Side Entry Ball Valves - Flocontrol...When the ball is in fully closed position, two trunnions...
Transcript of Side Entry Ball Valves - Flocontrol...When the ball is in fully closed position, two trunnions...
A Long Experience in Energy Equipment and one Goal:
S ide Entr yBal l ValvesType 54 & 55
The Customer ’s sa t i s fac t ion .
VALVITALIA is an Italian Group of valves and other energy equipment manufacturers created to provide to the customers complete packages of products and services.Italy historically has been the Country with the largest number of valves and other energy equipment manufacturers. Also, Italy hasprovided to the oil & gas companies excellent engineering services. Experienced management, quality, performance, availability of large inventory and full dedication to the customer’s satisfaction differentiate VALVITALIA from the competition.VALVITALIA can provide discrete products and/or complete packages, including actuators, gear operators, pre-assembled skidsfor gas regulating e metering stations.Among the pre and post salesservices, VALVITALIA offers the refurbishment of any type of valve.The availability of stocks represents an additional service to the customers, very difficult to find elsewhere.
2
VALVITALIA PAVIA PLANT
Offer the best product at a competitive price and to respect agreed delivery times is our commitment.
VALVITALIA reserves the right to change design, specification and materials without notice
STANDARD FEATURES Type 54 Type 55 COMMENTS
Type 54
Type 55
3
TECHNICAL FEATURES
Trunnion mounted ball valve
When the ball is in fully closed position, two trunnions absorb the side thrust generated by line pressures, preventing excess friction between ball and seats. With this system, even at full rated working pressure, operating torque stays low. Therefore a generous sizing of trunnions is essential to the life and operability of the valve.The spherical surface is machined and ground to close tolerance. To reduce torque and minimize wear, the ball is then electrolessnickel plated and polished to mirror finish. For special applications the ball may be hardfaced with T.C.C. (Tungsten carbidecoating) to improve resistance to wear and prevent scratching caused by hard particles.
TYPE 54 TYPE 55
Size range 1 1/2” FB up 6” FB up Special sizes available to 6” RB to 60” on request
PressureANSI 150÷2500 1ANSI 150÷2500
e API 6A e API 6AThree piece split body YES YESAnti-static device YES YESSelf relieving seats YES NO 55-option (no extra cost)Double Piston Effect seats NO YES 54-option (no extra cost)Lubricated stem YES YESLubricated seat NO YES 54-option(*)Double block and bleed YES YESMetal to metal seats YES (*) YES (*)Trunnion mounted ball YES YESFull or Reduced bore YES YESBi-directional YES YESMinimum thickness ASME B16.34 YES YESRF or RTJ flanges to ASME B16.5 YES YES Other flange design(*)BW (butt-weld) ends to ASME B16.25 YES YES Other code for BW design(*)Bore and end-to-end YES YES Dimensions other than API 6D(*)Manufacture in accordance
YES YESASME B 16.34 design
with API spec. 6D available on request(*)Materials certification to EN10204
Type 3.1.C materials type 3.1.B for pressure containing YES YES
certification level (*)parts, ball, stem and seatsFire safe design to
YES YESOther fire safe code
API 6FA (BS 6755 Pt. 2) (e.g. API 607)(*)Bolting ASME VIII div. I YES YES ASME 16.34 available (*)Operation by lever, gear w/
YES YEShandwheel or actuator
Ease of main0tenanceType 54/55 design requires valve removal from line in order to perform maintenance.
(*) available with extra cost
VALVITALIA reserves the right to change design, specification and materials without notice
4
TECHNICAL FEATURESEmergency stem and seat sealant injectionIn case of emergency, when sealing materials (seat sealing and stem o-ring) are damaged or decom-posed by fire or other accidental causes, a sealant injection into fittings on both stem and seat preventsleakage until the primary seal is restored. For Type 54 ball valve the seat sealant injection is an optional feature available with an extra cost.. However, the material between ball and seat is athermoplastic, thus no further injection is necessary. Self lubricated, low friction materials is used forstem bearings, stem seals and body seats. Low friction materials, e.g. nylon, are used for seat inserts. Stem bearings and self-lubricating seals give predictable operating torque for the life of the valve.
StemThe stem is made separately from the ball. It is blow-out proof, property obtained with an integral collar in the bottom of the stem.
Stem SealSealing system can be defined triple: two static o-rings seal the stem, plus a third graphite retained bythe adaptor flange. This ultimate seal can be replaced when the valve is in line and in closed position.
