'

5 Counterweight clearance 1307 4'3" 1307 4'3"

6 Cab height 3200 10'6" 3200 10'6"

DimensionsAll dimensions are approximate.

Undercarriage with dozer only Undercarriage with 2 setsof outriggers

Undercarriage with 1 set of outriggers and dozer

Roading positionwith 2.5 m/8'2" stick


Stick Length 2.2 m (7'3") 2.5 m (8'2") 2.9 m (9'6")1 Maximum 10 380 mm 10 410 mm 10 710 mm

Digging Height (34'1") (34'2") (35'2")2 Maximum 6970 mm 7000 mm 7300 mm

Dump Height (22'10") (23'0") (23'11")3 Maximum 5980 mm 6280 mm 6680 mm

Digging Depth (19'7") (20'7") (21'11")4 Maximum Vertical 4430 mm 4470 mm 4830 mm

Wall Digging Depth (14'6") (14'8") (15'10")5 Maximum Depth

2.5 m (8'2") 5775 mm 6090 mm 6507 mmStraight Clean-up (18'11") (20'0") (21'4")

6 Maximum Reach 9710 mm 9940 mm 10 330 mm(31'10") (32'7") (33'11")

7 Maximum Reach 9530 mm 9760 mm 10 160 mmat Ground Level (31'3") (32'0") (33'4")

Bucket Forces 131 kN 131 kN 131 kN(ISO 6015) (29,450 lb) (29,450 lb) (29,450 lb)Stick Forces 115 kN 106 kN 97 kN(ISO 6015) (25,853 lb) (23,830 lb) (21,810 lb)

VA Boom Working Ranges5.44 m (17'10") Variable adjustable boom, 1511 mm (59") tip radius bucket

Stick Length 2.2 m (7'3") 2.5 m (8'2") 2.9 m (9'6")1 Maximum 9670 mm 9540 mm 9760 mm

Digging Height (31'9") (31'4") (32'0")2 Maximum 6300 mm 6230 mm 6450 mm

Dump Height (20'8") (20'5") (21'2")3 Maximum 5770 mm 6070 mm 6470 mm

Digging Depth (18'11") (19'11") (21'3")4 Maximum Vertical 4480 mm 4780 mm 5160 mm

Wall Digging Depth (14'8") (15'8") (16'11")5 Maximum Depth

2.5 m (8'2") 5565 mm 5580 mm 6297 mmStraight Clean-up (18'3") (18'4") (20'8")

6 Maximum Reach 9890 mm 10 100 mm 10 490 mm(32'5") (33'2") (34'5")

7 Maximum Reach 9720 mm 9930 mm 10 320 mmat Ground Level (31'11") (32'7") (33'10")

Bucket Forces 131 kN 131 kN 131 kN(ISO 6015) (29,450 lb) (29,450 lb) (29,450 lb)Stick Forces 115 kN 106 kN 97 kN(ISO 6015) (25,853 lb) (23,830 lb) (21,810 lb)

One-piece Boom Working Ranges5.65 m (18'6") One-piece boom, 1511 mm (59") tip radius bucket

1

3

2

45

6

7

10 9 8 7 6 5 4 3 2 1 0 2 31

35 30

11

25 20 15 10 5 50

1

2

3

4

5

6

7

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

MetersFeet

0

5

10

15

20

25

5

10

15

20

25

30

35

Meters

Feet

2.5 m (8'2")2.9 m (9'6")

2.2 m (7'3")

1

2

3

4

5

6

7

10 9 8 7 6 5 4 3 2 1 0 2 31

35 30

11

25 20 15 10 5 50

1

2

3

4

5

6

7

8

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

MetersFeet

0

5

10

15

20

25

5

10

15

20

25

30

35

Meters

Feet

2.5 m (8'2")2.9 m (9'6")

2.2 m (7'3")


Variable adjustable boom One-piece boom5440 mm (17'10") 5050 mm (16'7")

2 sets Dozer 2 sets DozerDozer of stabilizer and stabilizer Dozer of stabilizer and stabilizerlowered lowered lowered lowered lowered lowered(mm) 2200 2500 2900 2200 2500 2900 2200 2500 2900 2200 2500 2900 2200 2500 2900 2200 2500 2900

Without quick coupler Stick length (ft/in) 7'3" 8'2" 9'6" 7'3" 8'2" 9'6" 7'3" 8'2" 9'6" 7'3" 8'2" 9'6" 7'3" 8'2" 9'6" 7'3" 8'2" 9'6"

Hammers H115 s, H120C sH130 s × × × × × ×

CC × × × × ×Multiprocessors MP15 CR, S × ×

PP, PS × × × × × × × × ×MP20 × × × × × × × × × × × × × ×

360° rotatable Shears S325 × × × × × ×(boom mounted) S340 × × × × × ×Multi-Grapples G315B D, R × ×

G320B D × × × × × × × × × × × × × × × ×Compactors CVP110

400 L (0.5 yd3)

GSH15 500 L (0.67 yd3)

Orange Peel Grapples 600 L (0.75 yd3) × × × × × ×(4 tines) 800 L (1.00 yd3) × × × × × ×

600 L (0.75 yd3) × × × × × ×GSH20 800 L (1.00 yd3) × × × × × × × × × ×

1000 L (1.25 yd3) × × × × × × × × × ×

360° Working Range Maximum Material density 1800 kg/m3 (3,000 lb/yd3)Maximum Material density 1200 kg/m3 (2,000 lb/yd3)Over the front only

× Not Compatible

Work Tools Matching GuideWhen choosing between various work tool models that can be installed onto the same machine configuration, consider work tool application, productivity requirements, and durability. Refer to work tool specifications for application recommendations and productivity information.

• Not all work tools are available in all areas.


• All bucket recommendations are subject to material density.• All excavation buckets have 1511 mm (59") tip radius with long teeth.• Buckets are not drilled for sidecutters.• All excavation buckets include weld-on tooth adapters.• Tilting ditch cleaning bucket weights include tilt mounting device.• All buckets come with adjuster group.• All weights are without tips.• J300 tips required, except for 55" extreme excavation with J350 tips.

Bucket SpecificationsContact your Caterpillar dealer for special bucket requirements.

Bucket type

Excavation

Extreme Excavation

Ditch Cleaning, tiltable

Ditch Cleaning, rigid

mm kg m3in lb yd3

Wid

th

Wei

ght

Capa

city

(SAE

)

No.

of

Teet

h

Buckets without Quick Coupler

600 24 585 1290 0.43 0.57 3750 30 576 1272 0.54 0.71 3990 39 677 1493 0.85 1.12 4

1200 47 757 1669 1.04 1.36 51245 49 773 1706 1.12 1.47 51300 51 791 1746 1.18 1.55 51400 55 826 1823 1.26 1.65 61400 55 826 1823 1.29 1.69 51500 59 861 1900 1.40 1.84 5750 30 600 1323 0.58 0.77 31245 49 801 1766 1.13 1.48 41300 51 830 1832 1.17 1.54 51400 55 868 1914 1.26 1.65 61800 71 493 1087 0.43 0.562000 79 593 1190 0.57 0.752300 91 900 1990 0.62 0.812000 79 670 1475 0.70 0.91


Lift Capacities with VA boom – 5.44 m (17'10")

