Signal Integrity Measurement Solutions · – With jitter Generation • ML4004-PAM ... to optimize...

SIG

NA

L IN

TEG

RIT

Y M

EASU

REM

ENT

SOLU

TIO

N

Signal Integrity Measurement Solutions

TP1

Bit Error Rate Tester • ML4039,ML4039B,ML4039A/ML4009

– 4x30 Gbps/1x30 Gbps BERT

• ML4039-JIT/ML4039B-JIT/ML4009-JIT

– BERT with Jitter Generation

• ML4039B-EQL/ML4009-EQL

– BERT with 9-Tap Emphasis

• ML4039-HV/ML4009-HV

– BERT with High Amplitude to 4V

• ML4039C

– 4x30G BERT with NRZ/PAM4 Support

Time Domain Analyzers • ML4004

– 3.1-5, 6.2-15 and 18.6-32 Gbps BERT

and 50 GHz BW DSO

• ML4004-JIT

– With jitter Generation

• ML4004-PAM

– 2x60 Gbps PAM4 BERT with 50 GHz BW

Scope

• ML4004-HV

– With High Amplitude to 4V

• ML4003B

– BERT and twin Scope combo

BERT

Module Compliance Board • CFP: ML4018

• CFP2-ACO: ML4027-ACO

• CFP2: ML4027 & ML4043

• CFP4: ML4049

• CFP8: ML4057

• MicroQSFP: ML4044

• QSFP28: ML4041-K & ML4021-K

• QSFP+: ML4021

• SFP28: ML4024

Host Compliance Board • CFP: ML4014

• CFP2-ACO: ML4028-ACO

• CFP2: ML4028

• CFP4: ML4052

• CFP8: ML4058

• MicroQSFP: ML4045

• QSFP28/QSFP+: ML4020 & ML4020-N

• SFP28: ML4023 & ML4023-N

Media Converter • CFP2 to QSFP28: ML4086

QSFP Analyzer • ML4054

Services • Compliance Test Suite

• Compliance Services

MCB

Digital Sampling Oscilloscope • ML4025/ML4006

– 4x50 GHz/1x50 GHz DSO

Optical Sampling Oscilloscope • ML4025C/ML4005C

– 4x10 GHz/1x10 GHz Optical Scope

• ML4005D

– 25 GHz Optical Scope

HCB Scope

TP4

SIG

NA

L IN

TEG

RIT

Y M

EASU

REM

ENT

SOLU

TIO

N

cPCI Chassis Based Instruments

Standalone Instruments

ATE Instruments

4-Lane Digital Sampling Oscilloscopes

ML4025-50 50 GHz Differential 4-Lane Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement

ML4025-32 32 GHz Differential 4-Lane Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement

ML4025C 9 GHz (12 Gbps) Optical /32 GHz Electrical, Differential 4-Lane Sampling Scope, 780-1600 nm

4-Lane Bit Error Rate Testers

ML4039 8.5- 15 and 21- 30 Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE

ML4039-JIT 8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control

ML4039-HV 8.5- 15 and 21- 30 Gbps BERT, High voltage output up to 4Vdiff

ML4039A-JIT 3.1-5, 6.2-15 and 18.6-32 Gbps BERT with Phase and Amplitude Modulation Jitter Generation, Skew Control

ML4039B 1 to 32 Gbps BERT continuous bit rate coverage and 4 independent time bases.

ML4039B-JIT 1 to 32 Gbps BERT continuous bit rate coverage and 4 independent time bases with jitter generation

ML4039B-EQL 1 to 32 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20dB range

ML4039C 3.1-5, 6.2-15 and 18.6-30 Gbps BERT and support NRZ & PAM4

BERT and Scope combo

ML4003B 1 to 32 Gbps BERT with SFP28 Port, 32 GHz DSO & 10GHz Optical Scope


ML4009 8.5- 15 and 21- 30 Gbps BERT for production testing, Pre-emphasis, Post-emphasis, Bathtub, Eye Contour, CTLE

ML4009-JIT 8.5- 15 and 21- 30 Gbps BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control

ML4009-HV 8.5- 15 and 21- 30 Gbps BERT with High voltage output up to 4Vdiff

ML4009-EQL 8.5- 15 and 21- 30 Gbps BERT with 9-tap equalizer characterization and pre-emphasis with 20 dB range

