| t: 800-348-7706 | f: 866-442-8406 | e: commercial@timberblinds.comwww.timberblinds.com/commercialdivision

SHEERWEAVE BASIC3% | 5%

ROLLER SHADE FABRICS

CARE & CLEANRemove dust with a vacuum cleaner or compressed air. Do not scrub. Do not use solvents or any abrasive substance which might damage the coating of the fabric. Clean with a sponge or a soft brush dipped in soapy water using mild detergent. Rinse with clean water. Leave the blind down until completely dry. You can also very gently rub the fabric with a clean white pencil eraser to remove small stains.

®

P02 WHITE

P05 WHITE/PLATINUM

V22 CHARCOAL/GRAY

P04 WHITE/BONE

V21 CHARCOAL

V24 CHARCOAL/CHESTNUT

OPENNESS FACTORS3% & 5%

COMPOSITION38% Fiberglass, 62% Vinyl on Fiberglass

WIDTH98” (250 CM)

WEIGHT3%: 16.4 oz/yd2 (556 g/m2) 5%: 14.1 oz/yd2 (478 g/m2)

THICKNESS3%: .025” (0.64 mm) 5%: .022” (0.56 mm)

STANDARD PACKAGINGRolls of 30 ly (27 lm)

FIRE CLASSIFICATIONSCalifornia U.S. Title 19 (small scale), NFPA 701-2004 TM#1 (small scale), NFPA 101 (Class A Rating), IBC Section 803.1.1 (Tested in accordance to ASTM E84) Class “A” rating, BS 5867 2008 Part 2 Type B Performance, CAN/ULC-S 109-03 (large and small scale), ASTM E 84 (Class 1), NFPA 701 TM#2 (large scale) and CAN/CGSB2-4.162-M80

ENVIRONMENTAL BENEFITSGREENGUARD & GREENGUARD Gold Certified, RoHS/Directive 2002/95/EC, US Consumer Product Safety Commission Section 101, ANSI/WCMA A 100.1-2007 for lead content and REACH (EC 1907/2006) compliant

BACTERIAL & FUNGAL RESISTANCEASTM E 2180, ASTM G21 AATCC30 Part 3, ASTM D 3273, GREENGUARD Mold and Bacteria Standard ASTM 6329; includes Microban antimicrobial additives

FABRIC SPECIFICATIONS

| t: 800-348-7706 | f: 866-442-8406 | e: commercial@timberblinds.comwww.timberblinds.com/commercialdivision

ROLLER SHADE FABRICS

®

FENESTRATION DATA

TS - Solar Transmittance, RS - Solar Reflectance, AS - Solar Absorption, TV - Visual Transmittance *SHGC = Solar Heat Gain Coefficient *1/4 CL = 1/4" Clear Glass, 1 HA = 1" Heat Absorbing Glass *Fabrics Installed Internally, Zero-Degree Profile Angle *Solar Heat Gain Coefficient (SHGC) shown calculated according to Office of Building Technology, State and Community Programs, Energy Efficiency and Renewable Energy, U.S. Department of Energy’s definition of SHGC. SHGC represents the percentage of solar heat gain that is transmitted to the interior through the glass and shading system. If you are using glass whose performance is listed in terms of SC, you may convert to SHGC by multiplying the SC by 0.87.

SHEERWEAVE BASICS - 3%

SHEERWEAVE BASICS - 5%

SHEERWEAVE BASIC3% | 5%

ID COLOR NAME TS RS AS TV 1/8 CL 1/4 CL 1/4 HA 1/2 CL 1 CL 1 HA

SHGC/G VALUE G-TOT (GLASS & BLIND)SOLAR OPTICAL PROPERTIES

ID COLOR NAME TS RS AS TV 1/8 CL 1/4 CL 1/4 HA 1/2 CL 1 CL 1 HA

SHGC/G VALUE G-TOT (GLASS & BLIND)SOLAR OPTICAL PROPERTIES

P02 White 15 64 21 16 0.28 0.29 0.28 0.27 0.27 0.22P04 White/Bone 12 58 30 11 0.32 0.32 0.30 0.30 0.30 0.23P05 White/Platinum 8 50 42 8 0.36 0.36 0.31 0.34 0.33 0.25V21 Charcoal 1 4 95 2 0.64 0.60 0.44 0.60 0.54 0.37V22 Charcoal/Gray 1 8 91 2 0.61 0.57 0.43 0.57 0.52 0.36V24 Charcoal/Chest. 1 5 94 1 0.62 0.58 0.44 0.58 0.53 0.37

P02 White 19 68 13 17 0.29 0.29 0.28 0.27 0.27 0.22P04 White/Bone 16 60 24 14 0.33 0.32 0.30 0.30 0.30 0.23P05 White/Platinum 11 53 36 11 0.36 0.36 0.31 0.34 0.33 0.25V21 Charcoal 6 4 90 6 0.64 0.61 0.44 0.61 0.72 0.37V22 Charcoal/Gray 7 9 84 7 0.61 0.58 0.43 0.57 0.70 0.36V24 Charcoal/Chest. 7 6 87 8 0.64 0.60 0.44 0.59 0.54 0.37