Metric Units/all weights are in metric tons

Stick2.2 m (7'3")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t 5.7 3.9Rear dozer down t *6.0 4.4Rear stab down t *6.0 5.32 sets stab down t *6.0 *6.0Dozer and stab down t *6.0 *6.0

4.5 m Rear dozer up t *7.8 6.0 5.6 3.9 3.8 2.5Rear dozer down t *7.8 6.8 *6.4 4.4 *5.6 2.9Rear stab down t *7.8 *7.8 *6.4 *5.2 *5.6 3.52 sets stab down t *7.8 *7.8 *6.4 *6.4 *5.6 5.2Dozer and stab down t *7.8 *7.8 *6.4 6.3 *5.6 4.3

3.0 m Rear dozer up t 8 .3 5.8 5.5 3.8 3.8 2.5 *2.4 1.9 8.60 mRear dozer down t *9.5 6.5 *7.1 4.3 *5.9 2.9 *2.4 2.2Rear stab down t *9.5 7.7 *7.1 5.1 5.7 3.5 *2.4 *2.42 sets stab down t *9.5 *9.5 *7.1 *7.1 *5.9 5.2 *2.4 *2.4Dozer and stab down t *9.5 9.5 *7.1 6.1 *5.9 4.3 *2.4 *2.4

1.5 m Rear dozer up t *12.2 10.1 8.3 5.6 5.5 3.8 3.7 2.5 *2.4 1.9 8.69 mRear dozer down t *12.2 11.8 *10.7 6.4 *7.7 4.3 *6.1 2.8 *2.4 2.1Rear stab down t *12.2 *12.2 *10.7 7.7 *7.7 5.1 5.7 3.4 *2.4 *2.42 sets stab down t *12.2 *12.2 *10.7 *10.7 *7.7 7.2 *6.1 5.1 *2.4 *2.4Dozer and stab down t *12.2 *12.2 *10.7 9.3 *7.7 6.1 *6.1 4.2 *2.4 *2.4Rear dozer up t *15.1 10.0 8.3 5.5 5.5 3.6 3.6 2.4 *2.5 1.9 8.48 mRear dozer down t *15.1 11.7 *10.9 6.3 *7.8 4.1 *6.1 2.7 *2.5 2.2Rear stab down t *15.1 14.8 *10.9 7.7 *7.8 5.0 5.5 3.3 *2.5 *2.52 sets stab down t *15.1 *15.1 *10.9 *10.9 *7.8 *7.2 *6.1 5.0 *2.5 *2.5Dozer and stab down t *15.1 *15.1 *10.9 9.3 *7.8 6.2 *6.1 4.1 *2.5 *2.5

-1.5 m Rear dozer up t 16.6 9.8 8.2 5.3 5.2 3.4 3.5 2.3 *2.8 2.1 7.94 mRear dozer down t *17.9 11.4 *11.1 6.1 *8.0 3.9 *3.6 2.6 *2.8 2.4Rear stab down t *17.9 14.8 *11.1 7.5 *8.0 4.8 *3.6 3.2 *2.8 *2.82 sets stab down t *17.9 *17.9 *11.1 *11.1 *8.0 7.1 *3.6 *3.6 *2.8 *2.8Dozer and stab down t *17.9 *17.9 *11.1 9.5 *8.0 5.9 *3.6 *3.6 *2.8 *2.8

-3.0 m Rear dozer up t 16.7 9.8 8.2 5.3 5.0 3.2Rear dozer down t *18.5 11.5 *11.3 6.0 *6.5 3.7Rear stab down t *18.5 14.8 *11.3 7.4 *6.5 4.62 sets stab down t *18.5 *18.5 *11.3 *11.3 *6.5 *6.5Dozer and stab down t *18.5 *18.5 *11.3 9.3 *6.5 5.7

Undercarriage configuration

* Indicates that the load is limitedby hydraulic capacity rather than tippingcapacity. Lift capacity ratings are basedon SAE standard JISO 10567. Rated loadsdo not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity.

• Lifting values are without bucketor coupler installed.

Load Point Height

Load Radius Over Front

Load Radius Over Side

Load at Maximum Reach

Load Radius Over Rear

English Units/all weights are in lbs (multiply by 1,000)

Stick2.2 m (7'3")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb 12.5 8.5Rear dozer down lb *13.2 9.7Rear stab down lb *13.2 11.62 sets stab down lb *13.2 *13.2Dozer and stab down lb *13.2 *13.2

15.0 ft Rear dozer up lb *17.1 13.2 12.3 8.5 8.3 5.5Rear dozer down lb *17.1 14.9 *14.1 9.7 *12.3 6.3Rear stab down lb *17.1 *17.1 *14.1 *11.4 *12.3 7.72 sets stab down lb *17.1 *17.1 *14.1 *14.1 *12.3 11.4Dozer and stab down lb *17.1 *17.1 *14.1 13.8 *12.3 9.4

10.0 ft Rear dozer up lb 18.2 12.7 12.1 8.3 8.3 5.5 *5.2 4.1 28'2"Rear dozer down lb *20.9 14.3 *15.6 9.4 *13.0 6.3 *5.2 4.8Rear stab down lb *20.9 16.9 *15.6 11.2 12.5 7.7 *5.2 *5.22 sets stab down lb *20.9 *20.9 *15.6 *15.6 *13.0 11.4 *5.2 *5.2Dozer and stab down lb *20.9 20.9 *15.6 13.4 *13.0 9.4 *5.2 *5.2

5.0 ft Rear dozer up lb *26.8 22.2 18.2 12.3 12.1 8.3 8.1 5.5 *5.2 4.1 28'6"Rear dozer down lb *26.8 26.0 *23.5 14.1 *16.9 9.4 *13.4 6.1 *5.2 4.6Rear stab down lb *26.8 *26.8 *23.5 16.9 *16.9 11.2 12.5 7.4 *5.2 *5.22 sets stab down lb *26.8 *26.8 *23.5 *23.5 *16.9 15.8 *13.4 11.2 *5.2 *5.2Dozer and stab down lb *26.8 *26.8 *23.5 20.5 *16.9 13.4 *13.4 9.2 *5.2 *5.2Rear dozer up lb *33.2 22.0 18.2 12.1 12.1 7.9 7.9 5.2 *5.5 4.1 27'10"Rear dozer down lb *33.2 25.7 *24.0 13.8 *17.1 9.0 *13.4 5.9 *5.5 4.8Rear stab down lb *33.2 32.6 *24.0 16.9 *17.1 11.0 12.1 7.2 *5.5 *5.52 sets stab down lb *33.2 *33.2 *24.0 *24.0 *17.1 *15.8 *13.4 11.0 *5.5 *5.5Dozer and stab down lb *33.2 *33.2 *24.0 20.5 *17.1 13.6 *13.4 9.0 *5.5 *5.5

-5.0 ft Rear dozer up lb *36.5 21.6 18.0 11.6 11.4 7.4 7.7 5.0 *6.1 4.6 26'0"Rear dozer down lb *39.4 25.1 *24.4 13.4 *17.6 8.5 *7.9 5.7 *6.1 5.2Rear stab down lb *39.4 32.6 *24.4 16.5 *17.6 10.5 *7.9 7.0 *6.1 *6.12 sets stab down lb *39.4 *39.4 *24.4 *24.4 *17.6 15.6 *7.9 *7.9 *6.1 *6.1Dozer and stab down lb *39.4 *39.4 *24.4 20.9 *17.6 13.0 *7.9 *7.9 *6.1 *6.1

