Small Push or Pull Work Solenoid - TLX Technologies · PDF fileSmall Push or Pull Work...
1
Small Push or Pull Work Solenoid +1.262.970.8660 | [email protected] | www.tlxtech.com The small work solenoid developed by TLX Technologies is a heavy duty industrial solenoid suitable for a variety of applications. This small work solenoid is suited for applications requiring high forces and long strokes, is available in continuous, intermittent or pulse duty and can be designed as either a push or pull solenoid. With typical strokes up to 1 inch and forces up to 10 pounds, this base model allows for a quick turn customization to meet your application requirements. Quick turn modifications include various coil voltages and insulation classes, mounting and plunger variations, spring returns and more. 1 .388 .450 .11 1.18 1.4 4 X .156 1 1.25 2.125 1.250 6-32 THREAD .113 .8 4 X .156 .11 1.18 1.4 Features & Benefits • Long strokes and high forces • 100/50/10% duty-cycles • Peak & hold capability • Push and pull models available • Various voltages and power levels • Class F temperature rating • Zinc plated components • Mounting variations • Quick turn customization PA0408 Typical Specifications (base model is not limited to the data listed below) Model Pole Max. Stroke in Inches Power in Watts Duty Cycle Force in Pounds at 100% Voltage Stroke in Inches Hold 0.25 0.5 0.75 1 1.5 2 PA0408 No Pole 1 17 13 34 167 Continuous Continuous Intermittent/50% Pulse/10% Cold Hot Cold Cold 23 22 25 31 0.8 0.4 1.2 3.4 0.7 0.4 1.1 3.3 0.5 0.3 0.9 3.2 0.4 0.2 0.7 2.6 — — — — — — — — Conical Pole 1 17 13 34 167 Continuous Continuous Intermittent/50% Pulse/10% Cold Hot Cold Cold 6 5 6 6 1 0.6 1.6 4.1 0.6 0.4 1.1 3.4 0.5 0.3 0.8 2.8 0.3 0.2 0.5 1.9 — — — — — — — — Note: Drawing shows pull model. For the push model, a stainless-steel push rod extends through the bottom mounting plate.
Transcript of Small Push or Pull Work Solenoid - TLX Technologies · PDF fileSmall Push or Pull Work...
Small Push or Pull Work Solenoid
+1.262.970.8660 | [email protected] | www.tlxtech.com
The small work solenoid developed by TLX Technologies is a heavy duty industrial solenoid suitable for a variety of applications. This small work solenoid is suited for applications requiring high forces and long strokes, is available in continuous, intermittent or pulse duty and can be designed as either a push or pull solenoid.
With typical strokes up to 1 inch and forces up to 10 pounds, this base model allows for a quick turn customization to meet your application requirements. Quick turn modifications include various coil voltages and insulation classes, mounting and plunger variations, spring returns and more.
1
.388
.450
.11 1.18 1.4
4 X .156
1
1.25
2.125
1.250
6-32 THREAD
.113
.8
4 X .156
.11 1.18 1.4
Features & Benefits• Longstrokesandhighforces• 100/50/10%duty-cycles• Peak&holdcapability
• Pushandpullmodelsavailable• Variousvoltagesandpowerlevels• ClassFtemperaturerating
• Zincplatedcomponents• Mountingvariations• Quickturncustomization
PA0408
Typical Specifications (base model is not limited to the data listed below)
Model PoleMax.
StrokeinInches
PowerinWatts
DutyCycleForceinPoundsat100%Voltage
StrokeinInches
Hold 0.25 0.5 0.75 1 1.5 2
PA0408 No Pole 1
171334
167
ContinuousContinuous
Intermittent/50%Pulse/10%
ColdHotColdCold
23222531
0.80.41.23.4
0.70.41.13.3
0.50.30.93.2
0.40.20.72.6
————
————
Conical Pole
1
171334167
ContinuousContinuous
Intermittent/50%Pulse/10%
ColdHotColdCold
6566
10.61.64.1
0.60.41.13.4
0.50.30.82.8
0.30.20.51.9
————
————
Note: Drawing shows pull model. For the push model, a stainless-steel push rod extends through the bottom mounting plate.
