só linha de amarr

8/13/2019 s linha de amarr

1/72

TRI-PLOT triangular diagram plotting spreadsheet Instructions - page 1

Revision history

Full documentation (PDF - requires Adobe Acrobat reader) Get Adobe Acrobat Reader

To generate SIZE triangular diagrams

Introduction

Brief instructions

Technical notes

Triangular diagram plotting spreadsheet (TRI-PLOT)

by David Graham (Loughborough University)

and Nicholas Midgley (Liverpool John Moores University)

IntroductionBrief instructions

To generate SHAPE (Sneed and Folk) triangular diagrams

Click here to generate a particleSHAPE (Sneed and Folk)

triangular diagram

This spreadsheet plots triangular (ternary) diagrams for the representation of particle shape following the methodrecommended by Benn and Ballantyne (1993) and first proposed by Sneed and Folk (1958). Ordinary ternarydiagram plotting software is unable to plot these diagrams as the parameters on the three axes do not sum to 1.The spreadsheet also plots standard ternary diagrams for the representation of particle size. The spreadsheet isdescribed in Graham and Midgley (2000).

This file only contains brief instructions on the operation of TRI-PLOT. Users are referred to the fulldocumentation for full details.

The workbook contains three sheets:-This sheet contains instructions and information about TRI-PLOT.-The second sheet is for the generation of particle SHAPE (Sneed and Folk) triangular diagrams.-The third sheet is for the generation of standard triangular diagrams to represent particle SIZE. It may be usedfor any tri-variate data in which the three variables represent the proportion of a whole.

To generate SHAPE (Sneed and Folk) triangular diagramsThis part of the spreadsheet generates ternary diagrams for the representation of particle shape asrecommended by Benn and Ballantyne (1993) and first proposed by Sneed and Folk (1958). The inputs requiredare the a-, b- and c-axis lengths of the particles. The "SHAPE" sheet can be accessed using the button above orthe tab at the bottom of the screen. The sheet contains five areas: the data entry area, the plotting parametersarea, the isoline values area, the triangular diagram itself, and the calculations area.

Data entry areaType the a-, b- and c-axis dimensions of each clast into the table. The units of measurement are not important,as long as they are consistent. Error messages are displayed in blue. The triangular diagram will update as dataare entered. The data entry area is set up initially to accept data for 250 clasts. Samples of less than 250 clastsdo not require the spreadsheet to be altered. Samples of more than 250 clasts require that the spreadsheet isaltered by copying the formulae in columns P - T the required number of times.

Plott ing parameters areaThis area defines aspects of how the triangular diagram will appear on the screen and when printed. Full details

of the options are in the documentation.

Isoline values areaThis area provides the opportunity to define which isolines of the oblate-prolate index and the maximumprojection sphericity index are plotted on the triangular diagram. Whether the isolines are plotted depends on theappropriate setting in the plotting parameters area.

Sneed & Folk classes areaThis area shows the proportion of particles that fall into each of the Sneed & Folk (1958) descriptive shapeclasses. Data are presented as raw counts and percentages.

Calculat ions area

This is the area in which Excel calculates the locations at which to plot the user-entered data and other elementsof the triangular diagram. It should not be necessary to modify this area, except if the number of grains to be

Click here to generate a particleSIZE (conventional)triangular diagram
http://localhost/var/www/apps/conversion/Beatriz/AppData/Local/Temp/tri-plot_documentation_v1-4.pdfhttp://www.adobe.com/products/acrobat/readstep2.htmlhttp://www.adobe.com/products/acrobat/readstep2.htmlhttp://localhost/var/www/apps/conversion/Beatriz/AppData/Local/Temp/tri-plot_documentation_v1-4.pdf


2/72

TRI-PLOT triangular diagram plotting spreadsheet Instructions - page

Technical notes

Revision history

p o e excee s n w c case e ormu ae n co umns - s ou e cop e e requ re num er otimes).

Modif icat ions to th e tr iangular diagramThe triangular diagram itself may be modified to change line thickness, symbols used etc. Each aspect of thediagram is saved as a different data series and may be altered in the standard way for Excel charts. Additionaldata series may be added in the standard way to allow multiple data sets to be plotted on a single diagram. Referto the Excel manual or help for further details of how to modify charts and to the TRI-PLOT documentation for

details of the data series that comprise the chart.

To generate SIZE triangular diagrams

This part of the spreadsheet generates standard triangular diagrams for the representation of particle size. The"SIZE" sheet can be accessed using the button above or the tab at the bottom of the screen.

The procedure for generating a SIZE ternary diagram is almost identical to that for shape. The inputs requiredare the proportion of sediment in each of three size classes (e.g. gravel, sand, mud). These must be entered as apercentage and total 100. An error is given if the data do not sum to 100. The only other significant difference isthat the plotting parameters are more limited.

The spreadsheet was prepared using Excel 97 and 2000. It has been tested with Excel 2000 and should workwith all subsequent versions, but does not work with earlier versions.

Technical queries and problems with this spreadsheet should be addressed to:David Graham, Department of Geography, Loughborough University, Loughborough, Leicestershire LE11 3TU.E-mail [email protected].

Tri-plot is made available free of charge subject to the condition that the original source (Graham and Midgley2000) is referenced in all publications which utilise it. Tri-plot, and all associated documentation, is copyright 2003, 2006 David Graham and Nicholas Midgley. Users are free to distribute and modify the software providedthat the original source and copyright are acknowledged in any modified version and that no attempt is made topass off the derivative work as being the unmodified work of David Graham and Nicholas Midgley.

The developers of Tri-plot make no warranty regarding (1) the suitability of Tri-plot for any particular application,

or (2) the absence of errors in the software or documentation. To the extent permitted by law, no liability will beaccepted for any losses whatsoever resulting directly or indirectly from the use of Tri-plot or the associateddocumentation. Users should satisfy themselves as to the suitability of Tri-plot for their intended application.

v1.2 Additional option added to SHAPE to enable the boundaries of Sneed & Folk's (1958) descriptive shapeclasses to be plotted.v1.3 Additional options added to SHAPE to plot Dobkins & Folks (1970) oblate-prolate index isolines andSneed & Folks (1958) maximum projection sphericity isolines. Error in tick angles along bottom axis corrected.Default maximum number of grains increased to 250. Calculations and input/output sheets combined.Instructions sheet updated.v1.4 A table showing the proportion of grains falling into each of the Sneed & Folk descriptive classes added.

Minor corrections to documentation.


3/72

Data entry area Plotting parameters area

Clast Printer correction: 1.15no. a-axis b-axis c-axis Tick interval (0 - 0.5): 0.1

1 87.01 0 12.99 c-axis > b-axis Tick length (0 - 0.2): 0.022 72.7 13.14 14.16 c-axis > b-axis Plot C40line? (Y or N): n3 69.94 13.82 16.24 c-axis > b-axis Left & right axis lines? (Y or N): n4 67.17 14.4 18.43 c-axis > b-axis Bottom axis lines? (Y or N): n5 65.65 14.63 19.72 c-axis > b-axis Bottom axis ticks? (Y or N): y6 64.65 14.68 20.67 c-axis > b-axis Sneed & Folk classes? (Y or N): y7 63.37 14.92 21.71 c-axis > b-axis Oblate-prolate isolines? (Y or N): n8 62.5 14.98 22.52 c-axis > b-axis Max proj sphericity isolines? (Y or N): n9 61.53 15 23.47 c-axis > b-axis

10 60.55 15.27 24.18 c-axis > b-axis11 59.63 15.29 25.07 c-axis > b-axis12 58.9 15.48 25.62 c-axis > b-axis