-10.0 ft Rear dozer up lb *36.8 21.6 18.0 11.6 11.0 7.0Rear dozer down lb *40.7 25.3 *24.9 13.2 *14.3 8.1Rear stab down lb *40.7 32.6 *24.9 16.3 *14.3 10.12 sets stab down lb *40.7 *40.7 *24.9 *24.9 *14.3 *14.3Dozer and stab down lb *40.7 *40.7 *24.9 20.5 *14.3 12.5




Stick2.5 m (8'2")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *5.4 3.7Rear dozer down t *5.4 4.2Rear stab down t *5.4 5.02 sets stab down t *5.4 *5.4Dozer and stab down t *5.4 *5.4

4.5 m Rear dozer up t *7.1 5.8 5.4 3.6 3.5 2.3Rear dozer down t *7.1 6.6 *5.8 4.1 *5.1 2.6Rear stab down t *7.1 *7.1 *5.8 5.0 *5.1 3.22 sets stab down t *7.1 *7.1 *5.8 *5.8 *5.1 4.9Dozer and stab down t *7.1 *7.1 *5.8 *5.8 *5.1 4.1

3.0 m Rear dozer up t *11.3 10.4 8.2 5.5 5.3 3.6 3.5 2.3 *1.4 *1.4 9.29 mRear dozer down t *11.3 *11.3 *8.8 6.3 *6.6 4.0 *5.4 2.6 *1.4 *1.4Rear stab down t *11.3 *11.3 *8.8 7.6 *6.6 4.9 *5.4 3.2 *1.4 *1.42 sets stab down t *11.3 *11.3 *8.8 *8.8 *6.6 *6.6 *5.4 4.9 *1.4 *1.4Dozer and stab down t *11.3 *11.3 *8.8 *8.8 *6.6 5.9 *5.4 4.1 *1.4 *1.4

1.5 m Rear dozer up t *12.7 10.1 8.0 5.4 5.2 3.5 3.5 2.2 *1.5 1.3 9.50 mRear dozer down t *12.7 11.6 *10.2 6.2 *7.2 4.0 *5.6 2.5 *1.5 *1.5Rear stab down t *12.7 *12.7 *10.2 7.4 *7.2 4.8 5.4 3.2 *1.5 *1.52 sets stab down t *12.7 *12.7 *10.2 *10.2 *7.2 6.9 *5.6 4.8 *1.5 *1.5Dozer and stab down t *12.7 *12.7 *10.2 9.0 *7.2 5.8 *5.6 4.0 *1.5 *1.5Rear dozer up t *15.0 9.9 8.0 5.3 5.2 3.4 3.4 2.1 *1.6 1.3 9.41 mRear dozer down t *15.0 11.6 *10.5 6.1 *7.5 3.9 *5.7 2.4 *1.6 *1.6Rear stab down t *15.0 14.4 *10.5 7.5 *7.5 4.8 5.3 3.1 *1.6 *1.62 sets stab down t *15.0 *15.0 *10.5 *10.5 *7.5 6.9 *5.7 4.7 *1.6 *1.6Dozer and stab down t *15.0 *15.0 *10.5 9.1 *7.5 5.9 *5.7 3.9 *1.6 *1.6

-1.5 m Rear dozer up t 16.3 9.5 8.0 5.1 5.0 3.2 3.2 2.0 *1.7 1.4 9.03 mRear dozer down t *17.4 11.2 *10.6 5.8 *7.6 3.7 *5.2 2.3 *1.7 1.7Rear stab down t *17.4 14.6 *10.6 7.3 *7.6 4.5 5.2 2.9 *1.7 *1.72 sets stab down t *17.4 *17.4 *10.6 *10.6 *7.6 7.0 *5.2 4.6 *1.7 *1.7Dozer and stab down t *17.4 *17.4 *10.6 9.3 *7.6 5.7 *5.2 3.7 *1.7 *1.7

-3.0 m Rear dozer up t 16.4 9.5 8.0 5.0 4.8 3.0 *2.0 1.7 8.29 mRear dozer down t *18.0 11.2 *11.1 5.8 *7.0 3.5 *2.0 2.0Rear stab down t *18.0 14.6 *11.1 7.2 *7.0 4.3 *2.0 *2.02 sets stab down t *18.0 *18.0 *11.1 *11.1 *7.0 6.7 *2.0 *2.0Dozer and stab down t *18.0 *18.0 *11.1 9.2 *7.0 5.5 *2.0 *2.0

-4.5 m Rear dozer up t *15.0 9.6Rear dozer down t *15.0 11.3Rear stab down t *15.0 14.72 sets stab down t *15.0 *15.0Dozer and stab down t *15.0 *15.0


Stick2.9 m (9'6")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *5.0 3.7 *3.2 2.3Rear dozer down t *5.0 4.2 *3.2 2.6Rear stab down t *5.0 *5.0 *3.2 *3.22 sets stab down t *5.0 *5.0 *3.2 *3.2Dozer and stab down t *5.0 *5.0 *3.2 *3.2

4.5 m Rear dozer up t *6.0 5.9 5.4 3.7 3.6 2.4Rear dozer down t *6.0 *6.0 *5.5 4.1 *4.9 2.7Rear stab down t *6.0 *6.0 *5.5 5.0 *4.9 3.32 sets stab down t *6.0 *6.0 *5.5 *5.5 *4.9 *4.9Dozer and stab down t *6.0 *6.0 *5.5 *5.5 *4.9 4.1

3.0 m Rear dozer up t *11.3 10.5 8.2 5.6 5.3 3.6 3.6 2.4 *1.2 *1.2 9.69 mRear dozer down t *11.3 *11.3 *8.3 6.3 *6.3 4.1 *5.2 2.7 *1.2 *1.2Rear stab down t *11.3 *11.3 *8.3 7.6 *6.3 4.9 *5.2 3.3 *1.2 *1.22 sets stab down t *11.3 *11.3 *8.3 *8.3 *6.3 *6.3 *5.2 4.9 *1.2 *1.2Dozer and stab down t *11.3 *11.3 *8.3 *8.3 *6.3 5.9 *5.2 4.1 *1.2 *1.2

1.5 m Rear dozer up t *12.7 10.1 8.0 5.4 5.2 3.5 3.6 2.3 *1.2 *1.2 9.89 mRear dozer down t *12.7 11.6 *9.8 6.2 *7.0 4.0 *5.5 2.6 *1.2 *1.2Rear stab down t *12.7 *12.7 *9.8 7.4 *7.0 4.8 *5.3 3.3 *1.2 *1.22 sets stab down t *12.7 *12.7 *9.8 *9.8 *7.0 6.9 *5.5 4.9 *1.2 *1.2Dozer and stab down t *12.7 *12.7 *9.8 9.0 *7.0 5.8 *5.5 4.1 *1.2 *1.2Rear dozer up t *14.5 10.0 8.0 5.4 5.2 3.4 3.4 2.2 *1.3 1.2 9.81 mRear dozer down t *14.5 11.6 *10.4 6.1 *7.4 3.9 *5.7 2.5 *1.3 *1.3Rear stab down t *14.5 14.3 *10.4 7.4 *7.4 4.8 5.3 3.1 *1.3 *1.32 sets stab down t *14.5 *14.5 *10.4 *10.4 *7.4 6.8 *5.7 4.8 *1.3 *1.3Dozer and stab down t *14.5 *14.5 *10.4 9.0 *7.4 5.8 *5.7 3.9 *1.3 *1.3

