SkyView SV Tpdx
2
SkyView SV-XPNDR-26X Mode-S Transponder SV-XPNDR-26X SkyView SV-XPNDR-261 and SV-XPNDR-262 Mode-S Transponders : Integrated: Made for the SkyView System with control and annunciation appearing on the SkyView Display. The transponder module can be mounted anywhere in the airplane that is convenient. Traffic: Features TIS Traffic (USA). Meets USA and Europe ADS-B Out Mandates: Note, full ADS-B Out compliance requires a TSO-C146A GPS (WAAS) to be connected. NOTE ON U.S. COMPLIANCE: Currently the FAA ADS-B requirements specify the hi gher power Class 1 transponder. For U.S. customers, we recommend only the Class 1 SV-XPNDR-261. Dynon Warranty, Support, and Service: These transponders come with a 3-year Dynon Warranty. SPECIFICATIONS SV-XPNDR-261 For High Performance Aircraft and ALL US Aircraft SV-XPNDR-262 For <15,000 feet, <175 knots Not for US Type Class 1 Mode S Class 2 Mode S Certification ETSO 2C112b, C166a and TSO C112c, C166a, approved for IFR and VFR flight Compliance ED-73B, ED-14F/DO-160F, DO-178B, DO-254 level C, DO-260A class BO, DO-181C
-
Upload
jaafar-ali-mohamad -
Category
Documents
-
view
9 -
download
0
Transcript of SkyView SV Tpdx
5/12/2018 SkyView SV Tpdx - slidepdf.com
http://slidepdf.com/reader/full/skyview-sv-tpdx 1/3
SkyView SV-XPNDR-26X Mode-S
Transponder
SV-XPNDR-26X
SkyView SV-XPNDR-261 and SV-XPNDR-262 Mode-S Transponders:
Integrated: Made for the SkyView System with control and annunciation appearing on the
SkyView Display. The transponder module can be mounted anywhere in the airplane that isconvenient.
Traffic: Features TIS Traffic (USA).
Meets USA and Europe ADS-B Out Mandates: Note, full ADS-B Out compliance requires
a TSO-C146A GPS (WAAS) to be connected. NOTE ON U.S. COMPLIANCE: Currently
the FAA ADS-B requirements specify the higher power Class 1 transponder. For U.S.
customers, we recommend only the Class 1 SV-XPNDR-261.
Dynon Warranty, Support, and Service: These transponders come with a 3-year Dynon
Warranty.
SPECIFICATIONS
SV-XPNDR-261
For High Performance
Aircraft
and ALL US Aircraft
SV-XPNDR-262
For <15,000 feet, <175
knots
Not for US
Type Class 1 Mode S Class 2 Mode S
CertificationETSO 2C112b, C166a and TSO C112c, C166a,
approved for IFR and VFR flight
Compliance ED-73B, ED-14F/DO-160F, DO-178B, DO-254 level C,DO-260A class BO, DO-181C
5/12/2018 SkyView SV Tpdx - slidepdf.com
http://slidepdf.com/reader/full/skyview-sv-tpdx 2/3
Supply Voltage (DC) 9 - 33 V
Power Consumption
6 Watts (typical)
(idle:0.15 A, active:0.34 A
at14 V)
5 Watts (typical)
(idle:0.15 A, active:0.28 A at
14 V)
Transmitter Power 250 W nominal at connector 130 W nominal at connectorOperating
Temperature-40deg F to +158deg F (-40deg C to + 70deg C)
Cooling Requirement No fan required
Weight 0.9 Lb. (400 g)
Dimensions 2.4” x 1.8” x 5.6” (62 x 45 x 141 mm)
Mounting: At only 1 pound and 5.6” by 1.8” by 2.4”, the transponder module can fit into the
tiniest places and aircraft. A quick release mounting system allows for simple installation and
easy removal if needed for service.
Connections: The SV-XPNDR-26X connects to a serial data line on
each SkyView Display.
Mechanical Dimensions: The display mechanical drawings can be
downloaded here:
SV-XPNDR-26X Mechanical Drawing
TNC Connector: The TNC connector is not supplied by Dynon.
Specification: Dual Crimp RG142-400 AMP Male. (Example:
http://www.aircraftspruce.com/catalog/elpages/edmo2255556.php)
5/12/2018 SkyView SV Tpdx - slidepdf.com
http://slidepdf.com/reader/full/skyview-sv-tpdx 3/3
