SITRAIN Training Catalog

Industry Automation and Drive Technologies Training Center Jakarta, Indonesia Training Course Catalog 2012-2013

��

��PT. SIEMENS INDONESIA ASN RC ID ICS SD TRAINING CENTER��

Arcadia Office Park, Tower F Level 18th Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520 Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481 Email : [email protected] / [email protected] Website : www.siemens.co.id

Telp: +62 (021) 2754 3167 / 2754 3447 Toll free: 08001 180 8888 Fax: +62 (021) 2754 3481 Email: [email protected] ��[email protected]�

INDONESIA Industry Automation/ Drive Technologies Training Catalog

ICS - Training Center

CIP.: A.A. Firdaus (Training Manager) Ayu R. Suryandari (Training Administrator)


��



Catalog Information The catalog contains the overview of courses available. These are also offered subject to demand. In this case please contact us if the course in which you are interested is not yet scheduled. On customer’s request some courses can be held at the factory site (On-site Training). The communication language in the activity is Bahasa Indonesia. For the reason of precise description we prepared the course documents in English. If the date of commencement of a course does not match your schedule, we are prepared to respond flexibility to your demands. Special courses can be provided upon customer’s request. Courses Reservation Reservations should be made as early as possible as applications will be dealt with in the order in which they are received (at least 3 weeks prior to the commencement of the course), so please book early to avoid disappointment. Except in special courses, applications must be received at least 4 weeks prior to the commencement of the course.

Introduction The successful utilization of new technologies as applied to modern industrial processes requires updated knowledge about operation, functions and maintenance for both the manufacturer and the user. To help existing plant personnel work effectively with the industrial electronics and control systems, it would be necessary to upgrade their knowledge and skills through a series of specialized training courses. The structured training courses have been designed to suit individual knowledge levels and experiences, by adapting the selective learning path concept. You can thus choose a specific section or all sections of a particular course. All courses are conducted by senior commissioning engineers who have extensive theoretical and practical experience.


��



�� (ST-TIA P1) 3 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 7.700.000,00 (include 10% VAT)

�

� ��

Target audience This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge of SIMATIC S7-1200 programmable controller: • Solving simple tasks with SIMATIC S7-1200 controllers. • Using SIMATIC S7-1200 to learn about the principle of operation and application of PLC and KTP Basic

Panel. • Participating in one of the follow-on SIMATIC S7-1200 courses. Pre-requisite knowledge This is an entry level course that requires knowledge of logic control technology and Windows. Course objectives On completion of this course, the participant shall be able to: • Know the components part and principle of operation of a SIMATIC S7–1200 programmable Controller and

the rules governing handling of the hardware and programming of a SIMATIC S7–1200. • Use STEP 7 Basic Tools for generation, documentation, testing program and error detection. • Make and start up simple program for control task with S7–1200 Programmable controller and KTP Basic

Panel. • Working with symbol list. • Working with program blocks • Data Management with Data Blocks. • Saving & documenting programs. Course contents • Introduction to SIMATIC S7–1200 systems: Hardware systems components, and configuration. • STEP 7 BASIC Software: Software feature, functionality, Installing, and generate and back up program PLC SIMATIC S7–

1200. • Basic, Standard and Special operations of SIMATIC S7–1200 Programmable controller. • SIMATIC S7–1200 Programmable controller communicates with KTP Basic Panel.

Note: All topics are back up by practical exercises using the Field PG / PC programmer and the S7-1200 programmable controllers.