Fire safe design and testFire safe is standard design of all Valvitalia ball valve. Two o-ring and gland gasket prevent leakpaths from the valve stem area, o-ring and body gasketprevent leakage through the valve body. If fire deteriorate o-ring, gland gasket, body gasket andthe stem firesafe packing prevent fluid or gas leakage.Valvitalia soft seat ball valve fire safe test(shown in the image) was witnessed and certified according to API 607 - API 6 FA - BS 6755 pt.2.
Anti-static deviceThis device is a standard feature of VALVITALIA ball valves. A coil spring thrusts a little sphere,providing earthed continuity between stem and other metallic components of valve (ball andbody) in order to avoid sparks during tuning of the stem for opening and closing the valve andprevent problems in case of use with flammable fluids and gas.
Seat designType 54 ball valve: plastic polymer insert for seat sealing, spring energised.Type 55 ball valve: primary metal-to-metal seal and secondary synthetic o-ring seal, spring energised.
Body designVALVITALIA trunnion mounted valves have a compact and streamlined body for maximum strength andminimum weight. Uniform fine grain and structure and toughness is assured by forged steel.
Type 54
Type 55
Double barrier on body jointsVALVITALIA valve design assures double barriers for all leakpaths. In this way, when one fails, theother seals.
VALVITALIA reserves the right to change design, specification and materials without notice
5
TECHNICAL FEATURES
Body vent and drainThe drain and vent plug of the valve body enable to check the integrity of the seat ring. A bleed valve may replace the drain plug.
Double block and bleedVALVITALIA design of a valve with two seating surfaces between which the cavity can be vented trough a bleed connection andthus confirm the tightness of the valve, as well in closed position as open position, when pressure is applied to any side or bothsides of the valve.
Double piston effect (55-standard, 54-option)With the DPE seat configuration when there is a leakage in the upstream seat, the pressure entering into the body cavity pushesthe downstream seat against the ball and the valve seals. This effect is a sealing principle involved in utilising line pressure to effect a seal across the floating seat.
First barrier Second barrier
A relief valve is recommended to be installed to protect the body cavity from excess pressure.
First barrier Second barrier
Self relieving seatIn self relieving condition, excessive internal body pressure is automatically relieved both in upstream and downstream line by forcing the seats away from the closure element.
VALVITALIA reserves the right to change design, specification and materials without notice
6
STOP COLLARBEARING HOUSINGTRUNNION O-RINGTRUNNION BEARINGSTEM PINSTEM BEARINGLOWER TRUNNION CAPSCREWLOWER TRUNNIONLOWER TRUNNION F.S. SEALRELIEF VALVERETAINING RINGBODY O-RING STEM GREASE FITTINGDRAIN PLUGSEAT SPRINGSEAT RING WITH INSERTUPPER THRUST WASHERADAPTER PLATESTEM F.S. SEAL
TOP COVER F.S. SEALCLOSURE F.S. SEALTOP COVER O-RINGSEAT GASKET O-RINGSTEM O-RINGBEARING HOUSING CAPSCREWADAPTER PLATE CAPSCREWTOP COVER CAPSCREWBODY STUD NUTBODY STUDGLAND BUSHINGTOP COVERSTEMBALLCLOSUREBODY
Fe 360A-105VITONDRY BEARING42CrMo4DRY BEARINGA-193-B7A-350-LF2GRAPHITEA-182-F316A-350-LF2VITONAISI 101842CrMo418-8A-350-LF2 + PTFE CCGDRY BEARINGFe 410GRAPHITEGRAPHITEGRAPHITEVITONVITONVITONA-193-B7A-193-B7A-193-B7A-194-2HA-193-B7AISI 1018A-350-LF242CrMo4 (AISI 4140)A-350-LF2A-350-LF2A-350-LF2
33
1
1
1-2
4
34
1
11
61605958575352515045473930282725b222019181615141210a10987654321
Pos. Description Material Notes
STEM PINU-CUP PACKINGRELIEF VALVECHECK VALVEPULLER BUSHINGPULLER CAPSCREWSEAT GREASE FITTINGBODY O-RING ANCHOR PINBEARINGBEARING RETAINERGREASE FITTINGVENT PLUGDRAIN PLUGSEAT SPRINGINNER SEAT RINGOUTER SEAT RINGLOWER THRUST WASHERUPPER THRUST WASHERSTEM KEYADAPTER PLATETOP COVER O-RINGSEAT GASKET O-RINGSEAL O-RINGSTEM O-RINGADAPTER PLATE CAPSCREWTOP COVER CAPSCREWBODY STUD NUTBODY STUDGLAND BUSHINGTOP COVERSTEMBALLCLOSUREBODY