Time Domain Analyzers

ML4004 3.1-5, 6.2-15 and 18.6-32 Gbps BERT and 50 GHz DSO

ML4004-JIT 3.1-5, 6.2-15 and 18.6-32 Gbps BERT and 50 GHz DSO with jitter generation

ML4004-PAM 2x60 Gbps PAM4 BERT with 50 GHz BW Scope

ML4004-HV 3.1-5, 6.2-15 and 18.6-32 Gbps BERT and 50 GHz DSO with high amplitude up to 4 V


ML4005C 9 GHz (12Gbps) Optical /32 GHz Electrical Sampling Scope, 780-1600 nm

ML4005D 25 GHz (32Gbps) Optical /32 GHz Electrical Sampling Scope, 780-1600 nm

ML4006-50 50 GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement

ML4006-32 32 GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement


ML4025-ATE 32 GHz Digital Sampling Oscilloscope, Jitter Compensation, PAM4 measurement


ML4039-JIT-ATE 30 G BERT with Phase Modulation, Amplitude Modulation Jitter Generation, Skew Control

SIG

NA

L IN

TEG

RIT

Y M

EASU

REM

ENT

SOLU

TIO

N

Interconnect Test Products

Module Model # Description

CFP2 4x25G Passive MCB/Host

ML4027 4x25 Gbps, featuring 2.92mm connectors, current sense/limit monitor with low insertion loss of 1 dB at 14 GHz. Comes with Windows GUI

Breakout Module/ HCB

ML4028 10x10 Gbps and 4x28 Gbps with high-density connector rows featuring low insertion loss of 1 dB at 14 GHz

4x25G Retimed Loopback Module

ML4029 4x25-28 Gbps CDR, PRBS generator and detector, custom memory maps, input & DFE adaptation to optimize eye opening, loss of signal detection

10x10G Passive Loopback Module

ML4030-SR10 10x10 Gbps, low insertion loss of 0.56dB at 5.15 GHz. MSA compliant with programmable power dissipation from 3 W to 12 W


ML4030 4x25G, low insertion loss of 0.56 dB at 5.15 GHz. MSA compliant with programmable power dissipation from 3 W to 12 W

10x10G Passive MCB/Host

ML4042 10x10 Gbps, current sense/limit monitor with insertion loss of 0.65 dB at 5.15 GHz. Comes with Windows GUI

10x10G Retimed Loopback Module

ML4043-SR10 10x10-14.5 Gbps, customized memory maps, input & DFE adaptation to optimize eye opening, loss of signal detection, wide range CRU and programmable output level

4x32G ACO Passive MCB/Host

ML4027-ACO 4x25 Gbps, MSA compliant master, current sense with 2.92 mm connectors, provide an easy solution for programming CFP2-ACO


ML4028-ACO 4x32 Gbps, 40 GHz with high-density connector featuring an insertion loss of 2.4 dB at 16 GHz


ML4030-ACO 4x32 Gbps, MSA compliant housing offering heat dissipation up to 12 W, programmable to different power levels


ML4030-LR4 4x25 Gbps, MSA compliant housing offering heat dissipation up to 12 W, programmable to different power levels

CFP

Passive MCB/Host ML4018 10x10 Gbps, current sense/limit monitor with insertion loss of 0.65 dB at 5.15 GHz. Comes with Windows GUI


ML4014 Featuring a low insertion loss of 0.625 dB at 5.13 GHz

Passive Loopback Module

ML4013 10x10 Gbps, MSA compliant, programmable power dissipation up to 40 W, customized memory maps and an insertion loss of 0.5 dB at 5.15 GHz

CFP4

Passive MCB/Host ML4049 4x28 Gbps, featuring 2.92 mm connectors, with low insertion loss, programmable power supply for four corner testing

Breakout Module ML4052 4x28 Gbps, high-density connector rows with low insertion loss


ML4050 4x28 Gbps, customized memory map, MSA compliance, programmable power dissipation up to 8 W and a low insertion loss of 0.56 dB at 5.15 GHz

Retimed Loopback Module

ML4051 4x28 Gbps, customized memory maps, input & DFE adaptation to optimize eye opening, loss of signal detection, wide range CRU

SIG

NA

L IN

TEG

RIT

Y M

EASU

REM

ENT

SOLU

TIO

N

CFP8

Passive MCB/Host ML4057 Supports 16x25 Gbps, 8x50G PAM and CFP8-ACO, MDIO MSA compliant master, 2x8 40GHz Huber & Suhner _2x8A_81_MXP-S50-0-3-111_N Connectors and a user friendly GUI for MDIO control

Breakout Module/HCB

ML4058 OIF compliant HCB, supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO. Extends MDIO and control interface to SMA Connector and measured S-Parameters for each module


ML4059 Supports 16x25 Gbps, 8x50 Gbps PAM and CFP8-ACO, Superior SI performance and supports 28 Gbps Analog Coherent.

