Solderless Breadboards General Purpose Prototyping …dkc3.digikey.com/PDF/CA2011/P2519.pdf · SOIC...
Transcript of Solderless Breadboards General Purpose Prototyping …dkc3.digikey.com/PDF/CA2011/P2519.pdf · SOIC...
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.1-800-344-4539 • www.digikey.ca • 218-681-6674 • Fax: 218-681-3380 (CA2011) 2519
K
SMT Adapter Boards
DescriptionDigi-KeyPart No.
Price Each Twin IndustriesPart No.1 10
PLCC 20, 28, 44, 64, 84 438-1031-ND 56.68 49.83 8100-SMT3
SOIC Medium, Wide, Plastic, (50 mil pitch) 438-1014-ND 24.51 21.55 8100-SMT4
SOIC Medium, Tiny, Metric, (25 mil/50mil pitch) 438-1017-ND 46.97 41.30 8100-SMT8
SOIC Medium, Tiny, Metric, (25 mil/50mil pitch) 438-1057-ND◆ 49.32 43.36 8100-SMT8-LF
QFP 44-100, 160, (25 mil pitch) 438-1015-ND 32.68 28.73 8100-SMT6
QFP 80 (20 mil pitch) 6” x 4” Board 438-1033-ND 44.93 39.50 8100-SMT11
QFP 100, 128, 144, 208, 240, (20 mil pitch) 438-1016-ND 46.97 41.30 8100-SMT7
TSOP 40, 48, 56, (20 mil pitch); PSOP 44 (50 mil pitch); SSOP 56 (30 mil pitch)
438-1018-ND 77.61 68.23 8100-SMT9
TSSOP (20 mil pitch) 6” x 4” Board 438-1032-ND 44.93 39.50 8100-SMT10
TSSOP (20 mil pitch) 6” x 4” Board 438-1058-ND◆ 47.18 41.48 8100-SMT10-LF
TQFP 64 (20 mil pitch) 6” x 4” Board 438-1054-ND 44.93 39.50 8100-SMT14
Surface mount components are soldered to pads on boards. Traces extend from pads to prototyping holes on standard
0.1” x 0.1” (2.54mm x 2.54mm) grid. Individual leads can be monitored or other components can be added to evaluate
performance of surface mount product. Saves time and prototyping cost.
All boards made with FR4 laminate, and featuring ground plane on back side. Pad to pad spacing (pitch) is measured in
mils (thousandths of inch).
Fig. DescriptionDigi-KeyPart No.
Price Each Twin IndustriesPart No.1 10
1830 Tie-Points 438-1045-ND 10.02 9.17 TW-E40-1020
830 Tie-Points with 70 pieces, Wire Kit 438-1046-ND 15.43 14.11 TW-E41-1020
2830 Tie-Points with 70 pieces, Wire Kit and Binding Post
438-1047-ND 22.66 20.73 TW-E41-102B
32390 Tie-Points with 140 pieces, Wire kit and Binding Post
438-1048-ND 43.00 39.32 TW-E41-1060
—
140 pieces, Wire Kit 438-1049-ND 11.20 8.96 TW-E012-000
Machine Pin Jumper Wires 5cm 438-1073-ND NEW! 8.68 7.63 TW-MP-5
Machine Pin Jumper Wires 10cm 438-1074-ND NEW! 9.12 8.02 TW-MP-10
Machine Pin Jumper Wires 20cm 438-1075-ND NEW! 9.55 8.40 TW-MP-20
Solderless BreadboardsBreadboards are commonly used for prototyping because they allow you to quickly build temporary circuits without
soldering. Twin Industries premium quality solderless breadboards have aluminum ground plates for high speed and low
noise, and a color coding Letter/ Number labeling scheme to assist in circuit layout and debugging. In addition, there are
binding posts for convenient attachment of power sources, or input and output signals.
• 70 piece kit contains: 5 of each; 5”, 4”, 3”, 2”, 1”, 0.9”, 0.8’, 0.7”, 0.6”, 0.5”, 0.4”, 0.3”, 0.2” and 0.1” wires.
• 140 piece kit contains: 10 of each; 5”, 4”, 3”, 2”, 1”, 0.9”, 0.8’, 0.7”, 0.6”, 0.5”, 0.4”, 0.3”, 0.2” and 0.1” wires.