13 58.6 15.52 25.87 c-axis > b-axis14 57.23 15.64 27.13 c-axis > b-axis15 55.51 15.75 28.74 c-axis > b-axis16 53.87 15.97 30.17 c-axis > b-axis17 47.16 14.57 38.27 c-axis > b-axis18 17.49 0 82.51 c-axis > b-axis19 22.27 10.3 67.43 c-axis > b-axis

20 27.43 11.41 61.16 c-axis > b-axis21 30.16 13.44 56.4 c-axis > b-axis22 33.29 13.72 52.98 c-axis > b-axis23 36.5 14.77 48.73 c-axis > b-axis24 42.04 15.43 42.54 c-axis > b-axis25

2627

28

29

30

31

32

33

34

35

36

37

38

39

4041

42

43

44

45

46

47

48

Clast axes

Error messages

SHAPE - for producing Sneed & Folk diagrams

c : a

(a - b) / (a - c)


4/72

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

6970

71

72

73

74

75

76

77

78

79

80

81

82

8384

85

86

87

88

89

90

91

92

93

94

95

9697

98

99

100

101

102

103

104


5/72

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125126

127

128

129

130

131

132

133

134

135

136

137

138

139140

141

142

143

144

145

146

147

148

149

150

151

152153

154

155

156

157

158

159

160


6/72

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181182

183

184

185

186

187

188

189

190

191

192

193

194

195196

197

198

199

200

201

202

203

204

205

206

207

208209

210

211

212

213

214

215

216


7/72

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237238

239

240

241

242

243

244

245

246

247

248

249

250


8/72

Isoline valuesError messages Error messages

Oblate-prolate 0.0isoline values: 2.5

5.0Enter up to 10 values >= 0 7.5

10.0Negative values are 15.0

calculated automatically 20.030.0

Max projection 0.2sphericity isolines: 0.3

0.4Enter up to 10 values (0 - 1) 0.5

0.60.70.80.9

Sneed & Folk classesCount Percent

Compact 7 31.82Compact-Platy 0 0.00

Compact-Bladed 0 0.00Compact-Elongate 2 9.09

Platy 0 0.00Bladed 0 0.00Elongate 10 45.45

Very-Platy 0 0.00Very-Bladed 0 0.00

Very-Elongate 3 13.64

Click here to return to theINSTRUCTIONS

b : a


9/72


10/72


11/72


12/72


13/72

Calculations area: do not cha

Clast axis ratios

c/a b/a

0.00 0.000.19 0.180.23 0.200.27 0.210.30 0.220.32 0.230.34 0.240.36 0.240.38 0.240.40 0.250.42 0.260.44 0.26

0.44 0.260.47 0.270.52 0.280.56 0.300.81 0.310.00 0.003.03 0.46

2.23 0.421.87 0.451.59 0.411.33 0.401.01 0.370.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00


14/72

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00


15/72


16/72

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00


17/72

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

0.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.000.00 0.00

To expand the number


18/72

nge values (workings in red, output in blue)Range of c/a Range of (a-b)/(a-c)

Graph co-ordinates (a-b) >0.3, >0.5, >0.333,

x y /(a-c)


19/72

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0


20/72

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0


21/72

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0


22/72

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0-1.00 -1.00 0.00 0 0 0 0 1 0 0 0 0 0

f clasts, copy the contents of columns U-Y into the rows below.


23/72

Sneed and Folk shape class

Plotting parameter summary Trian

CE P B E VP VB VE Printer correction: 1.15 x0 0 0 0 0 0 0 Tick interval: 0.1 0.500 0 0 0 0 0 1 Tick length: 0.02 0.000 0 0 0 0 0 1 Plot C40 line?: 0 1.000 0 0 0 0 0 1 Plot lines?: 0 0.500 0 0 1 0 0 0 Bot'm axis lines?: 00 0 0 1 0 0 0 Bot'm axis ticks?: 10 0 0 1 0 0 0 Sneed and Folk lines?: 10 0 0 1 0 0 0 OPI lines?: 00 0 0 1 0 0 0 MPS lines?: 00 0 0 1 0 0 00 0 0 1 0 0 0 Left0 0 0 1 0 0 0 Tick

