Seven Channel Remote Control · Seven Channel Remote Control . The Versa7 is designed to remotely...
Transcript of Seven Channel Remote Control · Seven Channel Remote Control . The Versa7 is designed to remotely...
WARRANTY STATEMENT
Iowa Export-Import warrants this product to be free form defects in ma-
terial and workmanship for a period of one (1) year from the date of sale
to the original purchaser, and not more than two (2) years form the date
of manufacture. Iowa Export-Import will repair or replace this product
free of charge if, in the judgment of Iowa Export-Import it has been
proven defective within the warranty period. The product should be re-
turned at customer expense, to Iowa Export-Import, 512 Tuttle Street,
Des Moines, Iowa 50309. This warranty does not cover any expense
incurred in the removal and/or reinstallation of the product.
This warranty does not apply to any product damaged by improper in-
stallation, accident, misuse, improper line voltage, water (unless the
product is specified to be IP65 compliant), alteration or repairing by
anyone other than Iowa Export-Import.
This warranty is in lieu of other warranties expressed or implied, includ-
ing warranty of merchantability. No person is authorized to assume for
Iowa Export-Import any other liability concerning the sale of this prod-
uct.
Seven Channel Remote Control
The Versa7 is designed to remotely control up to seven devices, or functions. All seven functions can be con-trolled with the supplied four button remote control. Channels 1 and 2 are tied to onboard 30 AMP relays and may be used to control two functions up to 30 AMPs directly. Channels 3—7 are electronic outputs with a 500 milliamp current limitation. Typically these outputs are connected to a relay/s for control functions. These optional relays are not part of this kit. Proper wiring is critical to the correct operation of this product. Make sure that all wires are properly con-nected, properly grounded, and free of potential dam-age, and correctly fused. Please refer to the wiring dia-grams in the following pages.
For technical assistance please call:
515-283-3900
Versa7 Kit Contents Page 1
Installation Notes
Page 10
TY
PIC
AL
WIR
ING
V
ehic
le D
oor
Lock
ing
Circ
uit
Cha
nnel
s 1
and
2 U
sing
Opt
iona
l Doo
r Lo
ck S
olen
oids
Page 9
Basic Functions Of The Remote Control
Remote Control Operation
Channel 1: Onboard relay Channel 2: Onboard relay Channel 3: Channel 4: Channel 5: Channel 6: Channel 7:
The remote control supplied with your kit has four buttons, but is capa-ble of controlling 7 Channels.
Optional negative outputs (500 mA) **Additional relays are required for each channel**
To Operate: Press:
Channel 1 Button 1
Channel 2 Button 2
Channel 3 Button 3
Channel 4 Button 4
Channel 5 Button 1 + Button 2
Channel 6 Button 1 + Button 3
Channel 7 Button 1 + Button 4
Remote Control Programming Reprogramming the Remote Transmitters: The remote transmitters are shipped Pre-Programmed. In the event that a remote transmitter loses the programmed code, or if you wish to add more remote transmitters, follow these steps: • Make sure ignition is OFF. • Locate the programming button located on the side of the receiver
next to the LED. • Press the programming button 3 times quickly (the LED will light). • Press Button (1) on each transmitter you want learned in to the re-
ceiver (one at a time). There is a 10 second window to learn all new transmitters.
• The LED will remain lit for approximately 10 seconds after the last been recognized.
• Wait for the LED to go out. Then test each transmitter for proper function.
Page 2
Components Identification
Remote Programming Button LED Light
DIP Switches
Jumpers DO NOT MOVE POSTION UNLESS INSTRUCTED BY TECHNICAL SUPPORT
10 Pin Connector Main Harness Plug
1/4” Male Spade Connectors CH1 & CH2 Outputs
Mounting Considerations
Choose your mounting location carefully. The Versa7 should be se-curely mounted in an area that will remain dry, and not be subject to excessive shock and vibration. Additionally, try not to mount the Ver-sa7 in a fully enclosed metal area, this will affect the operational range of the unit.
THE VERSA7 RECEIVER AND REMOTE CONTROL UNITS ARE NOT WATERPROOF. WARRANTY WILL NOT BE APPLICABLE TO
UNITS THAT HAVE BEEN EXPOSED TO WATER.
Page 3
SIDE A
SIDE B
SIDE C
TY
PIC
AL
WIR
ING
S
ingl
e M
otor
Rev
ersi
ng C
ircui
t C
hann
els
3 an
d 4
Usi
ng O
ptio
nal A
utom
otiv
e R
elay
s
Page 8
TY
PIC
AL
WIR
ING
S
ingl
e M
otor
Rev
ersi
ng C
ircui
t C
hann
els
1 an
d 2
Usi
ng O
nboa
rd R
elay
s
Page 7
DIP Switch Settings D
IP S
WIT
CH
FU
NC
TIO
NS
D
IP
SW
O
FF
ON
1 C
hann
el 1
P
rovi
des
rela
y ou
tput
as
long
as
trans
mitt
er
butto
n is
pre
ssed
.