-1.5 m Rear dozer up t 16.0 9.5 8.0 5.1 5.1 3.3 3.3 2.0 *1.4 1.3 9.44 mRear dozer down t *17.0 11.2 *10.5 5.8 *7.5 3.7 *5.6 2.4 *1.4 *1.4Rear stab down t *17.0 14.6 *10.5 7.3 *7.5 4.6 5.2 3.0 *1.4 *1.42 sets stab down t *17.0 *17.0 *10.5 *10.5 *7.5 7.0 *5.6 4.6 *1.4 *1.4Dozer and stab down t *17.0 *17.0 *10.5 9.2 *7.5 5.8 *5.6 3.8 *1.4 *1.4

-3.0 m Rear dozer up t 16.3 9.4 7.9 5.0 4.8 3.0 *1.7 1.5 8.75 mRear dozer down t *17.7 11.1 *10.9 5.8 *7.5 3.5 *1.7 *1.7Rear stab down t *17.7 14.5 *10.9 7.2 *7.5 4.4 *1.7 *1.72 sets stab down t *17.7 *17.7 *10.9 *10.9 *7.5 6.8 *1.7 *1.7Dozer and stab down t *17.7 *17.7 *10.9 9.2 *7.5 5.5 *1.7 *1.7

-4.5 m Rear dozer up t 16.6 9.7 7.7 4.8Rear dozer down t *17.2 11.4 *9.2 5.6Rear stab down t *17.2 14.7 *9.2 7.02 sets stab down t *17.2 *17.2 *9.2 *9.2Dozer and stab down t *17.2 *17.2 *9.2 9.0




Load Point Height









Stick2.5 m (8'2")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *11.9 8.1Rear dozer down lb *11.9 9.2Rear stab down lb *11.9 11.02 sets stab down lb *11.9 *11.9Dozer and stab down lb *11.9 *11.9

15.0 ft Rear dozer up lb *15.6 12.7 11.9 7.9 7.7 5.0Rear dozer down lb *15.6 14.5 *12.7 9.0 *11.2 5.7Rear stab down lb *15.6 *15.6 *12.7 11.0 *11.2 7.02 sets stab down lb *15.6 *15.6 *12.7 *12.7 *11.2 10.8Dozer and stab down lb *15.6 *15.6 *12.7 *12.7 *11.2 9.0

10.0 ft Rear dozer up lb *24.9 22.9 18.0 12.1 11.6 7.9 7.7 5.0 *3.0 *3.0 30'5"Rear dozer down lb *24.9 *24.9 *19.4 13.8 *14.5 8.8 *11.9 5.7 *3.0 *3.0Rear stab down lb *24.9 *24.9 *19.4 16.7 *14.5 10.8 *11.9 7.0 *3.0 *3.02 sets stab down lb *24.9 *24.9 *19.4 *19.4 *14.5 14.5 *11.9 10.8 *3.0 *3.0Dozer and stab down lb *24.9 *24.9 *19.4 *19.4 *14.5 13.0 *11.9 9.0 *3.0 *3.0

5.0 ft Rear dozer up lb *27.9 22.2 17.6 11.9 11.4 7.7 7.7 4.8 *3.3 2.8 31'2"Rear dozer down lb *27.9 25.5 *22.4 13.6 *15.8 8.8 *12.3 5.5 *3.3 *3.3Rear stab down lb *27.9 *27.9 *22.4 16.3 *15.8 10.5 11.9 7.0 *3.3 *3.32 sets stab down lb *27.9 *27.9 *22.4 *22.4 *15.8 15.2 *12.3 10.5 *3.3 *3.3Dozer and stab down lb *27.9 *27.9 *22.4 19.8 *15.8 12.7 *12.3 8.8 *3.3 *3.3Rear dozer up lb *33.0 21.8 17.6 11.6 11.4 7.4 7.4 4.6 *3.5 2.8 30'10"Rear dozer down lb *33.0 25.5 *23.1 13.4 *16.5 8.5 *12.5 5.2 *3.5 *3.5Rear stab down lb *33.0 31.7 *23.1 16.5 *16.5 10.5 11.6 6.8 *3.5 *3.52 sets stab down lb *33.0 *33.0 *23.1 *23.1 *16.5 15.2 *12.5 10.3 *3.5 *3.5Dozer and stab down lb *33.0 *33.0 *23.1 20.0 *16.5 13.0 *12.5 8.5 *3.5 *3.5

-5.0 ft Rear dozer up lb 35.9 20.9 17.6 11.2 11.0 7.0 7.0 4.4 *3.7 3.0 29'7"Rear dozer down lb *38.3 24.6 *23.3 12.7 *16.7 8.1 *11.4 5.0 *3.7 3.7Rear stab down lb *38.3 32.1 *23.3 16.0 *16.7 9.9 11.4 6.3 *3.7 *3.72 sets stab down lb *38.3 *38.3 *23.3 *23.3 *16.7 15.4 *11.4 10.1 *3.7 *3.7Dozer and stab down lb *38.3 *38.3 *23.3 20.5 *16.7 12.5 *11.4 8.1 *3.7 *3.7

-10.0 ft Rear dozer up lb 36.1 20.9 17.6 11.0 10.5 6.6 *4.4 3.7 27'2"Rear dozer down lb *39.6 24.6 *24.4 12.7 *15.4 7.7 *4.4 4.4Rear stab down lb *39.6 32.1 *24.4 15.8 *15.4 9.4 *4.4 *4.42 sets stab down lb *39.6 *39.6 *24.4 *24.4 *15.4 14.7 *4.4 *4.4Dozer and stab down lb *39.6 *39.6 *24.4 20.2 *15.4 12.1 *4.4 *4.4

-15.0 ft Rear dozer up lb *33.0 21.1Rear dozer down lb *33.0 24.9Rear stab down lb *33.0 32.42 sets stab down lb *33.0 *33.0Dozer and stab down lb *33.0 *33.0


Stick2.9 m (9'6")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *11.0 8.1 *7.0 5.0Rear dozer down lb *11.0 9.2 *7.0 5.7Rear stab down lb *11.0 *11.0 *7.0 *7.02 sets stab down lb *11.0 *11.0 *7.0 *7.0Dozer and stab down lb *11.0 *11.0 *7.0 *7.0

15.0 ft Rear dozer up lb *13.2 13.0 11.9 8.1 7.9 5.2Rear dozer down lb *13.2 *13.2 *12.1 9.0 *10.8 5.9Rear stab down lb *13.2 *13.2 *12.1 11.0 *10.8 7.22 sets stab down lb *13.2 *13.2 *12.1 *12.1 *10.8 *10.8Dozer and stab down lb *13.2 *13.2 *12.1 *12.1 *10.8 9.0

10.0 ft Rear dozer up lb *24.9 23.1 18.0 12.3 11.6 7.9 7.9 5.2 *2.6 *2.6 31'9"Rear dozer down lb *24.9 *24.9 *18.2 13.8 *13.8 9.0 *11.4 5.9 *2.6 *2.6Rear stab down lb *24.9 *24.9 *18.2 16.7 *13.8 10.8 *11.4 7.2 *2.6 *2.62 sets stab down lb *24.9 *24.9 *18.2 *18.2 *13.8 *13.8 *11.4 10.8 *2.6 *2.6Dozer and stab down lb *24.9 *24.9 *18.2 *18.2 *13.8 13.0 *11.4 9.0 *2.6 *2.6