0 0 0 1 0 0 0 position x0 0 0 1 0 0 0 0 0.001 0 0 0 0 0 0 0 -0.021 0 0 0 0 0 0 00 0 0 0 0 0 0 0.1 0.050 0 0 0 0 0 0 0.1 0.030 0 0 0 0 0 0 0.1

0 0 0 0 0 0 0 0.2 0.100 0 0 0 0 0 0 0.2 0.080 0 0 0 0 0 0 0.20 0 0 0 0 0 0 0.3 0.150 0 0 0 0 0 0 0.3 0.130 0 0 0 0 0 0 0.3

0 0 0 0 0 0 0 0.4 0.200 0 0 0 0 0 0 0.4 0.180 0 0 0 0 0 0 0.40 0 0 0 0 0 0 0.5 0.250 0 0 0 0 0 0 0.5 0.230 0 0 0 0 0 0 0.50 0 0 0 0 0 0 0.6 0.300 0 0 0 0 0 0 0.6 0.280 0 0 0 0 0 0 0.60 0 0 0 0 0 0 0.7 0.350 0 0 0 0 0 0 0.7 0.330 0 0 0 0 0 0 0.70 0 0 0 0 0 0 0.8 0.400 0 0 0 0 0 0 0.8 0.38

0 0 0 0 0 0 0 0.80 0 0 0 0 0 0 0.9 0.450 0 0 0 0 0 0 0.9 0.430 0 0 0 0 0 0 0.90 0 0 0 0 0 0 1 0.500 0 0 0 0 0 0 1 0.480 0 0 0 0 0 0 10 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.50


24/72

0 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 0

0 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.50

0 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 0 0.500 0 0 0 0 0 0 0.500 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0


25/72

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0


26/72


27/72

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0

0 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 00 0 0 0 0 0 0


28/72

le outline C40 line

y x y

1.00 0.00 0.000.00 0.00 0.000.001.00

(c/a ratio) Right (b/a ratio)

axis ticks axis ticks Left axis lines Right axis lines Bottom axis lines

y x y x y x y x y0.00 1.00 0.00 0.00 0.00 0.00 0.000.00 1.01 0.02 0.00 0.00

0.10 0.95 0.10 0.00 0.00 0.00 0.00 0.50 1.000.10 0.96 0.12 0.00 0.00 0.00 0.00 0.50 1.00

0.20 0.90 0.20 0.00 0.00 0.00 0.00 0.50 1.000.20 0.91 0.22 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.000.30 0.85 0.30 0.00 0.00 0.00 0.000.30 0.86 0.32 0.00 0.00 0.00 0.00

0.40 0.80 0.40 0.00 0.00 0.00 0.00 0.50 1.000.40 0.81 0.42 0.00 0.00 0.00 0.00 0.50 1.000.50 1.00

0.50 0.75 0.50 0.00 0.00 0.00 0.000.50 0.76 0.52 0.00 0.00 0.00 0.00

0.60 0.70 0.60 0.00 0.00 0.00 0.00 0.50 1.000.60 0.71 0.62 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.000.70 0.65 0.70 0.00 0.00 0.00 0.000.70 0.66 0.72 0.00 0.00 0.00 0.00

0.80 0.60 0.80 0.00 0.00 0.00 0.00 0.50 1.000.80 0.61 0.82 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.000.90 0.55 0.90 0.00 0.00 0.00 0.000.90 0.56 0.92 0.00 0.00 0.00 0.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.001.00 0.51 1.02 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.001.00 0.50 1.00 0.00 0.00 0.00 0.00


29/72

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.001.00 0.50 1.00 0.00 0.00 0.00 0.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.001.00 0.50 1.00 0.00 0.00 0.00 0.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.001.00 0.50 1.00 0.00 0.00 0.00 0.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.000.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.001.00 0.50 1.00 0.00 0.00 0.00 0.00

