SLink - Panos Inž · PDF fileSLink Solutions for Site ... Rosenberger provides a solution for...
Transcript of SLink - Panos Inž · PDF fileSLink Solutions for Site ... Rosenberger provides a solution for...
SLink
Solutions for Site installation
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 4
FTTA: Solutions
Rosenberger Site Solution provides products for complete wiring of radio base stations - from
the antenna to the base station:
Discrete Cabling Trunk Cabling
without box
Trunk Cabling
with box
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 5
FTTA: Solutions
Hybrid Cabling
without box
Hybrid Cabling
with box
FiPro – reuse of
Existing feeders
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 6
FTTA: SLink Discrete Cabling solution
Description
Single Duplex Fiber Optic connection for each RRU
Direct connection between BBU and RRU
Advantages Most common solution and used since several years in
the field
High crush resistance
Challenges OEM specific connection required for each assembly
Less flexible in case of technology change
Higher installation cost
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 11
FTTA: SLink Trunking solution
Description
Multi fibers in one single cable
Up to 48 fibers
Jumper connection to RRU
Advantages
Easy and efficient installation (hoisting
integrated)
Future proof installation High flexibility,
individual jumpers
can be connected
Space saving and low wind load
The best price performance ratio
for length > 35m
Connector fanouts packed in water- and
dust-proof protection-tubes
One cable for 3,6, 12, … RRU‘s
Reduced installation time / cost
Hybrid Cabling
without box
Hybrid Cabling
with box
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 12
Installation Tube Outdoor,
IP67 water-proof
PreCONNECT FIBER Feeder
Outdor Feeders-Variants
Challenges Distributed antennas
Limited flexibility and scalability with box less solution
Easy and efficient installation
Universal and future proof installation
Rosenberger provides a solution for connecting BBU and RRU with
bandwidth of more than 10Gbps which is independent of the used OEM
FTTA: SLink Trunking solution
Copyright © Rosenberger 2013 U. Albrecht January 2014
FEATURES AND BENEFITS
Single fiber trunk with 6 to 36 fibers
(3 to 18 Pairs / Channels)
LC Compact on bottom; RDC on top. Connections to customer specified connections
Singlemode or multimode
No enclosure at tower top necessary.
Disadvantage and Problem
Overlength of jumper cable on the mast is a problem.
Extension cable is necessary. Push pull is currently not available.
FTTA - Direct Fiber Trunk System
Copyright © Rosenberger 2013 U. Albrecht January 2014
Standard vs. Hybrid Cabling Solution
Hybrid cable
Antenna
RRU
FTTA Distribution
Enclosure
Fiber trunk
Fiber Jumper
Antenna
Standard Solution Hybrid Cable Solution
RRU
Power Jumper
Power Cable
Canister
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 17
FTTA: SLink Hybrid Boxless solution
Description
Pre connected cable with multi fiber and power with tower
distribution unit as one piece.
Robust RDC interface (similar to N-connectors)
Advantages
Easy and efficient installation
Reduced installation time / cost
Only one cable run to the tower top
Future proof installation High flexibility, individual jumpers
can be connected
No splice inside canister
Double protection against induced currents from lightning
stroke
which can reduce cost for surge protection up to 50%
No mast box -> no additional rental costs
Slim outer diameter due to coax design of power cables
Space saving and low wind load
Rosenberger No.:
L98B-
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 22
FTTA: SLink Distribution Enclosure
At tower top for fiber and power management with RRus. Can also
be used at bottom for power and fiber distribution.
Description Available Variants with 3 to 30 LC Dup
Ventilation seal
Mast and wall mount fixation
Operation temperature -40°C to +85°C IP 66/67
Advantages Easy, efficient and safe installation with only 2 bands
Low windload
Weather proof distribution box
FTTA Hybrid Distribution
enclosure
Fiber Distribution Unit
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 24
FTTA: SLink Tower Multi-Fiber System
Tower Multi-Fiber
System
One run of fiber for
3 RRUs without
enclosure
RDC jumper
Description
Pre connected multi fiber cable and tower distribution unit
as one piece.
Robust RDC interface (simlar to N-connectors)
Jumper connection to RRU
Advantages
Easy and efficient installation
Reduced installation time / cost
Future proof installation High flexibility, individual jumpers
can be connected
Space saving and low wind load
No mast box -> no additional rental costs
Challenges
Distributed antennas
Limited flexibility and scalability
with box less solution
Copyright © Rosenberger 2014 V1.1 www.rosenberger.com | 27
FTTA: SLink FiPro – Fiber and Power to the Roof
Top Optical Box or Top Hybrid Box
Pigtail fiber (bottom end open)
Fiber Seal (feeder / fiber)
Power Cable
Connections:
Power Cable
Power Cable
Connection
Fiber Cable
Power Cable
Rosenberger No.:
SLPCC001-C07N
Fiber-Seal protects the
entry point of a fiber
optic cable into the
centre contact.
Rosenberger No.:
1: SLFS001-C05N
2: SLFS001-C06N
3: SLFS001-C07N
Power Cable
Connection
Product-Overview
1 2 3
BTS /
Node B
BBU
Power Supply
RF feeder
cable
Rosenberger No.:
SLPCC001-C05N
Rosenberger No.:
SLPCC001-C06N