5.0 ft Rear dozer up lb *27.9 22.2 17.6 11.9 11.4 7.7 7.9 5.0 *2.6 *2.6 32'5"Rear dozer down lb *27.9 25.5 *21.6 13.6 *15.4 8.8 *12.1 5.7 *2.6 *2.6Rear stab down lb *27.9 *27.9 *21.6 16.3 *15.4 10.5 *11.6 7.2 *2.6 *2.62 sets stab down lb *27.9 *27.9 *21.6 *21.6 *15.4 15.2 *12.1 10.8 *2.6 *2.6Dozer and stab down lb *27.9 *27.9 *21.6 19.8 *15.4 12.7 *12.1 9.0 *2.6 *2.6Rear dozer up lb *31.9 22.0 17.6 11.9 11.4 5.2 7.4 4.8 *2.8 2.6 32'2"Rear dozer down lb *31.9 25.5 *22.9 13.4 *16.3 8.5 *12.5 5.5 *2.8 *2.8Rear stab down lb *31.9 31.5 *22.9 16.3 *16.3 10.5 11.6 6.8 *2.8 *2.82 sets stab down lb *31.9 *31.9 *22.9 *22.9 *16.3 14.9 *12.5 10.5 *2.8 *2.8Dozer and stab down lb *31.9 *31.9 *22.9 19.8 *16.3 12.7 *12.5 8.5 *2.8 *2.8

-5.0 ft Rear dozer up lb 35.2 20.9 17.6 11.2 11.2 7.2 7.2 4.4 *3.0 2.8 30'11"Rear dozer down lb *37.4 24.6 *23.1 12.7 *16.5 8.1 *12.3 5.2 *3.0 *3.0Rear stab down lb *37.4 32.1 *23.1 16.0 *16.5 10.1 11.4 6.6 *3.0 *3.02 sets stab down lb *37.4 *37.4 *23.1 *23.1 *16.5 15.4 *12.3 10.1 *3.0 *3.0Dozer and stab down lb *37.4 *37.4 *23.1 20.2 *16.5 12.7 *12.3 8.3 *3.0 *3.0

-10.0 ft Rear dozer up lb 35.9 20.7 17.4 11.0 10.5 6.6 *3.7 3.3 28'8"Rear dozer down lb *39.0 24.4 *24.0 12.7 *16.5 7.7 *3.7 *3.7Rear stab down lb *39.0 31.9 *24.0 15.8 *16.5 9.7 *3.7 *3.72 sets stab down lb *39.0 *39.0 *24.0 *24.0 *16.5 14.9 *3.7 *3.7Dozer and stab down lb *39.0 *39.0 *24.0 20.2 *16.5 12.1 *3.7 *3.7

-15.0 ft Rear dozer up lb 36.5 21.3 16.9 10.5Rear dozer down lb *37.9 25.1 *20.2 12.3Rear stab down lb *37.9 32.4 *20.2 15.42 sets stab down lb *37.9 *37.9 *20.2 *20.2Dozer and stab down lb *37.9 *37.9 *20.2 19.8




Load Point Height






Stick2.2 m (7'3")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft


15.0 ft Rear dozer up lb 12.1 8.1 8.3 5.5Rear dozer down lb *14.1 9.2 *12.3 6.3Rear stab down lb *14.1 11.0 *12.3 7.72 sets stab down lb *14.1 *14.1 *12.3 11.4Dozer and stab down lb *14.1 13.6 *12.3 9.4

10.0 ft Rear dozer up lb 17.8 11.5 11.4 7.7 8.1 5.2 *5.5 4.1 28'10"Rear dozer down lb *21.1 13.2 *15.6 8.5 *13.0 6.1 *5.5 4.8Rear stab down lb *21.1 16.3 *15.6 10.5 12.3 7.4 *5.5 *5.52 sets stab down lb *21.1 *21.1 *15.6 *15.6 *13.0 11.2 *5.5 *5.5Dozer and stab down lb *21.1 20.5 *15.6 13.0 *13.0 9.2 *5.5 *5.5

5.0 ft Rear dozer up lb 16.7 10.5 11.0 7.0 7.9 5.0 *5.5 3.9 29'1"Rear dozer down lb *23.8 12.1 *16.9 8.1 *13.4 5.9 *5.5 4.6Rear stab down lb *23.8 15.2 *16.9 10.1 12.1 7.2 *5.5 *5.52 sets stab down lb *23.8 *23.8 *16.9 15.2 *13.4 10.8 *5.5 *5.5Dozer and stab down lb *23.8 19.4 *16.9 12.5 *13.4 9.0 *5.5 *5.5Rear dozer up lb 16.3 10.1 10.5 6.8 7.7 5.0 *5.7 4.1 28'5"Rear dozer down lb *24.0 11.6 *17.4 7.9 *13.4 5.7 *5.7 4.6Rear stab down lb *24.0 14.7 16.9 9.7 11.9 7.0 *5.7 5.72 sets stab down lb *24.0 23.5 *17.4 14.9 *13.4 10.8 *5.7 *5.7Dozer and stab down lb *24.0 18.7 *17.4 12.1 *13.4 8.8 *5.7 *5.7

-5.0 ft Rear dozer up lb *16.3 *16.3 16.0 10.1 10.5 6.8 7.7 5.0 *6.3 4.4 26'8"Rear dozer down lb *16.3 *16.3 *22.0 11.6 *16.5 7.7 *11.9 5.7 *6.3 5.0Rear stab down lb *16.3 *16.3 *22.0 14.7 *16.5 9.7 11.9 7.0 *6.3 6.32 sets stab down lb *16.3 *16.3 *22.0 *22.0 *16.5 14.7 *11.9 10.5 *6.3 *6.3Dozer and stab down lb *16.3 *16.3 *22.0 18.7 *16.5 12.1 *11.9 8.8 *6.3 *6.3

-10.0 ft Rear dozer up lb *23.5 19.6 16.3 10.3 10.5 6.8 *7.4 5.5 26'11"Rear dozer down lb *23.5 23.1 *18.2 11.9 *13.4 7.9 *7.4 6.1Rear stab down lb *23.5 *23.5 *18.2 14.9 *13.4 9.7 *7.4 *7.42 sets stab down lb *23.5 *23.5 *18.2 *18.2 *13.4 *13.4 *7.4 *7.4Dozer and stab down lb *23.5 *23.5 *18.2 *18.2 *13.4 12.3 *7.4 *7.4


Lift Capacities with one-piece boom – 5.65 m (18'6")


Stick2.2 m (7'3")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t .6 3.8Rear dozer down t *5.9 4.3Rear stab down t *5.9 5.22 sets stab down t *5.9 *5.9Dozer and stab down t *5.9 *5.9

4.5 m Rear dozer up t

5

5.5 3.7 3.8 2.5Rear dozer down t *6.4 4.2 *5.6 2.9Rear stab down t *6.4 5.0 *5.6 3.52 sets stab down t *6.4 *6.4 *5.6 5.2Dozer and stab down t *6.4 6.2 *5.6 4.3