1.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.001.00 0.50 1.00 0.00 0.00 0.00 0.00 0.50 1.00

0.50 1.00


30/72


31/72


32/72


33/72

Bottom axis ticks Sneed and Folk classes

x-calc y-calc x y x y OPI (a-b)/(a-c)0.00 0.00 0.00 0.00 top line 0.35 0.70 0.50

-0.01 -0.02 -0.01 -0.02 0.65 0.70 0.600.70

0.10 0.00 0.10 0.00 middle line 0.25 0.50 0.800.09 -0.02 0.09 -0.02 0.75 0.50 0.90

1.00

0.20 0.00 0.20 0.00 bottom line 0.15 0.300.19 -0.02 0.19 -0.02 0.85 0.30 0.50

0.600.30 0.00 0.30 0.00 left line 0.33 0.00 0.700.30 -0.02 0.30 -0.02 0.45 0.70 0.80

0.90

0.40 0.00 0.40 0.00 right line 0.67 0.00 1.000.40 -0.02 0.40 -0.02 0.55 0.700.50

0.50 0.00 0.50 0.00 0.600.50 -0.02 0.50 -0.02 0.70

0.800.60 0.00 0.60 0.00 0.900.60 -0.02 0.60 -0.02 1.00

0.70 0.00 0.70 0.00 0.500.70 -0.02 0.70 -0.02 0.60

0.700.80 0.00 0.80 0.00 0.800.81 -0.02 0.81 -0.02 0.90

1.000.90 0.00 0.90 0.000.91 -0.02 0.91 -0.02 0.50

0.601.00 0.00 1.00 0.00 0.701.01 -0.02 1.01 -0.02 0.80

0.900.00 0.00 0.00 0.00 1.000.00 0.00 0.00 0.00


34/72

0.500.00 0.00 0.00 0.00 0.600.00 0.00 0.00 0.00 0.70

0.800.00 0.00 0.00 0.00 0.900.00 0.00 0.00 0.00 1.00

0.00 0.00 0.00 0.00 0.500.00 0.00 0.00 0.00 0.60

0.700.00 0.00 0.00 0.00 0.800.00 0.00 0.00 0.00 0.90

1.000.00 0.00 0.00 0.000.00 0.00 0.00 0.00 0.50

0.600.00 0.00 0.00 0.00 0.700.00 0.00 0.00 0.00 0.80

0.900.00 0.00 0.00 0.00 1.00

0.00 0.00 0.00 0.00 0.500.00 0.00 0.00 0.00 0.600.00 0.00 0.00 0.00 0.70

0.800.00 0.00 0.00 0.00 0.900.00 0.00 0.00 0.00 1.00

0.500.600.700.800.901.00


35/72


36/72


37/72


38/72

Oblate-prolate index isolines Ma

c:a x-intermed y-intermed x-right x-left y MPS c/b c/a0.00 0.00 0.00 1.00 0.00 lhs #VALUE!0.00 0.00 0.00 1.00 0.00 0.10 #VALUE!0.00 0.00 0.00 1.00 0.00 0.20 #VALUE!0.00 0.00 0.00 1.00 0.00 0.30 #VALUE!0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!0.00 0.00 0.00 1.00 0.00 0.50 #VALUE!

0.60 #VALUE!0.00 0.00 0.00 1.00 0.00 0.70 #VALUE!0.00 0.00 0.00 1.00 0.00 0.80 #VALUE!0.00 0.00 0.00 1.00 0.00 0.90 #VALUE!0.00 0.00 0.00 1.00 0.00 1.00 #VALUE!0.00 0.00 0.00 1.00 0.00

0.00 0.00 0.00 1.00 0.00 lhs #VALUE!0.10 #VALUE!0.00 0.00 0.00 1.00 0.00 0.20 #VALUE!0.00 0.00 0.00 1.00 0.00 0.30 #VALUE!0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!0.00 0.00 0.00 1.00 0.00 0.50 #VALUE!0.00 0.00 0.00 1.00 0.00 0.60 #VALUE!0.00 0.00 0.00 1.00 0.00 0.70 #VALUE!

