Sky implant system bredent

SKY Implant system

Presentation of the system

2 Tel. (+49) 0 73 09 / 8 72-4 40 | Fax (+49) 0 73 09 / 8 72-4 44 | www.bredent-medical.com | e-mail [email protected]

Every patient has special needs and requirements, which have to be considered when determining the appropriate treatment.

Younger patients want esthetic closure of gaps to retain their young look as long as possible.

Older patients who are facing edentulousness still want to enjoy life and therefore prefer immediate fixed restorations, allowing them to continue participating in their social life and enjoy eating.

The quality of life of edentulous patients could be considerably increased with the help of a firmly fixed prosthesis, especially regarding the quality of their nutrition and the ability to make an untroubled appearance in public.

For us, implant prosthetics starts with the preservation of the hard and soft tissue.

By effectively fighting bacteria with the HELBO therapy, periodontally damaged teeth can frequently be preserved, and, if this is not possible, the foundation can be laid for reliable early implant placement.

...gapless...Aesthetic restoration Patients with good residual dentition, for whom the implant restorations are used to close gaps when there is loss of a single tooth or edentulous spaces.

...tempting...Stable teeth: immediately!

Patients who are about to lose their teeth and who feel too young to wear dentures, whether implant-supported or not.

Cover picture: Dr. Alexandros Manolakis, Thessaloniki, Griechenland

3

With the right materials for bone augmentation and the new absorbable membrane angiopore, we can also provide you with a possibility to reconstruct bone defects again.

Furthermore, it is possible to ensure that implants are positioned correctly from a prosthetics point of view, using our prosthetics-oriented implant planning system SKYplanX, so that the restoration can be carried out in a stable and predictable way.

The bredent group has developed various therapeutic concepts for implant prosthetics in different groups with the philosophy of bringing together and bundling implant technology and expertise in the dental laboratory, so you may offer the possibility of optimum care to your patients.

These therapy concepts allow you to provide individual care to your patients and thereby to rely on standardised procedures, so that a high-degree of cost-effectiveness results, in order to minimise treatment times and costs and thus to do justice to the expectations of your patients.

...in the thick of it...Quality of life in old age

Edentulous patients with ill-fitting den-tures, who have often resigned themselves to their supposed fate, are given a new quality of life with an implant-supported restoration – either an economic hybrid prosthesis or an expensive removable bridge.

Navigated implantation

The SKYplanX 3D planning system offers new opportunities for carrying out perfect planning on the PC and then transferring the results reliably and accurately into clinical practice.

Regeneration

Successful implantology begins with the careful extraction of the teeth and the augmentation of the bone:• materials for bone stabilisation• materials for repairing damaged bone• therapeutic concepts for controlling inflammation

Inst

rum

ents

Tool

sSK

Y fa

st &

fixe

dIm

plan

tsSK

Y sy

stem

min

iSKY

Perm

anen

t co

s-m

etic

res

tora

tion

Impr

essi

onM

odel

Pros

thet

ics

over

view

Surg

ery

Rem

ovab

le


The SKY solutions

Bridges on atrophied and jaws with low heightThe use of implants placed at an angle, narrow implants and narrow abutments allows to make optimum use of local bone, reduce the risk of implant placement and enable the fabrication of favorably-priced high-quality fixed restorations on just a few implants.

Removable restorationsComplicated bone augmentation measures can be avoided when fixing prostheses using narrow implants or implants placed at an angle, which securely fixes the prosthesis in the local bone. Excellent posterior support provides a high level of wearing com-fort.

Short implantsThe implant neck design of the SKY classic implants (8 mm) al-lows placement at the supracrestal level so that they can be used in the same way as 6 mm implants.

Transversal/occlusal screw-retained bridgesIn addition to the occlusal screw-retained bridges, there is also the possibility of prefabricated transversal screw-retained bridg-es, which can be bonded in the mouth in a way to eliminate stress and secure passive-fit.

5

Individual White-Shade abutments with Off-Peak character-isticThe use of SKY elegance abutments allows the quick and simple fabrication of individual White-Shade abutments with proper anatomical designs in the laboratory. The Off-Peak characteristic enables insertion of these abutments immediately after implant placement/exposure to that repeated traumatization of the soft tissue can be avoided.

Narrow gaps Narrow gaps can be closed in an esthetically appealing manner using the new narrowSKY implants and corresponding SKY es-thetic S and SKY elegance S abutments.

Highly esthetic ceramic restorations Prefabricated, anatomically shaped ceramic abutments are avail-able for highly esthetic restorations and inexpensive treatment with implants. Special cases can be restored using laboratory-fabricated individual abutments, which feature a titanium base.

SKY

syst

em


mini2 narrow

mini1

2.8 3.5 Nnarrow

platform

3.2

2.8

Implants overview

Diameter covering

Detailed information can be found in the miniSKY system presentation from page 61 onwards.

7

classic

4.0 regular

platform

4.0 regular

platform

3.5 regular

platform

4.5 regular

platform

5.5 regular

platform

3.5 regular

platform

4.5 regular

platform

SKY

Syst

em


narrow

3.5 N

3.5 N

3.5

narrowSKY 3.5 N and SKY regular platform

narrowSKY 3.5 N

narrow

Ø 3,5 mm

3.5 N

5.5

4.5

4.0

3.5

Ø 4,0 mmØ 3.5 mm

Torx® identical

9

3.5

4.0

4.5

3.5

4.0

4.5

5.5

3.5 4.0 4.5 5.5

SKY

Syst

em

blueSKY and SKY classic

classic

5.5

4.5

4.0

3.5

Ø 4,0 mmØ 4.0 mm

Torx® identical

10 Tel. (+49) 0 73 09 / 8 72-4 40 | Fax (+49) 0 73 09 / 8 72-4 44| www.bredent-medical.com | e-mail [email protected]

1st dimensionThe narrow finished surface with micro grooves opti-mally protects the accumu-lation of epithelial tissue.

Isocrestal implant positionIn this implant position, the soft-tissue attachment takes place predominantly on the abutment. A soft-tissue cuff is made on the implant for long-term bone protection.

3rd dimensionThe blasted and high-tem-perature etched surface of-fers the ideal coarseness for osseous integration. The macro grooves support long-term bone preservation.

2nd dimensionThe narrowly etched surface with the uniform velvety structure stabilizes connec-tive tissue.

Finished surface Gingival attachment

Etched surface Connective tissue stabilization

Blasted, etched surface Osseous anchoring

Depending on the implant’s positioning, a corresponding coronal implant design is needed for optimally fulfilling the requirements of the various hard and soft tissues.

0,1

-0,2

mm

0,5

mm

3D osseo connect surface (ocs®)

Surface

0

2,5

5

7,5

10

12,5

15

17,5

20

µm

22,5

µm

17,5

15

12,5

10

7,5

5

2,5

0

µm

1,2

1,1

1

0,9

0,8

0,7

0,6

0,5

0,4

0,3

0,2

0,1

0

narrow

11

Supracrestal implant positionIn this implant position, the soft-tissue attachment takes place predominantly on the implant. For this reason, the coronal implant design must be adapted to these requirements.

1st dimensionThe highly finished surface with micro grooves offers a wide space for the epithe-lial attachment and is easy to clean in the recall.

2nd dimensionThe widely etched surface with the velvety structure stabilizes connective tissue.

3rd dimensionThe blasted and high-tem-perature surface offers the ideal coarseness for osseous integration.

Finished surface Gingival attachment

Etched surface Connective tissue stabilization

Blasted, etched surface Osseous anchoring

Excellent hydrophilic properties

The hydrophilic properties of a surface are reliable scientific indicators for the ability of bone apposition to a surface. The hydrophilicity of the blueSKY implant ensures that blood will cover the entire implant surface almost immediately after the first contact.

Competitor 1 Competitor 2 The contact angle of the osseo con-nect (ocs®) which is considerably more obtuse than those of competi-tors’ products confirm the results ob-tained in clinical tests.

0,5

mm

1,5

mm

SKY

Syst

emclassic

0

2,5

5

7,5

10

12,5

15

17,5

20

µm

22,5

µm

1,2

1,1

1

0,9

0,8

0,7

0,6

0,5

0,4

0,3

0,2

0,1

0

µm

17,5

15

12,5

10

7,5

5

2,5

0

classic


narrow

Ultra-modern implant design with osseo connect (ocs®) surface for high primary stability and long-term success of implant placement

Double thread

highest torque in the run-out

atraumatic in the cortical bone

Spee

d (r

pm)

Fast in situ

Fast and atraumatic

The double thread allows fast and uniform insertion of the implant. No undesired tensile stress is created.

Maximum primary stability

The conical-cylindrical implant shape and the use of suitable drills provide the basis for excellent primary stability.

Conical-cylindrical implant shape

Spee

d (r

pm)

Implant design

13

Kompressionsgewinde

classic

blueSKY and SKY classic are based on the same tried and tested design and set with the same instruments.

Improving the bone quality

The bone-quality oriented sur-gical procedure and the com-pression thread condense the bone around the implant site and hence increase the primary stability.

Compression thread

The perfect systemThe exceptional propertis of titanium grade 4 KV (cold formed) provide the basis for implants, suprastructures, abutments and screws. Special raw materials are used for these highly stressed components (grade 4, cold formed, bredent medical).

Implants and abutments made from titanium grade 4 (cold-worked)

Titanium

Designation Condition

Grade 2

Grade 3

Grade 4

Grade 4 KV standard

Grade 4 KV bredent medical

Mechanical properties

Tensile strength 0,2 % yield limit Elongation at N/mm2 N/mm2 min. fracture % min.