�


��



�� (S7-S02) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 7.700.000,00 (include 10% VAT)

�

� ��!��"#��

Target audience This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge of SIMATIC S7 programmable controller: • Solving simple tasks with SIMATIC S7 controllers. • Using SIMATIC S7 to learn about the principle of operation and application of PLC. • Participating in one of the follow-on SIMATIC S7 courses. Pre-requisite knowledge This is an entry level course that requires knowledge of logic control technology and windows. Knowledge in SIMATIC S5 and Windows system are advantage. Course objectives On completion of this course, the participant shall be able to: • Know the components parts and the principle of operation of a SIMATIC S7 programmable controller and

the rules governing handling of the hardware and basic programming of a SIMATIC S7. • Be able to use STEP 7 tools for documenting and testing the programs. Course contents • Familiarization with the performance with the performance characteristic of PLC and programming devices. • Configuring the CPU and the I/O modules by Hardware Configuration. • Ability to structure, generate, document and put into operation simple PLC program with SIMATIC S7. • Be acquainted with structure and execution of programs in SIMATIC S7 programmable controllers. • Ability to use the STEP 7 tools for generating, documenting, use absolute / symbolic addressing and testing

the programs. Note: All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable controllers and plant model.

�


��



��$%��$�&�� '(��)��*��

�

� �(S7-S03) 5 Days Course locations : Jakarta (Other locations available on request Price : Rp 8.800.000,00 (include 10% VAT)

� ��!��"#��

Target audience This course is aimed at qualified operating, service, and assembly personnel. Knowledge and skills acquired in course. � SIMATIC S7 Application Course are consolidated and extended to enable the participants to recognize and

remedy faults / errors in SIMATIC S7 controllers, and to participate in startup procedures. Pre-requisite knowledge Participate in SIMATIC S7 Basic Programming Course. Course objectives On completion of this course, the participant shall be able to: • Understand the program structure of the high performance of SIMATIC S7 controller and know all function of

the STEP 7. • Be able to use STEP 7 tools for Diagnostic & Troubleshooting of Faults on the PLC system. • Be able to program and using configurable blocks, to use analog processing, extended instructions,

extended function of symbolic programming, interrupt processing and communication links via MPI interface. • Be able to convert STEP 5 to STEP 7 programs. Course contents • Handling Data types, data storage and data archiving. • Using the STEP 7 tools for configuring and parameterize the CPU and the modules. • Using STEP 7 tools for Diagnostic & Troubleshooting of Faults on the PLC system • Handling analog modules and the processing of analog values. • Programming and using configurable blocks and employing conversion, arithmetic, shift and jump

instructions. • Be able to use extended functions for symbolic programming and interrupt-controlled program execution. • Configuring and implementing the homogeneous communication links via the MPI interface. Note: All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable controllers and plant model.

��


��



��!��"#�� (S7-NETPROFI DP) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.800.000,00 (include 10% VAT)

�

��+��,��&��-��,�*.��/

Target audience This course is aimed at planning design, application and service engineers who work on ETHERNET and PROFIBUS Network communication between PLC S7 with CP343/ CP443.

Pre-requisite knowledge Knowledge of SIMATIC S7 and basic communication concepts. Course objectives On completion of this course, the participant shall be able to: • Be familiar with design and structure of the ETHERNET/ PROFIBUS network and system. • Be able to connect different automation equipment to the ETHERNET/PROFIBUS network. • Be able to parameterize using S7-NETPRO and the CP343 / CP443 module and program a PLC-PLC

connection using TCP/IP and FDL or FMS mode. • Be able to use the test and diagnostic functions for ETHERNET / PROFIBUS Network. Course contents • General concept of ETHERNET / PROFIBUS and standard Application possibilities of FDL and FMS. • Using the S7-NETPRO for ETHERNET / PROFIBUS Application to parameterize the TCP/IP and FDL / FMS

connections. • The data transfer between CPU and CP343 / CP443 via the programming of Send–Receive block and Load

/ Transfer commands. • The Test and diagnostics function to analyze the ETHERNET and PROFIBUS Communication. • Operation of Integrated DP master of the CPU S7 300/400 series. • The data transfer between CPU and I/O modules or Field Devices on the slaves. • Application of PROFIBUS-DP for various ET200 series and Field Devices such as SIMOREG, SIMOVERT,

Siemens OP/TP, PG/PC etc. • The Test and diagnostics function to analyze the Profibus-DP Communication Note : All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable controllers and plant model.

