2 Ph. 772.293.0071Fax. 772.465.4368

SKC-PTA CORDLESS SHUT-OFF CLUTCH SCREWDRIVERS18 VDC Brushless Motor, Li-ion Battery

Add freedom of movement to your assembly process with the new Kilews West SKC-PTA Series Cordless Screwdrivers. These drivers utilize the same precision shut-off clutch technology that is the foundation of the Kilews West Electric Screwdriver product line. High-performance 18V Lithium-Ion Batteries provide plenty of power and long run times between charging cycles.

External Dimensions (mm)

Torque Range:1 - 22 Nm (9 - 194 in-lbs).

• Precise Shut-off Clutch provides excellent repeatability.

• Hi/Lo Speed Selection switch on screwdriver.

• High performance 18VDC Li-Ion Batteries (purchased separately).

• Slide switch for selection of Forward/Reverse rotation; clutch operates in CCW direction at approx. 30% higher torque level than CW setting.

• Versions available with either internal or external clutch adjustment.

• Green/Red LED’s and audible indicators alert operator of proper clutch function at shut-off. A green LED and short beep confirm that the tool has shut-off correctly, a red LED and long beep signal confirms an incorrect cycle.

• To conserve battery life, the screwdriver goes into sleep mode when idle for more than 3 seconds.

• Front facing LED illuminates fastening area when the trigger is pulled.

• LED indicator warns operator of low battery capacity - the red LED will flash when 20% capacity remains and light continuously at 10%.

• Charging Station (purchased separately) provides quick recharge time.

Features:

SpecificationsModel Number

(1)Range (Nm) Range (In-lbs) Speed

(RPM)Hi / Lo

Dimensions (mm)(in)

Length x Height

Weight (kg)(lbs)

Applicable Batteries / Chargers

Models with external torque adjusting nut and reference scale

SKC-PTA-B35 1 - 3.5 9 - 30 1000 / 650217 x 196 (mm)

8.5 x 7.7 (in)(less battery)

0.79 kg/1.7lbs (less battery) Battery:

SKC-LB1820BBattery Charger:SKC-P80W-D

SKC-PTA-B35F 1 - 3.5 9 - 30 2000 / 1300

SKC-PTA-B60 2 - 6 18 - 53 1000 / 650

SKC-PTA-B50F 2 - 5 18 - 44 2200 / 1400 233 x 200 (mm)9.2 x 7.9 (in)(less battery)

1.1 kg/2.4lbs(less battery)

SKC-PTA-B90 3 - 9 27 - 79 1000 / 650

SKC-PTA-B120 6 - 12 53 - 106 880 / 570

Models with internal torque adjustment - open access cover and set using adjusting key

SKC-PTA-80 4 - 8 36 - 70 1200 / 780 214 x 197 (mm)8.4 x 7.8 (in)(less battery)

1.0 kg/2.2lbs(less battery)

Battery:SKC-LB1840Battery Chargers:SKC-P120W/SKC-P80W

SKC-PTA-120 6 - 12 53 - 106 720 / 500

SKC-PTA-150 4 - 15 36 - 132 600 / 380 224 x 200 (mm)8.8 x 7.9 (in) (less battery)

1.2 kg/2.6lbs(less battery)SKC-PTA-220 8 - 22 70 - 194 350 / 200

(1) Standard model number is for tool with 1/4” hex bit holder. Add suffix ‘SW’ for 3/8” square drive option (eg. SKC-PTA-150W)

3 Ph. 772.293.0071Fax. 772.465.4368

SKC-PTA CORDLESS SHUT-OFF CLUTCH NUT-RUNNERSAngle Type Brushless High Torque Battery Screwdrivers Series

SKC-PTA-L300 & SKC-PTA-L600

SpecificationsModel SKC-PTA-L300 SKC-PTA-L600

Input Voltage 18V

Torque (Nm)(in.lbs) 12-30Nm106-266 in.lbs

25-60Nm221-531 in.lbs

Repeatable Torque Accuracy ±3% ±5%Torque Adjustment Internal SteplessFree Speed (r.p.m) ±10%

Hi 420 200Lo 270 130

Weight(kg)(lbs) 1.9kg / 4.2lbs(without battery)

2.85kg / 6.3lbs(without battery)

Size(mm)(in) 460mm / 18.1in (without battery)

530mm / 20.9in (without battery)

Applicable Battery SKC-LB1820B SKC-LB1840Applicable Charge Station SKC-P80W-D SKC-P120W/SKC-