345 230 20

450 300 18

550 440 15

≥ 680 ≥ 520 ≥ 12

800-900 ≥ 700 ≥ 10

SKY

Syst

em


Compared to conical connections with press fit, the flat connection with protection against ro-tations provides major advantages for prosthetic restorations since the vertical height of the abut-ments is defined, i.e. it is much easier and takes less time

• to integrate the abutments • to achieve „passive-fit“ for large-size suprastructures

Thanks to the very long tube-in-tube connection (3.5 mm), masticatory forces are directed from the abutment into the implant in a perfect way:

• well-balanced distribution of forces between the internal connection and the implant; hence fracture of screws is avoided • no notch stress• no notch stress at the implant neck which may cause fracture of the implant neck under unfavorable conditions

Long-term stable connection

Implant abutment connection

15

Hexagon:narrow line application

Hexagon:very large tolerance

Hexagon:very high notch stress

Torx®: has six large force transfer surfaces • significantly higher torques for the same force applied

• easier insertion of the implant

• no damage to the internal geometry at a high torque either

Torx®: wave profile without sharp edges• no clamping of the implant and insertion instrument

• no damage to the implant

• extended service life of the implant-abutment connection

Torx®: has an extremely small tolerance• clearly improved friction fit

• extended durability of abutment and implant

• reduction of loosening of screws

If screws and screw joints are involved. The Torx® is the gold standard in mechanical engineering and the automotive industry and in implant dentistry as well.

Advantages of the Torx®

REF SKYASET9

+ =

SKY

Syst

em

For 12 positions

The normal position and R-versions provide 12 positions for the angled abutments, which means that these always can be optimally orientated.

NormalpositionTorx®

12 positions

SKY abutment selection set

With the help of the SKY abut-ment selection set, the appro-priate abutments with the cor-rect orientation can be selected simply and quickly in the labo-ratory.

SKY abutment selection set

R-type abutment

=30° swiveled

��


Indication

Prosthetics for every implant position

The crest-like design of the SKY classic implant is particularly suitable for trans-gingival healing, as both the epithelial tissue and the connective tissue are optimally attached. The bone is maintained to a high degree by the blasted and etched surface.

Through the trans-gingival positioning, this implant is also excellently suitable for use as a short implant in combination with other longer implants, which can also easily be placed at bone level. In this way, it is now possible to anchor the 8 mm SKY classic implants at a depth of 6 to 6.5 mm, so that major and elaborate surgery can be avoided. These implants are available with a diameter of 4.0 and 4.5 mm.

Furthermore, the new SKY classic implants simplify implant insertion if the gingiva is only die-cut. In this case, the insertion depth can be controlled more easily than when implants are placed at bone level.

The classic SKY implant is ideal to avoid milling off bone in narrow or uneven ridges.

The machined section avoids accumu-lation of plaque to exposed implant necks.

In transgingival implant insertion, depth control is made easier.

Short implants in an interlocked construction, anchored 6.5 mm into the bone.

Supracrestale Position Short implants

SKY classic neck design

17

In the case of isocrestal positioning of the implant, the shape of the abutment gains particular importance, in order to achieve optimum attachment of the soft tissue.

The SKY esthetic abutments offer the ideal prerequisite for this. With the concave-convex hybrid form and the built-in platform switch, the surgical need for greater clearance above the implant is satisfied to achieve optimum attachment of the soft tissue, on the one hand, and this form provides the dental technician an optimum prerequisite to achieve optimal aesthetic results, on the other. The shaping of the gingival proportions is performed either using the SKY esthetic gingiva former or the SKY temp abutment with a provisional restoration, or as an individual gingiva former.

Both have the same diameter as the SKY implant platform, so that soft-tissue can neither get caught between the implant and the augmentation while making impressions, nor when integrating the abutments, and thus the precision of the impression and the long-term stability of the implant-augmentation interface are assured.

Moreover the SKY esthetic line offers precision-manufactured impression abutments with corresponding diameters for open and closed impressions. This is an impression system comprising a titanium abutment and a plastic cap which has long and short screws for the respective impressions and which exels thanks to the precision during impression taking.

Indication

The crestally structured blueSKY implant is ideal - for placing the implant flush with the bone - for preserving the bone - for use in the augmented ridge - for improving the primary stability

Implant position flush with the bone Augmented implant site

SKY

Syst

em

narrowSKY / blueSKY neck design


REF SKYXOT21

Six implants - one set of instruments

SKY OP-Kit OT21

Surgical procedure

classic

narrowmini2

mini1

19

Atraumatic tapping thanks to reduced contact area

Apical compression thanks to increased contact area

Consistently high primary stability

Hard bone Medium-hard and soft bone

D1 D2-4

D1 D2 D3 D4

Chiru

rgie

New drilling sequenceQuality-orientated surgical protocol

Hard bone

Atraumatic tappingPrevention of bone overloading during surgery

Medium-hard to soft bone

Bone compressionAchieving primary stability

Bone density from hard to soft

It is recommended that the transition area between hard and medium-hard bone is initially prepared using the drills D2-D4. If the torque exceeds 45 Ncm when the implant is screwed in, the implant should be removed again and the cavity extend-ed using D1 drills. This procedure ensures primary stability in every case and avoids overloading the bone.

D1 D2-4


Surgical protocol

• optimized, bone quality-oriented set of instruments and surgical protocol for unsurpassed primary stability• Drills with detachable drill stops• Reduction of the number of drills for increased control and dependability during surgery

Medium hard / soft bone

Hard bone

Pilot drill800 - 1.000 U/min.

Twist-Drill800 - 1.000 U/min.

4.03.5

4.03.5

REF SKYD1235 300 rpm/min.

REF SKYD1240300 rpm/min.





3.5 4.0 4.5 5.5

Detachable drill stops

The detachable drill stops are arranged so that they can be easily taken up with the drill and fastened with one hand thanks to the cavities in the OP-Tray insert. The ruler on the compartment for small parts helps to select the correct drill stop easily and quickly. The drilling depth is approx. 0.7 mm greater than the implant length.

Surgical procedure

narrow

21

4.5

Crestal drill300 rpm/min.

3.5

or

4.0

or

4.5

4.5



or

5.5

REF SKYD1255300 rpm/min. 5.5

5.5REF SKYD3455 300 rpm/min.

3.5 N

or

Chiru

rgie

With the 3.5 diameter blueSKY and SKY classic implants, the crestal drill is only sunk up to the laser marking.The crestal drill is completely sunk in the fol-lowing implants: • narrowSKY• blueSKY 4.0 to 5.5• SKY classic 4.0 to 4.5

classic


Insertion concept

blueSKY - fast, reliable and atraumatic implant placement

Open the new double sterile packaging. Remove the implant with the insertion instrument for the ratchet or the contra-angle.

Use the same instrument to remove the cover screw ...

... and screw it directly into the implant. Thanks to the smooth cone the screw needs to be only slightly tightened and will not get jammed. Recommended max. torque: 10 Ncm.

The conical Torx® allows to hold the implant safely.

Removing and screwing in the implant and the cover screw without changing instruments.

blueSKY and SKY classic implants come in double-sterile packaging. They are supplied in a colour-coded carrier with details of the applicable length so that mistakes can be avoided. After opening the Tyvek foil, it can be directly removed using the SKY TK insertion instrument.

The implant is inserted and can be screwed in immediately.

23

L6 L8 L10 L12 L14 L16

SKYXST06 SKYXST08 SKYXST10 SKYXST12 SKYXST14 SKYXST16

SKYS0840 SKYS1040 SKYS1240 SKYS1440 SKYS1640–

– SKYS0845 SKYS1045 SKYS1245 SKYS1445 –

Twist-Drill

Drill

Drill

4,0

4,5

3,5

5,5

REF

REF

REF

REF SKY-DR41 4.1

REF SKY-DP06 3.5 short

REF SKY-DP08 3.5 long

REF SKYDT13L 1.3

REF SKYDT23K 2.25 short

REF SKYDT23L 2.25 long

REF SKYXCD35

narrowSKY 3.5 N

REF SKYXCD40blueSKY, SKY classic4.0

REF SKYXCD45blueSKY, SKY classic4.5

REF SKYXCD55blueSKY, SKY5.5

REF SKYD1235 3.5

REF SKYD1240 4.0

REF SKYD1245 4.5

REF SKYD1255 5.5

REF SKYD3435 3.5

REF SKYD3440 4.0

REF SKYD3445 4.5

REF SKYD3455 5.5

REF SKYCD35n

blueSKY, SKY classic3.5

Bone bur rpm/min 800-1.000 Twist-Drill rpm/min 800-1.000

Pilot drill rpm/min 800-1.000

Drill for hard bone rpm/min 300 Drill for medium hard and soft bone rpm/min 300

Crestal drill rpm/min 300

REF SKY-DV12

SKY Drill extension

Ordering information

Drill and drill stops

Surg

ery


Order Information

blueSKY

3.5

REF bSKY 3510Length 10 mm




4.0






3.5

REF kSKY3510Length 10 mm




4.0


Length 10 mm




SKY classic

narrowSKY 3.5 N

3.5 N

REF nSKY3510Length 10 mm




Cover screw for narrowSKY Implants

The implant includes the cover screw.

3.5 N

REF kSKY4010

25

4.5





4.5





5.5




Cover screw for blueSKY and SKY classic implants

5.5 4.0 3.5 4.5

Impl

ants

Cover screw is incorporated into the implant.


Prosthetics overview

narrowSKY + blueSKY + SKY classicblueSKY + SKY classic with platform switch

Laboratory implant / gingiva former / impression abutments

SKY prov / SKY elegance

SKY elegance

SKY scan / CAD abutments

SKY uni.cone

SKY aesthetic impression abutments

SKY aesthetic abutments

SKY elegance

SKY zirconium abutments

SKY Locator®

R

27

blueSKY + SKY classic without platform switch

Pros

thet

ics

over

view

SKY aesthetic impression abutments Gingiva former / impression abutments

SKY temp / gingiva former

SKY titanium abutments

SKY fast & fixed

SKY Locator® / SKY ball head attachments

R

R

R R


Prosthetics

REF SKY-PA10

REF SKY-IA4 0

Impression abutment for open impression incl. screw

Impression abutment for open impression incl. screw

Implant analog

REF SKY-PA20

REF SKY-PS18

Screw - impression abutmentopen tray, short6 pieces

The impression abutment for closed impressions with prefabricated trays simplifies repositioning thanks to: • distinctive flat sides • deep horizontal groove • deep vertical groove

The impression abutment for open impressions with individual trays excels by: • distinctive retentions • short Torx® for divergent implants

The implant analog guarantees precision thanks to • distinctive retentions • protection against rotation

Perfect results both for open and closed impressions.

