Slip yoke to be inserted into gearbox output
2
02 9774 4419 dellowconversions.com.au Version 1, October 2014 Install supplied circlips in these grooves in the bearings Install remaining two circlips in grooves in remaining bearings as before Slip yoke to be inserted into gearbox output Weld yoke to be welded to tailshaft TAILSHAFT YOKE - ASSEMBLY INSTRUCTIONS
Transcript of Slip yoke to be inserted into gearbox output
02 9774 4419dellowconversions.com.au
Version 1, October 2014
Install supplied circlips in these grooves in the bearings
Install remaining two circlips in grooves in remaining bearings as before
Slip yoke to be inserted into gearbox output
Weld yoke to be welded to tailshaft
TAILSHAFT YOKE - ASSEmbLY InSTrucTIOnS
02 9774 4419dellowconversions.com.au
Version 1, October 2014TAILSHAFT YOKE - WELd YOKE InSTrucTIOnS
Multiple diameters on the weld yoke can be used for differenttailshaft diameters. The weld yoke can also be machinedto match tailshafts that do not suit the pre-machined sections.
Weld