3.0 m Rear dozer up t 8 .1 5.2 5.2 3.5 3.7 2.4 *2.5 1.9 8.79 mRear dozer down t *9.6 6.0 *7.1 3.9 *5.9 2.8 *2.5 2.2Rear stab down t *9.6 7.4 *7.1 4.8 5.6 3.4 *2.5 *2.52 sets stab down t *9.6 *9.6 *7.1 *7.1 *5.9 5.1 *2.5 *2.5Dozer and stab down t *9.6 9.3 *7.1 5.9 *5.9 4.2 *2.5 *2.5

1.5 m Rear dozer up t 7 .6 4.8 5.0 3.2 3.6 2.3 *2.5 1.8 8.88 mRear dozer down t *10.8 5.5 *7.7 3.7 *6.1 2.7 *2.5 2.1Rear stab down t *10.8 6.9 *7.7 4.6 5.5 3.3 *2.5 *2.52 sets stab down t *10.8 *10.8 *7.7 6.9 *6.1 4.9 *2.5 *2.5Dozer and stab down t *10.8 8.8 *7.7 5.7 *6.1 4.1 *2.5 *2.5Rear dozer up t 7 .4 4.6 4.8 3.1 3.5 2.3 *2.6 1.9 8.67 mRear dozer down t *10.9 5.3 *7.9 3.6 *6.1 2.6 *2.6 2.1Rear stab down t *10.9 6.7 7.7 4.4 5.4 3.2 *2.6 2.62 sets stab down t *10.9 10.7 *7.9 6.8 *6.1 4.9 *2.6 *2.6Dozer and stab down t *10.9 8.5 *7.9 5.5 *6.1 4.0 *2.6 *2.6

-1.5 m Rear dozer up t *7.4 *7.4 7.3 4.6 4.8 3.1 3.5 2.3 *2.9 2.0 8.14 mRear dozer down t *7.4 *7.4 *10.0 5.3 *7.5 3.5 *5.4 2.6 *2.9 2.3Rear stab down t *7.4 *7.4 *10.0 6.7 *7.5 4.4 5.4 3.2 *2.9 2.92 sets stab down t *7.4 *7.4 *10.0 *10.0 *7.5 6.7 *5.4 4.8 *2.9 *2.9Dozer and stab down t *7.4 *7.4 *10.0 8.5 *7.5 5.5 *5.4 4.0 *2.9 *2.9

-3.0 m Rear dozer up t *10.7 8.9 7.4 4.7 4.8 3.1 *3.4 2.5 7.22 mRear dozer down t *10.7 10.5 *8.3 5.4 *6.1 3.6 *3.4 2.8Rear stab down t *10.7 *10.7 *8.3 6.8 *6.1 4.4 *3.4 *3.42 sets stab down t *10.7 *10.7 *8.3 *8.3 *6.1 *6.1 *3.4 *3.4Dozer and stab down t *10.7 *10.7 *8.3 *8.3 *6.1 5.6 *3.4 *3.4




Load Point Height











Stick2.5 m (8'2")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

4.5 m Rear dozer up t 5.2 3.4 3.5 2.2Rear dozer down t *5.8 3.9 *5.1 2.6Rear stab down t *5.8 4.8 *5.1 3.22 sets stab down t *5.8 *5.8 *5.1 4.9Dozer and stab down t *5.8 *5.8 *5.1 4.0

3.0 m Rear dozer up t 7 .9 5.1 5.0 3.2 3.4 2.2 *1.5 1.4 9.46 mRear dozer down t *8.9 5.8 *6.6 3.7 *5.4 2.5 *1.5 *1.5Rear stab down t *8.9 7.2 *6.6 4.5 5.3 3.1 *1.5 *1.52 sets stab down t *8.9 *8.9 *6.6 *6.6 *5.4 4.8 *1.5 *1.5Dozer and stab down t *8.9 *8.9 *6.6 5.7 *5.4 3.9 *1.5 *1.5

1.5 m Rear dozer up t 7 .3 4.5 4.7 3.0 3.3 2.0 *1.5 1.3 9.67 mRear dozer down t *10.3 5.3 *7.2 3.4 *5.7 2.4 *1.5 *1.5Rear stab down t *10.3 6.6 *7.2 4.3 5.2 3.0 *1.5 *1.52 sets stab down t *10.3 *10.3 *7.2 6.7 *5.7 4.7 *1.5 *1.5Dozer and stab down t *10.3 8.5 *7.2 5.4 *5.7 3.8 *1.5 *1.5Rear dozer up t 7 .1 4.3 4.5 2.8 3.2 2.0 *1.6 1.3 9.58 mRear dozer down t *10.5 5.0 *7.5 3.3 *5.7 2.3 *1.6 1.5Rear stab down t *10.5 6.4 7.4 4.1 5.1 2.9 *1.6 *1.62 sets stab down t *10.5 10.4 *7.5 6.5 *5.7 4.6 *1.6 *1.6Dozer and stab down t *10.5 8.3 *7.5 5.2 *5.7 3.7 *1.6 *1.6

-1.5 m Rear dozer up t *8.2 *8.2 7.0 4.2 4.5 2.7 3.2 1.9 *1.8 1.4 9.21 mRear dozer down t *8.2 *8.2 *9.9 5.0 *7.2 3.2 *5.3 2.3 *1.8 1.6Rear stab down t *8.2 *8.2 *9.9 6.3 *7.2 4.0 5.1 2.9 *1.8 *1.82 sets stab down t *8.2 *8.2 *9.9 *9.9 *7.2 6.4 *5.3 4.5 *1.8 *1.8Dozer and stab down t *8.2 *8.2 *9.9 8.2 *7.2 5.2 *5.3 3.7 *1.8 *1.8

-3.0 m Rear dozer up t *11.3 8.4 7.1 4.3 4.5 2.8 *2.1 1.6 8.49 mRear dozer down t *11.3 10.0 *8.4 5.1 *6.1 3.2 *2.1 1.9Rear stab down t *11.3 *11.3 *8.4 6.4 *6.1 4.1 *2.1 *2.12 sets stab down t *11.3 *11.3 *8.4 *8.4 *6.1 *6.1 *2.1 *2.1Dozer and stab down t *11.3 *11.3 *8.4 8.3 *6.1 5.2 *2.1 *2.1

-4.5 m Rear dozer up t *5.5 4.6Rear dozer down t *5.5 5.3Rear stab down t *5.5 *5.52 sets stab down t *5.5 *5.5Dozer and stab down t *5.5 *5.5


Stick2.9 m (9'6")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m

6.0 m Rear dozer up t 3.6 2.3Rear dozer down t *3.7 2.7Rear stab down t *3.7 3.32 sets stab down t *3.7 *3.7Dozer and stab down t *3.7 *3.7

4.5 m Rear dozer up t 5.3 3.5 3.5 2.3Rear dozer down t *5.5 4.0 *4.8 2.6Rear stab down t *5.5 4.9 *4.8 3.22 sets stab down t *5.5 *5.5 *4.8 *4.8Dozer and stab down t *5.5 *5.5 *4.8 4.1

3.0 m Rear dozer up t 8.1 5.2 5.0 3.3 3.4 2.2 *1.2 *1.2 9.86 mRear dozer down t *8.4 5.9 *6.3 3.7 *5.2 2.5 *1.2 *1.2Rear stab down t *8.4 7.3 *6.3 4.6 *5.2 3.1 *1.2 *1.22 sets stab down t *8.4 *8.4 *6.3 *6.3 *5.2 4.8 *1.2 *1.2Dozer and stab down t *8.4 *8.4 *6.3 5.8 *5.2 3.9 *1.2 *1.2