Material: TitaniumTorque: 10 Ncm

blueSKY SKY classic

11 m

m

18.7

5 m

m

Impression and model fabrication

11 m

m

13.7

5 m

m

29

10 m

m

REF SKYEMPA1

SKY esthetic impression abutment M open tray, with integrated screw, 24 mm long

REF SKYELPA1

SKY esthetic impression abutment L open tray, with integrated screw, 24 mm long

REF SKYEMPA2

SKY esthetic impression abutment M closed tray, with integrated screw

REF SKYELPA2

SKY esthetic impression abutment L closed tray, with integrated screw

REF SKYEAK22

SKY esthetic impression coping closed tray, 10 pieces

REF SKYEAK11

SKY esthetic impression coping open tray 10 pieces

REF SKYAPS18

SKY esthetic impression open trays, screw 18 mm short 6 pieces

For the impression of SKY esthetic abutments, appropriate impression abut-ments for open and closed trays are available for each diameter. The impres-sion abutments feature the following characteristics:

• The sulcus shape of the impression abutment is based on the SKY esthetic Line• The abutment has coronal retentions; suitable impression copings can snap in these retentions.• The copings can be aligned in 6 positions so that impressions can also be taken in small gaps without any problem• The impression abutments are available in the diameters M and L, for open and for closed trays• The screws are retained safely in the impression abutments so that they cannot fall out during the application

10 m

m


new

narrowSKYblueSKY SKY classic

blueSKY SKY classic

REF SKYESPA2

SKY esthetic impression abutment S (narrowSKY) closed trays, with trapped screw

REF SKYESPA1

SKY esthetic impression abutment S (narrowSKY), open trays, with trapped screw, 24 mm long

10 m

m

10 m

m

10 m

m

Impr

essi

onM

odel

10 m

m

10 mm


Prosthetics

Modular system - Gingiva formers to create the basis for bars and bridges

REF SKY-GF02

REF SKY-GF06

Gingiva former height 2 mmincl. screw

Gingiva former height 4 mm incl. screw

Gingiva former height 4 mm incl. screw

Gingiva formers in 3 distance heights

• 2 mm – yellow• 4 mm – silver• 6 mm – red

Also serves as the basis for bar constructions and ball attachments.The horizontal notch prevents the gingiva former detaching from the implant when the bar construction is integrated.

Enhanced gingival conditions for bar structures and resto rations with ball attachments. Reduction of the large number of components.

Phot

o: D

r. Bo

rrm

ann,

Kor

nwes

thei

m (D

E)

REF SKY-GF04

blueSKY SKY classic


6 mm

4 mm

2 mm

4 mm

31

blueSKY SKY classic

REF SKYEMG02

REF SKYEMG04

SKY esthetic gingiva former M size M 2



REF SKYEMG03

REF SKYELG02

REF SKYELG04

SKY esthetic gingiva former L size L 2



REF SKYELG03

REF SKYESG02

REF SKYESG04

SKY esthetic Gingivaformer S (narrowSKY) size S 2



REF SKYESG03

new


2 mm

4.3 mm

narrow platform regular platform


SKY aesthetic gingiva former

The SKY esthetic gingiva former ensures the optimum arrangement of the emergence profile for the later application of the SKY esthetic abutments.The SKY aesthetic gingiva former in size S with the narrow platform has the same diameter as the SKY esthetic abutments. Gingiva formers M and L have the regular platform.

Impr

essi

onM

odel

5.7 mm

4 mm

6.5 mm

2 mm

3 mm

4.5 mm

4 mm

4.5 mm

2 mm

5.2 mm

3 mm

5.7 mm

3 mm

7.2 mm

4 mm

7.2 mm


Prosthetics

Therapeutic concept… gapless…

Frequency of under-20 year olds in Germany. Source: KZBV 2008

Number of teeth with dental caries (DMF-T) in 12-year olds in Germany. Source: KZBV 2008

> 3.000 E

< 1.000 E

1.000 - 2.000 E

SOLUTIONS

The success of individual and group prophylaxis throughout the world will radically change the spectrum of treatment in dentists’ practices in the coming years. Young patients, who for various reasons suffer tooth loss, will mostly have healthy adjacent teeth, so that a conventional bridge is not indicated for ethical reasons.

Furthermore, the number of young patients in developed countries will decrease with demographic change. In Germany, the number of under-20 year olds will go down from 30 % in 1970 to 15 % in 2050.

With the increasing awareness for oral health, the demands placed on aesthetic and functional results in dental care will also increase. In this case, the provider is required to clarify and take the wishes and fears of the patient into consideration in the therapy plan before treatment begins, and to harmonise these with the financial possibilities available.

With just a few components, the SKY implant system offers a wide range of possibilities for the restoration of individual teeth and small tooth-bonded gaps. These extend from titanium abutments, to SKY esthetic abutments or even individual abutments prepared in the dental laboratory so that you can offer the right implant-supported solution for all needs.

Furthermore, the bredent group provides with the visio.lign veneers a possibility to fabricate high-quality and aesthetic restorations, using different kinds of crown base materials, which are also relatively reasonably priced.

Full-ceramic restoration with individual abutments and temporary restoration

visio.lign crown on NPM basis

Augmentative procedure + individual abutments

+ full ceramic

whiteSKY full ceramic

Metal-ceramic crowns

DMF-T0

7

6

5

4

3

2

1

01983 1987 1989 1992 1995 1997 2000 2004 2005

40

35

30

25

20

15

10

5

0

%

1950 1960 1970 1980 1990 2000 2010 2020 2030 2040 2050 2060

30,428,4 30,0

26,8

21,7 21,1 19,4 18,316,9 16,6 16,0 15,4

...gapless...

33

The ideal basis for temporary restorations.The demands patients make on implant restorations are constantly increasing. Owing to obligations in their jobs and social lives, numerous patients want to reduce the period of having a gap in their dentition. Temporary restora-tions are an attractive alternative to achieve this goal. These plastic abutments are also ideal for the modern concepts used in implantology, such as “progressive loading” or “immediate loading”.

Perfect contour of the gingiva thanks to three prefabricated designs. The extra-smooth surface avoids irritation of the gingiva. Simple and fast fabrication of temporaries.

SKY temp - as individual gingiva former

SKY temp is also the perfect basis for individual gingiva formers to fulfil high demands on red/white esthetics.

blueSKY SKY classic

7 mm

2 mm

4 mm

6 mm

3 mm

5.5 mm

5.3 mm

3.7 mm

7 mm

REF SKYTEMPS

REF SKYTEMPL

SKY temp Sincl. screw 2.2

SKY temp Mincl. screw 2.2

SKY temp Lincl. screw 2.2

REF SKYTEMPM

SKY temp

5.8 mm

3 mm

3.5 mm

REF SKYprovS

new


Material: POMTorque: 18 Ncm

SKY prov Sinc. screw 2.2

Perm

anen

t co

s-

met

ic r

esto

rati

on

SKY prov S

The new SKY prov S temporary abutments are manufactured from a High Per-formance Polymer (HPP) in the form of the SKY aesthetic abutments, in order to offer short and long-term temporary measures. These are also suited to use with narrowSKY implants due to the narrow platform.

Available from autumn 2013


Prosthetics

SKY Titanium abutments

R R

Wide-based SKY titanium abutments are ideal for supra-crest implants, as they form a relatively wide crown base at the gingival emergence. With the three available angulations

• 0° • 15° • 25°

all relevant clinical restorations can be covered. This is also supported by the R-abutments, where the torque is turned 30°, so that 12 prosthetic positions are provided with inclined abutments.

Choosing the correctly orientated abutment has been simplified by means of the SKY abutment selection set (page 15).

REF SKY-PO00

REF SKY-PO26

REF SKY-PO25

REF SKY-PO16

REF SKY-PO15

Abutment O° incl. screw 2.2

Abutment 15° incl. screw 2.2

Abutment 15° R incl. screw 2.2


Abutment 25° R incl. screw 2.2

blueSKY SKY classic

turned by 30°

R

R


10 m

m

turned by 30°

15°

10 m

m

25°

10 m

m

35

blueSKY SKY classic


REF SKYnES00

REF SKYnES16

REF SKYnES15

SKY esthetic Abutment S 0° (narrowSKY) incl. screw 2.2

SKY esthetic Abutment S 15° (narrowSKY) incl. screw 2.2

SKY esthetic Abutment S 15° R (narrowSKY) incl. screw 2.2

With implants which are positioned at bone level, SKY esthetic abutments offer optimum conditions to achieve excellent aesthetics. Thanks to the platform switch and the concave-conveax hybrid form, the soft tissue has sufficient space for it to attach accordingly. The edge of the crown can be placed very deeply so that optimum red-white aesthetics can be achieved.

R

REF SKY-EM00

REF SKY-EM16

REF SKY-EM15

REF SKY-EL00

SKY esthetic Abutment M 0° incl. screw 2.2

SKY esthetic Abutment L 0° incl. screw 2.2

SKY esthetic Abutment M 15° incl. screw 2.2

SKY esthetic Abutment M 15° R incl. screw 2.2

turned by 30°

new


R

R


SKY aesthetic abutments


Perm

anen

t co

s-

met

ic r

esto

rati

on

R

turned by 30°

R

6 m

m

5.5 mm

3 mm

7 mm

6 m

m

3 mm

6 m

m

4.5 mm

3 mm

15°

4.5 mm

6 m

m

3 mm

15°

5.5 mm

6.5

mm

3 mm


R


Prosthetics

SKY elegance abutment – White-Shade and Off-Peak

Off-Peak characteristic:

Maximum loading of the implant is reduced due to the cushion-ing effects of the High Performance Polymer, BioHPP. The abut-ment can be inserted as a temporary abutment immediately after the implant has been inserted, and does not subsequently need to be removed. The attached gingiva in the sulcus is not dis-turbed – the optimum basis for long-term bone preservation.