�


��



�� (ST-WCCFSYS1) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.800.000,00 (include 10% VAT)

�

+��0��-(�1�'(�

Target audience This course is for personnel who want to work with WinCC Flexible for process visualization system, monitoring and controlling anything from individual machine to large installation and who want to consolidate and extend their knowledge on WinCC Flexible. Pre-requisite knowledge Sound knowledge of SIMATIC S5/S7 Basic, Maintenance and Trouble Shooting Course, PROFIBUS or Industrial Ethernet Network and Windows 2000/XP environment. Course objectives On completion of this course, the participant shall be able to: • Be capable of programming WinCC Flexible for operator-process visualization with fully graphical, object

oriented user interface with windowing techniques. • Be able to set up the bus connection with PROFIBUS or Industrial Ethernet. • Be able to connect to SIMATIC configuration world (signal list, programming device functions). Course contents • Communication setting from the Operator Station to the SIMATIC S7. • Graphical system for the visualization and control of fully graphical system pictures. • Alarm logging system for the entry, archiving and selective display of events. • Message representation, message archiving & message configuring. • Data Management system for archiving user data. • Measured value archiving with comprehensive display and control functions for curves (trends). Note: All topics are backed up by practical exercises.

��


��



�� (ST-BWCCS) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.800.000,00 (include 10% VAT)

�

��2��0��

Target audience This course is intended for configuring engineers, commissioning engineers, decision-makers and service personnel, or for personnel who want to work with WinCC for process visualization system, monitoring and controlling a process machine.

Pre-requisite knowledge Sound knowledge of SIMATIC S5/S7 Basic, Maintenance and Trouble Shooting Course, PROFIBUS or Industrial Ethernet Network and Windows 2000/XP environment. Course objectives On completion of this course, the participant shall be able to: • Be capable of programming WinCC for operator • process visualization with fully graphical, object oriented • User interface with windowing techniques. • Be able to set up the bus connection with PROFIBUS or Industrial Ethernet. • Be able to connect to SIMATIC configuration world (Signal list, programming device functions).

Course contents • Overview of the WinCC system. • Starting a project, connection to S7, and variable simulation. • Graphics Designer & graphic display for HMI. • Alarm display and alarm logging. • Curve display and tag logging. • User archives. • Report designer. • Background processing. • Practical exercises. Note: All topics are backed up by practical exercises.


��



��3�� (ST-PCS7SYS) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 10.450.000,00 (include 10% VAT)

�

��,��2��

Target audience Intended for configuring engineers/programmers, commissioning personnel, and operation personnel. Pre-requisite knowledge Basic knowledge of automation system and PLC S7 programming. Course objectives As a user of the Process Control System SIMATIC PCS7, the participant learns how to apply the engineering features in a structured and efficient way. Supported by examples and exercises, the process automation of a plant is realized up to the HMI level. Covered are aspects of SIMATIC PCS7, such as its system wide consistency, plant oriented, data and project management and the co-operation between the various components and tools. Course contents • System overview and architecture : subsystems for automation, operation, communication and engineering. • Configuring concept : from the field level up to the HMI level with integrated WinCC system. • Network and hardware configuration. • Process Object View as a plant based structure of the project. • Standardizing by library and block concept, Process tag types, Model. • Automation solutions by graphical configuration with CFC and SFC. • Monitoring and controlling. • Distributed engineering (Multi Project). Note: All topics are backed up by practical exercises.