0.80 #VALUE!0.00 0.00 0.00 1.00 0.00 0.90 #VALUE!0.00 0.00 0.00 1.00 0.00 1.00 #VALUE!0.00 0.00 0.00 1.00 0.000.00 0.00 0.00 1.00 0.00 lhs #VALUE!0.00 0.00 0.00 1.00 0.00 0.10 #VALUE!

0.00 0.00 0.00 1.00 0.00 0.20 #VALUE!0.30 #VALUE!

0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!0.00 0.00 0.00 1.00 0.00 0.50 #VALUE!0.00 0.00 0.00 1.00 0.00 0.60 #VALUE!0.00 0.00 0.00 1.00 0.00 0.70 #VALUE!0.00 0.00 0.00 1.00 0.00 0.80 #VALUE!0.00 0.00 0.00 1.00 0.00 0.90 #VALUE!

1.00 #VALUE!


39/72

0.00 0.00 0.00 1.00 0.000.00 0.00 0.00 1.00 0.00 lhs #VALUE!0.00 0.00 0.00 1.00 0.00 0.10 #VALUE!0.00 0.00 0.00 1.00 0.00 0.20 #VALUE!0.00 0.00 0.00 1.00 0.00 0.30 #VALUE!0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!

0.50 #VALUE!

0.00 0.00 0.00 1.00 0.00 0.60 #VALUE!0.00 0.00 0.00 1.00 0.00 0.70 #VALUE!0.00 0.00 0.00 1.00 0.00 0.80 #VALUE!0.00 0.00 0.00 1.00 0.00 0.90 #VALUE!0.00 0.00 0.00 1.00 0.00 1.00 #VALUE!0.00 0.00 0.00 1.00 0.00

lhs #VALUE!0.00 0.00 0.00 1.00 0.00 0.10 #VALUE!0.00 0.00 0.00 1.00 0.00 0.20 #VALUE!0.00 0.00 0.00 1.00 0.00 0.30 #VALUE!0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!0.00 0.00 0.00 1.00 0.00 0.50 #VALUE!0.00 0.00 0.00 1.00 0.00 0.60 #VALUE!

0.70 #VALUE!0.00 0.00 0.00 1.00 0.00 0.80 #VALUE!0.00 0.00 0.00 1.00 0.00 0.90 #VALUE!0.00 0.00 0.00 1.00 0.00 1.00 #VALUE!0.00 0.00 0.00 1.00 0.000.00 0.00 0.00 1.00 0.00 lhs #VALUE!0.00 0.00 0.00 1.00 0.00 0.10 #VALUE!

0.20 #VALUE!0.00 0.00 0.00 1.00 0.00 0.30 #VALUE!0.00 0.00 0.00 1.00 0.00 0.40 #VALUE!0.00 0.00 0.00 1.00 0.00 0.50 #VALUE!0.00 0.00 0.00 1.00 0.00 0.60 #VALUE!0.00 0.00 0.00 1.00 0.00 0.70 #VALUE!0.00 0.00 0.00 1.00 0.00 0.80 #VALUE!

0.90 #VALUE!1.00 #VALUE!

lhs #VALUE!0.10 #VALUE!0.20 #VALUE!0.30 #VALUE!0.40 #VALUE!0.50 #VALUE!0.60 #VALUE!0.70 #VALUE!0.80 #VALUE!0.90 #VALUE!

1.00 #VALUE!

lhs #VALUE!0.10 #VALUE!0.20 #VALUE!0.30 #VALUE!0.40 #VALUE!0.50 #VALUE!0.60 #VALUE!


40/72

0.70 #VALUE!0.80 #VALUE!0.90 #VALUE!1.00 #VALUE!

lhs #VALUE!0.10 #VALUE!