The individual design options and white color of BioHPP provide perfect preconditions for esthetic reconstructions. Using con-ventional dental methods, esthetic, individual abutments can be molded and pressed quickly and safely in the for 2 press unit. The low investment costs of the for 2 press unit and the familiar processing steps enable the use in every laboratory. Moreover, prefabricated abutments in the design of the SKY es-thetic line will be available from autumn 2013. These abutments can be easily modified by the user in accordance with the gin-gival line.

All types of crown and bridge restorations can be placed on the individual and the prefabricated abutments, from BioHPP res-torations with veneers from the visio.lign veneering system to ceramic bridges and crowns. The Off-Peack characteristics of BioHPP enable the fabrication of reliable and durable restora-tions for the entire range of indications mentioned above; such restorations offer patients superior comfort since stress is re-duced considerably during chewing.

Photo: Labor Schwindt, Landau (DE) Photo: Dr. Lerner, Baden-Baden (DE)

t [S]

F [N

]

Titanium abutments

SKY elegance Abutment

37

blueSKY SKY classic


new

REF SKYETB00

REF SKYEES00

REF SKYEEM00

SKY elegance S Abutment incl. screw 2.2

SKY elegance M Abutment incl. screw 2.2

REF SKYEES15

SKY elegance S 15° Abutment incl. screw 2.2

5.5 mm

3.5 mm

9.4

mm

SKY elegance individual abutments

SKY elegance titanium base SKY elegance individual abutments

Using standard dental procedures, the perfect design of the individual abut-ment can be fabricated on the SKY elegance titanium base in just a few minutes. The SKY esthetic titanium base can be used on narrowSKY as well as blueSKY and SKY classic with plat-form switch.The abutment is then fabricated in the for 2 press unit.

SKY elegance prefabricated abut-ments

The prefabricated BioHPP abutments, which can be customized easily and quickly, provide new options for res-torations. These abutments can be simply and quickly adapted to the gingival line in the mouth using diamond instru-ments.


Perm

anen

t co

s-m

etic

res

tora

tion

3.5 mm

9.4

mm

7 mm

9.4

mm

3.5 mm

5.5 mm

REF SKYEEM15

SKY elegance M 15° Abutment incl. screw 2.2


REF SKYEEM15

REF SKYEEL00

SKY elegance L Abutment incl. screw 2.2

9.4

mm

4.5 mm

3.5 mm

4.0

5.8

mm

3.0 mm

3.5 mm


Prosthetics

REF SKY-PS22

REF SKY-PV00

Abutment, cast-on incl. plastic coping and screw 2.4

Screw 2.46 pieces With cast-on abutments, difficult individual clinical situations can

also be easily handled from a prosthetic point of view.

This is held securely on the metal base by the screw connection to the sleeve, so that modellation of the individual abutment can be made quickly and safely. The burn-out plastic sleeve is provided already mounted.

Technical data: Melting interval 1400 - 1490 °C WAK (thermal expansion coefficient) 11.9 – 12.2 10-6K-1 (Au 60 %, Pd 20 %, Pt 19 %, Ir 1%) Weight: 0.33 gTorque: 25 Ncm

blueSKY SKY classic

Photo: Dr. Vogel, Neu-Isenburg (DE)

Cast-on abutments

9,5

mm

3.5 mm

39

Abutment, cast-on incl. plastic coping and screw 2.4

Fast and simple fabrication of labo-ratory-made individual abutments. Thanks to 1° cone, all surfaces are easy to scan and mill. Modelling the individual abutment with compoForm UV and SERACOLL UV.

Can be used with all CAD/CAM sys-tems, copy milling units and casting techniques. Individual abutments made of zirconiumdioxide and titanium can be fabricated.

REF SKYUFA00

SKY uni.fit Abutment incl. screw 2.2

SKY uni.fit Abutment

blueSKY SKY classic

Photo: Dr. Alius, Nürnberg (DE)

Perm

anen

t co

s-m

etic

res

tora

tion


10.2

mm

4.2

mm


3.5 mm

13 m

m12

mm

5.7 mm

12 m

m

4.5mm

8 m

m

3.5 mm

SKY uni.coneScan cap intraoral / extraoral1 piece

REF SKYUSCIE

new

narrowSKY blueSKY SKY classic

Prosthetics

SKY uni.fit Scan Abutment

SKY uni.fit Scan-Abutmentextraoral

REF SKYUSCAE

Three-point referencing

Position, location and axial orientation of the implant in the virtual model are determined by means of three-point referencing.

SKY fast & fixed Scan cap intraoral / extraoral

REF SKYFSCIE

SKY uni.fit Scan-Abutment intraoral1 piece

REF SKYUSCAI

Extra-oral:The position of the implant on the model is safely and reliably scanned extra-orally using three-point referencing.

Material: PEEKTorque: 10 Ncm

Material: PEEKTorque: 10 Ncm

Intra-oral:The CAD software recognizes the associa-tion of implant location and position using record identification.

41

new

narrowSKY blueSKY SKY classic

The SKY uni.fit CAD Abutment is particularly suitable for CAD/CAM design and fabrication of individual abut-ments made of zirconia. The individual abutment is luted to the prefabricated adhesive base in the laboratory.

Small design with maximum adhesive surface for reliable long-term bonding. Parallel-walled with optimized radii to ensure perfect milling in CAM systems.

REF SKYUFCAD

SKY uni.fit CAD Abutment

Space for excess adhesive

REF SKYUFA35

SKY uni.fit CAD Abutment 3.5

Uniformadhesive gap

Non-uniform adhesive gap

Rotation stop on two sides results in a uniform adhesive gap.

Rotation stop on one side results in a non-uniform adhesive gap.

Perm

anen

t co

s-m

etic

res

tora

tion

SKY uni.fit CAD abutment



Important:The SKY uni.fit scan abutments and SKY uni.fit CAD abutment will be available from the libraries of the following CAD/CAM systems from spring 2013:

• exocad • Dental Wings• 3 shape

10 m

m

4 mm

4.5

mm


Prosthetics

SKY Zirconium abutments

REF SKYZA000

SKY zirconium abutment 0° with screw 2,2

REF SKYZA150

SKY zirconium abutment 15° with screw 2,2

REF SKYZA15R

SKY zirconium abutment 15° R with screw 2,2

REF SKYZA00R

SKY zirconium abutment 0° R with screw 2,2

Clinical experience with the SKY uni.fit abutment has shown that the bonded joint in the dental laboratory functions very well. Thus, the SKY zirconium abutments have been further developed according to the same concept.

• A prefabricated zirconium abutment is bonded to a titanium base• The form of the zirconium abutment is based on the SKY esthetic Line, however, it has a vestibular sunken shoulder, in order to avoid extensive etching of the zirconium. Costly grinding of the zirconium is eliminated. • The titanium bonding base is also available as a 30° swivelled Torx–R version

so that 12 positions are available for prosthetic restorations. The R-version is marked yellow.

• The bonding base has a reduced platform diameter so that a platform switch results, whereby aesthetic results in narrow gaps and narrow implants are improved.

• Dentine materials are colored.

Important:The SKY zirconium abutments must not be subjected to grinding as the minimum wall thickness is required in order to guarantee long-term stability.

RR

Material: Titanium + ZiO2Torque: 25 Ncm

blueSKY SKY classic

R

R

RR

9.1

mm

9.1

mm

9.1

mm

9.1

mm

5.5 mm

3.8 mm

43

Therapeutic concept... tempting...

Patients who are about to lose all their teeth are a highly interesting customer group for any dental practice. As various scientific studies have shown, these patients are very dissatisfied with their oral health. They often have either a strongly reduced residual dentition, or have severe periodontal damage to the teeth.

Periodontosis is the new widespread disease with a dramatic growth rate in the last few years, which mainly affects patients in the 40 to 60-year old age group, who are in the prime of life.

The incidence of patients with strongly reduced residual dentition is wide-spread. In Germany, the generation “50 plus” has only 4 to 5 teeth per jaw on average and is already edentulous at 64.

These patients are very afraid of losing all their teeth. On the one hand, they still feel quite young, on the other hand, a removable prosthesis means “You are old!”; for this reason, even implant-supported removable prostheses do not meet all patient needs – they want a snug-fitting restoration right from the start, if at all possible.

With SKY fast & fixed, you are certain to be able to satisfy these wishes. Extraction, implantation and provisional restoration with an immediately stable bridge are performed in one day.

This means that patients will no longer have to be without any teeth, even for just a day, and they will always have a secure restoration in their mouth. Psychologically, this is very important. With the provisional restoration, patients already feel a definite improvement in their oral situation and are then often prepared to spend more money for the definitive restoration. These patients are also very pleased to further recommend this form of treatment by word of mouth.

Through the reduced number of implants and the avoidance of augmentation in conjunction with a high degree of standardisation of procedures, both in dental practice and laboratory, SKY fast & fixed is a therapy concept, which, on the one hand, is financially accessible for very many patients and, on the other hand, generates a high contribution per practice hour for both practice and laboratory.

Number of natural teeth.

8

OHIP-value

28,5

7

6

5

4

3

2

1

022,5 18,5 12,5 4,5

Source: Steele et al.: How do age and tooth loss affect oral health - impacts and quality of life? A study comparing two national samples.

> 30.000 E

< 5.000 E

10.000 - 20.000 E

Edentulous jaw with intensive augmentative measures

Incl. definitive restoration

Removable solutions

SOLUTIONS

SKY

fast

& fi

xed

REF 992 9710 D

BookImmediate restoration with reduced number of implants Authors:Dr. Georg BayerDr. Frank KistlerDr. Steffen KistlerStephan AdlerDr. Jörg Neugebauer


Prosthetics

SKY fast & fixed – the prosthetic solution for every occasion

Allow yourself prosthetic freedomThe new SKY fast & fixed abutments with horizontal circumferential groove gives you all the options for your screw-retained prosthetic restoration:

• Occlusal or transversal screw retention with just one abutment. For example, the long-term temporary restoration can firstly be screwed from the occlusal and then the definitive restoration from the transversal direction. The new SKY fast & fixed abutment offers you unlimited flexibility. • Perfectly suited for the following substructure materials: titanium, NPM, gold, zirconium oxide and BioHPP.• Passive fit is always achieved, regardless of the material, as the substructure is bonded in situ.

Self-centering transversal screw retentionTransversal screw retention is a bolting principle. The thread for the bolt screw is located in the bridge framework. The bolt screw (A) and the cylindrical surfaces (B and C) form a compact unit. The prosthetic coping is fixed by triple point attachment with the bolt screw (A) and the short cylindrical surfaces (B and C) to avoid tilting. At the same time, the short cylindrical surfaces ensure that the coping is self-centered (passive fit) when it is placed on. Thanks to the slightly inclined position of the bolt screw, the prosthetic coping is pressed on the abutment platform and gap formation is avoided when it is tightened.

Simple applicationA click that can be easily heard and felt indicates reliable fit when the framework is attached or removed. Reliable retention thanks to passive fit. The design enables the user to remove and reposition the restoration without removing the bolt screw from the framework, which significantly reduces the risk of swallowing the bolt screws. The design also guarantees fast and simple removal and insertion of the restoration.

35°17,5°0°

A

B

C

45

SKY

fast

& fi

xed

Improved prosthetic copingsWithin the scope of our ongoing market analysis, we have optimized the prosthetic copings. In the cervical area they have a short cylindrical section with an index to be used as the basis for the temporary restoration. When fabricating the definitive restoration, the cylindrical section can be easily customized to achieve better aesthetic results.

Improved SKY fast & fixed laboratory analogThe SKY fast & fixed laboratory analog has the same coronal form as the SKY fast & fixed abutments, so that once again we have been able to significantly simplify impression and model manufacturing. The SKY fast & fixed laboratory analog can now set a bone more simply and securely, even when the impression material protrudes over the abutment margin.

New heights – straight abutmentsThe straight SKY fast & fixed abutments are now available in gingiva heights of 1, 2, and 4 mm. This enables dentists to fabricate restorations with a consistent quality and patients will receive top-quality restorations.

1 2 4


Prosthetics

SKY fast & fixed

SKY f & f Angulation aid set 35°

SKY f & f Prosthetic copingResin burn-out

SKY f & f Prosthetic coping HSL cast-on

Technical data: Melting interval 1770 - 1800 °C WAK (thermal expansion coefficient) 9 10-6K-1 Material: Pt 90 % / Ir 10 % Weight: 0,59 g

SKY f & f prosthetic coping, titanium with screw M 1.4,Silicone tubing 1 piece each

REF SKYFFPKT

blueSKY

SKY f & f Abutment 0° height 1 mm with integrated screw1 piece each

REF SKYFT001

2 mm

SKY f & f Abutment 0° height 2 mm with integrated screw1 piece each

REF SKYFT002

4 mm

SKY f & f Abutment 0° height 4 mm with integrated screw 1 piece each

REF SKYFT004

Screw M 1.4 6 pieces

REF SKYFFSPK

blueSKY SKY classic

12.4

mm

5.65 mm

25 m

m

3.7 mm

1 mm

5.65 mm

REF SKYFFS35

REF SKYFFPKK REF SKYFFPKH

SKY fast & fixed abutmentsThe SKY fast & fixed titanium prosthetic coping provides the basis for the fast and secure restoration of temporary bridges, which are occlusal screw-retained using SKY fast & fixed abutments. The one-piece straight abutment is screwed directly in the implant and is now available in gingiva heights of 1, 2, and 4 mm. All abutments have the same cone, which can reconcile divergences of +/- 10°.

12.4

mm

5.65 mm

12.4

mm

5.65 mm

47

SKY f & f Prosthetic coping transversal screw-retained

Screw driver longAllen 0.9

SKY f & f laboratory analog

SKY f & f impression copingClosed tray with integrated screw10

.3 m

m

SKY f & f Impression coping open tray

11 m

m

5.65 mm

SKY f & f Gingiva former

6 m

m

5.65 mm

blueSKY

SKY f & f Abutment 17,5° height 5 mm with screw 2.2 1 piece each

blueSKY

3.7 mm

5 mm

SKY f & f Abutment 35° height 5 mm with screw 2.2 1 piece each

SKY f & f Abutment 35° height 4 mm with screw 2.2 1 piece each

3.7 mm

4 mm

3.7 mm

5 mm

3.7 mm

3 mm

blueSKY SKY classic

5.7 mm

6.1

mm

5.1

mm

5.65 mm 5.65 mm

Screw driver Allen 0.9 for transversal screw retention* SK

Y fa

st &

fixe

d

REF SKYFF0AK REF SKYFFAOL REF SKYFFGF2

REF SKYFFTLA

REF SKYFTPKS REF 310 0010 6 REF 310W0106

REF SKYFT173 REF SKYFT175 REF SKYFT354 REF SKYFT355

SKY f & f Abutment 17,5° height 3 mm with screw 2.2 1 piece each



new

Prosthetics

SKY uni.cone abutment system

In addition to the SKY fast & fixed abutment system, we now also offer the SKY uni.cone system with a reduced diameter of 4.5 mm, so that now high-quality esthetic restorations - both occlusal and vertical screw retention types - can also be easily and quickly fabricated and used for atrophied jaws.

The SKY uni.cone abutment system is copper-color anodized for better distinction in the patient's mouh and in the laboratory.

A typical application for SKY uni.cone is the combination with SKY fast & fixed in the lower jaw. Implants placed at an angle are attached to the normal SKY fast & fixed abutments and the SKY uni.cone abutments are placed on the straight abutments in the corresponding height.

49


new

SKY uni.cone Prosthetic coping transversal screw-retained

Screw driver longAllen 0.9

SKY uni.cone laboratory analog

SKY uni.cone impression copingClosed tray with integrated screw

SKY uni.cone Impression coping open tray

SKY uni.cone Gingiva former

Screw M 1,4 6 pices

SKY uni.cone Prosthetic coping, resin 1 piece each

SKY uni.cone Prosthetic coping HSL cast-on1 piece each

Technical data: Melting interval 1770 - 1800 °C WAK (thermal expansion coefficient) 9 10-6K-1 Material: Pt 90 % / Ir 10 % Weight: 0,59 g

SKY uni.cone Prosthetic coping, titanium 1 piece eachSilicone tubing

REF SKYUCPKT

blueSKY

SKY uni.cone Abutment 0° height 1 mm

REF SKYUC001


REF SKYUC002


REF SKYUC003

narrowSKY SKY classic

Screw driver Allen 0.9 for transversal screw retention*


REF SKYUCAGL REF SKYUCAOL REF SKYUCGF2

REF SKYUCTLA REF SKYFFSPK

REF SKYUCPKS REF 310 0010 6 REF 310W0106

REF SKYUCPKK REF SKYUCPKHRe

mov

able

4.5 mm

5 mm

3,7 mm

1 mm 2 mm 3 mm

11 m

m

4.5 mm

12.4

mm

4.5 mm

12.4

mm

4.5 mm

12.4

mm

4.5 mm

10.3

mm

6 m

m

4.5 mm


Prosthetics

SKY fast & fixed

Quelle: Steele et al.: How do age and tooth loss affect oral health impacts and quality of life? A study comparing two national samples.

OHIP = Oral Health Impact Profile stands for: physical handicap, psychological handicap (beauty), social handicap (high value - big problem).

Source: Federal Office for Statistics. Source: Dissertation Dr. Saal Hamburg

Study of 1,224 corpses > 60 years of age in Hamburg, Germany

One would actually expect that most people will become increasingly dissatisfied with their oral situation with a decreasing number of teeth and increasing age. This is not the case, however, as has been demonstrated by the OHIP value, whereby increasing satisfaction has been shown with increasing age. This result is explained in the scientific literature by the fact that in addition to becoming gradually accustomed to an inadequate oral situation, resignation also occurs to a large degree, as dental measures often only have a short-window of success, as the strongly decreasing frequency of consultations to dental practices has also confirmed. In addition, senior citizens frequently have considerably more serious diseases to contend with, such as e.g. cardiovascular disease, diabetes, etc. which is highlighted by the increased frequency of visits to the doctor.

A study of oral health by Dr. Saal in Hamburg on 1,024 corpses at the crematorium brought the alarming result that only 37% of the deceased possessed a good oral state of health, but that 63% had died with a poor or even desolate state of restorations. Incidentally, only 1.3% of the dead persons had implants.

The prosthesis could, however, be stabilised and fixed in older edentulous patients by a few implants and the corresponding retaining elements, such as e.g. locator, stud-head or bar. In patients, who have been edentulous for a longer time, a lot can also be achieved using mini-implants without much surgical effort.

The difficulty with these patients lies in addressing them. On the one hand, they come more seldom to the practice and, on the other hand, it is necessary to convince them that it still pays for them to invest in their oral health and to bring them out of their resignation. A lot can also be achieved by speaking to both the children and the grandchildren. The positive effects on the general state of health, which is brought about by better nutrition and is made possible with a fixed prosthesis, should be particularly emphasized. In this circle of customers, however, recommendation plays a considerable role, as senior citizens like to talk about their health. A successfully treated patient can lead to many more new patients.