Fig. 1
Fig. 2
Fig. 3
A B
15
1015
2025
3035
4045
5055
60
15
1015
2025
3035
4045
5055
60
C D E F G H I J
A B C D E F G H I J
- + - +
- + - +
-+
-+
A B
15
1015
2025
3035
4045
5055
60
15
1015
2025
3035
4045
5055
60
C D E F G H I J
A B C D E F G H I J
A B
15
1015
2025
3035
4045
5055
60
15
1015
2025
3035
4045
5055
60
C D E F G H I J
A B C D E F G H I J
- + - +
- + - +
6.89 (175)6.496 (165)
9.06(230)
6.89(175)
TW-E41-1060
AB
1 5 10 15 20 25 30 35 40 45 50 55 60
1 5 10 15 20 25 30 35 40 45 50 55 60
CDE
FGHIJ
ABCDE
FGHIJ
-+
-+
-+
-+
7.28 (185)6.496 (165)
3.94(100)
2.13(54)
AB
151015202530354045505560
151015202530354045505560
CD
EF
GH
IJ
AB
CD
EF
GH
IJ
-+
-+
-+
-+
6.496 (165)
2.13(54)
Dimensions in Inches (mm)
Extender CardsBus extender cards allow units under test (UUT) to be developed in functioning systems. The extenders allow access to the UUT and prevent damage to test systems from repeated removals and insertions. Models with test point allow monitoring of signal activity.
◆ RoHS Compliant◆ RoHS Compliant
◆ RoHS Compliant
General Purpose PrototypingBoardsHigh quality prototyping boards for use in hardware development, rapid prototyping, and wire wrapping projects.Features:• FR4 glass epoxy material, 0.062” thick• High temp laminate for lead free boards• Grid holes spaced on 0.1” x 0.1” (2.54mm x
2.54mm) centers• Hole size .042” (.035” plated) • PTH = Plated Thru Hole • NP = Non-Plated
Operating Temperature:Standard: 140°C; Lead Free: 170°C
Fig. DescriptionDigi-KeyPart No.
Price Each Twin IndustriesPart No.1 10
—
CompactPCI 3U (J1-2) 438-1072-ND 95.54 89.92 2000-50CompactPCI 6U x 80mm Rear I/O (J1-5) 438-1071-ND 122.53 115.33 2000-80CompactPCI 6U 438-1070-ND 188.86 177.75 2000-200CompactPCI 3U with Test Points 160mm x 3U
438-1055-ND◆ 306.35 296.14 2000-EXTM-LF
1CompactPCI 6U with Test Points 160mm x 6U
438-1056-ND◆ 434.95 409.37 2000-6U-EXTM-LF
— CompactPCI 6U x 80mm 438-1003-ND 504.97 488.14 2000-6U-80EX2 CompactPCI 6U x 80mm Rear I/O (J3-5) 438-1068-ND◆ 468.95 453.32 2000-6U-80EX-REAR-LF— CompactPCI 3U Extender Card 438-1064-ND◆ NEW! 282.78 251.37 2000-3U-80EX-LF
3
PCI, 64-Bit, 4 Layer with Test Points (3.3V or 5V)
438-1066-ND◆ 148.80 140.05 7564-UEXTM-LF
PCI, 32-Bit, 2 Layer 438-1099-ND◆ NEW! 101.15 89.92 7586-EXT-LFPCI, 32-Bit, 4 Layer with Test Points 438-1067-ND◆ NEW! 191.89 170.57 7586-5EXTM-LF
4PCI, 32-Bit, Right Angle Riser Card 438-1062-ND◆ 57.23 53.87 7586-RAEXTM-LFPCI, 32-Bit, Left Angle Riser Card 438-1061-ND◆ 57.23 53.87 7586-LAEXTM-LF
— PCI, 32-Bit Prototyping Board 438-1098-ND NEW! 88.19 78.39 7586-5100
5PCMCIA, 4 Layer, 2.13” x 6.35” (54mm x 161mm)
438-1065-ND◆ 148.57 139.83 3300-EXTM-LF
PCMCIA, 2 Layer 438-1095-ND◆ NEW! 131.29 116.71 3300-EXT-LF6 VME with Test Points for all Signals 438-1063-ND◆ 206.03 193.91 8196-6U-EXT-LF
—
PMC Card Extender (J/P 1-4) 438-1069-ND◆ 531.48 500.22 2500-EXTM-LF6U VME/VME64X Prototyping Board 8.7” x 2.4”
438-1087-ND◆ NEW! 202.19 177.75 8198-200
Extender Card ISA 438-1088-ND◆ NEW! 192.15 168.78 7098-EXT-LF
NPFig. 2
Fig. 4Fig. 3 PTHwith Grid
PTH
Fig. 1PTH
PTHwith Grid
Description – Inch (mm)Digi-KeyPart No.