QSFP-DD Passive Loopback Module

ML 4062 Supports 8x50 Gbps electrical interface, built with advanced PCB material and programmable power dissipation up to 14 W

MicroQSFP

Passive MCB/Host ML4044 Supports 4x28 Gbps interfaces.,40 GHz Grooved 2.92 mm K connectors, and high performance signal integrity traces from K connectors to uQSFP host connector

Breakout Module/HCB

ML4045 High Performance signal integrity traces and supports 4x28 Gbps TX & RX Lanes


ML4046 Support 4x28 Gbps, I2C slave interface compliant with SFF 8679, programmable power dissipation up to 5 W and high performance signal integrity traces

QSFP28

Passive MCB/Host ML4041-K 4x28 Gbps, 2.92 mm connectors, current sense/limit monitor with low insertion loss of 1.4 dB at 15 GHz. Comes with Windows GUI


ML4020 4x28 Gbps, high-density connector rows with low insertion loss


ML4002-28 MSA Compliant, programmable power dissipation up to 6 W

ML4012-28-LC Low cost MSA Compliant Loopback Module featuring superior signal integrity

ML4002-28-C5 Power dissipation up to 5 W, with programmable power ramp up

Retimed Loopback ML4048 4x25 Gbps, MSA Compliant, customized memory maps, input & DFE adaptation to optimize the eye opening

QSFP+

Passive MCB/Host ML4021 4x14 Gbps, MSA compliant functionality, current monitoring and a programmable power supply


ML4002 4x14 Gbps, programmable power dissipation and an insertion counter

CXP

Passive MCB/Host ML4022 12x10 Gbps, MSA compliant functionality, current monitoring and a programmable power supply

SFP28

Passive MCB/Host ML4024 28 Gbps, 2.92 mm connectors, current sense/limit monitor with low insertion loss of 1.4 dB at 15 GHz. Comes with Windows GUI


ML4023 28 Gbps, high-density connector rows with low insertion loss


ML4023-N 28 Gbps, high-density connector rows with low insertion loss


ML4026-28 MSA Compliant, programmable power dissipation up to 6 W

SIG

NA

L IN

TEG

RIT

Y M

EASU

REM

ENT

SOLU

TIO

N

MEDIA CONVERTER

ML4086 CFP2 to QSFP28, MSA compliant adapter

QSFP Analyzer

ML4054 Combination of a dual 4-lane BERT with two QSFP28 MCBs, Ultra Compact: Stand Alone. Tests QSFP28 transceivers and cables, handles data Rates: 3.1–5, 6.2–15 and 18.6 – 30.2 Gbps and air-tight and robust shell. Low Cost.

SERVICES

Compliance Test Suite

OIF-CEI 3.1 or CAUI-4

Reduce your DUT testing time from days to less than an hour with the ML automated compliance test suite. Comes in two flavors: IEEE802.3bm or OIF-CEI 3.1

Compliance Services Send us your DUT and we do the compliance tests for you and generate a comprehensive report

Worldwide MultiLane SAL Houmal Technology Park 141 Main Road Houmal, Lebanon +961 5 941668 Website: www.multilaneinc.com E-mail: [email protected]

North America & Europe

MultiLane Inc 2000 Wyatt Drive, Suite 6 Santa Clara CA 95054 USA +1 408 890 2234

Asia MultiLane Asia Inc No. 18, Prosperity Rd. 2 Hsinchu Science Park, 30078 Taiwan +886 3 6686667

http://www.multilaneinc.com/

mailto:[email protected]

Signal Integrity Measurement Solutions · – With jitter Generation • ML4004-PAM ... to optimize...

Documents

Transcript of Signal Integrity Measurement Solutions · – With jitter Generation • ML4004-PAM ... to optimize...