Age (years)

8

OHIP-value

<30

7

6

5

4

3

2

1

030-49 50-69 70+

9

40

50

60

70

80

90

100

0-14 15-24 25-34 35-44 45-54 55-64 65-74 75+Age (years)

Consultation rate (%)

Physicians

Dentists

desolate 27 %

poor 36 %

good 37 %

...in the thick of it...

51

Metal housing with O-ring

fixation of restorations

Indication

Based on the gingiva former, the patrix is screwed in after replacing the screw. Various matrix systems are available:

• SKY metal housing with O-ring• SKY precious metal matrix

Improved soft tissue situation thanks to the use of the gingiva former - heal-ing process is not affected. Individually adjustable resilience according to the patient‘s needs. Inserts can be easily exchanged.

REF SKY-KA04

REF SKY-KA02

REF SKY-KA00

REF SKY-OR55REF SKY-OR50

Ball attachment directly screwed height 0 mm

Ball attachment height 2 mm

Ball attachment height 4 mm

O-rings6 pieces

REF SKYGM225

SKY precious metal matrix

REF SKYGMAKT

SKY precious metal matrix activator

REF SKYGMDEA

SKY precious metal matrix deactivator

blueSKY SKY classic

Rem

ovab

le

Ball attachments

3.6 mm

2.25 mm

2 mm

2.25 mm

4 mm

2.25 mm

5.2

mm

2.5 mm

3 mm

3.25 mm


Due to its low structural height, the SKY Locator® offers excellent possibilities for fixing prostheses in many cases.

With the built-in platform switch, the soft tissue has optimum conditions for successful attachment.

The 3 gingival heights of 2, 4, and 6 mm cover all of the relevant clinical situations.

REF LOCLAB10

SKY Locator® Processing set 0°-10°, 2 pieces

SKY Locator® Processing set10°-20°, 2 pieces

REF LOCLAB20

REF LOCZAB02

REF LOCZAB06

SKY Locator® AbutmentGingiva height 4 mm


REF LOCZAB04


Photos: Dr. Alius, Nürnberg (DE)

Prosthetics

SKY Locator®

Material: Titanium TiN-coatedTorque: 25 Ncm

blueSKY SKY classic

Qu-resin rosa Assortment 14 pieces 1 cartridge 50 ml 1 Qu-connector 10 ml12 mixing cannulas, size 1, blue

REF 540 0116 1

3.9 mm

2 mm

4 mm

6 mm

53

Dr. I

doux

, Hoe

rth,

(FR)

SKY Locator® angled

blueSKY SKY classic

new

REF LOCAB172

REF LOCAB352

Rem

ovab

le

SKY Locator®Abutment 17.5° Height 2 mm

SKY Locator®Abutment 35°Height 2 mm

The original Locator® on an angled SKY base opens up new prosthetic horizons. The two-component design corrects the insertion direction: • Locator® base 17.5°• Locator® base 35°

The Locator® coping is the same for both products. Furthermore, the prostheses can now have better

posterior support.

All Locator® retention elements can be used.

In many cases the implants, particularly in the upper jaw, can only be placed at angles or acute angles. The insertion path now can be adjusted simply and quickly with the angled SKY Locator®. First the angled Locator® base is screwed in and then the Locator® coping is placed on to obtain the correct path. As usual, all Locator® retention elements can be used to enable simle and safe insertion and removel of the denture by the patient.


2 mm

3.9 mm

3.8 mm


SKY Locator®Angular insertion instrument, 1 pieces

REF LOCZWED6

REF LOCZINST

SKY Locator® Instrument 1 pieces

Impression coping4 pieces

Laboratory analog4 pieces

Blocking out ring20 pieces

Processing insertblack4 pieces

Angular measuring abutment, 4 pieces

Angular measuring gauge, 1 pieces

Retention insert blue, 6.7 N, 680 g 4 pieces

Retention insertpink, 13.4 N, 1365 g4 pieces

Retention inserttransparent, 22.3 N, 2270 g 4 pieces

Retention insertred, 6.7 N, 680 g4 pieces

Retention insertorange, 9.1 N, 907 g 4 pieces

Retention insertgreen, 17.8 N, 1815 g 4 pieces

blueSKY SKY classic

Prosthetics

Accessories SKY Locator®

REF LOCZAK40

REF LOCZLA40

REF LOCblock

REF LOCZVA11

REF LOCZWIMP

REF LOCZWIML

REF LOCR1006

REF LOCR1013

REF LOCR1022

REF LOCR2006

REF LOCR2009

REF LOCR2018

55

SKY Steg Abutment

Based on the titanium gingiva formers, three abutments are available for the fabrication of the bars:

• burn-out base • cast-on HL base• titanium base

Improved soft tissue situation thanks to the use of the gingiva former - healing process is not affected. High flexibility when selecting materials. Fewer components, hence more ef-ficient.

bars

Indication

REF SKY-SH11

REF SKY-ST11

REF SKY-SK11

REF SKY-SB06

REF SKY-SB04

Bar abutment, titanium

Bar abutment, burn-out plastic

Bar abutment, HL

REF SKY-SB02

Bar base, height 2 mmincl. screw 2.4



REF SKY-DA77

Spacer analog incl. screw 2.4

5 m

m

4.3 mm

0.7 mm

5 m

m

Technical data: Melting interval 1400 - 1490 °C WAK (thermal expansion coefficient) 11,9 - 12,2 10-6K-1

(Au 60 %, Pd 20 %, Pt 19 %, Ir 1 %) Weight: 0,63 g

blueSKY SKY classic

Rem

ovab

le



Prosthetics

Screws

REF SKY-PS22

REF SKYFFSPK

REF SKY-DS02

REF SKY-DS04

REF SKY-DS08

REF SKY-PS18

REF SKYAPS18

REF SKYLPS22

REF SKYFFLPK

blueSKY SKY classic

25000

20000

15000

10000

5000

0

REF SKY-DA77

Spacer analog incl. screw 2.4

Findings

Pre-

stre

ss [

cN]

[Time] 1 x screw fixation 5 x screw fixations 10 x screw fixations

In two posters presented at the SKY Meeting 2012, Dr. Wentaschek from the University of Mainz illustrated how Pretension can be significantly reduced by repeatedly tightening the screw. Pretension is the decisive crucial factor for the implant-abutment connection. He therefore rec-ommends the use of different screws in the laboratory and the clinic to avoid screw loosening.

SKY prosthetic screw 2.2blue, 6 pieces

SKY fast & fixed and uni.conescrew M 1.4 for prosthetic coping6 pieces

REF SKY-DS02

SKY adjustment screw 2 mm 3 pieces

REF SKY-DS04


REF SKY-DS08


REF SKY-PS18

SKY impression screw closed trays

REF SKYAPS18

SKY aesthetic impression screw, open trays, short

Clinical screws

These results can be transferred to the recall. In this case, we recom-mend replacement of the screws when the abutment is removed for cleaning.

SKY lab screw PS22 grey, 10 pieces

Laboratory screws

SKY fast & fixed and uni.conelab screw M1.4grey, 10 pieces

Repeatedly tightening the screws reduces preten-sion by up to 40 %.

57

SKY prosthetic assortment

Content:

The following components can also be selected

The torque ratchet in the SKY prosthetic case for practices ensures that all prosthetic components of the SKY system can be tightened per- manently and reliably. The case contains two screwdrivers - short and long - for fixation of all abutments as well as the screwdriver for the SKY ball head attachments. The SKY adapter, included in the assortment, is required for use with the SKY Locator®screwdrivers and for transversal screw retention .

new

REF SKYPET10

SKY prosthetic assortment practice

REF SKY-SD50

SKY torque ratchet

REF SKY-SD16

SKY prosthetic key short

REF SKY-SD25

SKY prosthetic key long

REF SKY-SD21

SKY prosthetic key for ball head attachments

REF SKYADAP6

SKY adapter, instruments for contra-angles

REF 310W0106

Screwdriver, Alle screw 0.9 for transversal screw-retention

REF SKY-SD65

Key holder

The long laboratory handle contained in the SKY prosthetic case for laboratories enables perfect handling and use of the screws on the master models. Appropriate latch-grip screwdrivers are securely held in the adapter for contra-angles and can be exchanged easily. As a result, the SKY abutment screws of the SKY Locator® and the transversal screw can be easily fastened and unfastened. The screwdriver for the SKY ball head attachment is located at the other end of the laboratory handle.

REF SKYPET20

SKY prosthetic assortment laboratories

Content:

REF SKY-SD80

SKY laboratory handle

REF SKY-SD22

SKY prosthetic key for contra-angles

REF LOCZWED6

SKY Locator® mounter for contra-angles

REF 310W0106

Screwdriver, Allen screw 0.9 for transversal screw retention

Practice Laboratories

Inst

rum

ents

Tool

s


SKY TK mounter for ratchetshort

SKY TK mounter for contra-angleshort

REF SKY-STK6

REF SKY-STK5

REF SKY-WTK6

REF SKY-WTK5

REF SKY-SD25

REF SKY-SD16

REF SKY-SD21

REF SKY-SD22

REF SKY-PI22M = 1:1

REF mSKYXWM6miniSKY insertion instrument, contra-angleshort

Parallel indicator with conical and cylindrical side, thicker central area with hole for protection against accidental dropping

SKY prosthetic key for contra-angle short

SKY prosthetic key for ball abutments

SKY prosthetic key short

SKY prosthetic key long

REF SKY-SD28SKY prosthetic key for contra-anglelong

REF mSKYXWM7

SKY TK mounter for ratchetlong

SKY TK mounter for contra-anglelong

miniSKY insertion instrument, contra-anglelong

Tools for ratchet and contra-angle

Accessories

REF SKYADAP6Adapter

REF LOCZWED6SKY Locator® mounter for contra-angle

59

Key holder The useful and compact holding tool for all prosthetic instruments.

Surgical ratchetFinger key with ratchet function and attachable, movable handle. Can be directly attached onto the Star-Driver.

