SOLIDWORKS 3D Interconnect · 3D Interconnect Driving philosophy: Seamlessly use 3D content in any...
Transcript of SOLIDWORKS 3D Interconnect · 3D Interconnect Driving philosophy: Seamlessly use 3D content in any...
SOLIDWORKS 3D Interconnect A Time-saving Interoperability Tool
Sr. Territory Technical Manager
Dassault Systemes SOLIDWORKS
Jenn Doerksen
Your Logo Here
Ergonomics Design Partner
Speaker Supplier
Electronics Design Partner
LCD Supplier
Plastic Component Manufacturer
Your Logo Here
Your Logo Here
3D Interconnect Driving philosophy:
Seamlessly use 3D content in any format in SOLIDWORKS as if it was created in SOLIDWORKS.
Ground Principle: SOLIDWORKS cannot modify the native data and save it back in its native form.
Your Logo Here
3D Interconnect: Two Main Workflows
Use Content
Complete your Design Drive your Design
Migration Evolve a Design Convert your Design
Your Logo Here
1. Use Content Workflow
• Software Capability
• Use 3D supplier content directly in SOLIDWORKS designs.
• Create design references around other CAD models.
• Seamlessly update from other CAD content if the other
content is modified.
• Key Values
• Direct reference to other CAD data minimizes data
duplication and management hassles.
• Update capabilities minimizes the impact of change in
SOLIDWORKS.
• Use SOLIDWORKS capabilities on other data.
• Coexistence with Other CAD system and Data
Your Logo Here
2. Migration Workflow
• Software Capability • Use other CAD data as start part or assembly to start ECO
process.
• Break link with other CAD at document or feature level to control the level on reuse.
• Stop using dumb geometry, and instead use native format without breaking any references.
• Key Values • Allows Slow Migration based on need.
• Migrate legacy files to SOLIDWORKS on need basis.
• Preserve the work done on the legacy content through out the slow migration process.
• Allow Slow Migration from Other CAD to SOLIDWORKS
Your Logo Here
Your Logo Here
Let’s take a look
Your Logo Here
3D Interconnect
Direct Link • Part and Assemblies directly refer to the Original CAD content.
• File update is allowed.
• File to File reference created in SW, hence no SW File reference is created.
• No Edits to other CAD data is allowed in SOLIDWORKS.
Derived Link
• Other CAD representation is stored in SOLIDWORKS files.
• File to Feature reference is created in SOLIDWORKS.
• SOLIDWORKS operations on the other CAD content is allowed for modification.
• Modification is stored at SW file level. Original other CAD file is untouched.
• In Case of update, all downstream SOLIDWORKS features will be retained.
Broken Link • Reference to other CAD file is broken.
• Legacy SW behavior with No Updates applies.
• Link Status
Your Logo Here
3D Interconnect Driving philosophy:
Seamlessly use 3D content in any format in SOLIDWORKS as if it was created in SOLIDWORKS.
Ground Principle: SOLIDWORKS cannot modify the native data and save it back in its native form.