Slitter Machine
-
Upload
mazadul-hasan -
Category
Education
-
view
805 -
download
5
Transcript of Slitter Machine
Slitting Machine
Prepared By : Mazadul Hasan sheshirID: 201000040000813th Batch (Session : 2009 - 2013)Department : Wet Processing Technology Email: [email protected] ( Facebook)Blog : www.textilelab.blogspot.com
Southeast University Department Of Textile
EngineeringI/A 251,252 Tejgaon Dhaka Bangladesh
Prepared By :
The slitting machine is used in processing fabrics in the open line in the
fishing section. The slitting machine consists of a blade and a sensor
attached to the blade which indicates the needle line during slit opening
the fabric for processing. In the slitting machine the fabric is passed
through the twister over the basket containing exhaust fan for circular
dropping of the fabric and the blade for cutting the needle line of the
fabric and then from the padder and immersion roller through to the
turning and delivery roller. Finally the open width fabric is delivered.
Slitting Machine
• Slitting the fabric to turn tubular fabric to open width fabric.
• Softening the fabric by applying softeners.
• Reducing the content water in the fabric.
• Squeezing the fabric for proper chemical penetration.
Function of the Machine:
• J-Box.• Twister.• Centering Roller.• Basket with Exhaust Fan.• Knife.• Padder/ Immersion roller.• Turning Roller.• Tension Roller.• Sensors.• Free Roller
Main Parts of the Machine:
Slitter Basket
Detwister
Cutter unit with automatic needle path detector
• Open the fabric from the rope form.
• Reduce the water content
• To slit the fabric from tube form
• Apply overfeed to give some compaction.
• Width-wise stretch the fabric.
• Plait the fabric
Machine Function:
Basket (M/C)
J. Box (Padder)
Retested
Slittering Revice (Shape &Knife)
Spindle R/r
Cantering R/r
Spindle R/r
Squeezer
Take-up-roller
Pleiter
Delivery Basket
Working Flow Chart :-
Basket
Sensor
Twister
Knife
Centering RollerDelivery Roller
Tension Roller
J-Box
Schematic Diagram of Slitting Machine
Figure: Schematic diagram of Rope Opening, Slitting & Dewatering Machine
Cutting tube with Blade and Needle mark detector
Over feed and Padder pressure of Slating Machine:
Bianco Rope Opening, Slitting & Dewatering Machine
•J-Box: Squeeze the fabric to reduce the water contains. Water reducing
percentage depends on J-Box pressure.
•Detwister: By the detwister rope formed fabric become untwists form. (due
to action of sensor)
•Hand Wheel: It is manual and used for guiding the rotary blade.
•Turn Wheel: It controls the fabric rotation
•Rotary Blade: To cut the fabric through break wales line.
•Ring: To help cutting.
•Guide Roller: To guide the fabric to plaiting
•Plaiter: To plait the fabric.
•Sensor: Sense for cutting through break wales line.
Function of main parts
The bianco tensionless tubular fabric slitting and opening lines are used after the wash process or the dyeing station.
1. The fabric, placed in a basket in rope form. 2. It is made to pass through the squeezing unit where most of the
impregnation liquid is extracted. 3. Then it enters the detwister, which eliminates the tension of the rope
and is prepared for the slitting and spreading processes.
4. The container is placed on a platform whose rotation, synchronized with the action of the detwister, untwists the rope preceding the entrance to the detwister.
5. The latter is placed at the top of the structure, for optimal distance from the automatic slitter, so as to enhance the effectiveness of rope detwisting and spreading.
Basic Operation Principle:
6. Then the untwist form fabric is transferred to the basket by means of motorized belts and then it moves on towards the slitter without stresses that would can be widened upto a diameter of 80 cm.
7. The cutting line can be controlled by means of basket rotation.
8. From conveyor belt fabric is passed through dogal centering roller (It constitutes a
9. compacata fabric centering system, with faster centering action and
enhanced efficacy compared to traditional centering devices.) 10. The open with fabric is passed through squeezing system to extract
the greatest possi-ble quantity of impregnation liquid from the fabric, by squeezing it between two rub-ber coated rollers. (It structure is highly compact and sturdy, and it can be made either of iron or of stainless steel).