REF SKY-SD40

REF SKY-SD80

REF SKY-SD50Torque ratchet Adjustable from 10 to 30 Ncm. Is directly attached onto the key.

Universal forcepsThe universal forceps with titanium-coated gripping surface to hold implants and abutments, also suitable to hold prosthetic keys.

REF SKY-SD60

REF SKY-SD65

M = 1:2

Laboratory handle incl. SD-22 High-grip tool for the laboratory. One working end for contra-angle instruments or square tap. The other end corresponds to SD-21 for screwing in ball abutments.

REF LOCZINSTSKY Locator® Instrument

Instruments

Inst

rum

ents

Tool

s

OPG-ruler REF 580 0127 6

blueSKY / narrowSKY X-ray-tamplates

Scale 1:1

Scale 1,12:1

Scale 1,26:1

REF bSKYMS01

REF bSKYMS12

REF bSKYMS26

SKY classic X-ray-tamplates

Scale 1:1

Scale 1,12:1

Scale 1,26:1

REF kSKYMS01

REF kSKYMS12

REF kSKYMS26

Maßstab / scale 1 : 1

Maßstab / scale 1,12 :1

Maßstab / scale 1,12:1

3510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

REF

bSKY

MS0

14514 4512 4510 4508

bredent medical GmbH & Co.KG

Weissenhorner Str. 2 | 89250 Senden | Germany

Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35

www.bredent-medical.com | e-mail [email protected]

REF bSKYMS12

3510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

4514 4512 4510 4508



Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35


Ø 5 mm

Ø 5 mm

Maßstab / scale 1:1

5508 5510 5512

5512 5510 5508

Maßstab / scale 1,26 : 13510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

REF

bSKY

MS2

6



Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35



5508 5510 5512

Ø 5 mm

Maßstab / scale 1,12 : 13510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

REF

bSKY

MS1

2

4514 4512 4510 4508



Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35


Ø 5 mm


5508 5510 5512

5512 5510 5508

01

23

01

23

01

23

Maßstab / scale 1 : 1


REF

bSKY

MS0

1

Ø 5 mm

REF

bSKY

MS2

6

Ø 5 mm

REF

bSKY

MS1

2

Ø 5 mm

Maßstab / scale 1,12 : 1


Maßstab / scale 1,26 : 1

3510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

4514 4512 4510 4508

3510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

4514 4512 4510 4508


3510 3512 3514 3516

4008 4010 4012 4014 4016

4508 4510 4512 4514

3516 3514 3512 3510

4016 4014 4012 4010 4008

4514 4512 4510 4508



Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35




Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35




Tel. (+49) 0 73 09 / 8 72-6 00 | Fax (+49) 0 73 09 / 8 72-6 35


classic

classic

classic

01

23

01

23

01

23

REF

kSKY

MS0

1

Ø 5 mm

REF

kSKY

MS2

6

Ø 5 mm

REF

kSKY

MS1

2

Ø 5 mm


Technical specifications

Recommendations for SKY screws

SKY cover screw 25 rpm 10 Ncm

SKY impression abutments 25 rpm 10 Ncm

SKY gingiva former 25 rpm 10 Ncm

SKY temp / SKY prov S 25 rpm 18 Ncm

SKY abutments 25 rpm 25 Ncm

SKY fast & fixed 25 rpm 18 NcmSKY uni.coneProsthetic screw

Presentation of the system

miniSKY Implant System

61

mini


Use miniSKY implants to ensure reliable fixation of the denture and improve the quality of life of your older patients who lost their teeth quite some time ago.

All clinical studies 1 and tests have shown that inadequate fit of restorations reduces the quality of life of patients considerably.

Persons at the age of 70 or older have been edentulous over numerous years and, as a result, the ridge has become very narrow and placement of stan-dard implants always requires complex surgical procedures, such as bone splinting, etc. Moreover, frequently the general state of health of these patients does not permit major surgical treatment. The diameter-reduced miniSKY implants are perfectly suited for these patients since they allow minimally invasive placement. In numerous cases not more than a small incision to control the bone width is required.

The soft line denture worn during the healing phase enables the patient to enjoy enhanced retention of the denture.

At the end of treatment, the happy patient is able to eat, speak and enjoy life without any limitations.

The use of diameter-reduced implants is strongly recommended for certain indications.

With miniSKY we offer you an implant system that is perfectly matched to these indications and results in better quality of life for your patients with just a few components, a modern surface and an advanced and simple prosthetic concept.

miniSKY can be used as a one-piece implant with ball head or as a two-piece implant as well.

The mini2SKY offers a choice of Ø 2.8 and 3.2.

Quality of life in later years

Atraumatic insertion and permanent primary stability make the miniSKY implants ideal for splinting the whiteSKY im-plants during osseointegration to avoid any micromovement in free-end situations. In most cases, our patients are willing to accept the temporary titanium implant.

Splinting is done using composite layered on glass fiber bands and can be compared to a plaster cast.

Temporary implant

Photos: Dr. Siewert, Clinica Somosaguas, Madrid

1 Literature: Müller, Frauke / Nitschke, Ina: Der alte Patient in der zahnärztlichen Praxis Quintessenz Verlags-GmbH, Berlin 1. Auflage 2010. Steele et al.: How do age and tooth loss affect oral health impacts and quality of life? A study comparing two national samples.Millwood and Heath: Food choice by older people. Gerodontology 2000.

miniSKY

The solution for badly atrophied jaws and an improved quality of life

mini1 mini2

miniSKY

63

The mini1SKY and mini2SKY Implantate feature the proven osseo connect surface (ocs®) of the blueSKY implants to ensure fast and reliable osseointegration. The SEM photos show the uniformly rough surface which provides ideal preconditions for the apposition of osteoblasts, which is supported by the exceptional hydrophilic properties of the implants.

miniSKY MD abutments with automatic divergence compensation MD = multi divergent

Divergence compensationby shortening the abutments

• The enclosed prosthetic cap facilitates modelling of the restoration • Utmost precision of stress- free bonding in situ

Transgingival difference

mini1SKY• Penetration profile through gingiva at the implant

mini2SKY • Penetration profile through gingiva at the abutment

Three-step functional design

• Cortical relief• Central stabilization• Special tip

• Platform diameter 3,2 mm • External thread 2,8 mm and 3,5 mm • Self-tapping thread • Titanium grade IV, cold-formed • Double thread

miniSKY diameter-reduced implants

osseo connect surface (ocs®)

miniSKY - Technical data

min

iSKY

miniSKY overview

20 µm

100 µm

mini

3.2 mm

2.8 mm

3.2 mm

3.5 mm


mini1SKY

2.8

REF m1SKYL06Length 6 mm




mini2SKY

2.8




3.2

REF m2SK3208Length 8 mm




The mini²SKY gingivaformer is used during healing time.Therefore a cover screw is not included in the scope of delivery.

miniSKY overview

65

OP-Tray with drills and instruments

REF MSKYOT41

D3- D4

D1- D4

Pilot drillSKY-DP06/SKY-DP08800–1000 rpm/min

D1

100 % implant length

Twist-Drill 2.25SKYDT23K/SKYDT23L800–1000 rpm/min

D22/3 implant length

Twist-Drill 2.25SKYDT23K/SKYDT23L 800–1000 rpm/min

Twist-Drill 1.3SKYDT13L800–1000 rpm/min


D1- D4

D4

D1


SKY DrillSKYD1235300 rpm/min

D2-D3 100 %

implant length

SKY DrillSKYD3435300 rpm/min

2.8 3.2

Surgical protocol

OP-Tray miniSKY

min

iSKY

The new miniSKY OP tray, OT 41, contains all of the drills and instruments needed for inserting the miniSKY implants.

All of the instruments can be easily assig-ned and identified by means of the images and order numbers.

It is small enough to fit onto any operating table, and is of course easy to clean and sterilize.

With bone quality D3-D4, the drilling process is com-pleted using twist drill 1.3

With bone quality D4, the drilling process is completed using twist drill 2.25

mini

mini2

mini1

mini2

mini


REF SKYDT13L 1.3

REF SKYDT23L 2.25 long

REF SKYD1235 3.5

REF SKYD3435 3.5

Twist-Drill rpm/min. 800-1.000 Drill for hard bone rpm/min. 300

L6 L8 L10 L12 L14

SKYXST06 SKYXST08 SKYXST10 SKYXST12 SKYXST14

SKYS0840 SKYS1040 SKYS1240 SKYS1440–

Twist-Drill

Drill4,0

3,5

REF

REF

REF SKY-DV12

SKY Drill extension

REF mSKYMS01

REF mSKYMS12

REF mSKYMS26

M = 1:1

M = 1,12:1

M = 1,26:1REF SKY-SD25

SKY Prosthetic key long

REF mSKYXWM6

miniSKY Mounter for contra-angleshort

REF mSKYXWM7

miniSKY insertion instrument, contra-anglelong

REF SKYADAP6

Adapter

REF SKY-SD50

Torque ratchet Adjustable from 10 – 40 Ncm. Is directly attached onto the key.

Surgical and prosthetic instruments

Drills, drill stops, and tools


6 mm10 mm 12 mm 14 mm

6 mm10 mm

12 mm14 mm

10 mm 12 mm 14 mm

10 mm12 mm

14 mm

mini



Tel. (+49) 0 73 09/8 72-6 00 | Fax (+49) 0 73 09/8 72-6 35


Tel. (+49) 0 73 09/8 72-6 00 | Fax (+49) 0 73 09/8 72-6 35



mini1


mini 2


mini1


mini2

01

23

REF

mSK

YMS0

1

Ø 5 mm

67

brecision implant light Impression material orange2 x 50 ml 10 mixing cannulas yellow10 Intra-oral tips

REF 580 BL05 0

brecision implant heavy Impression material blue1 x 380 ml 5 x dynamic mixers 1 x bayonet ring yellow

REF 580 BH38 0

REF SKY-OR55

O-ringe6 pieces

REF 540 0113 3

2 x 50 ml Multisil-Mask hard in cartridges 24 mixing cannulas

min

iSKY


Presentation of a problem

Initial situation When making an impression of the mini1SKY im-plants, the o-ring (SKY-OR55) is placed over the ball head

At the same time, the impression material brecision implant heavy (580 BH38 0) is added to an impres-sion tray and applied to the area being molded.