0.20 #VALUE!0.30 #VALUE!0.40 #VALUE!0.50 #VALUE!0.60 #VALUE!0.70 #VALUE!0.80 #VALUE!0.90 #VALUE!1.00 #VALUE!

lhs #VALUE!0.10 #VALUE!0.20 #VALUE!

0.30 #VALUE!0.40 #VALUE!0.50 #VALUE!0.60 #VALUE!0.70 #VALUE!0.80 #VALUE!0.90 #VALUE!1.00 #VALUE!


41/72


42/72


43/72

projection sphericity isolines

x-intermed x y#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######


44/72

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######


#VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######


45/72

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### #######


#VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######

#VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### ########VALUE! ####### #######


46/72


47/72


48/72

Data entry area Plotting parameters are

Sample Printer correction: 1.1no. Class 1 lass 2Class 3 Tick interval (0 - 0.5): 0.1

1 2.474 18.55 78.98 Tick length (0 - 0.2): 0.032 6.664 20.81 72.52 Plot lines? (Y or N): n3 9.21 22.4 68.394 13.51 29.69 56.85 14.89 35.35 49.766 15.97 41.83 41.96 must sum to 1007 1.717 96.66 1.6248 4.839 90.58 4.5769 6.905 86.57 6.529

10 9.186 82.13 8.687

11 11.22 78.71 10.0812 13.36 74.54 12.0913

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

3637

38

39

40

41

42

43

44

SIZE - for producing conventional triangular d

Proportion in class (%)Error messages

Diluente

Soluto - But

Diluente

Soluto - But


49/72

45

46

47

48

49

50

5152

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

7677

78

79

80

81

82

83

84

85

86

87

8889

90

91

92

93

94

95

96


50/72

97

98

99

100

101

102

103104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128129

130

131

132

133

134

135

136

137

138

139

140141

142

143

144

145

146

147

148


51/72

149

150

151

152

153

154

155156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180181

182

183

184

185

186

187

188

189

190

191

192193

194

195

196

197

198

199

200


52/72

201

202

203

204

205

206

207208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232233

234

235

236

237

238

239

240

241

242

243

244245

246

247

248

249

250


53/72

CalculatiError messages

iagrams Click here to return to theINSTRUCTIONS

- Butanol

Solvente cido- Actico

nol

- Butanol

Solvente cido- Actico

nol


54/72


55/72


56/72


57/72


58/72

ons area: do not change values (workings in red, output in blue)

Graph co-ordinates Plotting parameter summary Triangle outlinex y Printer correction: 1.1 x y

0.197822 0.023564 Tick interval: 0.1 0.5 0.95260.241432 0.063485 Tick length: 0.03 0 00.270095 0.087736 Plot lines?: 0 1 00.364455 0.128687 0.5 0.95260.427911 0.1418410.498131 0.1521360.975177 0.0163580.930043 0.0460980.900186 0.0657730.867203 0.087507

0.843171 0.1068390.812244 0.127314 Tick Left axis ticks Right-1 -1 position x y x-1 -1 0 0.00 0.00 1.00-1 -1 0 -0.03 0.00 1.02-1 -1 0 0.00 0.00 1.00-1 -1 0.1 0.05 0.10 0.95-1 -1 0.1 0.02 0.10 0.97-1 -1 0.1 0.05 0.10 0.95-1 -1 0.2 0.10 0.19 0.90-1 -1 0.2 0.07 0.19 0.92-1 -1 0.2 0.10 0.19 0.90-1 -1 0.3 0.15 0.29 0.85-1 -1 0.3 0.12 0.29 0.87-1 -1 0.3 0.15 0.29 0.85-1 -1 0.4 0.20 0.38 0.80-1 -1 0.4 0.17 0.38 0.82-1 -1 0.4 0.20 0.38 0.80-1 -1 0.5 0.25 0.48 0.75-1 -1 0.5 0.22 0.48 0.77-1 -1 0.5 0.25 0.48 0.75-1 -1 0.6 0.30 0.57 0.70-1 -1 0.6 0.27 0.57 0.72-1 -1 0.6 0.30 0.57 0.70-1 -1 0.7 0.35 0.67 0.65

