HDT Steering Wheel identification.

VC Momo steering Wheel No model number, just date stamp. Called a Sigma. Has build number of car engraved on it. This wheel was also available from Momo without a horn pad.

VH ADP Same as VC sigma, no markings apart from date stamp on underside.

VH Grp3 380mm in diameter Model Typ C36 KBA 70024 Known as Cavillino, White stitching Re released by Momo as Cavillino 2 Sticker still available as repo

VH SS Model Typ 38? KBA 70023? Known as Master, White stitching

Sloper

VH SS Model Typ 38? KBA 70023? Known as Master, supposedly for the high output models???

VK Grp3, LE, SS Flyer, Calais, Director Used in VL’s as well Model Typ 38? KBA 70023? Red stitching

VK GrpA Similar Corse Model Type V35 KBA 70088 The horn button retainer is impossible to get. Also re released as Monte Carlo with a grained leather.

See horn pad

VL GrpA Ghibli Model Typ V36 Has horn buttons under dimples. Some horn pads have smaller triangle. No stitching

3 different horn pads used, final one has embossed Peter Brock signature

Sloper

4 Spoke version of the Ghibli wheel, Ghibli 4 Seen on a few cars. Has horn buttons under dimples. Possibly VN GrpA

VL Grp 3 Ghibli

VL LE, Sports and others Known as Cobra White stitching

Magnum Momo Moretti

Sloper

Magnums Momo Gritti Also available with silver spokes.

VL Director "Design by F.A. Porsche" horn button has PD for Porsche Design Linea (on the right)

VC horn button and horn pad also used on the VH ADP

Peter Brock signature horn button, commonly found in Flyers and Magnums.

Sloper

Black red Black HDT horn button, found in VK GrpA and others.A Blue black blue also exists.

VK GrpA horn button retainer. Has fine radius on outer edge and step underneath. Will fit all wheels.

The VL GrpA wheel did not have stitching around it, seems unique. Momo regularly revived older models and renamed them. Grained and smooth leather was used by Momo. The VC wheel was also available without horn pad (no holes) Momo hubs came to HDT black and were painted to suit the trim. Hub number 4805 A Boss hub looks almost the same as the Momo one. 360mm horn pads fit the 380mm wheels. Horn pads were interchanged and custom pads available. Horn buttons are now smaller. The larger button retainer rings are impossible to get. The VH wheel was fitted to Ferrari’s and are big bucks in the States The Flyer was fitted to some Jap thing in Europe and gets over 1000 euros when one comes up.

Sloper