�


��



��4� ��5��#"��2��2��%�� (DR02) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.250.000,00 (include 10% VAT)

�

2��2��3��

Target audience This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the SIMOREG series 6RA24/6RA70. Pre-requisite knowledge Basic knowledge of DC motors, of power devices and of control engineering. Course objectives On completion of the course, the participant should: • Be able to start up the converter. • Be able to adapt the parameters to the requirements of the drive. • Be able to record the parameters. • Diagnose faults, alarms and solve problems. Course contents • Explanation of the principle of operation. • Commissioning of the drive, parameterization and verifying of the controller-optimization. • Structure of the function diagrams. • Operating conditions, faults and alarms. • Function of the binary and analog input and outputs. • Reading and loading parameters with Drive Monitor program. • ‘Trace-buffer’ and Peer-to-peer’ function. • Practical training, based on selected applications. • Trouble-shooting. Note: All topics are backed up by hardware based exercises

�


��



�� #��"##�� (MM4) 3 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.250.000,00 (include 10% VAT)

�

��2��3��

Target audience This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the Micromaster Siemens inverter system. Pre-requisite knowledge Basic knowledge of AC motors, of power devices and of control engineering. Course objectives On completion of the course, the participant should: • Be able to start up the converter. • Be able to adapt the parameters to the requirements of the drive. • Be able to record the parameters. • Be able to carry out the commissioning of drives fed by converters of the Micro Master 420/440 Series. • Diagnose faults, alarms and solve problems Course contents • Discussion of the modular concept of the series Micro Master 420/440 (basic units, options). • Commissioning of a unit with discussion of special functions (setting of the parameters, optimization). • Drive Monitor (operation, programming, data transfer via PC). • Diagnosis, fault finding and fault localization. Note: All topics are backed up by hardware based exercises

��


��



�

��3��2��3�� 5�� (D60) 5 Days Course locations : Jakarta �(Other locations available on request) \ Price : Rp 8.250.000,00 (include 10% VAT)

�

��2��3��

Target audience This course is intended for : technicians, engineers or maintenance personnel who must project or maintain a SIMOVERT Master Drives System.

Pre-requisite knowledge Basic knowledge of AC motors, of power devices and of control engineering. Course objectives On completion of the course, the participant should: • Be able to start up the converter. • Be able to carry out the commissioning of drives fed by converters of the Series Master Drives, and • Diagnose faults to board level. • Be able to record the parameters. Course contents • Discussion of the modular concept of the series Master Drives (basic units, options). • Commissioning of a unit with discussion of special functions (setting of the parameters, optimization). • Module CUVC/Vector Control (frequency, speed, torque control). • Supplementary functions (automatic restart / generator buffering / restart on the fly / DC braking). • Modules CBP (Profibus communication to PLC). • Drive Monitor (operation, programming, data transfer via PC). • Diagnosis, fault finding and fault localization. Note: All topics are backed up by hardware based exercises

�


��



��%��$�� (DR SNS SI) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 8.800.000,00 (include 10% VAT)

�

��,��"4��

Target audience This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the SINAMICS S120 / SINAMICS G120 series. Pre-requisite knowledge On completion of the course, the participant should: . Course objectives On completion of this course, the participant shall be able to: • Be able to start up the converter. • Be able to adapt the parameters to the requirements of the drive. • Be able to record the parameters. • Diagnose faults, alarms and solve problems. Course contents • Design of the drive system and overview of documentation and service. • Start up and parameterization with the STARTER commissioning tool. • Structure of the function diagrams. • Diagnostics and troubleshooting. • Software function, closed-loop control and optimization

of Servo and Vector drives. • Startup of the integral basic positioner (EPOS) • Practical exercise on the Training Kit. Note: All topics are backed up by hardware based exercises

�


��



��&��$%��

�

� �(S5-S02) 5 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 7.700.000,00

�

� ��6

Target audience This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge of SIMATIC S5 programmable controller • Solving simple tasks with SIMATIC S5 controllers. • Using SIMATIC S5 to learn about the principle of operation and application of PLC. • Participating in extended of SIMATIC S5 courses. Pre-requisite knowledge This is an entry level course that requires knowledge of logic control technology and Windows system. Course objectives On completion of this course, the participant shall be able to:

• Know the components parts and the principle of operation of a SIMATIC S5 programmable controller and the rules governing handling of the hardware and programming of a SIMATIC S5.