42CrMo4 (AISI 4140)VITONA-182-F316AISI 1018AISI 10188-8 (SAE 1034)AISI 1018VITONC25 (AISI 1025)DRY BEARINGFe 510AISI 101842CrMo4 (AISI 4140)42CrMo4 (AISI 4140)18-8A-350-LF2A-350-LF2Fe 360 + P.P.S.Fe 360 + P.P.S.42CrMo4 (AISI 4140)Fe 410 (A-283)VITONVITONVITONVITON8-8 (SAE 1034)8-8 (SAE 1034)A-194-2HA-193-B7AISI 1018A-350-LF2C40 (AISI 1040)A-350-LF2A-350-LF2A-350-LF2
11
20
1
1-211-24
5748454443424139363332302928272625232221201514131210987654321
Pos. Description Material Notes
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS. - 20) NYLON FOR CLASS 1500.21) 42CrMo4 (AISI 4140) AS ALTERNATIVE - 24) A-694-F65 AS ALTERNATIVE
SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGNTEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)
STD. MATERIAL SELECTIONType 54
Type 55
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS.2) NYLON INSERT ON CLASS 900/1500 3) FOR LEVER OPERATED VALVES4) FOR GEAR OR ACTUATOR OPERATED VALVES
SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGNTEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)
VALVITALIA reserves the right to change design, specification and materials without notice
7
STD. MATERIAL SELECTION
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP
AISI 4140 + ENPB7 / 2H
PTFE VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2AISI 4140 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENPASTM A350 Gr.LF2 + ENP
AISI 1040 + ENPB7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
AA
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for general service (sweet fluids) FULL CARBON STEEL
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2HPTFE
VITONINCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
A 182 F316 LN + ENPA 182 F316 LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENPB7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
CC
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) STAINLESS STEEL TRIM
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HPTFE
VITONINCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENP
A 182 F6NM + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
DD
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for highly corrosive services 13% Cr. STAINLESS STEEL TRIM
150-1500-29O + 180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2HPTFE
VITONINCONEL X 750
2500-29O / + 180OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENP B7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
EE
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) FULL STAINLESS STEEL VALVE
VALVITALIA reserves the right to change design, specification and materials without notice
8
STD. MATERIAL SELECTION
150-1500-29O + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H
PTFEVITON
INCONEL X 750
2500-29O / + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H NYLONVITON
INCONEL X 750
150-1500-29O + 180OC
A 182 F51A 182 F51
A 182 F51 + ENPA 182 F51 + ENPA 182 F51+ ENP
B7 / 2H VITON VITON
INCONEL X 750
2500-29O / + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H NYLONVITON
INCONEL X 750
FF
RatingTemperature
BodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) FULL DUPLEX STEEL VALVE
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
L7 / Gr.7 PTFE
PTFE + ELGILOYINCONEL X 750
2500-49O / +180OC A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENPL7 / Gr.7
VITONPTFE + ELGILOYINCONEL X 750
2500-49O / +180OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
GG
RatingTemperature
BodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for low temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-196O +120OC A 182 F316A 182 F316
A 182 F316 + ENP A 182 F316 + ENP
XM 19 + ENP(A 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENPINCONEL 718 + ENP
A 453 Gr.660 KEL-F
PTFE + ELGILOYINCONEL X 750
150-1500-196O +120OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
LL
RatingTemperature
BodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for cryogenic temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
INCONEL 718 + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
INCONEL 718 + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
MM
RatingTemperature
BodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for high temperature
Alternative material selections available upon request.
