SITRAIN Training Catalog - · PDF filePrice : Rp 7.700.000,00 (include 10% VAT) ... •...

Industry Automation and Drive Technologies Training Center Jakarta, IndonesiaTraining Course Catalog 2015-2016

SITRAIN

PT. SIEMENS INDONESIA ASP RC ID DF TRAINING CENTER

Arcadia Office Park, Tower F,16th Level, Jl. T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520Phone : +62 (021) 2754 3167 Fax: +62 (021) 2754 3364Email : [email protected] : siemens.asia/e-pass_v2/ID

Telp : +62 (021) 2754 3167Toll free : 08001 180 8888Fax : +62 (021) 2754 3364Email :[email protected] : siemens.asia/e-pass_v2/ID

INDONESIAIndustry Automation/ Drive TechnologiesTraining Catalog

Training Center

CP. : A.A. Firdaus (Training Manager)


SITRAIN



Catalog Information

The catalog contains the overview of our available courses. Please contact us if the courses you are interested inare not yet scheduled.

On customer’s request some courses can be held at the factory site (On-site Training).

The communication language in the activity is Bahasa Indonesia. For the reason of precise description weprepared the course documents in English.

If the date of commencement of a course does not match your schedule, we are prepared to respond flexibility toyour demands.

Special courses can be provided upon customer’s request.

Courses Reservation

Reservations should be made as early as possible as applications will be dealt with in the order in which they arereceived (at least 3 weeks prior to the commencement of the course), so please book early to avoiddisappointment.

Except in special courses, applications must be received at least 4 weeks prior to the commencement of thecourse.

Introduction

The successful utilization of new technologies as applied to modern industrial processes requires updatedknowledge about operation, functions and maintenance for both the manufacturer and the user.

To help existing plant personnel work effectively with the industrial electronics and control systems, it would benecessary to upgrade their knowledge and skills through a series of specialized training courses.

The structured training courses have been designed to suit individual knowledge levels and experiences, byadapting the selective learning path concept. You can thus choose a specific section or all sections of a particularcourse.

All courses are conducted by senior commissioning engineers who have extensive theoretical and practicalexperience.


SITRAIN



SYSTEM COURSE

(ST-MIKRO1) 3 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 7.700.000,00(include 10% VAT)

PLC SIMATIC S7-1200 Series

Target audience

This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledgeof SIMATIC S7-1200 programmable controller:

• Solving simple tasks with SIMATIC S7-1200 controllers.• Using SIMATIC S7-1200 to learn about the principle of operation and application of PLC and KTP Basic

Panel.• Participating in one of the follow-on SIMATIC S7-1200 courses.

Pre-requisite knowledge

This is an entry level course that requires knowledge of logic control technology and Windows.

Course objectives

On completion of this course, the participant shall be able to:

• Know the components part and principle of operation of a SIMATIC S7-1200 Programmable Controller andthe rules governing the handling of the hardware and programming of a SIMATIC S7-1200.

• Use STEP 7 Basic Tools for generation, documentation, testing program and error detection.• Make and start up simple program for control task with S7-1200 Programmable controller and KTP Basic

Panel.• Working with symbol list.• Working with program blocks• Data Management with Data Blocks.• Saving & documenting programs.

Course contents

• Introduction to SIMATIC S7–1200 systems: Hardware systems components, and configuration.

• STEP 7 BASIC Software: Software feature, functionality, Installing, and generate and back up program PLC SIMATIC S7-1200.

• Basic, standard and special operations of SIMATIC S7-1200 Programmable controller.• SIMATIC S7–1200 Programmable controller communication with KTP Basic Panel.

Note: All topics are backed up by practical exercises using the Field PG / PC programmer and the S7-1200programmable controllers.


SITRAIN



Basic Programming Course

(ST-PRO1) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 7.700.000,00(include 10% VAT)

PLC SIMATIC S7-300/400 Series

Target audience

This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledgeof SIMATIC S7 programmable controller:

• Solving simple tasks with SIMATIC S7 controllers.• Using SIMATIC S7 to learn about the principle of operation and application of PLC.• Participating in one of the follow-on SIMATIC S7 courses.