Cha
nnel
1 R
elay
P
rovi
des
rela
y pu
lse
outp
ut fo
r .5
sec
onds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
2 C
hann
el 2
P
rovi
des
rela
y ou
tput
as
long
as
trans
mitt
er
butto
n is
pre
ssed
.
Cha
nnel
2
Pro
vide
s re
lay
puls
e ou
tput
for
.5 s
econ
ds w
hen
trans
mitt
er b
utto
n is
pre
ssed
. 3
No
func
tion.
If
Cha
nnel
1, o
r 2
rece
ive
a si
gnal
8 o
r m
ore
times
with
in 2
0 se
cond
s ch
anne
l 1 &
2 w
ill b
e de
activ
ated
for
30 s
econ
ds th
en r
eset
to n
orm
al.
4 N
ot u
sed.
5 N
ot u
sed.
6 C
hann
el 6
P
rovi
des
(-)
500m
A o
utpu
t as
long
as
trans
-m
itter
but
ton
is p
ress
ed.
Pro
vide
s (-
) 500
mA
pul
se o
utpu
t for
.5 s
econ
ds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
Tie
s ch
anne
l 6 w
ith c
hann
els
1 &
2. W
hen
eith
er
chan
nel 1
or
2 ar
e ac
tivat
ed c
hann
el 6
will
als
o ou
tput
. Typ
ical
ly u
sed
as “L
ight
Fla
sh” i
f Ver
sa7
is u
sed
as a
key
less
ent
ry s
yste
m.
7 C
hann
el 7
P
rovi
des
(-)
500m
A o
utpu
t as
long
as
trans
-m
itter
but
ton
is p
ress
ed.
Pro
vide
s (-
) 500
mA
pul
se o
utpu
t for
.05
seco
nds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
Tie
s ch
anne
l 7 w
ith c
hann
els
1 &
2. W
hen
eith
er
chan
nel 1
or
2 ar
e ac
tivat
ed c
hann
el 7
will
als
o ou
tput
. Typ
ical
ly u
sed
as “
Hor
n H
onk”
if V
ersa
7 is
use
d as
a k
eyle
ss e
ntry
sys
tem
. 8
Not
use
d.
Refer to the table below for DIP switch settings and special functions. The default position for all DIP switches is OFF.
Page 4
Wiring Harness Information See the diagram below for wiring harness and connections informa-tion.
Page 5
TY
PIC
AL
WIR
ING
C
hann
els
3—7
Opt
iona
l Out
put R
elay
Wiri
ng
Pos
itive
and
Neg
ativ
e O
utpu
t Var
iatio
ns
Typical Wiring Diagrams The next several pages contain a number of typical applications for the Versa7 remote control system.
Page 6
Wiring Harness Information See the diagram below for wiring harness and connections informa-tion.
Page 5
TY
PIC
AL
WIR
ING
C
hann
els
3—7
Opt
iona
l Out
put R
elay
Wiri
ng
Pos
itive
and
Neg
ativ
e O
utpu
t Var
iatio
ns
Typical Wiring Diagrams The next several pages contain a number of typical applications for the Versa7 remote control system.
Page 6
TY
PIC
AL
WIR
ING
S
ingl
e M
otor
Rev
ersi
ng C
ircui
t C
hann
els
1 an
d 2
Usi
ng O
nboa
rd R
elay
s
Page 7
DIP Switch Settings
DIP
SW
ITC
H F
UN
CT
ION
S
DIP
S
W
OFF
O
N
1 C
hann
el 1
P
rovi
des
rela
y ou
tput
as
long
as
trans
mitt
er
butto
n is
pre
ssed
.
Cha
nnel
1 R
elay
P
rovi
des
rela
y pu
lse
outp
ut fo
r .5
sec
onds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
2 C
hann
el 2
P
rovi
des
rela
y ou
tput
as
long
as
trans
mitt
er
butto
n is
pre
ssed
.
Cha
nnel
2
Pro
vide
s re
lay
puls
e ou
tput
for
.5 s
econ
ds w
hen
trans
mitt
er b
utto
n is
pre
ssed
. 3
No
func
tion.
If
Cha
nnel
1, o
r 2
rece
ive
a si
gnal
8 o
r m
ore
times
with
in 2
0 se
cond
s ch
anne
l 1 &
2 w
ill b
e de
activ
ated
for
30 s
econ
ds th
en r
eset
to n
orm
al.
4 N
ot u
sed.
5 N
ot u
sed.
6 C
hann
el 6
P
rovi
des
(-)
500m
A o
utpu
t as
long
as
trans
-m
itter
but
ton
is p
ress
ed.
Pro
vide
s (-
) 500
mA
pul
se o
utpu
t for
.5 s
econ
ds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
Tie
s ch
anne
l 6 w
ith c
hann
els
1 &
2. W
hen
eith
er
chan
nel 1
or
2 ar
e ac
tivat
ed c
hann
el 6
will
als
o ou
tput
. Typ
ical
ly u
sed
as “L
ight
Fla
sh” i
f Ver
sa7
is u
sed
as a
key
less
ent
ry s
yste
m.