P80WDrive Size W W

External Dimensions (mm)

53

15

16

62.8

68

17.518.5

3/8”sq 1/2”sq

4 Ph. 772.293.0071Fax. 772.465.4368

SKC-PTS SEMI-AUTOMATIC / SLIP-CLUTCH CORDLESS SCREWDRIVERSBrushless Medium Torque Battery Screwdrivers Series

SKC-PTS-120, SKC-PTS-80, SKC-PTS-50

SpecificationsModel SKC-PTS-120 SKC-PTS-80 SKC-PTS-50

Input Voltage 18V

Torque (Nm)(in.lbs) 6-12Nm 53-106 in.lbs

4-8Nm36-71 in.lbs

1.5-5Nm13-44 in.lbs

Repeatable Torque Accuracy ±10%Torque Adjustment 23+MAX stepsFree Speed (r.p.m) ±10%

Hi 700 1200 2200MID 500 900 1600LO 350 600 1100

Weight(kg)(lbs) 1.0kg/2.2lbs(without battery)

Size(mm)(in) 188 x 182(mm) / 7.4 x 7.2(in) (LxH without battery)

Applicable Battery SKC-LB1820/SKC-LB1840Applicable Charge Station SKC-P120W/SKC-P80WDrive Size B W

External Dimensions (mm)

Torque Range:1.5 - 12 Nm (13.3-106 in.lbs)

3/8” sqHEX 6.35mm (no.3)

Features:• SKC-PTS Series has a repeatable torque

accuracy within ±10%.• High performance, Li-ion Batteries

(purchased separately).• LED indicator warns operator of low battery

capacity - the red LED will flash when 20% capacity remains and light continuously at 10%.

• Front facing LED illuminates fastening area when the trigger is pulled.

• Hi/Mid/Lo Speed Selection switch on screwdriver.

• To conserve battery life, the screwdriver goes into sleep mode when idle for more than 3 seconds.

• Charging Station (purchased separately) provides quick recharge time.

5 Ph. 772.293.0071Fax. 772.465.4368

SKC-PTS SEMI-AUTOMATIC / SLIP-CLUTCH CORDLESS SCREWDRIVERS SKC-PTI CORDLESS IMPACT - SHUT-OFF Brushless Medium Torque Battery Screwdrivers Series

SKC-PTI-100

SpecificationsModel SKC-PTI-100

Input Voltage 18V

Free Speed (r.p.m) ±10% 0-2300B.P.M. 0-3000

Torque (N.m)(ft.lb) 0-100 Nm / 74 ft.lb

Impact Modes1 0-20 Nm / 15 ft.lb2 0-40 Nm / 30 ft.lb3 0-60 Nm / 40 ft.lb4 0-80 Nm / 59 ft.lb5 0-100 Nm / 74 ft.lb

Weight(kg)(lbs) 1.0kg / 2.2lbs(without battery)

Size(mm)(in) 155 x 195(mm) / 6.1 x 7.7(in) (LxH without battery)

Applicable Battery SKC-LB1820BApplicable Charge Station SKC-P80W

Drive size 1/4” Hex

External Dimensions (mm)

155.060

.019

5.0

250.

0

.

• Five Selectable Shut-off Settings.• Compact Cordless Design.• LED Light to illuminate work area.• Status lights indicate proper shut-off

and low battery charge.

(4)

(1)

(3) (2)

(6)

(5) (8)

(7)

Status Indicator LightGreen - Shut-Off Indication Red - Battery Charge Status

• 1.6kg / 3.2 lbs (with battery)

OverviewNo. Description No. Description(1) Trigger Switch (5) Wrist Strap(2) Fwd/Rev button (6) Belt Hook(3) LED Work Area Light (7) Status Indicator Light(4) Bit Retainer (8) Torque Range Selection

Torque Range Selection

Torque Range:0 - 100 Nm (0-74 ft.lbs)

Features:

6 Ph. 772.293.0071Fax. 772.465.4368

SKC-PTI CORDLESS IMPACT WRENCHES Brushless High Torque Battery Screwdrivers Series

External Dimensions(mm)

SpecificationsModel SKC-PTI-250 SKC-PTI-160

Input Voltage 18V

Free Speed (r.p.m) ±10% 0-2300 0-2100B.P.M. 0-3800 0-2800

Torque (N.m)(ft.lb) 0-250Nm / 184 ft.lb 0-160Nm / 118 ft.lb

Impact Modes

Hi 0-250Nm / 184 ft.lb 0-160Nm / 118 ft.lbMID 0-160Nm / 118 ft.lb 0-120Nm / 89 ft.lbLO 0-100Nm / 74 ft.lb 0-80Nm / 59 ft.lb

Weight(kg)(lbs) 1.1kg / 2.4lbs(without battery)

Size(mm)(in) 188 x 181(mm) / 7.4 x 7.1(in) (LxH without battery)

Applicable Battery SKC-LB1840/SKC-LB1820

Applicable Charge Station SKC-P120W/SKC-P80W

Drive size(Select Appropriate Suffix)

B=1/4” Hex W=1/2” SQ. DR.