11. After squeezing the fabric it go to the plaiter to plait on a trolley.
Cutting Line Check: Operator checks fabric cutting line. Rotary blade cut fabric through wales line or not.
Bow and Slant Check: Operator checks bow and slant at delivery side.
Faults Check: As mentioned earlier.
CHECKING PARAMETER:
Machine specification: Brand name: CORINO MACCHINE Type/model no: Company: ItalyYear: 2005No of motor: 08
Corino
1. Used to remove excess water after pretreatment and dyeing
2. To slit the tube fabric by the knife for opening of the fabric and ready
for stentering
3. Delivered fabric is crease free state
4. Before squeezing balloon is formed with the help of compressed air
passing by a nozzle or air sprayer
5. It can control the diameter of fabric and GSM and shrinkage by over
feeding mechanism
6. To impart soft finish to the fabric by using required softener.
Function of the Machine: Corino
Fabric path of Slitting, De-watering & De-twisting m/c
Corino
Production:
Capacity: 10 tones/shiftActual production: 7 tones/shift.
Utility:
1.Water2.Electricity3.Compressed air or Processed air (to form the tube fabric into ballon
with a view to remove crease)
Corino
• Squeeze roller (to remove water)
• Stretcher (to control width)
• Over feeding wheels (to control GSM)
• De-twisting device (To delivery the fabric roll in untwisted form)
• Folding device (to delivery the fabric in folded form)
• Squeezing roller
• Padder for softener
Main parts of the machine: Corino
Controlling points or Control system:• Overfeed control
• Pressure
• Speed control
• Width control
Power consumption:
Voltage: 400V
Frequency: 50Hz
Maximum power: 24kwatt
Manpower Required:
Worker: 02
Corino
Bar PSI Kg Lbs1 14.5 90 200
2 29 205 450
3 43.5 315 700
4 58 425 940
5 72.5 540 1200
6 87 650 1440
Feed roller pressure: Corino
Fabric Type Pad pressure Speed Over FeedS/J 2.5 – 3 40 -50 40PK 3 40 -50 401x1 Rib 3 -3.5 50 -60 252x2 Rib 3 – 3.5 60 40P/I 3 – 3.5Mar S/J 2 40 40
2.5 40 40Mer 1x1 Rib 2.5 – 3 50 25Mer 2x2 Rib 2.5 – 3 60 40Mer P/I 2.5
Work instruction:Corino
Corino
•Check turntable tire pump & spring pressure.
•Grease the turntable.
•Check de twister speed reducer, transmission belts pneumatic brake.
•Check oiler oil level of the fabric expander.
•Check movable reel plaiter driving system.
Corino slitting machine Maintanance
Corino
MONTHLY MAINTENANCE CHECK LIST
• Grease the squeeze for the rope fabric part.
• Grease the dewatering bearings
• Grease the bearings of water slitting device & driving screw for basket
opening.
• Grease the bearings of open width squeezer.
• Change gear oil once a year.
( Corino slitting machine)
Corino
Horizontal cutting System
Front view Of a Slitter
Cutting tube with Blade and Needle mark detector
Slitting of a tubular Knitted Fabrics
Spreader –spiral roller
Slitter –Padding zone
1. Yarn Manufacturing TechnologyLink:http://www.facebook.com/pages/Yarn-Manufacturing-Technology/485014954866808
2. Fabric Manufacturing TechnologyLink:http://www.facebook.com/pages/Fabric-Manufacturing-Technology/459520217425605
3. Garments Manufacturing TechnologyLink:http://www.facebook.com/pages/Garments-Manufacturing-Technology/472364799463126
3. Wet processing TechnologyLink:http://www.facebook.com/pages/Wet-Processing-Technology-Dyeing-/468645219825404
4. Fashion-Design-and-TechnologyLink:http://www.facebook.com/pages/Fashion-Design-and-Technology/587655294583875?ref=ts&fref=ts
My Facebook Textile related Pages
http://www.textilelab.blogspot.com