-1 -1 0.7 0.32 0.67 0.67-1 -1 0.7 0.35 0.67 0.65-1 -1 0.8 0.40 0.76 0.60-1 -1 0.8 0.37 0.76 0.62-1 -1 0.8 0.40 0.76 0.60-1 -1 0.9 0.45 0.86 0.55-1 -1 0.9 0.42 0.86 0.57-1 -1 0.9 0.45 0.86 0.55-1 -1 1 0.50 0.95 0.50


59/72

-1 -1 1 0.47 0.95 0.52-1 -1 1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50

-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50-1 -1 0.50 0.95 0.50

-1 -1 0.50 0.95 0.50-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1


60/72

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1


61/72


62/72

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1-1 -1

To expand the number of clasts, copy the contents of columns A-J into the rows below.


63/72

axis ticks Left axis lines Right axis lines Bottom axis lines

y x y x y x y x-calc

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.000.03 0.00 0.00 0.020.00 0.000.10 0.00 0.00 0.00 0.00 0.00 0.00 0.100.12 0.00 0.00 0.00 0.00 0.00 0.00 0.120.10 0.100.19 0.00 0.00 0.00 0.00 0.00 0.00 0.200.22 0.00 0.00 0.00 0.00 0.00 0.00 0.220.19 0.200.29 0.00 0.00 0.00 0.00 0.00 0.00 0.300.31 0.00 0.00 0.00 0.00 0.00 0.00 0.320.29 0.300.38 0.00 0.00 0.00 0.00 0.00 0.00 0.400.41 0.00 0.00 0.00 0.00 0.00 0.00 0.420.38 0.400.48 0.00 0.00 0.00 0.00 0.00 0.00 0.500.50 0.00 0.00 0.00 0.00 0.00 0.00 0.520.48 0.500.57 0.00 0.00 0.00 0.00 0.00 0.00 0.600.60 0.00 0.00 0.00 0.00 0.00 0.00 0.620.57 0.600.67 0.00 0.00 0.00 0.00 0.00 0.00 0.70

0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.720.67 0.700.76 0.00 0.00 0.00 0.00 0.00 0.00 0.800.79 0.00 0.00 0.00 0.00 0.00 0.00 0.820.76 0.800.86 0.00 0.00 0.00 0.00 0.00 0.00 0.900.89 0.00 0.00 0.00 0.00 0.00 0.00 0.920.86 0.900.95 0.00 0.00 0.00 0.00 0.00 0.00 1.00


64/72

0.98 0.00 0.00 0.00 0.00 0.00 0.00 1.020.95 1.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.000.95 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.95 0.00


65/72


66/72


67/72


68/72

Bottom axis ticks

y-calc x y

0.00 0.00 0.00-0.03 0.02 -0.030.00 0.00 0.000.00 0.10 0.00

-0.03 0.12 -0.030.00 0.10 0.000.00 0.20 0.00

-0.03 0.22 -0.030.00 0.20 0.000.00 0.30 0.00

-0.03 0.32 -0.030.00 0.30 0.000.00 0.40 0.00

-0.03 0.42 -0.030.00 0.40 0.000.00 0.50 0.00

-0.03 0.52 -0.030.00 0.50 0.000.00 0.60 0.00

-0.03 0.62 -0.030.00 0.60 0.000.00 0.70 0.00

-0.03 0.72 -0.030.00 0.70 0.000.00 0.80 0.00

-0.03 0.82 -0.030.00 0.80 0.000.00 0.90 0.00

-0.03 0.92 -0.030.00 0.90 0.000.00 1.00 0.00


69/72

-0.03 1.02 -0.030.00 1.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.00

0.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.000.00 0.00 0.00

0.00 0.00 0.00


70/72


71/72


72/72

só linha de amarr

Documents

Transcript of só linha de amarr