• Understand the program structure of the high performance programmable controllers. • Be able to make simple program modifications. Be able to evaluate fault message on the programmable

controller, and to recognize and remedy errors in the program and at the inputs and outputs of the programmable controller, and make program documentation.

• Be familiar to work with EPROM/EEPROM memory sub-module, the design and structure of the SIMATIC S5 programmable controllers, sequence programming technique using GRAPH-5 software.

• Be able to design, write and load more complex programs using the PG, read system address, start-up the programs with various modes of operation, and fault handling block.

• Be able to program Analog Value Processing and work with the PID control algorithms of the S5115U and S5-135U controllers.

Course contents

• Error detection and handling procedures. • Organization blocks for restart, and operation mode, and analog value processing. • Program documentation exercises (assignment list, comments, footers, and print-out program). • Programming of EPROM/EEPROM sub-module. • Program structure of high performance SIMATIC S5, number representation, data formats, and data

blocks. • Supplementary STEP 5 operations with function blocks.

Note: All topics are backup by practical exercises using the Field PG / PC and the S5-100U / S5-115U / S5-135U in conjunction

�


��



��2�� &��

�

(ST-SIMO) 3 Days Course locations : Jakarta �(Other locations available on request) Price : Rp 7.700.000,00 (include 10% VAT)

�

��

Target audience This course is aimed at planning, design and start-up engineer. Knowledge and skills acquired in course of SIMOCODE PRO Engineering & Commissioning are consolidated and extended to enable the participants to write and start-up as well as how the devices are linked together via PROFIBUS network. Pre-requisite knowledge • Basic knowledge of switchgear and control gear. • Basic knowledge of AC Motor & its protection. • Basic knowledge of PROFIBUS network. Course objectives On completion of the course, the participant should: • Be familiar with the SIMOCODE PRO system function. • Be able to design, write and test many different ways in which these devices can be implemented. • Be able to use diagnostic function. Course contents • Overview SIMOCODE PRO functions (motor protection and control functions, monitoring and diagnostic

functions, logic functions). • Overview SIMOCODE PRO components (current detection modules, basic unit, expansion modules,

operator control modules, accessories). • Configuration SIMOCODE PRO in several applications. • Integration SIMOCODE PRO in S7 project via PROFIBUS network. • Integration SIMOCODE PRO in PCS7 project via PROFIBUS network. Note: All topics are backup by practical exercises using the Field PG / PC and the SIMOCODE PRO demo box in conjunction.


��



SITRAIN COURSE REGISTRATION FORM (PLEASE COMPLETE THIS FORM LEGIBLE OR IN CAPITALS, AND FAX TO ASN RC ICS SD TC +62 21 2754 3481)

COMPANY COURSE TITLE CONTACT PERSON COURSE CODE TELEPHONE STARTING DATE FAX VENUE EMAIL

NO PARTICIPANT

(NAME APPEARS ON CERTIFICATE) NATIONALITY JOB TITLE EMAIL ADDRESS

1

2

3

4

5

6

7

8

Terms and Conditions: - Course registration is on first-come-first-served basis. - Full payment has to be made before commencement of the course. - The participant is bindingly registered for the course after receiving the official course confirmation including the payment

information. o When canceling orders the following cancellation fees apply: o Within 3 weeks prior to the start date of the course, cancellation fees amount to 20% of the order value o Within 2 weeks prior to the start date of the course, cancellation fees amount to 50% of the order value o Within 1 week prior to the start date of the course, cancellation fees amount to 100% of the order value

- The Center reserves the right to reschedule a course in any event, and in such cases, course participants can choose to withdraw without penalty.

- Certificates will only be issued to participants with 75% attendance and course fee paid to Siemens. COMPANY CHOP, SIGNATURE, BILLING ADDRESS

NAME :____________________________

DATE :____________________________

SITRAIN Training Catalog

Documents

Transcript of SITRAIN Training Catalog