Spec Sheet Nero - Dutch Marine Contractors · 2016. 9. 23. · ONE COURSE FOR EVERY DIRECTION NERO...
3
ONE COURSE FOR EVERY DIRECTION NERO DUTCH MARINE CONTRACTORS GENERAL INFORMATION Length o.a : 30.14 m Length MLD: 28.00 m Beam MLD: 12.50 m Depth at side (1/2 L): 3.80 m Draught AFT (approx): ± 2.60 m MAIN DIMENSIONS CONTACT Phone: +31 20 3080 899 Mail: [email protected] Web: www.dutchmarinecontractors.com Yard #: 571678 (Damen Shipyards Hardinxveld) Delivery date: 2013 Flag: The Netherlands Basic Functions: Anchor handling, dredger service, supply,towing, hose handling and survey Classification: Bureau Veritas I Tug Unrestricted navigation • MACH, AUT-UMS National authorities: Dutch Shipping Inspectorate (IVW): Unrestricted service Owner: ST Marine Support, The Netherlands Details of the equipment offered by DMC is done in good faith and believed to be correct but cannot be guaranteed. Main engines: 3x Caterpillar C32 TTA Total Power: 2117 bkW (2879 bhp) at 1600 rpm Gearboxes: 3x Reintjes WAF 562 5.947:1 Propulsion: 3x Promarin fixed pitch propellers in Optima nozzles, 1700 mm Bowthruster: Hydraulically driven 200 kW (272 hp), 360° PROPULSION SYSTEM Generator sets: 2x Caterpillar C 04.4, 107,5 kVA each Hydraulic Power: Caterpillar C32 TTA, 634 kW @1800 rpm Fuel oil seperator: Alfa Laval MIB 303 Air compressor: Alup SCK 30-10 screwtype AUXILIARY EQUIPMENT Fuel Oil: 208.5 m 3 Black/gray water: 6.8 m 3 Fresh Water: 53.5 m 3 Dirty Oil: 4.4 m 3 Hydr Oil: 4.4 m 3 Lub Oil: 2.8 m 3 Bildge Water: 2.8 m 3 Fresh water (Trim): 84.5 m 3 TANK CAPACITY Bollard pull: Approx 39 tonnes Speed: 10.8 knots PERFORMANCES
Transcript of Spec Sheet Nero - Dutch Marine Contractors · 2016. 9. 23. · ONE COURSE FOR EVERY DIRECTION NERO...
ONE COURSE FOR EVERY DIRECTION
NERO
DUTCH MARINE CONTRACTORS
GENERAL INFORMATION
Length o.a : 30.14 mLength MLD: 28.00 mBeam MLD: 12.50 mDepth at side (1/2 L): 3.80 mDraught AFT (approx): ± 2.60 m
MAIN DIMENSIONS
CONTACT
Phone: +31 20 3080 899Mail: [email protected]: www.dutchmarinecontractors.com
Yard #: 571678 (Damen Shipyards Hardinxveld)Delivery date: 2013Flag: The NetherlandsBasic Functions: Anchor handling, dredger service, supply,towing, hose handling and surveyClassification: Bureau VeritasI Tug Unrestricted navigation • MACH, AUT-UMSNational authorities: Dutch Shipping Inspectorate (IVW): Unrestricted serviceOwner: ST Marine Support, The Netherlands
Details of the equipment offered by DMC is done in good faith and believed to be correct but cannot be guaranteed.
Main engines: 3x Caterpillar C32 TTATotal Power: 2117 bkW (2879 bhp) at 1600 rpmGearboxes: 3x Reintjes WAF 562 5.947:1Propulsion: 3x Promarin fixed pitch propellers in Optima nozzles, 1700 mmBowthruster: Hydraulically driven 200 kW (272 hp), 360°
PROPULSION SYSTEM
Generator sets: 2x Caterpillar C 04.4, 107,5 kVA eachHydraulic Power: Caterpillar C32 TTA, 634 kW @1800 rpmFuel oil seperator: Alfa Laval MIB 303Air compressor: Alup SCK 30-10 screwtype
AUXILIARY EQUIPMENT
Fuel Oil: 208.5 m3
Black/gray water: 6.8 m3
Fresh Water: 53.5 m3
Dirty Oil: 4.4 m3
Hydr Oil: 4.4 m3
Lub Oil: 2.8 m3
Bildge Water: 2.8 m3
Fresh water (Trim): 84.5 m3
TANK CAPACITY
Bollard pull: Approx 39 tonnesSpeed: 10.8 knots
PERFORMANCES
ONE COURSE FOR EVERY DIRECTION
NERO
DUTCH MARINE CONTRACTORS
CONTACT
Phone: +31 20 3080 899Mail: [email protected]: www.dutchmarinecontractors.com
Details of the equipment offered by DMC is done in good faith and believed to be correct but cannot be guaranteed.
Anchor: 2 x 360 kg Pool TW (HHP) (one spare)Chains: 19 mm stud-link anchor chain 275 mAnchor winch: Ridderinkhof, hydraulically drivenDeck crane: 2 x HS marine AKC 410 18 HE349.1 ton (m) @ 5.74 m; 13.5 ton (m) @ 18.00 mAnchor handling winch: Kraaijeveld KA-30/3-H-TRCapacity: 150 ton at 8 m/min pulling force (1st layer)30 ton at 32 m/min pulling force (1st layer)170 ton brake holding force (1st layer)Towing winch: Kraaijeveld KA-20-H-TRCapacity: 40 ton at 12 m/min pulling force (1st layer)12 ton at 24 m/min pulling force (1st layer)100 ton brake holding force (1st layer)Towing hook: 2 x Mampaey 20 ton SWLTugger winches: 2 x Dromec 12 ton at 4.5 m/minTowing pins: Fore WK Hydraulics four pins in row typeAft WK Hydraulics triple pin type
DECK LAY-OUT
Search light: 2 x Pesch 2000 WRadar system: 1 x Furuno, FAR 2117; 1 x Furuno, FR 8062Compass: 1 x Cassens & Plat, Reflecta 1Gyro compass: 1 x Tokimec, ES-160Echosounder: 1 x Furuno, FE-700Speedlog: 1 x Furuno, DS-80GPS: 1 x Furuno, GP-150 DChartsystem: 1 x Transas NS 4000Autopilot: 1 x Sea pilot 75VHF: 2 x Sailor, RT6222Handheld VHF: 2 x TR-20SSB: 1 x Furuno FS 1570INMARSAT-C: 2 x Thrane & Thrane Sailor 6110NAVTEX: 1 x Furuno, NX-700IRIDIUM Telephone: 1 x Sailor, SC 4000AGSM Telephone: 1 x Sagem, RT 3000AIS: 1 x Furuno, FA-150Watch alarm: 1 x Marble, 421Intercom: Sigma-700Entertainment system: 1 x Seatel, Coastal 24
NAUTICAL & COMMUNICATION EQUIPMENT
ONE COURSE FOR EVERY DIRECTION
NERO
DUTCH MARINE CONTRACTORS
CONTACT
Phone: +31 20 3080 899Mail: [email protected]: www.dutchmarinecontractors.com
Details of the equipment offered by DMC is done in good faith and believed to be correct but cannot be guaranteed.
