Gearbox Rotation - runvawinch.com.au Gearbox Rotation.pdf · Gearbox Rotation Undo the tie bar...

1
Gearbox Rotation Undo the tie bar bolts on the gearbox end. Carefully pull the gearbox away from the drum. Undo all the bolts. Once all the bolts are removed: - lift the gearbox housing bracket off the gearbox. - Rotate the bracket into the new desired position. Carefully replace gearbox housing bracket and tighten bolts. Replace and tighten the two bolts previously removed. Carefully slot the gearbox back onto the drum. Runva Winch Distribution PTY Limited runvawinch.com.au 1 2 3 4 5 6

Transcript of Gearbox Rotation - runvawinch.com.au Gearbox Rotation.pdf · Gearbox Rotation Undo the tie bar...

Page 1: Gearbox Rotation - runvawinch.com.au Gearbox Rotation.pdf · Gearbox Rotation Undo the tie bar bolts on the gearbox end. Carefully pull the gearbox away from the drum. Undo all the

Gearbox Rotation

Undo the tie bar bolts on the gearbox end. Carefully pull the gearbox away from the drum.

Undo all the bolts.Once all the bolts are removed: - lift the gearbox housing bracket off the gearbox.- Rotate the bracket into the new desired position.

Carefully replace gearbox housing bracket and tighten bolts.

Replace and tighten the two bolts previously removed.

Carefully slot the gearbox back onto the drum.

Runva Winch Distribution PTY Limited runvawinch.com.au

1 2

3 4

5 6