1.5 m Rear dozer up t 7.4 4.6 4.7 3.0 3.3 2.0 *2.1 1.4 *1.3 1.2 10.05 mRear dozer down t *10.0 5.4 *7.0 3.5 *5.5 2.4 *2.1 1.7 *1.3 *1.3Rear stab down t *10.0 6.7 *7.0 4.3 5.2 3.0 *2.1 *2.1 *1.3 *1.32 sets stab down t *10.0 *10.0 *7.0 6.7 *5.5 4.7 *2.1 *2.1 *1.3 *1.3Dozer and stab down t *10.0 8.6 *7.0 5.5 *5.5 3.8 *2.1 *2.1 *1.3 *1.3Rear dozer up t 7.1 4.3 4.5 2.8 3.2 1.9 *1.4 1.2 9.97 mRear dozer down t *10.5 5.0 *7.5 3.3 *5.7 2.3 *1.4 *1.4Rear stab down t *10.5 6.4 7.4 4.1 5.1 2.9 *1.4 *1.42 sets stab down t *10.5 10.5 *7.5 6.5 *5.7 4.5 *1.4 *1.4Dozer and stab down t *10.5 8.3 *7.5 5.2 *5.7 3.7 *1.4 *1.4

-1.5 m Rear dozer up t *7.8 *7.8 7.0 4.2 4.4 2.7 3.1 1.9 *1.5 1.3 9.61 mRear dozer down t *7.8 *7.8 *10.1 4.9 *7.3 3.2 *5.5 2.2 *1.5 1.5Rear stab down t *7.8 *7.8 *10.1 6.3 7.3 4.0 5.0 2.8 *1.5 *1.52 sets stab down t *7.8 *7.8 *10.1 *10.1 *7.3 6.4 *5.5 4.5 *1.5 *1.5Dozer and stab down t *7.8 *7.8 *10.1 8.2 *7.3 5.1 *5.5 3.6 *1.5 *1.5

-3.0 m Rear dozer up t *12.4 8.3 7.0 4.3 4.4 2.7 3.2 1.9 *1.8 1.5 8.93 mRear dozer down t *12.4 9.8 *8.9 5.0 *6.5 3.2 *4.0 2.3 *1.8 1.7Rear stab down t *12.4 *12.4 *8.9 6.3 *6.5 4.0 *4.0 2.9 *1.8 *1.82 sets stab down t *12.4 *12.4 *8.9 *8.9 *6.5 6.4 *4.0 *4.0 *1.8 *1.8Dozer and stab down t *12.4 *12.4 *8.9 8.2 *6.5 5.2 *4.0 3.7 *1.8 *1.8

-4.5 m Rear dozer up t *8.7 8.6 *6.5 4.4 *4.2 2.9Rear dozer down t *8.7 *8.7 *6.5 5.2 *4.2 3.3Rear stab down t *8.7 *8.7 *6.5 *6.5 *4.2 4.22 sets stab down t *8.7 *8.7 *6.5 *6.5 *4.2 *4.2Dozer and stab down t *8.7 *8.7 *6.5 *6.5 *4.2 *4.2


Load Point Height










Stick2.5 m (8'2")

Stick2.9 m (9'6")

Load Point Height





Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

15.0 ft Rear dozer up lb 11.4 7.4 7.7 4.8Rear dozer down lb *12.7 8.5 *11.2 5.7Rear stab down lb *12.7 10.5 *11.2 7.02 sets stab down lb *12.7 *12.7 *11.2 10.8Dozer and stab down lb *12.7 *12.7 *11.2 8.8

10.0 ft Rear dozer up lb 17.4 11.2 11.0 7.0 7.4 4.8 *3.3 3.0 31'0"Rear dozer down lb *19.6 12.7 *14.5 8.1 *11.9 5.5 *3.3 *3.3Rear stab down lb *19.6 15.8 *14.5 9.9 11.6 6.8 *3.3 *3.32 sets stab down lb *19.6 *19.6 *14.5 *14.5 *11.9 10.5 *3.3 *3.3Dozer and stab down lb *19.6 *19.6 *14.5 12.5 *11.9 8.5 *3.3 *3.3

5.0 ft Rear dozer up lb 16.0 9.9 10.3 6.6 7.2 4.4 *3.3 2.8 31'8"Rear dozer down lb *22.7 11.6 *15.8 7.4 *12.5 5.2 *3.3 *3.3Rear stab down lb *22.7 14.5 *15.8 9.4 11.4 6.6 *3.3 *3.32 sets stab down lb *22.7 *22.7 *15.8 14.7 *12.5 10.3 *3.3 *3.3Dozer and stab down lb *22.7 18.7 *15.8 11.9 *12.5 8.3 *3.3 *3.3Rear dozer up lb 15.6 9.4 9.9 6.1 7.0 4.4 *3.5 2.8 31'5"Rear dozer down lb *23.1 11.0 *16.5 7.2 *12.5 5.0 *3.5 3.3Rear stab down lb *23.1 14.1 16.3 9.0 11.2 6.3 *3.5 *3.52 sets stab down lb *23.1 22.9 *16.5 14.3 *12.5 10.1 *3.5 *3.5Dozer and stab down lb *23.1 18.2 *16.5 11.4 *12.5 8.1 *3.5 *3.5

-5.0 ft Rear dozer up lb *18.0 *18.0 15.4 9.2 9.9 5.9 7.0 4.1 *3.9 3.0 30'2"Rear dozer down lb *18.0 *18.0 *21.8 11.0 *15.8 7.0 *11.6 5.0 *3.9 3.5Rear stab down lb *18.0 *18.0 *21.8 13.8 *15.8 8.8 11.2 6.3 *3.9 *3.92 sets stab down lb *18.0 *18.0 *21.8 *21.8 *15.8 14.1 *11.6 9.9 *3.9 *3.9Dozer and stab down lb *18.0 *18.0 *21.8 18.0 *15.8 11.4 *11.6 8.1 *3.9 *3.9

-10.0 ft Rear dozer up lb *24.9 18.5 15.6 9.4 9.9 6.1 *4.6 3.5 27'10"Rear dozer down lb *24.9 22.0 *18.5 11.2 *13.4 7.0 *4.6 4.1Rear stab down lb *24.9 *24.9 *18.5 14.1 *13.4 9.0 *4.6 *4.62 sets stab down lb *24.9 *24.9 *18.5 *18.5 *13.4 *13.4 *4.6 *4.6Dozer and stab down lb *24.9 *24.9 *18.5 18.2 *13.4 11.4 *4.6 *4.6

-15.0 ft Rear dozer up lb *12.1 10.1Rear dozer down lb *12.1 11.6Rear stab down lb *12.1 *12.12 sets stab down lb *12.1 *12.1Dozer and stab down lb *12.1 *12.1


Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft 30.0 ft


15.0 ft Rear dozer up lb 11.6 7.7 7.7 5.0Rear dozer down lb *12.1 8.8 *10.5 5.7Rear stab down lb *12.1 10.8 *10.5 7.02 sets stab down lb *12.1 *12.1 *10.5 *10.5Dozer and stab down lb *12.1 *12.1 *10.5 9.0