This is an entry level course that requires knowledge of logic control technology and windows. Knowledge inSIMATIC S5 and Windows system is an advantage.

Course objectives


• Know the components parts and the principle of operation of a SIMATIC S7 programmable controller andthe rules governing handling of the hardware and basic programming of a SIMATIC S7.

• Be able to use STEP 7 tools for documenting and testing the programs.

Course contents

• Familiarization with the performance characteristic of PLC and programming devices.• Configuring the CPU and the I/O modules by Hardware Configuration.• Ability to structure, generate, document and put into operation simple PLC program with SIMATIC S7.• Be acquainted with structure and execution of programs in SIMATIC S7 programmable controllers.• Ability to use the STEP 7 tools for generating, documenting, use absolute / symbolic addressing and testing

the programs.

Note: All topics are backed up by practical exercises using the Field PG/ PC and the S7-300/400 programmablecontrollers and plant model.


SITRAIN



Advanced & Troubleshooting Course

(ST-PRO2) 5 DaysCourse locations : Jakarta(Other locations available on requestPrice : Rp 8.800.000,00 (include10% VAT)

PLC SIMATIC S7-300/400 Series

Target audience

This course is aimed at qualified operating, service, and assembly personnel.


Participate in the SIMATIC S7 Basic Programming Course.

Course objectives


• Understand the program structure of SIMATIC S7 controller and all its functions.• Be able to use STEP 7 Diagnostic & Troubleshooting tools to locate and remove faults on the PLC system.• Be able to program and use configurable blocks, analog processing, extended instructions, extended

function of symbolic programming, interrupt processing and communication via MPI interface.• Be able to convert STEP 5 to STEP 7 programs.

Course contents

• Handling of data types, data storage and data archiving.• Using the STEP 7 tools to configure and parameterize the CPU and its modules.• Using STEP 7 Diagnostic & Troubleshooting tools to locate and remove faults on the PLC system.• Handling of the analog modules and processing analog values.• Programming and using configurable blocks and employing conversion, arithmetic, shift and jump

instructions.• Be able to use extended functions for symbolic programming and interrupt-controlled program execution.• Configuring and implementing the homogeneous communication links via the MPI interface.

Note: All topics are backed up by practical exercises using the Field PG/ PC and the S7-300/400 programmablecontrollers and plant model.


SITRAIN



SIMATIC S7-300/400 Series

(S7-NETPROFI DP) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.800.000,00(include 10% VAT)

Ethernet & PROFIBUS Network

Target audience

This course is aimed at planning, design, application and service engineers who work on Ethernet andPROFIBUS Network communication between S7 PLCs using CP343/ CP443.


Knowledge of SIMATIC S7 and basic communication concepts.

Course objectives


• Be familiar with design and structure of the Ethernet and PROFIBUS network and system.• Be able to connect different automation equipment to the Ethernet and PROFIBUS network.• Be able to parameterize the connection using S7-NETPRO and the CP343 / CP443 modules and program a

PLC-PLC connection using TCP/IP and FDL or FMS mode.• Be able to use the Test and Diagnostic functions for Ethernet and PROFIBUS Network.

Course contents

• General concept of Ethernet and PROFIBUS and standard Application possibilities of FDL and FMS.• Using the S7-NETPRO for Ethernet and PROFIBUS applications to parameterize the TCP/IP and FDL /

FMS connections.• Data transfer between CPU and CP343 / CP443 via Send–Receive block and Load / Transfer commands.• Using Test and Diagnostics functions to analyze the Ethernet and PROFIBUS communications.• Operation of Integrated DP master of the CPU S7 300/400 series.• Data transfer between CPU and I/O modules or Field Devices as slaves.• Application of PROFIBUS-DP for various ET200 series and Field Devices such as SIMOREG, SIMOVERT,

Siemens OP/TP and PG/PC.

Note : All topics are backed up by practical exercises using the Field PG/ PC and the S7-300/400 programmablecontrollers and plant model.