SKC-PTI-250, SKC-PTI-160

1/2”sqHEX 6.35mm(No.3)

1/2”sq

Torque Range:2 - 250 Nm (0-184 ft.lbs)

Features:

• SKC-PTI Series non shut-off impact driver applies increasing torque through the internal hammer mechanism, while the trigger is held.

• High performance, Li-Ion Batteries (purchased separately).

• LED indicator warns operator of low battery capacity - the red LED will flash when 20% capacity remains and light continuously at 10%.

• Front facing LED light illuminates fastening area when the trigger is pulled.

• Hi/Mid/Lo Speed Selection switch on screwdriver.• To conserve battery life, the screwdriver goes into

sleep mode when idle for more than 3 seconds.• Charging Station (purchased separately) provides

quick recharge time.

7 Ph. 772.293.0071Fax. 772.465.4368

High performance lithium-ion batteries allow the SKC-PT Series Screwdrivers to perform a high quantity of fastening cycles between charges. In some instances, two battery sizes are available - a standard (1950 mAh) battery and an extended life (3900 mAh) battery.

LITHIUM-ION BATTERIES

The SKC-LB Battery Chargers quickly recharge the cordless screwdriver’s batteries so that they are ready when needed. The charger is capable of bringing a standard battery to an 80% charge level in about 25 minutes.

Features include:• Battery identification to help protect against charging the wrong

brand/type of battery.• Over-temperature protection, output over-voltage protection.• Audible and visual indication when battery reaches full charge.• ETL / CE Compliant.

Indicator lights provide visual indication of:• Power On• Battery Charging• Charge exceeds 80%• Fully Charged• Charging Error

BATTERY CHARGERS

BatteryCharger

Input Output Use to charge battery model Dim (mm)(in)L x W x H

Weight(g)(lbs)

SKC-P80W-D(1820B only) 90-240 VAC

50/60 Hz

21VDC, 3.2A SKC-LB1820B 115 x 145 x 80(mm)4.5 x 5.7 x 3.1(in)

530g/1.2lbs

SKC-P80W(standard charger)

21VDC, 3.2A SKC-LB1820/1840 115 x 145 x 80(mm)4.5 x 5.7 x 3.1(in)

530g/1.2lbs

SKC-P120W**(premium charger)

21VDC, 3.0-4.5A SKC-LB1820/1840 170 x 160 x 80(mm)6.7 x 6.3 x 3.1(in)

1068g/2.4lbs

**Premium Charger Model SKC-P120W has a built-in cooling fan and an LCD display which shows Charge Time, Cell Temperature, Battery Voltage, Recharge Status and Battery ID verification.

Battery Model/Capacity

SKC-P120W SKC-P80W SKC-P80W-D

SKC-LB1820(1950mA/hr)

40 min. 40 min. -

SKC-LB1840(3900mA/hr)

60 min. 80 min. -

SKC-LB1820B(2000mA/hr)

- - 40 min.

Approximate Battery Charge Times

LITHIUM-ION BATTERIES & BATTERY CHARGERSCharge Stations: SKC-P120W, SKC-P80W, SKC-P80W-D

Rechargeable Batteries: SKC-LB1820, SKC-LB-1820B, SKC-LB1840

DISPLAY DESCRIPTION

SKC-PTI CORDLESS IMPACT WRENCHES

18V Li-Ion Battery Model

NumberRating(mAh)

Use with tool models

Dim (mm)(in)L x W x H

Weight(g)(lbs)

SKC-LB1820B 2000Refer to

ScrewdriverModelChart

92 x 75 x 639(mm)3.6 x 3.0 x 2.4(in)

430g/1lbs

SKC-LB1820 1950 119 x 90 x 40(mm)4.7 x 3.5 x 1.6(in)

430g/1lbs

SKC-LB1840 3900 119 x 90 x 59(mm)4.7 x 3.5 x 1.6(in)

720g/1.6 lbs

Cat#KWUS171215