7 C
hann
el 7
P
rovi
des
(-)
500m
A o
utpu
t as
long
as
trans
-m
itter
but
ton
is p
ress
ed.
Pro
vide
s (-
) 500
mA
pul
se o
utpu
t for
.05
seco
nds
whe
n tra
nsm
itter
but
ton
is p
ress
ed.
Tie
s ch
anne
l 7 w
ith c
hann
els
1 &
2. W
hen
eith
er
chan
nel 1
or
2 ar
e ac
tivat
ed c
hann
el 7
will
als
o ou
tput
. Typ
ical
ly u
sed
as “
Hor
n H
onk”
if V
ersa
7 is
use
d as
a k
eyle
ss e
ntry
sys
tem
. 8
Not
use
d.
Refer to the table below for DIP switch settings and special functions. The default position for all DIP switches is OFF.
Page 4
Components Identification
Remote Programming Button LED Light
DIP Switches
Jumpers DO NOT MOVE POSTION UNLESS INSTRUCTED BY TECHNICAL SUPPORT
10 Pin Connector Main Harness Plug
1/4” Male Spade Connectors CH1 & CH2 Outputs
Mounting Considerations
Choose your mounting location carefully. The Versa7 should be se-curely mounted in an area that will remain dry, and not be subject to excessive shock and vibration. Additionally, try not to mount the Ver-sa7 in a fully enclosed metal area, this will affect the operational range of the unit.
THE VERSA7 RECEIVER AND REMOTE CONTROL UNITS ARE NOT WATERPROOF. WARRANTY WILL NOT BE APPLICABLE TO
UNITS THAT HAVE BEEN EXPOSED TO WATER.
Page 3
SIDE A
SIDE B
SIDE C
TY
PIC
AL
WIR
ING
S
ingl
e M
otor
Rev
ersi
ng C
ircui
t C
hann
els
3 an
d 4
Usi
ng O
ptio
nal A
utom
otiv
e R
elay
s
Page 8
TY
PIC
AL
WIR
ING
V
ehic
le D
oor
Lock
ing
Circ
uit
Cha
nnel
s 1
and
2 U
sing
Opt
iona
l Doo
r Lo
ck S
olen
oids
Page 9
Basic Functions Of The Remote Control
Remote Control Operation
Channel 1: Onboard relay Channel 2: Onboard relay Channel 3: Channel 4: Channel 5: Channel 6: Channel 7:
The remote control supplied with your kit has four buttons, but is capa-ble of controlling 7 Channels.
Optional negative outputs (500 mA) **Additional relays are required for each channel**
To Operate: Press:
Channel 1 Button 1
Channel 2 Button 2
Channel 3 Button 3
Channel 4 Button 4
Channel 5 Button 1 + Button 2
Channel 6 Button 1 + Button 3
Channel 7 Button 1 + Button 4
Remote Control Programming Reprogramming the Remote Transmitters: The remote transmitters are shipped Pre-Programmed. In the event that a remote transmitter loses the programmed code, or if you wish to add more remote transmitters, follow these steps: • Make sure ignition is OFF. • Locate the programming button located on the side of the receiver
next to the LED. • Press the programming button 3 times quickly (the LED will light). • Press Button (1) on each transmitter you want learned in to the re-
ceiver (one at a time). There is a 10 second window to learn all new transmitters.
• The LED will remain lit for approximately 10 seconds after the last been recognized.
• Wait for the LED to go out. Then test each transmitter for proper function.
Page 2
The Versa7 is designed to remotely control up to seven devices, or functions. All seven functions can be con-trolled with the supplied four button remote control. Channels 1 and 2 are tied to onboard 30 AMP relays and may be used to control two functions up to 30 AMPs directly. Channels 3—7 are electronic outputs with a 500 milliamp current limitation. Typically these outputs are connected to a relay/s for control functions. These optional relays are not part of this kit. Proper wiring is critical to the correct operation of this product. Make sure that all wires are properly con-nected, properly grounded, and free of potential dam-age, and correctly fused. Please refer to the wiring dia-grams in the following pages.
For technical assistance please call:
515-283-3900
Versa7 Kit Contents Page 1
Installation Notes
Page 10
WARRANTY STATEMENT
Iowa Export-Import warrants this product to be free form defects in ma-
terial and workmanship for a period of one (1) year from the date of sale
to the original purchaser, and not more than two (2) years form the date
of manufacture. Iowa Export-Import will repair or replace this product
free of charge if, in the judgment of Iowa Export-Import it has been
proven defective within the warranty period. The product should be re-
turned at customer expense, to Iowa Export-Import, 512 Tuttle Street,
Des Moines, Iowa 50309. This warranty does not cover any expense
incurred in the removal and/or reinstallation of the product.
This warranty does not apply to any product damaged by improper in-
stallation, accident, misuse, improper line voltage, water (unless the
product is specified to be IP65 compliant), alteration or repairing by
anyone other than Iowa Export-Import.
This warranty is in lieu of other warranties expressed or implied, includ-
ing warranty of merchantability. No person is authorized to assume for
Iowa Export-Import any other liability concerning the sale of this prod-
uct.
Seven Channel Remote Control