SITRAIN



SYSTEM COURSE

(ST-WCCFSYS1) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.800.000,00(include 10% VAT)

HMI SIMATIC WinCC Flexible

Target audience

This course is for personnel who want to work with WinCC Flexible for process visualization system, monitoringand controlling anything from individual machine to large installation and who want to consolidate and extend theirknowledge on WinCC Flexible.


Sound knowledge of SIMATIC S7 Basic, Maintenance and Troubleshooting Course, PROFIBUS or IndustrialEthernet Network and Windows 2000/XP environment.

Course objectives


• Be capable of programming WinCC Flexible for operators.• Process visualization with fully graphical, object oriented user interface with windowing techniques.• Be able to set up the bus connection with PROFIBUS or Industrial Ethernet.• Be able to connect to SIMATIC configuration world (signal list, programming device functions).

Course contents

• Communication setting from the Operator Station to the SIMATIC S7.• Visualization and control of fully graphical system pictures.• Alarm logging system for the entry, archiving and selective display of events.• Message representation, message archiving & message configuring.• Data Management system for archiving user data.• Measured value archiving with comprehensive display and control functions for curves (trends).

Note: All topics are backed up by practical exercises.


SITRAIN



SYSTEM COURSE

(ST-BWINCCS) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.800.000,00(include 10% VAT)

SCADA SIMATIC WinCC

Target audience

This course is intended for configuring engineers, commissioning engineers, decision-makers and servicepersonnel, or for personnel who want to work with WinCC for process visualization system, monitoring andcontrolling a machine process.


Sound knowledge of SIMATIC S7 Basic, Maintenance and Troubleshooting Course, PROFIBUS or IndustrialEthernet Network and Windows 2000/XP environment.

Course objectives


• Be capable of programming WinCC for operators.• Process visualization with fully graphical, object oriented user interface with windowing techniques.• Be able to set up the bus connection with PROFIBUS and Industrial Ethernet.• Be able to connect to SIMATIC configuration world (signal list, programming device functions).

Course contents

• Overview of the WinCC system.• Starting a project, connection to S7, and variable simulation.• Graphics Designer & graphic display for HMI.• Alarm display and alarm logging.• Curve display and tag logging.• User archives.• Report designer.• Background processing.



SITRAIN



SIMATIC PCS7 V7

(ST-PCS7SYS) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 10.450.000,00(include 10% VAT)

SIEMENS DCS

Target audience

Intended for configuring engineers/programmers, commissioning personnel, and operation personnel.


Basic knowledge of automation system and PLC S7 programming.

Course objectives

As a user of the Process Control System SIMATIC PCS7, the participant learns how to apply the engineeringfeatures in a structured and efficient way. Supported by examples and exercises, the process automation of aplant is realized up to the HMI level. Covered are aspects of SIMATIC PCS7, such as its system wideconsistency, plant oriented, data and project management and the co-operation between the various componentsand tools.

Course contents

• System overview and architecture: subsystems for automation, operation, communication and engineering.• Configuring concept: from the field level up to the HMI level with integrated WinCC system.• Network and hardware configuration.• Process Object View as a plant based structure of the project.• Standardization by library and block concept, Process tag types, Model.• Automation solutions by graphical configuration with CFC and SFC.• Monitoring and controlling.• Distributed engineering (Multi Project).



SITRAIN



SIMATIC PCS7 Fail Safe

(ST-PCS7SYSSF) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 10.450.000,00(include 10% VAT)

SIEMENS Fail Safe System

Target audience

Intended for configuring engineers/programmers, commissioning personnel, and operation personnel.


Basic knowledge of automation system and PCS7programming.

Course objectives

As a user of the Process Control System SIMATIC PCS7, the participant learns how to apply the engineeringfeatures in a structured and efficient way. Supported by examples and exercises, the process automation of aplant is realized up to the HMI level. Covered are aspects of SIMATIC PCS7, such as its system wideconsistency, plant oriented, data and project management and the co-operation between the various componentsand tools.