Once the impression material has cured, it is possible to carefully remove the impression tray. The o-rings remain in the impression. The torx of the mini1SKY implants is clearly recognizable and aids reposition-ing of the laboratory analog.

When repositioning the implant analog (m1SKYXIA), it is necessary to bear in mind that the torx geometry in the impression material corresponds with the ori-entation of the torx from the implant analog.

Using a gingival mask, Multisil-Mask hard (540 0113 4), the implant analog must be blocked, ensur-ing that the exact position of the implant analog is

Control using a bridge framework has resulted in a high level of precision between the initial model and the model from the impression.

maintained during model fabrication.

The Sheffield test was passed without any complica-tions.

The torx of the mini1SKY implants and the o-rings is then fully molded using the impression material, brecision implant light (580 BL050).

mini

1 2 3

4 5 6

7 8 9

10


11 m

m REF m2SKYPA1

mini2SKYImpression Abutment open tray

mini2SKY

REF m2SKYXIA

mini2SKYImplant analog

1.5 mm

new18

.82

mm

REF m2SKYGF3

mini2SKYGingiva former

3 mm

4 mm

REF m2SKYLC2

miniSKY Locator®height 2 mm1 pieces

REF m2SKYLC4

miniSKY Locator®height 4 mm1 pieces

Impression coping4 pieces

REF LOCZAK40




mini2SKY impression

mini2SKY gingiva formerThe high level of primary stability of the miniSKY implants in all bone qualities enables transgingival healing, which means that a stressful second operation can be avoided and the gingiva is less traumatized.

The mini²SKY gingiva former completely covers the high preci-sion torx and supports and ideally molds the soft tissue.

The use of the slimline mini²SKY impression abutment enables simple and fast impressions even of very narrow gaps. For the impression of mini²SKY implants, the mini²SKY impression abut-ment, open tray, (m2SKYPA1) is screwed on the implants and the impression is taken according to the standard procedure for the open tray technique.

In order to produce the master model, the mini²SKY implant ana-log (m2SKYXIA) is screwed to the mini²SKY impression abutment and the model is manufactured from super-hard stone.

The locator impression coping is used to make an impression of the mini²SKY Locator®.

2 mm

3.9 mm

4 mm

69

Prosthetics

Photos: Dr. Saal, Hamburg (DE)

SKY Precious metal matrix

REF SKYGM225

SKY O-ring

REF SKY-OR50

2.25 mm

2.5 mm

3 mm

3.25 mm

5.2 mm

REF m1SKYXIA

mini1SKYImplant analog

mini1SKY

REF SKY-OR55

O-ringe6 pices

min

iSKY

mini1SKY – Fixation of prostheses in severely atrophied jaws

Fixation of prostheses on mini1SKY with

• SKY precious metal matrix• SKY o-ring matrix

NoteIn this case, it is necessary to wait for the osseointegration of the implants, prior to loading.

Qu-resin rosa Assortment 14 pieces 1 cartridge 50 ml 1 Qu-connector 10 ml12 mixing cannulas, size 1, blue

REF 540 0116 1

mini


mini2SKY Locator®

REF m2SKYLC2

REF m2SKYLC4

REF LOCLAB20

mini2SKY

Prosthetics


miniSKY Locator®Height 2 mm1 piece

miniSKY Locator®Height 4 mm1 piece

Locator® Processing set2 sets

The miniSKY Locator® abutments are fixed to the implants using the miniSKY retaining screw. The prosthesis is then manufactured using conventional dental procedures. The Locator® retention elements up to 20° are used for retention.

Narrow jaws represent a challenge when fixing removable res-torations in older, edentulous patients. These patients frequently refuse augmentative measures, or their general state of health requires a procedure that does not involve major surgery. The use of miniSKY Locator® allows minimally invasive implant place-ment and healing without loading and insertion after osseointe-gration using the proven Locator®.

In combination with the blueSKY placed at an angle, SKY classic posterior implants, and the SKY Locator® angled, it is possible to fabricate implant-supported restorations which offer superior comfort to patients.

The mini²SKY Locator® is available in heights of 2 mm and 4 mm and provides special protection against rotation for simple place-ment of the mini²SKY Locator® on the external precision torx of the mini²SKY implant to avoid screw loosening.

The appropriate retaining screw is used for fixation. This ensures that the load is distributed via the precision torx in the implant and the screw is protected from overloading. The original Loca-tor® retention inserts 20° can be used for this procedure.

Images: m.c. Zahntechnik, Oldenburg (DE)

2 mm

3.9 mm

4 mm

3.2 2.8

71

REF m2SKYMDT

mini2SKYMD-Abutment titan

REF m2SKYMDB

mini2SKYMD-Abutment BioXS

Photos: Dr. Ghirlanda, Rom (IT)

mini2SKY

min

iSKY

Restoration of narrow gaps – mini2SKY


The high precision torx ensures optimal load distribution of the abutment in the implant, which prevents screw loosening and guarantees the longevity of the connection.

Transgingival healing with a prefabricated or individual gingiva former spares the patients from a second intervention.

Material: BioXSTorque: 20 Ncm

mini

9 m

m

2.8

3.2

9 m

m


mini2SKY

REF m2SKYUFA

new

Prosthetics

2.8

Uniformadhesive gap

Non-uniform adhesive gap

Rotation stop on two sides results in a uniform adhesive gap.

Rotation stop on one side results in a non-uniform adhesive gap.

mini2SKY uni.fit abutment 1 piece

Material: Titanium Torque: 20 Ncm

With the new mini2SKY uni.fit abutment, laboratory-produced individual abutments can be manufactured on mini2SKY, which means that optimal aesthetics can be achieved even in narrow gaps. The individual abutments are cemented in the laboratory on the very low titanium base.

mini2SKY individual abutment

Available from autumn 20132.8

3.2

73

Reliable fixation of the scan and drilling templates in situ is a key prerequisite for precise transfer of 3D implant planning from the PC to the mouth of the patient.

Bone-supported drilling templates are expensive and cause major trauma owing to extensive flap procedures.

Precision, in particular in the edentulous ridge, is considerably limited when using mucosa-supported templates.

Photos: Dr. Guillaume Reys, Sélestat, (FR)

Implant planning

Implant planning - safe and precise transfer

min

iSKY

bredent medical offers the perfect solution with miniSKY-FRP. With 3 mini1SKY planning implants you create the optimal basis for

reliable and stable fixation of the scan template so that any problems during CT or DVT scans are eliminated. safe and stable fixation of the drilling template to avoid any errors during placement of the implants.Additionally, the mini1SKY planning implants can also be used to support the denture during the preparatory phase of

implant placement.

mini


REF m1SKYXIA

mini1SKYImplant Analog

mini1SKY Planning matrix white3 pieces

REF m1SKYPLM

SKY Precious metal matrix

REF SKYGM225

SKY O-ring

REF SKY-OR50

mini1SKYØ 2,8 mm L 10 mm

REF m1SKYL10

REF m1SKYL06

mini1SKYØ 2,8 mm L 6 mm

mini1SKY-FRP

mini1SKY-FRP

Implant planning

Everything you need

ImplantsThe mini1SKY implants of lengths 6 mm and 10 mm can be in-serted firmly in any bone.

SurgeryThe implants are inserted using the insertion instrument after the cavity has been pre-drilled using the twist drill from the SKY OP tray.

Impression and model fabricationWhen making an impression, only the o-ring (SKY-OR55) is at-tached. The implant analog is pushed into the impression and the model is manufactured.

Scan and drilling templateThe planning matrix fixes the scan and drilling templates se-curely and precisely.

Temporary restorationDuring the planning phase, the prosthesis in the lower jaw may be further stabilized by using either the SKY precious metal ma-trix or the SKY o-ring. In the upper jaw, the prosthesis should only be ground out and equipped with a soft relining.

3 m

m

3.3 mm

2.5 mm

3 mm

3.25 mm

5.2 mm

4 mm

6 m

m

2 mm

2.25 mm

4 mm

10 m

m

2 mm

2,25 mm

2.25 mm

75

Internet

min

iSKY

bredent medical in the internet

Structured and easily understandable informati-on on our “perfect prosthetic implant solutions thanks to innovative materials and technologies” and ordering for our entire product range is pro-vided at www.bredent-medical.com. Furthermore you will get latest news and helpful videos on our twitter (www.twitter.com/bredentgroup) and youtube (www.youtube.com/bredentgroup) chan-nels.

In the press section new products and therapies are presented and already published dental ar-ticles of renowned users of our products can be downloaded.

The „Information on ordering“ section includes all the relevant information for placing orders. Currently, an online shop is being created.

Internet

mini

bredent medical GmbH & Co.KGWeissenhorner Str. 2 | 89250 Senden | GermanyTel. (+49) 0 73 09 / 8 72-4 40Fax (+49) 0 73 09 / 8 72-4 44www.bredent-medical.come-mail [email protected]

Mistake and subject to change reserved 000250GB-20130903

Presentation of the systemSKY Implant system - prosthetically unique

REF 000 429 GB REF 000 330 GB

Other offers that may be of interest to you

REF 000 501 GB

HELBO

HELBO-Therapie

Beherrscht die Infektion in der Chirurgie und Implantologie

10 JAHRE

ERFO

LG

W

ISSENSCHAFTLICH

BELE

GT

Kursprogramm 2013

Neue Chancen für Ihren Erfolg

A C A D E M Y

AUFBAUEN

SICH

ERN ERHALTEN

RegenerationRegenerationRegenerationRegeneration

Das ein und alles für den Kieferkamm

Sky implant system bredent

Documents

Transcript of Sky implant system bredent