Solubility Curve. RECALL TYPES OF MIXTURES: SUSPENSIONS COLLOIDS SOLUTIONS All mixtures are...

39
Solutions Solubility Curve

Transcript of Solubility Curve. RECALL TYPES OF MIXTURES: SUSPENSIONS COLLOIDS SOLUTIONS All mixtures are...

  • Slide 1
  • Solubility Curve
  • Slide 2
  • RECALL TYPES OF MIXTURES: SUSPENSIONS COLLOIDS SOLUTIONS All mixtures are physically combined and can be physically separated.
  • Slide 3
  • Slide 4
  • DEFINITION A solution is a homogeneous mixture of two or more substance in a single physical state
  • Slide 5
  • Solution a mixture of two or more substances that is identical throughout can be physically separated composed of solutes and solvents the substance in the smallest amount and the one that dissolves in the solvent the substance in the larger amount that dissolves the solute Colloids (milk, fog, jello) are considered solutions Iced Tea Mix (solute) Water (solvent) Iced Tea (solution) Salt water is considered a solution. How can it be physically separated?
  • Slide 6
  • Solutes Change Solvents The amount of solute in a solution determines how much the physical properties of the solvent are changed Examples: Lowering the Freezing Point The freezing point of a liquid solvent decreases when a solute is dissolved in it. Ex. Pure water freezes at 32 0 F (0 0 C), but when salt is dissolved in it, the freezing point is lowered. This is why people use salt to melt ice. Raising the Boiling Point The boiling point of a solution is higher than the boiling point of the solvent. Therefore, a solution can remain a liquid at a higher temperature than its pure solvent. Ex. The boiling point of pure water is 212 0 F (100 0 C), but when salt is dissolved in it, the boiling point is higher. This is why it takes salt water longer to boil than fresh water.
  • Slide 7
  • TYPES OF SOLUTIONS SOLUTESOLVENTEXAMPLE GAS Air GASLIQUIDSeltzer (CO 2 ) LIQUID Antifreeze (ethyl glycol in water) SOLIDLIQUIDSea water ( salt in water) GASSOLIDCharcoal filter (poisonous gases in carbon) LIQUIDSOLIDDental filling (mercury in silver) SOLID Sterling silver (copper in silver)
  • Slide 8
  • SOLID SOLUTION Contain two or more metals called alloys Formed by melting the components and mixing them together and allowing them to cool Properties of alloys are different from the original component metals
  • Slide 9
  • TYPES OF ALLOYS ALLOYCOMPONENTUSES BabbittTin, antimony, copper Bearings Bell metalCopper, tinBells Coinage metalsCopper, tin, zincCoins 16 karat goldGold, copper, silverJewelry SterlingSilver, copperJewelry, flatware NichromeNickel, iron, chromium, manganese Heating elements
  • Slide 10
  • Important terminologies: Soluble substance that dissolves another substance Insoluble substance that does not dissolve another substance
  • Slide 11
  • Solutes Change Solvents The amount of solute in a solution determines how much the physical properties of the solvent are changed Examples: Lowering the Freezing Point The freezing point of a liquid solvent decreases when a solute is dissolved in it. Ex. Pure water freezes at 32 0 F (0 0 C), but when salt is dissolved in it, the freezing point is lowered. This is why people use salt to melt ice. Raising the Boiling Point The boiling point of a solution is higher than the boiling point of the solvent. Therefore, a solution can remain a liquid at a higher temperature than its pure solvent. Ex. The boiling point of pure water is 212 0 F (100 0 C), but when salt is dissolved in it, the boiling point is higher. This is why it takes salt water longer to boil than fresh water.
  • Slide 12
  • Slide 13
  • SOLUBILITY
  • Slide 14
  • Solubility Solubility maximum grams of solute that will dissolve in 100 g of solvent at a given temperature varies with temp based on a saturated solution
  • Slide 15
  • Solubility SATURATED SOLUTION no more solute dissolves UNSATURATED SOLUTION more solute dissolves SUPERSATURATED SOLUTION becomes unstable, crystals form increasing concentration
  • Slide 16
  • Concentration the amount of solute dissolved in a solvent at a given temperature described as unsaturated if it has a low concentration of solute described as saturated if it has a high concentration of solute described as supersaturated ifsupersaturated contains more dissolved solute than normally possible
  • Slide 17
  • C.Determine if a solution is saturated, unsaturated, or supersaturated. If the solubility for a given substance places it anywhere on it's solubility curve it is saturated. If it lies above the solubility curve, then it's supersaturated, If it lies below the solubility curve it's an unsaturated solution. Remember though, if the volume of water isn't 100 cm 3 to use a proportion first as shown above.