Price Each Twin IndustriesPart No.1 10
Fig. 1 - 7100 Series — Unclad (No Copper) — RoHS Compliant4 x 5 (101.6 x 127) 438-1019-ND 5.31 4.67 7100-454.5 x 6.5 (114.3 x 165) 438-1037-ND 9.39 8.26 7100-45654.5 x 6.5 (114.3 x 165) .062” Holes 438-1034-ND 9.39 8.26 7100-062-45654.5 x 8.5 (114.3 x 216) .062” Holes 438-1035-ND 14.20 12.48 7100-062-45854 x 10 (101.6 x 254) 438-1036-ND 11.33 9.97 7100-41010 x 10 (254 x 254) 438-1020-ND 26.55 23.35 7100-101010 x 20 (254 x 508) 438-1021-ND 51.06 44.89 7100-1020
Fig. 2 - 8000 Series — Plated Thru Hole, Double Sided4 x 5 (101.6 x 127) 438-1022-ND 15.46 13.60 8000-454 x 5 (101.6 x 127) Gold Plating Over Copper 438-1051-ND◆ 16.24 14.28 8000-45-LF4.5 x 6.5 (114.3 x 165) 438-1040-ND 24.51 21.55 8000-45654.5 x 6.5 (114.3 x 165) 438-1060-ND◆ 25.73 22.63 8000-4565-LF6.3 x 3.9 (160 x 100) 2mm Pitch 438-1038-ND 28.29 24.87 8000-2MM-3U4 x 10 (101.6 x 254) 438-1039-ND 29.61 26.04 8000-4104 x 10 (101.6 x 254) Gold Plating Over Copper 438-1050-ND◆ 31.15 27.39 8000-410-LF10 x 10 (254 x 254) 438-1023-ND 69.44 61.05 8000-101010 x 10 (254 x 254) 438-1059-ND◆ 72.91 64.10 8000-1010-LF10 x 20 (254 x 508) 438-1024-ND 130.71 114.91 8000-1020
Fig. 3 - 8100 Series — Plated Thru Hole, GND Plane4 x 5 (101.6 x 127) 438-1025-ND 15.46 13.60 8100-454 x 5 (101.6 x 127) Gold Plating Over Copper 438-1052-ND◆ 16.24 14.28 8100-45-LF4.5 x 6.5 (114.3 x 165) 438-1042-ND 24.51 21.55 8100-45654 x 10 (101.6 x 254) 438-1041-ND 29.61 26.04 8100-41010 x 10 (254 x 254) 438-1026-ND 69.44 61.05 8100-1010
Fig. 4 - 8200 Series — Plated Thru Hole, Two GND Plane4 x 5 (101.6 x 127) 438-1028-ND 15.46 13.60 8200-454 x 5 (101.6 x 127) Gold Plating Over Copper 438-1053-ND◆ 16.24 14.28 8200-45-LF4.5 x 6.5 (114.3 x 165) 438-1044-ND 24.51 21.55 8200-45654 x 10 (101.6 x 254) 438-1043-ND 29.61 26.04 8200-41010 x 10 (254 x 254) 438-1029-ND 69.44 61.05 8200-1010
NEW! General Purpose Prototyping Boards NEW!4 x 3.5 (101.6 x 88.9) .028” Holes 438-1096-ND 36.31 32.29 7036-508 x 8 (203.2 x 203.2) .035” Holes 438-1097-ND 75.22 66.87 7050-100
Fig. 5
Fig. 3
Fig. 4
Fig. 2Fig. 1
Fig. 6
SOICPLCC
QFP44-100 QFP100,128
ç èPrev Page
Prev Page Next Pageè
Next Page
ç