VALVITALIA reserves the right to change design, specification and materials without notice
9
383851517676
102102
191216216283283305305457
165178178203203229229394
178191191216216241241406
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727272727
125125125125125125125125
130130145145200200200200
270270320320420420520520
33333333
1012152235375267
1215202540446370
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
CLASS 150 full bore valves are supplied with compact design
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE54
383851517676
102102
191216216283283305305457
191216216283283305305404
203203232298298321321419
100100105105130130155155
110110120120145145170170
120120120120120120120120
2727272727272727
125125125125125125125125
130130145145200200240240
270270370370570570660660
33333333
1012152238395673
1618213251547599
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75 bar)
TYPE54
383851517676
102102
241292292356356406406495
241292292356356406406495
241295295359359410410498
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727273535
125125125125125125125125
130130145145200200240240
270270370370570570660660
33333355
1214172440457780
19222535556385
125
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE54
BALL VALVES TYPE 54 (Overall Dimensions)
383851517676
102102
241292292356356432432559
241292292356356432432559
241295295359359435435562
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727273535
125125125125125125125125
130130145145200200240240
300300430430670670760760
33333355
1214182542507285
192226375774
101150
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE54
VALVITALIA reserves the right to change design, specification and materials without notice
10
BALL VALVES TYPE 54 (Overall Dimensions)
383851517676
102102
305369369381381457457610
305369369381381457457610
305372372384384460460613
100100115115145145175175
115115125125155155195195
120120120120135135168168
2727272735354242
125125125125125125250250
130130160160210210260260
400400600600900900
--
33335599
202234486970
145147
3143586483
107162207
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE54
383851517676
102102
305369369470470546546705
305369369470470546546705
305372372473473549549711
100100115115145145175175
115115125125155155195195
120120120120135135168168
2727272735354242
125125125125125125250250
130130160160210210260260
400400600600900900
--
33335599
202234486972
146151
3143587597
129166270
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE54
3232444464648989
133133
384451451578578673673914914
1022
384451451578578673673914914
1022
387454454584584683683927927
1038
100100110110140140250250290290
140140160160185185200200235235
120120135135168168185185250250
27273535424250505050
125125125125250250300300500500
204235235305305356370483483553
335599
15152828
40447098
162168322332675860
6286
118152218282362570750990
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
6”8”x6”x8”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE54
Type 54 Class 2500 ANSI
VALVITALIA reserves the right to change design, specification and materials without notice
11
BALL VALVES TYPE 55 (Overall Dimensions)
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
457521521559559635635838762838991914991
1143®
114313971245134613971727152416261727®
®
®
®
®
®
394457457533533610610762686762914864914
1067®
106712951143124512951524137214731524®
®
®
®
®
®
406470470546546622622775699775927876927
1080®
1080®
®
®
®
®
®
®
®
®
®
®
®
®
®
305305340340380380420420470510510545590590635670670720755805805845875910
100010351135118013401435
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
135135168168185185185185250250250275310310310355355415415415415415415500500500500500518518
35354242505050505050505066666665658686757575759696969696
118118
125125250250300300300300500500500500600600600600600600600600600600600600600600600600700700
305400400465465550550675585675835760835990920990
12351060114012351445129513601445162517151895197022852450
5599
1515151528282842676767
104104170170178178178178273273273273273710710
165185285305365385595705696896
100113421752183221653018354835684278526859585930640082009470
11200®
®
®
®
175195310325395415635745746946
109614221832191222353598363836484378537860586050660084009970
11800®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE55
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
457457521521559559635635762838838914991991
1092114311431245134613971397152416261727®
®
®
®
®
®
403403502502568568648648762838838914991991
1092114311431245134613971397152416261727®
®
®
®
®
®
419419518518584584664664778854854930
101010101114116511651270137214221422155316541756®
®
®
®
®
®
305305340340380380420420470510510545590590635670670720755805805845875910
100010351135118013401435
215215255255295295345345375415415460430430540575575625660700700740785825905970
1080113012801400
168168185185250250250250250275275310355355415415415415415500500500500500500500500500518518
4242505050505050505050666565868686757596969696969696
118118118118
250250300300500500500500500500500600600600600600600600600600600600600600600600700700700700
318405405470470555555680595680845770845
1000930
100012501070115012501460131013701460164017301915199023052475
99
15152828282828424267
104104170170170178178273273273273273273273710710710710
185195325345475505606716812937
119214301958224825483058394840504900570060006680735075509360
11090®
®
®
®
195205335365495545646806902
117213921620220824482798350841984450525060506350702077008010
1059012545
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
559660660787787838838991889991
11941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
559660660787787838838991889991
11941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
562664664791791841841994892994
12001095120014071305140716641461156216642099179419462099®
®
®
®
®
®
310310350350390390430430480525525565605605650690690740775830830870900940
103010701170121513801475
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
168168250250250250275275310355355415415415415415415500500500500500500518518518518518660660
4242505050505050666565868686757575969696969696
118118118118118150150
250250500500600600600600600600600600600600600600600600600600600600600700700700700700700700
356420420508508565565695605695860785860
1020950
102012751095117512751490133514001490167517651950203023552525
99
28282828424257
104104170170170178178178273273273273273273710710710710710
11601160
190240385395431496719996922
11802380171824682798276036504200419049905740794085909590®
®
®
®
®
®
®
245290455485571666867
114610921450256025482648304830704000495050906190699090909940
10790®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE55
12
BALL VALVES TYPE 55 (Overall Dimensions)
153153204204254254305305337388388439489489540591591635686737737782832877978
10231118116913841461
496597597674674762762902826902
1055978
105512321143123215241309139715241880165117781880®
®
®
®
®
®
496597597674674762762902826902
1055978
105512321143123215241309139715241880165117781880®
®
®
®
®
®
499601601677677766766905829905
1061982
106112421153124215371321141015371896166717941896®
®
®
®
®
®
310310350350390390430430475520520560600600645685685735770825825865895930
102010551160120513701460
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
168168185185250250250250275310310355415415415415415415500500500500500500518518518518518660
424250505050505050666665868686868675969696969696
118118118118118150
250250300300500500500500500600600600600600600600600600600600600600600600700700700700700700
318410410475475560560685600685855780855
1010940
101012601085116012601475132513851475165517501935201023302500
99
151528282828306767
104170170170170170178273273273273273273710710710710710
1160
180235295260480605685946902
109714621485190523142587285938504200500057126462651167277590®
®
®
®
®
®
210260340450570700776
1037997
127716421723222326322894324641004550540063717053695476598545®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
13
BALL VALVES TYPE 55 (Overall Dimensions)
152152203203254254305305324375375425473473524572572619667714714762810857956
100611021149
610737737838838965965
1130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
610737737838838965965
1130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
613740740841841968968
1140103811401334123213341568®
1568®
®
®
®
®
®
®
®
®
®
®
®
250250290290345345390390450500500550595595655700700760810835835910960
10201120120012801330
245245275275320320365365390430430490530530560620620670710755755815850885970
106011101150
185185250250275275310310355415415415415415500500500500500518518518518518518518660660
50505050505066666586868675759696969696
118118118118118118118150150
300300500500500500600600600600600600600600600600600600600700700700700700700700700700
381470470547547610610770680770920850920
111010301110136012001290136016351460155016351810190020702160
1515282842425757
104170170170178178273273273273273710710710710710710710
11601160
235280351451742867992
1252114414381703206324352855300037454370543074059570®
®
®
®
®
®
®
®
325405476546892
10421142142214891858242326533160420040005090618067508730
10990®
®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE55
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
14
BALL VALVES TYPE 55 (Overall Dimensions)
181225267311352397438
10221270142215751683®
®
®
10381292144515971702®
®
®
711841841
10001000114611461407
385435500580670740825950
395465525630720810900
1020
310355415415641641641912
66658675969696
118
600600600600600600600700
660790870990
1100121513251325
67104170178273273273710
1660249034504260514072009720®
197029904130509061608630
11640®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
8”10”12”14”16”18”20”24”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE55
146146194194241241289289318362362407451451502534534597641686686730775819
705832832991991
113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
705832832991991
113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
711841841
10001000114611461407127614071686155916861971®
1971®
®
®
®
®
®
®
®
320320375375445445500500580640640705760760840895895975
104010701070116512301310
280280330330395395425425500560560590725725770815815905945
10351035106011401180
250250250250310310355355355415415415500500500500500518518518518518518518
5050505066666565658686759696969696
118118118118118118118
500500500500600600600600600600600600600600600600600700700700700700700700
430540540655655770770990680990
11801090118014251320142514801530165017301800187019852100
282828285757
104104104170170178273273273273273710710710710710710710
376406437487737792
10891144233835584248480072509200®
®
®
®
®
®
®
®
®
®
466596672837
109212321535205330714498554860008500
10400®
®
®
®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
Underground Installation• Stem extension can be required for VALVITALIA
ball valve. • This feature permits use of valves in remote area, e.g.
for underground installation. • VALVITALIA can provide any kind of stem extension,
with piping and fittings suitable to raise the body drain, the body vent and the emergency sealant injection fittings up the stand floor.
Subsea service• Special materials and protective overlays
for extended life of service.• Reliable product in order to provide long lasting service
without maintenance.• Additional sea water gaskets protect stem and external
sealing areas.• Special protective coatings and special sealing
caps protect body and bonnet bolts.
SPECIAL APPLICATIONS
15
Cryogenic service• Use range up to minus 196 °C. • Assure the maneuverability at low temperature.• Materials and dimensions are specially
designed to suit low temperature.
Gas test facilities
VALVITALIA reserves the right to change design, specification and materials without notice
A Long Experience in Energy Equipment and one Goal:
The Cus tomer ’s sa t i s fac t ion .
04-1
0 - 1
000
- VLT
.SDE
.02
Rivanazzano (PV) Plant
VALVITALIA S.p.A.Via Tortona, 69 - 27055 Rivanazzano (PV) Italy
Phone: +39.0383.945911 - Fax: +39.0383.9459962E-mail: [email protected]
Web site: www.valvitalia.com