10.0 ft Rear dozer up lb 17.8 11.4 11.0 7.2 7.4 4.8 *2.6 *2.6 32'4"Rear dozer down lb *18.5 13.0 *13.8 8.1 *11.4 5.5 *2.6 *2.6Rear stab down lb *18.5 16.0 *13.8 10.1 *11.4 6.8 *2.6 *2.62 sets stab down lb *18.5 *18.5 *13.8 *13.8 *11.4 10.5 *2.6 *2.6Dozer and stab down lb *18.5 *18.5 *13.8 12.7 *11.4 8.5 *2.6 *2.6

5.0 ft Rear dozer up lb 16.3 10.1 10.3 6.6 7.2 4.4 *4.6 3.0 *2.8 2.6 32'11"Rear dozer down lb *22.0 11.9 *15.4 7.7 *12.1 5.2 *4.6 3.7 *2.8 *2.8Rear stab down lb *22.0 14.7 *15.4 9.4 11.4 6.6 *4.6 *4.6 *2.8 *2.82 sets stab down lb *22.0 *22.0 *15.4 14.7 *12.1 10.3 *4.6 *4.6 *2.8 *2.8Dozer and stab down lb *22.0 18.9 *15.4 12.1 *12.1 8.3 *4.6 *4.6 *2.8 *2.8Rear dozer up lb 15.6 9.4 9.9 6.1 7.0 4.1 *3.0 2.6 32'8"Rear dozer down lb *22.0 11.0 *16.5 7.2 *12.5 5.0 *3.0 *3.0Rear stab down lb *22.0 14.1 16.3 9.0 11.2 6.3 *3.0 *3.02 sets stab down lb *22.0 23.1 *16.5 14.3 *12.5 9.9 *3.0 *3.0Dozer and stab down lb *22.0 18.2 *16.5 11.4 *12.5 8.1 *3.0 *3.0

-5.0 ft Rear dozer up lb *17.1 *17.1 15.4 9.2 9.7 5.9 6.8 4.1 *3.3 2.8 31'6"Rear dozer down lb *17.1 *17.1 *22.0 10.8 *16.0 7.0 *12.1 4.8 *3.3 3.3Rear stab down lb *17.1 *17.1 *22.0 13.8 16.0 8.8 11.0 6.1 *3.3 *3.32 sets stab down lb *17.1 *17.1 *22.0 *22.0 *16.0 14.1 *12.1 9.9 *3.3 *3.3Dozer and stab down lb *17.1 *17.1 *22.0 18.0 *16.0 11.2 *12.1 7.9 *3.3 *3.3

-10.0 ft Rear dozer up lb *27.3 18.2 15.4 9.4 9.7 5.9 7.0 4.1 *3.9 3.3 29'3"Rear dozer down lb *27.3 21.6 *19.6 11.0 *14.3 7.0 *8.8 5.0 *3.9 3.7Rear stab down lb *27.3 *27.3 *19.6 13.8 *14.3 8.8 *8.8 6.3 *3.9 *3.92 sets stab down lb *27.3 *27.3 *19.6 *19.6 *14.3 14.1 *8.8 *8.8 *3.9 *3.9Dozer and stab down lb *27.3 *27.3 *19.6 18.0 *14.3 11.4 *8.8 8.1 *3.9 *3.9

-15.0 ft Rear dozer up lb *19.1 18.9 *14.3 9.7 *9.2 6.3Rear dozer down lb *19.1 *19.1 *14.3 11.4 *9.2 7.2Rear stab down lb *19.1 *19.1 *14.3 *14.3 *9.2 9.22 sets stab down lb *19.1 *19.1 *14.3 *14.3 *9.2 *9.2Dozer and stab down lb *19.1 *19.1 *14.3 *14.3 *9.2 *9.2



Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.

OPERATOR STATIONAir conditioner with automatic climate controlAsh tray with cigarette lighterBolt-on FOGS capabilityBottom mounted parallel wiper and washerCoat hookDrink holderFloor mat, washableFully adjustable suspensionHeater and defrosterJoysticks, adjustableLeft side console, tiltableLight, interiorLiterature holderLow fuel indicator lightOpenable two-piece front windshieldParallel mounted top and bottom wiper and washerParking brakePolycarbonate skylightPositive filtered ventilationPower supply, 12V-7ARadio, AM/FM stereo (24V)Retractable seat beltSteering column, tiltableStorage area suitable for a lunch boxSunscreen

UNDERCARRIAGEHeavy-duty axles with advanced travel motor

with adjustable braking forceOscillating front axle with remote greasingPin-on design preparation for dozer blade and outriggersTool box in undercarriageTires, 11.00-20 16PRTwo-piece drive shaftUpper carriage storage box

OTHER EQUIPMENTAutomatic swing brakeDoor locks and caps locks with Caterpillar one-key

security systemLockable tool box in upper frameMirrors, frame and cabProduct Link ready

ELECTRICALAlternator, 55ampBack-up alarmBoom working lightHeavy duty maintenance free batteriesHornMain shut-off switchRoading lights

ENGINEAutomatic engine speed controlAutomatic starting aidCat 3056E DIT ATAAC U.S. EPA Tier 2 engine,

turbocharged with air-to-air aftercoolerMuffler

HYDRAULICSCat XT-6™ ES hosesLoad-sensing plus hydraulic systemManual work modes (economy, power, travel)Oil coolerSeparate swing pumpStick regeneration circuit

LANGUAGE DISPLAY MONITORClock with 10 day backup batteryFilter/fluid change informationGauges for fuel level, engine coolant temperature

and hydraulic oil temperatureHeadlights indicatorIndicator for engine dial settingPre-start level check for hydraulic oil, engine oil coolantTurn signal indicatorWarning messagesWorking hour information


Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.

UNDERCARRIAGEDozer blade, front and/or rear mounted,

with remote greasingOptional tires

11.00-20 16PR dual tires10.00-20 solid dual tires18-R 19.5 XF single tiresSpacer rings for dual tires

Outriggers, front and/or rear mountedSecond tool box for undercarriage

OTHER EQUIPMENTAdjustable hydraulic sensitivityCat Machine Security SystemCounterweight 4400 kg (9,700 lb)Custom paintJoystick steering

BOOMS AND STICKSOne-piece boom, 5.65 m (18 ft 6 in)Variable adjustable boom (two piece), 5.44 m (17 ft 10 in)2.2 m (7 ft 3 in) stick2.5 m (8 ft 2 in) stick2.9 m (9 ft 6 in) stick

ELECTRICALRefueling pumpRotating beacon on cabWorking lights, cab mounted (front and rear)

HYDRAULICSHammer valveHydraulic lines for quick coupler-boom and stickLowering control devices for boom and stickMulti-function valve, provides up to 5 programmed tools

and tool selection from the cab (including hammer function)Proportional medium pressure functionSynthetic ester based biodegradable hydraulic oil

OPERATOR STATIONComfort seat with seat heating and air suspensionFalling objects guardFixed cab riser 1200 mm (4 ft)Fixed one-piece front windshieldHeadrestTravel speed lockVandalism guardVisor, rain protection, polycarbonate

M322C Wheel Excavator specifications 29

Notes

M322C Wheel Excavator specifications30

Notes

M322C Wheel Excavator specifications 31

Notes

R

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

© 2005 CaterpillarAll Rights Reserved

Printed in U.S.A.

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.AEHQ5533-01 (4-05)

Replaces AEHQ5533

M322C Wheel Excavator

Specalog for M322C Wheel Excavator, AEHQ5533-01

Documents

Transcript of Specalog for M322C Wheel Excavator, AEHQ5533-01