Course contents

• System overview and architecture: subsystems for automation, operation, communication and engineering.• Configuring concept: from the field level up to the HMI level with integrated WinCC system.• Network and hardware configuration.• Process Object View as a plant based structure of the project.• Standardizing by library and block concept, Process tag types, Model.• Automation solutions by graphical configuration with CFC and SFC.• Monitoring and controlling.• Distributed engineering (Multi Project).• Overview of S7-400H Redundant System• Overview of Safety system ( remote I/O hardware configuration , S7-FLibrary,Fail safe user program )• Overview of Safety Matrix ( Cause & Effect configuration , Matrix Transfer to Project , Compiling &

Downloading )• Passivation and Reintegration of F-I/O channel in CFC and WinCC program

Note: All topics are backed up by practical exercises using PLC-Sim to support the training course.


SITRAIN



SIMOREGSeries 6RA24/70 DC Drives(SD-GMP5) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.250.000,00(include 10% VAT)

DC DRIVES

Target audience

This course is intended for personnel or customers who will be commissioning, servicing, and maintaining theSIMOREG series 6RA24/6RA70.


Basic knowledge of DC motors, power devices and control engineering.

Course objectives

On completion of the course, the participants should:

• Be able to start up the converter.• Be able to adapt the parameters to the requirements of the drive.• Be able to record the parameters.• Diagnose faults, alarms and solve problems.

Course contents

• Explanation of the principle of operation.• Commissioning of the drive, parameterization and verification of the controller-optimization.• Structure of the function diagrams.• Operating conditions, faults and alarms.• Function of the binary and analog input and outputs.• Reading and loading parameters with Drive Monitor program.• ‘Trace-buffer’ and Peer-to-peer’ function.• Practical training, based on selected applications and troubleshooting.

Note: All topics are backed up by hardware based exercises

SIMOREGSeries 6RA24/70 DC Drives(SD-GMP5) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.250.000,00(include 10% VAT)


SITRAIN



MICROMASTERSeries MM420/440(SD-MM4) 3 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.250.000,00(include 10% VAT)

AC DRIVES

Target audience

This course is intended for personnel or customers who will be commissioning, servicing, and maintaining theMicromaster Siemens inverter system.


Basic knowledge of AC motors, power devices and control engineering.

Course objectives


• Be able to start up the converter.• Be able to adapt the parameters to the requirements of the drive.• Be able to record the parameters.• Be able to carry out the commissioning of drives fed by converters of the Micro Master 420/440 Series.• Diagnose faults, alarms and solve problems

Course contents

• Discussion of the modular concept of the series Micro Master 420/440 (basic units, options).• Commissioning of a unit and discussion of the special functions (setting of the parameters, optimization).• Drive Monitor (operation, programming, data transfer via PC).• Diagnosis, fault finding and fault localization.



SITRAIN



SIMOVERT MASTER DRIVESSeries 6SE70(SD-MD64) 5 DaysCourse locations : Jakarta(Other locations available on request) \Price : Rp 8.250.000,00(include 10% VAT)

AC DRIVES

Target audience

This course is intended for technicians, engineers or maintenance personnel who must project or maintain aSIMOVERT Master Drives System.


Basic knowledge of AC motors, of power devices and of control engineering.

Course objectives


• Be able to start up the converter.• Be able to carry out the commissioning of drives fed by converters of the Series Master Drives, and• Diagnose faults to board level.• Be able to record the parameters.

Course contents

• Discussion of the modular concept of the series Master Drives (basic units, options).• Commissioning of a unit and discussion of the special functions (setting of the parameters, optimization).• CUVC/Vector Control module (frequency, speed, torque control).• Supplementary functions (automatic restart / generator buffering / restart on the fly / DC braking).• CBP module (PROFIBUS communication to PLC).• Drive Monitor (operation, programming, data transfer via PC).• Diagnosis, fault finding and fault localization.



SITRAIN



Service and Commissioning

(DR SNS SI) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 8.800.000,00(include 10% VAT)

SINAMICS S120/G120

Target audience

This course is intended for personnel or customers who will be commissioning, servicing, and maintaining theSINAMICS S120 / SINAMICS G120 series.


