smart door knocker

10
Instrumentatio n: Smart Door Knocker Authorized by: Berlin Richad Simanjuntak Dinda Eka Pratiwi Rifqi Nugraha 2A-Refrigeration and Air Conditioning Polytechnic State of Bandung

Transcript of smart door knocker

Page 1: smart door knocker

Instrumentation:Smart Door KnockerAuthorized by:

Berlin Richad SimanjuntakDinda Eka PratiwiRifqi Nugraha

2A-Refrigeration and Air Conditioning

Polytechnic State of Bandung

Page 2: smart door knocker

Source:http://www.instructables.com/id/Secret-Knock-Detecting-Door-Lock/

with title:Secret Knock Detecting Door Lock

Page 3: smart door knocker

The Equipments 1. Arduino UNO R3 2. Servo 3. LED 4. Resistors 5. Buzzer 6. Piezoelectric 7. Push Button 8. Cable for jumper 9. Protoboard 10. PCB

Page 4: smart door knocker

Original Wiring

Page 5: smart door knocker

Wiring with Modification

Page 6: smart door knocker

Process

Piezoelectric receive a knock

signal

The Signal received by

microcontroller

The microcontroller processed the

actuator

Page 7: smart door knocker

Software and Program

Page 8: smart door knocker

If we want to control the arduino, we must input the program by using software Arduino IDE. First we should adapt the COM of the Arduino with our software. Then, we should choose the same board between the Arduino and the software (example: Board Arduino Genuino Uno, COM 11).

Page 9: smart door knocker

The trouble when making “Smart Door Knocker”

1. To adjust the signal input into the piezoelectric in order to compare with frequency of a knock.

2. The function of push button sometimes didn’t work.

Page 10: smart door knocker

For more info, visit: