Sheets Firsty Nov2012
-
Upload
renee-humphrey -
Category
Documents
-
view
215 -
download
0
Transcript of Sheets Firsty Nov2012
-
8/13/2019 Sheets Firsty Nov2012
1/5
FTCen/1-109/11/2012
1
Sole distributorROUTE DU LOIR / F-13250 SAINT CHAMASTEL. +33 (0)4 90 44 36 10 / FAX. +33 (0)4 90 44 36 11
www.armaturis.com
-
8/13/2019 Sheets Firsty Nov2012
2/5
FTCen/1-209/11/2012
Sole distributorROUTE DU LOIR / F-13250 SAINT CHAMASTEL. +33 (0)4 90 44 36 10 / FAX. +33 (0)4 90 44 36 11
www.armaturis.com2
Quality assuranceA fabrication process under continuous monitoring compounded by simple and reliable assembly procedures
ensure the high quality and safety of our rebar couplers, from fabrication to installation.
The Firsty range of couplers is the economical solution of theHrisson rangeManufactured in large quantities, the Firsty coupler, with its simple form, offers a high-performance and affordable constructive system.
A rebar coupler is more resistant than the bar itselfThe coupler always breaks along the bar during destructive tests.
A rebar coupler fully compliant with the standards and commendations
Rebar threading
Threading is achieved following cold upsetting of therebar ends to increase the nominal diameter.
Threading by rolling maintains the steel fibres,which ensure the coupler has excellent resistance.
Rebar resistance is therefore not affected by thethreading operation.
specifc geometry design (ISO Screw Threads)
specifc patented machinery
strict inspections
specialised workshops Rolled thread Machined thread fibre maintained fibre broken
1.
2.
3.
4.
Cold upsetting
Rough turning
Thread rolling
-
8/13/2019 Sheets Firsty Nov2012
3/5
FTCen/1-309/11/2012
3
Sole distributorROUTE DU LOIR / F-13250 SAINT CHAMASTEL. +33 (0)4 90 44 36 10 / FAX. +33 (0)4 90 44 36 11
www.armaturis.com
-
8/13/2019 Sheets Firsty Nov2012
4/5
FTCen/1-409/11/2012
Firsty
Firsty coupler specications
12 16 20 25 32 40
B=coupler length (mm) 36,00 44,50 52,85 65,65 77,50 96,50
D=overall diameter (mm) 19,50 26,50 32,50 40,50 50,50 60,50 Description CFI12 CFI16 CFI20 CFI25 CFI32 CFI40
Colour codes*
4
* used on locknut wrenches, checking tools, thread protection, etc.
The range
Sole distributorROUTE DU LOIR / F-13250 SAINT CHAMASTEL. +33 (0)4 90 44 36 10 / FAX. +33 (0)4 90 44 36 11
www.armaturis.com
D
B
Firsty coupler
-
8/13/2019 Sheets Firsty Nov2012
5/5
FTCen/1-509/11/2012
Installation Inspection
Step 1:1stphase installation
X The cap is correctly in place on the coupler.
1stphase concretingStep 2:put 2ndphase rebar in position
Step 3:screw on 2ndphase rebar
Step 4:locking the liaison
X For dia. 25 and greater: L 0.80 m.
At this stage of assembly the Firsty rebar coupler guarantees the safety of the liaison.
Standard assembly
Fastening accessoryif required
The 2ndphaserebar can bescrewed in
(a wrench can be usedto facilitate the operation)
Screw in by hand
Remove threadprotecting caps
Using the wrench,to lock rebar
Sole distributorROUTE DU LOIR / F-13250 SAINT CHAMASTEL. +33 (0)4 90 44 36 10 / FAX. +33 (0)4 90 44 36 11
www.armaturis.com5