  • Slide 18
  • Slide 19
  • Temp. ( o C) Solubility (g/100 g H 2 O) KNO 3 (s) KCl (s) HCl (g) SOLUBILITY CURVE Solubility how much solute dissolves in a given amt. of solvent at a given temp. below Unsaturated: solution could hold more solute; below line on Saturated: solution has just right amt. of solute; on line Supersaturated: solution has too much solute dissolved in it; above the line
  • Slide 20
  • Solubility Table LeMay Jr, Beall, Robblee, Brower, Chemistry Connections to Our Changing World, 1996, page 517 0 10 20 30 40 50 60 70 80 90 100 Solubility vs. Temperature for Solids Solubility (grams of solute/100 g H 2 O) KI KCl 20 10 30 40 50 60 70 80 90 110 120 130 140 100 NaNO 3 KNO 3 HClNH 4 Cl NH 3 NaCl KClO 3 SO 2 shows the dependence of solubility on temperature gases solids
  • Slide 21
  • Solubility Solids are more soluble at... Solids are more soluble at... high temperatures. Gases are more soluble at... low temperatures & high pressures (Henrys Law). EX: nitrogen narcosis, the bends, soda
  • Slide 22
  • How to use a solubility graph? A.IDENTIFYING A SUBSTANCE ( given the solubility in g/100 cm 3 of water and the temperature) Look for the intersection of the solubility and temperature.
  • Slide 23
  • Example:What substance has a solubility of 90 g/100 cm 3 of water at a temperature of 25C ?
  • Slide 24
  • Slide 25
  • Example: What substance has a solubility of 200 g/100 cm 3 of water at a temperature of 90C ?
  • Slide 26
  • Slide 27
  • B.Look for the temperature or solubility Locate the solubility curve needed and see for a given temperature, which solubility it lines up with and visa versa.
  • Slide 28
  • What is the solubility of potassium nitrate at 80C ?
  • Slide 29
  • At what temperature will sodium nitrate have a solubility of 95 g/100 cm 3 ?
  • Slide 30
  • At what temperature will potassium iodide have a solubility of 230 g/100 cm 3 ?
  • Slide 31
  • What is the solubility of sodium chloride at 25C in 150 cm 3 of water ? From the solubility graph we see that sodium chlorides solubility is 36 g.
  • Slide 32
  • Solubility in grams=unknown solubility in grams 100 cm 3 of waterother volume of water ___36 grams____=unknown solubility in grams 100 cm 3 of water150 cm 3 water Place this in the proportion below and solve for the unknown solubility. Solve for the unknown quantity by cross multiplying. The unknown solubility is 54 grams. You can use this proportion to solve for the other volume of water if you're given the other solubility.
  • Slide 33
  • Solids and Gases dissolved in Liquids ToTo Sol. ToTo Solids dissolved in liquids Gases dissolved in liquids As T o, solubility
  • Slide 34
  • How many additional grams of solute must be added in order to make it saturated? From the graph you can see that the solubility for potassium nitrate at 50C is 84 grams
  • Slide 35
  • If there are already 30 grams of solute in the solution, all you need to get to 84 grams is 54 more grams ( 84g-30g )
  • Slide 36
  • Solubility Table LeMay Jr, Beall, Robblee, Brower, Chemistry Connections to Our Changing World, 1996, page 517 shows the dependence of solubility on temperature 0 10 20 30 40 50 60 70 80 90 100 Solubility vs. Temperature for Solids Solubility (grams of solute/100 g H 2 O) KI KCl 20 10 30 40 50 60 70 80 90 110 120 130 140 100 NaNO 3 KNO 3 HClNH 4 Cl NH 3 NaCl KClO 3 SO 2 gases solids
  • Slide 37
  • Classify as unsaturated, saturated, or supersaturated. per 100 g H 2 O 80 g NaNO 3 @ 30 o C 60 g KCl @ 60 o C=saturated 50 g NH 3 @ 10 o C = unsaturated 70 g NH 4 Cl @ 70 o C =unsaturated =supersaturated 0 10 20 30 40 50 60 70 80 90 100 Solubility vs. Temperature for Solids Solubility (grams of solute/100 g H 2 O) KI KCl 20 10 30 40 50 60 70 80 90 110 120 130 140 100 NaNO 3 KNO 3 HClNH 4 Cl NH 3 NaCl KClO 3 SO 2 gases solids
  • Slide 38
  • So sat. pt. @ 40 o C for 500 g H 2 O = 5 x 66 g = 330 g 120 g < 330 g unsaturated saturation point @ 40 o C for 100 g H 2 O = 66 g KNO 3 Per 500 g H 2 O, 120 g KNO 3 @ 40 o C Solubility vs. Temperature for Solids Solubility (grams of solute/100 g H 2 O) KI KCl 20 10 30 40 50 60 70 80 90 110 120 130 140 100 NaNO 3 KNO 3 HClNH 4 Cl NH 3 NaCl KClO 3 SO 2 gases solids 0 10 20 30 40 50 60 70 80 90 100
  • Slide 39
  • (A) Per 100 g H 2 O, 100 g Unsaturated; all solute NaNO 3 @ 50 o C. dissolves; clear solution. (B) Cool solution (A) very Supersaturated; extra slowly to 10 o C. solute remains in solution; still clear. Describe each situation below. (C) Quench solution (A) in Saturated; extra solute an ice bath to 10 o C. (20 g) cant remain in solution, becomes visible.