8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2

1/3

Preparing a USB Flash Drive for Local Commissioning Confidential

2013-06-17 Huawei Proprietary - Restricted Distribution Page1, Total3

Preparing a USB Flash Drive for Local Commissioning

4GeNodeB

This document will describe how to load both software and config on Huawei eNodeB

using a USB dongle.

Version Control

Version 0.1 Initial design Radu Manea

raducu.manea@huawei.com

Version 0.2 Step 4 (adding BRD type) Radu Manea

Check listdo not go on site without the below items:

1. USB dongle provided by Huawei (The USB dongle must be Huawei issued)

2. eNodeB software - SPC375

File name: BTS3900 V100R007C00SPC265 Version(eNodeB

V100R005C00SPC375 Version).part01part10.rar.

File size: 10 x 35 MB

File location: Teamspace - UK VDF MORAN Project

http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx

Download 10 files from: Project General Documents >SOFTWARE >4G LTE

eNodeB SPC375

Extract the files on the USB dongle.

After extracting the dongle will have a single folder named eNodeB, this

folder will contain the Software folder. This step does not need to be

repeated for the next eNodeB.

http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx

8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2

2/3

Preparing a USB Flash Drive for Local Commissioning Confidential

2013-06-17 Huawei Proprietary - Restricted Distribution Page2, Total3

3. eNodeB config

This step will describe how to load the config file. Please note that each site will require a

new config. If the dongle has been used to commission other sites please remove previousconfig files.

Config location: Teamspace - UK VDF MORAN Project

http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx

Download config from: Project General Documents > DEPLOYMENT > 4G eNodeB

config files

Please extract the downloaded file on the USB dongleExample: extract on F:\ without selecting any folder, after extraction the USB should look like

below:

http://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspxhttp://app-301.huawei.com/sites/ukvdfmoran/SitePages/Home.aspx

8/12/2019 SHARE_Preparing a USB Flash Drive for Local Commissioning ENodeB 4G V0.2

3/3

Preparing a USB Flash Drive for Local Commissioning Confidential

2013-06-17 Huawei Proprietary - Restricted Distribution Page3, Total3

4. Connect the dongle in the LTE BBUs USB port on the UMPTa2

and wait 20 minutes

After 20 minutes the eNodeB will be operational.