Basic knowledge of AC motors, of power devices and of control engineering..Course objectives


• Be able to start up the converter.• Be able to adapt the parameters to the requirements of the drive.• Be able to record the parameters.• Diagnose faults, alarms and solve problems.

Course contents

• Design of the drive system and overview of its documentation and services.• Start up and parameterization with the STARTER commissioning tool.• Structure of the function diagrams.• Diagnostics and troubleshooting.• Software function, closed-loop control and optimization of Servo and Vector drives.• Startup of the integral basic positioner (EPOS)• Practical exercise on the Training Kit.



SITRAIN



Basic & Advanced ProgrammingCourse

(S5-S02) 5 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 7.700.000,00(include 10% VAT)

PLC SIMATIC S5

Target audience

This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledgeof SIMATIC S5 programmable controller

• Solving simple tasks with SIMATIC S5 controllers.• Using SIMATIC S5 to learn about the principle of operation and application of PLC.• Participating in extended of SIMATIC S5 courses.


This is an entry level course that requires knowledge of logic control technology and Windows system.

Course objectives


· Know the components parts and the principle of operation of a SIMATIC S5 programmable controllerand the rules governing handling of the hardware and programming of a SIMATIC S5.

· Understand the program structure of the high performance programmable controllers.· Be able to make simple program modifications. Be able to evaluate fault message on the programmable

controller, and to recognize and remedy errors in the program and at the inputs and outputs of theprogrammable controller, and make program documentation.

· Be familiar to work with EPROM/EEPROM memory sub-module, the design and structure of theSIMATIC S5 programmable controllers, sequence programming technique using GRAPH-5 software.

· Be able to design, write and load more complex programs using the PG, read system address, start-upthe programs with various modes of operation, and fault handling block.

· Be able to program Analog Value Processing and work with the PID control algorithms of the S5115Uand S5-135U controllers.

Course contents

· Error detection and handling procedures.· Organization blocks for restart, and operation mode, and analog value processing.· Program documentation exercises (assignment list, comments, footers, and print-out program).· Programming of EPROM/EEPROM sub-module.· Program structure of high performance SIMATIC S5, number representation, data formats, and data

blocks.· Supplementary STEP 5 operations with function blocks.

Note: All topics are backed up by practical exercises using the Field PG / PC and the S5-100U / S5-115U / S5-135U in conjunction


SITRAIN



SIMOCODE PROEngineering & CommissioningCourse(SD-SIMOPRO) 3 DaysCourse locations : Jakarta(Other locations available on request)Price : Rp 7.700.000,00(include 10% VAT)

SMART MCC

Target audience

This course is aimed at planning, design and start-up engineer. Knowledge and skills acquired in course ofSIMOCODE PRO Engineering & Commissioning are consolidated and extended to enable the participants towrite and start-up as well as how the devices are linked together via PROFIBUS network.


· Basic knowledge of switchgear and control gear.· Basic knowledge of AC Motor & its protection.· Basic knowledge of PROFIBUS network.

Course objectives

On completion of the course, the participant should:

· Be familiar with the SIMOCODE PRO system function.· Be able to design, write and test many different ways in which these devices can be implemented.· Be able to use diagnostic function.

Course contents

· Overview of SIMOCODE PRO functions (motor protection and control functions, monitoring and diagnosticfunctions, logic functions).

· Overview of SIMOCODE PRO components (current detection modules, basic unit, expansion modules,operator control modules, accessories).

· Configure SIMOCODE PRO in several applications.· Integration of SIMOCODE PRO in S7 projects via PROFIBUS network.· Integration of SIMOCODE PRO in PCS7 projects via PROFIBUS network.

Note: All topics are backup by practical exercises using the Field PG / PC and the SIMOCODE PRO demo box inconjunction.

SITRAIN Training Catalog - · PDF filePrice : Rp 7.700.000,00 (include 10% VAT) ... •...

Documents

Transcript of SITRAIN Training Catalog - · PDF filePrice : Rp 7.700.000,00 (include 10% VAT) ... •...